This PR aims to add support for the newer Fossil Gen. 6 Hybrid models, which are pretty similar to the older HR's.
Here's my checklist
- [x] make GB recognize and accept new watches
- [ ] find out how SPO2 is transmitted
- [ ] extend activity data to include Oxygen data
- [x] create timeout for requests to avoid deadlocks
- [x] fix device vibration on every reconnect
- [ ] create API for voice commands
- [x] figure out how the voice data works
Co-authored-by: Daniel Dakhno <dakhnod@gmail.com>
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2775
Co-authored-by: dakhnod <dakhnod@noreply.codeberg.org>
Co-committed-by: dakhnod <dakhnod@noreply.codeberg.org>
...to allow intents to start activities on the android device.
Add pop-up asking for permission to "Display over other apps"
Add info for intents on Bangle.js
Add message to display on "Display over other apps" permission pop-up
Move permission to display over other apps to main build variant/flavor.
fix getting permission for display over other apps.
Clarify that permission to display over other apps is mainly for Bangle.js.
try to deal with possible outstanding steps count synced on the first sync of the day (those may spoil the whole day activity);
take into account timezone diffs between local time and UTC for check steps of a day;
add some extra logging to help investigate possible issues reported by users
inform GB about new activity samples immediately after the sync (solves "lazy" refresh of the device card)
The notification, once enabled, can only be triggerd once per day, mind that when testing.
Packet structure:
```
00:c2:00:3a:01:00:00:00:01:88:13:00:00
00:c2:00: - chunked transfer type 2
3a: - command set goals/notificatrions
01: - 01 - set steps goal, 02 - set calories goal, 03 - both
00:00:00: - delimiter
01: - enable steps goal notification
88:13: - set steps goal (5000)
00:00 - delimiter
```
This is sent when goal notification switch is enabled in Zepp app:
```
00:c2:00:3a:03:00:00:00:01:40:1f:00:00:01:2c:01:00:00
00:c2:00: - chunked transfer type 2
3a: - command set goals/notificatrions
03: - 01 - set steps goal, 02 - set calories goal, 03 - both
00:00:00: - delimiter
01: - enable steps goal notification
40:1f: - steps goal (8000)
00:00: - delimiter
01: - enable calories goal notification (seems to be not used in Neo)
2c:01: - set calories goal (300)
00:00 - delimiter
```
And when disabled:
`00:c2:00:3a:03:00:00:00:00:40:1f:00:00:00:2c:01:00:00`
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2780
Co-authored-by: NekoBox <nekobox@noreply.codeberg.org>
Co-committed-by: NekoBox <nekobox@noreply.codeberg.org>
Also implemented a `force_calendar_sync` command for the pebble-like
implementation to cope with out of sync databases (calling the receiver
doesn't work as of now)
this PR aims to add device for multiple connected devices at once.
A lot of stuff already works, some things need to be done:
- [x] change DeviceCommunicationService to hold multiple devices and supports
- [x] implement connect / disconnect logic
- [x] widgets, not really suited for multiple devices, so far
- [x] change the notification to show multiple devices
- [ ] change GBDeviceService#onFindDevice and similar API functions to target individual devices, not all connected.
- [x] move auto-reconnect setting to device settings
- [x] fix music event crash
- [x] work out behaviour when pressing "connect" from notification
- [ ] handle service crashes
- [ ] suit coordinator methods for multiple devices of same kind
- [x] change ACL_CONNECTED receiver to connect to devices that are not currently registered in DeviceCommunicationService
- [ ] adjust after-boot auto-connection logic
- [ ] fix hanging device support. Device says disconnected, GB says connected
- [x] firmware updater doesn't work
My attempt to make onFindDevice work was to change the arguments to ```EventHandler#onFindDevice(GBDevice device, boolean start)```.
The Problem is that this forces the device-specific implementations to also accept GBDevice as an argument.
Co-authored-by: Daniel Dakhno <dakhnod@gmail.com>
Co-authored-by: Andreas Shimokawa <shimokawa@fsfe.org>
Co-authored-by: dakhnod <dakhnod@gmail.com>
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2526
Co-authored-by: dakhnod <dakhnod@noreply.codeberg.org>
Co-committed-by: dakhnod <dakhnod@noreply.codeberg.org>
added an optional id to identify the request.
if a request with id occurs, a response with the same id is returned.
