1242 lines
47 KiB
INI
1242 lines
47 KiB
INI
;***********************************************************************
|
|
; HT Communications DSU41/42 56kbps Digital Modem WindowsNT Setup File.
|
|
;***********************************************************************
|
|
[Identification]
|
|
OptionType = NetAdapter
|
|
|
|
;***********************************************************************
|
|
;
|
|
;***********************************************************************
|
|
[PlatformsSupported]
|
|
ISA
|
|
EISA
|
|
"Jazz-Internal Bus"
|
|
|
|
;***********************************************************************
|
|
;
|
|
;***********************************************************************
|
|
[Options]
|
|
HTDSU41
|
|
; HTDSU42 FIXME - The HTDSU42 does not yet support HDLC framing
|
|
|
|
;***********************************************************************
|
|
;
|
|
;***********************************************************************
|
|
[FileConstants]
|
|
InfName = "OEMHTDSU.INF"
|
|
UtilityInf = "UTILITY.INF"
|
|
ParamInf = "NCPARAM.INF"
|
|
subroutineinf = "SUBROUTN.INF"
|
|
SoftwareType = "driver"
|
|
Exit_Code = 0
|
|
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
|
|
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
|
|
Manufacturer = "HT Communications"
|
|
ProductMajorVersion = "3"
|
|
ProductMinorVersion = "1"
|
|
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
|
|
ProductSoftwareName = "HTDSU41"
|
|
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\HTDSU41.sys"
|
|
NetRuleSoftwareType = "HTDSU41Sys HTDSU41Driver"
|
|
NetRuleSoftwareUse = $(SoftwareType)
|
|
NetRuleSoftwareBindForm = """HTDSU41Sys"" yes no container"
|
|
NetRuleSoftwareClass = {"HTDSU41Driver basic"}
|
|
NetRuleSoftwareBindable = {"HTDSU41Driver HTDSU41Adapter non exclusive 100"}
|
|
ProductHardwareName = "HTDSU41"
|
|
NetRuleHardwareBindForm = " yes yes container"
|
|
NetRuleHardwareHTDSU41Type = "HTDSU41 HTDSU41Adapter"
|
|
NetRuleHardwareHTDSU41Class = {"HTDSU41Adapter basic"}
|
|
BindableHTDSU41Txt = {"HTDSU41Driver HTDSU41Adapter non exclusive 100"}
|
|
DeviceMap = "HARDWARE\DEVICEMAP"
|
|
TapiDevices = "TAPI DEVICES"
|
|
TapiDeviceKey = $(ProductHardwareName)
|
|
TapiMediaType = "Sw56_"
|
|
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"+
|
|
$(ProductSoftwareName)"\CurrentVersion"
|
|
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)+
|
|
"\Parameters"
|
|
|
|
; FIXME - default to dialup line mode = 0 -- leased line = 1
|
|
; In dialup mode we need to write the parameters so RAS/TAPI will bind to us
|
|
; In leased mode we need to write the parameters so NDIS/WAN will bind to us
|
|
; Right now this file only supports dialup mode - leased line changes are needed
|
|
LineType = 0
|
|
|
|
; FIXME - Set to zero before release
|
|
DebugFlags = 0
|
|
|
|
RAM_Addr_List = {851968, 917504, 913408, 847872}
|
|
IRQ_List = {15, 12, 11, 10, 4, 3}
|
|
|
|
; Default here is 1=57.6kbps 0=max 2=38.4k 3=19.2k 4=9.6k
|
|
Rate_Strings = {"Max kbps", "57.6 kbps", "38.4 kbps", "19.2 kpbs", "9.6 kbps"}
|
|
Line_Rates = {0, 1, 2, 3, 4}
|
|
LineRate = 0
|
|
|
|
;***********************************************************************
|
|
;
|
|
;***********************************************************************
|
|
[GeneralConstants]
|
|
from = ""
|
|
to = ""
|
|
ExitCodeOk = 0
|
|
ExitCodeCancel = 1
|
|
ExitCodeFatal = 2
|
|
KeyNull = ""
|
|
MAXIMUM_ALLOWED = 33554432
|
|
RegistryErrorIndex = NO_ERROR
|
|
KeyProduct = ""
|
|
KeyParameters = ""
|
|
TRUE = 1
|
|
FALSE = 0
|
|
NoTitle = 0
|
|
ExitState = "Active"
|
|
OldVersionExisted = $(FALSE)
|
|
DriverPath = $(!STF_NTPATH)\drivers
|
|
|
|
;***********************************************************************
|
|
;
|
|
;***********************************************************************
|
|
[Date]
|
|
Now = {} ? $(!LIBHANDLE) GetSystemDate
|
|
|
|
;***********************************************************************
|
|
;
|
|
;***********************************************************************
|
|
[Identify]
|
|
Read-Syms Identification
|
|
Set Status = STATUS_SUCCESSFUL
|
|
Set Identifier = $(OptionType)
|
|
Set Media = #("Source Media Descriptions", 1, 1)
|
|
Return $(Status) $(Identifier) $(Media)
|
|
|
|
;***********************************************************************
|
|
;
|
|
;***********************************************************************
|
|
[ReturnOptions]
|
|
Set Status = STATUS_FAILED
|
|
Set OptionList = {}
|
|
Set OptionTextList = {}
|
|
Set LanguageList = ^(LanguagesSupported, 1)
|
|
|
|
IfContains(i) $($0) in $(LanguageList)
|
|
IfStr(i) $($1) == ""
|
|
GoTo SetOptions
