- open app preferences screen from device card menu
- open auth preferences screen from DiscoveryActivity
- add explanation about Auth key, make it open wiki link, fix#2240
- add New protocol checkbox and explanation when first pairing Miband 6
Allows to install latest watchapps
It seems that every time the firmware gets a major update, the new watchapps
have a different minor version, we dont need to check for that because watchapps
seem to be compatible accross firmware versions
this PR aims to add device for multiple connected devices at once.
A lot of stuff already works, some things need to be done:
- [x] change DeviceCommunicationService to hold multiple devices and supports
- [x] implement connect / disconnect logic
- [x] widgets, not really suited for multiple devices, so far
- [x] change the notification to show multiple devices
- [ ] change GBDeviceService#onFindDevice and similar API functions to target individual devices, not all connected.
- [x] move auto-reconnect setting to device settings
- [x] fix music event crash
- [x] work out behaviour when pressing "connect" from notification
- [ ] handle service crashes
- [ ] suit coordinator methods for multiple devices of same kind
- [x] change ACL_CONNECTED receiver to connect to devices that are not currently registered in DeviceCommunicationService
- [ ] adjust after-boot auto-connection logic
- [ ] fix hanging device support. Device says disconnected, GB says connected
- [x] firmware updater doesn't work
My attempt to make onFindDevice work was to change the arguments to ```EventHandler#onFindDevice(GBDevice device, boolean start)```.
The Problem is that this forces the device-specific implementations to also accept GBDevice as an argument.
Co-authored-by: Daniel Dakhno <dakhnod@gmail.com>
Co-authored-by: Andreas Shimokawa <shimokawa@fsfe.org>
Co-authored-by: dakhnod <dakhnod@gmail.com>
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2526
Co-authored-by: dakhnod <dakhnod@noreply.codeberg.org>
Co-committed-by: dakhnod <dakhnod@noreply.codeberg.org>
added an optional id to identify the request.
if a request with id occurs, a response with the same id is returned.
Co-authored-by: Rarder44 <lpozzi44@gmail.com>
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2683
Co-authored-by: rarder44 <rarder44@noreply.codeberg.org>
Co-committed-by: rarder44 <rarder44@noreply.codeberg.org>
This PR adds build flavors to `build.gradle`. The default is called `main`, but we also add `banglejs` which allows the building of an app called `Bangle.js Gadgetbridge`.
This will have internet connectivity, allowing Bangle.js watches to request data directly from the internet - and it's named so as hopefully not to be confused with the normal offline Gadgetbridge, while still giving credit.
Eventually the plan is to put this on the Google Play store, and to have additions in it which are good for Bangle.js users but would otherwise negatively impact normal Gadgetbridge users (a build flavor is used so we can keep the same codebase and not fork).
About naming - I'd mentioned `Gadgetbridge for Bangle` to @ashimokawa but thinking about how it would appear in the app store and Android apps list, it probably makes sense to call it `Bangle.js Gadgetbridge` so it's listed under `B...`. Happy to change or use something else if you have strong opinions though.
**Note:** adding build flavors seems to add the flavor name to existing builds. As a result, *all other builds will now have `main` in the name*. Unfortunately I didn't see another way around this, but hopefully it won't break anything.
Co-authored-by: Gordon Williams <gw@pur3.co.uk>
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2621
Co-authored-by: gfwilliams <gfwilliams@noreply.codeberg.org>
Co-committed-by: gfwilliams <gfwilliams@noreply.codeberg.org>
This PR adds support for a new custom menu system on the Fossil Hybrid HR, developed by @dakhnod. For regular users this PR will change nothing, apart from also giving an extra option to light up the display when receiving new notifications.
For more advanced users, there's the [Fossil HR Menu Companion app](https://github.com/dakhnod/Fossil-HR-Menu-Companion) that's needed to enable and configure the new menu system. Just disable one or more of the physical buttons in Gadgetbridge and configure them instead in the companion app to get started.
Co-authored-by: Daniel Dakhno <dakhnod@gmail.com>
Co-authored-by: Arjan Schrijver <a_gadgetbridge@anymore.nl>
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2616
- Add more info about AutoExport into DataManagement activity
- Fix scheduleAlarm name
- Run AutoExporter in another thread
- Start AutoExporter on app startup if not running yet from AutoStartReceiver
- Save and show time of scheduled and last executed AutoExport
- Fitness App Tracking Start already works, Stop is commented out for
time being
- Catch exception in case the package name for controlled app doesn't
exist/work
Battery percentages were shown in gadgetbridge, but not stored, so the chart didn't work.
Call AbstractDeviceSupport.handleGBDeviceEvent() instead of rolling our own battery update,
and that does call createStoreTask()
This really seems to be the same device, but it does have a different firmware
and a different bluetooth name.
Do this to prevent cross flashing - which might actually be okay but we do not know.
This PR adds the ability to change activity recognition settings on the watch.
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2539
Co-authored-by: dakhnod <dakhnod@noreply.codeberg.org>
Co-committed-by: dakhnod <dakhnod@noreply.codeberg.org>
New Huami Amazfit GTS 2 Mini activity for Outdoor Trekking/Hiking.
