Carsten Pfeiffer
4096e50681
Merge pull request #146 from sarg/master
...
Fix DeviceInfo checksum function.
2015-10-19 20:56:49 +02:00
Daniele Gobbetti
cee03debbb
- add code to send the confirmation of the activity data transfer after a timeout.
...
==> This is currently commented out because it was done to solve #141 but while doing this #143 popped out.
- send a stop_sync message to the band if the data doesn't fit the buffer. This way the data remains on the band.
2015-10-19 16:17:03 +02:00
Daniele Gobbetti
6460b391d9
Be dump the content of the notification to the debug log
2015-10-19 15:16:21 +02:00
Sergey Trofimov
94cbf2f301
Fix DeviceInfo checksum function.
2015-10-19 15:02:56 +03:00
cpfeiffer
4e0fed8857
Improvements to how and when alarms are sent to the device
...
They are now sent whenever the Alarms activity is finished.
Display "All alarms disabled" when no alarm is enabled.
Unrelated: pass exceptions to GB.toast() where applicable.
2015-10-18 23:52:59 +02:00
cpfeiffer
86d17c7792
Pass the exception to GB.toast()
2015-10-18 23:43:27 +02:00
cpfeiffer
ef15bf8ce8
Prevent firmware update for Mi Band 1A for now #136
2015-10-18 22:57:04 +02:00
cpfeiffer
dcd776e09a
Attempt to fix never finishing activity data fetching #142
...
(by disabling unrelated notifications)
2015-10-18 22:27:52 +02:00
cpfeiffer
7a44ea9596
Small comment
2015-10-18 21:33:07 +02:00
Sergey Trofimov
d57c6166b9
Fix pairing with MI1A
2015-10-18 21:54:22 +03:00
Sergey Trofimov
7591d4a8af
Fix typo
2015-10-18 18:29:41 +03:00
Sergey Trofimov
a1fd31c260
Show toast when no valid DeviceSupport found for pairing.
2015-10-18 09:34:51 +03:00
Sergey Trofimov
1c1f8e8535
Make DeviceSupportFactory recognize device names starting with MI
2015-10-18 09:20:18 +03:00
Andreas Shimokawa
f0a1d5f8a0
update CHANGELOG.md, bump version, pull translation from transifex (thanks!)
2015-10-18 09:22:11 +09:00
cpfeiffer
b43e96318a
Also support pulldown to sync in ControlCenter #138
...
Should factor out some common code between ChartsActivity
and ControlCenter, though.
2015-10-18 01:39:25 +02:00
cpfeiffer
1e56e540fa
Remove hardcoded equals("MI") in favor of DeviceCoordintator #136
2015-10-18 01:01:13 +02:00
cpfeiffer
45fc2c181c
Add pulldown to sync and tabs in the charts activity #138
2015-10-17 17:10:14 +02:00
Andreas Shimokawa
a9186791dc
register/unregister receivers at runtime instead of enabling/disabling them via packagemanger
2015-10-16 00:23:16 +09:00
Andreas Shimokawa
85777f99e4
bump version to 0.6.3, allow up to ten dots in .pbl file names
2015-10-11 20:51:24 +09:00
Andreas Shimokawa
3410e90fb0
Set allowBackup to false (trying prevent BackupManager from killing us)
...
This could help #134
2015-10-11 10:52:01 +09:00
cpfeiffer
4533ae22ee
Log otherwise uncaught exceptions ( #134 )
2015-10-07 23:32:58 +02:00
Andreas Shimokawa
262271dbd0
Pebble: calculate CRC for language files (.pbl) since they do not have a manifest
...
It should fix installation of all .pbl files (tested with Spanish, German, French and the inofficial Japanese language pack)
This also marks the return of the infamous STM32CRC, this time with hopefully fixed tail code.
2015-10-07 22:29:30 +09:00
Andreas Shimokawa
cd7acf6572
Pebble: Do not reboot after language file installation (does not seem to be necessary)
...
NOTE: This still does not work since crc calculation is missing
2015-10-07 00:44:29 +09:00
Andreas Shimokawa
5860c4f4f9
Pebble: WIP support for flashing language files (.pbl)
...