|
|
EndIf
|
|
Set PlatformList = ^(PlatformsSupported, 1)
|
|
IfContains(i) $($1) in $(PlatformList)
|
|
GoTo SetOptions
|
|
Else
|
|
Set Status = STATUS_NOTSUPPORTED
|
|
GoTo ExitReturnOptions
|
|
EndIf
|
|
Else
|
|
Set Status = STATUS_NOLANGUAGE
|
|
GoTo ExitReturnOptions
|
|
EndIf
|
|
|
|
SetOptions = +
|
|
Set OptionList = ^(Options, 1)
|
|
Set OptionTextList = ^(OptionsText$($0), 1)
|
|
Set Status = STATUS_SUCCESSFUL
|
|
|
|
ExitReturnOptions = +
|
|
Return $(Status) $(OptionList) $(OptionTextList)
|
|
|
|
;***********************************************************************
|
|
;
|
|
;***********************************************************************
|
|
[InstallOption]
|
|
Set Status = STATUS_FAILED
|
|
Set Option = $($1)
|
|
Set SrcDir = $($2)
|
|
Set RasDir = $($2)
|
|
Set AddCopy = $($3)
|
|
Set DoCopy = $($4)
|
|
Set DoConfig = $($5)
|
|
Set LanguageList = ^(LanguagesSupported, 1)
|
|
|
|
IfContains(i) $($0) NOT-IN $(LanguageList)
|
|
Return STATUS_NOLANGUAGE
|
|
EndIf
|
|
;
|
|
; FIXME - make sure this flag is disabled before shipping
|
|
;
|
|
Set OldDebugControl = $(!DebugOutputControl)
|
|
; Set !DebugOutputControl = 1
|
|
|
|
Set-Subst LF = "\n"
|
|
|
|
Read-Syms GeneralConstants
|
|
Read-Syms FileConstants
|
|
Read-Syms DialogConstants$(!STF_LANGUAGE)
|
|
|
|
IfStr(i) $(!NTN_Origination) == "NCPA"
|
|
Set Continue = $(OK)
|
|
EndIf
|
|
|
|
Read-Syms FileConstants$(!STF_LANGUAGE)
|
|
Detect Date
|
|
Set-Title $(FunctionTitle)$(Option)
|
|
|
|
Set to = Begin
|
|
Set from = Begin
|
|
Set CommonStatus = STATUS_SUCCESSFUL
|
|
|
|
EndWait
|
|
|
|
;***********************************************************************
|
|
;
|
|
;***********************************************************************
|
|
Begin = +
|
|
Set ActivateDetection = FALSE
|
|
IfStr(i) $(!NTN_InstallMode) == deinstall
|
|
Set StartLabel = RemoveAdapter
|
|
Else-IfStr(i) $(!NTN_InstallMode) == Update
|
|
Set StartLabel = UpgradeSoftware
|
|
Else-IfStr(i) $(!NTN_InstallMode) == bind
|
|
Set StartLabel = BindingAdapter
|
|
Else-IfStr(i) $(!NTN_InstallMode) == configure
|
|
Set StartLabel = ConfigureAdapter
|
|
Set ActivateDetection = TRUE
|
|
Set CommonStatus = STATUS_REBOOT
|
|
IfStr(i) $(ProductKeyName) == $(!NTN_RegBase)
|
|
Debug-Output $(InfName)": Cannot configure the EtherWORKS 3 driver software."
|
|
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
|
|
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
|
|
Debug-Output $(InfName)": ShellCode error: cannot get an error string."
|
|
GoTo ShellCodeError
|
|
EndIf
|
|
Set Error = $($R0)
|
|
Set from = end
|
|
Set to = end
|
|
GoTo NonFatalInfo
|
|
EndIf
|
|
Else
|
|
Set StartLabel = InstallAdapter
|
|
Set ActivateDetection = TRUE
|
|
Set OEM_ABANDON_OPTIONS = {}
|
|
Set OEM_ABANDON_SOFTWARE = FALSE
|
|
Set OEM_ABANDON_ON = TRUE
|
|
EndIf
|
|
|
|
Debug-Output $(InfName)": =================================================="
|
|
Debug-Output $(InfName)": STF_CWDIR is: "$(!STF_CWDIR)
|
|
Debug-Output $(InfName)": STF_LANGUAGE is: "$(!STF_LANGUAGE)
|
|
Debug-Output $(InfName)": Option is: "$(Option)
|
|
Debug-Output $(InfName)": !STF_NCDETECT is: "$(!STF_NCDETECT)
|
|
Debug-Output $(InfName)": !STF_NCOPTION is: "$(!STF_NCOPTION)
|
|
Debug-Output $(InfName)": !STF_NCDETCARD is: "$(!STF_NCDETCARD)
|
|
Debug-Output $(InfName)": !STF_NCDETINFO is: "$(!STF_NCDETINFO)
|
|
Debug-Output $(InfName)": =================================================="
|
|
|
|
Set DetectedCard = FALSE
|
|
IfStr(i) $(ActivateDetection) != TRUE
|
|
GoTo $(StartLabel)
|
|
EndIf
|
|
|
|
Debug-Output $(InfName)": Calling Param_SetDefaults"
|
|
Shell $(ParamInf) Param_SetDefaults {}
|
|
|
|
Shell $(ParamInf) HexListFromDecList $(RAM_Addr_List)
|
|
Set RAM_Hex_List = $($R0)
|
|
|
|
IfStr(i) $(!STF_NCDETECT) == YES
|
|
IfStr(i) $(!STF_NCOPTION) == $(Option)
|
|
Set DetectedCard = TRUE
|
|
Debug-Output $(InfName)": Setting DetectedCard to TRUE"
|
|
EndIf
|
|
EndIf
|
|
|
|
Shell "" DebugConfiguration "After parameter querying"
|
|
Set from = FatalError
|
|
Set to = FatalError
|
|
GoTo $(StartLabel)
|
|
|
|
;***********************************************************************
|
|
;
|
|
;***********************************************************************
|
|
InstallAdapter = +
|
|
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
|
|
IfStr $(KeyProduct) != $(KeyNull)
|
|
CloseRegKey $(KeyProduct)
|
|
IfStr(i) !(NTN_RegBase) == $(ProductKeyName)
|
|
Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
|
|
$(ProductVersion)
|
|
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
|
|
Debug-Output $(InfName)": ShellCode error: cannot get an error string."
