This PR adds support for the flipper zero device.
It's main purpose currently is to provide an Intent-based API to Tasker and similar apps to play sub-GHz files.
In the future, file management and other features might be useful.
Co-authored-by: Daniel Dakhno <dakhnod@gmail.com>
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2840
Co-authored-by: dakhnod <dakhnod@noreply.codeberg.org>
Co-committed-by: dakhnod <dakhnod@noreply.codeberg.org>
This PR aims to add support for the newer Fossil Gen. 6 Hybrid models, which are pretty similar to the older HR's.
Here's my checklist
- [x] make GB recognize and accept new watches
- [ ] find out how SPO2 is transmitted
- [ ] extend activity data to include Oxygen data
- [x] create timeout for requests to avoid deadlocks
- [x] fix device vibration on every reconnect
- [ ] create API for voice commands
- [x] figure out how the voice data works
Co-authored-by: Daniel Dakhno <dakhnod@gmail.com>
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2775
Co-authored-by: dakhnod <dakhnod@noreply.codeberg.org>
Co-committed-by: dakhnod <dakhnod@noreply.codeberg.org>
...to allow intents to start activities on the android device.
Add pop-up asking for permission to "Display over other apps"
Add info for intents on Bangle.js
Add message to display on "Display over other apps" permission pop-up
Move permission to display over other apps to main build variant/flavor.
fix getting permission for display over other apps.
Clarify that permission to display over other apps is mainly for Bangle.js.
try to deal with possible outstanding steps count synced on the first sync of the day (those may spoil the whole day activity);
take into account timezone diffs between local time and UTC for check steps of a day;
add some extra logging to help investigate possible issues reported by users
inform GB about new activity samples immediately after the sync (solves "lazy" refresh of the device card)
1) The AutoConnectIntervalReceiver was completely disabled when a device went into WAITING_FOR_RECONNECT state
2) The logic inside AutoConnectIntervalReceiver was broken, so that a timer never got started
The notification, once enabled, can only be triggerd once per day, mind that when testing.
Packet structure:
```
00:c2:00:3a:01:00:00:00:01:88:13:00:00
00:c2:00: - chunked transfer type 2
3a: - command set goals/notificatrions
01: - 01 - set steps goal, 02 - set calories goal, 03 - both
00:00:00: - delimiter
01: - enable steps goal notification
88:13: - set steps goal (5000)
00:00 - delimiter
```
This is sent when goal notification switch is enabled in Zepp app:
```
00:c2:00:3a:03:00:00:00:01:40:1f:00:00:01:2c:01:00:00
00:c2:00: - chunked transfer type 2
3a: - command set goals/notificatrions
03: - 01 - set steps goal, 02 - set calories goal, 03 - both
00:00:00: - delimiter
01: - enable steps goal notification
40:1f: - steps goal (8000)
00:00: - delimiter
01: - enable calories goal notification (seems to be not used in Neo)
2c:01: - set calories goal (300)
00:00 - delimiter
```
And when disabled:
`00:c2:00:3a:03:00:00:00:00:40:1f:00:00:00:2c:01:00:00`
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2780
Co-authored-by: NekoBox <nekobox@noreply.codeberg.org>
Co-committed-by: NekoBox <nekobox@noreply.codeberg.org>
Also implemented a `force_calendar_sync` command for the pebble-like
implementation to cope with out of sync databases (calling the receiver
doesn't work as of now)
this PR aims to add device for multiple connected devices at once.
A lot of stuff already works, some things need to be done:
- [x] change DeviceCommunicationService to hold multiple devices and supports
- [x] implement connect / disconnect logic
- [x] widgets, not really suited for multiple devices, so far
- [x] change the notification to show multiple devices
- [ ] change GBDeviceService#onFindDevice and similar API functions to target individual devices, not all connected.
- [x] move auto-reconnect setting to device settings
- [x] fix music event crash
- [x] work out behaviour when pressing "connect" from notification
- [ ] handle service crashes
- [ ] suit coordinator methods for multiple devices of same kind
- [x] change ACL_CONNECTED receiver to connect to devices that are not currently registered in DeviceCommunicationService
- [ ] adjust after-boot auto-connection logic
- [ ] fix hanging device support. Device says disconnected, GB says connected
- [x] firmware updater doesn't work
My attempt to make onFindDevice work was to change the arguments to ```EventHandler#onFindDevice(GBDevice device, boolean start)```.
The Problem is that this forces the device-specific implementations to also accept GBDevice as an argument.
Co-authored-by: Daniel Dakhno <dakhnod@gmail.com>
Co-authored-by: Andreas Shimokawa <shimokawa@fsfe.org>
Co-authored-by: dakhnod <dakhnod@gmail.com>
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2526
Co-authored-by: dakhnod <dakhnod@noreply.codeberg.org>
Co-committed-by: dakhnod <dakhnod@noreply.codeberg.org>
added an optional id to identify the request.
if a request with id occurs, a response with the same id is returned.
Co-authored-by: Rarder44 <lpozzi44@gmail.com>
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2683
Co-authored-by: rarder44 <rarder44@noreply.codeberg.org>
Co-committed-by: rarder44 <rarder44@noreply.codeberg.org>
This PR adds build flavors to `build.gradle`. The default is called `main`, but we also add `banglejs` which allows the building of an app called `Bangle.js Gadgetbridge`.
This will have internet connectivity, allowing Bangle.js watches to request data directly from the internet - and it's named so as hopefully not to be confused with the normal offline Gadgetbridge, while still giving credit.
Eventually the plan is to put this on the Google Play store, and to have additions in it which are good for Bangle.js users but would otherwise negatively impact normal Gadgetbridge users (a build flavor is used so we can keep the same codebase and not fork).
About naming - I'd mentioned `Gadgetbridge for Bangle` to @ashimokawa but thinking about how it would appear in the app store and Android apps list, it probably makes sense to call it `Bangle.js Gadgetbridge` so it's listed under `B...`. Happy to change or use something else if you have strong opinions though.
**Note:** adding build flavors seems to add the flavor name to existing builds. As a result, *all other builds will now have `main` in the name*. Unfortunately I didn't see another way around this, but hopefully it won't break anything.
Co-authored-by: Gordon Williams <gw@pur3.co.uk>
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2621
Co-authored-by: gfwilliams <gfwilliams@noreply.codeberg.org>
Co-committed-by: gfwilliams <gfwilliams@noreply.codeberg.org>
