- fix bug that caused the wrong device to be connected sometimes
- add accent color
- add battery status
- remove duplicated title
- allow to connect also before first connection (the last connected device will be used)
- 'ґ' (Cyrillic Small Letter Ghe with Upturn U+0491) / 'Ґ' (Cyrillic Capital Letter Ghe with Upturn U+0490);
- 'є' (Cyrillic Small Letter Ukrainian Ie U+0454) / 'Є' (Cyrillic Capital Letter Ukrainian Ie U+0404);
- 'і' (Cyrillic Small Letter Byelorussian-Ukrainian I U+0456) / 'І' (Cyrillic Capital Letter Byelorussian-Ukrainian I U+0406);
- 'ї' (Cyrillic Small Letter Yi U+0457) / 'Ї' (Cyrillic Capital Letter Yi U+0407)
- Disconnect button if connected
- Fetch activity if connected and supported by device
- (re)connect the last connected device if disconnected
Known bug: In the last case, if multiple devices were connected, the wrong device gets re-connected
- Add preference to enable background JS (default disabled)
- Remove the dummy activity used to create the webview, use ExternalPebbleJSActivity instead
- Add layout for legacy configuration, used if background JS is not enabled
- Create the view upon connecting, not when launching the application
- Remove the generic helpers used to find out if any device would need the background webview
- Drastic refactoring of WebviewSingleton moving internal classes in a new package "webview" in service/devices/pebble
Pebble: Add support for dynamic Pebble background colors
- Add a couple additional icon types
- Add Lighthouse (currently unused)
- Add Transit (public transportation app)
- Tweak the colors on existing icon types
- Implement logic to grab primary (vibrant) color from app logo
- The color will be used when displaying a notification for an app
that does not have any configs bound to it.
- Alter NotificationType to support a color (named pebbleColor)
- Alter the Pebble notification poster to listen to the color from
the notification
- Alter the DeviceCommunicationService to allow for color passthrough.
- Add logic to convert HEX or Integer representations of RGB888 colors
to Pebble RGB222 format.
- make the package name retrieved lowercase.
Fixes: #815
This enables option for multiple button actions according to the "Delay after button action". This broadcast is being sent to the intent
along with button_id extra identifying how many times have the pass been done.
By pass defined number of button presses is meant.
Scan and connection, battery level, firmware version, date and time sync
(along with some other currently hardcoded settings), notification
support, alarm support, and some more.
So we do need to set the language both on change and onCreate()
For some reason, the title bar of the SettingsActivity is not updated on recreate().
Closes#787
As requested in #736, this adds an entry in the settings menu that allows to blacklist certain calendars.
To avoid confusion, all the former blacklist methods and fields have been renamed to apps_blacklist. The new entries are called calendars_blacklist.
Importing the settings has not been tested with the current changes.
Closes#736
Future improvements TODO: The new setting lives in the Pebble section, i believe in the future the blackslist functionality should be centralized and put in the sidebar.
Support is almost on Mi Band 2 level.
What does not work yet:
- flashing firmware files
- taking or rejecting phone calls
- syncing GPS tracks
- sending weather
- notification only include title, not a body
- unknown notification's text is not forwarded to the watch at all (same on Mi Band 2 #754)
JAVA side:
- first trivial handling of ACK/NACK message,
- fake the location age until an update mechanism is implemented,
- make the appmessage parsing more robust,
- comment the forecast mimicked reply as it was wrong and confusing for some watchfaces
JS side: first trivial handling of ACK/NACK message
- add back support for clay that was mistakenly removed
- timestamps are in milliseconds in JS as well
- intercept the whole URL path instead of the last part
- the webview is not static anymore (but its holder is)
- the openweathermap calls of type weather and forecast are now supported (as properly as possible)
- assemble the main JSON messages in the weather receiver, as info are lost afterwards
- switch to Uri parsing instead of String (also unify handling of legacy and new requests)
- attempt to address most of the lints/warnings of AS
- remove printStackTrace in favor of LOG.warn
- rename the createWebView method to getInstance
- remove the stateChangeListener after it has been fired once and remove obsolete code within
- instantiate the jsInterface object only when needed
- use the application context when possible to limit the usage of the mutableContextWrapper
- centralize the logic for skipping unwanted notifications
- use *Compat methods wherever possible
Leaving out the problematic parts (persistent IDs and updating)
- centralize the logic for skipping over unwanted notifications
- use *Compat methods wherever possible
- use unique and persistent ID (update notifications)
- switch to using BigText style by default (since we can now update existing notifications)
- for Pebble: delete and reinsert notification as updating is not possible
- add missing call super.setUp() in LoggingTest
- make use ofGBApplication's logger and db support instead
of adding specific test things. Avoids differences between
the local test things and the global GBApplication instances.
Import and export SharedPreferences
i add function for import and export SharedPreferences setting
when export or import db execute export or import SharedPreferences
for blacklist i preload HashSet
remove the pre-KITKAT checks as the minsupportedversion is KITKAT
fix the currentPosition override
move the returned configuration parsing to onResume method (where it was previously) as it seems more reliable
pass the whole GBDeviceEventAppMessage object, this way the jsInterface in the webview doesn't need to be static anymore
change the way the webview is initialized, this way the context doesn't need to be static anymore
use runOnUiThread instead of the Handler .. MainLooper to post the commands to the webview instance
comment a couple of custom message handler for weather as the watchapp seem to work well with JS alone
add a couple of log messages for debugging
known issue: legacy app configuration pasting does not work.