|
|
GoTo ShellCodeError
|
|
EndIf
|
|
GoTo end
|
|
Else
|
|
Shell $(UtilityInf), CardExistedDlg
|
|
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
|
|
Debug-Output $(InfName)": ShellCode error: cannot get an error string."
|
|
GoTo ShellCodeError
|
|
EndIf
|
|
IfStr(i) $($R1) != "OK"
|
|
Set CommonStatus = STATUS_USERCANCEL
|
|
GoTo end
|
|
EndIf
|
|
Set OldVersionExisted = $(TRUE)
|
|
EndIf
|
|
EndIf
|
|
|
|
Set CurrParamSettings = {}
|
|
IfStr(i) $(DetectedCard) != TRUE
|
|
GoTo AdapterSetup
|
|
EndIf
|
|
|
|
StartWait
|
|
Shell $(ParamInf) Param_QueryCard $(!STF_NCDETCARD)
|
|
EndWait
|
|
|
|
IfStr(i) $($R0) != STATUS_SUCCESSFUL
|
|
GoTo AdapterSetup
|
|
EndIf
|
|
|
|
Set DetectedParams = $($R1)
|
|
Debug-Output $(InfName)": Calling Param_SetDefaults to merge detected params"
|
|
Shell $(ParamInf) Param_SetDefaults $(DetectedParams)
|
|
GoTo AdapterSetup
|
|
|
|
;***********************************************************************
|
|
;
|
|
;***********************************************************************
|
|
ConfigureAdapter = +
|
|
IfStr $(KeyProduct) == $(KeyNull)
|
|
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
|
|
IfStr $(KeyProduct) == $(KeyNull)
|
|
Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
|
|
Debug-Output $(InfName)": Cannot find component product key"
|
|
GoTo FatalRegistry
|
|
EndIf
|
|
EndIf
|
|
|
|
Debug-Output $(InfName)": Shelling to FindService"
|
|
Shell $(UtilityInf) FindService, $(KeyProduct)
|
|
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
|
|
Debug-Output $(InfName)": FindService shell failure"
|
|
GoTo ShellCodeError
|
|
EndIf
|
|
IfStr(i) $($R0) != NO_ERROR
|
|
Debug-Output $(InfName)": FindService Shell error: "$($R0)
|
|
GoTo FatalRegistry
|
|
EndIf
|
|
|
|
Set KeyParameters = $($R2)
|
|
CloseRegKey $($R1)
|
|
IfStr $(KeyParameters) == $(KeyNull)
|
|
Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
|
|
Debug-Output $(InfName)": Cannot find component service"
|
|
GoTo FatalRegistry
|
|
EndIf
|
|
|
|
Set OldVersionExisted = $(TRUE)
|
|
Set ValueName = ""
|
|
Set ValueData = ""
|
|
Set ValueStr = ""
|
|
Set ValueList = {}
|
|
EnumRegValue $(KeyParameters) ValueList
|
|
ForListDo $(ValueList)
|
|
Set ValueItem = $($)
|
|
Set ValueName = *($(ValueItem),1)
|
|
Set ValueData = *($(ValueItem),4)
|
|
Debug-Output $(InfName)": "$(ValueName)"="$(ValueData)
|
|
IfStr(i) $(ValueName) == "AddressList"
|
|
Set TapiAddressList = $(ValueData)
|
|
Else-IfStr(i) $(ValueName) == "RamBaseAddress"
|
|
Set RamBaseAddress = $(ValueData)
|
|
Else-IfStr(i) $(ValueName) == "InterruptNumber"
|
|
Set InterruptNumber = $(ValueData)
|
|
Else-IfStr(i) $(ValueName) == "LineType"
|
|
Set LineType = $(ValueData)
|
|
Else-IfStr(i) $(ValueName) == "LineRate"
|
|
Set LineRate = $(ValueData)
|
|
Else-IfStr(i) $(ValueName) == "BusNumber"
|
|
Set BusNumber = $(ValueData)
|
|
Else-IfStr(i) $(ValueName) == "BusType"
|
|
Set BusType = $(ValueData)
|
|
EndIf
|
|
EndForListDo
|
|
Shell $(ParamInf) Param_SaveValues
|
|
Set CurrParamSettings = $($R0)
|
|
|
|
;***********************************************************************
|
|
;
|
|
;***********************************************************************
|
|
AdapterSetup = +
|
|
