- Remove `ObjectFormatID`
- Remove function `ObjectFormatFromID`.
- Use `Sha1ObjectFormat` directly but not a pointer because it's an
empty struct.
- Store `ObjectFormatName` in `repository` struct
Refactor Hash interfaces and centralize hash function. This will allow
easier introduction of different hash function later on.
This forms the "no-op" part of the SHA256 enablement patch.
Fix#28056
This PR will check whether the repo has zero branch when pushing a
branch. If that, it means this repository hasn't been synced.
The reason caused that is after user upgrade from v1.20 -> v1.21, he
just push branches without visit the repository user interface. Because
all repositories routers will check whether a branches sync is necessary
but push has not such check.
For every repository, it has two states, synced or not synced. If there
is zero branch for a repository, then it will be assumed as non-sync
state. Otherwise, it's synced state. So if we think it's synced, we just
need to update branch/insert new branch. Otherwise do a full sync. So
that, for every push, there will be almost no extra load added. It's
high performance than yours.
For the implementation, we in fact will try to update the branch first,
if updated success with affect records > 0, then all are done. Because
that means the branch has been in the database. If no record is
affected, that means the branch does not exist in database. So there are
two possibilities. One is this is a new branch, then we just need to
insert the record. Another is the branches haven't been synced, then we
need to sync all the branches into database.
The function `GetByBean` has an obvious defect that when the fields are
empty values, it will be ignored. Then users will get a wrong result
which is possibly used to make a security problem.
To avoid the possibility, this PR removed function `GetByBean` and all
references.
And some new generic functions have been introduced to be used.
The recommand usage like below.
```go
// if query an object according id
obj, err := db.GetByID[Object](ctx, id)
// query with other conditions
obj, err := db.Get[Object](ctx, builder.Eq{"a": a, "b":b})
```
System users (Ghost, ActionsUser, etc) have a negative id and may be the
author of a comment, either because it was created by a now deleted user
or via an action using a transient token.
The GetPossibleUserByID function has special cases related to system
users and will not fail if given a negative id.
Refs: https://codeberg.org/forgejo/forgejo/issues/1425
(cherry picked from commit 6a2d2fa24390116d31ae2507c0a93d423f690b7b)
Fixes#27819
We have support for two factor logins with the normal web login and with
basic auth. For basic auth the two factor check was implemented at three
different places and you need to know that this check is necessary. This
PR moves the check into the basic auth itself.
Fixes#27598
In #27080, the logic for the tokens endpoints were updated to allow
admins to create and view tokens in other accounts. However, the same
functionality was not added to the DELETE endpoint. This PR makes the
DELETE endpoint function the same as the other token endpoints and adds unit tests
Closes#27455
> The mechanism responsible for long-term authentication (the 'remember
me' cookie) uses a weak construction technique. It will hash the user's
hashed password and the rands value; it will then call the secure cookie
code, which will encrypt the user's name with the computed hash. If one
were able to dump the database, they could extract those two values to
rebuild that cookie and impersonate a user. That vulnerability exists
from the date the dump was obtained until a user changed their password.
>
> To fix this security issue, the cookie could be created and verified
using a different technique such as the one explained at
https://paragonie.com/blog/2015/04/secure-authentication-php-with-long-term-persistence#secure-remember-me-cookies.
The PR removes the now obsolete setting `COOKIE_USERNAME`.
assert.Fail() will continue to execute the code while assert.FailNow()
not. I thought those uses of assert.Fail() should exit immediately.
PS: perhaps it's a good idea to use
[require](https://pkg.go.dev/github.com/stretchr/testify/require)
somewhere because the assert package's default behavior does not exit
when an error occurs, which makes it difficult to find the root error
reason.
- Currently in the cron tasks, the 'Previous Time' only displays the
previous time of when the cron library executes the function, but not
any of the manual executions of the task.
- Store the last run's time in memory in the Task struct and use that,
when that time is later than time that the cron library has executed
this task.
- This ensures that if an instance admin manually starts a task, there's
feedback that this task is/has been run, because the task might be run
that quick, that the status icon already has been changed to an
checkmark,
- Tasks that are executed at startup now reflect this as well, as the
time of the execution of that task on startup is now being shown as
'Previous Time'.