This should allow watchfaces using openweathermap to run without modification (but we lack the icon ATM). Tested with multifit watchface.
Also centralize the location data in own local class and remove leftover comment.
- cleaned up the DeviceService.connect() variants
- discovery: pass the device candidate around instead of the mac address
Attempts to fix#512, #514, #518
Now native controls seem to work (including datepicker), still the webview is not started upon watchapp start, but when long-pressing each app in the app manager. After the webview is started it will live in the background until device disconnect.
Progress so far:
- webview is created upon watchapp launch
- webview is destroyed after disconnect
- ready event is fired in the background
- showConfiguration is fired upon webview display
HOWTO:
1) Pair you normal Pebble (not necessary if already done), make sure it was connected once
2) Unpair your LE pebble if already paired
3) Switch on "Always prefer BLE" in Pebble Settings
4) Tap on the + in Control Center to add a new device
5) Pair your Pebble-LE XXXX or Pebble Time LE XXXX inside Gadgetbridge's Device Discovery actibity
Now Gadgetbridge will connect to your LE Pebble when tapping on Pebble XXXX if "Always Prefer BLE" option is enabled.
You can easily switch back to classic LE by turning that option off again
- pass service uuids to GBDeviceCandaidate so that DeviceCoordinators
can detect devices by their services.
Note: they should not rely on service uuids being available
- wear location from prefs is sent to the band
- hr measurement during sleep is sent to the band
- date format is sent to the band (date+time or just time)
(TODO: needs preference option)
Close drawer before launching activities (feels sloow).
Implement device deletion (untested).
Add app-management icon, remove tap-connected-device-for-primary-activity, hidden (not removed) text hint.
Use level-list for device icon.
Use the new control center when tapping GB notifications.
Added icons to the legacy control center context menu, perhaps it can be embedded in the card?
Don't take this serious. It will make the "massage device" vibrate when a phone call arrives.
It is inspired by the famous lawsuit[1] which has nothing to do with the Vibratissimo device maker.
After reading this I picked up the cheapest ble massage device just to see if we could support it.
And yes, we can.
[1] http://arstechnica.com/wp-content/uploads/2016/09/vibratorsuit.pdf
Use KitKat (19) as target sdk since robolectric 3.1.2/sqlite4java
does not understand "WITHOUT ROWID" tables.
Also, add constants for user's gender and document some things.
- properly intert apps reported from pebble into the corresponding tab
- disable tracking of installed apps
- disable drag and drop for apps and watchfaces
- ...
Basically moved code out of ControlCenter to a separate class. Also provides
change events when the device list has changed, or changes to the device
state have occurred.
- moved out of GBApplication to class Logging
- the main thing is: when start()ing the FileAppender again, it *must*
- be configured to be non-lazy, otherwise it won't open the stream ever again.
This avoids a lot of problems because java
- does not know unsigned values
- jvm and dalvic do not internally support byte and short
- sqlite does not know them either
This commit fixes the following compilation error:
```
:app:compileDebugJavaWithJavac
/home/bob/dev/Gadgetbridge/app/src/main/java/nodomain/freeyourgadget/gadgetbridge/util/LimitedQueue.java:26:
error: incomparable types: Object and int
if (pair.first == id) {
^
Note: Some input files use or override a deprecated API.
Note: Recompile with -Xlint:deprecation for details.
Note: Some input files use unchecked or unsafe operations.
Note: Recompile with -Xlint:unchecked for details.
1 error
:app:compileDebugJavaWithJavac FAILED
FAILURE: Build failed with an exception.
```
- put random id/phone number pair into limited lookup list (last 16 sms messages) when sms arrives
- lookup the phone number when replying from the a device
THIS STILL DOES NOT DO ANYTHING USEFUL
- created and provided by DeviceHelper
- passed from UI to service
- without UI, service uses DeviceHelper directly
=> Cleaner and less duplicated code
The primary external dir is often a user-partition on the internal
storage medium. This one is safe in multi-user environments.
The "removable storage" (sdcard) on the other hand can be read by
everyone. If the former is not available or not writable, use the
latter.
closes#153
The notfification APIs now use NotificationSpec as their only parameter, which
contains all information (required and optional ones).
We no longer have separate methods and actions for SMS/EMAIL/GENERIC anymore.
The type of notification is important now, not how we received them technically.
Previously, the DeviceCommunicationService was invoked directly,
via
Intent intent = new Intent(foo, bar);
intent.setExtra(EXTRA_BAZ, baz);
startService(...);
and this was scattered throughout GadgetBridge.
Now there is a "frontend" available, so that you can call
the service more easily, like
GBApplication.deviceService().connect();
For a start, this client interface (DeviceService) actually
implements the same interface (EventHandler) as the receiving side
(DeviceSupport). This may change in the future.
This will also make testing much easier, because we can use
this client interface to invoke the test service as well.
- only show the bigtext notification if the device has set extended battery info
- custom icon for the low battery notification (with license information)
- show device name in the notification
- set the notification to high priority
- the battery threshold is now set in GBDevice
- model package contains mostly shared interfaces (UI+service), not named GB*
- impl package contains implementations of those interfaces, named GB*
the impl classes should not be used by the service (not completely done)
- the service classes should mostly use classes inside the service and deviceevents
packages (tbd)
Every device now has two packages:
- devices/[device name] for UI related functionality
- service[device name] for lowlevel communication