Co-authored-by: Rarder44 <lpozzi44@gmail.com>
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2683
Co-authored-by: rarder44 <rarder44@noreply.codeberg.org>
Co-committed-by: rarder44 <rarder44@noreply.codeberg.org>
This PR adds build flavors to `build.gradle`. The default is called `main`, but we also add `banglejs` which allows the building of an app called `Bangle.js Gadgetbridge`.
This will have internet connectivity, allowing Bangle.js watches to request data directly from the internet - and it's named so as hopefully not to be confused with the normal offline Gadgetbridge, while still giving credit.
Eventually the plan is to put this on the Google Play store, and to have additions in it which are good for Bangle.js users but would otherwise negatively impact normal Gadgetbridge users (a build flavor is used so we can keep the same codebase and not fork).
About naming - I'd mentioned `Gadgetbridge for Bangle` to @ashimokawa but thinking about how it would appear in the app store and Android apps list, it probably makes sense to call it `Bangle.js Gadgetbridge` so it's listed under `B...`. Happy to change or use something else if you have strong opinions though.
**Note:** adding build flavors seems to add the flavor name to existing builds. As a result, *all other builds will now have `main` in the name*. Unfortunately I didn't see another way around this, but hopefully it won't break anything.
Co-authored-by: Gordon Williams <gw@pur3.co.uk>
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2621
Co-authored-by: gfwilliams <gfwilliams@noreply.codeberg.org>
Co-committed-by: gfwilliams <gfwilliams@noreply.codeberg.org>
This PR adds support for a new custom menu system on the Fossil Hybrid HR, developed by @dakhnod. For regular users this PR will change nothing, apart from also giving an extra option to light up the display when receiving new notifications.
For more advanced users, there's the [Fossil HR Menu Companion app](https://github.com/dakhnod/Fossil-HR-Menu-Companion) that's needed to enable and configure the new menu system. Just disable one or more of the physical buttons in Gadgetbridge and configure them instead in the companion app to get started.
Co-authored-by: Daniel Dakhno <dakhnod@gmail.com>
Co-authored-by: Arjan Schrijver <a_gadgetbridge@anymore.nl>
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2616
- Fitness App Tracking Start already works, Stop is commented out for
time being
- Catch exception in case the package name for controlled app doesn't
exist/work
Battery percentages were shown in gadgetbridge, but not stored, so the chart didn't work.
Call AbstractDeviceSupport.handleGBDeviceEvent() instead of rolling our own battery update,
and that does call createStoreTask()
This really seems to be the same device, but it does have a different firmware
and a different bluetooth name.
Do this to prevent cross flashing - which might actually be okay but we do not know.
This PR adds the ability to change activity recognition settings on the watch.
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2539
Co-authored-by: dakhnod <dakhnod@noreply.codeberg.org>
Co-committed-by: dakhnod <dakhnod@noreply.codeberg.org>
New Huami Amazfit GTS 2 Mini activity for Outdoor Trekking/Hiking.
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2528
Co-authored-by: Sebastian Krey <skrey@noreply.codeberg.org>
Co-committed-by: Sebastian Krey <skrey@noreply.codeberg.org>
Adds Support for BLDC controller VESC connected to a BLE serial device like an HM10.
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2491
Co-authored-by: dakhnod <dakhnod@noreply.codeberg.org>
Co-committed-by: dakhnod <dakhnod@noreply.codeberg.org>
This PR adds not only the device Bose QC35,
it also adds the following autop-reconnect feature:
When the headphones are turned on, the initiate a connection with the phone.
With this change, GB is notified about said change, and tries to establish a connection to the newly connected device, if the appropriate device setting is set.
The QC35 headpones always have NC turned on after boot, thus the main feature of this implementation is to turn off NC as soon as the headphones are turned on and connected to the phone.
I am open for discussion regarding the implementation, but this seems like a good first proposal.
What is missing is the ability to connect to multiple devices, since in many cases headphones can be connected to the watch simultaniously to a smartwatch or other gadget.
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2520
Co-authored-by: dakhnod <dakhnod@noreply.codeberg.org>
Co-committed-by: dakhnod <dakhnod@noreply.codeberg.org>
This is used for setting world clock and setting canned messages for call rejection.