Shell "" DebugConfiguration "before displaying dialog"
|
|
Set from = AdapterOptions
|
|
Set InterruptNumber = *($(IRQ_List), ~($(IRQ_List),$(InterruptNumber)))
|
|
Set RAM_Hex_Value = *($(RAM_Hex_List), ~($(RAM_Addr_List),$(RamBaseAddress)))
|
|
Set RateString = *($(Rate_Strings), ~($(Line_Rates),$(LineRate)))
|
|
Shell $(ParamInf) Param_ParameterConfidence
|
|
IfStr(i) $($R0) != STATUS_SUCCESSFUL
|
|
Debug-Output $(InfName)": parameter confidence too low to bypass configuration"
|
|
GoTo AdapterOptions
|
|
EndIf
|
|
IfStr(i) $(DetectedCard) == TRUE
|
|
IfStr(i) $(!STF_INSTALL_MODE) != CUSTOM
|
|
GoTo AdapterVerify
|
|
EndIf
|
|
EndIf
|
|
|
|
;***********************************************************************
|
|
;
|
|
;***********************************************************************
|
|
AdapterOptions = +
|
|
Read-Syms FileDependentDlg$(!STF_LANGUAGE)
|
|
UI Start "InputDlg"
|
|
IfStr(i) $(DLGEVENT) == "CONTINUE"
|
|
Set InterruptNumber = $(Combo1Out)
|
|
Set RAM_Hex_Value = $(Combo2Out)
|
|
Set RamBaseAddress = *($(RAM_Addr_List), ~($(RAM_Hex_List),$(RAM_Hex_Value)))
|
|
Set RateString = $(Combo3Out)
|
|
Set LineRate = *($(Line_Rates), ~($(Rate_Strings),$(RateString)))
|
|
ui pop 1
|
|
Else-IfStr(i) $(DLGEVENT) == "BACK"
|
|
Set CommonStatus = STATUS_USERCANCEL
|
|
Debug-Output $(InfName)": Action: exit. Bye."
|
|
ui pop 1
|
|
GoTo end
|
|
Else
|
|
Debug-Output $(InfName)": Action: unknown. Bye."
|
|
ui pop 1
|
|
GoTo end
|
|
EndIf
|
|
IfStr(i) $(!STF_NCDETINFO) == {}
|
|
Shell $(UtilityInf),GetBusTypeDialog,$(ProductHardware$(Option)Description) $(BusType) $(BusNumber)
|
|
ifInt $($ShellCode) != $(!SHELL_CODE_OK)
|
|
Debug-Output $(InfName)": ShellCode error."
|
|
GoTo ShellCodeError
|
|
EndIf
|
|
Set BusType = $($R1)
|
|
Set BusNumber = $($R2)
|
|
Else
|
|
Set BusType = *($(!STF_NCDETINFO),5)
|
|
Set BusNumber = *($(!STF_NCDETINFO),6)
|
|
EndIf
|
|
|
|
;***********************************************************************
|
|
;
|
|
;***********************************************************************
|
|
AdapterVerify = +
|
|
Shell "" DebugConfiguration "after running dialog"
|
|
IfStr(i) $(DetectedCard) != TRUE
|
|
Shell $(ParamInf) Param_SaveValues
|
|
Set NewParamSettings = $($R0)
|
|
IfStr(i) $(CurrParamSettings) == {}
|
|
Set DiffParamSettings = $(NewParamSettings)
|
|
Else
|
|
Shell $(ParamInf) Param_DiffValues $(CurrParamSettings)
|
|
Set DiffParamSettings = $($R0)
|
|
EndIf
|
|
Debug-Output $(InfName)": Calling Param_VerifyResources"
|
|
Shell $(ParamInf) Param_VerifyResources $(DiffParamSettings)
|
|
IfStr(i) $($R0) == STATUS_SUCCESSFUL
|
|
Debug-Output $(InfName)": Param_VerifyResources succeeded"
|
|
GoTo SkipOptions
|
|
EndIf
|
|
Else
|
|
Set CardVerifyIndex = $(!STF_NCDETCARD)
|
|
Debug-Output $(InfName)": Calling Param_VerifyCard"
|
|
Shell $(ParamInf) Param_VerifyCard $(!STF_NCDETCARD)
|
|
IfStr(i) $($R0) == STATUS_SUCCESSFUL
|
|
Debug-Output $(InfName)": Param_VerifyCard succeeded"
|
|
GoTo SkipOptions
|
|
EndIf
|
|
EndIf
|
|
|
|
Set from = AdapterOptions
|
|
Set to = SkipOptions
|
|
Shell $(UtilityInf),RegistryErrorString,VERIFY_WARNING
|
|
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
|
|
Debug-Output $(InfName)": ShellCode error: cannot get an error string."
