mirror of
https://github.com/ytdl-org/youtube-dl
synced 2024-08-28 18:05:16 +02:00
compat_urllib_request.Request [downloader/dash] Use sanitized_Request [downloader/http] Use sanitized_Request [atresplayer] Use sanitized_Request [bambuser] Use sanitized_Request [bliptv] Use sanitized_Request [brightcove] Use sanitized_Request [cbs] Use sanitized_Request [ceskatelevize] Use sanitized_Request [collegerama] Use sanitized_Request [extractor/common] Use sanitized_Request [crunchyroll] Use sanitized_Request [dailymotion] Use sanitized_Request [dcn] Use sanitized_Request [dramafever] Use sanitized_Request [dumpert] Use sanitized_Request [eitb] Use sanitized_Request [escapist] Use sanitized_Request [everyonesmixtape] Use sanitized_Request [extremetube] Use sanitized_Request [facebook] Use sanitized_Request [fc2] Use sanitized_Request [flickr] Use sanitized_Request [4tube] Use sanitized_Request [gdcvault] Use sanitized_Request [extractor/generic] Use sanitized_Request [hearthisat] Use sanitized_Request [hotnewhiphop] Use sanitized_Request [hypem] Use sanitized_Request [iprima] Use sanitized_Request [ivi] Use sanitized_Request [keezmovies] Use sanitized_Request [letv] Use sanitized_Request [lynda] Use sanitized_Request [metacafe] Use sanitized_Request [minhateca] Use sanitized_Request [miomio] Use sanitized_Request [meovideo] Use sanitized_Request [mofosex] Use sanitized_Request [moniker] Use sanitized_Request [mooshare] Use sanitized_Request [movieclips] Use sanitized_Request [mtv] Use sanitized_Request [myvideo] Use sanitized_Request [neteasemusic] Use sanitized_Request [nfb] Use sanitized_Request [niconico] Use sanitized_Request [noco] Use sanitized_Request [nosvideo] Use sanitized_Request [novamov] Use sanitized_Request [nowness] Use sanitized_Request [nuvid] Use sanitized_Request [played] Use sanitized_Request [pluralsight] Use sanitized_Request [pornhub] Use sanitized_Request [pornotube] Use sanitized_Request [primesharetv] Use sanitized_Request [promptfile] Use sanitized_Request [qqmusic] Use sanitized_Request [rtve] Use sanitized_Request [safari] Use sanitized_Request [sandia] Use sanitized_Request [shared] Use sanitized_Request [sharesix] Use sanitized_Request [sina] Use sanitized_Request [smotri] Use sanitized_Request [sohu] Use sanitized_Request [spankwire] Use sanitized_Request [sportdeutschland] Use sanitized_Request [streamcloud] Use sanitized_Request [streamcz] Use sanitized_Request [tapely] Use sanitized_Request [tube8] Use sanitized_Request [tubitv] Use sanitized_Request [twitch] Use sanitized_Request [twitter] Use sanitized_Request [udemy] Use sanitized_Request [vbox7] Use sanitized_Request [veoh] Use sanitized_Request [vessel] Use sanitized_Request [vevo] Use sanitized_Request [viddler] Use sanitized_Request [videomega] Use sanitized_Request [viewvster] Use sanitized_Request [viki] Use sanitized_Request [vk] Use sanitized_Request [vodlocker] Use sanitized_Request [voicerepublic] Use sanitized_Request [wistia] Use sanitized_Request [xfileshare] Use sanitized_Request [xtube] Use sanitized_Request [xvideos] Use sanitized_Request [yandexmusic] Use sanitized_Request [youku] Use sanitized_Request [youporn] Use sanitized_Request [youtube] Use sanitized_Request [patreon] Use sanitized_Request [extractor/common] Remove unused import [nfb] PEP 8
252 lines
10 KiB
Python
252 lines
10 KiB
Python
from __future__ import unicode_literals
|
|
|
|
import errno
|
|
import os
|
|
import socket
|
|
import time
|
|
import re
|
|
|
|
from .common import FileDownloader
|
|
from ..compat import compat_urllib_error
|
|
from ..utils import (
|
|
ContentTooShortError,
|
|
encodeFilename,
|
|
sanitize_open,
|
|
sanitized_Request,
|
|
)
|
|
|
|
|
|
class HttpFD(FileDownloader):
|
|
def real_download(self, filename, info_dict):
|
|
url = info_dict['url']
|
|
tmpfilename = self.temp_name(filename)
|
|
stream = None
|
|
|
|
# Do not include the Accept-Encoding header
|
