Andreas Shimokawa
e78c912be3
Only sync time on time/timezone changes if appropriate option is set.
2015-05-10 11:21:16 +02:00
cpfeiffer
86119a877a
Slight refactoring, add some Logging
2015-05-10 00:18:42 +02:00
cpfeiffer
39d84831ed
Unset dynamic device state (like battery level, etc.) when disconnected
2015-05-10 00:05:29 +02:00
cpfeiffer
1a7c3c42e4
Do both BT and BTLE discovery (one after another) #33
2015-05-09 23:54:47 +02:00
cpfeiffer
60210e069c
Fix validity check with gender and type
2015-05-09 23:13:47 +02:00
Andreas Shimokawa
6f162c593b
Pebble message intent notifications default to "never" now
...
If these get turned on, Conversations notifications will be handled through Pebble message intents and get filtered out from generic notifcation handling.
2015-05-08 12:50:42 +02:00
Andreas Shimokawa
c999c52501
convert sequence of ifs to switch
2015-05-08 11:18:06 +02:00
cpfeiffer
b2518ff927
Discovery + pairing now works
...
User info is asked on demand before starting the actual pairing.
When no (valid) user info is given, dummy user infor will be used instead.
2015-05-07 23:52:44 +02:00
Andreas Shimokawa
157deff237
Send current time to device if time/timezone changes. Closes #51 .
2015-05-07 23:46:18 +02:00
cpfeiffer
1604ae2c22
#33 only start discovery activity when bt is enabled
2015-05-07 22:15:53 +02:00
cpfeiffer
a23690c8e1
Initial support for Mi Band specific settings
...
(User info for now).
TODO: We need to have that information *before* starting a connect
2015-05-07 01:32:17 +02:00
Andreas Shimokawa
8b75440867
Pebble: feed WeatherNeat with bogus data (testing)
...
This is completely useless, but it is the first time I could successfully send
data to a watchface.
2015-05-06 23:47:58 +02:00
cpfeiffer
0c039b8a46
Start discovery activity automatically when no devices available ( #33 )
2015-05-06 22:59:31 +02:00
cpfeiffer
0629d6aa5d
Small improvements to discovery, only scan for 1min #33
2015-05-06 22:59:00 +02:00
Andreas Shimokawa
33db0bf890
Pebble: handle DATALOG and PHONEVERSION endpoints directly in protocol
...
This allows to remove all protocol inspection in PebbleIoThread
2015-05-06 11:43:01 +02:00
cpfeiffer
7b02548427
Clear task stack after discovery ( #33 )
2015-05-06 00:17:28 +02:00
cpfeiffer
50034e0bfe
Request battery info in initialize()
2015-05-05 23:25:54 +02:00
Andreas Shimokawa
3e85efa898
Display battery level if known. Should work on Miband, untested.
2015-05-05 22:52:25 +02:00
Andreas Shimokawa
9efcd8974d
Add GBDeviceCommandSendBytes for generic pre encoded commands that are meant to be send to a device directly
...
This is useful for Debugging. We can now send answers to data from the Device directly
int he procol implementation without messing with code in the GBDEviceIoThread's implementation.
This commit also adds test code for interaction with WeatherNeat (so far nothing works though)
2015-05-05 14:41:10 +02:00
Andreas Shimokawa
d09b5442cf
Put FW/HW info inside its own TextView to cleanup the device list
2015-05-05 11:16:57 +02:00
cpfeiffer
cf12c78a64
Ensure that discovery doesn't display duplicates ( #33 )
2015-05-05 01:08:30 +02:00
cpfeiffer
9df661bd96
Initial (ugly) support for device discovery and pairing ( #3 )
2015-05-05 00:48:54 +02:00
Andreas Shimokawa
e859ece7c6
Add Support for notifications send to Pebble from 3rd party applications
...
This enables support for Conversations without using generic notificaion support.
Other applications could also work partly but are untested.
This commit also changes the SettingsActivity to use Comboboxes instead of two
Checkboxes for each notification source.