|
|
GoTo ShellCodeError
|
|
EndIf
|
|
Set Error = $($R0)
|
|
GoTo WarningMsg
|
|
|
|
;***********************************************************************
|
|
;
|
|
;***********************************************************************
|
|
SkipOptions =+
|
|
IfInt $(OldVersionExisted) == $(TRUE)
|
|
IfStr(i) $(!NTN_InstallMode) == configure
|
|
GoTo WriteParameters
|
|
EndIf
|
|
EndIf
|
|
StartWait
|
|
IfInt $(OldVersionExisted) == $(FALSE)
|
|
IfStr(i) $(!NTN_InstallMode) == "install"
|
|
IfStr(i) $(DoCopy) == "YES"
|
|
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
|
|
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
|
|
GoTo ShellCodeError
|
|
Else-IfStr(i) $($R0) == STATUS_FAILED
|
|
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
|
|
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
|
|
GoTo ShellCodeError
|
|
EndIf
|
|
Set Error = $($R0)
|
|
GoTo FatalError
|
|
Else-IfStr(i) $($R0) == STATUS_USERCANCEL
|
|
GoTo SuccessfulOption
|
|
EndIf
|
|
Set SrcDir = $($R1)
|
|
EndIf
|
|
|
|
Install "Install-Option"
|
|
IfStr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
|
|
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
|
|
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
|
|
GoTo ShellCodeError
|
|
EndIf
|
|
Set Error = $($R0)
|
|
GoTo FatalError
|
|
EndIf
|
|
EndIf
|
|
|
|
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
|
|
$(ProductSoftwareName), +
|
|
$(ProductSoftwareName), +
|
|
$(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
|
|
$(ProductSoftwareImagePath), "kernelautostart", "NDIS", {}, "",+
|
|
$(NetEventDLL)
|
|
Set OEM_ABANDON_SOFTWARE = TRUE
|
|
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
|
|
Debug-Output $(InfName)": ShellCode error"
|
|
GoTo ShellCodeError
|
|
EndIf
|
|
Set RegistryErrorIndex = $($R0)
|
|
Set KeyProduct = $($R1)
|
|
Set SoftNetRulesKey = $($R2)
|
|
CloseRegKey $($R3)
|
|
CloseRegKey $($R4)
|
|
CloseRegKey $($R5)
|
|
|
|
IfStr(i) $(RegistryErrorIndex) != NO_ERROR
|
|
EndWait
|
|
Debug-Output $(InfName)": Registry error: add software components"
|
|
CloseRegKey $(KeyProduct)
|
|
CloseRegKey $(SoftNetRulesKey)
|
|
GoTo FatalRegistry
|
|
EndIf
|
|
|
|
Set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
|
|
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
|
|
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
|
|
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
|
|
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
|
|
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
|
|
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
|
|
Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
|
|
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
|
|
Debug-Output $(InfName)": ShellCode error."
|
|
GoTo ShellCodeError
|
|
EndIf
|
|
Set RegistryErrorIndex = $($R0)
|
|
IfStr(i) $(RegistryErrorIndex) != NO_ERROR
|
|
EndWait
|
|
Debug-Output $(InfName)": Registry error: add value list."
|
|
CloseRegKey $(KeyProduct)
|
|
CloseRegKey $(SoftNetRulesKey)
|
|
GoTo FatalRegistry
|
|
EndIf
|
|
|
|
Set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
|
|
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
|
|
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
|
|
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
|
|
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(Bindable$(Option)Txt)}, +
|
|
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
|
|
Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
|
|
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
|
|
Debug-Output $(InfName)": ShellCode error."
|
|
GoTo ShellCodeError
|
|
EndIf
|
|
Set RegistryErrorIndex = $($R0)
|
|
CloseRegKey $(KeyProduct)
|
|
CloseRegKey $(SoftNetRulesKey)
|
|
IfStr(i) $(RegistryErrorIndex) != NO_ERROR
|
|
EndWait
|
|
Debug-Output $(InfName)": Resgitry error: add value list."
|
|
GoTo FatalRegistry
|
|
EndIf
|
|
EndIf
|
|
|
|
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
|
|
IfInt $($R4) != -1
|
|
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
|
|
EndIf
|
|
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
|
|
Debug-Output $(InfName)": Cannot add hardware component"
|
|
GoTo ShellCodeError
|
|
EndIf
|
|
Set RegistryErrorIndex = $($R0)
|
|
IfStr(i) $(RegistryErrorIndex) != NO_ERROR
|
|
EndWait
|
|
Debug-Output $(InfName)": Registry error: add hardware component"
|
|
CloseRegKey $($R1)
|
|
CloseRegKey $($R2)
|
|
CloseRegKey $($R3)
|
|
GoTo FatalRegistry
|
|
EndIf
|
|
|
|
Set KeyParameters = $($R3)
|
|
Set KeyAdapterRules = $($R2)
|
|
Set AdapterNumber = $($R4)
|
|
Set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
|
|
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
|
|
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
|
|
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
|
|
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
|
|
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
|
|
Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList)
|
|
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
|
|
Debug-Output $(InfName)": ShellCode error"
|
|
GoTo ShellCodeError
|
|
EndIf
|
|
CloseRegKey $($R1)
|
|
|
|
;;; You need one address entry in the list for each channel on your device.
