3100 Commits

Author	SHA1	Message	Date
cpfeiffer	52f3ca5253	Always name things positively. Negating things is bad for comprehension :-)	2015-10-19 23:36:10 +02:00
cpfeiffer	5a3990b9d2	Guard logging with LOG.isDebugEnabled()	2015-10-19 20:56:56 +02:00
Carsten Pfeiffer	4096e50681	Merge pull request #146 from sarg/master ... Fix DeviceInfo checksum function.	2015-10-19 20:56:49 +02:00
Daniele Gobbetti	cee03debbb	- add code to send the confirmation of the activity data transfer after a timeout. ... ==> This is currently commented out because it was done to solve #141 but while doing this #143 popped out. - send a stop_sync message to the band if the data doesn't fit the buffer. This way the data remains on the band.	2015-10-19 16:17:03 +02:00
Daniele Gobbetti	6460b391d9	Be dump the content of the notification to the debug log	2015-10-19 15:16:21 +02:00
Sergey Trofimov	94cbf2f301	Fix DeviceInfo checksum function.	2015-10-19 15:02:56 +03:00
cpfeiffer	4e0fed8857	Improvements to how and when alarms are sent to the device ... They are now sent whenever the Alarms activity is finished. Display "All alarms disabled" when no alarm is enabled. Unrelated: pass exceptions to GB.toast() where applicable.	2015-10-18 23:52:59 +02:00
cpfeiffer	86d17c7792	Pass the exception to GB.toast()	2015-10-18 23:43:27 +02:00
cpfeiffer	ef15bf8ce8	Prevent firmware update for Mi Band 1A for now #136	2015-10-18 22:57:04 +02:00
cpfeiffer	dcd776e09a	Attempt to fix never finishing activity data fetching #142 ... (by disabling unrelated notifications)	2015-10-18 22:27:52 +02:00
cpfeiffer	7a44ea9596	Small comment	2015-10-18 21:33:07 +02:00
Sergey Trofimov	d57c6166b9	Fix pairing with MI1A	2015-10-18 21:54:22 +03:00
Sergey Trofimov	7591d4a8af	Fix typo	2015-10-18 18:29:41 +03:00
Sergey Trofimov	a1fd31c260	Show toast when no valid DeviceSupport found for pairing.	2015-10-18 09:34:51 +03:00
Sergey Trofimov	1c1f8e8535	Make DeviceSupportFactory recognize device names starting with MI	2015-10-18 09:20:18 +03:00
cpfeiffer	b43e96318a	Also support pulldown to sync in ControlCenter #138 ... Should factor out some common code between ChartsActivity and ControlCenter, though.	2015-10-18 01:39:25 +02:00
cpfeiffer	1e56e540fa	Remove hardcoded equals("MI") in favor of DeviceCoordintator #136	2015-10-18 01:01:13 +02:00
cpfeiffer	45fc2c181c	Add pulldown to sync and tabs in the charts activity #138	2015-10-17 17:10:14 +02:00
Andreas Shimokawa	a9186791dc	register/unregister receivers at runtime instead of enabling/disabling them via packagemanger	2015-10-16 00:23:16 +09:00
cpfeiffer	4533ae22ee	Log otherwise uncaught exceptions (#134)	2015-10-07 23:32:58 +02:00
Andreas Shimokawa	262271dbd0	Pebble: calculate CRC for language files (.pbl) since they do not have a manifest ... It should fix installation of all .pbl files (tested with Spanish, German, French and the inofficial Japanese language pack) This also marks the return of the infamous STM32CRC, this time with hopefully fixed tail code.	2015-10-07 22:29:30 +09:00
Andreas Shimokawa	cd7acf6572	Pebble: Do not reboot after language file installation (does not seem to be necessary) ... NOTE: This still does not work since crc calculation is missing	2015-10-07 00:44:29 +09:00
Andreas Shimokawa	5860c4f4f9	Pebble: WIP support for flashing language files (.pbl) ... NOTES: - YOU SHOULD NOT TRY THIS YET ;) - This was only tested with the unoffical japansese language pack - Problably needs proper crc calculation (I just hardcoded the one for the japanese language pack)	2015-10-06 23:56:01 +09:00
Andreas Shimokawa	d21b5e68b5	Pebble: Cleanup AppMessage handlers	2015-10-04 22:53:11 +09:00
Andreas Shimokawa	a4a59f5df4	fix hexdump() when using an offset with -1 as length (= full length)	2015-10-04 22:42:21 +09:00
cpfeiffer	0d27245dd1	Some more translations + reoder live activity layout	2015-10-04 00:17:24 +02:00
cpfeiffer	9db7d13a94	Log any exceptions during ble callbacks, if any #91	2015-10-04 00:00:53 +02:00
cpfeiffer	5b8bf468f5	Remove some superfluous checks	2015-10-03 23:52:33 +02:00
cpfeiffer	321c0ff125	Log when we get bogus timestamps #91	2015-10-03 23:42:22 +02:00
cpfeiffer	38c3a41279	Improve logging setup, should hopefully fix #107	2015-10-03 23:26:36 +02:00
cpfeiffer	2231dcbce3	Log GB's version	2015-10-03 22:30:11 +02:00
cpfeiffer	93523d7831	Fix crash introduced by translation before onCreate()	2015-10-03 10:08:48 +02:00
cpfeiffer	d6f9eac711	Revert to previous BLE connection method: ... - first, connectGatt(true) to support automatic (re-) connection - second, bluetoothGatt.connect() to connect immediately	2015-10-03 00:21:31 +02:00
cpfeiffer	586d959055	Merge branch 'master' into live-activity-data	2015-10-02 23:49:03 +02:00
cpfeiffer	baa2d0b27a	Displaying live activity data works well enough	2015-10-02 23:38:07 +02:00
cpfeiffer	c9e91bd708	Some work in enabling the history of step count ... Doesn't work yet.	2015-10-02 00:07:19 +02:00
cpfeiffer	2149b18ae3	Yay, animating live activity data works. ... Nice hack: MPAndroidChart supports animating values, but only animating a new entry, going from zero to its actual value. We want to animate a single entry changing its value. Since it's just a single entry, we can let a custom animator do this (without knowledge of any other entries).	2015-10-01 22:36:33 +02:00
Daniele Gobbetti	d14ccf1c5c	Get device name from the BLE Standard Characteristic. ... Always log read and notify characteristics, even if unhandled. Changed Log statements for write action to make them clearer.	2015-09-28 16:47:43 +02:00
Daniele Gobbetti	f8edf5c525	Move BLE standard characteristic and services debug names to the right class.	2015-09-28 16:28:08 +02:00
Daniele Gobbetti	18f952250a	First working code for vibrations on firmware version 1.0.10.14	2015-09-28 12:53:42 +02:00
Daniele Gobbetti	deea721090	Add verbatim Official BLE Services, Descriptors and Characteristics. ... Move the already defined constants to these new classes.	2015-09-28 12:51:01 +02:00
cpfeiffer	4250a002b4	Merge branch 'master' into live-activity-data	2015-09-27 00:16:04 +02:00
cpfeiffer	0395977fde	Some work for properly animating our single (value-changing) entry	2015-09-27 00:10:33 +02:00
Andreas Shimokawa	c8a08510ce	always initialize checkboxes AppBlacklistActivity, not only when App is in blacklist ... Closes #129	2015-09-25 21:33:35 +02:00
Daniele Gobbetti	720eaa111d	Add generic service for immediate alert and prepare the code to support characteristics from different services	2015-09-25 17:45:06 +02:00
Andreas Shimokawa	e3533a2b18	Pebble: Allow muting (blacklisting) Apps from within generic notifications on the watch ... Closes #113	2015-09-25 00:53:40 +02:00
Andreas Shimokawa	94ad7f2eb9	set type to SMS when receiving an SMS via generic notification listener	2015-09-24 17:26:40 +02:00
Andreas Shimokawa	1d41f2f8e4	Refactoring ... The notfification APIs now use NotificationSpec as their only parameter, which contains all information (required and optional ones). We no longer have separate methods and actions for SMS/EMAIL/GENERIC anymore. The type of notification is important now, not how we received them technically.	2015-09-24 14:45:21 +02:00
Daniele Gobbetti	e1ea8270ca	Add a progress notification for the activity data transfer.	2015-09-24 14:03:01 +02:00
Daniele Gobbetti	5578691321	Fix progress bar	2015-09-24 14:02:33 +02:00
cpfeiffer	8ba307657a	Migrate from MPAndroidChart 2.1.0 to 2.1.4 ... This actually makes our CustomLegendRenderer and CustomBarChart unnecessary.	2015-09-24 00:04:21 +02:00
Andreas Shimokawa	ab78d167d9	update CHANGELOG.md	2015-09-23 23:53:16 +02:00
Andreas Shimokawa	3bb673d33a	Pebble Time Round support ("chalk" platform)	2015-09-23 23:20:49 +02:00
cpfeiffer	d9b4bbe550	Move activity data and progress manipulation into dedicated methods ... I did this in trying to understand the code better and to easier allow for error handling/transaction rollback to be added.	2015-09-23 23:16:42 +02:00
cpfeiffer	3852fcd756	Reuse MiBandDateConverter	2015-09-23 23:16:42 +02:00
Andreas Shimokawa	77b4bb9cf1	Mi Band: Do not whitelist 1.0.10.14 anymore, vibration seems to be broken with Gadgetbridge	2015-09-20 22:13:25 +02:00
Andreas Shimokawa	98b1abedac	Allow phone call notifications (also in call display) to be disabled in preferences ... This will allow Pebble Dialer to handle these #106	2015-09-20 22:04:53 +02:00
Andreas Shimokawa	f6ef72e9fb	Pebble: fix some hardware revision strings to match strings in firmware json file ... This should enable firmware upgrade on Pebble Time and might fix pbw installation on Pebble Time Steel	2015-09-20 18:27:41 +02:00
Andreas Shimokawa	60b24e004a	Pebble: Fix bug for Pebble Intent Notifications not arriving on FW 2.x	2015-09-19 21:35:02 +02:00
Andreas Shimokawa	0c4dbf75e0	Pebble: fix for PebbleKit AppMessages containing non-latin characters	2015-09-19 15:32:09 +02:00
Andreas Shimokawa	e1b02e1be4	Pebble: add option for PebbleKit support (default is disabled) ... Also fix an endless loop when number of reconnects is set to 0	2015-09-19 12:49:34 +02:00
Andreas Shimokawa	e6a8a1a36c	Pebble: Better support for 8 and 16 bit integers in AppMessages	2015-09-18 00:03:34 +02:00
Andreas Shimokawa	041bd1a7f4	Treat Conversations messagess as chat messages, even if arrived via Pebble Intents (which is the default)	2015-09-17 23:08:05 +02:00
Andreas Shimokawa	a5ef952e37	Pebble: Implement WIP outbound communication with PebbleKit Android Apps ... This improves #106 Pebblebike aka Ventoo works to some extent sometimes now ;)	2015-09-17 19:21:22 +02:00
Daniele Gobbetti	55341678b3	Add firmwares from the wiki.	2015-09-17 16:56:23 +02:00
Daniele Gobbetti	b73ff49681	Use data type constant instead of hardcoded value	2015-09-17 16:56:23 +02:00
Andreas Shimokawa	58bbcb0035	Pebble: allow to configure reconnect attempts ... This should help #89	2015-09-17 15:31:12 +02:00
Andreas Shimokawa	d8c096d931	Handle SMS/MMS as generic notification if disabled ... (could serve as a workaround for #127)	2015-09-16 01:09:03 +02:00
Andreas Shimokawa	6e3c839608	Allow to select preferred music player in preferences, closes #112	2015-09-16 00:53:54 +02:00
Andreas Shimokawa	de74a033f6	Try to support controlling multiple music players ... This tries to control the last player that played a (new) song. It is very limited since we cannot get the source of an intent. Instead we try to guess from the Action. The problem is that we cannot support players that use only the action "com.android.music.XXXX" and not something own. Also try to blindly support getting spotify metadata (for testing #112)	2015-09-15 01:36:33 +02:00
Julien Pivotto	21d59b23c1	Allow QKSMS notifications to be handled as a generic notification if SMS notification mode is set to "never" ... This makes it possible to use the "Open on Phone" and individial dismiss feature with QKSMS.	2015-09-13 22:51:05 +02:00
Andreas Shimokawa	95e22a4e32	Pebble: Allow stopping apps though PebbleKit messages (also in the API)	2015-09-13 21:44:26 +02:00
Andreas Shimokawa	6fff4fb7ba	Pebble: support byte arrays for Appmessages (including PebbleKit ones)	2015-09-13 18:37:59 +02:00
Andreas Shimokawa	9a32be97cb	Pebble: work towards PebbleKit support #106 ... - Untested features have to be turned on. - We will accept data from any source. - One way, we do not send out replies. This already works with the minimalistic sports demo from the sdk	2015-09-13 18:20:15 +02:00
Andreas Shimokawa	d3dbde6917	Some refactoring: ... - Put Pebble icon ID constants in its own class - remove ICON_ and COLOR_ prefixes from constants	2015-09-13 15:21:07 +02:00
Andreas Shimokawa	04086a3b4c	Merge pull request #122 from roidelapluie/colors ... Pebble: Support Colors in notifications	2015-09-13 14:58:05 +02:00
Julien Pivotto	1027336591	Pebble: Support colors in 3.x notifications (Pebble Time) ... * Generic notifications are still red * Colors are in a separated static class Closes #120.	2015-09-13 14:54:43 +02:00
