cpfeiffer
39d84831ed
Unset dynamic device state (like battery level, etc.) when disconnected
2015-05-10 00:05:29 +02:00
cpfeiffer
1a7c3c42e4
Do both BT and BTLE discovery (one after another) #33
2015-05-09 23:54:47 +02:00
cpfeiffer
60210e069c
Fix validity check with gender and type
2015-05-09 23:13:47 +02:00
cpfeiffer
29cc364f8a
Updated translations
2015-05-09 21:47:03 +02:00
cpfeiffer
ab5d5f6c6f
Made Mi Band preferences localizable
2015-05-09 21:43:04 +02:00
Andreas Shimokawa
8112d4afd8
update stings
2015-05-08 12:56:17 +02:00
Andreas Shimokawa
6f162c593b
Pebble message intent notifications default to "never" now
...
If these get turned on, Conversations notifications will be handled through Pebble message intents and get filtered out from generic notifcation handling.
2015-05-08 12:50:42 +02:00
Andreas Shimokawa
c999c52501
convert sequence of ifs to switch
2015-05-08 11:18:06 +02:00
cpfeiffer
ddc2f116aa
Updated German translation
2015-05-08 00:48:51 +02:00
cpfeiffer
d036f0539d
Added missing resource strings and clean up layouts
2015-05-08 00:42:46 +02:00
cpfeiffer
9801a94704
Revert "Updated translation from transifex"
...
This reverts commit 45fde87df6
2015-05-07 23:56:04 +02:00
cpfeiffer
45fde87df6
Updated translation from transifex
2015-05-07 23:54:59 +02:00
cpfeiffer
b2518ff927
Discovery + pairing now works
...
User info is asked on demand before starting the actual pairing.
When no (valid) user info is given, dummy user infor will be used instead.
2015-05-07 23:52:44 +02:00
Andreas Shimokawa
157deff237
Send current time to device if time/timezone changes. Closes #51 .
2015-05-07 23:46:18 +02:00
Andreas Shimokawa
70889e5326
fix italian string, which would cause FC
2015-05-07 22:32:30 +02:00
cpfeiffer
1604ae2c22
#33 only start discovery activity when bt is enabled
2015-05-07 22:15:53 +02:00
cpfeiffer
cf360455a0
updated translations from transifex
2015-05-07 22:05:57 +02:00
cpfeiffer
84a89c7c9b
ignore values-en, always created by tx pull -a
2015-05-07 20:46:24 +02:00
cpfeiffer
a23690c8e1
Initial support for Mi Band specific settings
...
(User info for now).
TODO: We need to have that information *before* starting a connect
2015-05-07 01:32:17 +02:00
Andreas Shimokawa
44333c4244
Fix some German strings, simplify SMS/K9-Mail strings
2015-05-07 00:11:43 +02:00
Andreas Shimokawa
8b75440867
Pebble: feed WeatherNeat with bogus data (testing)
...
This is completely useless, but it is the first time I could successfully send
data to a watchface.
2015-05-06 23:47:58 +02:00
cpfeiffer
fa57bf11a2
Fix some German translations
2015-05-06 23:16:15 +02:00
cpfeiffer
637cc3be51
Connected devices are typically not discoverable ( #33 )
2015-05-06 23:00:06 +02:00
cpfeiffer
0c039b8a46
Start discovery activity automatically when no devices available ( #33 )
2015-05-06 22:59:31 +02:00
cpfeiffer
0629d6aa5d
Small improvements to discovery, only scan for 1min #33
2015-05-06 22:59:00 +02:00
cpfeiffer
dbffd5a42f
Updated translations from transifex ( #46 )
...
Needed to use pull -a to get new languages (here: italian)
2015-05-06 17:39:46 +02:00
Andreas Shimokawa
33db0bf890
Pebble: handle DATALOG and PHONEVERSION endpoints directly in protocol
...