This PR implements setting the canned messages, but unfortunately the feature is somehow not "unlocked"
added sync "steps" from PineTime/InfiniTime to Gadgetbridge.
notes:
* Steps sync works only since InfiniTime 1.7
* InfiniTime advertise "steps" info when the PineTime screen is ON (and a bit after that). hence:
* you should unlock the PineTime screen before end of the day to not loose your latest progress (since the last unlock) at the end of the day;
* when the PineTime screen is ON and you are moving, PineTime will send "steps" count every about 2-10 seconds, and Gadgetbridge may start to treat this data as an Activity (and also displaying it in Activity charts). that data and charts will not be accurate: you should wait for ["Health/Fitness data storage and expose to companion app](https://github.com/InfiniTimeOrg/InfiniTime/projects/4)" project to be implemented on the PineTime side. and meanwhile, in Gadgetbridge open "Device specific settings" and change/uncheck option in "Charts tabs" and "Activity info on device card" to leave only Steps data.
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2486
Co-authored-by: ITCactus <itcactus@noreply.codeberg.org>
Co-committed-by: ITCactus <itcactus@noreply.codeberg.org>
This PR aims to add the on-device connection confirmation for the Fossil HR.
This seems mandatory, since, at least on my watch, without said confirmation certain files like the configuration cannot be accesses, e.g. the time on the watch cannot be set etc.
The mystery yet to be solved is how to get the watch to not ask for a confirmation on every new connection or reconnection attempt, since that can get very annoying.
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2451
Co-authored-by: dakhnod <dakhnod@noreply.codeberg.org>
Co-committed-by: dakhnod <dakhnod@noreply.codeberg.org>
This affects InfiniTime and Huami
For InfiniTime it probably resulted in the wrong time being displayed
For Huami is resulted to request the wrong data from the band/watch
We used timezone.getDSTOffset() which always returns the DST offset (also in non
DST time)
We need to pass the time being observed to calendar.getOffset() to get the real
offset including DST at that specfic time which then either includes DST offset or not.
- add support for ANC-light mode
- handle multiple GBDeviceEvents
- add fake fw and hw versions to make DBHelper happy
- fix battery charge detection logic
- extract some strings to resources
Nothing Ear (1) are wireless earbuds that support active noise
suppression, transparency mode and several gestures.
This initial commit adds support for:
- reading battery level
- setting audio mode
- setting in-ear auto detection
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2403
Co-authored-by: daniele <daniele@noreply.codeberg.org>
Co-committed-by: daniele <daniele@noreply.codeberg.org>
The body_length field in the header is only one byte (byte 8). If it it is set to 256 it overflows to 0 wich results in a corrupt notification. So the maximum body length is 255.
* Handle all notifications via GB.
* Create all notification channels in one place.
* Lazily init notification channels.
* Re-create notification channels to update their localized names.
This PR replaces (just for the Fossil Hybrid HR) the current watchface configuration screen with the native Gadgetbridge app manager. Bonus feature: when multiple watchfaces are installed on the watch, they can be switched by tapping on them.
Co-authored-by: Arjan Schrijver <a_gadgetbridge@anymore.nl>
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2302
Co-authored-by: Arjan Schrijver <arjan5@noreply.codeberg.org>
Co-committed-by: Arjan Schrijver <arjan5@noreply.codeberg.org>
fixup! huamni: send windspeed in beaufort
BipS: send windspeed as km/h
huami: Always send sunrise and sunset
There is no need to look at send_sunrise_sunset, this is peble spesific
because it could be annoying on that platform (an extra line in the
timeline). On huami devices, the watchface desides what to show.
Signed-off-by: Robbert Gurdeep Singh <git@beardhatcode.be>
Mi5: set supportsSunriseSunsetWindHumidity to true
Signed-off-by: Robbert Gurdeep Singh <git@beardhatcode.be>
huamni: send windspeed in beaufort
Signed-off-by: Robbert Gurdeep Singh <git@beardhatcode.be>
Co-authored-by: Robbert Gurdeep Singh <git@beardhatcode.be>
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2247
Co-Authored-By: beardhatcode <beardhatcode@noreply.codeberg.org>
Co-Committed-By: beardhatcode <beardhatcode@noreply.codeberg.org>
Amazfit GTS2/GTR2: Add missing menu items
Fixes#2193Fixes#2230Fixes#2242
Amazfit GTS2/GTR2: Fix setting menu items
At least on the GTR2e, including the "watchface" menu item causes the
configuration request to be ignored. Assuming the other GTS2 and GTR2
variants behave the same, this patch ensures the forceWatchface argument
is set to false when setting display items.
Additionally, we now use the correct resource ID for the default
settings.
