Daniele Gobbetti
46ee5a5499
Send the wear location (left hand / right hand) to the MiBand.
2015-07-31 16:19:32 +02:00
Daniele Gobbetti
69ddead8fb
Reorder the COMMAND_ constants so that they are in numerical order
2015-07-31 16:19:03 +02:00
Daniele Gobbetti
5b3510fade
Update the firmware-update notification based on the feedback we get from the band.
2015-07-31 16:18:09 +02:00
Daniele Gobbetti
2208d5088b
Remove the timeout and handle the messages that the band sends back to acknowledge its status.
...
This should make the firmware transfer much more reliable and hopefully release-ready.
2015-07-31 12:30:42 +02:00
Daniele Gobbetti
fbbc2afda4
Add a timeout of 1 second before rebooting after firmware update.
2015-07-31 11:28:03 +02:00
Daniele Gobbetti
0a6dc8f7a0
Double the filter sections for opening pebble apps/firmwares and miband firmwares
...
There are some inconsistencies across ROMs: some need the mimetype filter to be present in order to match the file extension, other refuse to do so if the filter is present. Current strategy is to satisfy both requirements by duplicating the filter element.
2015-07-30 17:14:44 +02:00
Andreas Shimokawa
0eeb5a6479
PebbleGadgetBridgeSampleProvider: properly override getID()
2015-07-29 23:28:10 +02:00
Daniele Gobbetti
878afd79df
Allow the user to set the target number of steps for each day (fitness goal), both in the sharedpreferences and in the MiBand.
...
The value is then used in the graphs.
#31 #44
2015-07-29 18:49:16 +02:00
Daniele Gobbetti
27669761bf
Fix potential race condition when counted steps are above the daily target.
...
Also added a few comments wrt the labels and the values of the pie chart.
2015-07-29 18:07:35 +02:00
Daniele Gobbetti
c05cfc775e
New chart showing the steps done today and in the last week.
...
#31 #44
2015-07-29 16:30:19 +02:00
Andreas Shimokawa
f51ffcf16f
Use animated upload icon for installation progress notification
...
Also fix a bug which caused the main gadgetbridge service notification to be reused for the installation notification
2015-07-28 23:10:21 +02:00
Daniele Gobbetti
1bef702485
Send the progress updates from the actual BT transfer, which is where most of the time is spent.
2015-07-28 22:38:52 +02:00
Daniele Gobbetti
23f752dc20
New firmware tested.
2015-07-28 22:03:53 +02:00
Daniele Gobbetti
14f754306d
Use a single queue for the whole firmware transfer.
...
At the moment the progress bar code is not useful because the FW preparation is almost instantly done, and is the BT transfer that takes time.
The transfer happens when the getQueue method is called, and there is no progress info that I can find.
2015-07-28 19:15:25 +02:00
Andreas Shimokawa
732f26823b
move installer progressbar from PebbleIoThread to GB and use that for Mi Band fw installation
2015-07-28 18:44:54 +02:00
Andreas Shimokawa
9f591ef8b5
Refactoring: Merge Pebble app/fw installer activity and Miband firmware update Activity
2015-07-28 17:30:20 +02:00
Andreas Shimokawa
c3853c7735
Merge remote-tracking branch 'origin/firmware_update'
2015-07-28 16:21:57 +02:00
cpfeiffer
858c962dd0
Refactoring #45
...
- add some device and db independent model interfaces for activity samples
- use these model interfaces where possible
- chart activity does not do device dependent rendering anymore and uses
normalized values for all devices
- initial interface for daily summaries
2015-07-28 00:05:05 +02:00
Andreas Shimokawa
91b8d7789d
Pebble: improvemnts for upcoming Gadgetbridge Pebble watchapp
2015-07-27 23:21:06 +02:00
Andreas Shimokawa
dbbcf20bbc
reformat code
2015-07-25 21:52:52 +02:00
Daniele Gobbetti
47cbf68c37
Merge remote-tracking branch 'upstream/master' into firmware_update
2015-07-25 21:36:46 +02:00
Daniele Gobbetti
8f840df5f6
Set GB notification visibility to public.
...
This way on android 5 the status of the connection is shown also on the lockscreen even if the user chose to hide sensible content of the notifications.
2015-07-25 21:14:18 +02:00
cpfeiffer
716bbc7b78
Avoid NPE when fetching activity data:
...
java.lang.NullPointerException: Attempt to write to field 'int nodomain.freeyourgadget.gadgetbridge.miband.MiBandSupport$ActivityStruct.activityDataHolderProgress' on a null object reference
at nodomain.freeyourgadget.gadgetbridge.miband.MiBandSupport.flushActivityDataHolder(MiBandSupport.java:748)
at nodomain.freeyourgadget.gadgetbridge.miband.MiBandSupport.handleActivityNotif(MiBandSupport.java:689)
at nodomain.freeyourgadget.gadgetbridge.miband.MiBandSupport.onCharacteristicChanged(MiBandSupport.java:583)
at nodomain.freeyourgadget.gadgetbridge.btle.BtLEQueue$2.onCharacteristicChanged(BtLEQueue.java:369)
2015-07-25 00:09:24 +02:00
cpfeiffer
a1f60aab91
Fix logging configuration
...