Julien Pivotto	eafb795874	Fix a small typo in gadgetbridge.model.ServiceCommand	2015-09-13 14:26:55 +02:00
Andreas Shimokawa	a73beceb44	Map a few more apps to NotificationKind	2015-09-13 13:48:21 +02:00
Andreas Shimokawa	4f80844016	noficicaion_kind -> notificationKind	2015-09-13 13:38:11 +02:00
Andreas Shimokawa	44d8294f8c	Pebble: use Hipchat icon for chat notifications on FW 3.x	2015-09-13 13:32:18 +02:00
Andreas Shimokawa	a85c04c02a	Pebble: use constant for icons where possible	2015-09-13 12:55:10 +02:00
Julien Pivotto	d50a82d495	Pebble: Set application icons for generic notifications ... Closes #116.	2015-09-13 00:39:53 +02:00
Andreas Shimokawa	637539861d	Merge pull request #115 from roidelapluie/notifications ... Pebble: Use generic icon for generic notification instead of SMS icon on FW 3.x This also adds a lot of constants for a bunch of icon IDs	2015-09-12 23:14:58 +02:00
Julien Pivotto	986e7e0450	Improve Pebble Time notifications icons ... * Add a list of icons in the source code * Generic notification now use the correct icon instead of the SMS icon	2015-09-12 22:14:36 +02:00
Andreas Shimokawa	914d1b9625	Make notification blacklist actually working	2015-09-12 00:19:36 +02:00
Andreas Shimokawa	03b9f02b2c	Pebble: allow launching internal Golf and Sports App if untested features are enabled ... This is completely useless for now, but since it is there on every Pebble, I want to be able to launch it.	2015-09-10 23:07:42 +02:00
Andreas Shimokawa	0ad758fbca	WIP blacklist activity (currently does nothing except listing apps)	2015-09-10 13:48:54 +02:00
cpfeiffer	80d15573af	Avoid tiny window where a gatt callback of an operation could be unset	2015-09-10 00:00:52 +02:00
cpfeiffer	c23905070c	Some more logging improvelets	2015-09-09 23:39:57 +02:00
cpfeiffer	22a9ff1819	Log when no listener is registered for a characteristic change	2015-09-09 23:23:38 +02:00
cpfeiffer	e80a3cc591	Log the number of samples being flushed #91	2015-09-09 22:33:06 +02:00
cpfeiffer	e0ccb6bf84	Log the date/time that we sync to the Mi Band #91	2015-09-09 21:53:28 +02:00
cpfeiffer	d9d222ca9b	Tiny logging improvement	2015-09-09 21:15:29 +02:00
cpfeiffer	bddf6c8909	Also log the number of rows (samples) returned by the query #91	2015-09-09 20:52:04 +02:00
cpfeiffer	2dec5574cc	Log the where condition of the samples query #91	2015-09-09 20:49:17 +02:00
cpfeiffer	e34c5614d7	Bail out hard if we get negative steps from the database #91 ... We don't add them to the db for sure.	2015-09-09 20:46:50 +02:00
Andreas Shimokawa	7f331a1bb1	Pebble: play around with timeline pins	2015-09-08 14:15:46 +02:00
cpfeiffer	518b1ee6f4	Merge branch 'master' into live-activity-data	2015-09-07 21:41:02 +02:00
Daniele Gobbetti	6c28b50f52	allow the transfer of activity data without clearing MiBand's memory	2015-09-07 12:06:56 +02:00
cpfeiffer	1711a7a731	Merge branch 'master' into live-activity-data	2015-09-06 00:46:50 +02:00
cpfeiffer	fbd23c2d4c	Some layout improvements (#30)	2015-09-06 00:03:56 +02:00
cpfeiffer	bc3c0760d0	More WIP with live activity charts	2015-09-05 23:05:57 +02:00
Andreas Shimokawa	02cc8ba455	Allow K9 Mail notifications to be handled as a generic notification if K9 Mail notification mode is set to "never" ... This makes it possible to use the "Open on Phone" and individial dismiss feature with K9 Mail.	2015-09-05 21:32:46 +02:00
Andreas Shimokawa	a839f07496	Pebble: use proper icon for "Open on Phone" on Pebble Time	2015-09-05 21:00:18 +02:00
Andreas Shimokawa	1a1277fa3d	Pebble: Fix "Open on Phone" on OG Pebble (no more error display)	2015-09-05 20:40:12 +02:00
cpfeiffer	5f993c0049	Merge branch 'master' into live-activity-data	2015-09-05 00:15:49 +02:00
cpfeiffer	69b64ed4b6	More logging for time/timezone changes ... (trying to find an explanation for #91)	2015-09-05 00:14:09 +02:00
cpfeiffer	8f4e933e30	More WIP on live activity: ... - keep screen on while live activity is visible - hide the date bar (prev&forward buttons) - live activity chart is still nowhere near usable	2015-09-04 21:55:29 +02:00
cpfeiffer	9a1f4875fc	Temporary backup with live activity	2015-09-03 23:20:47 +02:00
cpfeiffer	05ee6e46c6	Display battery label in RED when battery is LOW #40	2015-09-02 23:49:48 +02:00
cpfeiffer	42420e676b	More WIP: displays live activity data	2015-09-02 23:49:06 +02:00
Andreas Shimokawa	e4a72a83ee	Ignore QKSMS generic noticfication to prevent duplicate SMS notifications ... Closes #108	2015-09-02 22:54:20 +02:00
Andreas Shimokawa	ab29736a50	Pebble: Implement "Open on Phone" function for generic notifications ... TODO: - search a better icon for the Pebble Time - send a reply to the OG Pebble to prevent the error message from popping up	2015-09-02 22:43:22 +02:00
Daniele Gobbetti	b6cbb5d6be	read initial value of live steps data when enabling notification	2015-09-02 16:36:20 +02:00
cpfeiffer	ab8982e7f2	WIP: support for live display of activity data	2015-09-02 08:02:26 +02:00
cpfeiffer	536b2bd8a0	Another translatable string	2015-09-01 23:56:14 +02:00
cpfeiffer	da5df5621e	Use MEDIUMINT for steps per day (no effect, not used, and ignored by sqlite)	2015-09-01 23:11:22 +02:00
cpfeiffer	4b4c6d1a6b	Do not accept negative step/intensity values in the db ... (Ignore and log those requests instead)	2015-09-01 22:53:47 +02:00
cpfeiffer	c5db816cd1	Pass shorts along to avoid implicit signed conversion.	2015-09-01 22:53:20 +02:00
cpfeiffer	c49c795b1d	Actually remove that implicit "current date" handling ... We now manage days explicitly in the UI.	2015-09-01 22:43:31 +02:00
cpfeiffer	d791054e42	Fix getLast24Hours() -- take end time into account	2015-09-01 22:37:20 +02:00
cpfeiffer	a6d18e599b	Tiny simplification and extract string	2015-09-01 22:34:04 +02:00
cpfeiffer	917801f223	Use the correct date for displaying steps #91	2015-09-01 22:13:30 +02:00
Andreas Shimokawa	fd789c445e	Allow dismissal of individual (generic) notification ... Implemented for Pebble and Pebble Time #103	2015-09-01 22:00:11 +02:00
cpfeiffer	5c2bd1e8df	Avoid code duplication by reusing logMessageContent()	2015-09-01 21:26:51 +02:00
Andreas Shimokawa	46171e4ab8	Some preparations for interactive notifications	2015-08-31 22:27:25 +02:00
Andreas Shimokawa	2da717ea4c	set visibility of service notification to public again	2015-08-31 21:29:00 +02:00
Daniele Gobbetti	ee3ca5998e	Fail early when opening a pebble file. ... Fixes #102 We could also use a whitelist approach instead, but we can't be sure that the user installs a file with .fw extension, hence i preferred to only avoid loading files which are known to be of the wrong type.	2015-08-31 17:41:09 +02:00
Daniele Gobbetti	9360b81ef3	Don't add new limitlines, clean the existing one before (it could be optimized further by reusing the existing one, probably)	2015-08-31 17:41:09 +02:00
Daniele Gobbetti	249ff5bf94	Let the user change date also on the Week steps chart	2015-08-31 17:41:09 +02:00
Andreas Shimokawa	face7cceea	probable close #104	2015-08-31 17:31:32 +02:00
Andreas Shimokawa	95b65265b4	remove eventClass field from GBDeviceEvent, use instanceof instead	2015-08-31 17:25:58 +02:00
cpfeiffer	50960277dd	Localized some firmware update texts and added some toasts on finish	2015-08-30 21:56:45 +02:00
cpfeiffer	41d8bcf634	Make firmware and app installation a bit more user friendly #30	2015-08-30 00:21:51 +02:00
cpfeiffer	530116976c	Only call super.onCharacteristicChanged() when not handling it here	2015-08-29 20:48:33 +02:00
cpfeiffer	25ddc20f89	Fix testcases with sdk 23: don't call Notificaton API during local tests	2015-08-29 20:39:34 +02:00
Andreas Shimokawa	13300fcb5d	finally fix build with SDK 23	2015-08-29 11:31:48 +02:00
Daniele Gobbetti	26792717d4	Add showing when the device wasn't worn by the user	2015-08-28 14:58:30 +02:00
Daniele Gobbetti	fb5ebeacb6	Light colors for the graphs. ... Closes #99	2015-08-28 14:58:30 +02:00
cpfeiffer	086bb8aa4a	Also parcel the battery level threshold	2015-08-28 13:53:16 +02:00
cpfeiffer	ff989390f9	Fix the remaining TODO #101	2015-08-28 13:49:36 +02:00
Daniele Gobbetti	2f1aa45445	Merge remote-tracking branch 'origin/master' into low_battery_notification	2015-08-28 10:40:46 +02:00
Daniele Gobbetti	cbea0feb9e	Centralize the calendar conversion to/from byte array take 2. ... Move to an independent class.	2015-08-28 10:40:25 +02:00
Andreas Shimokawa	2ca8e149ee	Pebble: support "dismiss all" action also on Pebble Time/FW 3.x notifications ... This is done through a workaround, now we just label it as a generic action and reply properly to the invocation from the Pebble. Fixes #86	2015-08-27 18:01:19 +02:00
Andreas Shimokawa	44c7f99c58	GBDeviceProtocol::decodeResponse() now returns an array GBDeviceEvents ... This allowed to remove some ugly hacks from pebble code, when encoding a response in a GBDeviceEventSendBytes and at the same time trying to notify generic code via another GBDeviceEnvent.	2015-08-27 15:02:29 +02:00
Daniele Gobbetti	3a6e433fb3	Merge remote-tracking branch 'origin/master' into low_battery_notification	2015-08-27 13:12:29 +02:00
Daniele Gobbetti	677e0808bf	Centralize the calendar conversion to/from byte array.	2015-08-27 13:12:09 +02:00
Daniele Gobbetti	7923e153e6	Moved the enum to standalone in the model package.	2015-08-27 11:50:31 +02:00
Andreas Shimokawa	027e6fe8c3	Pebble: add more Datalogging endpoint debug output	2015-08-26 23:17:32 +02:00
Daniele Gobbetti	3356a4b066	Merge remote-tracking branch 'origin/master' into low_battery_notification ... Conflicts: app/src/main/res/values/strings.xml	2015-08-26 15:46:33 +02:00
cpfeiffer	e1c02cc373	Prevent charts date in the future, documentation and cleanup	2015-08-25 22:45:07 +02:00
cpfeiffer	b4e34db1d2	Faster animation	2015-08-25 01:03:58 +02:00
cpfeiffer	0bb3188bc8	Start and end dates now work properly across charts ... They are now managed by the Activity, because the fragments may be created and destroyed at any time and hece cannot synchronize their date-state all the time. Open issue: moving across the borders (first day with data, current day)	2015-08-25 00:54:16 +02:00
cpfeiffer	e47ebb8f09	Improvements to charts ... - backward and forward buttons work better - buttons only refresh the current fragment now - activity shows fragment-specific titles	2015-08-25 00:33:37 +02:00
Daniele Gobbetti	6ebc727f97	Merge remote-tracking branch 'origin/master' into low_battery_notification ... Conflicts: app/src/main/java/nodomain/freeyourgadget/gadgetbridge/util/GB.java	2015-08-24 17:48:17 +02:00
cpfeiffer	070876db06	Allow disconnecting when device is connecting ... Also require "initialized" state for "find device"	2015-08-24 13:19:17 +02:00
cpfeiffer	ba670bbb50	More testing work: with a new test for finding the device	2015-08-23 00:54:51 +02:00
cpfeiffer	6f7de96461	Fix find device (wrong EXTRA_ constant used)	2015-08-22 12:38:35 +02:00
cpfeiffer	77cad5c47f	Initial support for testing the DeviceCommunicationService ... Lots of support classes to enable local testing, without a device or an emulator.	2015-08-22 01:09:56 +02:00
Andreas Shimokawa	cedd95186f	Pebble: revert changes commited accidentially	2015-08-22 00:29:52 +02:00
Andreas Shimokawa	1150ad2b8d	Pebble: Support taking Pebble Time screenshots. Closes #97.	2015-08-22 00:14:14 +02:00
Daniele Gobbetti	dcc988139f	Merge remote-tracking branch 'origin/master' into low_battery_notification	2015-08-21 17:34:11 +02:00
Andreas Shimokawa	12337836bc	bump version, update CHANGELOG.md	2015-08-21 16:06:23 +02:00
Daniele Gobbetti	df417e5c6c	Fix bug regarding setting wear location. ... Closes #95	2015-08-21 15:23:48 +02:00
Andreas Shimokawa	6e80978998	Pebble: Add generic method for Blobdb endpoint for deduplicating code.	2015-08-21 14:29:12 +02:00
Andreas Shimokawa	2b0acd649b	Pebble: close TCP socket when disconnecting from emulator. Prevents hang.	2015-08-21 13:19:46 +02:00
