/*++ Copyright (c) 1993 Weitek Corporation Module Name: viper.c Abstract: This module contains OEM specific functions for the Diamond Viper board. Environment: Kernel mode Revision History may be found at the end of this file. --*/ #include "p9.h" #include "p9gbl.h" #include "p9000.h" #include "viper.h" #include "vga.h" #include "p9errlog.h" #define REJECT_ON_BIOS_VERSION 0 // // OEM specific static data. // // // This structure is used to match the possible physical address // mappings with the value to be written to the sequencer control // register. typedef struct { PHYSICAL_ADDRESS BaseMemAddr; USHORT RegValue; } MEM_RANGE; MEM_RANGE ViperMemRange[] = { { 0x0A0000000, 0L, MEM_AXXX }, { 0x080000000, 0L, MEM_8XXX }, { 0x020000000, 0L, MEM_2XXX }, { 0x01D000000, 0L, MEM_AXXX } }; LONG NumMemRanges = sizeof(ViperMemRange) / sizeof(MEM_RANGE); #ifdef REJECT_ON_BIOS_VERSION /*++ ** bRejectOnBiosVersion * * FILENAME: D:\nt351.nc\weitek\p9x\mini\viper.c * * PARAMETERS: PHW_DEVICE_EXTENSION HwDeviceExtension * PUCHAR pjBios linear address of the BIOS * ULONG ulBiosLength lengh of the BIOS * * DESCRIPTION: Scan the Bios, * * RETURNS: TRUE to reject supporting this card. * FALSE to support this card. * * --*/ BOOLEAN bRejectOnBiosVersion( PHW_DEVICE_EXTENSION HwDeviceExtension, PUCHAR pjBiosAddr, ULONG ulBiosLength) { // Add the strings you want to detect for rejection to this array static PUCHAR aszBiosVersion[] = { "VIPER VLB Vers. 1", "VIPER VLB Vers. 2", NULL }; LONG i; BOOLEAN bFound = FALSE; for (i = 0; aszBiosVersion[i] != 0; i++) { if (VideoPortScanRom(HwDeviceExtension, (PUCHAR) pjBiosAddr, VGA_BIOS_LEN, aszBiosVersion[i])) { bFound = TRUE; break; } } if (bFound == TRUE) { VideoPortLogError(HwDeviceExtension, NULL, P9_DOWN_LEVEL_BIOS, i); VideoDebugPrint((0, "P9X - Down Level Bios\n")); } // We will always boot, we'll just warn the user that bad things may happen return (FALSE); } #endif // REJECT_ON_BIOS_VERSION BOOLEAN ViperGetBaseAddr( PHW_DEVICE_EXTENSION HwDeviceExtension ) /*++ Routine Description: Perform board detection and if present return the P9000 base address. Arguments: HwDeviceExtension - Pointer to the miniport driver's device extension. Return Value: TRUE - Board found, P9 and Frame buffer address info was placed in the device extension. FALSE - Board not found. --*/ { VP_STATUS status; SHORT i; ULONG ulBiosAddr; BOOLEAN bValid = FALSE; VIDEO_ACCESS_RANGE BiosAccessRange = { VGA_BIOS_ADDR, // Low address 0x00000000, // Hi address VGA_BIOS_LEN, // length 0, // Is range in i/o space? 1, // Range should be visible 1 // Range should be shareable }; if (HwDeviceExtension->MachineType == SIEMENS_P9100_VLB) return FALSE; // // Determine if a Viper card is installed by scanning the VGA BIOS ROM // memory space. // // // Map in the BIOS' memory space. If it can't be mapped, // return an error. // if (HwDeviceExtension->MachineType == SIEMENS) { BiosAccessRange.RangeStart.LowPart += 0x10000000L; } if (VideoPortVerifyAccessRanges(HwDeviceExtension, 1, &BiosAccessRange) != NO_ERROR) { return(FALSE); } if ((ulBiosAddr = (ULONG) VideoPortGetDeviceBase(HwDeviceExtension, BiosAccessRange.RangeStart, BiosAccessRange.RangeLength, FALSE)) == 0) { return(FALSE); } if (!VideoPortScanRom(HwDeviceExtension, (PUCHAR) ulBiosAddr, VGA_BIOS_LEN, VIPER_VL_ID_STR)) { VideoPortFreeDeviceBase(HwDeviceExtension, (PVOID) ulBiosAddr); return(FALSE); } #ifdef REJECT_ON_BIOS_VERSION if (bRejectOnBiosVersion(HwDeviceExtension, (PUCHAR) ulBiosAddr, VGA_BIOS_LEN)) return (FALSE); #endif // REJECT_ON_BIOS_VERSION VideoPortFreeDeviceBase(HwDeviceExtension, (PVOID) ulBiosAddr); // // For now, pretend we have a Weitek 5x86 VGA. Later we may call the // Viper BIOS to determine which type of BIOS is installed. // HwDeviceExtension->AdapterDesc.bWtk5x86 = TRUE; // // Copy the DAC register access ranges to the global access range // structure. // VideoPortMoveMemory(&DriverAccessRanges[NUM_DRIVER_ACCESS_RANGES], VLDefDACRegRange, HwDeviceExtension->Dac.cDacRegs * sizeof(VIDEO_ACCESS_RANGE)); // // A value for the P9 base address may have beens found in the registry, // and it is now stored in the device extension. Ensure the address // value is valid for the Viper card. Then use it to compute // the starting address of the P9000 registers and frame buffer, // and store it in the device extension. // for (i = 0; i < NumMemRanges; i++) { if (HwDeviceExtension->P9PhysAddr.LowPart == ViperMemRange[i].BaseMemAddr.LowPart) { bValid = TRUE; break; } } // // If the address value is invalid, or was not found in the registry, // use the default. // if (!bValid) { HwDeviceExtension->P9PhysAddr.LowPart = MemBase; } return(TRUE); } VOID ViperEnableP9( PHW_DEVICE_EXTENSION HwDeviceExtension ) /*++ Routine Description: Perform the OEM specific tasks necessary to enable the P9000. These include memory mapping, setting the sync polarities, and enabling the P9000 video output. Arguments: HwDeviceExtension - Pointer to the miniport driver's device extension. Return Value: None. --*/ { USHORT holdit; // // Select external frequency. // VGA_WR_REG(MISCOUT, VGA_RD_REG(MISCIN) | (MISCD | MISCC)); // // If this is a Weitek VGA, unlock it. // if (HwDeviceExtension->AdapterDesc.bWtk5x86) { UnlockVGARegs(HwDeviceExtension); } VGA_WR_REG(SEQ_INDEX_PORT, SEQ_OUTCNTL_INDEX); holdit = VGA_RD_REG(SEQ_DATA_PORT); // // Set the sync polarity. First clear the sync polarity bits. // holdit &= ~POL_MASK; // // Viper controls h and v sync polarities independently. Set the // vertical sync polarity. // if (HwDeviceExtension->VideoData.vp == POSITIVE) { holdit |= VSYNC_POL_MASK; } // // Disable VGA video output. // holdit &= VGA_VIDEO_DIS; if (HwDeviceExtension->VideoData.hp == POSITIVE) { holdit |= HSYNC_POL_MASK; } holdit |= P9_VIDEO_ENB; VGA_WR_REG(SEQ_DATA_PORT, holdit); // // If this is a Weitek VGA, lock it. // if (HwDeviceExtension->AdapterDesc.bWtk5x86) { LockVGARegs(HwDeviceExtension); } return; } BOOLEAN ViperDisableP9( PHW_DEVICE_EXTENSION HwDeviceExtension ) /*++ Routine Description: Arguments: HwDeviceExtension - Pointer to the miniport driver's device extension. pPal - Pointer to the array of pallete entries. StartIndex - Specifies the first pallete entry