Co-authored-by: Vianney le Clément de Saint-Marcq <code@quartic.eu>
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2249
Co-Authored-By: Vianney le Clément de Saint-Marcq <vianney@noreply.codeberg.org>
Co-Committed-By: Vianney le Clément de Saint-Marcq <vianney@noreply.codeberg.org>
The Mi app only has a reminder field and no description field, so
I'm assuming we can only send one string.
In bffb8e8f87 it was noticed that the
title was not displaying so I'm changing this for all Huami devices.
It seems that newer firmwares have watchfaces which are a special kind of apps
This means that a simply specifying the layout of widget does not longer work
(At least we do not know how)
This commit fixes bluetooth communication being completely stuck when
Gadgetbridge tries to render widgets (for example when switching force
white mode or when having the notification widget enabled in settings)
wasp-os is an open-source firmware, based on MicroPython, for smart
watches that are based on the nRF52 family of microcontrollers.
Currently this includes the hacker friendly PineTime from Pine64 as
well as the Colmi P8, which is a popular device with watch modders.
For GadgetBridge integration wasp-os is very similar to handling
Espruino/BangleJS: the watch will interact with the bridge by
providing REPL-over-BLE via the Nordic UART service.
wasp-os implements the same JSON-wrapped-in-GB()-function-call
protocol used for BangleJS buy the differences in capability
between the two firmwares lead us to introducing a different
device type... and also a different icon since the lead devices
for wasp-os are square!
I plan to keep as aligned as possible with the BangleJS device
type, however at present the major differences include:
1. Specify the bonding style (wasp-os currently does not support
bonding... so no need to ask).
2. Disable some of the not-yet-implemented features.
3. Reduce the minimum packet size to fix communication reliability
issues with the MicroPython NUS implementation.
4. Switch the date/time setting syntax from JavaScript to MicroPython.
Merge branch 'master' into master
Added support for Amazfit GTR 2e.
Co-authored-by: Jochen S <tsalin@noreply.codeberg.org>
Co-authored-by: arisel <arisel@arisel.de>
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2182
Co-Authored-By: Jochen S. <tsalin@noreply.codeberg.org>
Co-Committed-By: Jochen S. <tsalin@noreply.codeberg.org>
Merge branch 'amazfit_neo' of codeberg.org:xaos/Gadgetbridge into amazfit_neo
updated menu items and settings, also disabled music info
added some classes, strings, etc. for Amazfit Neo (shows up but does not connect)
Merge branch 'amazfit_neo' of codeberg.org:xaos/Gadgetbridge into amazfit_neo
Merge branch 'master' into amazfit_neo
updated menu items and settings, also disabled music info
Merge branch 'authkey_errmsg' into amazfit_neo
refined error message for invalid authentication keys
added some classes, strings, etc. for Amazfit Neo (shows up but does not connect)
Co-authored-by: xaos <xaos@xaos.tech>
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2117
Co-Authored-By: xaos <xaos@noreply.codeberg.org>
Co-Committed-By: xaos <xaos@noreply.codeberg.org>
The current GATT characteristic list mentions it was up to date as of populated 2015-09-28. In the last 6 years, significantly more characteristics have been added to the Bluetooth spec. While it's not necessary to have all these constants available in Gadgetbridge, it's useful while implementing new features for a device or adding support for a new device
This was retrieved from https://btprodspecificationrefs.blob.core.windows.net/assigned-values/16-bit%20UUID%20Numbers%20Document.pdf. The GATT characteristics were parsed from that PDF and converted to constants with names via:
```
String description = uuid.description.trim().toUpperCase().replace(' ', '_').replace('-', '_');
System.out.println("public static final UUID UUID_CHARACTERISTIC_" + description + " = UUID.fromString((String.format(AbstractBTLEDeviceSupport.BASE_UUID, \"" + uuid.uuid + "\")));");
```
fix a tab vs. space misalign
add missing menu items for Bip U (and possibly others)
remove shortcut config from Amazfit Bip U settings
add (most) menu items for Amazfit Bip U
Co-authored-by: AluminumTank <joel@beckmeyer.us>
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2107
Co-Authored-By: TinfoilSubmarine <tinfoilsubmarine@noreply.codeberg.org>
Co-Committed-By: TinfoilSubmarine <tinfoilsubmarine@noreply.codeberg.org>
- InfiniTime 0.9 now supports messages up to 100 chars (instead of max 18 previously)
- Remove the hack that was implemented as a workaround to a bug in InfiniTime that would ignore the last character of the notification message (https://github.com/JF002/Pinetime/issues/109).
These 2 features are enabled only if the firmware version is >= 0.9.