Daniele Gobbetti	eb39ce9367	Further improvements: ... - append a string on the control center when the device is charging - battery status string is no more, welcome battery state enum - the notification will not be shown when the device is charging, even if the level is below threshold	2015-08-21 08:41:57 +02:00
cpfeiffer	a1cb246e27	Add and use a "client interface" for the actions of the service ... Previously, the DeviceCommunicationService was invoked directly, via Intent intent = new Intent(foo, bar); intent.setExtra(EXTRA_BAZ, baz); startService(...); and this was scattered throughout GadgetBridge. Now there is a "frontend" available, so that you can call the service more easily, like GBApplication.deviceService().connect(); For a start, this client interface (DeviceService) actually implements the same interface (EventHandler) as the receiving side (DeviceSupport). This may change in the future. This will also make testing much easier, because we can use this client interface to invoke the test service as well.	2015-08-21 01:03:57 +02:00
Andreas Shimokawa	faaa04b670	App Installation: various improvements ... - make FwAppInstallerActivity wait for a completely initialized device - check basalt/aplite compatibility with pbw to be installed and report intead of crashing - fix crash when trying to install pbw with all app slots full	2015-08-20 18:55:22 +02:00
Daniele Gobbetti	0d8adeb7f9	Some refinements: ... - only show the bigtext notification if the device has set extended battery info - custom icon for the low battery notification (with license information) - show device name in the notification - set the notification to high priority - the battery threshold is now set in GBDevice	2015-08-19 17:36:53 +02:00
Daniele Gobbetti	57a85e63b0	Merge remote-tracking branch 'origin/master' into low_battery_notification	2015-08-19 17:30:33 +02:00
Andreas Shimokawa	d2173d37ce	forgot to commit this also	2015-08-19 01:46:18 +02:00
Andreas Shimokawa	e8e631fb49	Pebble: encode flags in metadata, this could not work on real devices	2015-08-19 01:42:13 +02:00
cpfeiffer	5a4f8fb56f	Last commit accidentally called the wrong get*Samples method	2015-08-19 01:06:46 +02:00
Andreas Shimokawa	a7796ecbc6	Pebble: Emulator support ... NOTE: - supports aplite and basalt emulator - needs recompilation of Gadgetbridge with INTERNET permission TODO: - fix disconnect issues - emulator special packet support - string localization - ...	2015-08-19 00:06:15 +02:00
Daniele Gobbetti	c3e395818f	Adding support for battery events using GBDeviceEvent. ... - show notification on low battery (closes #40) - Miband specific: add date of last charge and number of charges	2015-08-18 17:37:51 +02:00
cpfeiffer	121baa19ec	Move AbstractSerialDeviceSupport et al from bt package into serial package	2015-08-18 01:26:15 +02:00
cpfeiffer	99293d4ee5	Also extracted firmware update to separate operation	2015-08-18 00:52:02 +02:00
cpfeiffer	dbb92b55bc	Make the Operations classes BLE-generic	2015-08-18 00:31:40 +02:00
Andreas Shimokawa	c0323339e8	Pebble: set UTC time and offset on FW 3.x	2015-08-18 00:13:55 +02:00
cpfeiffer	33b598ce5c	First part of extracting parts out of MiBandSupport ... Extract Activity Data fetching into distinct 'operation' class. Fix a few small things wrt transaction-local GattCallbacks along the way.	2015-08-18 00:11:53 +02:00
cpfeiffer	585a888ecb	Improved javadoc	2015-08-18 00:11:51 +02:00
Andreas Shimokawa	0c872a920e	Pebble: always set token to -1 before waiting for a new one ... This could fix potential problems with app installation	2015-08-17 22:50:46 +02:00
cpfeiffer	e6a0c35f73	Extract checksum implementations into separate class CheckSums	2015-08-17 22:43:42 +02:00
cpfeiffer	9dc945a406	Don't throttle events for Pebble ... And actually do busy-filtering for Mi and Pebble	2015-08-17 21:30:37 +02:00
Andreas Shimokawa	6fede31bdf	Pebble: make watchapp installation available on FW 3.x without the need for setting an option	2015-08-17 18:07:47 +02:00
cpfeiffer	9dd2f039f2	Rename AbstractBTDeviceSupport to AbstractSerialDeviceSupport ... That way it also fits devices connected via TCP/IP for example.	2015-08-17 16:30:12 +02:00
Andreas Shimokawa	8fee88a1ba	Pebble: use SMS/EMAIL icons for notifications on FW 3.X	2015-08-17 13:57:01 +02:00
Andreas Shimokawa	e704357728	Pebble: set HW revision to "dvt" for basalt emulator	2015-08-17 13:19:15 +02:00
Andreas Shimokawa	c8c882c3d1	Pebble: Support removing apps on FW 3.X (metadata)	2015-08-17 13:07:34 +02:00
Andreas Shimokawa	f0924716fc	Pebble: when reading app fetch uuid, do not switch to little endian too early	2015-08-17 12:55:17 +02:00
Andreas Shimokawa	0d0b3a87e1	Pebble: on FW 3.x always assume success for installation and do no wait for 2.x packets	2015-08-17 12:43:38 +02:00
cpfeiffer	bcf42f8022	Finally, the prev and next buttons do something (#79) ... Far from perfect, but a start.	2015-08-17 02:22:16 +02:00
cpfeiffer	964994972b	Fix for pebble sample provider switching without quitting gb)	2015-08-16 23:30:16 +02:00
cpfeiffer	27a9eb8a07	Only repaint chart when activity is still alive ... (fixes error message when synchronizing in the charts activity and then switching orientation)	2015-08-16 23:27:18 +02:00
cpfeiffer	0bd65e050c	Make intensity also always positive #91 ... I never experienced such values, but others apparently do...	2015-08-16 23:18:32 +02:00
Andreas Shimokawa	48f5931043	PebbleProtocol: add missing assignment	2015-08-16 13:13:53 +02:00
Andreas Shimokawa	6af0bb2754	Pebble: Do not hardcode icon id for metadata installation, properly acknowledge app fetch requests	2015-08-16 11:33:32 +02:00
Andreas Shimokawa	a4f5524f6e	Pebble: blindly implement missing parts for app installation on FW 3.x ... This is expected to fail and needs to be enable in preferences (untested features).	2015-08-16 00:32:36 +02:00
cpfeiffer	567f27b0f4	Some initial fixes found by static analysis #92	2015-08-16 00:17:16 +02:00
Andreas Shimokawa	c69bf1b0af	Pebble: always use 2.x notification on FW 2.x except for K9 ... FW 2.x notifications enables the "dismiss all" action, but for K9 we would loose the mail icon. So K9 still needs the force option.	2015-08-15 22:38:10 +02:00
cpfeiffer	a66a3a15c2	Fix remaining byte parameter in the API for steps. ... Maybe this was the reason for #91 (negative steps) This could happen making at least 3 steps per second.	2015-08-15 00:23:13 +02:00
cpfeiffer	ecc483f027	Remove now unused class	2015-08-14 23:50:21 +02:00
cpfeiffer	d0229847e7	onFirmwareVersionReq() is no more ... - version information is now provided implicitly by device initialization - ACTION_REQUEST_VERSIONINFO is now ACTION_REQUEST_DEVICEINFO and it will return the current device state of the service without asking any DeviceSupport instance. - ACTION_CONNECT now implicitly answers with a device update intent if it IS already connected.	2015-08-14 23:37:47 +02:00
Andreas Shimokawa	f659e34efc	Pebble: do not use platform dir for pbz(firmware) files, even basalt has its files in / for fw files	2015-08-14 17:32:06 +02:00
Andreas Shimokawa	f5fbb08696	Pebble: remove unneccessary device update intent (this is done in generic code)	2015-08-14 13:46:37 +02:00
Andreas Shimokawa	e28d6fa7cb	Pebble: try to install app metadata on FW 3.x (untested)	2015-08-14 12:51:30 +02:00
cpfeiffer	2e3de0cd0f	Always send out the current state of GBDevice when asking for version ... In a second step, request the version from the device (and send updated values then) RequestVersionInfo is either a misnomer or misused, depending on your view. It is actually used by activities to get the current state of thde device. We now provide this as quickly as possible, with the drawback of sometimes sending results twice.	2015-08-14 00:29:05 +02:00
cpfeiffer	eec7fae288	Attempting to fix some connection problems after getting disconnected	2015-08-14 00:23:01 +02:00
Andreas Shimokawa	749fbe5ecc	Pebble: fix crash with emply pbw cache	2015-08-13 10:06:32 +02:00
Andreas Shimokawa	6ed54484a6	Pebble: only fill app list in AppManager with cached apps once in onCreate() ... This is important for FW 3.x testing, since the REFRESH intent will never arrive and we want to see cached watchapps	2015-08-11 14:16:08 +02:00
Andreas Shimokawa	e43fed2e7e	Pebble: various preparations for FW 3.x support ... - Implement encodeAppStart() for FW 3.x - List cached PBWs in AppManager (currently only UUID)	2015-08-11 13:55:35 +02:00
Andreas Shimokawa	13260416f3	Pebble: decode app fetch requests for debugging purposes	2015-08-11 13:21:29 +02:00
Andreas Shimokawa	151f5b8e12	Pebble: Choose binaries from basalt/ inside .pbw files for Pebble Time ... PBW installation is still unsupported on FW 3.x, these are just preparations	2015-08-11 12:47:23 +02:00
Andreas Shimokawa	5a8c9a9180	Pebble: cache installed pbw files on sdcard if force untested option is set ... This will be needed for FW 3.x on demand installations.	2015-08-11 12:04:45 +02:00
Andreas Shimokawa	0be251e83d	Pebble: if untested features option is enabled use Gadgetbridge sample provider insted of Morpheuz	2015-08-11 11:21:10 +02:00
Andreas Shimokawa	5884684cad	Pebble: add option to enable untested features. ... Bad things incoming ;)	2015-08-11 11:15:44 +02:00
Daniele Gobbetti	7bf45d9b9f	Merge branch 'master' of https://github.com/Freeyourgadget/Gadgetbridge	2015-08-10 11:24:51 +02:00
Daniele Gobbetti	b6d3317b2d	First step for GBDeviceEvents support: ... - change fw handling to GBDeviceEvent - misuse the hw version for showing the MiBand device name (there is still no option to set a custom name)	2015-08-10 10:35:55 +02:00
Daniele Gobbetti	fd5a620091	re-add support for NO_RESPONSE write characteristic	2015-08-10 09:20:06 +02:00
Andreas Shimokawa	d983d7a5c4	Pebble: answer pings from the watch	2015-08-09 21:42:27 +02:00
Andreas Shimokawa	27f88e484d	Make ControlCenter only ask for version details after device is initialized ... This allows removal of a workaround which allowed ACTION_REQUEST_VERSIONINFO to be used in connected state (instead of initialized state)	2015-08-07 22:07:48 +02:00
Daniele Gobbetti	fe11e6d306	Some BTLE cleanup: ... - the BASE_UUID is shared between all BTLE devices, not miband specific. So are the UUID DESCRIPTORS. Hence these have been moved to AbstractBTLEDeviceSupport - the gatt-characteristic-property-constants used previously in MiBandNotifyAction are also general, and exposed by the gatt subsystem, hence the specific action has been dropped moving the logic to the NotifyAction class - the logic for checking the gatt-characteristic-property-constants has been extended also to the ReadAction and WriteAction class, this way we won't try to read (or write) a characteristic that isn't readable (or writeable)	2015-08-07 16:59:52 +02:00
Andreas Shimokawa	6125594703	Various changes related to INITIALZED device state ... Due to a bug in DeviceCommunicationService.isConnected(), devices using the INITIALIZED state only worked when they had useAutoConnect set to true (Mi Band) Now setting devices to INITIALIZED state to allow any action send to DeviceCommunicationService is mandatory. As an exception only REQUEST_VERSIONINFO will be also be allowed for CONNECTED state. This also fixes a problem when notifications came in on the Pebble with 3.x FW before we actually knew it was FW 3.x (INITZALIZED state on the Pebble now implies that we know the FW version)	2015-08-07 13:24:54 +02:00
cpfeiffer	9004a8b0c1	Experimental: ACTION_START is now optional -- ACTION_CONNECT is sufficient	2015-08-06 23:17:41 +02:00
cpfeiffer	f4cb798977	Extract a method for easier reuse if necessary	2015-08-06 22:24:44 +02:00
cpfeiffer	64298fc9af	Small improvements for the install activity #30 ... Now starts the service if not already running	2015-08-06 21:35:00 +02:00
cpfeiffer	2a2eae068a	Improvements to the install activity #30 ... - made it independent of Mi fw and Pebble fw + app classes - automatically connect to the last used device - some other small fixes/improvements	2015-08-06 02:17:38 +02:00
