Microsoft/NT4
Microsoft/NT4
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
master
NT4/private/ntos/dd/parclass/parclass.c
Microsoft ce47f986d8 First commit
2020-09-30 17:12:29 +02:00

4118 lines
104 KiB
C
Raw Permalink Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/*++
Copyright (c) 1993 Microsoft Corporation
Module Name:
parclass.c
Abstract:
This module contains the code for the parallel class driver.
Author:
Anthony V. Ercolano 1-Aug-1992
Norbert P. Kusters 22-Oct-1993
Environment:
Kernel mode
Revision History :
--*/
#include "ntddk.h"
#include "ntddser.h"
#include "parallel.h"
#include "parclass.h"
#include "parlog.h"
#ifdef POOL_TAGGING
#ifdef ExAllocatePool
#undef ExAllocatePool
#endif
#define ExAllocatePool(a,b) ExAllocatePoolWithTag(a,b,'CraP')
#endif
//
// This is the actual definition of ParDebugLevel.
// Note that it is only defined if this is a "debug"
// build.
//
#if DBG
extern ULONG ParDebugLevel = 0;
#endif
static const PHYSICAL_ADDRESS PhysicalZero = {0};
//
// Give a timeout of 300 seconds. Some postscript printers will
// buffer up a lot of commands then proceed to render what they
// have. The printer will then refuse to accept any characters
// until it's done with the rendering. This render process can
// take a while. We'll give it 300 seconds.
//
// Note that an application can change this value.
//
#define PAR_WRITE_TIMEOUT_VALUE 300
//
// Busy, PE
//
#define PAR_PAPER_EMPTY( Status ) ( \
(Status & PAR_STATUS_PE) )
#ifdef JAPAN // IBM-J printers
//
// Support for IBM-J printers.
//
// When the printer operates in Japanese (PS55) mode, it redefines
// the meaning of parallel lines so that extended error status can
// be reported. It is roughly compatible with PC/AT, but we have to
// take care of a few cases where the status looks like PC/AT error
// condition.
//
// Status Busy /AutoFdXT Paper Empty Select /Fault
// ------ ---- --------- ----------- ------ ------
// Not RMR 1 1 1 1 1
// Head Alarm 1 1 1 1 0
// ASF Jam 1 1 1 0 0
// Paper Empty 1 0 1 0 0
// No Error 0 0 0 1 1
// Can Req 1 0 0 0 1
// Deselect 1 0 0 0 0
//
// The printer keeps "Not RMR" during the parallel port
// initialization, then it takes "Paper Empty", "No Error"
// or "Deselect". Other status can be thought as an
// H/W error condition.
//
// Namely, "Not RMR" conflicts with PAR_NO_CABLE and "Deselect"
// should also be regarded as another PAR_OFF_LINE. When the
// status is PAR_PAPER_EMPTY, the initialization is finished
// (we should not send init purlse again.)
//
// See ParInitializeDevice() for more information.
//
// [takashim]
#define PAR_OFF_LINE_COMMON( Status ) ( \
(Status & PAR_STATUS_NOT_ERROR) && \
((Status & PAR_STATUS_NOT_BUSY) ^ PAR_STATUS_NOT_BUSY) && \
!(Status & PAR_STATUS_SLCT) )
#define PAR_OFF_LINE_IBM55( Status ) ( \
((Status & PAR_STATUS_NOT_BUSY) ^ PAR_STATUS_NOT_BUSY) && \
((Status & PAR_STATUS_PE) ^ PAR_STATUS_PE) && \
((Status & PAR_STATUS_SLCT) ^ PAR_STATUS_SLCT) && \
((Status & PAR_STATUS_NOT_ERROR) ^ PAR_STATUS_NOT_ERROR))
#define PAR_PAPER_EMPTY2( Status ) ( \
((Status & PAR_STATUS_NOT_BUSY) ^ PAR_STATUS_NOT_BUSY) && \
(Status & PAR_STATUS_PE) && \
((Status & PAR_STATUS_SLCT) ^ PAR_STATUS_SLCT) && \
((Status & PAR_STATUS_NOT_ERROR) ^ PAR_STATUS_NOT_ERROR))
//
// Redefine this for Japan.
//
#define PAR_OFF_LINE( Status ) ( \
PAR_OFF_LINE_COMMON( Status ) || \
PAR_OFF_LINE_IBM55( Status ))
#else // JAPAN
//
// Busy, not select, not error
//
#define PAR_OFF_LINE( Status ) ( \
(Status & PAR_STATUS_NOT_ERROR) && \
((Status & PAR_STATUS_NOT_BUSY) ^ PAR_STATUS_NOT_BUSY) && \
!(Status & PAR_STATUS_SLCT) )
#endif // JAPAN
//
// error, ack, not busy
//
#define PAR_POWERED_OFF( Status ) ( \
((Status & PAR_STATUS_NOT_ERROR) ^ PAR_STATUS_NOT_ERROR) && \
((Status & PAR_STATUS_NOT_ACK) ^ PAR_STATUS_NOT_ACK) && \
(Status & PAR_STATUS_NOT_BUSY))
//
// not error, not busy, not select
//
#define PAR_NOT_CONNECTED( Status ) ( \
(Status & PAR_STATUS_NOT_ERROR) && \
(Status & PAR_STATUS_NOT_BUSY) &&\
!(Status & PAR_STATUS_SLCT) )
//
// not error, not busy
//
#define PAR_OK(Status) ( \
(Status & PAR_STATUS_NOT_ERROR) && \
((Status & PAR_STATUS_PE) ^ PAR_STATUS_PE) && \
(Status & PAR_STATUS_NOT_BUSY) )
//
// busy, select, not error
//
#define PAR_POWERED_ON(Status) ( \
((Status & PAR_STATUS_NOT_BUSY) ^ PAR_STATUS_NOT_BUSY) && \
(Status & PAR_STATUS_SLCT) && \
(Status & PAR_STATUS_NOT_ERROR))
//
// busy, not error
//
#define PAR_BUSY(Status) (\
(( Status & PAR_STATUS_NOT_BUSY) ^ PAR_STATUS_NOT_BUSY) && \
( Status & PAR_STATUS_NOT_ERROR ) )
//
// selected
//
#define PAR_SELECTED(Status) ( \
( Status & PAR_STATUS_SLCT ) )
//
// No cable attached.
//
#define PAR_NO_CABLE(Status) ( \
((Status & PAR_STATUS_NOT_BUSY) ^ PAR_STATUS_NOT_BUSY) && \
(Status & PAR_STATUS_NOT_ACK) && \
(Status & PAR_STATUS_PE) && \
(Status & PAR_STATUS_SLCT) && \
(Status & PAR_STATUS_NOT_ERROR))
NTSTATUS
DriverEntry(
IN PDRIVER_OBJECT DriverObject,
IN PUNICODE_STRING RegistryPath
);
VOID
ParLogError(
IN PDRIVER_OBJECT DriverObject,
IN PDEVICE_OBJECT DeviceObject OPTIONAL,
IN PHYSICAL_ADDRESS P1,
IN PHYSICAL_ADDRESS P2,
IN ULONG SequenceNumber,
IN UCHAR MajorFunctionCode,
IN UCHAR RetryCount,
IN ULONG UniqueErrorValue,
IN NTSTATUS FinalStatus,
IN NTSTATUS SpecificIOStatus
);
BOOLEAN
ParMakeNames(
IN ULONG ParallelPortNumber,
OUT PUNICODE_STRING PortName,
OUT PUNICODE_STRING ClassName,
OUT PUNICODE_STRING LinkName
);
VOID
ParInitializeClassDevice(
IN PDRIVER_OBJECT DriverObject,
IN PUNICODE_STRING RegistryPath,
IN ULONG ParallelPortNumber
);
NTSTATUS
ParGetPortInfoFromPortDevice(
IN OUT PDEVICE_EXTENSION Extension
);
VOID
ParDeferDeviceInitialization(
IN OUT PDEVICE_EXTENSION Extension
);
VOID
ParDeferredInitCallback(
IN OUT PVOID Context
);
VOID
ParCheckParameters(
IN PUNICODE_STRING RegistryPath,
IN OUT PDEVICE_EXTENSION Extension
);
UCHAR
ParReinitializeDevice(
IN PDEVICE_EXTENSION Extension
);
UCHAR
ParInitializeDevice(
IN PDEVICE_EXTENSION Extension
);
VOID
ParNotInitError(
IN PDEVICE_EXTENSION Extension,
IN UCHAR deviceStatus
);
VOID
ParFreePort(
IN PDEVICE_EXTENSION Extension
);
ULONG
ParCheckBusyDelay(
IN PDEVICE_EXTENSION Extension,
IN PUCHAR WriteBuffer,
IN ULONG NumBytesToWrite
);
VOID
ParWriteOutData(
PDEVICE_EXTENSION Extension
);
UCHAR
ParManageIoDevice(
IN PDEVICE_EXTENSION Extension,
OUT PUCHAR Status,
OUT PUCHAR Control
);
VOID
ParStartIo(
IN PDEVICE_EXTENSION Extension
);
VOID
ParallelThread(
IN PVOID Context
);
NTSTATUS
ParCreateSystemThread(
PDEVICE_EXTENSION Extension
);
VOID
ParCancelRequest(
PDEVICE_OBJECT DeviceObject,
PIRP Irp
);
NTSTATUS
ParAllocPortCompletionRoutine(
IN PDEVICE_OBJECT DeviceObject,
IN PIRP Irp,
IN PVOID Context
);
BOOLEAN
ParAllocPort(
IN PDEVICE_EXTENSION Extension
);
VOID
ParReleasePortInfoToPortDevice(
IN PDEVICE_EXTENSION Extension
);
#ifdef ALLOC_PRAGMA
#pragma alloc_text(INIT,DriverEntry)
#pragma alloc_text(INIT,ParMakeNames)
#pragma alloc_text(INIT,ParInitializeClassDevice)
#pragma alloc_text(INIT,ParCheckParameters)
#endif
//
// Keep track of OPEN and CLOSE.
//
ULONG OpenCloseReferenceCount = 1;
PFAST_MUTEX OpenCloseMutex = NULL;
#define ParClaimDriver() \
ExAcquireFastMutex(OpenCloseMutex); \
if(++OpenCloseReferenceCount == 1) { \
MmResetDriverPaging(DriverEntry); \
} \
ExReleaseFastMutex(OpenCloseMutex); \
#define ParReleaseDriver() \
ExAcquireFastMutex(OpenCloseMutex); \
if(--OpenCloseReferenceCount == 0) { \
MmPageEntireDriver(DriverEntry); \
} \
ExReleaseFastMutex(OpenCloseMutex); \
NTSTATUS
DriverEntry(
IN PDRIVER_OBJECT DriverObject,
IN PUNICODE_STRING RegistryPath
)
/*++
Routine Description:
This routine is called at system initialization time to initialize
this driver.
Arguments:
DriverObject - Supplies the driver object.
RegistryPath - Supplies the registry path for this driver.
Return Value:
STATUS_SUCCESS - We could initialize at least one device.
STATUS_NO_SUCH_DEVICE - We could not initialize even one device.
--*/
{
ULONG i;
//
// allocate the mutex to protect driver reference count
//
OpenCloseMutex = ExAllocatePool(NonPagedPool, sizeof(FAST_MUTEX));
if (!OpenCloseMutex) {
//
// NOTE - we could probably do without bailing here and just
// leave a note for ourselves to never page out, but since we
// don't have enough memory to allocate a mutex we should probably
// avoid leaving the driver paged in at all times
//
return STATUS_INSUFFICIENT_RESOURCES;
}
ExInitializeFastMutex(OpenCloseMutex);
for (i = 0; i < IoGetConfigurationInformation()->ParallelCount; i++) {
ParInitializeClassDevice(DriverObject, RegistryPath, i);
}
if (!DriverObject->DeviceObject) {
return STATUS_NO_SUCH_DEVICE;
}
//
// Initialize the Driver Object with driver's entry points
//
DriverObject->MajorFunction[IRP_MJ_CREATE] = ParCreateOpen;
DriverObject->MajorFunction[IRP_MJ_CLOSE] = ParClose;
DriverObject->MajorFunction[IRP_MJ_CLEANUP] = ParCleanup;
DriverObject->MajorFunction[IRP_MJ_READ] = ParReadWrite;
DriverObject->MajorFunction[IRP_MJ_WRITE] = ParReadWrite;
DriverObject->MajorFunction[IRP_MJ_DEVICE_CONTROL] = ParDeviceControl;
DriverObject->MajorFunction[IRP_MJ_QUERY_INFORMATION] =
ParQueryInformationFile;
DriverObject->MajorFunction[IRP_MJ_SET_INFORMATION] =
ParSetInformationFile;
DriverObject->DriverUnload = ParUnload;
//
// page out the driver if we can
//
ParReleaseDriver();
return STATUS_SUCCESS;
}
VOID
ParLogError(
IN PDRIVER_OBJECT DriverObject,
IN PDEVICE_OBJECT DeviceObject OPTIONAL,
IN PHYSICAL_ADDRESS P1,
IN PHYSICAL_ADDRESS P2,
IN ULONG SequenceNumber,
IN UCHAR MajorFunctionCode,
IN UCHAR RetryCount,
IN ULONG UniqueErrorValue,
IN NTSTATUS FinalStatus,
IN NTSTATUS SpecificIOStatus
)
/*++
Routine Description:
This routine allocates an error log entry, copies the supplied data
to it, and requests that it be written to the error log file.