This allows to remove all protocol inspection in PebbleIoThread
2015-05-06 11:43:01 +02:00
cpfeiffer
7b02548427
Clear task stack after discovery ( #33 )
2015-05-06 00:17:28 +02:00
cpfeiffer
dc6fd8cb61
Translation updated from Transifex
2015-05-05 23:39:47 +02:00
cpfeiffer
50034e0bfe
Request battery info in initialize()
2015-05-05 23:25:54 +02:00
Andreas Shimokawa
3e85efa898
Display battery level if known. Should work on Miband, untested.
2015-05-05 22:52:25 +02:00
Andreas Shimokawa
9efcd8974d
Add GBDeviceCommandSendBytes for generic pre encoded commands that are meant to be send to a device directly
...
This is useful for Debugging. We can now send answers to data from the Device directly
int he procol implementation without messing with code in the GBDEviceIoThread's implementation.
This commit also adds test code for interaction with WeatherNeat (so far nothing works though)
2015-05-05 14:41:10 +02:00
Andreas Shimokawa
d09b5442cf
Put FW/HW info inside its own TextView to cleanup the device list
2015-05-05 11:16:57 +02:00
cpfeiffer
cf12c78a64
Ensure that discovery doesn't display duplicates ( #33 )
2015-05-05 01:08:30 +02:00
cpfeiffer
9df661bd96
Initial (ugly) support for device discovery and pairing ( #3 )
2015-05-05 00:48:54 +02:00
Andreas Shimokawa
e859ece7c6
Add Support for notifications send to Pebble from 3rd party applications
...
This enables support for Conversations without using generic notificaion support.
Other applications could also work partly but are untested.
This commit also changes the SettingsActivity to use Comboboxes instead of two
Checkboxes for each notification source.
2015-05-04 01:03:56 +02:00
Andreas Shimokawa
6d1a4312ef
remove unused ApplicationTest
2015-05-03 19:19:05 +02:00
xphnx
cac3bc01a9
Update strings.xml
2015-05-01 17:20:17 +02:00
Andreas Shimokawa
93b463c47e
update German translation
2015-05-01 10:08:24 +02:00
cpfeiffer
3e79269d43
#46 add missing GBApplication
2015-05-01 09:36:33 +02:00
Andreas Shimokawa
f143c9ec54
androidstudio vs. eclipse :/
2015-05-01 01:49:43 +02:00
cpfeiffer
8b3b4d0882
#46 make all strings localizable
2015-05-01 01:26:30 +02:00
Andreas Shimokawa
75b9d0e833
simplyfy SettingsActiviy code
2015-05-01 00:56:16 +02:00
Andreas Shimokawa
b256c9ed15
set utf-8
2015-04-30 00:58:04 +02:00
Andreas Shimokawa
959626049e
add Spanish translation (thanks xphnx!)
2015-04-30 00:57:36 +02:00
Andreas Shimokawa
f8bbbdb47c
add Korean translation (thanks halcyonera!)
2015-04-30 00:54:32 +02:00
Andreas Shimokawa
b7c3578e5b
add German translation (quick & dirty)
2015-04-30 00:50:16 +02:00
Andreas Shimokawa
e65c492792
Pebble: display progressbar during installation of apps/firmware
2015-04-29 00:21:02 +02:00
Andreas Shimokawa
01e96f9c8d
Pebble: Bugfix for beeing stuck while waiting for a slot, when none is available
2015-04-28 23:35:12 +02:00
Andreas Shimokawa
31b01d860f
Pebble: notification cleanups
...
- remove notification update code from PebbleIoThread (is in generic code now)
- use a separate notification for app/firmware installation
2015-04-28 21:59:53 +02:00
cpfeiffer
5a458611e2
Set the time during initialization. Necessary for steps tracking.
...
Also see #31
2015-04-27 21:43:57 +02:00
cpfeiffer
8e25c03350
display connection state in notification area
2015-04-27 21:19:09 +02:00
Andreas Shimokawa
462f9f028f
Pebble: do not call setReceiversEnableState() from PebbleIoThread anymore, handling had been moved to generic code
2015-04-27 01:24:42 +02:00
Andreas Shimokawa
2eb62ebff3
Pebble: Speed up app/firmware installation by sending 2000 bytes at once instead of 512. Closes #22 .
