410 lines
11 KiB
MonkeyC
410 lines
11 KiB
MonkeyC
;/*++
|
|
;
|
|
;Copyright (c) 1993 - Colorado Memory Systems, Inc.
|
|
;All Rights Reserved
|
|
;
|
|
;Module Name:
|
|
;
|
|
; q117log.h
|
|
;
|
|
;Abstract:
|
|
;
|
|
; Constant definitions for the I/O error code log values.
|
|
;
|
|
;
|
|
;Revision History:
|
|
;
|
|
;
|
|
;
|
|
;
|
|
;--*/
|
|
;
|
|
;#ifndef _Q117LOG_
|
|
;#define _Q117LOG_
|
|
;
|
|
;//
|
|
;// Status values are 32 bit values layed out as follows:
|
|
;//
|
|
;// 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
|
|
;// 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
|
|
;// +---+-+-------------------------+-------------------------------+
|
|
;// |Sev|C| Facility | Code |
|
|
;// +---+-+-------------------------+-------------------------------+
|
|
;//
|
|
;// where
|
|
;//
|
|
;// Sev - is the severity code
|
|
;//
|
|
;// 00 - Success
|
|
;// 01 - Informational
|
|
;// 10 - Warning
|
|
;// 11 - Error
|
|
;//
|
|
;// C - is the Customer code flag
|
|
;//
|
|
;// Facility - is the facility code
|
|
;//
|
|
;// Code - is the facility's status code
|
|
;//
|
|
;
|
|
MessageIdTypedef=NTSTATUS
|
|
|
|
SeverityNames=(Success=0x0:STATUS_SEVERITY_SUCCESS
|
|
Informational=0x1:STATUS_SEVERITY_INFORMATIONAL
|
|
Warning=0x2:STATUS_SEVERITY_WARNING
|
|
Error=0x3:STATUS_SEVERITY_ERROR
|
|
)
|
|
|
|
FacilityNames=(System=0x0
|
|
RpcRuntime=0x2:FACILITY_RPC_RUNTIME
|
|
RpcStubs=0x3:FACILITY_RPC_STUBS
|
|
Io=0x4:FACILITY_IO_ERROR_CODE
|
|
Q117=0x5:FACILITY_Q117_ERROR_CODE
|
|
)
|
|
|
|
|
|
|
|
MessageId=0x0064 Facility=Q117 Severity=Error SymbolicName=QIC117_UNUSTAPE
|
|
Language=English
|
|
Tape unusable (too many bad sectors).
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x0065 Facility=Q117 Severity=Error SymbolicName=QIC117_BADTAPE
|
|
Language=English
|
|
All copies of first block of bad block list bad on tape, cannot use this tape.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x0066 Facility=Q117 Severity=Error SymbolicName=QIC117_FMEMERR
|
|
Language=English
|
|
Insufficient memory to continue operation.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x0067 Facility=Q117 Severity=Warning SymbolicName=QIC117_TAPEFULL
|
|
Language=English
|
|
Tape is full.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x0068 Facility=Q117 Severity=Warning SymbolicName=QIC117_VOLFULL
|
|
Language=English
|
|
Volume directory full.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x0069 Facility=Q117 Severity=Error SymbolicName=QIC117_RDNCUNSC
|
|
Language=English
|
|
Error correction failed to recover data from tape.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x006a Facility=Q117 Severity=Warning SymbolicName=QIC117_ENDOFVOL
|
|
Language=English
|
|
End of data in volume.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x006b Facility=Q117 Severity=Warning SymbolicName=QIC117_FCODEERR
|
|
Language=English
|
|
Unexpected condition detected. Try operation again.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x006c Facility=Q117 Severity=Warning SymbolicName=QIC117_UPDERR
|
|
Language=English
|
|
Error occured while updating header segments - data corrupted.
|
|
Solution: Erase tape and re-save data.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x006d Facility=Q117 Severity=Warning SymbolicName=QIC117_INVALVOL
|
|
Language=English
|
|
Volume nonexistent.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x006e Facility=Q117 Severity=Informational SymbolicName=QIC117_NOVOLS
|
|
Language=English
|
|
No volumes on tape. Tape is empty.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x006f Facility=Q117 Severity=Warning SymbolicName=QIC117_UNFORMAT
|
|
Language=English
|
|
Tape not formatted. Please format tape before use.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x0070 Facility=Q117 Severity=Warning SymbolicName=QIC117_UNKNOWNFORMAT
|
|
Language=English
|
|
Unknown tape format. You must format this tape before use.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x0071 Facility=Q117 Severity=Warning SymbolicName=QIC117_BADBLK
|
|
Language=English
|
|
A data error occurred on the tape. Using error correction to recover data.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x0072 Facility=Q117 Severity=Error SymbolicName=QIC117_ENDTAPEERR
|
|
Language=English
|
|
End of tape (end of tape when not expected).