Arguments:
DriverObject - Supplies a pointer to the driver object for the
device.
DeviceObject - Supplies a pointer to the device object associated
with the device that had the error, early in
initialization, one may not yet exist.
P1,P2 - Supplies the physical addresses for the controller
ports involved with the error if they are available
and puts them through as dump data.
SequenceNumber - Supplies a ulong value that is unique to an IRP over
the life of the irp in this driver - 0 generally
means an error not associated with an irp.
MajorFunctionCode - Supplies the major function code of the irp if there
is an error associated with it.
RetryCount - Supplies the number of times a particular operation
has been retried.
UniqueErrorValue - Supplies a unique long word that identifies the
particular call to this function.
FinalStatus - Supplies the final status given to the irp that was
associated with this error. If this log entry is
being made during one of the retries this value
will be STATUS_SUCCESS.
SpecificIOStatus - Supplies the IO status for this particular error.
Return Value:
None.
--*/
{
PIO_ERROR_LOG_PACKET errorLogEntry;
PVOID objectToUse;
SHORT dumpToAllocate;
if (ARGUMENT_PRESENT(DeviceObject)) {
objectToUse = DeviceObject;
} else {
objectToUse = DriverObject;
}
dumpToAllocate = 0;
if (P1.LowPart != 0 || P1.HighPart != 0) {
dumpToAllocate = (SHORT) sizeof(PHYSICAL_ADDRESS);
}
if (P2.LowPart != 0 || P2.HighPart != 0) {
dumpToAllocate += (SHORT) sizeof(PHYSICAL_ADDRESS);
}
errorLogEntry = IoAllocateErrorLogEntry(objectToUse,
(UCHAR) (sizeof(IO_ERROR_LOG_PACKET) + dumpToAllocate));
if (!errorLogEntry) {
return;
}
errorLogEntry->ErrorCode = SpecificIOStatus;
errorLogEntry->SequenceNumber = SequenceNumber;
errorLogEntry->MajorFunctionCode = MajorFunctionCode;
errorLogEntry->RetryCount = RetryCount;
errorLogEntry->UniqueErrorValue = UniqueErrorValue;
errorLogEntry->FinalStatus = FinalStatus;
errorLogEntry->DumpDataSize = dumpToAllocate;
if (dumpToAllocate) {
RtlCopyMemory(errorLogEntry->DumpData, &P1, sizeof(PHYSICAL_ADDRESS));
if (dumpToAllocate > sizeof(PHYSICAL_ADDRESS)) {
RtlCopyMemory(((PUCHAR) errorLogEntry->DumpData) +
sizeof(PHYSICAL_ADDRESS), &P2,
sizeof(PHYSICAL_ADDRESS));
}
}
IoWriteErrorLogEntry(errorLogEntry);
}
BOOLEAN
ParMakeNames(
IN ULONG ParallelPortNumber,
OUT PUNICODE_STRING PortName,
OUT PUNICODE_STRING ClassName,
OUT PUNICODE_STRING LinkName
)
/*++
Routine Description:
This routine generates the names \Device\ParallelPortN,
\Device\ParallelN, and \DosDevices\LPT(N+1) where N is
'ParallelPortNumber'. This routine will allocate pool
so that the buffers of these unicode strings need to
be eventually freed.
Arguments:
ParallelPortNumber - Supplies the port number.
PortName - Returns the port name.
ClassName - Returns the class name.
LinkName - Returns the link name.
Return Value:
FALSE - Failure.
TRUE - Success.
--*/
{
UNICODE_STRING prefix, digits, linkPrefix, linkDigits;
WCHAR digitsBuffer[10], linkDigitsBuffer[10];
UNICODE_STRING portSuffix, classSuffix, linkSuffix;
NTSTATUS status;
// Put together local variables for constructing names.
RtlInitUnicodeString(&prefix, L"\\Device\\");
RtlInitUnicodeString(&linkPrefix, L"\\DosDevices\\");
RtlInitUnicodeString(&portSuffix, DD_PARALLEL_PORT_BASE_NAME_U);
RtlInitUnicodeString(&classSuffix, DEFAULT_NT_SUFFIX);
RtlInitUnicodeString(&linkSuffix, DEFAULT_PARALLEL_NAME);
digits.Length = 0;
digits.MaximumLength = 20;
digits.Buffer = digitsBuffer;
linkDigits.Length = 0;
linkDigits.MaximumLength = 20;
linkDigits.Buffer = linkDigitsBuffer;
status = RtlIntegerToUnicodeString(ParallelPortNumber, 10, &digits);
if (!NT_SUCCESS(status)) {
return FALSE;
}
status = RtlIntegerToUnicodeString(ParallelPortNumber + 1, 10, &linkDigits);
if (!NT_SUCCESS(status)) {
return FALSE;
}
// Make the port name.
PortName->Length = 0;
PortName->MaximumLength = prefix.Length + portSuffix.Length +
digits.Length + sizeof(WCHAR);
PortName->Buffer = ExAllocatePool(PagedPool, PortName->MaximumLength);
if (!PortName->Buffer) {
return FALSE;
}
RtlZeroMemory(PortName->Buffer, PortName->MaximumLength);
RtlAppendUnicodeStringToString(PortName, &prefix);
RtlAppendUnicodeStringToString(PortName, &portSuffix);
RtlAppendUnicodeStringToString(PortName, &digits);
// Make the class name.
ClassName->Length = 0;
ClassName->MaximumLength = prefix.Length + classSuffix.Length +
digits.Length + sizeof(WCHAR);
ClassName->Buffer = ExAllocatePool(PagedPool, ClassName->MaximumLength);
if (!ClassName->Buffer) {
ExFreePool(PortName->Buffer);
return FALSE;
}
RtlZeroMemory(ClassName->Buffer, ClassName->MaximumLength);
RtlAppendUnicodeStringToString(ClassName, &prefix);
RtlAppendUnicodeStringToString(ClassName, &classSuffix);
RtlAppendUnicodeStringToString(ClassName, &digits);
// Make the link name.
LinkName->Length = 0;
LinkName->MaximumLength = linkPrefix.Length + linkSuffix.Length +
linkDigits.Length + sizeof(WCHAR);
LinkName->Buffer = ExAllocatePool(PagedPool, LinkName->MaximumLength);
if (!LinkName->Buffer) {
ExFreePool(PortName->Buffer);
ExFreePool(ClassName->Buffer);
return FALSE;
}
RtlZeroMemory(LinkName->Buffer, LinkName->MaximumLength);
RtlAppendUnicodeStringToString(LinkName, &linkPrefix);
RtlAppendUnicodeStringToString(LinkName, &linkSuffix);
RtlAppendUnicodeStringToString(LinkName, &linkDigits);
return TRUE;
}
VOID
ParInitializeClassDevice(
IN PDRIVER_OBJECT DriverObject,
IN PUNICODE_STRING RegistryPath,
IN ULONG ParallelPortNumber
)
/*++
Routine Description:
This routine is called for every parallel port in the system. It
will create a class device upon connecting to the port device
corresponding to it.
Arguments:
DriverObject - Supplies the driver object.
RegistryPath - Supplies the registry path.
ParallelPortNumber - Supplies the number for this port.
Return Value:
None.
--*/
{
UNICODE_STRING portName, className, linkName;
NTSTATUS status;
PDEVICE_OBJECT deviceObject;
PDEVICE_EXTENSION extension;
//
// Cobble together the port, class, and windows symbolic names.
//
if (!ParMakeNames(ParallelPortNumber, &portName, &className, &linkName)) {
ParLogError(DriverObject, NULL, PhysicalZero, PhysicalZero, 0, 0, 0, 1,
STATUS_SUCCESS, PAR_INSUFFICIENT_RESOURCES);
ParDump(
PARERRORS,
("PARALLEL: Could not form Unicode name string.\n")
);
return;
}
// Create the device object.
status = IoCreateDevice(DriverObject, sizeof(DEVICE_EXTENSION),
&className, FILE_DEVICE_PARALLEL_PORT, 0, TRUE,
&deviceObject);
if (!NT_SUCCESS(status)) {
ParLogError(DriverObject, NULL, PhysicalZero, PhysicalZero, 0, 0, 0, 2,
STATUS_SUCCESS, PAR_INSUFFICIENT_RESOURCES);
ParDump(
PARERRORS,
("PARALLEL: Could not create a device for %wZ\n",
&className)
);
ExFreePool(linkName.Buffer);
goto Cleanup;
}
// Now that the device has been created,
// set up the device extension.
extension = deviceObject->DeviceExtension;
RtlZeroMemory(extension, sizeof(DEVICE_EXTENSION));
extension->DeviceObject = deviceObject;
deviceObject->Flags |= DO_BUFFERED_IO;
status = IoGetDeviceObjectPointer(&portName, FILE_READ_ATTRIBUTES,
&extension->PortDeviceFileObject,
&extension->PortDeviceObject);
if (!NT_SUCCESS(status)) {
ParLogError(DriverObject, NULL, PhysicalZero, PhysicalZero, 0, 0, 0, 3,
STATUS_SUCCESS, PAR_CANT_FIND_PORT_DRIVER);
ParDump(
PARERRORS,
("PARALLEL: Unable to get device object pointer for port object.\n")
);
IoDeleteDevice(deviceObject);
ExFreePool(linkName.Buffer);
goto Cleanup;
}
extension->DeviceObject->StackSize =
extension->PortDeviceObject->StackSize + 1;
InitializeListHead(&extension->WorkQueue);
KeInitializeSemaphore(&extension->RequestSemaphore, 0, MAXLONG);
extension->TimerStart = PAR_WRITE_TIMEOUT_VALUE;
extension->Initialized = FALSE;
extension->Initializing = FALSE;
extension->DeferredWorkItem = NULL;
status = ParGetPortInfoFromPortDevice(extension);
if (!NT_SUCCESS(status)) {
ParLogError(DriverObject, NULL, PhysicalZero, PhysicalZero, 0, 0, 0, 4,
STATUS_SUCCESS, PAR_CANT_FIND_PORT_DRIVER);
ParDump(
PARERRORS,
("PARALLEL: Can't get port info from port device.\n")
);
ObDereferenceObject(extension->PortDeviceFileObject);
IoDeleteDevice(deviceObject);
ExFreePool(linkName.Buffer);
goto Cleanup;
}
extension->BusyDelay = 0;
extension->BusyDelayDetermined = FALSE;
if (extension->OriginalController.HighPart == 0 &&
extension->OriginalController.LowPart == (ULONG) extension->Controller) {
extension->UsePIWriteLoop = FALSE;
} else {
extension->UsePIWriteLoop = TRUE;
}
// Set up some constants.
extension->AbsoluteOneSecond.QuadPart = 10*1000*1000;
extension->OneSecond.QuadPart = -(extension->AbsoluteOneSecond.QuadPart);
// Try to initialize the printer here. This is done here so that printers that
// change modes upon reset can be set to the desired mode before the first print.
//
// Queue up a workitem to initialize the device (so we don't take forever loading).
//
ParDeferDeviceInitialization(extension);
// Now setup the symbolic link for windows.
status = IoCreateUnprotectedSymbolicLink(&linkName, &className);
if (NT_SUCCESS(status)) {
// We were able to create the symbolic link, so record this
// value in the extension for cleanup at unload time.
extension->CreatedSymbolicLink = TRUE;
extension->SymbolicLinkName = linkName;
// Write out the result of the symbolic link to the registry.
status = RtlWriteRegistryValue(RTL_REGISTRY_DEVICEMAP,
L"PARALLEL PORTS",
className.Buffer,
REG_SZ,
linkName.Buffer,
linkName.Length + sizeof(WCHAR));
} else {
//
// Oh well, couldn't create the symbolic link.
//
extension->CreatedSymbolicLink = FALSE;
ParDump(
PARERRORS,
("PARALLEL: Couldn't create the symbolic link\n"
"-------- for port %wZ\n",
&className)
);
ParLogError(DriverObject, deviceObject, extension->OriginalController,
PhysicalZero, 0, 0, 0, 5, status, PAR_NO_SYMLINK_CREATED);
}
ExFreePool(linkName.Buffer);
if (!NT_SUCCESS(status)) {
//
// Oh well, it didn't work. Just go to cleanup.
//
ParDump(
PARERRORS,
("PARALLEL: Couldn't create the device map entry\n"
"-------- for port %wZ\n",
&className)
);
ParLogError(DriverObject, deviceObject, extension->OriginalController,
PhysicalZero, 0, 0, 0, 6, status,
PAR_NO_DEVICE_MAP_CREATED);
}
// Check the registry for parameters.