2015-04-27 01:15:03 +02:00
Andreas Shimokawa
c06ef3d260
Pebble: try to shut up datalog, which might cause battery drain on the watch
2015-04-26 01:43:24 +02:00
Andreas Shimokawa
613ff1fc91
Pebble: corrections to PebbleIoThreads, better logging
2015-04-26 00:54:41 +02:00
cpfeiffer
0377a751b0
be even more robust #35
2015-04-25 23:49:07 +02:00
cpfeiffer
1772076b62
Log service creation and destruction
2015-04-25 23:49:07 +02:00
Andreas Shimokawa
442ae6499a
Pebble: Better logging and hexdump for short packages to endpoint 6778
2015-04-25 23:13:22 +02:00
cpfeiffer
c773181da3
Request and display device info (connection state and firmware version)
...
- request device info initially (connection state)
- request device info (firmware) when connected
This also fixes the wrong connection state being displayed on
orientation change.
2015-04-24 23:09:35 +02:00
cpfeiffer
274e8591dc
Initialize the BTLE device after the services are discovered.
...
This hopefully helps with the MI Band automatically disconnecting.
2015-04-24 22:21:35 +02:00
Daniele Gobbetti
98696ce9e2
Implement setting the time on the miband.
...
It works from the debug activity, since I am not sure about the value of
the ts argument, it always sets the current time.
2015-04-23 14:11:57 +02:00
cpfeiffer
cf681a089a
Add the device if it's not in the list yet.
2015-04-22 20:38:05 +02:00
cpfeiffer
1ff1c20056
Some more logging
2015-04-22 20:38:04 +02:00
Andreas Shimokawa
ab2f5a73a8
Quick fix for crash when connecting to a Miband with invalid address in settings.
2015-04-21 22:35:11 +02:00
cpfeiffer
06d8488792
#15 log as info, not error
2015-04-20 23:45:34 +02:00
Andreas Shimokawa
b391128a56
Merge branch 'master' of https://github.com/Freeyourgadget/Gadgetbridge
2015-04-20 23:39:02 +02:00
Andreas Shimokawa
661ed9c612
Pebble: When opening a firmware print for which HW revision it is.
2015-04-20 23:38:00 +02:00
cpfeiffer
1e3ba57b03
fix unpaired MI devices disappearing from view ( #15 )
2015-04-20 23:25:46 +02:00
cpfeiffer
f6208f1031
fix warning
2015-04-20 22:44:22 +02:00
Andreas Shimokawa
33d86de923
move external receivers to externalevents/ directory
2015-04-20 22:39:35 +02:00
cpfeiffer
93b18d0d0b
log when receivers are enabled/disabled
2015-04-20 22:04:14 +02:00
cpfeiffer
515c456605
#15 keep the broadcast receivers enabled when device uses autoconnect
2015-04-20 22:02:06 +02:00
cpfeiffer
4bdeabf4ea
set deviceSupport to null after disposing it
2015-04-20 21:45:52 +02:00
Andreas Shimokawa
5487dfd348
Pebble app installation: Only enable install button when device is connected, for firmware also check hardware revision
2015-04-20 20:49:14 +02:00
Andreas Shimokawa
412c771d59
fix crash
2015-04-20 20:48:52 +02:00
Andreas Shimokawa
a12a76313c
do not append Miband to device list if it has already been added as the connected device before
2015-04-20 19:32:12 +02:00
Andreas Shimokawa
16ea52e83c
add hardware revision string to GBDevice, get and display HW Revision from Pebble
2015-04-20 12:48:32 +02:00
Andreas Shimokawa
fbbc808ca8
Make GBDevice parcable to make passing it via Intents more convinient
2015-04-20 11:58:59 +02:00
Andreas Shimokawa
cd0139cd7c
add isConnecting() method to GBDevice
2015-04-20 10:50:30 +02:00
cpfeiffer
4a1a1d59be
battery info hooked in, dummy for pebble
2015-04-19 22:31:09 +02:00
cpfeiffer
686ed312d6
#15 properly return firmware version
2015-04-19 22:23:53 +02:00
cpfeiffer
2dcd95a1f5
#15 support for reading firmware version and battery info
2015-04-19 22:20:47 +02:00
cpfeiffer
28272714aa
remove whitespace
2015-04-19 21:50:01 +02:00
cpfeiffer
54784100b8
use isConnected() rather than getState() == CONNECTED
...