cpfeiffer	8dee55198e	Don't (always) leak the file descriptor. ... It's still very much possible to leak the descriptor (when an exception occurs somewhere in between or anything else goes wrong). So maybe the whole thing should be redesigned to be independent of files.	2015-08-06 00:45:07 +02:00
cpfeiffer	b7223c7e86	Initial support for transaction-local GattCallbacks (not used yet) ... So that we won't have to mix everything in MiBandSupport	2015-08-05 23:26:09 +02:00
Daniele Gobbetti	495a8cc650	Reorder the lines in the MiBandService class. ... No functional changes, just clarity enhanchement.	2015-08-05 17:32:02 +02:00
Daniele Gobbetti	65fc6f6866	Adapt the Firmware installer activity to the new FirmwareHelper	2015-08-05 17:31:11 +02:00
cpfeiffer	e92c9dbbb5	Better check for fw version major (#30)	2015-08-04 23:08:40 +02:00
cpfeiffer	910d9ef398	Make firmware reading a bit more failsafe #30	2015-08-04 23:02:36 +02:00
cpfeiffer	bdc9e70e6e	Attempt to fix reconnection problems after being away from the Mi Band ... *untested*	2015-08-04 22:03:10 +02:00
cpfeiffer	c407ed1a76	Last refactoring for now: BluetoothCommunicationService ... - rename to DeviceCommunicationService - move all bluetooth related bits into separate DeviceSupportFactory class	2015-08-04 01:01:14 +02:00
cpfeiffer	db4261e02b	More refactoring: new service/devices package and service/bt package	2015-08-03 23:51:53 +02:00
cpfeiffer	7c597b325a	Big refactoring: move classes and packages around to get a better structure ... - model package contains mostly shared interfaces (UI+service), not named GB* - impl package contains implementations of those interfaces, named GB* the impl classes should not be used by the service (not completely done) - the service classes should mostly use classes inside the service and deviceevents packages (tbd) Every device now has two packages: - devices/[device name] for UI related functionality - service[device name] for lowlevel communication	2015-08-03 23:09:49 +02:00
Daniele Gobbetti	afc4c9efaa	Added some javadocs	2015-08-03 18:35:58 +02:00
Daniele Gobbetti	c798cd00fe	Prevent tearing of the barchart values over other graph elements	2015-08-03 18:34:58 +02:00
cpfeiffer	802f48011d	Refactoring of database access ... - the db is now exclusively locked for one thread - the charts read from the db and analyze data in a background thread + some small cleanups	2015-08-03 01:21:44 +02:00
cpfeiffer	9ca595a5cb	Some javadocs	2015-08-02 00:12:21 +02:00
Daniele Gobbetti	46ee5a5499	Send the wear location (left hand / right hand) to the MiBand.	2015-07-31 16:19:32 +02:00
Daniele Gobbetti	69ddead8fb	Reorder the COMMAND_ constants so that they are in numerical order	2015-07-31 16:19:03 +02:00
Daniele Gobbetti	5b3510fade	Update the firmware-update notification based on the feedback we get from the band.	2015-07-31 16:18:09 +02:00
Daniele Gobbetti	2208d5088b	Remove the timeout and handle the messages that the band sends back to acknowledge its status. ... This should make the firmware transfer much more reliable and hopefully release-ready.	2015-07-31 12:30:42 +02:00
Daniele Gobbetti	fbbc2afda4	Add a timeout of 1 second before rebooting after firmware update.	2015-07-31 11:28:03 +02:00
Andreas Shimokawa	0eeb5a6479	PebbleGadgetBridgeSampleProvider: properly override getID()	2015-07-29 23:28:10 +02:00
Daniele Gobbetti	878afd79df	Allow the user to set the target number of steps for each day (fitness goal), both in the sharedpreferences and in the MiBand. ... The value is then used in the graphs. #31 #44	2015-07-29 18:49:16 +02:00
Daniele Gobbetti	27669761bf	Fix potential race condition when counted steps are above the daily target. ... Also added a few comments wrt the labels and the values of the pie chart.	2015-07-29 18:07:35 +02:00
Daniele Gobbetti	c05cfc775e	New chart showing the steps done today and in the last week. ... #31 #44	2015-07-29 16:30:19 +02:00
Andreas Shimokawa	f51ffcf16f	Use animated upload icon for installation progress notification ... Also fix a bug which caused the main gadgetbridge service notification to be reused for the installation notification	2015-07-28 23:10:21 +02:00
Daniele Gobbetti	1bef702485	Send the progress updates from the actual BT transfer, which is where most of the time is spent.	2015-07-28 22:38:52 +02:00
Daniele Gobbetti	23f752dc20	New firmware tested.	2015-07-28 22:03:53 +02:00
Daniele Gobbetti	14f754306d	Use a single queue for the whole firmware transfer. ... At the moment the progress bar code is not useful because the FW preparation is almost instantly done, and is the BT transfer that takes time. The transfer happens when the getQueue method is called, and there is no progress info that I can find.	2015-07-28 19:15:25 +02:00
Andreas Shimokawa	732f26823b	move installer progressbar from PebbleIoThread to GB and use that for Mi Band fw installation	2015-07-28 18:44:54 +02:00
Andreas Shimokawa	9f591ef8b5	Refactoring: Merge Pebble app/fw installer activity and Miband firmware update Activity	2015-07-28 17:30:20 +02:00
Andreas Shimokawa	c3853c7735	Merge remote-tracking branch 'origin/firmware_update'	2015-07-28 16:21:57 +02:00
cpfeiffer	858c962dd0	Refactoring #45 ... - add some device and db independent model interfaces for activity samples - use these model interfaces where possible - chart activity does not do device dependent rendering anymore and uses normalized values for all devices - initial interface for daily summaries	2015-07-28 00:05:05 +02:00
Andreas Shimokawa	91b8d7789d	Pebble: improvemnts for upcoming Gadgetbridge Pebble watchapp	2015-07-27 23:21:06 +02:00
Andreas Shimokawa	dbbcf20bbc	reformat code	2015-07-25 21:52:52 +02:00
Daniele Gobbetti	47cbf68c37	Merge remote-tracking branch 'upstream/master' into firmware_update	2015-07-25 21:36:46 +02:00
Daniele Gobbetti	8f840df5f6	Set GB notification visibility to public. ... This way on android 5 the status of the connection is shown also on the lockscreen even if the user chose to hide sensible content of the notifications.	2015-07-25 21:14:18 +02:00
cpfeiffer	716bbc7b78	Avoid NPE when fetching activity data: ... java.lang.NullPointerException: Attempt to write to field 'int nodomain.freeyourgadget.gadgetbridge.miband.MiBandSupport$ActivityStruct.activityDataHolderProgress' on a null object reference at nodomain.freeyourgadget.gadgetbridge.miband.MiBandSupport.flushActivityDataHolder(MiBandSupport.java:748) at nodomain.freeyourgadget.gadgetbridge.miband.MiBandSupport.handleActivityNotif(MiBandSupport.java:689) at nodomain.freeyourgadget.gadgetbridge.miband.MiBandSupport.onCharacteristicChanged(MiBandSupport.java:583) at nodomain.freeyourgadget.gadgetbridge.btle.BtLEQueue$2.onCharacteristicChanged(BtLEQueue.java:369)	2015-07-25 00:09:24 +02:00
cpfeiffer	a1f60aab91	Fix logging configuration ... Make sure to not invoke any logging before it is properly configured.	2015-07-25 00:09:24 +02:00
Andreas Shimokawa	49cc4ec9d6	Pebble: for 3.x notification, do not zero parent UUID ... instead reuse the same reandom UUID again.	2015-07-24 09:33:20 +02:00
Andreas Shimokawa	91cc19befe	Pebble: spoof a newer application version (3.x)	2015-07-24 01:34:50 +02:00
Daniele Gobbetti	f16a96e9b2	Initial support for upgrading firmware of the MiBand. ... This release seems to be working quite well with respect to the firmware upgrading itself. The user facing part needs more work. In order to update the firmware one has to: - open a file ending with .fw - switch from the firmware upgrade activity to the main one - connect to the miband - return to the firmware upgrade activity - press the "install" button (that became active when the device connection was established) Caveats: There are almost no check wrt. the integrity of the firmware files.	2015-07-23 17:14:51 +02:00
Andreas Shimokawa	268e658e6f	rename ACTION_INSTALL_PEBBLEAPP to ACTION_INSTALL	2015-07-23 12:09:01 +02:00
Andreas Shimokawa	5c26b2281f	Pebble: try to support notification dismissal on the Pebble Time (completely untested)	2015-07-22 20:53:18 +02:00
cpfeiffer	34dde2eb64	Eek	2015-07-21 22:30:11 +02:00
cpfeiffer	383a300566	Remove superfluous field	2015-07-21 22:29:29 +02:00
cpfeiffer	76fcbfcb52	Move activity data values into a separate struct (#45) ... - saves some memory - allows us to show the toast for the first chunk only	2015-07-21 22:27:15 +02:00
Andreas Shimokawa	b3a04f7afb	Pebble: more length calculation fixes for 3.x notifications with actions	2015-07-21 22:05:25 +02:00
Andreas Shimokawa	6c1e41b4ec	Pebble: fix some totaly obvious length calculation errors for actionable 3.x notifications	2015-07-21 21:56:11 +02:00
cpfeiffer	3662f32dbf	Remove duplicated constants	2015-07-21 21:42:04 +02:00
cpfeiffer	3590c7c853	Remove inadvertently re-added busy-state handling	2015-07-21 21:40:06 +02:00
Andreas Shimokawa	3c35f94a7e	Pebble: enable dismiss action on FW 3.x if force option is set ... NOTES: - Might break notifications altogehter (can't test) - Cannot work because we do not interpret the response yet.	2015-07-21 21:32:05 +02:00
cpfeiffer	1f2b0329c5	Misc improvelets (#45)	2015-07-21 21:24:35 +02:00
Andreas Shimokawa	c9ab10e7e8	Pebble: commit missing PebbleProtocol changes for experimental notification dismissal	2015-07-21 01:33:13 +02:00
Andreas Shimokawa	74e1598bf7	Pebble: add experimental and incomplete support for dismissing 2.x notifications ... Currently this dismisses all notifications on the Phone-	2015-07-21 01:27:05 +02:00
cpfeiffer	0f6491a11d	More WIP: sync from the charts activity ... Also add preliminary buttons to go forward/backward in time.	2015-07-21 00:06:20 +02:00
cpfeiffer	13d2c2166c	Let DeviceCoordinator decide which activity to launch on click	2015-07-20 23:57:01 +02:00
cpfeiffer	184e0f2dea	New dependency to format durations (and use that where applicable)	2015-07-20 23:14:08 +02:00
cpfeiffer	4aa80c149c	Add some code to set the Mi Band latency	2015-07-20 21:43:23 +02:00
cpfeiffer	5d121e6e8f	Fix a pointer aliasing issue, add some constants, remove invalid "checkpointing"	2015-07-20 21:41:18 +02:00
Daniele Gobbetti	d967411d70	Add a toast to let the user know about the progress of the transfer.	2015-07-19 16:16:58 +02:00
Daniele Gobbetti	6953086c99	Allow setting alarms once for the next day. ... (cherry picked from commit 417ea02)	2015-07-19 15:58:30 +02:00
Daniele Gobbetti	7f7cea75c1	Spare some complexity by letting the writer change the status to non-busy. ... Before the code looked for the values written to the device with another method.	2015-07-19 15:52:27 +02:00
Andreas Shimokawa	f847d834af	Pebble: always force 3.x notifications on FW 3.x	2015-07-19 00:26:43 +02:00
Andreas Shimokawa	e6bc406d98	Fix funny typo :D ... Thanks to @girlwithnoname for spotting	2015-07-18 23:38:59 +02:00
Andreas Shimokawa	095c70d469	Pebble: preparations for WIP Gadgetbridge Pebble App	2015-07-15 00:33:44 +02:00
cpfeiffer	d498bd976a	Work in progress #45 ... Comparison between Light Sleep and Deep Sleep. (Currently wrong, needs more analysis)	2015-07-14 00:29:32 +02:00
cpfeiffer	b1e2671bec	limit maximum intensity to 180 for now... maybe make this configurable #45	2015-07-13 21:55:52 +02:00
cpfeiffer	04e628b2d1	Separate fragments for all activity kinds and just sleep #45	2015-07-13 21:54:46 +02:00
cpfeiffer	8b44f90bb6	Some more refactorings to support different charts	2015-07-12 23:42:23 +02:00
cpfeiffer	f53a037d7f	Use query instead of rawQuery	2015-07-12 21:50:09 +02:00
cpfeiffer	623e4724c2	Slightly better text when no data available	2015-07-12 21:48:48 +02:00
cpfeiffer	6553558947	Experimental code for an activity sync problem. Commented out for now. #45 ... @daniele do you have an idea what this byte equence on the control point characteristic could mean (and why the transfer stops then)?	2015-07-12 00:02:51 +02:00