ParCheckParameters(RegistryPath, extension);
Cleanup:
ExFreePool(portName.Buffer);
ExFreePool(className.Buffer);
}
VOID
ParReleasePortInfoToPortDevice(
IN PDEVICE_EXTENSION Extension
)
/*++
Routine Description:
This routine will release the port information back to the port driver.
Arguments:
Extension - Supplies the device extension.
Return Value:
None.
--*/
{
KEVENT event;
PIRP irp;
IO_STATUS_BLOCK ioStatus;
NTSTATUS status;
KeInitializeEvent(&event, NotificationEvent, FALSE);
irp = IoBuildDeviceIoControlRequest(IOCTL_INTERNAL_RELEASE_PARALLEL_PORT_INFO,
Extension->PortDeviceObject,
NULL, 0, NULL, 0,
TRUE, &event, &ioStatus);
if (!irp) {
return;
}
status = IoCallDriver(Extension->PortDeviceObject, irp);
if (!NT_SUCCESS(status)) {
return;
}
KeWaitForSingleObject(&event, Executive, KernelMode, FALSE, NULL);
}
NTSTATUS
ParGetPortInfoFromPortDevice(
IN OUT PDEVICE_EXTENSION Extension
)
/*++
Routine Description:
This routine will request the port information from the port driver
and fill it in the device extension.
Arguments:
Extension - Supplies the device extension.
Return Value:
STATUS_SUCCESS - Success.
!STATUS_SUCCESS - Failure.
--*/
{
KEVENT event;
PIRP irp;
PARALLEL_PORT_INFORMATION portInfo;
IO_STATUS_BLOCK ioStatus;
NTSTATUS status;
KeInitializeEvent(&event, NotificationEvent, FALSE);
irp = IoBuildDeviceIoControlRequest(IOCTL_INTERNAL_GET_PARALLEL_PORT_INFO,
Extension->PortDeviceObject,
NULL, 0, &portInfo,
sizeof(PARALLEL_PORT_INFORMATION),
TRUE, &event, &ioStatus);
if (!irp) {
return STATUS_INSUFFICIENT_RESOURCES;
}
status = IoCallDriver(Extension->PortDeviceObject, irp);
if (!NT_SUCCESS(status)) {
return status;
}
status = KeWaitForSingleObject(&event, Executive, KernelMode, FALSE, NULL);
if (!NT_SUCCESS(status)) {
return status;
}
status = ioStatus.Status;
if (!NT_SUCCESS(status)) {
return(status);
}
Extension->OriginalController = portInfo.OriginalController;
Extension->Controller = portInfo.Controller;
Extension->SpanOfController = portInfo.SpanOfController;
Extension->FreePort = portInfo.FreePort;
Extension->QueryNumWaiters = portInfo.QueryNumWaiters;
Extension->PortContext = portInfo.Context;
if (Extension->SpanOfController < PARALLEL_REGISTER_SPAN) {
return STATUS_INSUFFICIENT_RESOURCES;
}
return status;
}
VOID
ParDeferredInitCallback(
IN OUT PVOID Context
)
/*++
Routine Description:
This routine initializes the printer by allocating the parallel port,
calling 'ParInitializeDevice', and deallocating the parallel port.
It also clears the Initializing flag upon completion and frees the workitem.
Arguments:
Extension - Supplies the device extension.
Return Value:
None.
--*/
{
KEVENT event;
PIRP irp;
IO_STATUS_BLOCK ioStatus;
NTSTATUS status;
LARGE_INTEGER timeout;
KIRQL oldIrql;
PDEVICE_EXTENSION Extension = (PDEVICE_EXTENSION) Context;
BOOLEAN gotPort = FALSE;
//
// Page the entire driver in until we've completed our initialization
//
ParClaimDriver();
//
// Try to allocate the port
//
KeInitializeEvent(&event, NotificationEvent, FALSE);
irp = IoBuildDeviceIoControlRequest(IOCTL_INTERNAL_PARALLEL_PORT_ALLOCATE,
Extension->PortDeviceObject,
NULL, 0, NULL, 0, TRUE, &event,
&ioStatus);
if (!irp) {
return;
}
IoCallDriver(Extension->PortDeviceObject, irp);
// We're willing to wait at most 5 seconds for the port. Otherwise,
// we'll just initialize the printer later.
timeout.QuadPart = -(50*1000*1000);
status = KeWaitForSingleObject(&event, Executive, KernelMode, FALSE, &timeout);
if (status == STATUS_TIMEOUT) {
KeRaiseIrql(APC_LEVEL, &oldIrql);
if (KeReadStateEvent(&event) == 0) {
IoCancelIrp(irp);
}
KeLowerIrql(oldIrql);
KeWaitForSingleObject(&event, Executive, KernelMode, FALSE, NULL);
}
if (!NT_SUCCESS(ioStatus.Status)) {
// We didn't get the port, so jump to the end
goto DeferredInitCleanup;
}
gotPort = TRUE;
//
// The port was successfully allocated. Intialize the device
//
ParInitializeDevice(Extension);
DeferredInitCleanup:
//
// set the initializing flag to false, release the port driver and the port driver
// info (so it unlocks it's memory) and free the workitem
//
Extension->Initializing = FALSE;
if(gotPort) ParFreePort(Extension);
ParReleasePortInfoToPortDevice(Extension);
if(Extension->DeferredWorkItem) ExFreePool(Extension->DeferredWorkItem);
ParReleaseDriver();
return;
}
VOID
ParCheckParameters(
IN PUNICODE_STRING RegistryPath,
IN OUT PDEVICE_EXTENSION Extension
)
/*++
Routine Description:
This routine reads the parameters section of the registry and modifies
the device extension as specified by the parameters.
Arguments:
RegistryPath - Supplies the registry path.
Extension - Supplies the device extension.
Return Value:
None.
--*/
{
UNICODE_STRING parameters;
UNICODE_STRING path;
RTL_QUERY_REGISTRY_TABLE paramTable[4];
ULONG usePIWriteLoop;
ULONG zero = 0;
ULONG useNT35Priority;
NTSTATUS status;
RtlInitUnicodeString(&parameters, L"\\Parameters");
path.Length = 0;
path.MaximumLength = RegistryPath->Length +
parameters.Length +
sizeof(WCHAR);
path.Buffer = ExAllocatePool(PagedPool, path.MaximumLength);
if (!path.Buffer) {
return;
}
RtlZeroMemory(path.Buffer, path.MaximumLength);
RtlAppendUnicodeStringToString(&path, RegistryPath);
RtlAppendUnicodeStringToString(&path, &parameters);
RtlZeroMemory(paramTable, sizeof(paramTable));
paramTable[0].Flags = RTL_QUERY_REGISTRY_DIRECT;
paramTable[0].Name = L"UsePIWriteLoop";
paramTable[0].EntryContext = &usePIWriteLoop;
paramTable[0].DefaultType = REG_DWORD;
paramTable[0].DefaultData = &zero;
paramTable[0].DefaultLength = sizeof(ULONG);
paramTable[1].Flags = RTL_QUERY_REGISTRY_DIRECT;
paramTable[1].Name = L"UseNT35Priority";
paramTable[1].EntryContext = &useNT35Priority;
paramTable[1].DefaultType = REG_DWORD;
paramTable[1].DefaultData = &zero;
paramTable[1].DefaultLength = sizeof(ULONG);
paramTable[2].Flags = RTL_QUERY_REGISTRY_DIRECT;
paramTable[2].Name = L"InitializationTimeout";
paramTable[2].EntryContext = &(Extension->InitializationTimeout);
paramTable[2].DefaultType = REG_DWORD;
paramTable[2].DefaultData = &zero;
paramTable[2].DefaultLength = sizeof(ULONG);
status = RtlQueryRegistryValues(RTL_REGISTRY_ABSOLUTE | RTL_REGISTRY_OPTIONAL,
path.Buffer, paramTable, NULL, NULL);
if (NT_SUCCESS(status)) {
if(usePIWriteLoop) {
Extension->UsePIWriteLoop = TRUE;
}
if(useNT35Priority) {
Extension->UseNT35Priority = TRUE;
}
if(Extension->InitializationTimeout == 0) {
Extension->InitializationTimeout = 15;
}
} else {
Extension->InitializationTimeout = 15;
}
ExFreePool(path.Buffer);
}
UCHAR
ParReinitializeDevice(
IN PDEVICE_EXTENSION Extension
)
/*++
Routine Description:
This routine is invoked to reinitialize the parallel port device. If the
Initializing flag in the device extension is set, it will wait for it to
complete then return. If the flag is not set, it will call ParInitializeDevice.
Arguments:
Extension - the device extension
Return Value:
the last value that we got from the status register.
--*/
{
if(!Extension->Initializing) {
return ParInitializeDevice(Extension);
} else {
//
// wait for the current initialization attempt to finish
//
do {
KeDelayExecutionThread(KernelMode, FALSE, &Extension->OneSecond);
} while (Extension->Initializing);
return GetStatus(Extension->Controller);
}
}
UCHAR
ParInitializeDevice(
IN PDEVICE_EXTENSION Extension
)
/*++
Routine Description:
This routine is invoked to initialize the parallel port drive.
It performs the following actions:
o Send INIT to the driver and if the device is online, it sends
SLIN
Arguments:
Context - Really the device extension.
Return Value:
The last value that we got from the status register.
--*/
{
KIRQL oldIrql;
LONG countDown;
UCHAR deviceStatus;
LARGE_INTEGER startOfSpin;
LARGE_INTEGER nextQuery;
LARGE_INTEGER difference;
BOOLEAN doDelays;
deviceStatus = GetStatus(Extension->Controller);
ParDump(
PARINITDEV,
("PARALLEL: In ParInitializeDevice - device status is %x\n"
" Initialized: %x\n",
deviceStatus,
Extension->Initialized)
);
if (!Extension->Initialized) {
//
// Clear the register.
//
if (GetControl(Extension->Controller) &
PAR_CONTROL_NOT_INIT) {
//
// We should stall for at least 60 microseconds after
// the init.
//
KeRaiseIrql(
DISPATCH_LEVEL,
&oldIrql
);
StoreControl(
Extension->Controller,
(UCHAR)(PAR_CONTROL_WR_CONTROL | PAR_CONTROL_SLIN)
);
KeStallExecutionProcessor(60);
KeLowerIrql(oldIrql);
}
StoreControl(
Extension->Controller,
(UCHAR)(PAR_CONTROL_WR_CONTROL | PAR_CONTROL_NOT_INIT |
PAR_CONTROL_SLIN)
);
//
// Spin waiting for the device to initialize.
//
countDown = Extension->InitializationTimeout;
doDelays = FALSE;
KeQueryTickCount(&startOfSpin);
ParDump(
PARINITDEV,
("PARALLEL: Starting init wait loop\n")
);
do {
//
// first spin in a tight loop for one second waiting for the
// device to initialize. Once that fails, check every second
// until our countdown runs out.
//
if (!doDelays) {
KeQueryTickCount(&nextQuery);
difference.QuadPart = nextQuery.QuadPart - startOfSpin.QuadPart;
ASSERT(KeQueryTimeIncrement() <= MAXLONG);
if (difference.QuadPart*KeQueryTimeIncrement() >=
Extension->AbsoluteOneSecond.QuadPart) {
ParDump(
PARINITDEV,
("PARALLEL: Did spin of one second\n"
" startOfSpin: %x nextQuery: %x\n",
startOfSpin.LowPart,nextQuery.LowPart)
);
ParDump(
PARINITDEV,
("PARALLEL: parintialize 1 seconds wait\n")
);
countDown--;
doDelays = TRUE;
}
} else {
#ifdef JAPAN // ParInitializeDevice()
//
// IBM PS/55 Printer support.
//
// The printer is keeping PAR_NO_CABLE status
// during initialization. we won't break at the status.
// We suceed in initialization when the status is PE.
// Some of the printers always tell this status when the
// init pulse is sent (the printer will eject paper if it
// is there, and you never suceed in initialization
// unless you are satisfied with PE.)
