;/*++ BUILD Version: 0001 // Increment this if a change has global effects ; ;Copyright (c) 1992, 1993 Microsoft Corporation ; ;Module Name: ; ; ntiologc.h ; ;Abstract: ; ; Constant definitions for the I/O error code log values. ; ;Author: ; ; Tony Ercolano (Tonye) 12-23-1992 ; ;Revision History: ; ;--*/ ; ;#ifndef _PARLOG_ ;#define _PARLOG_ ; ;// ;// Status values are 32 bit values layed out as follows: ;// ;// 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 ;// 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 ;// +---+-+-------------------------+-------------------------------+ ;// |Sev|C| Facility | Code | ;// +---+-+-------------------------+-------------------------------+ ;// ;// where ;// ;// Sev - is the severity code ;// ;// 00 - Success ;// 01 - Informational ;// 10 - Warning ;// 11 - Error ;// ;// C - is the Customer code flag ;// ;// Facility - is the facility code ;// ;// Code - is the facility's status code ;// ; MessageIdTypedef=NTSTATUS SeverityNames=(Success=0x0:STATUS_SEVERITY_SUCCESS Informational=0x1:STATUS_SEVERITY_INFORMATIONAL Warning=0x2:STATUS_SEVERITY_WARNING Error=0x3:STATUS_SEVERITY_ERROR ) FacilityNames=(System=0x0 RpcRuntime=0x2:FACILITY_RPC_RUNTIME RpcStubs=0x3:FACILITY_RPC_STUBS Io=0x4:FACILITY_IO_ERROR_CODE Parallel=0x7:FACILITY_PARALLEL_ERROR_CODE ) MessageId=0x0003 Facility=Parallel Severity=Error SymbolicName=PAR_INSUFFICIENT_RESOURCES Language=English Not enough memory was available to allocate internal storage needed for the device %1. . MessageId=0x0004 Facility=Parallel Severity=Error SymbolicName=PAR_REGISTERS_NOT_MAPPED Language=English The hardware locations for %1 could not be translated to something the memory management system could understand. . MessageId=0x0005 Facility=Parallel Severity=Error SymbolicName=PAR_ADDRESS_CONFLICT Language=English The hardware addresses for %1 are already in use by another device. . MessageId=0x0006 Facility=Parallel Severity=Error SymbolicName=PAR_NOT_ENOUGH_CONFIG_INFO Language=English Some firmware configuration information was incomplete. . MessageId=0x000D Facility=Parallel Severity=Informational SymbolicName=PAR_USER_OVERRIDE Language=English User configuration data is overriding firmware configuration data. . MessageId=0x000E Facility=Parallel Severity=Error SymbolicName=PAR_DEVICE_TOO_HIGH Language=English The user specified port is way too high in physical memory. . MessageId=0x000F Facility=Parallel Severity=Error SymbolicName=PAR_CONTROL_OVERLAP Language=English The control registers for the port overlaps with a previous ports control registers. . MessageId=0x0013 Facility=Parallel Severity=Informational SymbolicName=PAR_DISABLED_PORT Language=English Disabling port %1 as requested by the configuration data. . MessageId=0x0014 Facility=Parallel Severity=Warning SymbolicName=PAR_INTERRUPT_CONFLICT Language=English Interrupt conflict detected for %1. . ;#endif /* _NTIOLOGC_ */