cpfeiffer	b516ceda01	Support for displaying Toasts from non-ui threads	2015-07-11 21:49:51 +02:00
cpfeiffer	be45f7fe0c	check if table exists before dropping	2015-07-11 21:16:07 +02:00
cpfeiffer	a6e26e5ddc	Cleanup, use fragment based charts (WIP #45) ... Known issue: scrolling a zoomed-in chart interferes with swiping to the next/previous chart (so far there's just one, but...) Workaround: Swipe down and then left or right in one go, this will let you scroll the zoomed chart	2015-07-11 00:03:41 +02:00
cpfeiffer	7c61bbb2be	Logging to find the cause for seldom device state/notification mismatch	2015-07-10 21:35:28 +02:00
cpfeiffer	40be935abd	Better time format for action logging	2015-07-10 21:02:03 +02:00
cpfeiffer	8b54c6e5c4	New incremental, cumulative database upgrades and downgrades	2015-07-10 00:31:45 +02:00
cpfeiffer	cc549a6c49	Basic database import and export (to external storage) ... (In the Debug Activity)	2015-07-08 23:11:23 +02:00
Andreas Shimokawa	cdd26a43d2	Do not allow alarm to start alarm activity from a long press on a Pebble	2015-07-05 00:41:06 +02:00
cpfeiffer	f36caafc54	Fixed syncing activity data (#45) ... Bytes 1-6 represent the date/time, so we should not try to check for this. Thanks a lot, Daniele!	2015-07-04 22:22:59 +02:00
cpfeiffer	580b86f41b	Add creation timestamps to BtLEActions and transactions in debug output ... (I think I still sometimes get "old" notifications)	2015-07-03 21:58:13 +02:00
Andreas Shimokawa	dfea2cbcc1	fix find device which started alarm activity	2015-06-30 21:18:27 +02:00
Andreas Shimokawa	b25d771ee9	reformat code	2015-06-30 12:09:29 +02:00
Andreas Shimokawa	594bf8c45b	Merge pull request #81 from Freeyourgadget/set-alarm-tomerge ... Set alarms on device (miband)	2015-06-30 09:43:51 +02:00
Daniele Gobbetti	3068d687bf	Adressed some of the observations made re the last commits.	2015-06-30 06:40:46 +02:00
Daniele Gobbetti	371a7bb4af	Get rid of the Checkedtextview because they weren't in line with the our style	2015-06-30 06:40:46 +02:00
Daniele Gobbetti	900511760c	further improvements: ... - the day of week are evenly spread across the screen in the alarms detail activity - the alarms are stored in a single shared preference (as a set) NB: you'll have to reset your alarms if you used a previous version (and also manually clean the shared preferences, but this is not needed) - the list of alarms gets correctly updated after editing a specific alarm - the actionbar back button saves the alarm status, the device back button doesn't. I'm not sure if it's a bug or a feature :)	2015-06-30 06:40:46 +02:00
Daniele Gobbetti	109b2bef4d	add a Toast to confirm the transfer of the alarm or to warn if the transfer wasn't possible.	2015-06-30 06:40:46 +02:00
Daniele Gobbetti	dc3ed1659c	use parcelable for passing alarms around	2015-06-30 06:40:46 +02:00
Daniele Gobbetti	764dd70e45	low hanging fruits: ... - add break after case - center vertically the smart wakeup checkbox	2015-06-30 06:40:46 +02:00
Daniele Gobbetti	1caca1439a	Initial implementation of setting alarms to the Mi Band. ... The code basically works, but there a lot of things to fix / improve. * The alarms are stored to and read from the Shared Preferences, but there is no persistence within the app (basically they are read and stored at every access) * The alarm list is not updated when coming back from the alarm detail view (probably related to the point above), but the actual alarm is * The alarms preference names is sometimes built by concatenating strings, which is not really safe * There is no check in the alarm constructor whether the stored string is a valid alarm representation * Even though only 3 alarms can be stored on the device, we could have more in the app and let the user choose which to sync * In the alarm detail view XML some material* drawables are used, it's possible that these break on android version < 5 * ...	2015-06-30 06:40:14 +02:00
cpfeiffer	ef2bbf13c7	Close stream on error and log exception	2015-06-29 22:38:37 +02:00
Andreas Shimokawa	27e611c583	add share action to screenshots in notification ... Now you can brag with your pebble watchfaces and send them straight to Conversations.	2015-06-27 18:09:49 +02:00
Andreas Shimokawa	c16510003c	Open image viewer when tapping on screenshot	2015-06-27 00:21:30 +02:00
Andreas Shimokawa	44636748e7	Show screenshot in notification in successful	2015-06-26 23:17:31 +02:00
Andreas Shimokawa	a73d8b7f0a	Pebble: save screenshots as 1bit Windows 3.x BMP ... TODO: - user feedback - support Pebble Time	2015-06-25 23:34:50 +02:00
Andreas Shimokawa	d0178686d8	Pebble: support for taking screenshots (do not get displayed/written anywhere yet)	2015-06-24 23:55:51 +02:00
Andreas Shimokawa	07d59322bd	Pebble: Preparations for taking screenshots ... This commit also includes some cleanups and removal of unused code/strings	2015-06-24 00:23:38 +02:00
cpfeiffer	4b241ca9eb	Initial work on supporting multiple charts. ... - one fragment per chart screen - common chart code should move to fragment baseclass and the host Activity (ChartsActivity) Currently it's not used, change ControlCenter to invoke ChartsActivity instead of SleepChartActivity to test it. WIP for #79	2015-06-23 23:03:05 +02:00
Andreas Shimokawa	5ae812c854	add GBDeviceProtocol again	2015-06-23 14:20:13 +02:00
Andreas Shimokawa	73da7fff0a	Refactoring: rename GBDeviceCommand to GBDeviceEvent	2015-06-23 11:54:33 +02:00
Andreas Shimokawa	c2582e1e1f	Not not display useless menu items when device is not connected ... Also remove "fetch activity data" from pebble context menu, which currently does nothing Closes #75	2015-06-22 22:16:19 +02:00
Andreas Shimokawa	1bd32b713a	Pebble: implement encodeFindDevice() by simulating a call	2015-06-21 23:53:23 +02:00
cpfeiffer	39db968e34	Forgot to rename that method, too (#42)	2015-06-21 20:59:36 +02:00
cpfeiffer	23d91ac79e	Support for finding a lost device (closes #42)	2015-06-21 19:46:02 +02:00
cpfeiffer	c7b4f295a1	Support for vibration profiles, configurable for notifications ... Configurable for sms, k9, incoming calls, pebble messages, generic notifications. Color is unfortunately not configurable so far, see #37 Closes #29 Currently provided profiles are - staccato - short - medium - long - waterdrop - ring - alarm clock	2015-06-21 19:46:01 +02:00
cpfeiffer	f105bbbde3	Avoid crash when getExternelDir() returns null (huh!)	2015-06-21 19:44:56 +02:00
cpfeiffer	1fb20926b3	Fix previous commit, disable LimitLines for this release	2015-06-21 19:43:45 +02:00
Andreas Shimokawa	b1973994f0	Sleep Monitor: Disable anotations for now (produces unreadable output on some devices)	2015-06-21 16:39:03 +02:00
Andreas Shimokawa	2458e55865	Pebble: add encodeSimpleMessage() for encoding 1 byte messages to endpoints	2015-06-19 23:54:31 +02:00
Andreas Shimokawa	7e1700250f	Pebble: add dev option to force latest notification protocol usage ... When enabled it forces to use 3.x notifications on FW 3.x (2.x notifcations on FW 2.x) When disabled 2.x notification on FW 2.x and 1.x notifications on FW 2.x are used (which is recommended) This allows Pebble Time users to do further tests.	2015-06-19 12:34:33 +02:00
cpfeiffer	e562fa9870	Light sleep and deep sleep was mixed up. Corrected graphs again. #45 ... Use dashed limit lines, still not perfect.	2015-06-19 01:14:58 +02:00
cpfeiffer	f9e5ab5fc1	Some more refinements to sleep display (#45): ... - display the recorded level of deep sleep rather than a constant (I hope this works for morpheuz, too!?) - give light sleep a minimum value, because it's sometimes 0 for Mi Band	2015-06-19 00:20:38 +02:00
cpfeiffer	03fa05756e	As a test, draw limit lines for sleep/activity changes. ... Unfortunately it looks like the labels for it don't get rendered ;-(	2015-06-18 23:41:54 +02:00
cpfeiffer	83079b0456	Stub for device notification changes	2015-06-18 23:07:22 +02:00
Daniele Gobbetti	cb3be26349	Do something when we receive a CharacteristicChanged message ... on the UUID_CHARACTERISTIC_BATTERY characteristic. This is a first try at addressing #71 Please note that this will probably not work at this point, but it's worth a try. To make it work probably we have to tell the device to send updates, and we don't know how to do it.	2015-06-18 22:17:41 +02:00
Andreas Shimokawa	1801a679c5	Pebble: fix FW 3.x detection	2015-06-18 18:39:32 +02:00
Andreas Shimokawa	bffd7f332f	remove SleepChartActivityOld, as the new one is usable now ;)	2015-06-17 08:18:24 +02:00
cpfeiffer	a5ae7acc63	Improved sleep chart #45 ... - use just one data set, because multiple data sets is not supported by MPAndroidChart (the way we need it) Now there is hardly any space between the bars anymore Also: - allow scaling x and y axis independently via pinch gesture - set fixed y max value (1.0) so that the display is stable and independent of the actual available data - (at least temporarily) display y labels	2015-06-17 07:03:50 +02:00
cpfeiffer	8709b95a95	Use a single data set instead of one per activity kind ... The reason is that multiple data sets will always be grouped. If we add null values to fix the grouping issue, we will still have space between the bars.	2015-06-17 07:03:50 +02:00
Andreas Shimokawa	a07aed62ad	Pebble: Experiment with 3.x compatible notifications ... This will most probably not work, but please test if you can ;)	2015-06-16 23:15:51 +02:00
Andreas Shimokawa	70c021e92c	SleepChartActivity: Make light sleep color brighter	2015-06-13 20:47:36 +02:00
Andreas Shimokawa	73187431b2	Use old Sleep Monitor Activity for Pebble/Morpheuz ... The new one does not look good with Morpheuz data yet (samples every 10 minutes)	2015-06-13 20:37:53 +02:00
Andreas Shimokawa	d2f7169de4	Really, I see no reason to look up a string for a preference key in an xml file ... If we have to use a key to lookup the string for the key, we can just use that key as the preference key.	2015-06-13 01:12:08 +02:00
Andreas Shimokawa	56d314d054	Reformat code and optimize imports	2015-06-13 00:32:48 +02:00
Andreas Shimokawa	ad4f708140	Send 2.x style notifications when on FW 3.x (on FW 2.x else use 1.x style notifications) ... This could improve #24. Unfortunally I cannot test it since I have no Pebble Time.	2015-06-13 00:26:55 +02:00
Daniele Gobbetti	ac7e21be48	Remove the activity log debug file. ... This partially reverts commit 8b268a676c	2015-06-12 22:30:14 +02:00
Daniele Gobbetti	376f9c53a0	Fix crash on startup ... Fixed a typo that was causing a force close on database creation.	2015-06-12 21:26:11 +02:00
Daniele Gobbetti	75de3b21e1	Use colors that are easier on the eyes ... Changed the colors of the Deep-/Light Sleep and Activity datasets. * Deep sleep has been used as basic color, * Light sleep is a color that is monochromatically analogous * Activity is a color triadic to the basic one	2015-06-12 11:17:44 +02:00
cpfeiffer	8aef92026c	A new sleep chart based on MPAndroidChart 45 ... - supports zooming an panning - displays labels for all x-values (= time of day) - fix deep vs. light sleep constants - increase activity data buffer size for Mi Band	2015-06-11 23:37:00 +02:00
Andreas Shimokawa	9051e10aad	switch constants for deep sleep and light sleep to match native miband data	2015-06-11 23:00:59 +02:00
Andreas Shimokawa	dfcad94c2c	Pebble: Make firmware installation possible from recovery (Closes #54) ... Also make HW revision displayable for Pebble Time.	2015-06-11 20:40:31 +02:00
cpfeiffer	d0b9914770	Keep the db open while adding samples	2015-06-09 21:05:44 +02:00
cpfeiffer	e78e79a9a9	Added missing returns..	2015-06-08 23:31:12 +02:00
Andreas Shimokawa	efac912929	Pebble: Fix error when reinstalling apps, useful for upgrading/downgrading ... Fixes #65	2015-06-08 22:38:58 +02:00
Andreas Shimokawa	4f8a7ea64d	Misuse device_candidate_item insead of device_item for AppManager	2015-06-07 22:02:40 +02:00
Andreas Shimokawa	c98716d469	Morpheuz support: Fix 3.1 compatibility	2015-06-07 21:49:05 +02:00