//
if (PAR_OFF_LINE(deviceStatus) ||
PAR_POWERED_OFF(deviceStatus) ||
PAR_NOT_CONNECTED(deviceStatus) ||
PAR_PAPER_EMPTY2(deviceStatus))
#else
if (PAR_OFF_LINE(deviceStatus) ||
PAR_POWERED_OFF(deviceStatus) ||
PAR_NOT_CONNECTED(deviceStatus))
#endif // JAPAN
{
break;
}
KeDelayExecutionThread(KernelMode, FALSE, &Extension->OneSecond);
ParDump(
PARINITDEV,
("PARALLEL: Did delay thread of one second\n")
);
countDown--;
}
if (countDown <= 0) {
ParDump(
PARINITDEV,
("PARALLEL: leaving with init timeout - status %x\n",
deviceStatus)
);
Extension->Initialized = FALSE;
return deviceStatus;
}
deviceStatus = GetStatus(Extension->Controller);
} while (!PAR_OK(deviceStatus));
#if defined(JAPAN)
if(PAR_OK(deviceStatus) || PAR_OFF_LINE(deviceStatus) ||
PAR_PAPER_EMPTY2(deviceStatus))
#else // JAPAN
if (PAR_OK(deviceStatus) || PAR_OFF_LINE(deviceStatus))
#endif // JAPAN
{
ParDump(
PARINITDEV,
("PARALLEL: device is set to initialized\n")
);
Extension->Initialized = TRUE;
}
}
ParDump(
PARINITDEV,
("PARALLEL: In ParInitializeDevice - leaving with device status is %x\n",
deviceStatus)
);
return deviceStatus;
}
VOID
ParNotInitError(
IN PDEVICE_EXTENSION Extension,
IN UCHAR deviceStatus
)
{
PIRP irp = Extension->CurrentOpIrp;
if (PAR_OFF_LINE(deviceStatus)) {
irp->IoStatus.Status = STATUS_DEVICE_OFF_LINE;
ParDump(
PARSTARTER,
("PARALLEL: starter - off line\n"
"-------- STATUS/INFORMATON: %x/%x\n",
irp->IoStatus.Status,
irp->IoStatus.Information)
);
} else if (PAR_NO_CABLE(deviceStatus)) {
irp->IoStatus.Status = STATUS_DEVICE_NOT_CONNECTED;
ParDump(
PARSTARTER,
("PARALLEL: starter - no cable - not connect status\n"
"-------- STATUS/INFORMATON: %x/%x\n",
irp->IoStatus.Status,
irp->IoStatus.Information)
);
} else if (PAR_PAPER_EMPTY(deviceStatus)) {
irp->IoStatus.Status = STATUS_DEVICE_PAPER_EMPTY;
ParDump(
PARSTARTER,
("PARALLEL: starter - paper empty\n"
"-------- STATUS/INFORMATON: %x/%x\n",
irp->IoStatus.Status,
irp->IoStatus.Information)
);
} else if (PAR_POWERED_OFF(deviceStatus)) {
irp->IoStatus.Status = STATUS_DEVICE_POWERED_OFF;
ParDump(
PARSTARTER,
("PARALLEL: starter - power off\n"
"-------- STATUS/INFORMATON: %x/%x\n",
irp->IoStatus.Status,
irp->IoStatus.Information)
);
} else {
irp->IoStatus.Status = STATUS_DEVICE_NOT_CONNECTED;
ParDump(
PARSTARTER,
("PARALLEL: starter - not conn\n"
"-------- STATUS/INFORMATON: %x/%x\n",
irp->IoStatus.Status,
irp->IoStatus.Information)
);
}
}
VOID
ParFreePort(
IN PDEVICE_EXTENSION Extension
)
/*++
Routine Description:
This routine calls the internal free port ioctl. This routine
should be called before completing an IRP that has allocated
the port.
Arguments:
Extension - Supplies the device extension.
Return Value:
None.
--*/
{
Extension->FreePort(Extension->PortContext);
}
ULONG
ParWriteLoopPI(
IN PUCHAR Controller,
IN PUCHAR WriteBuffer,
IN ULONG NumBytesToWrite,
IN ULONG BusyDelay
)
/*++
Routine Description:
This routine outputs the given write buffer to the parallel port
using the standard centronics protocol.
Arguments:
Controller - Supplies the base address of the parallel port.
WriteBuffer - Supplies the buffer to write to the port.
NumBytesToWrite - Supplies the number of bytes to write out to the port.
BusyDelay - Supplies the number of microseconds to delay before
checking the busy bit.
Return Value:
The number of bytes successfully written out to the parallel port.
Notes:
This routine runs at DISPATCH_LEVEL.
--*/
{
ULONG i;
UCHAR deviceStatus;
if (!BusyDelay) {
BusyDelay = 1;
}
for (i = 0; i < NumBytesToWrite; i++) {
deviceStatus = GetStatus(Controller);
if (PAR_ONLINE(deviceStatus)) {
//
// Anytime we write out a character we will restart
// the count down timer.
//
WRITE_PORT_UCHAR(Controller + PARALLEL_DATA_OFFSET, *WriteBuffer++);
KeStallExecutionProcessor(1);
StoreControl(Controller, (PAR_CONTROL_WR_CONTROL |
PAR_CONTROL_SLIN |
PAR_CONTROL_NOT_INIT |
PAR_CONTROL_STROBE));
KeStallExecutionProcessor(1);
StoreControl(Controller, (PAR_CONTROL_WR_CONTROL |
PAR_CONTROL_SLIN |
PAR_CONTROL_NOT_INIT));
KeStallExecutionProcessor(BusyDelay);
} else {
ParDump(
PARPUSHER,
("PARALLEL: Initiate IO - device is not on line, status: %x\n",
deviceStatus)
);
break;
}
}
return i;
}
ULONG
ParCheckBusyDelay(
IN PDEVICE_EXTENSION Extension,
IN PUCHAR WriteBuffer,
IN ULONG NumBytesToWrite
)
/*++
Routine Description:
This routine determines if the current busy delay setting is
adequate for this printer.
Arguments:
Extension - Supplies the device extension.
WriteBuffer - Supplies the write buffer.
NumBytesToWrite - Supplies the size of the write buffer.
Return Value:
The number of bytes strobed out to the printer.
--*/
{
PUCHAR controller = Extension->Controller;
ULONG busyDelay = Extension->BusyDelay;
LARGE_INTEGER start, perfFreq, end, getStatusTime, callOverhead;
UCHAR deviceStatus;
ULONG numberOfCalls, i;
KIRQL oldIrql;
// If the current busy delay value is 10 or greater then something
// is weird and settle for 10.
if (Extension->BusyDelay >= 10) {
Extension->BusyDelayDetermined = TRUE;
return 0;
}
// Take some performance measurements.
KeRaiseIrql(HIGH_LEVEL, &oldIrql);
start = KeQueryPerformanceCounter(&perfFreq);
deviceStatus = GetStatus(controller);
end = KeQueryPerformanceCounter(&perfFreq);
getStatusTime.QuadPart = end.QuadPart - start.QuadPart;
start = KeQueryPerformanceCounter(&perfFreq);
end = KeQueryPerformanceCounter(&perfFreq);
KeLowerIrql(oldIrql);
callOverhead.QuadPart = end.QuadPart - start.QuadPart;
getStatusTime.QuadPart -= callOverhead.QuadPart;
if (getStatusTime.QuadPart <= 0) {
getStatusTime.QuadPart = 1;
}
// if (!PAR_ONLINE(deviceStatus)) {
// return 0;
// }
// Figure out how many calls to 'GetStatus' can be made in 20 us.
numberOfCalls = (ULONG) (perfFreq.QuadPart*20/getStatusTime.QuadPart/1000000) + 1;
// The printer is ready to accept the a byte. Strobe one out
// and check out the reaction time for BUSY.
if (busyDelay) {
KeRaiseIrql(HIGH_LEVEL, &oldIrql);
WRITE_PORT_UCHAR(controller + PARALLEL_DATA_OFFSET, *WriteBuffer++);
KeStallExecutionProcessor(1);
StoreControl(controller, (PAR_CONTROL_WR_CONTROL |
PAR_CONTROL_SLIN |
PAR_CONTROL_NOT_INIT |
PAR_CONTROL_STROBE));
KeStallExecutionProcessor(1);
StoreControl(controller, (PAR_CONTROL_WR_CONTROL |
PAR_CONTROL_SLIN |
PAR_CONTROL_NOT_INIT));
KeStallExecutionProcessor(busyDelay);
for (i = 0; i < numberOfCalls; i++) {
deviceStatus = GetStatus(controller);
if (!(deviceStatus&PAR_STATUS_NOT_BUSY)) {
break;
}
}
KeLowerIrql(oldIrql);
} else {
KeRaiseIrql(HIGH_LEVEL, &oldIrql);
WRITE_PORT_UCHAR(controller + PARALLEL_DATA_OFFSET, *WriteBuffer++);
KeStallExecutionProcessor(1);
StoreControl(controller, (PAR_CONTROL_WR_CONTROL |
PAR_CONTROL_SLIN |
PAR_CONTROL_NOT_INIT |
PAR_CONTROL_STROBE));
KeStallExecutionProcessor(1);
StoreControl(controller, (PAR_CONTROL_WR_CONTROL |
PAR_CONTROL_SLIN |
PAR_CONTROL_NOT_INIT));
for (i = 0; i < numberOfCalls; i++) {
deviceStatus = GetStatus(controller);
if (!(deviceStatus&PAR_STATUS_NOT_BUSY)) {
break;
}
}
KeLowerIrql(oldIrql);
}
if (i == 0) {
// In this case the BUSY was set as soon as we checked it.
// Use this busyDelay with the PI code.
Extension->UsePIWriteLoop = TRUE;
Extension->BusyDelayDetermined = TRUE;
} else if (i == numberOfCalls) {
// In this case the BUSY was never seen. This is a very fast
// printer so use the fastest code possible.
Extension->BusyDelayDetermined = TRUE;
} else {
// The test failed. The lines showed not BUSY and then BUSY
// without strobing a byte in between.
Extension->UsePIWriteLoop = TRUE;
Extension->BusyDelay++;
}
return 1;
}
VOID
ParWriteOutData(
PDEVICE_EXTENSION Extension
)
{
PIRP irp = Extension->CurrentOpIrp;
KIRQL cancelIrql;
UCHAR deviceStatus;
KIRQL oldIrql;
ULONG timerStart = Extension->TimerStart;
LONG countDown = (LONG)timerStart;
PIO_STACK_LOCATION irpSp = IoGetCurrentIrpStackLocation(irp);
ULONG bytesToWrite = irpSp->Parameters.Write.Length;
PUCHAR irpBuffer = (PUCHAR)irp->AssociatedIrp.SystemBuffer;
LARGE_INTEGER startOfSpin;
LARGE_INTEGER nextQuery;
LARGE_INTEGER difference;
BOOLEAN doDelays, portFree;
ULONG numBytesWritten, loopNumber;
ULONG numberOfBusyChecks = 9;
ULONG maxBusyDelay = 0;
ParDump(
PARTHREAD,
("PARALLEL: timerStart is: %d\n",
timerStart)
);
// Turn off the strobe in case it was left on by some other device sharing
// the port.
StoreControl(Extension->Controller, (PAR_CONTROL_WR_CONTROL |
PAR_CONTROL_SLIN |
PAR_CONTROL_NOT_INIT));
PushSomeBytes:;
//
// While we are strobing data we don't want to get context
// switched away. Raise up to dispatch level to prevent that.
//
// The reason we can't afford the context switch is that
// the device can't have the data strobe line on for more
// than 500 microseconds.
//
//
// We never want to be at raised irql form more than
// 200 microseconds, so we will do no more than 100
// bytes at a time.
//
loopNumber = 512;
if (loopNumber > bytesToWrite) {
loopNumber = bytesToWrite;
}
KeRaiseIrql(DISPATCH_LEVEL, &oldIrql);
if (!Extension->BusyDelayDetermined) {
numBytesWritten = ParCheckBusyDelay(Extension, irpBuffer, loopNumber);
if (Extension->BusyDelayDetermined) {
if (Extension->BusyDelay > maxBusyDelay) {
maxBusyDelay = Extension->BusyDelay;
numberOfBusyChecks = 10;
}
if (numberOfBusyChecks) {
numberOfBusyChecks--;
Extension->BusyDelayDetermined = FALSE;
} else {
Extension->BusyDelay = maxBusyDelay + 1;
}
}
} else if (Extension->UsePIWriteLoop) {
numBytesWritten = ParWriteLoopPI(Extension->Controller, irpBuffer,
loopNumber, Extension->BusyDelay);
} else {
numBytesWritten = ParWriteLoop(Extension->Controller, irpBuffer,
loopNumber);
}
KeLowerIrql(oldIrql);
if (numBytesWritten) {
countDown = timerStart;
irpBuffer += numBytesWritten;
bytesToWrite -= numBytesWritten;
}
//
// Check to see if the io is done. If it is then call the
// code to complete the request.
//
if (!bytesToWrite) {
irp->IoStatus.Status = STATUS_SUCCESS;
irp->IoStatus.Information = irpSp->Parameters.Write.Length;
ParDump(
PARIRPPATH,
("PARALLEL: About to complete IRP in pusher - wrote ok\n"
"irp: %x status: %x Information: %x\n",
irp,
irp->IoStatus.Status,
irp->IoStatus.Information)
);
IoAcquireCancelSpinLock(&cancelIrql);
Extension->CurrentOpIrp = NULL;
IoReleaseCancelSpinLock(cancelIrql);
IoCompleteRequest(
irp,
IO_PARALLEL_INCREMENT
);
ParFreePort(Extension);
return;
//
// See if the IO has been canceled. The cancel routine
// has been removed already (when this became the
// current irp). Simply check the bit. We don't even
// need to capture the lock. If we miss a round
// it won't be that bad.