because getState() == INITIALIZED implies CONNECTED
2015-04-19 15:56:32 +02:00
Andreas Shimokawa
95d656d345
reformat code with androidstudio :P
2015-04-19 15:27:16 +02:00
cpfeiffer
7b433f0d18
add state string for INITIALIZED
2015-04-19 15:21:15 +02:00
cpfeiffer
2b1157ca67
#15 : notify on incoming calls
2015-04-19 15:15:53 +02:00
cpfeiffer
24c3903eef
#15 update device state to INITIALIZED when user info was sent
2015-04-19 15:11:50 +02:00
cpfeiffer
0e34a449ca
Register with the LocalBroadcastManager for device_changed
...
Otherwise intents sent with LocalBroadcastManager won't ever arrive.
2015-04-19 15:11:03 +02:00
cpfeiffer
7b4c7926d3
Listen to device_changed in addition to refresh_device_list
2015-04-19 15:09:27 +02:00
cpfeiffer
88e2b7ff99
#15 automatically toggle the broadcast receiver using connectoin status
...
Makes "real" notifications where for the MI Band, not just those from
the debug activity.
2015-04-19 14:35:28 +02:00
Andreas Shimokawa
b74319fee9
Make list refresh automatically when Miband MAC was entered or removed. Update README.md
2015-04-19 12:35:23 +02:00
Andreas Shimokawa
dd12bb11b2
reformat code with androidstudio
2015-04-19 11:28:03 +02:00
cpfeiffer
09914e6da0
#15 Initial support for MI Band
...
1) The MAC address has to be added manually for now (Settings -> Debug)
2) Configure other notifications as desired
3) After doing that, restart Gadgetbridge, after that, the device should
be visible.
4) Tap it to connect
5) Try the Debug activity via the Menu to send some dummy notifications
=> Your MI should vibrate and blink
Also: add some extra files necessary to support Eclipse ADT. To be
migrated to Andmore, later.
2015-04-19 02:37:29 +02:00
Andreas Shimokawa
7c60e4b595
Pebble: Firmware upgrade support
2015-04-17 12:23:19 +02:00
Andreas Shimokawa
90f2b4ded3
Pebble app installation: Use data (filenames, sizes and crc) from manifest.json ( Fixes #16 )
...
Also remove STM32CRC.java, which had broken tail code, we use the crc from the manifest now.
2015-04-17 00:57:50 +02:00
Andreas Shimokawa
47fd1a7dff
move PebbleProtocol.java, update CHANGELOG.md
2015-04-15 00:06:42 +02:00
Andreas Shimokawa
7ad1bfbdb1
reformat code with androidstudio
2015-04-14 10:29:09 +02:00
cpfeiffer
dbb0d85165
Added missing dispose() method
2015-04-14 02:04:59 +02:00
cpfeiffer
d0ff14bc0e
Also move the resource management into DeviceSupport classes
2015-04-14 02:04:58 +02:00
cpfeiffer
1f31c1d79c
Next refactoring: the road to support BT and BT LE
2015-04-14 02:04:34 +02:00
Andreas Shimokawa
0cec658c3a
Implement volume control for Pebble
...
I didn't know how to access this on the pebble until I did a long press on
play/pause ;)
2015-04-13 22:25:23 +02:00
Andreas Shimokawa
40438ebe0e
Revert to previous state if connection fails, this fixes multiple bugs when pebble is reconnecting
2015-04-13 13:26:22 +02:00
Andreas Shimokawa
bb44cb1e19
reformat code with androidstudio
2015-04-13 11:22:03 +02:00
cpfeiffer
62a41ac5be
Fix manual input of bluetooth MAC address
...
