Steffen Liebergeld
e386d6da43
Add onSetMusicState(MusicStateSpec stateSpec)
...
This commit contains the infrastructure needed for the
NotificationHandler to send music state information to the device. That
is, it introduces a call onSetMusicState(MusicStateSpec stateSpec), that
in turn sets up an intent to the service, which will then call the
encodeSetMusicState() function of the device. encodeSetMusicState is
available for pebble only. There are empty stubs for other devices.
2016-06-08 20:31:48 +02:00
Steffen Liebergeld
0470731e4b
PebbleProtocol: Do not call encodeSetMusicState in encodeSetMusicInfo
...
encodeSetMusicState will be accessible on its own. If it was used to set
the music state, a call to encodeSetMusicInfo must not reset this info
arbitrarily.
2016-06-08 20:16:33 +02:00
cpfeiffer
2b6ee41970
Add logging of heartrate values #318
2016-06-05 22:37:42 +02:00
cpfeiffer
ca26e27c60
Basic support for Mi Band 2 #323 , untested
2016-06-05 22:31:07 +02:00
Andreas Shimokawa
9d3f3c57cd
Pebble: make disabling of appmessage handlers more generic
...
Also disable morpheuz handler if morpheuz is not the chosen activity tracker
.... and bump reported version to 3.12 to match the latest pebble release
2016-06-04 21:50:26 +02:00
Andreas Shimokawa
321707af8f
Pebble: ignore incoming misfit data if misfit is not set as the preferred activty tracker
2016-06-04 21:33:38 +02:00
Daniele Gobbetti
968d15c8d8
Keep the pebble health data on the pebble watch if the activity provider is not pebble Health.
...
This will nack all pebble health datalog messages. As mentioned in #322 , this would allow to use multiple android device without secondary devices "sipping" the health data from the watch.
2016-06-04 18:21:49 +02:00
cpfeiffer
2e6536555b
Fix previous commit (compile!)
2016-05-31 22:56:22 +02:00
cpfeiffer
9a106667d2
Setting the wear location appears to fail for amazfit #274
...
So as a test, disable that for amazfit. Let's see what happens
next.
2016-05-31 22:33:38 +02:00
Andreas Shimokawa
19d7c03545
Pebble: get rid of log spamming when changing applications (unhandled message)
2016-05-31 14:18:45 +02:00
Andreas Shimokawa
b71597800a
Pebble: set device to reconnecting state when actively reconnecting
...
It makes it easier to watch connection attempts and the delay between them in control center.
2016-05-29 23:24:16 +02:00
Andreas Shimokawa
33da6c2925
Pebble: make sure that "waiting for reconnect" state is set when initial connect fails
2016-05-29 22:58:25 +02:00
cpfeiffer
2d49ce505a
Set state to "Waiting for reconnect" for BTLE devices
2016-05-26 23:48:05 +02:00
cpfeiffer
6e33c7364a
Remove some commented code
2016-05-26 22:21:58 +02:00
cpfeiffer
c360eb3392
This should fix some connection problems #274
...
Some APIs have become synchronous, it seems, e.g.
connectGatt() -> onConnectionStateChanged() -> discoverServices() -> onServicesDiscovered()
appears to happen synchronously. So connectGatt() will not return before services are discovered!
So now we deal with this situation.
2016-05-26 19:03:38 +02:00
Andreas Shimokawa
e3bee37b81
Change UUID prefix to 0x4767744272646700
2016-05-24 13:20:16 +02:00
Andreas Shimokawa
cb1ec5dccb
Make calendar event type byte instead of int
...
Now the UUID will be constructed like this:
High 64bit 0x4742474200 | type
Low 64bit id
2016-05-24 13:11:57 +02:00
Andreas Shimokawa
c9c9b420dc
Pebble: Send sunrise and sunset events to the pebble every day using AlarmManager
2016-05-24 11:19:57 +02:00
Andreas Shimokawa
af3cfefec0
Merge branch 'master' into feature-sunrise
2016-05-23 23:52:39 +02:00
Daniele Gobbetti
bef59ae9c0
Parse new version of Pebble health datalog message with tag "84".
...
This message was previously treated as a further "Sleep" message type, with firmware version 3.12 further types were added that are clearly unrelated to sleep (possibly to high-intensity activities like running etc.), hence the related code is now moved to a separate class.
The only decoded records are still sleep-related.
Fixes #312
2016-05-23 21:13:12 +02:00
Andreas Shimokawa
6370fdbebe
Merge branch 'master' into feature-sunrise
2016-05-22 01:25:52 +02:00
Andreas Shimokawa
0d7986a5ab
Pebble: rework incoming reconnection support
...