//
} else if (irp->Cancel) {
irp->IoStatus.Status = STATUS_CANCELLED;
irp->IoStatus.Information = 0;
ParDump(
PARIRPPATH,
("PARALLEL: About to complete IRP in pusher - cancelled\n"
"irp: %x status: %x Information: %x\n",
irp,
irp->IoStatus.Status,
irp->IoStatus.Information)
);
IoAcquireCancelSpinLock(&cancelIrql);
Extension->CurrentOpIrp = NULL;
IoReleaseCancelSpinLock(cancelIrql);
IoCompleteRequest(
irp,
IO_NO_INCREMENT
);
ParFreePort(Extension);
return;
//
// We've taken care of the reasons that the irp "itself"
// might want to be completed.
// printer to see if it is in a state that might
// cause us to complete the irp.
//
} else {
//
// First let's check if the device status is
// ok and online. If it is then simply go back
// to the byte pusher.
//
deviceStatus = GetStatus(Extension->Controller);
if (PAR_ONLINE(deviceStatus)) {
goto PushSomeBytes;
}
//
// Perhaps the operator took the device off line,
// or forgot to put in enough paper. If so, then
// let's hang out here for the until the timeout
// period has expired waiting for them to make things
// all better.
//
if (PAR_PAPER_EMPTY(deviceStatus) ||
PAR_OFF_LINE(deviceStatus)) {
if (countDown > 0) {
//
// We'll wait 1 second increments.
//
ParDump(
PARTHREAD,
("PARALLEL: decrementing countdown for pe/ol\n"
" countDown: %d status: %x\n",
countDown,deviceStatus)
);
countDown--;
// If anyone is waiting for the port then let them have it,
// since the printer is busy.
ParFreePort(Extension);
KeDelayExecutionThread(
KernelMode,
FALSE,
&Extension->OneSecond
);
if (!ParAllocPort(Extension)) {
IoAcquireCancelSpinLock(&cancelIrql);
Extension->CurrentOpIrp = NULL;
IoReleaseCancelSpinLock(cancelIrql);
irp->IoStatus.Information =
irpSp->Parameters.Write.Length - bytesToWrite;
IoCompleteRequest(irp, IO_NO_INCREMENT);
return;
}
goto PushSomeBytes;
} else {
//
// Timer has expired. Complete the request.
//
irp->IoStatus.Information =
irpSp->Parameters.Write.Length - bytesToWrite;
if (PAR_OFF_LINE(deviceStatus)) {
irp->IoStatus.Status = STATUS_DEVICE_OFF_LINE;
ParDump(
PARIRPPATH,
("PARALLEL: About to complete IRP in pusher - offline\n"
"irp: %x status: %x Information: %x\n",
irp,
irp->IoStatus.Status,
irp->IoStatus.Information)
);
} else {
irp->IoStatus.Status = STATUS_DEVICE_PAPER_EMPTY;
ParDump(
PARIRPPATH,
("PARALLEL: About to complete IRP in pusher - PE\n"
"irp: %x status: %x Information: %x\n",
irp,
irp->IoStatus.Status,
irp->IoStatus.Information)
);
}
IoAcquireCancelSpinLock(&cancelIrql);
Extension->CurrentOpIrp = NULL;
IoReleaseCancelSpinLock(cancelIrql);
IoCompleteRequest(
irp,
IO_PARALLEL_INCREMENT
);
ParFreePort(Extension);
return;
}
} else if (PAR_POWERED_OFF(deviceStatus) ||
PAR_NOT_CONNECTED(deviceStatus) ||
PAR_NO_CABLE(deviceStatus)) {
//
// Wimper, wimper, something "bad" happened. Is what
// happened to the printer (power off, not connected, or
// the cable being pulled) something that will require us
// to reinitialize the printer? If we need to
// reinitialize the printer then we should complete
// this IO so that the driving application can
// choose what is the best thing to do about it's
// io.
//
irp->IoStatus.Information = 0;
Extension->Initialized = FALSE;
if (PAR_POWERED_OFF(deviceStatus)) {
irp->IoStatus.Status = STATUS_DEVICE_POWERED_OFF;
ParDump(
PARIRPPATH,
("PARALLEL: About to complete IRP in pusher - OFF\n"
"irp: %x status: %x Information: %x\n",
irp,
irp->IoStatus.Status,
irp->IoStatus.Information)
);
} else if (PAR_NOT_CONNECTED(deviceStatus) ||
PAR_NO_CABLE(deviceStatus)) {
irp->IoStatus.Status = STATUS_DEVICE_NOT_CONNECTED;
ParDump(
PARIRPPATH,
("PARALLEL: About to complete IRP in pusher - NOT CONN\n"
"irp: %x status: %x Information: %x\n",
irp,
irp->IoStatus.Status,
irp->IoStatus.Information)
);
}
IoAcquireCancelSpinLock(&cancelIrql);
Extension->CurrentOpIrp = NULL;
IoReleaseCancelSpinLock(cancelIrql);
IoCompleteRequest(
irp,
IO_PARALLEL_INCREMENT
);
ParFreePort(Extension);
return;
}
//
// The device could simply be busy at this point. Simply spin
// here waiting for the device to be in a state that we
// care about.
//
// As we spin, get the system ticks. Every time that it looks
// like a second has passed, decrement the countdown. If
// it ever goes to zero, then timeout the request.
//
KeQueryTickCount(&startOfSpin);
doDelays = FALSE;
do {
//
// After about a second of spinning, let the rest of the
// machine have time for a second.
//
if (doDelays) {
ParFreePort(Extension);
portFree = TRUE;
KeDelayExecutionThread(KernelMode, FALSE, &Extension->OneSecond);
ParDump(
PARINITDEV,
("PARALLEL: Did delay thread of one second\n")
);
countDown--;
} else {
if (Extension->QueryNumWaiters(Extension->PortContext)) {
ParFreePort(Extension);
portFree = TRUE;
} else {
portFree = FALSE;
}
KeQueryTickCount(&nextQuery);
difference.QuadPart = nextQuery.QuadPart - startOfSpin.QuadPart;
if (difference.QuadPart*KeQueryTimeIncrement() >=
Extension->AbsoluteOneSecond.QuadPart) {
ParDump(
PARTHREAD,
("PARALLEL: Countdown: %d - device Status: %x lowpart: %x highpart: %x\n",
countDown,deviceStatus,difference.LowPart,difference.HighPart)
);
countDown--;
doDelays = TRUE;
}
}
if (countDown <= 0) {
irp->IoStatus.Status = STATUS_DEVICE_BUSY;
irp->IoStatus.Information =
irpSp->Parameters.Write.Length - bytesToWrite;
ParDump(
PARIRPPATH,
("PARALLEL: About to complete IRP in pusher - T-OUT\n"
"irp: %x status: %x Information: %x\n",
irp,
irp->IoStatus.Status,
irp->IoStatus.Information)
);
IoAcquireCancelSpinLock(&cancelIrql);
Extension->CurrentOpIrp = NULL;
IoReleaseCancelSpinLock(cancelIrql);
IoCompleteRequest(
irp,
IO_PARALLEL_INCREMENT
);
if (!portFree) {
ParFreePort(Extension);
}
return;
}
if (portFree && !ParAllocPort(Extension)) {
IoAcquireCancelSpinLock(&cancelIrql);
Extension->CurrentOpIrp = NULL;
IoReleaseCancelSpinLock(cancelIrql);
irp->IoStatus.Information =
irpSp->Parameters.Write.Length - bytesToWrite;
IoCompleteRequest(irp, IO_NO_INCREMENT);
return;
}
deviceStatus = GetStatus(Extension->Controller);
} while ((!PAR_ONLINE(deviceStatus)) &&
(!PAR_PAPER_EMPTY(deviceStatus)) &&
(!PAR_POWERED_OFF(deviceStatus)) &&
(!PAR_NOT_CONNECTED(deviceStatus)) &&
(!PAR_NO_CABLE(deviceStatus)) &&
!irp->Cancel);
if (countDown != (LONG)timerStart) {
ParDump(
PARTHREAD,
("PARALLEL: Leaving busy loop - countdown %d status %x\n",
countDown,deviceStatus)
);
}
goto PushSomeBytes;
}
return;
}
UCHAR
ParManageIoDevice(
IN PDEVICE_EXTENSION Extension,
OUT PUCHAR Status,
OUT PUCHAR Control
)
/*++
Routine Description :
This routine does the IoControl commands.
Arguments :
Extension - The parallel device extension.
Status - The pointer to the location to return the device status.
Control - The pointer to the location to return the device control.
Return Value :
NONE.
--*/
{
PIO_STACK_LOCATION irpSp =
IoGetCurrentIrpStackLocation(Extension->CurrentOpIrp);
if (irpSp->Parameters.DeviceIoControl.IoControlCode ==
IOCTL_PAR_SET_INFORMATION) {
PPAR_SET_INFORMATION irpBuffer =
Extension->CurrentOpIrp->AssociatedIrp.SystemBuffer;
Extension->Initialized = FALSE;
*Status = ParReinitializeDevice(Extension);
} else if (irpSp->Parameters.DeviceIoControl.IoControlCode ==
IOCTL_PAR_QUERY_INFORMATION) {
*Status = GetStatus(Extension->Controller);
*Control = GetControl(Extension->Controller);
}
return *Status;
}
VOID
ParTerminateNibbleMode(
IN PUCHAR Controller
)
/*++
Routine Description:
This routine terminates the interface back to compatibility mode.
Arguments:
Controller - Supplies the parallel port's controller address.
Return Value:
None.
--*/
{
LARGE_INTEGER wait35ms, start, end;
UCHAR dcr, dsr;
wait35ms.QuadPart = (35*10*1000) + KeQueryTimeIncrement();
dcr = DCR_NEUTRAL;
WRITE_PORT_UCHAR(Controller + DCR_OFFSET, dcr);
KeQueryTickCount(&start);
for (;;) {
KeQueryTickCount(&end);
dsr = READ_PORT_UCHAR(Controller + DSR_OFFSET);
if (!(dsr&DSR_PTR_CLK)) {
break;
}
if ((end.QuadPart - start.QuadPart)*KeQueryTimeIncrement() >
wait35ms.QuadPart) {
// We couldn't negotiate back to compatibility mode.
// just terminate.
return;
}
}
dcr |= DCR_NOT_HOST_BUSY;
WRITE_PORT_UCHAR(Controller + DCR_OFFSET, dcr);
KeQueryTickCount(&start);
for (;;) {
KeQueryTickCount(&end);
dsr = READ_PORT_UCHAR(Controller + DSR_OFFSET);
if (dsr&DSR_PTR_CLK) {
break;
}
if ((end.QuadPart - start.QuadPart)*KeQueryTimeIncrement() >
wait35ms.QuadPart) {
// The required response is not there. Continue anyway.
break;
}
}
dcr &= ~DCR_NOT_HOST_BUSY;
WRITE_PORT_UCHAR(Controller + DCR_OFFSET, dcr);
}
NTSTATUS
ParEnterNibbleMode(
IN PUCHAR Controller,
IN BOOLEAN DeviceIdRequest
)
/*++
Routine Description:
This routine performs 1284 negotiation with the peripheral to the
nibble mode protocol.
Arguments:
Controller - Supplies the port address.
DeviceIdRequest - Supplies whether or not this is a request for a device
id.
Return Value:
STATUS_SUCCESS - Successful negotiation.
otherwise - Unsuccessful negotiation.
--*/
{
UCHAR extensibility;
UCHAR dsr, dcr;
LARGE_INTEGER wait35ms, start, end;
BOOLEAN xFlag;
extensibility = 0x00;
if (DeviceIdRequest) {
extensibility |= 0x04;
}
dcr = DCR_NEUTRAL;
WRITE_PORT_UCHAR(Controller + DCR_OFFSET, dcr);
KeStallExecutionProcessor(1);
WRITE_PORT_UCHAR(Controller + DATA_OFFSET, extensibility);
KeStallExecutionProcessor(1);
dcr &= ~DCR_NOT_1284_ACTIVE;
dcr |= DCR_NOT_HOST_BUSY;
WRITE_PORT_UCHAR(Controller + DCR_OFFSET, dcr);
wait35ms.QuadPart = (35*10*1000) + KeQueryTimeIncrement();
KeQueryTickCount(&start);
for (;;) {
KeQueryTickCount(&end);
dsr = READ_PORT_UCHAR(Controller + DSR_OFFSET);
if ((dsr&DSR_ACK_DATA_REQ) &&
(dsr&DSR_XFLAG) &&
(dsr&DSR_NOT_DATA_AVAIL) &&
!(dsr&DSR_PTR_CLK)) {
break;
}
if ((end.QuadPart - start.QuadPart)*KeQueryTimeIncrement() >
wait35ms.QuadPart) {
dcr |= DCR_NOT_1284_ACTIVE;
dcr &= ~DCR_NOT_HOST_BUSY;
WRITE_PORT_UCHAR(Controller + DCR_OFFSET, dcr);
return STATUS_INVALID_DEVICE_REQUEST;
}
}
dcr |= DCR_NOT_HOST_CLK;
WRITE_PORT_UCHAR(Controller + DCR_OFFSET, dcr);
KeStallExecutionProcessor(1);
dcr &= ~DCR_NOT_HOST_CLK;
dcr &= ~DCR_NOT_HOST_BUSY;
WRITE_PORT_UCHAR(Controller + DCR_OFFSET, dcr);
KeQueryTickCount(&start);
for (;;) {
KeQueryTickCount(&end);
dsr = READ_PORT_UCHAR(Controller + DSR_OFFSET);
if (dsr&DSR_PTR_CLK) {
break;
}
if ((end.QuadPart - start.QuadPart)*KeQueryTimeIncrement() >
wait35ms.QuadPart) {
dcr |= DCR_NOT_1284_ACTIVE;
WRITE_PORT_UCHAR(Controller + DCR_OFFSET, dcr);
return STATUS_INVALID_DEVICE_REQUEST;
}
}
xFlag = dsr&DSR_XFLAG ? TRUE : FALSE;
if (extensibility && !xFlag) {
// The requested mode is not supported so
// terminate into compatibility mode.