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x0073 Facility=Q117 Severity=Error SymbolicName=QIC117_DRIVEFLT
|
|
Language=English
|
|
Communication error between host and drive. Re-try operation.
|
|
If this does not work, try Shutting down the system and cycling power.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x0074 Facility=Q117 Severity=Informational SymbolicName=QIC117_WPROT
|
|
Language=English
|
|
Tape is write protected. Move the "SAFE" switch on the cartridge if
|
|
you wish to change the data on the tape.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x0075 Facility=Q117 Severity=Informational SymbolicName=QIC117_NOTAPE
|
|
Language=English
|
|
There is no cartridge detected in the drive. Make sure the tape is fully
|
|
inserted into the drive. The tape should "snap" into place and the light
|
|
on the drive will turn on for a while.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x0076 Facility=Q117 Severity=Warning SymbolicName=QIC117_SEEKERR
|
|
Language=English
|
|
Could not find the data requested on the tape (seek error). Try selecting
|
|
other files on the tape or try tape in a different drive.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x0077 Facility=Q117 Severity=Error SymbolicName=QIC117_NODRIVE
|
|
Language=English
|
|
Could not find the tape drive. Please verify connections to the drive and
|
|
re-start the system.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x0078 Facility=Q117 Severity=Error SymbolicName=QIC117_INVALCMD
|
|
Language=English
|
|
Communication error between host and drive. Re-try operation.
|
|
If this does not work, try Shutting down the system and cycling power.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x0079 Facility=Q117 Severity=Error SymbolicName=QIC117_CODEERR
|
|
Language=English
|
|
Unexpected error during tape driver operation. Re-try operation or re-start
|
|
your computer and try again.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x007a Facility=Q117 Severity=Error SymbolicName=QIC117_NECFLT
|
|
Language=English
|
|
Floppy controller failed to respond or driver could not communicate with
|
|
the floppy controller. Check that the IRQ is set correctly.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x007b Facility=Q117 Severity=Error SymbolicName=QIC117_NOFDC
|
|
Language=English
|
|
Floppy controller failed to respond or driver could not communicate with
|
|
the floppy controller. Check that the IRQ is set correctly.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x007c Facility=Q117 Severity=Error SymbolicName=QIC117_BADFMT
|
|
Language=English
|
|
Tape drive failed to correctly format the tape. Check that the tape
|
|
drive is installed correctly.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x007d Facility=Q117 Severity=Error SymbolicName=QIC117_CMDFLT
|
|
Language=English
|
|
Device not ready.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x007e Facility=Q117 Severity=Error SymbolicName=QIC117_BADNEC
|
|
Language=English
|
|
NEC chip out of spec.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x007f Facility=Q117 Severity=Error SymbolicName=QIC117_BADREQ
|
|
Language=English
|
|
Invalid logical sector specification in read/write.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x0080 Facility=Q117 Severity=Error SymbolicName=QIC117_TOOFAST
|
|
Language=English
|
|
Computer is too fast for current driver software.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x0081 Facility=Q117 Severity=Error SymbolicName=QIC117_NODATA
|
|
Language=English
|
|
Tape appears to be unformatted.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x0082 Facility=Q117 Severity=Warning SymbolicName=QIC117_DABORT
|
|
Language=English
|
|
ClearIO was called and the queue has been cleared.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x0083 Facility=Q117 Severity=Error SymbolicName=QIC117_TAPEFLT
|
|
Language=English
|
|
Tape drive fault.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x0084 Facility=Q117 Severity=Error SymbolicName=QIC117_UNSPRATE
|
|
Language=English
|
|
speed sense failed (unsupported transfer rate).