- Added integration tests for the API part, which is easier to test
because querying the HTML table of cron tasks is non-trivial.
- Resolves https://codeberg.org/forgejo/forgejo/issues/949
(cherry picked from commit fd34fdac1408ece6b7d9fe6a76501ed9a45d06fa)
---------
Co-authored-by: Gusted <postmaster@gusted.xyz>
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Co-authored-by: silverwind <me@silverwind.io>
- MySQL 5.7 support and testing is dropped
- MySQL tests now execute against 8.1, up from 5.7 and 8.0
- PostgreSQL 10 and 11 support ist dropped
- PostgreSQL tests now execute against 16, up from 15
- MSSQL 2008 support is dropped
- MSSQL tests now run against locked 2022 version
Fixes: https://github.com/go-gitea/gitea/issues/25657
Ref: https://endoflife.date/mysql
Ref: https://endoflife.date/postgresql
Ref: https://endoflife.date/mssqlserver
## ⚠️ BREAKING ⚠️
Support for MySQL 5.7, PostgreSQL 10 and 11, and MSSQL 2008 is dropped.
You are encouraged to upgrade to supported versions.
---------
Co-authored-by: techknowlogick <techknowlogick@gitea.com>
Part of #27065
This PR touches functions used in templates. As templates are not static
typed, errors are harder to find, but I hope I catch it all. I think
some tests from other persons do not hurt.
Blank Issues should be enabled if they are not explicit disabled through
the `blank_issues_enabled` field of the Issue Config. The Implementation
has currently a Bug: If you create a Issue Config file with only
`contact_links` and without a `blank_issues_enabled` field,
`blank_issues_enabled` is set to false by default.
The fix is only one line, but I decided to also improve the tests to
make sure there are no other problems with the Implementation.
This is a bugfix, so it should be backported to 1.20.
Part of #27065
This reduces the usage of `db.DefaultContext`. I think I've got enough
files for the first PR. When this is merged, I will continue working on
this.
Considering how many files this PR affect, I hope it won't take to long
to merge, so I don't end up in the merge conflict hell.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Currently, Artifact does not have an expiration and automatic cleanup
mechanism, and this feature needs to be added. It contains the following
key points:
- [x] add global artifact retention days option in config file. Default
value is 90 days.
- [x] add cron task to clean up expired artifacts. It should run once a
day.
- [x] support custom retention period from `retention-days: 5` in
`upload-artifact@v3`.
- [x] artifacts link in actions view should be non-clickable text when
expired.
They currently throw a Internal Server Error when you use them without a
token. Now they correctly return a `token is required` error.
This is no security issue. If you use this endpoints with a token that
don't have the correct permission, you get the correct error. This is
not affected by this PR.
1. The old `prepareQueryArg` did double-unescaping of form value.
2. By the way, remove the unnecessary `ctx.Flash = ...` in
`MockContext`.
Co-authored-by: Giteabot <teabot@gitea.io>
Just like `models/unittest`, the testing helper functions should be in a
separate package: `contexttest`
And complete the TODO:
> // TODO: move this function to other packages, because it depends on
"models" package
This PR implements a proposal to clean up the admin users table by
moving some information out to a separate user details page (which also
displays some additional information).
Other changes:
- move edit user page from `/admin/users/{id}` to
`/admin/users/{id}/edit` -> `/admin/users/{id}` now shows the user
details page
- show if user is instance administrator as a label instead of a
separate column
- separate explore users template into a page- and a shared one, to make
it possible to use it on the user details page
- fix issue where there was no margin between alert message and
following content on admin pages
<details>
<summary>Screenshots</summary>
</details>
Partially resolves#25939
---------
Co-authored-by: Giteabot <teabot@gitea.io>
- Resolves https://codeberg.org/forgejo/forgejo/issues/580
- Return a `upload_field` to any release API response, which points to
the API URL for uploading new assets.
- Adds unit test.
- Adds integration testing to verify URL is returned correctly and that
upload endpoint actually works
---------
Co-authored-by: Gusted <postmaster@gusted.xyz>
Fixes: #26333.
Previously, this endpoint only updates the `StatusCheckContexts` field
when `EnableStatusCheck==true`, which makes it impossible to clear the
array otherwise.