ParTerminateNibbleMode(Controller);
return STATUS_INVALID_DEVICE_REQUEST;
}
return STATUS_SUCCESS;
}
NTSTATUS
ParNibbleModeRead(
IN PDEVICE_EXTENSION Extension,
IN PVOID Buffer,
IN ULONG BufferSize,
OUT PULONG BytesTransfered
)
/*++
Routine Description:
This routine performs a 1284 nibble mode read into the given
buffer for no more than 'BufferSize' bytes.
Arguments:
Extension - Supplies the device extension.
Buffer - Supplies the buffer to read into.
BufferSize - Supplies the number of bytes in the buffer.
BytesTransfered - Returns the number of bytes transferred.
--*/
{
PUCHAR controller = Extension->Controller;
NTSTATUS status;
PUCHAR p = Buffer;
LARGE_INTEGER wait35ms, start, end;
UCHAR dsr, dcr, nibble[2];
ULONG i, j;
// Read nibbles according to 1284 spec.
wait35ms.QuadPart = (35*10*1000) + KeQueryTimeIncrement();
dcr = DCR_RESERVED | DCR_NOT_INIT;
for (i = 0; i < BufferSize; i++) {
dsr = READ_PORT_UCHAR(controller + DSR_OFFSET);
if (dsr&DSR_NOT_DATA_AVAIL) {
break;
}
for (j = 0; j < 2; j++) {
dcr |= DCR_NOT_HOST_BUSY;
WRITE_PORT_UCHAR(controller + DCR_OFFSET, dcr);
KeQueryTickCount(&start);
for (;;) {
KeQueryTickCount(&end);
dsr = READ_PORT_UCHAR(controller + DSR_OFFSET);
if (!(dsr&DSR_PTR_CLK)) {
break;
}
if ((end.QuadPart - start.QuadPart)*KeQueryTimeIncrement() >
wait35ms.QuadPart) {
dcr &= ~DCR_NOT_HOST_BUSY;
WRITE_PORT_UCHAR(controller + DCR_OFFSET, dcr);
return STATUS_IO_DEVICE_ERROR;
}
}
nibble[j] = READ_PORT_UCHAR(controller + DSR_OFFSET);
dcr &= ~DCR_NOT_HOST_BUSY;
WRITE_PORT_UCHAR(controller + DCR_OFFSET, dcr);
KeQueryTickCount(&start);
for (;;) {
KeQueryTickCount(&end);
dsr = READ_PORT_UCHAR(controller + DSR_OFFSET);
if (dsr&DSR_PTR_CLK) {
break;
}
if ((end.QuadPart - start.QuadPart)*KeQueryTimeIncrement() >
wait35ms.QuadPart) {
return STATUS_IO_DEVICE_ERROR;
}
}
}
p[i] = (((nibble[0]&0x38)>>3)&0x07) |
((nibble[0]&0x80) ? 0x00 : 0x08);
p[i] |= (((nibble[1]&0x38)<<1)&0x70) |
((nibble[1]&0x80) ? 0x00 : 0x80);
}
*BytesTransfered = i;
return STATUS_SUCCESS;
}
NTSTATUS
ParQueryDeviceId(
IN PDEVICE_EXTENSION Extension,
OUT PUCHAR DeviceIdBuffer,
IN ULONG BufferSize,
OUT PULONG DeviceIdSize
)
/*++
Routine Description:
This routine queries the 1284 device id from the device.
Arguments:
Extension - Supplies the device extension.
DeviceIdBuffer - Supplies a buffer to receive the device id string.
BufferSize - Supplies the number of bytes in the buffer.
DeviceIdSize - Returns the number of bytes in the device id string.
Return Value:
STATUS_SUCCESS - Success.
STATUS_BUFFER_TOO_SMALL - The device id was not returned because the buffer
was too small. 'DeviceIdSize' will return the
required size of the buffer.
otherwise - Failure.
--*/
{
PUCHAR controller = Extension->Controller;
NTSTATUS status;
UCHAR sizeBuf[2];
ULONG numBytes;
USHORT size;
*DeviceIdSize = 0;
// Try to negotiate the peripheral into nibble mode device id request.
status = ParEnterNibbleMode(controller, TRUE);
if (!NT_SUCCESS(status)) {
return status;
}
// Try to read the Device id from nibble mode.
status = ParNibbleModeRead(Extension, sizeBuf, 2, &numBytes);
if (NT_SUCCESS(status) && numBytes != 2) {
status = STATUS_IO_DEVICE_ERROR;
}
if (NT_SUCCESS(status)) {
size = sizeBuf[0]*0x100 + sizeBuf[1];
*DeviceIdSize = size - sizeof(USHORT);
if (*DeviceIdSize > BufferSize) {
status = STATUS_BUFFER_TOO_SMALL;
}
if (NT_SUCCESS(status)) {
status = ParNibbleModeRead(Extension, DeviceIdBuffer,
*DeviceIdSize, &numBytes);
if (NT_SUCCESS(status) && numBytes != *DeviceIdSize) {
status = STATUS_IO_DEVICE_ERROR;
}
}
}
ParTerminateNibbleMode(controller);
WRITE_PORT_UCHAR(controller + DCR_OFFSET, DCR_NEUTRAL);
return status;
}
VOID
ParReadIo(
IN PDEVICE_EXTENSION Extension
)
/*++
Routine Description:
This routine implements a READ request with the extension's current irp.
Arguments:
Extension - Supplies the device extension.
Return Value:
None.
--*/
{
PIRP irp = Extension->CurrentOpIrp;
PIO_STACK_LOCATION irpSp = IoGetCurrentIrpStackLocation(irp);
KIRQL cancelIrql;
UCHAR deviceStatus;
NTSTATUS status;
ULONG bytes;
if (!Extension->Initialized) {
deviceStatus = ParReinitializeDevice(Extension);
}
if (!Extension->Initialized) {
// The device didn't initialize, so complete with error.
ParNotInitError(Extension, deviceStatus);
IoAcquireCancelSpinLock(&cancelIrql);
Extension->CurrentOpIrp = NULL;
IoReleaseCancelSpinLock(cancelIrql);
IoCompleteRequest(irp, IO_NO_INCREMENT);
ParFreePort(Extension);
return;
}
bytes = 0;
status = ParEnterNibbleMode(Extension->Controller, FALSE);
if (NT_SUCCESS(status)) {
status = ParNibbleModeRead(Extension,
irp->AssociatedIrp.SystemBuffer,
irpSp->Parameters.Read.Length,
&bytes);
if (NT_SUCCESS(status)) {
ParTerminateNibbleMode(Extension->Controller);
}
}
irp->IoStatus.Status = status;
irp->IoStatus.Information = bytes;
IoAcquireCancelSpinLock(&cancelIrql);
Extension->CurrentOpIrp = NULL;
IoReleaseCancelSpinLock(cancelIrql);
IoCompleteRequest(irp, IO_PARALLEL_INCREMENT);
ParFreePort(Extension);
}
VOID
ParStartIo(
IN PDEVICE_EXTENSION Extension
)
/*++
Routine Description:
This routine starts an I/O operation for the driver and
then returns
Arguments:
Extension - The parallel device extension
Return Value:
None
--*/
{
PIRP irp = Extension->CurrentOpIrp;
PIO_STACK_LOCATION irpSp = IoGetCurrentIrpStackLocation(irp);
KIRQL cancelIrql;
UCHAR deviceStatus;
ULONG idLength;
NTSTATUS ntStatus;
// Allocate the port.
if (!ParAllocPort(Extension)) {
// If the allocation didn't succeed then fail this IRP.
IoAcquireCancelSpinLock(&cancelIrql);
Extension->CurrentOpIrp = NULL;
IoReleaseCancelSpinLock(cancelIrql);
irp->IoStatus.Information = 0;
IoCompleteRequest(irp, IO_NO_INCREMENT);
return;
}
ParDump(
PARIRPPATH,
("PARALLEL: In startio with IRP: %x\n",
irp)
);
if (irpSp->MajorFunction == IRP_MJ_WRITE) {
UCHAR deviceStatus;
if (!Extension->Initialized) {
deviceStatus = ParReinitializeDevice(Extension);
}
if (!Extension->Initialized) {
ParNotInitError(
Extension,
deviceStatus
);
} else {
ParWriteOutData(
Extension
);
return;
}
} else if (irpSp->MajorFunction == IRP_MJ_READ) {
ParReadIo(Extension);
return;
} else {
UCHAR status;
UCHAR control;
ParManageIoDevice(
Extension,
&status,
&control
);
if (irpSp->Parameters.DeviceIoControl.IoControlCode ==
IOCTL_PAR_SET_INFORMATION) {
if (!Extension->Initialized) {
ParNotInitError(
Extension,
status
);
} else {
irp->IoStatus.Status = STATUS_SUCCESS;
}
} else if (irpSp->Parameters.DeviceIoControl.IoControlCode ==
IOCTL_PAR_QUERY_INFORMATION) {
PPAR_QUERY_INFORMATION irpBuffer = irp->AssociatedIrp.SystemBuffer;
irp->IoStatus.Status = STATUS_SUCCESS;
//
// Interpretating Status & Control
//
irpBuffer->Status = 0x0;
if (PAR_POWERED_OFF(status) ||
PAR_NO_CABLE(status)) {
irpBuffer->Status =
(UCHAR)(irpBuffer->Status | PARALLEL_POWER_OFF);
} else if (PAR_PAPER_EMPTY(status)) {
irpBuffer->Status =
(UCHAR)(irpBuffer->Status | PARALLEL_PAPER_EMPTY);
} else if (PAR_OFF_LINE(status)) {
irpBuffer->Status =
(UCHAR)(irpBuffer->Status | PARALLEL_OFF_LINE);
} else if (PAR_NOT_CONNECTED(status)) {
irpBuffer->Status =
(UCHAR)(irpBuffer->Status | PARALLEL_NOT_CONNECTED);
}
if (PAR_BUSY(status)) {
irpBuffer->Status =
(UCHAR)(irpBuffer->Status | PARALLEL_BUSY);
}
if (PAR_SELECTED(status)) {
irpBuffer->Status =
(UCHAR)(irpBuffer->Status | PARALLEL_SELECTED);
}
irp->IoStatus.Information =
sizeof( PAR_QUERY_INFORMATION );
} else if (irpSp->Parameters.DeviceIoControl.IoControlCode ==
IOCTL_PAR_QUERY_DEVICE_ID) {
if (!Extension->Initialized) {
deviceStatus = ParReinitializeDevice(Extension);
}
if (!Extension->Initialized) {
ParNotInitError(Extension, deviceStatus);
} else {
ntStatus = ParQueryDeviceId(Extension,
irp->AssociatedIrp.SystemBuffer,
irpSp->Parameters.DeviceIoControl.OutputBufferLength,
&idLength);
irp->IoStatus.Status = ntStatus;
if (NT_SUCCESS(ntStatus)) {
irp->IoStatus.Information = idLength;
} else {
irp->IoStatus.Information = 0;
}
}
} else if (irpSp->Parameters.DeviceIoControl.IoControlCode ==
IOCTL_PAR_QUERY_DEVICE_ID_SIZE) {
if (!Extension->Initialized) {
deviceStatus = ParReinitializeDevice(Extension);
}
if (!Extension->Initialized) {
ParNotInitError(Extension, deviceStatus);
} else {
ntStatus = ParQueryDeviceId(Extension, NULL, 0, &idLength);
if (ntStatus == STATUS_BUFFER_TOO_SMALL) {
irp->IoStatus.Status = STATUS_SUCCESS;
irp->IoStatus.Information =
sizeof(PAR_DEVICE_ID_SIZE_INFORMATION);
((PPAR_DEVICE_ID_SIZE_INFORMATION)
irp->AssociatedIrp.SystemBuffer)->DeviceIdSize = idLength;
} else {
irp->IoStatus.Status = ntStatus;
irp->IoStatus.Information = 0;
}
}
} else {
PSERIAL_TIMEOUTS new = irp->AssociatedIrp.SystemBuffer;
//
// The only other thing let through is setting
// the timer start.