Make sure to not invoke any logging before it is properly configured.
2015-07-25 00:09:24 +02:00
Andreas Shimokawa
49cc4ec9d6
Pebble: for 3.x notification, do not zero parent UUID
...
instead reuse the same reandom UUID again.
2015-07-24 09:33:20 +02:00
Andreas Shimokawa
91cc19befe
Pebble: spoof a newer application version (3.x)
2015-07-24 01:34:50 +02:00
Daniele Gobbetti
f16a96e9b2
Initial support for upgrading firmware of the MiBand.
...
This release seems to be working quite well with respect to the firmware upgrading itself. The user facing part needs more work.
In order to update the firmware one has to:
- open a file ending with .fw
- switch from the firmware upgrade activity to the main one
- connect to the miband
- return to the firmware upgrade activity
- press the "install" button (that became active when the device connection was established)
Caveats:
There are almost no check wrt. the integrity of the firmware files.
2015-07-23 17:14:51 +02:00
Andreas Shimokawa
844d929748
update remaining languages from transifex
...
Please fix the removed strings on transifex. Some of them might have been removed because the original english string has been changed.
2015-07-23 16:00:36 +02:00
Andreas Shimokawa
69f4b11594
update Korean translation from transifex
2015-07-23 15:56:47 +02:00
Andreas Shimokawa
268e658e6f
rename ACTION_INSTALL_PEBBLEAPP to ACTION_INSTALL
2015-07-23 12:09:01 +02:00
Andreas Shimokawa
5c26b2281f
Pebble: try to support notification dismissal on the Pebble Time (completely untested)
2015-07-22 20:53:18 +02:00
Andreas Shimokawa
80e93aeaf7
update CHANGELOG, bump version to 0.4.4 (not yet release time)
2015-07-21 22:55:26 +02:00
cpfeiffer
34dde2eb64
Eek
2015-07-21 22:30:11 +02:00
cpfeiffer
383a300566
Remove superfluous field
2015-07-21 22:29:29 +02:00
cpfeiffer
76fcbfcb52
Move activity data values into a separate struct ( #45 )
...
- saves some memory
- allows us to show the toast for the first chunk only
2015-07-21 22:27:15 +02:00
Andreas Shimokawa
b3a04f7afb
Pebble: more length calculation fixes for 3.x notifications with actions
2015-07-21 22:05:25 +02:00
Andreas Shimokawa
6c1e41b4ec
Pebble: fix some totaly obvious length calculation errors for actionable 3.x notifications
2015-07-21 21:56:11 +02:00
cpfeiffer
3662f32dbf
Remove duplicated constants
2015-07-21 21:42:04 +02:00
cpfeiffer
3590c7c853
Remove inadvertently re-added busy-state handling
2015-07-21 21:40:06 +02:00
Andreas Shimokawa
3c35f94a7e
Pebble: enable dismiss action on FW 3.x if force option is set
...
NOTES:
- Might break notifications altogehter (can't test)
- Cannot work because we do not interpret the response yet.
2015-07-21 21:32:05 +02:00
cpfeiffer
1f2b0329c5
Misc improvelets ( #45 )
2015-07-21 21:24:35 +02:00
Andreas Shimokawa
c9ab10e7e8
Pebble: commit missing PebbleProtocol changes for experimental notification dismissal
2015-07-21 01:33:13 +02:00
Andreas Shimokawa
74e1598bf7
Pebble: add experimental and incomplete support for dismissing 2.x notifications
...
Currently this dismisses all notifications on the Phone-
2015-07-21 01:27:05 +02:00
cpfeiffer
0f6491a11d
More WIP: sync from the charts activity
...
Also add preliminary buttons to go forward/backward in time.
2015-07-21 00:06:20 +02:00
cpfeiffer
13d2c2166c
Let DeviceCoordinator decide which activity to launch on click
2015-07-20 23:57:01 +02:00
cpfeiffer
184e0f2dea
New dependency to format durations (and use that where applicable)
2015-07-20 23:14:08 +02:00
cpfeiffer
4aa80c149c
Add some code to set the Mi Band latency
2015-07-20 21:43:23 +02:00
cpfeiffer
5d121e6e8f
Fix a pointer aliasing issue, add some constants, remove invalid "checkpointing"
2015-07-20 21:41:18 +02:00
Daniele Gobbetti
d967411d70
Add a toast to let the user know about the progress of the transfer.
2015-07-19 16:16:58 +02:00
Daniele Gobbetti
6953086c99
Allow setting alarms once for the next day.
...
(cherry picked from commit 417ea02)
2015-07-19 15:58:30 +02:00