This patch uses slice `nil`-ness to decide whether to update the list of
checks. The field is ignored when either the client explicitly passes in
a null, or just omits the field from the json ([which causes
`json.Unmarshal` to leave the struct field
unchanged](https://go.dev/play/p/Z2XHOILuB1Q)). I think this is a better
measure of intent than whether the `EnableStatusCheck` flag was set,
because it matches the semantics of other field types.
Also adds a test case. I noticed that [`testAPIEditBranchProtection`
only checks the branch
name](c1c83dbaec/tests/integration/api_branch_test.go (L68))
and no other fields, so I added some extra `GET` calls and specific
checks to make sure the fields are changing properly.
I added those checks the existing integration test; is that the right
place for it?
Fixes#25564Fixes#23191
- Api v2 search endpoint should return only the latest version matching
the query
- Api v3 search endpoint should return `take` packages not package
versions
I kept sending pull requests that consisted of one-line changes. It's
time to
settle this once and for all. (Maybe.)
- Explain Gitea behavior and the consequences of each
setting better, so that the user does not have to consult
the docs.
- Do not use different spellings of identical terms
interchangeably, e.g. `e-mail` and `email`.
- Use more conventional terms to describe the same things,
e.g. `Confirm Password` instead of `Re-Type Password`.
- Introduces additional clarification for Mirror Settings
- Small adjustments in test
- This is a cry for help.
- Grammar and spelling consistencies for en-US locale
(e.g. cancelled -> canceled)
- Introduce tooltip improvements.
---------
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
- The permalink and 'Reference in New issue' URL of an renderable file
(those where you can see the source and a rendered version of it, such
as markdown) doesn't contain `?display=source`. This leads the issue
that the URL doesn't have any effect, as by default the rendered version
is shown and thus not the source.
- Add `?display=source` to the permalink URL and to 'Reference in New
Issue' if it's renderable file.
- Add integration testing.
Refs: https://codeberg.org/forgejo/forgejo/pulls/1088
Co-authored-by: Gusted <postmaster@gusted.xyz>
Co-authored-by: Giteabot <teabot@gitea.io>
Until now expired package data gets deleted daily by a cronjob. The
admin page shows the size of all packages and the size of unreferenced
data. The users (#25035, #20631) expect the deletion of this data if
they run the cronjob from the admin page but the job only deletes data
older than 24h.
This PR adds a new button which deletes all expired data.
---------
Co-authored-by: silverwind <me@silverwind.io>
Follow #25229
Copy from
https://github.com/go-gitea/gitea/pull/26290#issuecomment-1663135186
The bug is that we cannot get changed files for the
`pull_request_target` event. This event runs in the context of the base
branch, so we won't get any changes if we call
`GetFilesChangedSinceCommit` with `PullRequest.Base.Ref`.
- `setting.UI.Notification.EventSourceUpdateTime` is by default 10
seconds, which adds an 10 second delay before the test succeeds.
- Lower the interval to reduce it to at most 3 second delay (the code
only send events when they are at least 2 seconds old).
(cherry picked from commit 3adb9ae6009ff3ddebaed4875e086343f668ef7b)
Refs: https://codeberg.org/forgejo/forgejo/pulls/1166
Co-authored-by: Gusted <postmaster@gusted.xyz>
Co-authored-by: Giteabot <teabot@gitea.io>
Not too important, but I think that it'd be a pretty neat touch.
Also fixes some layout bugs introduced by a previous PR.
---------
Co-authored-by: Gusted <postmaster@gusted.xyz>
Co-authored-by: Caesar Schinas <caesar@caesarschinas.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fix#24662.
Replace #24822 and #25708 (although it has been merged)
## Background
In the past, Gitea supported issue searching with a keyword and
conditions in a less efficient way. It worked by searching for issues
with the keyword and obtaining limited IDs (as it is heavy to get all)
on the indexer (bleve/elasticsearch/meilisearch), and then querying with
conditions on the database to find a subset of the found IDs. This is
why the results could be incomplete.
To solve this issue, we need to store all fields that could be used as
conditions in the indexer and support both keyword and additional
conditions when searching with the indexer.