(must be uppercase characters)
2015-04-13 01:07:46 +02:00
cpfeiffer
09bb5d4a3e
Refactoring: extracted inner GBDeviceIOThread classes to own files
...
To enable this, extracted some shared functionality into new GB helper
class.
2015-04-13 01:02:26 +02:00
Andreas Shimokawa
b3c036ef3b
add missing files
2015-04-11 01:08:02 +02:00
Andreas Shimokawa
4a697edced
add icon for activity tracker type apps. Thanks xphnx!
2015-04-10 22:26:52 +02:00
Andreas Shimokawa
521dad8c14
Mention the original cpp source from which STM32CRC.java was ported.
2015-04-10 22:10:55 +02:00
Andreas Shimokawa
4ff57dfdab
Feedback for failed and successful installations. Closes #19 .
2015-04-09 18:48:52 +02:00
Andreas Shimokawa
3355be79e6
Filter notifications from com.android.systemui. Should fix #20 .
2015-04-08 22:11:56 +02:00
Andreas Shimokawa
90fe75e044
get free slot always before actually installing a pbw. fixes #17 and #18
2015-04-07 23:57:12 +02:00
Andreas Shimokawa
ebdf514c0e
Pebble app installation: first successful installation :)
...
KNOWN PROBLEMS
- expected filenames inside pbw files are hardcoded (pebble-app.bin etc)
- long delay before installation starts
- must be in app mananger at least once before installation in possible
- errors while installing are not always recognized
2015-04-07 19:33:23 +02:00
Andreas Shimokawa
3498ddfc7a
Pebble: progress with app installtion (CRC, complete install of pebble-app.bin)
...
This is still not working and WIP.
TODO:
- install resources
- install workers
2015-04-06 23:37:17 +02:00
Andreas Shimokawa
2c1cacedb3
Pebble: working on app installation (WIP, do not use)
2015-04-06 20:58:35 +02:00
Andreas Shimokawa
1766c82ab8
In NotificationListener return early if BluetoothCommunicationService is not running
...
This is to pervent our service from being started when we get a notification
even if Gadgetbridge is not in use and no devices are connected.
Unfortunately we cannot enable/disable NotificationListener at runtime like we
do with broadcast receivers because it seems to invalidate the permissions that
are neccessery for NotificationListenerService
2015-04-04 23:20:28 +02:00
Andreas Shimokawa
74f2b8c1c2
fix crash on some devices when creating a test notification in debug menu
2015-04-03 22:39:25 +02:00
Andreas Shimokawa
45631fb14b
workaround for missing Miband pairing (assume Miband when device name is not set)
2015-04-01 23:15:08 +02:00
Andreas Shimokawa
13d734b0f1
add development option to set a miband device address so it appears in our list.
...
This is only meant for future development, there is no MI Band support yet!
2015-04-01 23:00:05 +02:00
Andreas Shimokawa
2c50f95a92
update Pebble icon, add Miband icon
2015-04-01 22:12:49 +02:00
Andreas Shimokawa
71c201beaf
add GBDeviceIoThread class for further device abstraction
...
Also add an empty implementation for the Miband.
Now Gadgedbridges pebbleisms should be removed.
2015-04-01 19:11:18 +02:00
Andreas Shimokawa
ed2e177fcb
Remove direct PebbleProtocol usage. Add GBDeviceProtocol as a base class for all protocols.
...
Also add a empty MibandProtocol
2015-04-01 18:34:52 +02:00
Andreas Shimokawa
9d74cee093
add icons for pebble and watchfaces. Store app type in GBDeviceApp. Store device type in GBDevice.
2015-03-31 23:34:19 +02:00
Andreas Shimokawa
2b31d4b359
fix refresh of device list when bluetooth gets turned on
2015-03-29 23:43:05 +02:00
Andreas Shimokawa
d9a2d85f6d
Fix for DST (summer time), option to sync time on connect (enabled by default)
2015-03-29 17:12:06 +02:00
Andreas Shimokawa
4117444c26
Display app name, company and version when opening a .pbw file from a filemanager
2015-03-28 23:23:10 +01:00
Andreas Shimokawa
d4ff94da4a
Back button for SettingsAvtivity. Remove tablet specific code.