|
|
;;; FIXME - at this point RAS requires there to be one logical line per address
|
|
;;; FIXME - so the address (channel) number is ignored and the line number is used
|
|
Set TapiAddressList = {$(AdapterNumber)"-1-0"}
|
|
IfStr(i) $(Option) == HTDSU42
|
|
Set TapiAddressList = >($(TapiAddressList),$(AdapterNumber)"-2-0")
|
|
EndIf
|
|
|
|
Set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
|
|
Set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
|
|
Set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+
|
|
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
|
|
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, +
|
|
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
|
|
Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
|
|
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
|
|
Debug-Output $(InfName)": ShellCode error."
|
|
GoTo ShellCodeError
|
|
EndIf
|
|
Set RegistryErrorIndex = $($R0)
|
|
IfStr(i) $(RegistryErrorIndex) != NO_ERROR
|
|
EndWait
|
|
Debug-Output $(InfName)": Resgitry error: add value list."
|
|
CloseRegKey $(KeyParameters)
|
|
CloseRegKey $(KeyAdapterRules)
|
|
GoTo FatalRegistry
|
|
EndIf
|
|
CloseRegKey $(KeyAdapterRules)
|
|
|
|
GoTo WriteParameters
|
|
|
|
;***********************************************************************
|
|
;
|
|
;***********************************************************************
|
|
WriteParameters = +
|
|
Set NewValueList = {+
|
|
{AddressList,$(NoTitle),$(!REG_VT_MULTI_SZ),$(TapiAddressList)},+
|
|
{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
|
|
{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusType)},+
|
|
{DeviceName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
|
|
{InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(InterruptNumber)},+
|
|
{LineType,$(NoTitle),$(!REG_VT_DWORD),$(LineType)},+
|
|
{LineRate,$(NoTitle),$(!REG_VT_DWORD),$(LineRate)},+
|
|
{MediaType,$(NoTitle),$(!REG_VT_SZ),$(TapiMediaType)},+
|
|
{RamBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(RamBaseAddress)}+
|
|
}
|
|
;;; {DebugFlags,$(NoTitle),$(!REG_VT_DWORD),$(DebugFlags)},+
|
|
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
|
|
CloseRegKey $(KeyParameters)
|
|
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
|
|
Debug-Output $(InfName)": ShellCode error."
|
|
GoTo ShellCodeError
|
|
EndIf
|
|
Set RegistryErrorIndex = $($R0)
|
|
IfStr(i) $(RegistryErrorIndex) != NO_ERROR
|
|
Debug-Output $(InfName)": Registry error: Add value list"
|
|
GoTo FatalRegistry
|
|
EndIf
|
|
;
|
|
; Create the HARDWARE\DEVICEMAP\TAPI DEVICES\HTDSU41 key
|
|
;
|
|
OpenRegKey $(!REG_H_LOCAL) "" "HARDWARE\DEVICEMAP" $(MAXIMUM_ALLOWED) BaseKey
|
|
shell "" HtCreateRegKey $(BaseKey) "TAPI DEVICES\HTDSU41"
|
|
IfStr(i) $($R0) != NO_ERROR
|
|
Debug-Output $(InfName)": Error creating registry key!"
|
|
GoTo FatalRegistry
|
|
EndIf
|
|
Set TapiDeviceKey = $($R1)
|
|
Set NewValueList = {+
|
|
{Address,$(NoTitle),$(!REG_VT_MULTI_SZ),$(TapiAddressList)},+
|
|
{"Media Type",$(NoTitle),$(!REG_VT_SZ),$(TapiMediaType)}}
|
|
Shell $(UtilityInf), AddValueList, $(TapiDeviceKey), $(NewValueList)
|
|
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
|
|
Debug-Output $(InfName)": ShellCode error."
|
|
GoTo ShellCodeError
|
|
EndIf
|
|
Set RegistryErrorIndex = $($R0)
|
|
IfStr(i) $(RegistryErrorIndex) != NO_ERROR
|
|
Debug-Output $(InfName)": Registry error: Add value list"
|
|
GoTo FatalRegistry
|
|
EndIf
|
|
CloseRegKey $(TapiDeviceKey)
|
|
CloseRegKey $(BaseKey)
|
|
;
|
|
; if RAS is not installed, then shell ras setup INF file to install RAS
|
|
; else invoke RAS to allow user to configure RAS for Switch56.
|
|
;
|
|
Read-Syms InvokeRasDlg$(!STF_LANGUAGE)
|
|
Shell "oemnsvra.inf" CheckRasInstalled
|
|
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
|
|
Debug-Output $(InfName)": Error Shelling the RAS INF file oemnsvra.inf"
|
|
Shell "subroutn.inf" SetupMessage, $(!STF_LANGUAGE), +
|
|
"STATUS", $(InvokeRasError)
|
|
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
|
|
GoTo ShellCodeError
|
|
EndIf
|
|
GoTo SuccessfulOption
|
|
EndIf
|
|
Set RasInstalled = $($R0)
|
|
Debug-Output $(InfName)": Is RAS Installed? "$(RasInstalled)
|
|
;
|
|
; display a message to the user that RAS setup will now be invoked
|
|
;
|
|
IfStr(i) $(RasInstalled) == FALSE
|
|
Shell "subroutn.inf" SetupMessage, $(!STF_LANGUAGE), "STATUS", +
|
|
$(InvokeRasSetupMsg)
|
|
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
|
|
GoTo SuccessfulOption
|
|
EndIf
|
|
Else
|
|
Shell "subroutn.inf" SetupMessage, $(!STF_LANGUAGE), "STATUS", +
|
|
$(InvokeRasConfigMsg)
|
|
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
|
|
GoTo SuccessfulOption
|
|
EndIf
|
|
EndIf
|
|
;
|
|
; If this is a reconfiguration, skip the automatic call to RAS setup.