|
headers = {'Youtubedl-no-compression': 'True'}
|
|
add_headers = info_dict.get('http_headers')
|
|
if add_headers:
|
|
headers.update(add_headers)
|
|
basic_request = sanitized_Request(url, None, headers)
|
|
request = sanitized_Request(url, None, headers)
|
|
|
|
is_test = self.params.get('test', False)
|
|
|
|
if is_test:
|
|
request.add_header('Range', 'bytes=0-%s' % str(self._TEST_FILE_SIZE - 1))
|
|
|
|
# Establish possible resume length
|
|
if os.path.isfile(encodeFilename(tmpfilename)):
|
|
resume_len = os.path.getsize(encodeFilename(tmpfilename))
|
|
else:
|
|
resume_len = 0
|
|
|
|
open_mode = 'wb'
|
|
if resume_len != 0:
|
|
if self.params.get('continuedl', True):
|
|
self.report_resuming_byte(resume_len)
|
|
request.add_header('Range', 'bytes=%d-' % resume_len)
|
|
open_mode = 'ab'
|
|
else:
|
|
resume_len = 0
|
|
|
|
count = 0
|
|
retries = self.params.get('retries', 0)
|
|
while count <= retries:
|
|
# Establish connection
|
|
try:
|
|
data = self.ydl.urlopen(request)
|
|
# When trying to resume, Content-Range HTTP header of response has to be checked
|
|
# to match the value of requested Range HTTP header. This is due to a webservers
|
|
# that don't support resuming and serve a whole file with no Content-Range
|
|
# set in response despite of requested Range (see
|
|
# https://github.com/rg3/youtube-dl/issues/6057#issuecomment-126129799)
|
|
if resume_len > 0:
|
|
content_range = data.headers.get('Content-Range')
|
|
if content_range:
|
|
content_range_m = re.search(r'bytes (\d+)-', content_range)
|
|
# Content-Range is present and matches requested Range, resume is possible
|
|
if content_range_m and resume_len == int(content_range_m.group(1)):
|
|
break
|
|
# Content-Range is either not present or invalid. Assuming remote webserver is
|
|
# trying to send the whole file, resume is not possible, so wiping the local file
|
|
# and performing entire redownload
|
|
self.report_unable_to_resume()
|
|
resume_len = 0
|
|
open_mode = 'wb'
|
|
break
|
|
except (compat_urllib_error.HTTPError, ) as err:
|
|
if (err.code < 500 or err.code >= 600) and err.code != 416:
|
|
# Unexpected HTTP error
|
|
raise
|
|
elif err.code == 416:
|
|
# Unable to resume (requested range not satisfiable)
|
|
try:
|
|
# Open the connection again without the range header
|
|
data = self.ydl.urlopen(basic_request)
|
|
content_length = data.info()['Content-Length']
|
|
except (compat_urllib_error.HTTPError, ) as err:
|
|
if err.code < 500 or err.code >= 600:
|
|
raise
|
|
else:
|
|
# Examine the reported length
|
|
if (content_length is not None and
|
|
(resume_len - 100 < int(content_length) < resume_len + 100)):
|
|
# The file had already been fully downloaded.
|
|
# Explanation to the above condition: in issue #175 it was revealed that
|
|
# YouTube sometimes adds or removes a few bytes from the end of the file,
|
|
# changing the file size slightly and causing problems for some users. So
|
|
# I decided to implement a suggested change and consider the file
|
|
# completely downloaded if the file size differs less than 100 bytes from
|
|
# the one in the hard drive.
|
|
self.report_file_already_downloaded(filename)
|
|
self.try_rename(tmpfilename, filename)
|
|
self._hook_progress({
|
|
'filename': filename,
|
|
'status': 'finished',
|
|
'downloaded_bytes': resume_len,
|
|
'total_bytes': resume_len,
|
|
})
|
|
return True
|
|
else:
|
|
# The length does not match, we start the download over
|
|
self.report_unable_to_resume()
|
|
resume_len = 0
|
|
open_mode = 'wb'
|
|
break
|
|
except socket.error as e:
|
|
if e.errno != errno.ECONNRESET:
|
|
# Connection reset is no problem, just retry
|
|
raise
|
|
|
|
# Retry
|
|
count += 1
|
|
if count <= retries:
|
|
self.report_retry(count, retries)
|
|
|
|
if count > retries:
|
|
self.report_error('giving up after %s retries' % retries)
|
|
return False
|
|
|
|
data_len = data.info().get('Content-length', None)