cpfeiffer	ba76f64bf6	Disable context menu while busy and add "Disconnect" to context menu	2015-06-07 15:31:42 +02:00
cpfeiffer	ab97b544f0	Some cleanup + actually remember event time and kind for throttling	2015-06-06 23:59:53 +02:00
cpfeiffer	f5a569610f	Wrap DeviceSupport instances. ... The wrapper provides support for busy-checking and throttling (sometimes I get multiple events of the same kind within milli seconds and the Mi Band vibrates 20 times)	2015-06-06 23:54:34 +02:00
cpfeiffer	f6d5767276	Remove reference to PebbleIOThread from BluetoothCommunicationService ... Let PebbleSupport do this instead.	2015-06-06 23:24:00 +02:00
cpfeiffer	3fe9195d0d	Avoid warning in unsetDynamicState()	2015-06-06 23:13:26 +02:00
cpfeiffer	020d8d74d6	Added "Fetch Activity Data" to the context menu. ... With some kind of progress reporting during the fetching #45	2015-06-06 19:39:04 +02:00
cpfeiffer	9e4e50be47	Initial work on synchronizing activity data with feedback. ... A device now has a busy flag (set during synchronization). While busy, no other communication with the device shall occur (TODO) Refactors the non-bluetooth actions a bit #45 Next step: make use of the busy state in ControlCenter (show a busy cursor) and in BluetoothCommunicationService (to not call other operations while busy)	2015-06-06 00:40:16 +02:00
cpfeiffer	2f0d00d645	avoid WITHOUT ROWID when not running at least lollipop #62	2015-06-06 00:10:38 +02:00
cpfeiffer	1e89b12b15	Avoid creating lots of SimpleDateFormat instances	2015-06-05 23:09:28 +02:00
cpfeiffer	dea4ee82a1	Merge branch 'db_refactoring_proposal'	2015-06-05 21:57:55 +02:00
cpfeiffer	c4096e6d3c	Add daniele's db optimization the WITHOUT ROWID ... closes #62	2015-06-05 21:46:56 +02:00
Andreas Shimokawa	b12a3e74cd	MorpheuzSupport: remove limit of 54 samples. Morpheuz 3.1 supports 60	2015-06-05 20:26:11 +02:00
Andreas Shimokawa	baecc20742	SleepMonitorActivity: Rotate annotation text for better readability	2015-06-05 19:59:58 +02:00
Andreas Shimokawa	813a02d5c7	Unify SleepMonitor with code from PR #59. Thanks Daniele!	2015-06-05 19:32:09 +02:00
cpfeiffer	2f1908e480	Make sure to always close the database	2015-06-04 23:45:46 +02:00
Daniele Gobbetti	fc374881c5	Get rid of the unused ID in the DB, this could help in: ... * reducing the used space * reducing the time needed for inserts	2015-06-04 21:37:48 +02:00
Carsten Pfeiffer	7ad38c5e1a	Merge pull request #61 from danielegobbetti/fix_data_in_the_future ... Do not iterate over the whole buffer, but only on the effectively use…	2015-06-04 21:15:52 +02:00
Daniele Gobbetti	a1ff9aab21	Do not iterate over the whole buffer, but only on the effectively used part. ... This should fix the "data in the future" issue	2015-06-04 18:56:35 +02:00
Andreas Shimokawa	7d86396e30	Support CM 12.1 Music App	2015-06-02 21:48:21 +02:00
Daniele Gobbetti	406f9ab90d	Do not allocate the buffer if there's no data available. ... Perhaps could fix the "data in the future" issue	2015-06-02 18:33:12 +02:00
Daniele Gobbetti	9e2d32c33f	Fixed timestamp conversion for DB, added local variables to make the code clearer	2015-06-01 22:20:28 +02:00
Daniele Gobbetti	ea97a902d1	*unchecked* Storing activity values in the DB.	2015-06-01 22:20:28 +02:00
Daniele Gobbetti	8b268a676c	Refactoring of the data ingestion method. ... * no more ByteBuffer, but a fixed size byte array that gets flushed everytime it's needed * log of activity data to a separate file (no DB integration yet) * the size of the buffer must be a multiple of 3 (1 minute of data = 3 bytes) and 20 (the normal size of the chunks we get from the device) * better logging and more comments in code	2015-06-01 22:20:22 +02:00
cpfeiffer	5d950dc407	Fix reconnection after connection loss ... Well, obviously we must not ignore connection state changes even if they come with an error code. Unfortunately the API docs are a bit terse in that respect.	2015-06-01 21:47:02 +02:00
cpfeiffer	7f89f4bb57	Some fixes regarding device initialization, should avoid disconnects ... Avoid repeated initializations and device info requests. Fix unsetting of dynamic state (e.g. battery info) when initialized.	2015-06-01 21:47:02 +02:00
Daniele Gobbetti	f60903699e	Delete MiBandSupport.java.orig ... I believe it was committed by mistake (perhaps a merge conflict?) It's out of date in any case.	2015-06-01 21:47:02 +02:00
cpfeiffer	11884d8073	Improve logging	2015-06-01 21:47:02 +02:00
cpfeiffer	75b9fe4c4d	ignore connection state changes with status != GATT_SUCCESS ... And add logging. Maybe this helps with #57	2015-06-01 21:47:02 +02:00
Daniele Gobbetti	228e922ce7	forgotten refactor of a variable	2015-06-01 21:47:01 +02:00
Daniele Gobbetti	e4076dc725	Ingesting the activity data the right way, but they are still being thrown away afterwards.	2015-06-01 21:47:01 +02:00
cpfeiffer	92caed5af4	Some cleanup	2015-06-01 21:47:01 +02:00
cpfeiffer	a7792f6b72	improve some log statements	2015-06-01 21:47:01 +02:00
cpfeiffer	637b43e892	Also wait for descriptor reads and writes ... (not just characteristic reads/writes) This fixes initialization of notification characteristics (activity, sensor data, battery, ...)	2015-06-01 21:47:01 +02:00
cpfeiffer	f004b7b11c	WIP for fetching activity data ... This probably affects #44 and #45 Thanks go to Daniele Gobbetti <daniele@gobbetti.name>!	2015-06-01 21:47:01 +02:00
Andreas Shimokawa	6ea9537d38	Start sleep activity with context menu (long press on a device) ... This allows to see sleep data even if devices are not connected.	2015-06-01 16:57:45 +02:00
Andreas Shimokawa	81b1d1d28d	Pebble: Put WeatherNeat test in separate file	2015-05-30 22:24:53 +02:00
Andreas Shimokawa	603d31a59e	add some constants to GBActivitySample	2015-05-30 21:52:29 +02:00
Andreas Shimokawa	41207516b1	Move BluetoothChangeReceiver to externalevents	2015-05-30 21:40:42 +02:00
Andreas Shimokawa	900b3f3833	use ORDER BY timestamp in SQL statement ... Also optimize imports...	2015-05-30 17:40:23 +02:00
Andreas Shimokawa	e79f4523c3	Add SQLite database support for activity data ... This is now used for morpheuz data and the SleepMonitorActivity	2015-05-30 17:28:03 +02:00
Andreas Shimokawa	08fbbb9152	SleepMonitor: draw colored bars instead of a graph ... red = awake yellow = light sleep greep = deep sleep	2015-05-27 00:59:05 +02:00
Andreas Shimokawa	8366af736c	Pebble: Fix firmware installation when all 8 app slots are in use ... We were trying to get a free slot when installing a firmware which is not neccessary. This should also fix firmware installation in recovery (#54)	2015-05-25 01:26:27 +02:00
Carsten Pfeiffer	6fb6b5c164	Merge pull request #55 from danielegobbetti/master ... Use constants instead of hardcoded values	2015-05-24 23:16:52 +02:00
cpfeiffer	8a26ce9d67	Pull evaluateGBDeviceCommand() and handle* methods up ... Otherwise, MiSupport can't use 'em	2015-05-23 00:54:14 +02:00
cpfeiffer	4518e8819d	Make file-logging configurable	2015-05-23 00:45:12 +02:00
cpfeiffer	880dc7b3a4	Improve BLE gatt handling ... - close() the gatt instance when explicitly disconnecting - create a new gatt instance when explicitly connecting Unfortunately I still appear to get spontaneous disconnects after some notifications.	2015-05-22 23:18:29 +02:00
Andreas Shimokawa	f54927624b	Move non Pebble specific code from PebbleIoThread to AbstractBTDeviceSupport	2015-05-22 20:20:33 +02:00
Andreas Shimokawa	8309234784	Pebble: fix wrong calculation of timestamp.	2015-05-21 18:57:34 +02:00
Daniele Gobbetti	7e2545f9b4	Use constants instead of hardcoded values	2015-05-21 18:19:07 +02:00
Andreas Shimokawa	68b76aa5c5	Pebble: Get Morpheuz sleep data visualize through SleepMonitorActivity ... This very very experimental, and needs a complete overhaul. But it is a start ;)	2015-05-21 18:17:39 +02:00
Andreas Shimokawa	1c5d6de3ad	Pebble: fix App installation	2015-05-18 23:14:32 +02:00
Andreas Shimokawa	50c7206cf6	Pebble: implement reboot	2015-05-18 22:40:39 +02:00
Andreas Shimokawa	c4f7fc1531	Start App on Pebble when tapping it AppManager	2015-05-18 22:20:01 +02:00
Andreas Shimokawa	c37cacf43d	Remove id and index from GBDeviceApp in favor of UUIDs	2015-05-18 20:56:19 +02:00
cpfeiffer	d1d3e758d9	Support configurable notifications. Closes #53 ... To close #29, we need to have a bit more configuration options than just the number of vibrations. E.g. - duration - pause - LED flashing (again, number of flashes, duration and pause, but also the colour and maybe which LEDs) Also implements reboot-functionality for Mi Band.	2015-05-17 22:57:37 +02:00
cpfeiffer	14a05c3383	Initial support for rebooting the device ... (via the Debug activity) Attention: no safety-confirmation dialog yet!	2015-05-17 21:58:08 +02:00
cpfeiffer	9819819b92	Create the wait-latch before running the action, and only if neeeded ... Otherwise the result handler might be called before the wait-latch has been created, leading to a deadlock of the thread. Also: only wait for read- and write actions, but not for wait-actions.	2015-05-17 21:55:02 +02:00
Andreas Shimokawa	55400817b4	Pebble: experiment with extensible notifications ... This allows lot more flexible notifications including custom actions (replys, etc) When used without actions it could serve as a simple replacement for the current notifications. The main showstopper is that I do not know how to assign icons (mail, chat) to these. Unfortunately I ended up in recovery when playing around with unknown parameters trial&error style.	2015-05-15 21:34:38 +02:00
Andreas Shimokawa	2b98620ee0	Mi Band: Prepare preferences for vibration count, use number as input type for numeric field	2015-05-14 13:04:21 +02:00
cpfeiffer	562840a7c5	Actually call the new generic notification handler	2015-05-14 00:04:54 +02:00
Andreas Shimokawa	80eb386dd8	fix DebugActivity, was broken since we translated it :/	2015-05-13 23:21:49 +02:00
cpfeiffer	d2bcccaeef	Use logback-android for logging to external storage ... (no WRITE_EXTERNAL_STORAGE permission necessary!)	2015-05-13 23:15:20 +02:00
cpfeiffer	27d725853f	Add extra handler for generic notifications ... (instead of misusing onSMS handler). Pebble still does that, but not everybody has to. Small step for #53	2015-05-13 21:55:22 +02:00
Andreas Shimokawa	c81e28c030	simplify code	2015-05-12 20:32:34 +02:00
Andreas Shimokawa	1b2f20160a	fix some lint warnings, mostly simplifications	2015-05-12 20:09:35 +02:00
Andreas Shimokawa	f8341918ee	compile fix	2015-05-12 11:12:53 +02:00
Andreas Shimokawa	7540a3955b	Pebble: experiment with launching watchapps from Gadgetbridge	2015-05-12 11:06:22 +02:00
cpfeiffer	9a26769c3e	Search & replace: use slf4j for logging instead of Logcat directly ... For a start, use android-logger as backend. Needs a better configuration but no time right now. For file-logging we will use logback as slf4j-implementation.	2015-05-12 06:33:37 +02:00
Andreas Shimokawa	6fab01a3c2	Pebble: experimenting with more generic application message encoding	2015-05-11 23:30:38 +02:00
cpfeiffer	87512149a5	This should fix pebble-pairing on bt+btle devices #33	2015-05-11 00:50:18 +02:00
cpfeiffer	84d1e95767	Fix removal of async runnable to stop pairing after 60s (#3)	2015-05-10 23:14:32 +02:00
cpfeiffer	b25da80656	Stop discovery when attempting to pair #33	2015-05-10 21:35:31 +02:00
cpfeiffer	095ada8e5d	Attempt to improve Pebble bonding when bonding fails #33	2015-05-10 21:32:41 +02:00
cpfeiffer	be52724fdd	Also commit leftover	2015-05-10 21:19:24 +02:00
cpfeiffer	61e8d88de4	Rename constant	2015-05-10 21:13:05 +02:00
cpfeiffer	bd2d5fd608	Ensure that device list is refreshed when changing MAC address ... (the set-summary preference change listener overwrote our own listener)	2015-05-10 21:12:10 +02:00
Andreas Shimokawa	c8feea9f37	Refreshing device list when paired devices change now works. ... I was using LocalBroadcastManager.... :/	2015-05-10 17:05:24 +02:00