|
|
;
|
|
IfInt $(OldVersionExisted) == $(TRUE)
|
|
IfStr(i) $(!NTN_InstallMode) == configure
|
|
GoTo SuccessfulOption
|
|
EndIf
|
|
EndIf
|
|
;
|
|
; Set the flags based on whether this is an IDW installation
|
|
;
|
|
IfStr(i) $(!STF_IDW) == TRUE
|
|
Set AddCopy = NO
|
|
Set DoCopy = NO
|
|
Set DoConfig = NO
|
|
Else
|
|
Set AddCopy = YES
|
|
Set DoCopy = YES
|
|
Set DoConfig = YES
|
|
EndIf
|
|
;
|
|
; change the global install mode flag to configure if RAS is already installed
|
|
;
|
|
Set SaveNTN_InstallMode = $(!NTN_InstallMode)
|
|
IfStr(i) $(RasInstalled) == TRUE
|
|
Set !NTN_InstallMode = configure
|
|
Else
|
|
Set !NTN_InstallMode = install
|
|
EndIf
|
|
;
|
|
; Override the default drive\directory selection so user can choose..
|
|
;
|
|
Set SaveSTF_SRCDIR_OVERRIDE = $(!STF_SRCDIR_OVERRIDE)
|
|
Set !STF_SRCDIR_OVERRIDE = ""
|
|
Set RasDir = "A:\"$(!STF_PLATFORM)
|
|
;
|
|
; now invoke RAS setup to do the right thing
|
|
;
|
|
Debug-Output $(InfName)": Shelling to RAS:"
|
|
Shell "oemnsvra.inf" InstallOption $(!STF_LANGUAGE) "RAS" $(RasDir) $(AddCopy) $(DoCopy) $(DoConfig)
|
|
Debug-Output $(InfName)": Back from RAS: ShellCode="$($ShellCode)
|
|
;
|
|
; Restore the global install flags.
|
|
;
|
|
Set !NTN_InstallMode = $(SaveNTN_InstallMode)
|
|
Set !STF_SRCDIR_OVERRIDE = $(SaveSTF_SRCDIR_OVERRIDE)
|
|
;
|
|
; Check for RAS errors.
|
|
;
|
|
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
|
|
Debug-Output $(InfName)": Error Shelling the RAS INF file oemnsvra.inf"
|
|
Shell "subroutn.inf" SetupMessage, $(!STF_LANGUAGE), "STATUS", +
|
|
$(InvokeRasError)
|
|
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
|
|
Debug-Output $(InfName)": Cannot run SetupMessage: ShellCode="$($ShellCode)
|
|
GoTo ShellCodeError
|
|
EndIf
|
|
GoTo SuccessfulOption
|
|
EndIf
|
|
;
|
|
; If RAS reports no change, warn the user that the driver may not
|
|
; be configured properly.
|
|
;
|
|
IfStr(i) $($R0) == STATUS_NO_EFFECT
|
|
Shell "subroutn.inf" SetupMessage, $(!STF_LANGUAGE), "STATUS", +
|
|
$(InvokeRasAgainMsg)
|
|
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
|
|
GoTo SuccessfulOption
|
|
EndIf
|
|
EndIf
|
|
|
|
Set CommonStatus = $($R0)
|
|
|
|
GoTo SuccessfulOption
|
|
|
|
;***********************************************************************
|
|
;
|
|
;***********************************************************************
|
|
BindingAdapter =+
|
|
Set Error = "Binding: Sorry, not yet implemented."
|
|
GoTo FatalError
|
|
|
|
;***********************************************************************
|
|
;
|
|
;***********************************************************************
|
|
RemoveAdapter = +
|
|
IfStr(i) $(ProductKeyName) == $(!NTN_RegBase)
|
|
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
|
|
$(ProductSoftwareName)
|
|
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
|
|
Debug-Output $(InfName)": ShellCode error"
|
|
GoTo ShellCodeError
|
|
EndIf
|
|
Set RegistryErrorIndex = $($R0)
|
|
IfStr(i) $(RegistryErrorIndex) != NO_ERROR
|
|
GoTo FatalRegistry
|
|
EndIf
|
|
Else
|
|
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
|
|
$(ProductSoftwareName), $(!NTN_RegBase)
|
|
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
|
|
Debug-Output $(InfName)": ShellCode error"
|
|
GoTo ShellCodeError
|
|
EndIf
|
|
Set RegistryErrorIndex = $($R0)
|
|
IfStr(i) $(RegistryErrorIndex) != NO_ERROR
|
|
GoTo FatalRegistry
|
|
EndIf
|
|
EndIf
|
|
GoTo end
|
|
|
|
;***********************************************************************
|
|
;
|
|
;***********************************************************************
|
|
UpgradeSoftware = +
|
|
IfStr(i) $(ProductKeyName) == $(!NTN_RegBase)
|
|
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
|
|
IfStr $(KeyProduct) != $(KeyNull)
|
|
GetRegValue $(KeyProduct),"MajorVersion", VersionInfo
|
|
Set Version = *($(VersionInfo), 4)
|
|
Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
|
|
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
|
|
Debug-Output $(InfName)": ShellCode error"
|
|
GoTo ShellCodeError
|
|
EndIf
|
|
Set !UG_Filename = $($R0)
|
|
IfStr(i) $(!UG_Filename) != ""
|
|
install "Install-Update"
|
|
IfStr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
|
|
GoTo FatalError
|
|
EndIf
|
|
EndIf
|
|
SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
|
|
SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
|
|
IfInt $(Version) != $(ProductVersion)
|
|
EndIf
|
|
CloseRegKey $(KeyProduct)
|
|
Else
