this PR aims to add device for multiple connected devices at once.
A lot of stuff already works, some things need to be done:
- [x] change DeviceCommunicationService to hold multiple devices and supports
- [x] implement connect / disconnect logic
- [x] widgets, not really suited for multiple devices, so far
- [x] change the notification to show multiple devices
- [ ] change GBDeviceService#onFindDevice and similar API functions to target individual devices, not all connected.
- [x] move auto-reconnect setting to device settings
- [x] fix music event crash
- [x] work out behaviour when pressing "connect" from notification
- [ ] handle service crashes
- [ ] suit coordinator methods for multiple devices of same kind
- [x] change ACL_CONNECTED receiver to connect to devices that are not currently registered in DeviceCommunicationService
- [ ] adjust after-boot auto-connection logic
- [ ] fix hanging device support. Device says disconnected, GB says connected
- [x] firmware updater doesn't work
My attempt to make onFindDevice work was to change the arguments to ```EventHandler#onFindDevice(GBDevice device, boolean start)```.
The Problem is that this forces the device-specific implementations to also accept GBDevice as an argument.
Co-authored-by: Daniel Dakhno <dakhnod@gmail.com>
Co-authored-by: Andreas Shimokawa <shimokawa@fsfe.org>
Co-authored-by: dakhnod <dakhnod@gmail.com>
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2526
Co-authored-by: dakhnod <dakhnod@noreply.codeberg.org>
Co-committed-by: dakhnod <dakhnod@noreply.codeberg.org>
This really seems to be the same device, but it does have a different firmware
and a different bluetooth name.
Do this to prevent cross flashing - which might actually be okay but we do not know.
New Huami Amazfit GTS 2 Mini activity for Outdoor Trekking/Hiking.
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2528
Co-authored-by: Sebastian Krey <skrey@noreply.codeberg.org>
Co-committed-by: Sebastian Krey <skrey@noreply.codeberg.org>
Adds Support for BLDC controller VESC connected to a BLE serial device like an HM10.
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2491
Co-authored-by: dakhnod <dakhnod@noreply.codeberg.org>
Co-committed-by: dakhnod <dakhnod@noreply.codeberg.org>
This PR adds not only the device Bose QC35,
it also adds the following autop-reconnect feature:
When the headphones are turned on, the initiate a connection with the phone.
With this change, GB is notified about said change, and tries to establish a connection to the newly connected device, if the appropriate device setting is set.
The QC35 headpones always have NC turned on after boot, thus the main feature of this implementation is to turn off NC as soon as the headphones are turned on and connected to the phone.
I am open for discussion regarding the implementation, but this seems like a good first proposal.
What is missing is the ability to connect to multiple devices, since in many cases headphones can be connected to the watch simultaniously to a smartwatch or other gadget.
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2520
Co-authored-by: dakhnod <dakhnod@noreply.codeberg.org>
Co-committed-by: dakhnod <dakhnod@noreply.codeberg.org>
- this tries to address a common request to display user data up front
- i would make this via a fragment, but RecyclerView doesn't like Fragments
- (fragments would make it much easier to also add a charts like view,
like we use on the Activity list tab)
- i added configuration that allows to disable it partially or fully
Co-authored-by: Petr Vaněk <vanous@noreply.codeberg.org>
Co-committed-by: Petr Vaněk <vanous@noreply.codeberg.org>
Nothing Ear (1) are wireless earbuds that support active noise
suppression, transparency mode and several gestures.
This initial commit adds support for:
- reading battery level
- setting audio mode
- setting in-ear auto detection
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2403
Co-authored-by: daniele <daniele@noreply.codeberg.org>
Co-committed-by: daniele <daniele@noreply.codeberg.org>
fixup! huamni: send windspeed in beaufort
BipS: send windspeed as km/h
huami: Always send sunrise and sunset
There is no need to look at send_sunrise_sunset, this is peble spesific
because it could be annoying on that platform (an extra line in the
timeline). On huami devices, the watchface desides what to show.
Signed-off-by: Robbert Gurdeep Singh <git@beardhatcode.be>
Mi5: set supportsSunriseSunsetWindHumidity to true
Signed-off-by: Robbert Gurdeep Singh <git@beardhatcode.be>
huamni: send windspeed in beaufort
Signed-off-by: Robbert Gurdeep Singh <git@beardhatcode.be>
Co-authored-by: Robbert Gurdeep Singh <git@beardhatcode.be>
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2247
Co-Authored-By: beardhatcode <beardhatcode@noreply.codeberg.org>
Co-Committed-By: beardhatcode <beardhatcode@noreply.codeberg.org>