## Major changes
- Redefine `IndexerData` to include all fields that could be used as
filter conditions.
- Refactor `Search(ctx context.Context, kw string, repoIDs []int64,
limit, start int, state string)` to `Search(ctx context.Context, options
*SearchOptions)`, so it supports more conditions now.
- Change the data type stored in `issueIndexerQueue`. Use
`IndexerMetadata` instead of `IndexerData` in case the data has been
updated while it is in the queue. This also reduces the storage size of
the queue.
- Enhance searching with Bleve/Elasticsearch/Meilisearch, make them
fully support `SearchOptions`. Also, update the data versions.
- Keep most logic of database indexer, but remove
`issues.SearchIssueIDsByKeyword` in `models` to avoid confusion where is
the entry point to search issues.
- Start a Meilisearch instance to test it in unit tests.
- Add unit tests with almost full coverage to test
Bleve/Elasticsearch/Meilisearch indexer.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
The API should only return the real Mail of a User, if the caller is
logged in. The check do to this don't work. This PR fixes this. This not
really a security issue, but can lead to Spam.
---------
Co-authored-by: silverwind <me@silverwind.io>
Fix#25934
Add `ignoreGlobal` parameter to `reqUnitAccess` and only check global
disabled units when `ignoreGlobal` is true. So the org-level projects
and user-level projects won't be affected by global disabled
`repo.projects` unit.
The setting `MAILER_TYPE` is deprecated.
According to the config cheat sheet, it should be `PROTOCOL`.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
The version listed in rpm repodata should only contain the rpm version
(1.0.0) and not the combination of version and release (1.0.0-2). We
correct this behaviour in primary.xml.gz, filelists.xml.gz and
others.xml.gz.
Signed-off-by: Peter Verraedt <peter@verraedt.be>
Replace #25892
Close #21942
Close #25464
Major changes:
1. Serve "robots.txt" and ".well-known/security.txt" in the "public"
custom path
* All files in "public/.well-known" can be served, just like
"public/assets"
3. Add a test for ".well-known/security.txt"
4. Simplify the "FileHandlerFunc" logic, now the paths are consistent so
the code can be simpler
5. Add CORS header for ".well-known" endpoints
6. Add logs to tell users they should move some of their legacy custom
public files
```
2023/07/19 13:00:37 cmd/web.go:178:serveInstalled() [E] Found legacy public asset "img" in CustomPath. Please move it to /work/gitea/custom/public/assets/img
2023/07/19 13:00:37 cmd/web.go:182:serveInstalled() [E] Found legacy public asset "robots.txt" in CustomPath. Please move it to /work/gitea/custom/public/robots.txt
```
This PR is not breaking.
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
Replace #10912
And there are many new tests to cover the CLI behavior
There were some concerns about the "option order in hook scripts"
(https://github.com/go-gitea/gitea/pull/10912#issuecomment-1137543314),
it's not a problem now. Because the hook script uses `/gitea hook
--config=/app.ini pre-receive` format. The "config" is a global option,
it can appear anywhere.
----
## ⚠️ BREAKING ⚠️
This PR does it best to avoid breaking anything. The major changes are:
* `gitea` itself won't accept web's options: `--install-port` / `--pid`
/ `--port` / `--quiet` / `--verbose` .... They are `web` sub-command's
options.
* Use `./gitea web --pid ....` instead
* `./gitea` can still run the `web` sub-command as shorthand, with
default options
* The sub-command's options must follow the sub-command
* Before: `./gitea --sub-opt subcmd` might equal to `./gitea subcmd
--sub-opt` (well, might not ...)
* After: only `./gitea subcmd --sub-opt` could be used
* The global options like `--config` are not affected
Fix#25776. Close#25826.
In the discussion of #25776, @wolfogre's suggestion was to remove the
commit status of `running` and `warning` to keep it consistent with
github.
references:
-
https://docs.github.com/en/rest/commits/statuses?apiVersion=2022-11-28#about-commit-statuses
## ⚠️ BREAKING ⚠️
So the commit status of Gitea will be consistent with GitHub, only
`pending`, `success`, `error` and `failure`, while `warning` and
`running` are not supported anymore.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
current actions artifacts implementation only support single file
artifact. To support multiple files uploading, it needs:
- save each file to each db record with same run-id, same artifact-name
and proper artifact-path
- need change artifact uploading url without artifact-id, multiple files
creates multiple artifact-ids
- support `path` in download-artifact action. artifact should download
to `{path}/{artifact-path}`.