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x0085 Facility=Q117 Severity=Warning SymbolicName=QIC117_ALREADY
|
|
Language=English
|
|
Driver already installed in another task.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x0086 Facility=Q117 Severity=Error SymbolicName=QIC117_TOONOISY
|
|
Language=English
|
|
Environment too noisy.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x0087 Facility=Q117 Severity=Error SymbolicName=QIC117_TIMEOUT
|
|
Language=English
|
|
Time out error.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x0088 Facility=Q117 Severity=Error SymbolicName=QIC117_BADMARK
|
|
Language=English
|
|
Deleted data address mark found.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x0089 Facility=Q117 Severity=Informational SymbolicName=QIC117_NEWCART
|
|
Language=English
|
|
New cartridge has been inserted.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x008a Facility=Q117 Severity=Informational SymbolicName=QIC117_WRONGFMT
|
|
Language=English
|
|
The tape being used is incompatible with this drive.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x008b Facility=Q117 Severity=Informational SymbolicName=QIC117_FMTMISMATCH
|
|
Language=English
|
|
Same as WrongFmt, except occurs on tape linking.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x008c Facility=Q117 Severity=Informational SymbolicName=QIC117_INCOMPTAPEFMT
|
|
Language=English
|
|
QIC80 formatted tape detected in a QIC40 drive or QIC3020 in a QIC3010 drive.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x008d Facility=Q117 Severity=Informational SymbolicName=QIC117_SCSIFMTMSMTCH
|
|
Language=English
|
|
QIC350 Tape detected during a SCSI BACKUP.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x008e Facility=Q117 Severity=Informational SymbolicName=QIC117_QIC40INEAGLE
|
|
Language=English
|
|
QIC40 formatted tape is detected in a 3020.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x008f Facility=Q117 Severity=Informational SymbolicName=QIC117_QIC80INEAGLE
|
|
Language=English
|
|
QIC80 formatted tape is detected in an 3020.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x0090 Facility=Q117 Severity=Warning SymbolicName=QIC117_CONTROLLERBUSY
|
|
Language=English
|
|
Floppy controller is in use by another device.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x0091 Facility=Q117 Severity=Error SymbolicName=QIC117_INQUE
|
|
Language=English
|
|
If request is currently queued to low-level driver.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x0092 Facility=Q117 Severity=Error SymbolicName=QIC117_SPLITREQUESTS
|
|
Language=English
|
|
If request is split and queued.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x0093 Facility=Q117 Severity=Informational SymbolicName=QIC117_EARLYWARNING
|
|
Language=English
|
|
Early warning reported.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x0094 Facility=Q117 Severity=Informational SymbolicName=QIC117_FIRMWARE
|
|
Language=English
|
|
An unknown firmware error has occurred.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x0095 Facility=Q117 Severity=Informational SymbolicName=QIC117_INCOMMEDIA
|
|
Language=English
|
|
Incompatible or unknown media.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x0096 Facility=Q117 Severity=Error SymbolicName=QIC117_BOGUS
|
|
Language=English
|
|
Unmapped error value returned from device %1
|
|
.
|
|
|
|
MessageId=0x0097 Facility=Q117 Severity=Error SymbolicName=QIC117_NO_BUFFERS
|
|
Language=English
|
|
The driver could not allocate memory for data transfer buffers.
|
|
Try restarting the system. If this error persists, more system RAM may
|
|
be required.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x0098 Facility=Q117 Severity=Error SymbolicName=QIC117_WRITE_FAULT
|
|
Language=English
|
|
A write error occurred near end of tape that caused this session to terminate.
|
|
The block was added to the bad sector map, and future sessions should not have
|
|
this problem.
|
|
From device: %1
|
|
.
|
|
|
|
MessageId=0x0099 Facility=Q117 Severity=Error SymbolicName=QIC117_DESPOOLED
|
|
Language=English
|
|
An error occurred on the drive that could the tape has spun off the reel. Verify
|
|
that the cartridge in the drive has tape visible behind the door. If this
|
|
error occurs when a good cartridge is present, then the drive has a defective
|
|
tape hole sensor or there is an obstruction related to the sensor.
|
|
From device: %1
|
|
.
|
|
|
|
;#endif /* _Q117LOG_ */
|