2015-05-04 01:03:56 +02:00
Andreas Shimokawa
93b463c47e
update German translation
2015-05-01 10:08:24 +02:00
cpfeiffer
3e79269d43
#46 add missing GBApplication
2015-05-01 09:36:33 +02:00
Andreas Shimokawa
f143c9ec54
androidstudio vs. eclipse :/
2015-05-01 01:49:43 +02:00
cpfeiffer
8b3b4d0882
#46 make all strings localizable
2015-05-01 01:26:30 +02:00
Andreas Shimokawa
75b9d0e833
simplyfy SettingsActiviy code
2015-05-01 00:56:16 +02:00
Andreas Shimokawa
e65c492792
Pebble: display progressbar during installation of apps/firmware
2015-04-29 00:21:02 +02:00
Andreas Shimokawa
01e96f9c8d
Pebble: Bugfix for beeing stuck while waiting for a slot, when none is available
2015-04-28 23:35:12 +02:00
Andreas Shimokawa
31b01d860f
Pebble: notification cleanups
...
- remove notification update code from PebbleIoThread (is in generic code now)
- use a separate notification for app/firmware installation
2015-04-28 21:59:53 +02:00
cpfeiffer
5a458611e2
Set the time during initialization. Necessary for steps tracking.
...
Also see #31
2015-04-27 21:43:57 +02:00
cpfeiffer
8e25c03350
display connection state in notification area
2015-04-27 21:19:09 +02:00
Andreas Shimokawa
462f9f028f
Pebble: do not call setReceiversEnableState() from PebbleIoThread anymore, handling had been moved to generic code
2015-04-27 01:24:42 +02:00
Andreas Shimokawa
2eb62ebff3
Pebble: Speed up app/firmware installation by sending 2000 bytes at once instead of 512. Closes #22 .
2015-04-27 01:15:03 +02:00
Andreas Shimokawa
c06ef3d260
Pebble: try to shut up datalog, which might cause battery drain on the watch
2015-04-26 01:43:24 +02:00
Andreas Shimokawa
613ff1fc91
Pebble: corrections to PebbleIoThreads, better logging
2015-04-26 00:54:41 +02:00
cpfeiffer
0377a751b0
be even more robust #35
2015-04-25 23:49:07 +02:00
cpfeiffer
1772076b62
Log service creation and destruction
2015-04-25 23:49:07 +02:00
Andreas Shimokawa
442ae6499a
Pebble: Better logging and hexdump for short packages to endpoint 6778
2015-04-25 23:13:22 +02:00
cpfeiffer
c773181da3
Request and display device info (connection state and firmware version)
...
- request device info initially (connection state)
- request device info (firmware) when connected
This also fixes the wrong connection state being displayed on
orientation change.
2015-04-24 23:09:35 +02:00
cpfeiffer
274e8591dc
Initialize the BTLE device after the services are discovered.
...
This hopefully helps with the MI Band automatically disconnecting.
2015-04-24 22:21:35 +02:00
Daniele Gobbetti
98696ce9e2
Implement setting the time on the miband.
...
It works from the debug activity, since I am not sure about the value of
the ts argument, it always sets the current time.
2015-04-23 14:11:57 +02:00
cpfeiffer
cf681a089a
Add the device if it's not in the list yet.
2015-04-22 20:38:05 +02:00
cpfeiffer
1ff1c20056
Some more logging
2015-04-22 20:38:04 +02:00
Andreas Shimokawa
ab2f5a73a8
Quick fix for crash when connecting to a Miband with invalid address in settings.
2015-04-21 22:35:11 +02:00
cpfeiffer
06d8488792
#15 log as info, not error
2015-04-20 23:45:34 +02:00
Andreas Shimokawa
b391128a56
Merge branch 'master' of https://github.com/Freeyourgadget/Gadgetbridge
2015-04-20 23:39:02 +02:00
Andreas Shimokawa
661ed9c612
Pebble: When opening a firmware print for which HW revision it is.
2015-04-20 23:38:00 +02:00
cpfeiffer
1e3ba57b03
fix unpaired MI devices disappearing from view ( #15 )
2015-04-20 23:25:46 +02:00
