This affects available features (eg. Alexa). Defaults to the previous
value of "unknown" for now, and no UI. Alexa requires a region where it
is available, such as Germany ("de").
Since the PR #2961 aswell as #2976, i pushed the changes to this pr.
Original text:
With this PR, the gadgetbridge app sends the current locationd data, obtained from the gps or network provider, to a connected banglejs device as an "gps" event.
The bangle device can use this data instead of the internal gps data. Therefor saving battery energy, since the gps chip is one of the biggest energy consumers.
Furthermore it enables the banglejs device to use the location data, based on the network with which the phone is currently connected. This would be usefull if there is no gps signal.
Updates:
I added a network provider so that it is possible to use the network location. I also overload the start method of GBLocationManager so that it is now possible to select which provider should be used to get the data (currently GPS or Network) and to set a interval to determine how often the update should be run.
For the banglejs device i added a switch to enable the sending of gps data. I also added a setting, to set the interval on how often the gps data is being updated. This allows to throttle the updates of the gps data and therefore saving energy of the smartphone batterie.
To further save energy, the app now requestes the current status of the gps from the banglejs and only sends data, if the gps of the banglejs is turned on.
In the PR #2976 I also moved the settings to the device settings of the banglejs and i moved the logic to the onLocationChanged method of the GBLocationManager.
Co-authored-by: Lukas <lukas.edi@gmx.net>
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2992
Co-authored-by: LukasEdl <lukasedl@noreply.codeberg.org>
Co-committed-by: LukasEdl <lukasedl@noreply.codeberg.org>
Mostly copied from the Buds Pro as those earbuds have a similar feature set and mostly the same protocol.
Co-authored-by: narektor <narektor@noreply.codeberg.org>
Co-committed-by: narektor <narektor@noreply.codeberg.org>
- open app preferences screen from device card menu
- open auth preferences screen from DiscoveryActivity
- add explanation about Auth key, make it open wiki link, fix#2240
- add New protocol checkbox and explanation when first pairing Miband 6
this PR aims to add device for multiple connected devices at once.
A lot of stuff already works, some things need to be done:
- [x] change DeviceCommunicationService to hold multiple devices and supports
- [x] implement connect / disconnect logic
- [x] widgets, not really suited for multiple devices, so far
- [x] change the notification to show multiple devices
- [ ] change GBDeviceService#onFindDevice and similar API functions to target individual devices, not all connected.
- [x] move auto-reconnect setting to device settings
- [x] fix music event crash
- [x] work out behaviour when pressing "connect" from notification
- [ ] handle service crashes
- [ ] suit coordinator methods for multiple devices of same kind
- [x] change ACL_CONNECTED receiver to connect to devices that are not currently registered in DeviceCommunicationService
- [ ] adjust after-boot auto-connection logic
- [ ] fix hanging device support. Device says disconnected, GB says connected
- [x] firmware updater doesn't work
My attempt to make onFindDevice work was to change the arguments to ```EventHandler#onFindDevice(GBDevice device, boolean start)```.
The Problem is that this forces the device-specific implementations to also accept GBDevice as an argument.
Co-authored-by: Daniel Dakhno <dakhnod@gmail.com>
Co-authored-by: Andreas Shimokawa <shimokawa@fsfe.org>
Co-authored-by: dakhnod <dakhnod@gmail.com>
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2526
Co-authored-by: dakhnod <dakhnod@noreply.codeberg.org>
Co-committed-by: dakhnod <dakhnod@noreply.codeberg.org>
This PR adds the ability to change activity recognition settings on the watch.
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2539
Co-authored-by: dakhnod <dakhnod@noreply.codeberg.org>
Co-committed-by: dakhnod <dakhnod@noreply.codeberg.org>
This PR adds not only the device Bose QC35,
it also adds the following autop-reconnect feature:
When the headphones are turned on, the initiate a connection with the phone.
With this change, GB is notified about said change, and tries to establish a connection to the newly connected device, if the appropriate device setting is set.
The QC35 headpones always have NC turned on after boot, thus the main feature of this implementation is to turn off NC as soon as the headphones are turned on and connected to the phone.
I am open for discussion regarding the implementation, but this seems like a good first proposal.
What is missing is the ability to connect to multiple devices, since in many cases headphones can be connected to the watch simultaniously to a smartwatch or other gadget.
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2520
Co-authored-by: dakhnod <dakhnod@noreply.codeberg.org>
Co-committed-by: dakhnod <dakhnod@noreply.codeberg.org>
- this tries to address a common request to display user data up front
- i would make this via a fragment, but RecyclerView doesn't like Fragments
- (fragments would make it much easier to also add a charts like view,
like we use on the Activity list tab)
- i added configuration that allows to disable it partially or fully
Co-authored-by: Petr Vaněk <vanous@noreply.codeberg.org>
Co-committed-by: Petr Vaněk <vanous@noreply.codeberg.org>
Nothing Ear (1) are wireless earbuds that support active noise
suppression, transparency mode and several gestures.
This initial commit adds support for:
- reading battery level
- setting audio mode
- setting in-ear auto detection
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2403
Co-authored-by: daniele <daniele@noreply.codeberg.org>
Co-committed-by: daniele <daniele@noreply.codeberg.org>
I left the non-preference related dslv code untouched and took it from here
https://github.com/sbolotovms/drag-sort-listview
(This is one of many forks, which had migrated android to androidx)
The base for the code in DragSortListPreferenceFragment.java and
DragSortListPreference.java comes from:
https://github.com/kd7uiy/drag-sort-listview
I heavily modiefied it moved it to androidx