|
|
|
|
# Range HTTP header may be ignored/unsupported by a webserver
|
|
# (e.g. extractor/scivee.py, extractor/bambuser.py).
|
|
# However, for a test we still would like to download just a piece of a file.
|
|
# To achieve this we limit data_len to _TEST_FILE_SIZE and manually control
|
|
# block size when downloading a file.
|
|
if is_test and (data_len is None or int(data_len) > self._TEST_FILE_SIZE):
|
|
data_len = self._TEST_FILE_SIZE
|
|
|
|
if data_len is not None:
|
|
data_len = int(data_len) + resume_len
|
|
min_data_len = self.params.get("min_filesize", None)
|
|
max_data_len = self.params.get("max_filesize", None)
|
|
if min_data_len is not None and data_len < min_data_len:
|
|
self.to_screen('\r[download] File is smaller than min-filesize (%s bytes < %s bytes). Aborting.' % (data_len, min_data_len))
|
|
return False
|
|
if max_data_len is not None and data_len > max_data_len:
|
|
self.to_screen('\r[download] File is larger than max-filesize (%s bytes > %s bytes). Aborting.' % (data_len, max_data_len))
|
|
return False
|
|
|
|
byte_counter = 0 + resume_len
|
|
block_size = self.params.get('buffersize', 1024)
|
|
start = time.time()
|
|
|
|
# measure time over whole while-loop, so slow_down() and best_block_size() work together properly
|
|
now = None # needed for slow_down() in the first loop run
|
|
before = start # start measuring
|
|
while True:
|
|
|
|
# Download and write
|
|
data_block = data.read(block_size if not is_test else min(block_size, data_len - byte_counter))
|
|
byte_counter += len(data_block)
|
|
|
|
# exit loop when download is finished
|
|
if len(data_block) == 0:
|
|
break
|
|
|
|
# Open destination file just in time
|
|
if stream is None:
|
|
try:
|
|
(stream, tmpfilename) = sanitize_open(tmpfilename, open_mode)
|
|
assert stream is not None
|
|
filename = self.undo_temp_name(tmpfilename)
|
|
self.report_destination(filename)
|
|
except (OSError, IOError) as err:
|
|
self.report_error('unable to open for writing: %s' % str(err))
|
|
return False
|
|
|
|
if self.params.get('xattr_set_filesize', False) and data_len is not None:
|
|
try:
|
|
import xattr
|
|
xattr.setxattr(tmpfilename, 'user.ytdl.filesize', str(data_len))
|
|
except(OSError, IOError, ImportError) as err:
|
|
self.report_error('unable to set filesize xattr: %s' % str(err))
|
|
|
|
try:
|
|
stream.write(data_block)
|
|
except (IOError, OSError) as err:
|
|
self.to_stderr('\n')
|
|
self.report_error('unable to write data: %s' % str(err))
|
|
return False
|
|
|
|
# Apply rate limit
|
|
self.slow_down(start, now, byte_counter - resume_len)
|
|
|
|
# end measuring of one loop run
|
|
now = time.time()
|
|
after = now
|
|
|
|
# Adjust block size
|
|
if not self.params.get('noresizebuffer', False):
|
|
block_size = self.best_block_size(after - before, len(data_block))
|
|
|
|
before = after
|
|
|
|
# Progress message
|
|
speed = self.calc_speed(start, now, byte_counter - resume_len)
|
|
if data_len is None:
|
|
eta = None
|
|
else:
|
|
eta = self.calc_eta(start, time.time(), data_len - resume_len, byte_counter - resume_len)
|
|
|
|
self._hook_progress({
|
|
'status': 'downloading',
|
|
'downloaded_bytes': byte_counter,
|
|
'total_bytes': data_len,
|
|
'tmpfilename': tmpfilename,
|
|
'filename': filename,
|
|
'eta': eta,
|
|
'speed': speed,
|
|
'elapsed': now - start,
|
|
})
|
|
|
|
if is_test and byte_counter == data_len:
|
|
break
|
|
|
|
if stream is None:
|
|
self.to_stderr('\n')
|
|
self.report_error('Did not get any data blocks')
|
|
return False
|
|
if tmpfilename != '-':
|
|
stream.close()
|
|
|
|
if data_len is not None and byte_counter != data_len:
|
|
raise ContentTooShortError(byte_counter, int(data_len))
|
|
self.try_rename(tmpfilename, filename)
|
|
|
|
# Update file modification time
|
|
if self.params.get('updatetime', True):
|
|
info_dict['filetime'] = self.try_utime(filename, data.info().get('last-modified', None))
|
|
|
|
self._hook_progress({
|
|
'downloaded_bytes': byte_counter,
|
|
'total_bytes': byte_counter,
|
|
'filename': filename,
|
|
'status': 'finished',
|
|
'elapsed': time.time() - start,
|
|
})
|
|
|
|
return True
|