- in repo action view, it provides zip download link in artifacts list
in summary page, no matter this artifact contains single or multiple
files.
Before: the concept "Content string" is used everywhere. It has some
problems:
1. Sometimes it means "base64 encoded content", sometimes it means "raw
binary content"
2. It doesn't work with large files, eg: uploading a 1G LFS file would
make Gitea process OOM
This PR does the refactoring: use "ContentReader" / "ContentBase64"
instead of "Content"
This PR is not breaking because the key in API JSON is still "content":
`` ContentBase64 string `json:"content"` ``
we refactored `userIDFromToken` for the token parsing part into a new
function `parseToken`. `parseToken` returns the string `token` from
request, and a boolean `ok` representing whether the token exists or
not. So we can distinguish between token non-existence and token
inconsistency in the `verfity` function, thus solving the problem of no
proper error message when the token is inconsistent.
close#24439
related #22119
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Fixes (?) #25538
Fixes https://codeberg.org/forgejo/forgejo/issues/972
Regression #23879#23879 introduced a change which prevents read access to packages if a
user is not a member of an organization.
That PR also contained a change which disallows package access if the
team unit is configured with "no access" for packages. I don't think
this change makes sense (at the moment). It may be relevant for private
orgs. But for public or limited orgs that's useless because an
unauthorized user would have more access rights than the team member.
This PR restores the old behaviour "If a user has read access for an
owner, they can read packages".
---------
Co-authored-by: Giteabot <teabot@gitea.io>
related #16865
This PR adds an accessibility check before mounting container blobs.
---------
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: silverwind <me@silverwind.io>
This PR will display a pull request creation hint on the repository home
page when there are newly created branches with no pull request. Only
the recent 6 hours and 2 updated branches will be displayed.
Inspired by #14003
Replace #14003Resolves#311Resolves#13196Resolves#23743
co-authored by @kolaente
Follow #25229
At present, when the trigger event is `pull_request_target`, the `ref`
and `sha` of `ActionRun` are set according to the base branch of the
pull request. This makes it impossible for us to find the head branch of
the `ActionRun` directly. In this PR, the `ref` and `sha` will always be
set to the head branch and they will be changed to the base branch when
generating the task context.
Fixes#24723
Direct serving of content aka HTTP redirect is not mentioned in any of
the package registry specs but lots of official registries do that so it
should be supported by the usual clients.
Fix#25558
Extract from #22743
This PR added a repository's check when creating/deleting branches via
API. Mirror repository and archive repository cannot do that.
This adds an API for uploading and Deleting Avatars for of Users, Repos
and Organisations. I'm not sure, if this should also be added to the
Admin API.
Resolves#25344
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
Related #14180
Related #25233
Related #22639Close#19786
Related #12763
This PR will change all the branches retrieve method from reading git
data to read database to reduce git read operations.
- [x] Sync git branches information into database when push git data
- [x] Create a new table `Branch`, merge some columns of `DeletedBranch`
into `Branch` table and drop the table `DeletedBranch`.
- [x] Read `Branch` table when visit `code` -> `branch` page
- [x] Read `Branch` table when list branch names in `code` page dropdown
- [x] Read `Branch` table when list git ref compare page
- [x] Provide a button in admin page to manually sync all branches.
- [x] Sync branches if repository is not empty but database branches are
empty when visiting pages with branches list
- [x] Use `commit_time desc` as the default FindBranch order by to keep
consistent as before and deleted branches will be always at the end.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Fix#25088
This PR adds the support for
[`pull_request_target`](https://docs.github.com/en/actions/using-workflows/events-that-trigger-workflows#pull_request_target)
workflow trigger. `pull_request_target` is similar to `pull_request`,
but the workflow triggered by the `pull_request_target` event runs in
the context of the base branch of the pull request rather than the head
branch. Since the workflow from the base is considered trusted, it can
access the secrets and doesn't need approvals to run.