This is now completely generic and should work for other devices also
Fixes #296
2016-05-22 01:19:28 +02:00
Andreas Shimokawa
4bd578ebea
Pebble: send sunrise/sunset to watch for today and tomorrow, also delete previous timeline pins
2016-05-16 23:37:40 +02:00
Andreas Shimokawa
017f650b3f
Pebble: send sunrine and sunset pins to timeline when setting time in debug menu
...
This is just a test and it will leak your timeline data, since we never delete it.
Also this adds some rough infrastructure for calendar events.
2016-05-16 17:30:11 +02:00
cpfeiffer
3a1f91b5a8
Default to low latency mode #287
...
Tested with Mi1A and Mi1S -- works fine and faster than without
low-latency mode.
2016-05-15 00:22:53 +02:00
cpfeiffer
5963843216
Experimental support for #274 (untested yet)
2016-05-15 00:15:31 +02:00
Andreas Shimokawa
9b7f2c1e91
try to fix weiredness with pebble reconnects
2016-05-08 17:19:01 +02:00
Andreas Shimokawa
65a95366f4
Mi Band: Allow setting low-latency FW update mode in Mi Band development settings
2016-05-04 13:24:32 +02:00
cpfeiffer
10d7274aa1
Fix testcases (all this should be scrapped and redone with e.g. robolectric)
2016-04-29 21:58:08 +02:00
cpfeiffer
5e02724c4c
Make automatic reconnect after connection loss configurable #293
...
Mi Band: automatically reconnect when the device is back in range
Also: #89
2016-04-28 23:17:13 +02:00
cpfeiffer
e35ce978bd
Remove now unused imports + fix one more SharedPreferences usage
2016-04-25 23:43:19 +02:00
cpfeiffer
0704915a88
Move parsing of preference strings to int values to Prefs
2016-04-25 23:39:03 +02:00
cpfeiffer
0c715a2669
Wrap access to SharedPreferences with "Prefs"
...
(to centralize quirk handling)
2016-04-25 23:18:55 +02:00
cpfeiffer
98d7237ec3
Display a different notification icon, when disconnected
...
Better icons welcome :-)
2016-04-15 22:57:13 +02:00
cpfeiffer
78bf516897
Disabling sleep measurement for continuous measurement is not necessary
...
Looks like they don't interfere, after all. #178
2016-04-12 23:25:12 +02:00
cpfeiffer
f15a97d994
Initial live heartrate measurement in the live activity tab #178
2016-04-12 23:12:50 +02:00
cpfeiffer
802e9a8235
OK, revert to connectGatt(false), connect often does not work with true #249
2016-04-09 09:53:03 +02:00
cpfeiffer
1e5dbb6a23
OK, just connect(true) is not sufficient #249
...
(we again get connection problems. Let's try this.)
2016-04-07 20:53:25 +02:00
Daniele Gobbetti
a49335fa67
Allow to change stored samples converting only certain old types
2016-04-07 17:52:15 +02:00
Andreas Shimokawa
b1a93c430d
interrupt thread instead of joining to fix ANR
2016-04-07 00:21:21 +02:00
Andreas Shimokawa
e91b5a07bd
Pebble: change delay between reconects to 1,2,4,8,16,32,64 (max) seconds
2016-04-06 22:55:04 +02:00
Andreas Shimokawa
94cec55a20
Merge pull request #276 from roidelapluie/reconnect
...
Pebble: Smarter reconnection attempts
2016-04-06 22:41:07 +02:00
danielegobbetti
d2af3468f0
Add support for new datalog message added in pebble firmware 3.11
...
This adds support for storing deep sleep data.
2016-04-06 21:48:16 +02:00
Julien Pivotto
e42a041448
Pebble: Smarter reconnection attempts
...
Sleep several seconds between reconnection attempts:
One second after first attempt, two after the second, and so on.
refs #89
2016-04-06 12:37:23 +02:00
Daniele Gobbetti
51def0d497
Add light intensity to the known steps datalog message.
...
Add support for record version 6 introduced with firmware 3.11.
There are more data in each record now, but we still do not know what they mean.
Close #270
2016-04-04 23:33:17 +02:00
Daniele Gobbetti
34600e085e
Fix wrong assignment, needed to properly deal with datalog messages longer than 255
2016-04-04 23:13:57 +02:00
Andreas Shimokawa
a15b327ff1
Refactoring: get rid of ServiceCommand, use new CallSpec and MusicSpec to pass Call and Music info
2016-04-04 20:08:34 +02:00
cpfeiffer
3e3cf462a6
Attempt to re-enable automatic reconnect (autosensing) #249
...
(now that initializing device works again)
2016-04-03 23:32:15 +02:00
cpfeiffer
59c3970008
Reuse characteristic objects #234
2016-04-03 23:01:58 +02:00
cpfeiffer
b129844169
Small fixes to PR 273 #232
...
- dynamically toggle hr sleep support when preference changes
- check hr support dynaically after device info is available to avoid false error message
2016-04-03 22:38:06 +02:00