provided in pPal. Count - Number of palette entries in pPal Return Value: TRUE, indicating *no* int10 is needed to complete the switch --*/ { USHORT holdit; // // If this is a Weitek VGA, unlock it. // if (HwDeviceExtension->AdapterDesc.bWtk5x86) { UnlockVGARegs(HwDeviceExtension); } VGA_WR_REG(SEQ_INDEX_PORT, SEQ_OUTCNTL_INDEX); holdit = VGA_RD_REG(SEQ_DATA_PORT); // // Disable P9000 video output. // holdit &= P9_VIDEO_DIS; // // VGA output enable is a seperate register bit for the Viper board. // holdit |= VGA_VIDEO_ENB; VGA_WR_REG(SEQ_INDEX_PORT, SEQ_OUTCNTL_INDEX); VGA_WR_REG(SEQ_DATA_PORT, holdit); // // Restore clock select bits. // VGA_WR_REG(MISCOUT, HwDeviceExtension->MiscRegState); // // If this is a Weitek VGA, lock it. // if (HwDeviceExtension->AdapterDesc.bWtk5x86) { LockVGARegs(HwDeviceExtension); } return TRUE; } BOOLEAN ViperEnableMem( PHW_DEVICE_EXTENSION HwDeviceExtension ) /*++ Routine Description: Enables the P9000 memory at the physical base address stored in the device extension. Arguments: HwDeviceExtension - Pointer to the miniport driver's device extension. Return Value: None. --*/ { USHORT holdit; SHORT i; // // If this is a Weitek VGA, unlock it. // if (HwDeviceExtension->AdapterDesc.bWtk5x86) { UnlockVGARegs(HwDeviceExtension); } // // Read the contents of the sequencer memory address register. // VGA_WR_REG(SEQ_INDEX_PORT, SEQ_OUTCNTL_INDEX); holdit = VGA_RD_REG(SEQ_DATA_PORT); // // Clear out any address bits which are set. // holdit &= ADDR_SLCT_MASK; // // Map the P9000 to the address specified in the device extension. // for (i = 0; i < NumMemRanges; i++ ) { if (ViperMemRange[i].BaseMemAddr.LowPart == HwDeviceExtension->P9PhysAddr.LowPart) { holdit |= ViperMemRange[i].RegValue; break; } } VGA_WR_REG(SEQ_DATA_PORT, holdit); // // If this is a Weitek VGA, lock it. // if (HwDeviceExtension->AdapterDesc.bWtk5x86) { LockVGARegs(HwDeviceExtension); } return(TRUE); } VOID ViperSetMode( PHW_DEVICE_EXTENSION HwDeviceExtension ) /*++ Routine Description: This routine sets the video mode. Different OEM adapter implementations require that initialization operations be performed in a certain order. This routine uses the standard order which addresses most implementations (Viper VL and VIPER PCI). Arguments: HwDeviceExtension - Pointer to the miniport driver's device extension. Return Value: None. --*/ { // // Save the value in the VGA's Misc Output register. // HwDeviceExtension->MiscRegState = VGA_RD_REG(MISCIN); // // Enable the Vipers Memory Map. // HwDeviceExtension->AdapterDesc.P9EnableMem(HwDeviceExtension); // // Enable P9000 video. // HwDeviceExtension->AdapterDesc.P9EnableVideo(HwDeviceExtension); // // Initialize the DAC. // HwDeviceExtension->Dac.DACInit(HwDeviceExtension); // // Set the dot clock. // DevSetClock(HwDeviceExtension, (USHORT) HwDeviceExtension->VideoData.dotfreq1, FALSE, TRUE); // // If this mode uses the palette, clear it to all 0s. // if (P9Modes[HwDeviceExtension->CurrentModeNumber].modeInformation.AttributeFlags && VIDEO_MODE_PALETTE_DRIVEN) { HwDeviceExtension->Dac.DACClearPalette(HwDeviceExtension); } }