Andreas Shimokawa
34ad088b88
Pebble: Experimental support for BLE on all models via dev option in Pebble Settings
...
HOWTO:
1) Pair you normal Pebble (not necessary if already done), make sure it was connected once
2) Unpair your LE pebble if already paired
3) Switch on "Always prefer BLE" in Pebble Settings
4) Tap on the + in Control Center to add a new device
5) Pair your Pebble-LE XXXX or Pebble Time LE XXXX inside Gadgetbridge's Device Discovery actibity
Now Gadgetbridge will connect to your LE Pebble when tapping on Pebble XXXX if "Always Prefer BLE" option is enabled.
You can easily switch back to classic LE by turning that option off again
2016-11-27 09:49:28 +01:00
cpfeiffer
2f7eb9ef23
Some more improvements to discovery
...
- pass service uuids to GBDeviceCandaidate so that DeviceCoordinators
can detect devices by their services.
Note: they should not rely on service uuids being available
2016-11-27 02:46:07 +01:00
cpfeiffer
b9ff2cd468
A few improvements to discovery
...
- display the right icon for found device candidates
- scan for specific LE services
2016-11-27 01:09:20 +01:00
Gilles Émilien MOREL
c84003c1c0
Allumer instead of Alumer
2016-11-25 19:37:21 +01:00
Andreas Shimokawa
b2e86ca061
fix xml in changelog
2016-11-25 14:55:30 +01:00
Andreas Shimokawa
352fc1a030
fix wrong return value
2016-11-25 14:53:12 +01:00
Andreas Shimokawa
6106dda2a3
bump version, update changelog
2016-11-25 14:31:56 +01:00
Andreas Shimokawa
a5263141d7
Pebble 2: Ignore all GATT communication with all other that the current device
...
Fixes a bad bug where disconnecting from another BLE device caused the Pebble2 to disconnect
2016-11-25 14:28:04 +01:00
cpfeiffer
2d4645f6cc
Fix only the first day label being displayed in Week Steps charts
2016-11-24 23:35:10 +01:00
Andreas Shimokawa
79eb4f32df
update Japanese and Spanish from transifex (thanks!)
2016-11-24 22:44:18 +01:00
Andreas Shimokawa
84caf22479
fix weekly charts to start y axis at 0
2016-11-24 22:27:44 +01:00
cpfeiffer
7da328d5db
Fix an invalid leftover check for array length
...
Also removed a method invocation that did not belong there.
2016-11-24 22:16:04 +01:00
Andreas Shimokawa
df4293108a
update changelog (again)
2016-11-24 22:11:59 +01:00
Andreas Shimokawa
9d083e2330
Pebble: add Kickstart Watchface to app manager on FW 4.X
...
I know it only exist on 4.3+, but I am lazy
2016-11-24 22:10:32 +01:00
cpfeiffer
02e6ce02b2
Add to 0.14.1 changelog
2016-11-24 22:03:02 +01:00
cpfeiffer
3fdfb7d172
Mi2: Support for setting the fitness goal (steps)
2016-11-24 21:58:32 +01:00
cpfeiffer
9bebf1d32f
When memory is really low, free up some memory #436
...
(although we probably can't save much)
2016-11-24 21:15:27 +01:00
cpfeiffer
60cb67c3c8
Some cleanup
2016-11-24 21:15:27 +01:00
cpfeiffer
cc0fbff297
Set the sample provider in getLatestActivitySample()
2016-11-24 21:15:27 +01:00
Andreas Shimokawa
6520b46238
bump version, update changelogs
2016-11-24 19:01:15 +01:00
Andreas Shimokawa
381323011e
Pebble 2: work around FW installation problems
...
Wait a 0.5s after each complete Pebble packet and do not longer wait at all after a completed GATT package chunk (was 0.1s)
Big outgoing messages will be now much faster such as firmware installations but smaller take more time than before.
(This is not the proper fix but I could update the firmware this way, failed 10 times before after a few percent)
2016-11-24 18:52:58 +01:00
Daniele Gobbetti
5b804effa4
Pebble: use a proper event handling in the configuration JS
...
This allows more advanced configuration pages to work properly. The problematic config pages emerged while fixing #431
2016-11-24 18:03:47 +01:00
Gilles MOREL
a5a5e66c62
French translation.
...