Andreas Shimokawa	0d77a5ac05	Try to refresh device list if BluetoothDevice.ACTION_BOND_STATE_CHANGED is received. ... On my Android 4.4 device, this does not work however (no Intents arrive)	2015-05-10 16:56:09 +02:00
Andreas Shimokawa	f101926186	Pebble: No pairing activity, just call createBond() and finish discovery activity	2015-05-10 16:27:31 +02:00
Andreas Shimokawa	a70426d84d	Display found Pebbles in DiscoveryActivity	2015-05-10 15:52:19 +02:00
Andreas Shimokawa	1443c8088c	Change default for Pebble Notification Intents back to "when screen off" ... Conversations accepted our PR, so we will continue to get these intents. The option cann still turned off, in that case Conversations' notifications are picked up by our generic notification support.	2015-05-10 15:07:28 +02:00
Andreas Shimokawa	7f5b495480	Move Mi Band MAC address setting to Mi Band Settings	2015-05-10 13:08:28 +02:00
Andreas Shimokawa	e78c912be3	Only sync time on time/timezone changes if appropriate option is set.	2015-05-10 11:21:16 +02:00
cpfeiffer	86119a877a	Slight refactoring, add some Logging	2015-05-10 00:18:42 +02:00
cpfeiffer	39d84831ed	Unset dynamic device state (like battery level, etc.) when disconnected	2015-05-10 00:05:29 +02:00
cpfeiffer	1a7c3c42e4	Do both BT and BTLE discovery (one after another) #33	2015-05-09 23:54:47 +02:00
cpfeiffer	60210e069c	Fix validity check with gender and type	2015-05-09 23:13:47 +02:00
Andreas Shimokawa	6f162c593b	Pebble message intent notifications default to "never" now ... If these get turned on, Conversations notifications will be handled through Pebble message intents and get filtered out from generic notifcation handling.	2015-05-08 12:50:42 +02:00
Andreas Shimokawa	c999c52501	convert sequence of ifs to switch	2015-05-08 11:18:06 +02:00
cpfeiffer	b2518ff927	Discovery + pairing now works ... User info is asked on demand before starting the actual pairing. When no (valid) user info is given, dummy user infor will be used instead.	2015-05-07 23:52:44 +02:00
Andreas Shimokawa	157deff237	Send current time to device if time/timezone changes. Closes #51.	2015-05-07 23:46:18 +02:00
cpfeiffer	1604ae2c22	#33 only start discovery activity when bt is enabled	2015-05-07 22:15:53 +02:00
cpfeiffer	a23690c8e1	Initial support for Mi Band specific settings ... (User info for now). TODO: We need to have that information *before* starting a connect	2015-05-07 01:32:17 +02:00
Andreas Shimokawa	8b75440867	Pebble: feed WeatherNeat with bogus data (testing) ... This is completely useless, but it is the first time I could successfully send data to a watchface.	2015-05-06 23:47:58 +02:00
cpfeiffer	0c039b8a46	Start discovery activity automatically when no devices available (#33)	2015-05-06 22:59:31 +02:00
cpfeiffer	0629d6aa5d	Small improvements to discovery, only scan for 1min #33	2015-05-06 22:59:00 +02:00
Andreas Shimokawa	33db0bf890	Pebble: handle DATALOG and PHONEVERSION endpoints directly in protocol ... This allows to remove all protocol inspection in PebbleIoThread	2015-05-06 11:43:01 +02:00
cpfeiffer	7b02548427	Clear task stack after discovery (#33)	2015-05-06 00:17:28 +02:00
cpfeiffer	50034e0bfe	Request battery info in initialize()	2015-05-05 23:25:54 +02:00
Andreas Shimokawa	3e85efa898	Display battery level if known. Should work on Miband, untested.	2015-05-05 22:52:25 +02:00
Andreas Shimokawa	9efcd8974d	Add GBDeviceCommandSendBytes for generic pre encoded commands that are meant to be send to a device directly ... This is useful for Debugging. We can now send answers to data from the Device directly int he procol implementation without messing with code in the GBDEviceIoThread's implementation. This commit also adds test code for interaction with WeatherNeat (so far nothing works though)	2015-05-05 14:41:10 +02:00
Andreas Shimokawa	d09b5442cf	Put FW/HW info inside its own TextView to cleanup the device list	2015-05-05 11:16:57 +02:00
cpfeiffer	cf12c78a64	Ensure that discovery doesn't display duplicates (#33)	2015-05-05 01:08:30 +02:00
cpfeiffer	9df661bd96	Initial (ugly) support for device discovery and pairing (#3)	2015-05-05 00:48:54 +02:00
Andreas Shimokawa	e859ece7c6	Add Support for notifications send to Pebble from 3rd party applications ... This enables support for Conversations without using generic notificaion support. Other applications could also work partly but are untested. This commit also changes the SettingsActivity to use Comboboxes instead of two Checkboxes for each notification source.	2015-05-04 01:03:56 +02:00
Andreas Shimokawa	93b463c47e	update German translation	2015-05-01 10:08:24 +02:00
cpfeiffer	3e79269d43	#46 add missing GBApplication	2015-05-01 09:36:33 +02:00
Andreas Shimokawa	f143c9ec54	androidstudio vs. eclipse :/	2015-05-01 01:49:43 +02:00
cpfeiffer	8b3b4d0882	#46 make all strings localizable	2015-05-01 01:26:30 +02:00
Andreas Shimokawa	75b9d0e833	simplyfy SettingsActiviy code	2015-05-01 00:56:16 +02:00
Andreas Shimokawa	e65c492792	Pebble: display progressbar during installation of apps/firmware	2015-04-29 00:21:02 +02:00
Andreas Shimokawa	01e96f9c8d	Pebble: Bugfix for beeing stuck while waiting for a slot, when none is available	2015-04-28 23:35:12 +02:00
Andreas Shimokawa	31b01d860f	Pebble: notification cleanups ... - remove notification update code from PebbleIoThread (is in generic code now) - use a separate notification for app/firmware installation	2015-04-28 21:59:53 +02:00
cpfeiffer	5a458611e2	Set the time during initialization. Necessary for steps tracking. ... Also see #31	2015-04-27 21:43:57 +02:00
cpfeiffer	8e25c03350	display connection state in notification area	2015-04-27 21:19:09 +02:00
Andreas Shimokawa	462f9f028f	Pebble: do not call setReceiversEnableState() from PebbleIoThread anymore, handling had been moved to generic code	2015-04-27 01:24:42 +02:00
Andreas Shimokawa	2eb62ebff3	Pebble: Speed up app/firmware installation by sending 2000 bytes at once instead of 512. Closes #22.	2015-04-27 01:15:03 +02:00
Andreas Shimokawa	c06ef3d260	Pebble: try to shut up datalog, which might cause battery drain on the watch	2015-04-26 01:43:24 +02:00
Andreas Shimokawa	613ff1fc91	Pebble: corrections to PebbleIoThreads, better logging	2015-04-26 00:54:41 +02:00
cpfeiffer	0377a751b0	be even more robust #35	2015-04-25 23:49:07 +02:00
cpfeiffer	1772076b62	Log service creation and destruction	2015-04-25 23:49:07 +02:00
Andreas Shimokawa	442ae6499a	Pebble: Better logging and hexdump for short packages to endpoint 6778	2015-04-25 23:13:22 +02:00
cpfeiffer	c773181da3	Request and display device info (connection state and firmware version) ... - request device info initially (connection state) - request device info (firmware) when connected This also fixes the wrong connection state being displayed on orientation change.	2015-04-24 23:09:35 +02:00
cpfeiffer	274e8591dc	Initialize the BTLE device after the services are discovered. ... This hopefully helps with the MI Band automatically disconnecting.	2015-04-24 22:21:35 +02:00
Daniele Gobbetti	98696ce9e2	Implement setting the time on the miband. ... It works from the debug activity, since I am not sure about the value of the ts argument, it always sets the current time.	2015-04-23 14:11:57 +02:00
cpfeiffer	cf681a089a	Add the device if it's not in the list yet.	2015-04-22 20:38:05 +02:00
cpfeiffer	1ff1c20056	Some more logging	2015-04-22 20:38:04 +02:00
Andreas Shimokawa	ab2f5a73a8	Quick fix for crash when connecting to a Miband with invalid address in settings.	2015-04-21 22:35:11 +02:00
cpfeiffer	06d8488792	#15 log as info, not error	2015-04-20 23:45:34 +02:00
Andreas Shimokawa	b391128a56	Merge branch 'master' of https://github.com/Freeyourgadget/Gadgetbridge	2015-04-20 23:39:02 +02:00
Andreas Shimokawa	661ed9c612	Pebble: When opening a firmware print for which HW revision it is.	2015-04-20 23:38:00 +02:00
cpfeiffer	1e3ba57b03	fix unpaired MI devices disappearing from view (#15)	2015-04-20 23:25:46 +02:00
cpfeiffer	f6208f1031	fix warning	2015-04-20 22:44:22 +02:00
Andreas Shimokawa	33d86de923	move external receivers to externalevents/ directory	2015-04-20 22:39:35 +02:00
cpfeiffer	93b18d0d0b	log when receivers are enabled/disabled	2015-04-20 22:04:14 +02:00
cpfeiffer	515c456605	#15 keep the broadcast receivers enabled when device uses autoconnect	2015-04-20 22:02:06 +02:00
cpfeiffer	4bdeabf4ea	set deviceSupport to null after disposing it	2015-04-20 21:45:52 +02:00
Andreas Shimokawa	5487dfd348	Pebble app installation: Only enable install button when device is connected, for firmware also check hardware revision	2015-04-20 20:49:14 +02:00
Andreas Shimokawa	412c771d59	fix crash	2015-04-20 20:48:52 +02:00
Andreas Shimokawa	a12a76313c	do not append Miband to device list if it has already been added as the connected device before	2015-04-20 19:32:12 +02:00
Andreas Shimokawa	16ea52e83c	add hardware revision string to GBDevice, get and display HW Revision from Pebble	2015-04-20 12:48:32 +02:00
Andreas Shimokawa	fbbc808ca8	Make GBDevice parcable to make passing it via Intents more convinient	2015-04-20 11:58:59 +02:00
Andreas Shimokawa	cd0139cd7c	add isConnecting() method to GBDevice	2015-04-20 10:50:30 +02:00
cpfeiffer	4a1a1d59be	battery info hooked in, dummy for pebble	2015-04-19 22:31:09 +02:00
cpfeiffer	686ed312d6	#15 properly return firmware version	2015-04-19 22:23:53 +02:00
cpfeiffer	2dcd95a1f5	#15 support for reading firmware version and battery info	2015-04-19 22:20:47 +02:00
cpfeiffer	28272714aa	remove whitespace	2015-04-19 21:50:01 +02:00
cpfeiffer	54784100b8	use isConnected() rather than getState() == CONNECTED ... because getState() == INITIALIZED implies CONNECTED	2015-04-19 15:56:32 +02:00
Andreas Shimokawa	95d656d345	reformat code with androidstudio :P	2015-04-19 15:27:16 +02:00
cpfeiffer	7b433f0d18	add state string for INITIALIZED	2015-04-19 15:21:15 +02:00
cpfeiffer	2b1157ca67	#15: notify on incoming calls	2015-04-19 15:15:53 +02:00
cpfeiffer	24c3903eef	#15 update device state to INITIALIZED when user info was sent	2015-04-19 15:11:50 +02:00
cpfeiffer	0e34a449ca	Register with the LocalBroadcastManager for device_changed ... Otherwise intents sent with LocalBroadcastManager won't ever arrive.	2015-04-19 15:11:03 +02:00
cpfeiffer	7b4c7926d3	Listen to device_changed in addition to refresh_device_list	2015-04-19 15:09:27 +02:00
cpfeiffer	88e2b7ff99	#15 automatically toggle the broadcast receiver using connectoin status ... Makes "real" notifications where for the MI Band, not just those from the debug activity.	2015-04-19 14:35:28 +02:00
Andreas Shimokawa	b74319fee9	Make list refresh automatically when Miband MAC was entered or removed. Update README.md	2015-04-19 12:35:23 +02:00
Andreas Shimokawa	dd12bb11b2	reformat code with androidstudio	2015-04-19 11:28:03 +02:00
cpfeiffer	09914e6da0	#15 Initial support for MI Band ... 1) The MAC address has to be added manually for now (Settings -> Debug) 2) Configure other notifications as desired 3) After doing that, restart Gadgetbridge, after that, the device should be visible. 4) Tap it to connect 5) Try the Debug activity via the Menu to send some dummy notifications => Your MI should vibrate and blink Also: add some extra files necessary to support Eclipse ADT. To be migrated to Andmore, later.	2015-04-19 02:37:29 +02:00
Andreas Shimokawa	7c60e4b595	Pebble: Firmware upgrade support	2015-04-17 12:23:19 +02:00
Andreas Shimokawa	90f2b4ded3	Pebble app installation: Use data (filenames, sizes and crc) from manifest.json (Fixes #16) ... Also remove STM32CRC.java, which had broken tail code, we use the crc from the manifest now.	2015-04-17 00:57:50 +02:00
Andreas Shimokawa	47fd1a7dff	move PebbleProtocol.java, update CHANGELOG.md	2015-04-15 00:06:42 +02:00
Andreas Shimokawa	7ad1bfbdb1	reformat code with androidstudio	2015-04-14 10:29:09 +02:00
cpfeiffer	dbb0d85165	Added missing dispose() method	2015-04-14 02:04:59 +02:00
