Mostly copied from the Buds Pro as those earbuds have a similar feature set and mostly the same protocol.
Working:
- Pairing
- Earbud and case battery level
- Finding lost device
- Settings:
- Noise control:
- ANC/ambient/off
- With one earbud
- Voice detect and timeouts
- Ambient sound during calls
- Touch options:
- Touch lock
- Switch noise control, voice assistant, Spotify and volume actions
- Double tap edge
- Equalizer
- Sound balance
- Seamless earbud connection
Can be improved:
- ~~ANC level and ambient sound volume do nothing, and don't seem to be supported on this model as there is no toggle for either in the official app.~~ (fixed: 26a9d274ae)
- Ambient sound customization has more options than on previous models, but I can't implement it properly as I can't really hear any difference between the options (my buds might be the issue though).
- ~~The touch lock toggle is once again inverted, like on the [Buds2](d2c4990c48)~~ (fixed: 21db5390c1).
Untested:
- Settings:
- In-ear detection for calls
- Ambient sound customization
- Game mode
This PR also makes some visual changes to the settings of various Galaxy Buds models.
I'd also like to be added to the wiki's allow list. I want to add the Buds2 and Buds2 Pro to the list of supported devices.
---
And sorry for creating this many pull requests. This is mostly due to Codeberg breaking the reference to the branch.
Co-authored-by: Narek <narek.email@gmail.com>
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/3049
Reviewed-by: José Rebelo <joserebelo@noreply.codeberg.org>
Reviewed-by: Andreas Shimokawa <ashimokawa@noreply.codeberg.org>
Co-authored-by: narektor <narektor@noreply.codeberg.org>
Co-committed-by: narektor <narektor@noreply.codeberg.org>
Mostly copied from the Buds Pro as those earbuds have a similar feature set and mostly the same protocol.
Co-authored-by: narektor <narektor@noreply.codeberg.org>
Co-committed-by: narektor <narektor@noreply.codeberg.org>
- use encryption to create data rather then replay captured BLE traffic
- use periodical data sender, as is required by the BLE module
- extract string resources
- adds initial device support
- can control driving forward/back/left/right
- probably could be implemented further:
- battery reading
- device name?
- lights on
- fast/slow speed mode
Add support for (explicit) service intents.
Add support for setting flags for intents.
Add support for setting multiple categories for intents.
Add ability for Gadgetbridge to wake the Android device and leave the
lock screen to start activities when it is sleeping. A new activity
'WakeActivity' is used for this. (Must use 'trusted device' in Android)
Add dismiss-button to 'display over other apps' permission pop up.
Bangle.js can send "gadgetbridge" as package info to accomodate the
different GB build variants/flavours.
Use only getContext() and not getApplicationContext() when executing
the intents.
Add basic initial support for the Amazfit GTS 3 based on Xiaomi Smart Band 7 support.
What was already tested (other features might work too):
**Implemented features**
Connection
Reconnect after Airplane mode
Set time
Notifications
Send to band
Delete notifications on phone/band when deleted on the other
Calls
Custom notification icons
Handle + ack notification replies from band
Music (with youtube music)
Music Info
Volume
Music buttons
Find Phone from band / stop on band when stopped on phone
Battery Info (request, parse)
Flash Watchface
Night mode (mode, schedule)
Lift wrist (mode, schedule, sensitivity)
(Not) working features might be similar to Miband 7.
Tested on
FW: 7.42.5.1
HW: 0.76.17.4
Co-authored-by: Andreas Sedlmayer <sedlmayer.andreas89@gmail.com>
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2871
Co-authored-by: sedy89 <sedy89@noreply.codeberg.org>
Co-committed-by: sedy89 <sedy89@noreply.codeberg.org>
This PR adds support for the flipper zero device.
It's main purpose currently is to provide an Intent-based API to Tasker and similar apps to play sub-GHz files.
In the future, file management and other features might be useful.
Co-authored-by: Daniel Dakhno <dakhnod@gmail.com>
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2840
Co-authored-by: dakhnod <dakhnod@noreply.codeberg.org>
Co-committed-by: dakhnod <dakhnod@noreply.codeberg.org>
...to allow intents to start activities on the android device.
Add pop-up asking for permission to "Display over other apps"
Add info for intents on Bangle.js
Add message to display on "Display over other apps" permission pop-up
Move permission to display over other apps to main build variant/flavor.
fix getting permission for display over other apps.
Clarify that permission to display over other apps is mainly for Bangle.js.
If logging initialization failed, the file logger would not be removed
correctly, and it would log to a GB_LOGFILES_DIR_IS_UNDEFINED directory.
Remove the file logger from the root appender, regardless of it being
null or not.
The issue can be easily reproduced before the fix by throwing an
exception in FileUtils#getExternalFilesDir. Before the fix, it would
still log to the aforementioned directory.
Aditionally, update the Settings screen to reflect that writing log
files is not available in such cases.
- open app preferences screen from device card menu
- open auth preferences screen from DiscoveryActivity
- add explanation about Auth key, make it open wiki link, fix#2240
- add New protocol checkbox and explanation when first pairing Miband 6
this PR aims to add device for multiple connected devices at once.