Changed and added several French messages.
2016-11-24 17:06:43 +01:00
cpfeiffer
67d89ce1b9
Create the correct start-sync timestamp #323
2016-11-22 22:52:26 +01:00
cpfeiffer
dfbaba4cb6
Make sure that the charts display the requested time range
...
(instead of only the range with available samples)
2016-11-22 15:53:58 +01:00
cpfeiffer
8d6888a13a
Remove "(next)" from 0.14.0
2016-11-22 14:43:07 +01:00
cpfeiffer
a8a7d8db31
Mi2: WIP synchronize only new data since last sync
...
(#323 )
2016-11-22 00:05:41 +01:00
cpfeiffer
0c51f86afc
Mi2: more work on activity data #323
2016-11-22 00:05:41 +01:00
cpfeiffer
82cd06f4c1
Mi2: WIP: initial support for activity data
...
(#323 )
2016-11-22 00:05:41 +01:00
cpfeiffer
dbe96582a7
Changelog for 0.14.0
2016-11-22 00:04:12 +01:00
Andreas Shimokawa
4ed7906a9e
update README regarding Pebble 2
2016-11-21 17:56:29 +01:00
Andreas Shimokawa
9dd61031f0
update Japanese from transifex. THANKS!
2016-11-21 17:46:11 +01:00
Andreas Shimokawa
8cb2030478
update changelogs (mi2 missing)
2016-11-21 17:44:43 +01:00
Andreas Shimokawa
eb052cead3
Pebble 2: Also honor the mtu when client gets a change reported
...
Should help older LE Pebbles
2016-11-21 17:29:16 +01:00
Andreas Shimokawa
647b67cfca
Pebble 2: call both requestMTU and use the characteristic write
2016-11-21 15:17:03 +01:00
Andreas Shimokawa
fce86482b9
Pebble 2: try an alternative way of setting the MTU (might revert)
2016-11-21 14:54:01 +01:00
Andreas Shimokawa
e8da301da3
Pebble 2: fix a few crashes with disconnect/ reconnect
2016-11-20 22:04:49 +01:00
Andreas Shimokawa
4f3c46f704
Pebble 2: only add second service if first one was added sucessfully
2016-11-20 00:12:41 +01:00
Andreas Shimokawa
3b250a4568
Pebble 2: initial hacky reconnect support
...
Works sometimes, at least less crashes
(#432 )
2016-11-19 23:53:07 +01:00
Andreas Shimokawa
c95587c915
remove _le suffix where not appropriate
2016-11-19 22:45:42 +01:00
Andreas Shimokawa
029cc02a29
Pebble: Add Pebble specific pairing activity mainly useful for Pebble 2 since it properly pairs the Pebble after connecting with BLE
...
Fixes #433
2016-11-19 22:13:00 +01:00
Andreas Shimokawa
ddfab1cdae
Pebble 2: use requestMTU() on Android 5+ instead of characteristics write.
...
This actually fixes MTU problems with older Pebbles (Time, OG)
2016-11-18 23:47:48 +01:00
Andreas Shimokawa
4dc085de57
Pebble 2: React to MTU notifications, fixes LE for older pebbles also
...
It seems that setting the MTU on older pebbles does not work, so just use what we can use.
Maybe old pebbles need setMTU() which only works on Android 5+, we could use that conditionally...
2016-11-18 23:47:48 +01:00
cpfeiffer
51fa31aa66
Fix BLE type conversions problems
2016-11-18 23:36:22 +01:00
Andreas Shimokawa
66e3de9168
Pebble 2: improve connection problems (at least for me)
2016-11-18 22:38:39 +01:00
cpfeiffer
96a16245df
Update to MPAndroidChart 3.0.1
2016-11-18 21:31:55 +01:00
Daniele Gobbetti
42901a295d
Pebble: pretend the clay-settings key is always present (but empty per default) in the localStorage
2016-11-18 12:33:12 +01:00
Andreas Shimokawa
d41848014b
fix database schema migration from 13 to 14
2016-11-16 11:37:36 +01:00
Andreas Shimokawa
485cda52a8
Pebble 2: actually report HRM feature to Charts Activity
2016-11-15 23:41:35 +01:00
Andreas Shimokawa
d7256d172e
I hate java
2016-11-15 23:23:21 +01:00