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2528
Co-authored-by: Sebastian Krey <skrey@noreply.codeberg.org>
Co-committed-by: Sebastian Krey <skrey@noreply.codeberg.org>
Adds Support for BLDC controller VESC connected to a BLE serial device like an HM10.
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2491
Co-authored-by: dakhnod <dakhnod@noreply.codeberg.org>
Co-committed-by: dakhnod <dakhnod@noreply.codeberg.org>
This PR adds not only the device Bose QC35,
it also adds the following autop-reconnect feature:
When the headphones are turned on, the initiate a connection with the phone.
With this change, GB is notified about said change, and tries to establish a connection to the newly connected device, if the appropriate device setting is set.
The QC35 headpones always have NC turned on after boot, thus the main feature of this implementation is to turn off NC as soon as the headphones are turned on and connected to the phone.
I am open for discussion regarding the implementation, but this seems like a good first proposal.
What is missing is the ability to connect to multiple devices, since in many cases headphones can be connected to the watch simultaniously to a smartwatch or other gadget.
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2520
Co-authored-by: dakhnod <dakhnod@noreply.codeberg.org>
Co-committed-by: dakhnod <dakhnod@noreply.codeberg.org>
This is used for setting world clock and setting canned messages for call rejection.
This PR implements setting the canned messages, but unfortunately the feature is somehow not "unlocked"
added sync "steps" from PineTime/InfiniTime to Gadgetbridge.
notes:
* Steps sync works only since InfiniTime 1.7
* InfiniTime advertise "steps" info when the PineTime screen is ON (and a bit after that). hence:
* you should unlock the PineTime screen before end of the day to not loose your latest progress (since the last unlock) at the end of the day;
* when the PineTime screen is ON and you are moving, PineTime will send "steps" count every about 2-10 seconds, and Gadgetbridge may start to treat this data as an Activity (and also displaying it in Activity charts). that data and charts will not be accurate: you should wait for ["Health/Fitness data storage and expose to companion app](https://github.com/InfiniTimeOrg/InfiniTime/projects/4)" project to be implemented on the PineTime side. and meanwhile, in Gadgetbridge open "Device specific settings" and change/uncheck option in "Charts tabs" and "Activity info on device card" to leave only Steps data.
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2486
Co-authored-by: ITCactus <itcactus@noreply.codeberg.org>
Co-committed-by: ITCactus <itcactus@noreply.codeberg.org>
This PR aims to add the on-device connection confirmation for the Fossil HR.
This seems mandatory, since, at least on my watch, without said confirmation certain files like the configuration cannot be accesses, e.g. the time on the watch cannot be set etc.
The mystery yet to be solved is how to get the watch to not ask for a confirmation on every new connection or reconnection attempt, since that can get very annoying.
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2451
Co-authored-by: dakhnod <dakhnod@noreply.codeberg.org>
Co-committed-by: dakhnod <dakhnod@noreply.codeberg.org>
- use correct DeviceCoordinator method supportsActivityTracking()
- remove placeholders from xml
- clarify comments in DeviceCoordinator
- clean up some previously added unused imports
- this tries to address a common request to display user data up front
- i would make this via a fragment, but RecyclerView doesn't like Fragments
- (fragments would make it much easier to also add a charts like view,
like we use on the Activity list tab)
- i added configuration that allows to disable it partially or fully
Co-authored-by: Petr Vaněk <vanous@noreply.codeberg.org>
Co-committed-by: Petr Vaněk <vanous@noreply.codeberg.org>
This affects InfiniTime and Huami
For InfiniTime it probably resulted in the wrong time being displayed
For Huami is resulted to request the wrong data from the band/watch
We used timezone.getDSTOffset() which always returns the DST offset (also in non
DST time)
We need to pass the time being observed to calendar.getOffset() to get the real
offset including DST at that specfic time which then either includes DST offset or not.
This adds a button which rotates the selected watchface by 90 degrees counter-clockwise to the hybridqr.
I did not manage to fix the autoorientation.
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2408
Co-authored-by: HelloCodeberg <hellocodeberg@noreply.codeberg.org>
Co-committed-by: HelloCodeberg <hellocodeberg@noreply.codeberg.org>
- rename some methods to better indicate their functions.
- make the notification filter to be allow or deny list,
solves #2256 and #336
- make app word filter to behave based on allow/deny settings.
- make Pebble notifications to honor the allow/deny settings.
- add generic "debug function" to Debug activity.
- add Message privacy mode settings, solves #2279
- add support for ANC-light mode
- handle multiple GBDeviceEvents
- add fake fw and hw versions to make DBHelper happy
- fix battery charge detection logic
- extract some strings to resources
Nothing Ear (1) are wireless earbuds that support active noise
suppression, transparency mode and several gestures.
This initial commit adds support for:
- reading battery level
- setting audio mode
- setting in-ear auto detection
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2403
Co-authored-by: daniele <daniele@noreply.codeberg.org>
Co-committed-by: daniele <daniele@noreply.codeberg.org>