NOTES:
- YOU SHOULD NOT TRY THIS YET ;)
- This was only tested with the unoffical japansese language pack
- Problably needs proper crc calculation (I just hardcoded the one for the japanese language pack)
2015-10-06 23:56:01 +09:00
cpfeiffer
7dce1d62b0
Updated translations from transifex (thanks!)
2015-10-04 19:49:41 +02:00
Andreas Shimokawa
d21b5e68b5
Pebble: Cleanup AppMessage handlers
2015-10-04 22:53:11 +09:00
Andreas Shimokawa
a4a59f5df4
fix hexdump() when using an offset with -1 as length (= full length)
2015-10-04 22:42:21 +09:00
cpfeiffer
0d27245dd1
Some more translations + reoder live activity layout
2015-10-04 00:17:24 +02:00
cpfeiffer
27aa660ca4
Use proper ellipsis
2015-10-04 00:05:26 +02:00
cpfeiffer
9db7d13a94
Log any exceptions during ble callbacks, if any #91
2015-10-04 00:00:53 +02:00
cpfeiffer
5b8bf468f5
Remove some superfluous checks
2015-10-03 23:52:33 +02:00
cpfeiffer
321c0ff125
Log when we get bogus timestamps #91
2015-10-03 23:42:22 +02:00
cpfeiffer
38c3a41279
Improve logging setup, should hopefully fix #107
2015-10-03 23:26:36 +02:00
cpfeiffer
2231dcbce3
Log GB's version
2015-10-03 22:30:11 +02:00
cpfeiffer
0a7366e458
Updated translations from transifex. Welcome Ukrainian! Thanks!
2015-10-03 21:45:40 +02:00
cpfeiffer
93523d7831
Fix crash introduced by translation before onCreate()
2015-10-03 10:08:48 +02:00
cpfeiffer
d6f9eac711
Revert to previous BLE connection method:
...
- first, connectGatt(true) to support automatic (re-) connection
- second, bluetoothGatt.connect() to connect immediately
2015-10-03 00:21:31 +02:00
cpfeiffer
586d959055
Merge branch 'master' into live-activity-data
2015-10-02 23:49:03 +02:00
cpfeiffer
baa2d0b27a
Displaying live activity data works well enough
2015-10-02 23:38:07 +02:00
cpfeiffer
c9e91bd708
Some work in enabling the history of step count
...
Doesn't work yet.
2015-10-02 00:07:19 +02:00
cpfeiffer
2149b18ae3
Yay, animating live activity data works.
...
Nice hack: MPAndroidChart supports animating values, but only animating
a new entry, going from zero to its actual value. We want to animate
a single entry changing its value.
Since it's just a single entry, we can let a custom animator do this
(without knowledge of any other entries).
2015-10-01 22:36:33 +02:00
Daniele Gobbetti
d14ccf1c5c
Get device name from the BLE Standard Characteristic.
...
Always log read and notify characteristics, even if unhandled.
Changed Log statements for write action to make them clearer.
2015-09-28 16:47:43 +02:00
Daniele Gobbetti
f8edf5c525
Move BLE standard characteristic and services debug names to the right class.
2015-09-28 16:28:08 +02:00
Daniele Gobbetti
18f952250a
First working code for vibrations on firmware version 1.0.10.14
2015-09-28 12:53:42 +02:00
Daniele Gobbetti
deea721090
Add verbatim Official BLE Services, Descriptors and Characteristics.
...
Move the already defined constants to these new classes.
2015-09-28 12:51:01 +02:00
cpfeiffer
4250a002b4
Merge branch 'master' into live-activity-data
2015-09-27 00:16:04 +02:00
cpfeiffer
0395977fde
Some work for properly animating our single (value-changing) entry
2015-09-27 00:10:33 +02:00
Andreas Shimokawa
8fca35f94f
try to fix tests
2015-09-26 22:24:52 +02:00
Andreas Shimokawa
4f5edb7231
update German translation
2015-09-26 21:33:55 +02:00
Andreas Shimokawa
e7e583a5ba
update translations (thanks)
2015-09-26 21:23:20 +02:00