2015-03-28 20:39:46 +01:00
Andreas Shimokawa
b3251a33f2
show hint at the bottom of the Main Activity, update README.md, bump to 0.1.4
2015-03-27 12:33:51 +01:00
Andreas Shimokawa
0dacc1f9c7
make sure Intent broadcasts do not leave Gadgetbridge, add missing xml file
2015-03-27 12:13:19 +01:00
Andreas Shimokawa
b20aaf59a8
enable back navigaton in AppManager and Debug activitys ActionBar
2015-03-27 11:23:30 +01:00
Andreas Shimokawa
6ec1fa9e23
use LocalBroadcastManager
2015-03-27 10:56:08 +01:00
Andreas Shimokawa
42e53c3c8d
support removing apps/watchfaces
2015-03-26 18:11:47 +01:00
Andreas Shimokawa
67a5917597
Change the way how device commands or replys to information requests are passed back to the App
...
This was necessary to pack more complex and more specific information regarding apps etc.
2015-03-26 12:06:26 +01:00
Andreas Shimokawa
0ccb818f58
Added AppManager, does not do anything useful yet. Only lists installed Apps.
2015-03-25 22:23:45 +01:00
Andreas Shimokawa
2e7f45433a
display connection status in the device list
2015-03-22 23:38:51 +01:00
Andreas Shimokawa
ecb7a9f3b5
Remove quit button from the service notification, put a quit item in the context menu instead. Closes #12
2015-03-22 13:10:45 +01:00
Andreas Shimokawa
79c7085264
refresh list of paried devices when bluetooth gets turned on
2015-03-22 12:46:28 +01:00
Andreas Shimokawa
05c07aa611
Get and display Pebble firmware version when connected.
2015-03-22 00:34:54 +01:00
Andreas Shimokawa
4e465928e6
List all suported devices and connect on tap. Remove the connect button.
2015-03-21 18:18:07 +01:00
Andreas Shimokawa
a746ed4a2b
reconnect support. Closes #10
2015-03-18 12:29:10 +01:00
Andreas Shimokawa
d1ea1b9915
quit Gadgetbridge when bluetooth gets turned off
2015-03-17 22:03:54 +01:00
Andreas Shimokawa
a971eca6fd
preparations for acceppting calls
2015-03-17 21:42:31 +01:00
Andreas Shimokawa
c56194c0e5
* Add option to start Gadgetbridge and connect automatically when bluetooth is turned on.
...
This closes #9
2015-03-17 21:41:58 +01:00
Andreas Shimokawa
2260d60bac
K-9 Mail notifications: Hopefully fix #7 and #8
...
K-9 Mail seems to completely ignore the where clause when querying for messages.
That is why we got data from the newest message instead of the one requested.
Work around by walking through the messages and match the uri manually.
This is not as expensive as I thought because in most cases it is the first
message is the one we want anyway.
2015-03-16 16:18:11 +01:00
Andreas Shimokawa
eeb74b4c61
Preferences: "Generic Notification Support" is no longer a checkbox - it now opens the Android Notificaion Permission Dialog
...
If the permission is not granted we wont get notfifications, an extra preference for
Gadgetbridge is pointless, so I removed it.
2015-03-15 21:36:39 +01:00
Andreas Shimokawa
326e079068
fix crash when no Pebble was paired, change version to 0.1.0, build tweaks
2015-03-11 12:40:59 +01:00
Andreas Shimokawa
6fa99082ab
Support for rejecting/ending calls via Pebble buttons
2015-03-07 17:44:39 +01:00
Andreas Shimokawa
85ccafc922
Experiment with styling.
2015-03-07 15:32:34 +01:00
Andreas Shimokawa
4e7553836b
Workaround for non-working outgoing call display. Fixes #6 .
...
This is still a bit ugly because we cannot (yet?) detect whether remote has
taken the call or not. So we will start counting in-call time from the moment
we start dialling.
2015-03-07 14:40:59 +01:00