//
Extension->TimerStart = new->WriteTotalTimeoutConstant / 1000;
irp->IoStatus.Status = STATUS_SUCCESS;
}
}
ParDump(
PARIRPPATH,
("PARALLEL: About to complete IRP in startio\n"
"Irp: %x status: %x Information: %x\n",
irp,
irp->IoStatus.Status,
irp->IoStatus.Information)
);
IoAcquireCancelSpinLock(&cancelIrql);
Extension->CurrentOpIrp = NULL;
IoReleaseCancelSpinLock(cancelIrql);
IoCompleteRequest(
irp,
IO_NO_INCREMENT
);
ParFreePort(Extension);
return;
}
VOID
ParallelThread(
IN PVOID Context
)
{
PDEVICE_EXTENSION extension = Context;
LONG threadPriority = -2;
KIRQL oldIrql;
//
// Lower ourselves down just at tad so that we compete a
// little less.
// If the registry indicates we should be running at the old
// priority, don't lower our priority as much.
//
if(extension->UseNT35Priority) {
threadPriority = -1;
}
KeSetBasePriorityThread(
KeGetCurrentThread(),
threadPriority
);
do {
//
// Wait for a request from the dispatch routines.
// KeWaitForSingleObject won't return error here - this thread
// isn't alertable and won't take APCs, and we're not passing in
// a timeout.
//
ParDump(
PARTHREAD,
("PARALLEL: semaphore state before wait - %d\n",
extension->RequestSemaphore.Header.SignalState)
);
KeWaitForSingleObject(
&extension->RequestSemaphore,
UserRequest,
KernelMode,
FALSE,
NULL
);
ParDump(
PARTHREAD,
("PARALLEL: semaphore state after wait - %d\n",
extension->RequestSemaphore.Header.SignalState)
);
if ( extension->TimeToTerminateThread ) {
ParDump(
PARCONFIG,
("PARALLEL: Thread asked to kill itself\n")
);
PsTerminateSystemThread( STATUS_SUCCESS );
}
//
// While we are manipulating the queue we capture the
// cancel spin lock.
//
IoAcquireCancelSpinLock(&oldIrql);
ASSERT(!extension->CurrentOpIrp);
while (!IsListEmpty(&extension->WorkQueue)) {
PLIST_ENTRY headOfList;
PIRP currentIrp;
headOfList = RemoveHeadList(&extension->WorkQueue);
currentIrp = CONTAINING_RECORD(
headOfList,
IRP,
Tail.Overlay.ListEntry
);
IoSetCancelRoutine(
currentIrp,
NULL
);
extension->CurrentOpIrp = currentIrp;
IoReleaseCancelSpinLock(oldIrql);
//
// Do the Io.
//
ParStartIo(
extension
);
IoAcquireCancelSpinLock(&oldIrql);
}
IoReleaseCancelSpinLock(oldIrql);
} while (TRUE);
}
NTSTATUS
ParCreateSystemThread(
PDEVICE_EXTENSION Extension
)
{
NTSTATUS status;
HANDLE threadHandle;
//
// Start the thread and capture the thread handle into the extension
//
status = PsCreateSystemThread(
&threadHandle,
THREAD_ALL_ACCESS,
NULL,
NULL,
NULL,
ParallelThread,
Extension
);
if (!NT_ERROR(status)) {
//
// We've got the thread. Now get a pointer to it.
//
status = ObReferenceObjectByHandle(
threadHandle,
THREAD_ALL_ACCESS,
NULL,
KernelMode,
&Extension->ThreadObjectPointer,
NULL
);
if (NT_ERROR(status)) {
ParDump(
PARIRPPATH,
("PARALLEL: Bad status on open from ref by handle: %x\n",
status)
);
Extension->TimeToTerminateThread = TRUE;
KeReleaseSemaphore(
&Extension->RequestSemaphore,
0,
1,
FALSE
);
} else {
//
// Now that we have a reference to the thread
// we can simply close the handle.
//
ZwClose(threadHandle);
}
} else {
ParDump(
PARIRPPATH,
("PARALLEL: Bad status on open from ref by handle: %x\n",
status)
);
}
return status;
}
NTSTATUS
ParCreateOpen(
IN PDEVICE_OBJECT DeviceObject,
IN PIRP Irp
)
/*++
Routine Description:
This routine is the dispatch for a create requests.
Arguments:
DeviceObject - Supplies the device object.
Irp - Supplies the I/O request packet.
Return Value:
STATUS_SUCCESS - Success.
!STATUS_SUCCESS - Failure.
--*/
{
NTSTATUS returnStatus;
PDEVICE_EXTENSION extension = DeviceObject->DeviceExtension;
ParDump(
PARIRPPATH,
("PARALLEL: In create/open with IRP: %x\n",
Irp)
);
Irp->IoStatus.Information = 0;
// Lock in code.
ParClaimDriver();
// Lock in the port driver.
ParGetPortInfoFromPortDevice(extension);
extension->TimeToTerminateThread = FALSE;
extension->ThreadObjectPointer = NULL;
ParDump(
PARTHREAD,
("PARALLEL: open initializing - state before init - %d\n",
extension->RequestSemaphore.Header.SignalState)
);
KeInitializeSemaphore(&extension->RequestSemaphore, 0, MAXLONG);
if (IoGetCurrentIrpStackLocation(Irp)->Parameters.Create.Options
& FILE_DIRECTORY_FILE) {
returnStatus = Irp->IoStatus.Status = STATUS_NOT_A_DIRECTORY;
} else {
returnStatus = Irp->IoStatus.Status = ParCreateSystemThread(extension);
}
ParDump(
PARIRPPATH,
("PARALLEL: About to complete IRP in create/open\n"
"Irp: %x status: %x Information: %x\n",
Irp,
Irp->IoStatus.Status,
Irp->IoStatus.Information)
);
IoCompleteRequest(Irp, IO_NO_INCREMENT);
return returnStatus;
}
NTSTATUS
ParClose(
IN PDEVICE_OBJECT DeviceObject,
IN PIRP Irp
)
/*++
Routine Description:
This routine is the dispatch for a close requests.
Arguments:
DeviceObject - Supplies the device object.
Irp - Supplies the I/O request packet.
Return Value:
STATUS_SUCCESS - Success.
--*/
{
PDEVICE_EXTENSION extension;
NTSTATUS statusOfWait;
ParDump(
PARIRPPATH,
("PARALLEL: In close with IRP: %x\n",
Irp)
);
//
// Set the semaphore that will wake up the thread, which
// will then notice that the thread is supposed to die.
//
extension = DeviceObject->DeviceExtension;
Irp->IoStatus.Status = STATUS_SUCCESS;
Irp->IoStatus.Information = 0;
extension->TimeToTerminateThread = TRUE;
ParDump(
PARTHREAD,
("PARALLEL: close releasing - state before release - %d\n",
extension->RequestSemaphore.Header.SignalState)
);
KeReleaseSemaphore(&extension->RequestSemaphore, 0, 1, FALSE);
//
// Wait on the thread handle, when the wait is satisfied, the
// thread has gone away.
//
statusOfWait = KeWaitForSingleObject(extension->ThreadObjectPointer,
UserRequest, KernelMode, FALSE, NULL);
ParDump(
PARTHREAD,
("PARALLEL: return status of waiting for thread to die: %x\n",
statusOfWait)
);
//
// Thread is gone. Status is successful for the close.
// Defreference the pointer to the thread object.
//
ObDereferenceObject(extension->ThreadObjectPointer);
extension->ThreadObjectPointer = NULL;
ParDump(
PARIRPPATH,
("PARALLEL: About to complete IRP in close\n"
"Irp: %x status: %x Information: %x\n",
Irp,
Irp->IoStatus.Status,
Irp->IoStatus.Information)
);
// Allow the port driver to be paged.
ParReleasePortInfoToPortDevice(extension);
IoCompleteRequest(Irp, IO_NO_INCREMENT);
// Unlock the code that was locked during the open.
ParReleaseDriver();
return STATUS_SUCCESS;
}
NTSTATUS
ParCleanup(
IN PDEVICE_OBJECT DeviceObject,
IN PIRP Irp
)
/*++
Routine Description:
This routine is the dispatch for a cleanup requests.
Arguments:
DeviceObject - Supplies the device object.
Irp - Supplies the I/O request packet.
Return Value:
STATUS_SUCCESS - Success.
--*/
{
PDEVICE_EXTENSION extension;
KIRQL cancelIrql;
PDRIVER_CANCEL cancelRoutine;
PIRP currentLastIrp;
ParDump(
PARIRPPATH,
("PARALLEL: In cleanup with IRP: %x\n",
Irp)
);
extension = DeviceObject->DeviceExtension;
//
// While the list is not empty, go through and cancel each irp.
//
IoAcquireCancelSpinLock(&cancelIrql);
//
// Clean the list from back to front.
//
while (!IsListEmpty(&extension->WorkQueue)) {
currentLastIrp = CONTAINING_RECORD(extension->WorkQueue.Blink,
IRP, Tail.Overlay.ListEntry);
RemoveEntryList(extension->WorkQueue.Blink);
cancelRoutine = currentLastIrp->CancelRoutine;
currentLastIrp->CancelIrql = cancelIrql;
currentLastIrp->CancelRoutine = NULL;
currentLastIrp->Cancel = TRUE;
cancelRoutine(DeviceObject, currentLastIrp);
IoAcquireCancelSpinLock(&cancelIrql);
}
//
// If there is a current irp then mark it as cancelled.
//
if (extension->CurrentOpIrp) {
extension->CurrentOpIrp->Cancel = TRUE;
}
IoReleaseCancelSpinLock(cancelIrql);
Irp->IoStatus.Information = 0;
Irp->IoStatus.Status = STATUS_SUCCESS;
ParDump(
PARIRPPATH,
("PARALLEL: About to complete IRP in cleanup\n"
"Irp: %x status: %x Information: %x\n",
Irp,
Irp->IoStatus.Status,
Irp->IoStatus.Information)
);
IoCompleteRequest(Irp, IO_NO_INCREMENT);
return STATUS_SUCCESS;
}
VOID
ParCancelRequest(
PDEVICE_OBJECT DeviceObject,
PIRP Irp
)
/*++
Routine Description:
This routine is used to cancel any request in the parallel driver.
Arguments:
DeviceObject - Pointer to the device object for this device
Irp - Pointer to the IRP to be canceled.
Return Value:
None.
--*/
{
//
// The only reason that this irp can be on the queue is
// if it's not the current irp. Pull it off the queue
// and complete it as canceled.
//
ASSERT(!IsListEmpty(&Irp->Tail.Overlay.ListEntry));
RemoveEntryList(&Irp->Tail.Overlay.ListEntry);
IoReleaseCancelSpinLock(Irp->CancelIrql);
Irp->IoStatus.Status = STATUS_CANCELLED;
Irp->IoStatus.Information = 0;
ParDump(
PARIRPPATH,
("PARALLEL: About to complete IRP in cancel routine\n"
"Irp: %x status: %x Information: %x\n",
Irp,
Irp->IoStatus.Status,
Irp->IoStatus.Information)
);
IoCompleteRequest(
Irp,
IO_NO_INCREMENT
);
}
NTSTATUS
ParAllocPortCompletionRoutine(
IN PDEVICE_OBJECT DeviceObject,
IN PIRP Irp,
IN PVOID Event
)
/*++
Routine Description:
This routine is the completion routine for a port allocate request.
Arguments:
DeviceObject - Supplies the device object.
Irp - Supplies the I/O request packet.
Context - Supplies the notification event.
Return Value:
STATUS_MORE_PROCESSING_REQUIRED - The Irp still requires processing.
--*/
{
KeSetEvent((PKEVENT) Event, 0, FALSE);
return STATUS_MORE_PROCESSING_REQUIRED;
}
BOOLEAN
ParAllocPort(
IN PDEVICE_EXTENSION Extension
)
/*++
Routine Description:
This routine takes the given Irp and sends it down as a port allocate
request. When this request completes, the Irp will be queued for
processing.
Arguments:
Extension - Supplies the device extension.
Return Value:
FALSE - The port was not successfully allocated.
TRUE - The port was successfully allocated.
--*/
{
PIO_STACK_LOCATION nextSp;
KEVENT event;
PIRP irp = Extension->CurrentOpIrp;
BOOLEAN b;
NTSTATUS status;
LARGE_INTEGER timeout;
KeInitializeEvent(&event, NotificationEvent, FALSE);
nextSp = IoGetNextIrpStackLocation(irp);
nextSp->MajorFunction = IRP_MJ_INTERNAL_DEVICE_CONTROL;
nextSp->Parameters.DeviceIoControl.IoControlCode =
IOCTL_INTERNAL_PARALLEL_PORT_ALLOCATE;
IoSetCompletionRoutine(irp, ParAllocPortCompletionRoutine, &event,
TRUE, TRUE, TRUE);
IoCallDriver(Extension->PortDeviceObject, irp);
timeout.QuadPart = -((LONGLONG) Extension->TimerStart*10*1000*1000);
status = KeWaitForSingleObject(&event, Executive, KernelMode, FALSE, &timeout);
if (status == STATUS_TIMEOUT) {
IoCancelIrp(irp);
KeWaitForSingleObject(&event, Executive, KernelMode, FALSE, NULL);
}
b = NT_SUCCESS(irp->IoStatus.Status);
if (!b) {
irp->IoStatus.Status = STATUS_DEVICE_BUSY;
}
return b;
}
NTSTATUS
ParReadWrite(
IN PDEVICE_OBJECT DeviceObject,
IN PIRP Irp
)
/*++
Routine Description:
This routine is the dispatch for read and write requests.
