Battery percentages were shown in gadgetbridge, but not stored, so the chart didn't work.
Call AbstractDeviceSupport.handleGBDeviceEvent() instead of rolling our own battery update,
and that does call createStoreTask()
This really seems to be the same device, but it does have a different firmware
and a different bluetooth name.
Do this to prevent cross flashing - which might actually be okay but we do not know.
This PR adds the ability to change activity recognition settings on the watch.
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2539
Co-authored-by: dakhnod <dakhnod@noreply.codeberg.org>
Co-committed-by: dakhnod <dakhnod@noreply.codeberg.org>
New Huami Amazfit GTS 2 Mini activity for Outdoor Trekking/Hiking.
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2528
Co-authored-by: Sebastian Krey <skrey@noreply.codeberg.org>
Co-committed-by: Sebastian Krey <skrey@noreply.codeberg.org>
Adds Support for BLDC controller VESC connected to a BLE serial device like an HM10.
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2491
Co-authored-by: dakhnod <dakhnod@noreply.codeberg.org>
Co-committed-by: dakhnod <dakhnod@noreply.codeberg.org>
This PR adds not only the device Bose QC35,
it also adds the following autop-reconnect feature:
When the headphones are turned on, the initiate a connection with the phone.
With this change, GB is notified about said change, and tries to establish a connection to the newly connected device, if the appropriate device setting is set.
The QC35 headpones always have NC turned on after boot, thus the main feature of this implementation is to turn off NC as soon as the headphones are turned on and connected to the phone.
I am open for discussion regarding the implementation, but this seems like a good first proposal.
What is missing is the ability to connect to multiple devices, since in many cases headphones can be connected to the watch simultaniously to a smartwatch or other gadget.
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2520
Co-authored-by: dakhnod <dakhnod@noreply.codeberg.org>
Co-committed-by: dakhnod <dakhnod@noreply.codeberg.org>
This is used for setting world clock and setting canned messages for call rejection.
This PR implements setting the canned messages, but unfortunately the feature is somehow not "unlocked"
added sync "steps" from PineTime/InfiniTime to Gadgetbridge.
notes:
* Steps sync works only since InfiniTime 1.7
* InfiniTime advertise "steps" info when the PineTime screen is ON (and a bit after that). hence:
* you should unlock the PineTime screen before end of the day to not loose your latest progress (since the last unlock) at the end of the day;
* when the PineTime screen is ON and you are moving, PineTime will send "steps" count every about 2-10 seconds, and Gadgetbridge may start to treat this data as an Activity (and also displaying it in Activity charts). that data and charts will not be accurate: you should wait for ["Health/Fitness data storage and expose to companion app](https://github.com/InfiniTimeOrg/InfiniTime/projects/4)" project to be implemented on the PineTime side. and meanwhile, in Gadgetbridge open "Device specific settings" and change/uncheck option in "Charts tabs" and "Activity info on device card" to leave only Steps data.
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2486
Co-authored-by: ITCactus <itcactus@noreply.codeberg.org>
Co-committed-by: ITCactus <itcactus@noreply.codeberg.org>
This PR aims to add the on-device connection confirmation for the Fossil HR.
This seems mandatory, since, at least on my watch, without said confirmation certain files like the configuration cannot be accesses, e.g. the time on the watch cannot be set etc.
The mystery yet to be solved is how to get the watch to not ask for a confirmation on every new connection or reconnection attempt, since that can get very annoying.
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2451
Co-authored-by: dakhnod <dakhnod@noreply.codeberg.org>
Co-committed-by: dakhnod <dakhnod@noreply.codeberg.org>
- use correct DeviceCoordinator method supportsActivityTracking()
- remove placeholders from xml
- clarify comments in DeviceCoordinator
- clean up some previously added unused imports
- this tries to address a common request to display user data up front
- i would make this via a fragment, but RecyclerView doesn't like Fragments
- (fragments would make it much easier to also add a charts like view,
like we use on the Activity list tab)
- i added configuration that allows to disable it partially or fully
Co-authored-by: Petr Vaněk <vanous@noreply.codeberg.org>
Co-committed-by: Petr Vaněk <vanous@noreply.codeberg.org>
This affects InfiniTime and Huami
For InfiniTime it probably resulted in the wrong time being displayed
For Huami is resulted to request the wrong data from the band/watch
We used timezone.getDSTOffset() which always returns the DST offset (also in non
DST time)
We need to pass the time being observed to calendar.getOffset() to get the real
offset including DST at that specfic time which then either includes DST offset or not.
This adds a button which rotates the selected watchface by 90 degrees counter-clockwise to the hybridqr.
I did not manage to fix the autoorientation.
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2408
Co-authored-by: HelloCodeberg <hellocodeberg@noreply.codeberg.org>
Co-committed-by: HelloCodeberg <hellocodeberg@noreply.codeberg.org>
- rename some methods to better indicate their functions.
- make the notification filter to be allow or deny list,
solves #2256 and #336
- make app word filter to behave based on allow/deny settings.
- make Pebble notifications to honor the allow/deny settings.
- add generic "debug function" to Debug activity.
- add Message privacy mode settings, solves #2279
- add support for ANC-light mode
- handle multiple GBDeviceEvents
- add fake fw and hw versions to make DBHelper happy
- fix battery charge detection logic
- extract some strings to resources