A lot of stuff already works, some things need to be done:
- [x] change DeviceCommunicationService to hold multiple devices and supports
- [x] implement connect / disconnect logic
- [x] widgets, not really suited for multiple devices, so far
- [x] change the notification to show multiple devices
- [ ] change GBDeviceService#onFindDevice and similar API functions to target individual devices, not all connected.
- [x] move auto-reconnect setting to device settings
- [x] fix music event crash
- [x] work out behaviour when pressing "connect" from notification
- [ ] handle service crashes
- [ ] suit coordinator methods for multiple devices of same kind
- [x] change ACL_CONNECTED receiver to connect to devices that are not currently registered in DeviceCommunicationService
- [ ] adjust after-boot auto-connection logic
- [ ] fix hanging device support. Device says disconnected, GB says connected
- [x] firmware updater doesn't work
My attempt to make onFindDevice work was to change the arguments to ```EventHandler#onFindDevice(GBDevice device, boolean start)```.
The Problem is that this forces the device-specific implementations to also accept GBDevice as an argument.
Co-authored-by: Daniel Dakhno <dakhnod@gmail.com>
Co-authored-by: Andreas Shimokawa <shimokawa@fsfe.org>
Co-authored-by: dakhnod <dakhnod@gmail.com>
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2526
Co-authored-by: dakhnod <dakhnod@noreply.codeberg.org>
Co-committed-by: dakhnod <dakhnod@noreply.codeberg.org>
This PR adds support for a new custom menu system on the Fossil Hybrid HR, developed by @dakhnod. For regular users this PR will change nothing, apart from also giving an extra option to light up the display when receiving new notifications.
For more advanced users, there's the [Fossil HR Menu Companion app](https://github.com/dakhnod/Fossil-HR-Menu-Companion) that's needed to enable and configure the new menu system. Just disable one or more of the physical buttons in Gadgetbridge and configure them instead in the companion app to get started.
Co-authored-by: Daniel Dakhno <dakhnod@gmail.com>
Co-authored-by: Arjan Schrijver <a_gadgetbridge@anymore.nl>
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2616
- Add more info about AutoExport into DataManagement activity
- Fix scheduleAlarm name
- Run AutoExporter in another thread
- Start AutoExporter on app startup if not running yet from AutoStartReceiver
- Save and show time of scheduled and last executed AutoExport
- Fitness App Tracking Start already works, Stop is commented out for
time being
- Catch exception in case the package name for controlled app doesn't
exist/work
This really seems to be the same device, but it does have a different firmware
and a different bluetooth name.
Do this to prevent cross flashing - which might actually be okay but we do not know.
This PR adds the ability to change activity recognition settings on the watch.
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2539
Co-authored-by: dakhnod <dakhnod@noreply.codeberg.org>
Co-committed-by: dakhnod <dakhnod@noreply.codeberg.org>
New Huami Amazfit GTS 2 Mini activity for Outdoor Trekking/Hiking.
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2528
Co-authored-by: Sebastian Krey <skrey@noreply.codeberg.org>
Co-committed-by: Sebastian Krey <skrey@noreply.codeberg.org>
Adds Support for BLDC controller VESC connected to a BLE serial device like an HM10.
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2491
Co-authored-by: dakhnod <dakhnod@noreply.codeberg.org>
Co-committed-by: dakhnod <dakhnod@noreply.codeberg.org>
This PR adds not only the device Bose QC35,
it also adds the following autop-reconnect feature:
When the headphones are turned on, the initiate a connection with the phone.
With this change, GB is notified about said change, and tries to establish a connection to the newly connected device, if the appropriate device setting is set.
The QC35 headpones always have NC turned on after boot, thus the main feature of this implementation is to turn off NC as soon as the headphones are turned on and connected to the phone.
I am open for discussion regarding the implementation, but this seems like a good first proposal.
What is missing is the ability to connect to multiple devices, since in many cases headphones can be connected to the watch simultaniously to a smartwatch or other gadget.
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2520
Co-authored-by: dakhnod <dakhnod@noreply.codeberg.org>
Co-committed-by: dakhnod <dakhnod@noreply.codeberg.org>
This PR aims to add the on-device connection confirmation for the Fossil HR.
This seems mandatory, since, at least on my watch, without said confirmation certain files like the configuration cannot be accesses, e.g. the time on the watch cannot be set etc.
The mystery yet to be solved is how to get the watch to not ask for a confirmation on every new connection or reconnection attempt, since that can get very annoying.
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2451
Co-authored-by: dakhnod <dakhnod@noreply.codeberg.org>
Co-committed-by: dakhnod <dakhnod@noreply.codeberg.org>
- this tries to address a common request to display user data up front
- i would make this via a fragment, but RecyclerView doesn't like Fragments
- (fragments would make it much easier to also add a charts like view,
like we use on the Activity list tab)
- i added configuration that allows to disable it partially or fully
Co-authored-by: Petr Vaněk <vanous@noreply.codeberg.org>
Co-committed-by: Petr Vaněk <vanous@noreply.codeberg.org>