Arguments:
DeviceObject - Supplies the device object.
Irp - Supplies the I/O request packet.
Return Value:
STATUS_SUCCESS - Success.
STATUS_PENDING - Request pending.
STATUS_INVALID_PARAMETER - Invalid parameter.
--*/
{
PIO_STACK_LOCATION irpSp;
NTSTATUS status;
PDEVICE_EXTENSION extension;
KIRQL oldIrql;
Irp->IoStatus.Information = 0;
irpSp = IoGetCurrentIrpStackLocation(Irp);
extension = DeviceObject->DeviceExtension;
if ((irpSp->Parameters.Write.ByteOffset.HighPart != 0) ||
(irpSp->Parameters.Write.ByteOffset.LowPart != 0)) {
status = STATUS_INVALID_PARAMETER;
} else if (irpSp->Parameters.Write.Length == 0) {
status = STATUS_SUCCESS;
} else {
status = STATUS_PENDING;
}
if (status == STATUS_PENDING) {
IoAcquireCancelSpinLock(&oldIrql);
if (Irp->Cancel) {
IoReleaseCancelSpinLock(oldIrql);
status = STATUS_CANCELLED;
} else {
IoMarkIrpPending(Irp);
IoSetCancelRoutine(Irp, ParCancelRequest);
InsertTailList(&extension->WorkQueue, &Irp->Tail.Overlay.ListEntry);
IoReleaseCancelSpinLock(oldIrql);
KeReleaseSemaphore(&extension->RequestSemaphore, 0, 1, FALSE);
}
}
if (status != STATUS_PENDING) {
Irp->IoStatus.Status = status;
IoCompleteRequest(Irp, IO_NO_INCREMENT);
}
return status;
}
NTSTATUS
ParDeviceControl(
IN PDEVICE_OBJECT DeviceObject,
IN PIRP Irp
)
/*++
Routine Description:
This routine is the dispatch for device control requests.
Arguments:
DeviceObject - Supplies the device object.
Irp - Supplies the I/O request packet.
Return Value:
STATUS_SUCCESS - Success.
STATUS_PENDING - Request pending.
STATUS_BUFFER_TOO_SMALL - Buffer too small.
STATUS_INVALID_PARAMETER - Invalid io control request.
--*/
{
PIO_STACK_LOCATION irpSp;
PPAR_SET_INFORMATION setInfo;
NTSTATUS status;
PSERIAL_TIMEOUTS serialTimeouts;
PDEVICE_EXTENSION extension;
KIRQL oldIrql;
Irp->IoStatus.Information = 0;
irpSp = IoGetCurrentIrpStackLocation(Irp);
extension = DeviceObject->DeviceExtension;
switch (irpSp->Parameters.DeviceIoControl.IoControlCode) {
case IOCTL_PAR_SET_INFORMATION:
setInfo = Irp->AssociatedIrp.SystemBuffer;
if (irpSp->Parameters.DeviceIoControl.InputBufferLength <
sizeof(PAR_SET_INFORMATION)) {
status = STATUS_BUFFER_TOO_SMALL;
} else if (setInfo->Init != PARALLEL_INIT) {
status = STATUS_INVALID_PARAMETER;
} else {
status = STATUS_PENDING;
}
break;
case IOCTL_PAR_QUERY_INFORMATION :
if (irpSp->Parameters.DeviceIoControl.OutputBufferLength <
sizeof(PAR_QUERY_INFORMATION)) {
status = STATUS_BUFFER_TOO_SMALL;
} else {
status = STATUS_PENDING;
}
break;
case IOCTL_SERIAL_SET_TIMEOUTS:
serialTimeouts = Irp->AssociatedIrp.SystemBuffer;
if (irpSp->Parameters.DeviceIoControl.InputBufferLength <
sizeof(SERIAL_TIMEOUTS)) {
status = STATUS_BUFFER_TOO_SMALL;
} else if (serialTimeouts->WriteTotalTimeoutConstant < 2000) {
status = STATUS_INVALID_PARAMETER;
} else {
status = STATUS_PENDING;
}
break;
case IOCTL_SERIAL_GET_TIMEOUTS:
serialTimeouts = Irp->AssociatedIrp.SystemBuffer;
if (irpSp->Parameters.DeviceIoControl.OutputBufferLength <
sizeof(SERIAL_TIMEOUTS)) {
status = STATUS_BUFFER_TOO_SMALL;
} else {
//
// We don't need to synchronize the read.
//
RtlZeroMemory(serialTimeouts, sizeof(SERIAL_TIMEOUTS));
serialTimeouts->WriteTotalTimeoutConstant =
1000*extension->TimerStart;
Irp->IoStatus.Information = sizeof(SERIAL_TIMEOUTS);
status = STATUS_SUCCESS;
}
break;
case IOCTL_PAR_QUERY_DEVICE_ID:
if (irpSp->Parameters.DeviceIoControl.OutputBufferLength == 0) {
status = STATUS_BUFFER_TOO_SMALL;
} else {
status = STATUS_PENDING;
}
break;
case IOCTL_PAR_QUERY_DEVICE_ID_SIZE:
if (irpSp->Parameters.DeviceIoControl.OutputBufferLength <
sizeof(PAR_DEVICE_ID_SIZE_INFORMATION)) {
status = STATUS_BUFFER_TOO_SMALL;
} else {
status = STATUS_PENDING;
}
break;
default :
status = STATUS_INVALID_PARAMETER;
break;
}
if (status == STATUS_PENDING) {
IoAcquireCancelSpinLock(&oldIrql);
if (Irp->Cancel) {
IoReleaseCancelSpinLock(oldIrql);
status = STATUS_CANCELLED;
} else {
IoMarkIrpPending(Irp);
IoSetCancelRoutine(Irp, ParCancelRequest);
InsertTailList(&extension->WorkQueue, &Irp->Tail.Overlay.ListEntry);
IoReleaseCancelSpinLock(oldIrql);
KeReleaseSemaphore(&extension->RequestSemaphore, 0, 1, FALSE);
}
}
if (status != STATUS_PENDING) {
Irp->IoStatus.Status = status;
IoCompleteRequest(Irp, IO_NO_INCREMENT);
}
return status;
}
NTSTATUS
ParQueryInformationFile(
IN PDEVICE_OBJECT DeviceObject,
IN PIRP Irp
)
/*++
Routine Description:
This routine is used to query the end of file information on
the opened parallel port. Any other file information request
is retured with an invalid parameter.
This routine always returns an end of file of 0.
Arguments:
DeviceObject - Supplies the device object.
Irp - Supplies the I/O request packet.
Return Value:
STATUS_SUCCESS - Success.
STATUS_INVALID_PARAMETER - Invalid file information request.
STATUS_BUFFER_TOO_SMALL - Buffer too small.
--*/
{
NTSTATUS status;
PIO_STACK_LOCATION irpSp;
PFILE_STANDARD_INFORMATION stdInfo;
PFILE_POSITION_INFORMATION posInfo;
UNREFERENCED_PARAMETER(DeviceObject);
ParDump(
PARIRPPATH,
("PARALLEL: In query information file with Irp: %x\n",
Irp)
);
Irp->IoStatus.Information = 0;
irpSp = IoGetCurrentIrpStackLocation(Irp);
switch (irpSp->Parameters.QueryFile.FileInformationClass) {
case FileStandardInformation:
if (irpSp->Parameters.QueryFile.Length <
sizeof(FILE_STANDARD_INFORMATION)) {
status = STATUS_BUFFER_TOO_SMALL;
} else {
stdInfo = Irp->AssociatedIrp.SystemBuffer;
stdInfo->AllocationSize.QuadPart = 0;
stdInfo->EndOfFile = stdInfo->AllocationSize;
stdInfo->NumberOfLinks = 0;
stdInfo->DeletePending = FALSE;
stdInfo->Directory = FALSE;
Irp->IoStatus.Information = sizeof(FILE_STANDARD_INFORMATION);
status = STATUS_SUCCESS;
}
break;
case FilePositionInformation:
if (irpSp->Parameters.SetFile.Length <
sizeof(FILE_POSITION_INFORMATION)) {
status = STATUS_BUFFER_TOO_SMALL;
} else {
posInfo = Irp->AssociatedIrp.SystemBuffer;
posInfo->CurrentByteOffset.QuadPart = 0;
Irp->IoStatus.Information = sizeof(FILE_POSITION_INFORMATION);
status = STATUS_SUCCESS;
}
break;
default:
status = STATUS_INVALID_PARAMETER;
break;
}
Irp->IoStatus.Status = status;
ParDump(
PARIRPPATH,
("PARALLEL: About to complete IRP in query infomration\n"
"Irp: %x status: %x Information: %x\n",
Irp,
Irp->IoStatus.Status,
Irp->IoStatus.Information)
);
IoCompleteRequest(Irp, IO_NO_INCREMENT);
return status;
}
NTSTATUS
ParSetInformationFile(
IN PDEVICE_OBJECT DeviceObject,
IN PIRP Irp
)
/*++
Routine Description:
This routine is used to set the end of file information on
the opened parallel port. Any other file information request
is retured with an invalid parameter.
This routine always ignores the actual end of file since
the query information code always returns an end of file of 0.
Arguments:
DeviceObject - Supplies the device object.
Irp - Supplies the I/O request packet.
Return Value:
STATUS_SUCCESS - Success.
STATUS_INVALID_PARAMETER - Invalid file information request.
--*/
{
NTSTATUS status;
UNREFERENCED_PARAMETER(DeviceObject);
ParDump(
PARIRPPATH,
("PARALLEL: In set information with IRP: %x\n",
Irp)
);
Irp->IoStatus.Information = 0L;
if (IoGetCurrentIrpStackLocation(Irp)->
Parameters.SetFile.FileInformationClass == FileEndOfFileInformation) {
status = STATUS_SUCCESS;
} else {
status = STATUS_INVALID_PARAMETER;
}
Irp->IoStatus.Status = status;
ParDump(
PARIRPPATH,
("PARALLEL: About to complete IRP in set infomration\n"
"Irp: %x status: %x Information: %x\n",
Irp,
Irp->IoStatus.Status,
Irp->IoStatus.Information)
);
IoCompleteRequest(Irp, IO_NO_INCREMENT);
return status;
}
VOID
ParUnload(
IN PDRIVER_OBJECT DriverObject
)
/*++
Routine Description:
This routine loops through the device list and cleans up after
each of the devices.
Arguments:
DriverObject - Supplies the driver object.
Return Value:
None.
--*/
{
PDEVICE_OBJECT currentDevice;
PDEVICE_EXTENSION extension;
ParDump(
PARUNLOAD,
("PARALLEL: In ParUnload\n")
);
while (currentDevice = DriverObject->DeviceObject) {
extension = currentDevice->DeviceExtension;
if (extension->CreatedSymbolicLink) {
IoDeleteSymbolicLink(&extension->SymbolicLinkName);
RtlDeleteRegistryValue(RTL_REGISTRY_DEVICEMAP,
L"PARALLEL PORTS",
extension->SymbolicLinkName.Buffer);
ExFreePool(extension->SymbolicLinkName.Buffer);
}
ObDereferenceObject(extension->PortDeviceFileObject);
IoDeleteDevice(currentDevice);
}
ExFreePool(OpenCloseMutex);
}
VOID
ParDeferDeviceInitialization(
IN OUT PDEVICE_EXTENSION Extension
)
/*++
Routine Description:
This routine trys to queue a work item to initialize the printer which may
be attached to the parallel port. If there are not enough resources to
defer the work item it will try to initialize the port directly.
Arguments:
Extension - the device extension
Return Value:
None
--*/
{
ParDump(PARINITDEV, ("ParDeferDeviceInitialization(%lx)\n", Extension));
Extension->DeferredWorkItem = ExAllocatePool(NonPagedPool, sizeof(WORK_QUEUE_ITEM));
if(Extension->DeferredWorkItem != NULL) {
ParDump(PARINITDEV,
("ParDeferDeviceInitialization - work item allocated (%lx)\n",
Extension->DeferredWorkItem
));
ExInitializeWorkItem(Extension->DeferredWorkItem,
ParDeferredInitCallback,
Extension);
ExQueueWorkItem(Extension->DeferredWorkItem,
DelayedWorkQueue);
return;
}
ParDump(PARERRORS,
("ParDeferDeviceInitialization - work item not allocated."
"Directly initializing\n",
Extension->DeferredWorkItem
));
//
// Not enough resources to create the work item so we'll just do this the
// old fashioned way and chew up boot time
//
ParDeferredInitCallback((PVOID) Extension);
return;
}
Reference in New Issue View Git Blame Copy Permalink