cpfeiffer	d0ff14bc0e	Also move the resource management into DeviceSupport classes	2015-04-14 02:04:58 +02:00
cpfeiffer	1f31c1d79c	Next refactoring: the road to support BT and BT LE	2015-04-14 02:04:34 +02:00
Andreas Shimokawa	0cec658c3a	Implement volume control for Pebble ... I didn't know how to access this on the pebble until I did a long press on play/pause ;)	2015-04-13 22:25:23 +02:00
Andreas Shimokawa	40438ebe0e	Revert to previous state if connection fails, this fixes multiple bugs when pebble is reconnecting	2015-04-13 13:26:22 +02:00
Andreas Shimokawa	bb44cb1e19	reformat code with androidstudio	2015-04-13 11:22:03 +02:00
cpfeiffer	09bb5d4a3e	Refactoring: extracted inner GBDeviceIOThread classes to own files ... To enable this, extracted some shared functionality into new GB helper class.	2015-04-13 01:02:26 +02:00
Andreas Shimokawa	4a697edced	add icon for activity tracker type apps. Thanks xphnx!	2015-04-10 22:26:52 +02:00
Andreas Shimokawa	521dad8c14	Mention the original cpp source from which STM32CRC.java was ported.	2015-04-10 22:10:55 +02:00
Andreas Shimokawa	4ff57dfdab	Feedback for failed and successful installations. Closes #19.	2015-04-09 18:48:52 +02:00
Andreas Shimokawa	3355be79e6	Filter notifications from com.android.systemui. Should fix #20.	2015-04-08 22:11:56 +02:00
Andreas Shimokawa	90fe75e044	get free slot always before actually installing a pbw. fixes #17 and #18	2015-04-07 23:57:12 +02:00
Andreas Shimokawa	ebdf514c0e	Pebble app installation: first successful installation :) ... KNOWN PROBLEMS - expected filenames inside pbw files are hardcoded (pebble-app.bin etc) - long delay before installation starts - must be in app mananger at least once before installation in possible - errors while installing are not always recognized	2015-04-07 19:33:23 +02:00
Andreas Shimokawa	3498ddfc7a	Pebble: progress with app installtion (CRC, complete install of pebble-app.bin) ... This is still not working and WIP. TODO: - install resources - install workers	2015-04-06 23:37:17 +02:00
Andreas Shimokawa	2c1cacedb3	Pebble: working on app installation (WIP, do not use)	2015-04-06 20:58:35 +02:00
Andreas Shimokawa	1766c82ab8	In NotificationListener return early if BluetoothCommunicationService is not running ... This is to pervent our service from being started when we get a notification even if Gadgetbridge is not in use and no devices are connected. Unfortunately we cannot enable/disable NotificationListener at runtime like we do with broadcast receivers because it seems to invalidate the permissions that are neccessery for NotificationListenerService	2015-04-04 23:20:28 +02:00
Andreas Shimokawa	74f2b8c1c2	fix crash on some devices when creating a test notification in debug menu	2015-04-03 22:39:25 +02:00
Andreas Shimokawa	45631fb14b	workaround for missing Miband pairing (assume Miband when device name is not set)	2015-04-01 23:15:08 +02:00
Andreas Shimokawa	13d734b0f1	add development option to set a miband device address so it appears in our list. ... This is only meant for future development, there is no MI Band support yet!	2015-04-01 23:00:05 +02:00
Andreas Shimokawa	2c50f95a92	update Pebble icon, add Miband icon	2015-04-01 22:12:49 +02:00
Andreas Shimokawa	71c201beaf	add GBDeviceIoThread class for further device abstraction ... Also add an empty implementation for the Miband. Now Gadgedbridges pebbleisms should be removed.	2015-04-01 19:11:18 +02:00
Andreas Shimokawa	ed2e177fcb	Remove direct PebbleProtocol usage. Add GBDeviceProtocol as a base class for all protocols. ... Also add a empty MibandProtocol	2015-04-01 18:34:52 +02:00
Andreas Shimokawa	9d74cee093	add icons for pebble and watchfaces. Store app type in GBDeviceApp. Store device type in GBDevice.	2015-03-31 23:34:19 +02:00
Andreas Shimokawa	2b31d4b359	fix refresh of device list when bluetooth gets turned on	2015-03-29 23:43:05 +02:00
Andreas Shimokawa	d9a2d85f6d	Fix for DST (summer time), option to sync time on connect (enabled by default)	2015-03-29 17:12:06 +02:00
Andreas Shimokawa	4117444c26	Display app name, company and version when opening a .pbw file from a filemanager	2015-03-28 23:23:10 +01:00
Andreas Shimokawa	d4ff94da4a	Back button for SettingsAvtivity. Remove tablet specific code.	2015-03-28 20:39:46 +01:00
Andreas Shimokawa	b3251a33f2	show hint at the bottom of the Main Activity, update README.md, bump to 0.1.4	2015-03-27 12:33:51 +01:00
Andreas Shimokawa	0dacc1f9c7	make sure Intent broadcasts do not leave Gadgetbridge, add missing xml file	2015-03-27 12:13:19 +01:00
Andreas Shimokawa	b20aaf59a8	enable back navigaton in AppManager and Debug activitys ActionBar	2015-03-27 11:23:30 +01:00
Andreas Shimokawa	6ec1fa9e23	use LocalBroadcastManager	2015-03-27 10:56:08 +01:00
Andreas Shimokawa	42e53c3c8d	support removing apps/watchfaces	2015-03-26 18:11:47 +01:00
Andreas Shimokawa	67a5917597	Change the way how device commands or replys to information requests are passed back to the App ... This was necessary to pack more complex and more specific information regarding apps etc.	2015-03-26 12:06:26 +01:00
Andreas Shimokawa	0ccb818f58	Added AppManager, does not do anything useful yet. Only lists installed Apps.	2015-03-25 22:23:45 +01:00
Andreas Shimokawa	2e7f45433a	display connection status in the device list	2015-03-22 23:38:51 +01:00
Andreas Shimokawa	ecb7a9f3b5	Remove quit button from the service notification, put a quit item in the context menu instead. Closes #12	2015-03-22 13:10:45 +01:00
Andreas Shimokawa	79c7085264	refresh list of paried devices when bluetooth gets turned on	2015-03-22 12:46:28 +01:00
Andreas Shimokawa	05c07aa611	Get and display Pebble firmware version when connected.	2015-03-22 00:34:54 +01:00
Andreas Shimokawa	4e465928e6	List all suported devices and connect on tap. Remove the connect button.	2015-03-21 18:18:07 +01:00
Andreas Shimokawa	a746ed4a2b	reconnect support. Closes #10	2015-03-18 12:29:10 +01:00
Andreas Shimokawa	d1ea1b9915	quit Gadgetbridge when bluetooth gets turned off	2015-03-17 22:03:54 +01:00
Andreas Shimokawa	a971eca6fd	preparations for acceppting calls	2015-03-17 21:42:31 +01:00
Andreas Shimokawa	c56194c0e5	* Add option to start Gadgetbridge and connect automatically when bluetooth is turned on. ... This closes #9	2015-03-17 21:41:58 +01:00
Andreas Shimokawa	2260d60bac	K-9 Mail notifications: Hopefully fix #7 and #8 ... K-9 Mail seems to completely ignore the where clause when querying for messages. That is why we got data from the newest message instead of the one requested. Work around by walking through the messages and match the uri manually. This is not as expensive as I thought because in most cases it is the first message is the one we want anyway.	2015-03-16 16:18:11 +01:00
Andreas Shimokawa	eeb74b4c61	Preferences: "Generic Notification Support" is no longer a checkbox - it now opens the Android Notificaion Permission Dialog ... If the permission is not granted we wont get notfifications, an extra preference for Gadgetbridge is pointless, so I removed it.	2015-03-15 21:36:39 +01:00
Andreas Shimokawa	326e079068	fix crash when no Pebble was paired, change version to 0.1.0, build tweaks	2015-03-11 12:40:59 +01:00
Andreas Shimokawa	6fa99082ab	Support for rejecting/ending calls via Pebble buttons	2015-03-07 17:44:39 +01:00
Andreas Shimokawa	85ccafc922	Experiment with styling.	2015-03-07 15:32:34 +01:00
Andreas Shimokawa	4e7553836b	Workaround for non-working outgoing call display. Fixes #6. ... This is still a bit ugly because we cannot (yet?) detect whether remote has taken the call or not. So we will start counting in-call time from the moment we start dialling.	2015-03-07 14:40:59 +01:00
Andreas Shimokawa	e52e26168a	quick&dirty preference screen. Allows to enable/disable SMS/K9/generic notifications	2015-03-06 14:00:56 +01:00
Andreas Shimokawa	bc40f41eab	Do not send notifications out notification when screen is on. Also filter out "ongoing" notifications	2015-03-04 23:47:47 +01:00
Andreas Shimokawa	e0c146bde9	add notification icon. This fixes #2	2015-02-24 12:36:38 +01:00
Andreas Shimokawa	df8c290442	Implement music control (play, pause, next, previous). Try to make code a bit less Pebble centric.	2015-02-12 16:00:45 +01:00
Andreas Shimokawa	20b3dffba6	initial support for music playback information (artist, album, track), fix encoding of empty strings in PebbleProtocol	2015-02-08 23:53:40 +01:00
Andreas Shimokawa	efa7920b9d	do not disable/enable NotificationListener at runtime (leads to loss of permissions to read notifications)	2015-02-07 13:20:38 +01:00
Andreas Shimokawa	a47ba3c96f	Cleanup main Activity, move debug code to DebugActivity, added Call related debug buttons, add state tracking to PhoneCallReceiver, support in-call display of incoming calls (untested)	2015-02-07 12:58:18 +01:00
Andreas Shimokawa	d80e98d26a	fix encoding of pebble version command, stops pebble from rerequsting our version over and over	2015-02-06 23:28:24 +01:00
Andreas Shimokawa	243b9f0a88	Various changes to Service, Activity and Notification handling ... - Bluetooth connection is now established in BtSocketIOThread - Service is now started as soon as the main activity is started - changed "start service" button to "connect" button - quit button in service notification now also quits the main activity - Service notification now displays "Gadgetbride started", "connected to Pebble XXXXX" and "not connected" depending on connection state	2015-02-06 13:55:44 +01:00
Andreas Shimokawa	ab233279e1	enable/disable BroadcastReceivers via PackageManager when Socket is connected/disconnected ... This does not work with NotificationListener unfortunately.	2015-02-02 21:16:42 +01:00
Andreas Shimokawa	24c9b5b400	quit BtSocketIoThred when socket has been closed by remote, remove dead "passive mode" code	2015-02-01 00:34:12 +01:00
Andreas Shimokawa	c0bfe2f715	make quit button work by letting BtSocketIoThread actually leave its main loop, do not display "Unknown" for unknown numbers but the number itself.	2015-01-31 11:49:46 +01:00
Andreas Shimokawa	8e69723931	Added quit button to Service notification, removed unneccessary ACTION_STOP form Service	2015-01-30 11:59:36 +01:00
Andreas Shimokawa	2880e4dac9	Native support for K-9 Mail, bugfixes for generic notifications	2015-01-26 18:52:19 +01:00
Andreas Shimokawa	94c73ef20e	Receive SMS the proper way, filter them out in the generic NotificationListener.	2015-01-24 12:21:15 +01:00
Andreas Shimokawa	070c6db5ed	Resolve caller names by phone number before sending to Pebble	2015-01-23 11:32:58 +01:00
Andreas Shimokawa	bf6abe9672	Quick and dirty support for incoming calls notification the Pebble way ... Incoming calls are no longer send as simple notifications but properly as incoming calls. The Pebble will vibrate until the call is taken or dismissed. It is not yet possible to dismiss the call using the Pebble button.	2015-01-22 22:49:50 +01:00
Andreas Shimokawa	59c281c61c	Reply to Pebbles version requests	2015-01-20 23:51:55 +01:00
Andreas Shimokawa	fcaf099e70	fix various annoyances ... - only ask for notication monitoring permissions the on first start - filter out annoying system messages like keyboard notifications - rearrange buttons - bugfix for message being ignored when sending a test message to the Pebble (sender was used as message content)	2015-01-18 22:44:38 +01:00
Andreas Shimokawa	88bb645834	Add ACTION_SETTIME to Service and add a corresponding button in the ControlCenter activity	2015-01-18 01:10:44 +01:00
Andreas Shimokawa	85fcdb208a	Put Bluetooth communication into a foreground service and keep socket open.	2015-01-12 00:35:15 +01:00
Andreas Shimokawa	cc2b224a71	Do dot reuse BluetoothDevice, remember BT address instead and lookup the corresponding BluetoothDevice every time ... This fixes problems after sleep with bluez on Android.	2015-01-09 13:45:47 +01:00
Andreas Shimokawa	dada70e92c	First checkin of actual code	2015-01-07 14:00:18 +01:00