|
|
GoTo FatalRegistry
|
|
EndIf
|
|
Else
|
|
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) +
|
|
$(MAXIMUM_ALLOWED) NetworkCardKey
|
|
IfStr(i) $(NetworkCardKey) != $(KeyNull)
|
|
GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo
|
|
Set ServiceName = *($(ServiceNameInfo), 4)
|
|
OpenRegKey $(NetworkCardKey) "" "NetRules" +
|
|
$(MAXIMUM_ALLOWED) NetRuleKey
|
|
IfStr(i) $(NetRuleKey) != $(KeyNull)
|
|
Else
|
|
GoTo FatalRegistry
|
|
EndIf
|
|
CloseRegKey $(NetRules)
|
|
CloseRegKey $(NetworkCardKey)
|
|
Else
|
|
GoTo FatalRegistry
|
|
EndIf
|
|
OpenRegKey $(!REG_H_LOCAL) "" +
|
|
$(!NTN_ServiceBase)"\"$(ServiceName) +
|
|
$(MAXIMUM_ALLOWED) ServiceKey
|
|
IfStr(i) $(ServiceKey) != $(KeyNull)
|
|
CloseRegKey $(ServiceKey)
|
|
Else
|
|
GoTo FatalRegistry
|
|
EndIf
|
|
EndIf
|
|
GoTo end
|
|
|
|
;***********************************************************************
|
|
;
|
|
;***********************************************************************
|
|
SuccessfulOption = +
|
|
GoTo end
|
|
|
|
;***********************************************************************
|
|
;
|
|
;***********************************************************************
|
|
Abandon = +
|
|
ForListDo $(OEM_ABANDON_OPTIONS)
|
|
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
|
|
$(ProductSoftwareName), $($)
|
|
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
|
|
Debug-Output $(InfName)": ShellCode error"
|
|
GoTo ShellCodeError
|
|
EndIf
|
|
Set RegistryErrorIndex = $($R0)
|
|
IfStr(i) $(RegistryErrorIndex) != NO_ERROR
|
|
GoTo FatalRegistry
|
|
EndIf
|
|
EndForListDo
|
|
IfStr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
|
|
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
|
|
$(ProductSoftwareName), FALSE
|
|
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
|
|
Debug-Output $(InfName)": ShellCode error"
|
|
GoTo ShellCodeError
|
|
EndIf
|
|
Set RegistryErrorIndex = $($R0)
|
|
IfStr(i) $(RegistryErrorIndex) != NO_ERROR
|
|
GoTo FatalRegistry
|
|
EndIf
|
|
EndIf
|
|
GoTo end
|
|
|
|
;***********************************************************************
|
|
;
|
|
;***********************************************************************
|
|
WarningMsg = +
|
|
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
|
|
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
|
|
GoTo ShellCodeError
|
|
EndIf
|
|
IfStr(i) $($R1) == "OK"
|
|
GoTo $(to)
|
|
Else-IfStr(i) $($R1) == "CANCEL"
|
|
GoTo $(from)
|
|
EndIf
|
|
GoTo end
|
|
|
|
;***********************************************************************
|
|
;
|
|
;***********************************************************************
|
|
NonFatalInfo = +
|
|
Set Severity = STATUS
|
|
Set CommonStatus = STATUS_USERCANCEL
|
|
IfStr(i) $(Error) == ""
|
|
Set Severity = NONFATAL
|
|
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
|
|
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
|
|
GoTo ShellCodeError
|
|
EndIf
|
|
Set Error = $($R0)
|
|
EndIf
|
|
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
|
|
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
|
|
GoTo ShellCodeError
|
|
EndIf
|
|
IfStr(i) $($R1) == "OK"
|
|
GoTo $(from)
|
|
EndIf
|
|
GoTo end
|
|
|
|
;***********************************************************************
|
|
;
|
|
;***********************************************************************
|
|
FatalRegistry = +
|
|
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
|
|
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
|
|
GoTo ShellCodeError
|
|
EndIf
|
|
Set Error = $($R0)
|
|
GoTo FatalError
|
|
|
|
;***********************************************************************
|
|
;
|
|
;***********************************************************************
|
|
FatalDetect = +
|
|
Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
|
|
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
|
|
Debug-Output $(InfName)": ShellCode error: cannot get an error string."
|
|
GoTo ShellCodeError
|
|
EndIf
|
|
Set Error = $($R0)
|
|
GoTo FatalError
|
|
|
|
;***********************************************************************
|
|
;
|
|
;***********************************************************************
|
|
FatalError = +
|
|
IfStr(i) $(Error) == ""
|
|
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
|
|
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
|
|
GoTo ShellCodeError
|
|
EndIf
|
|
Set Error = $($R0)
|
|
EndIf
|
|
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
|
|
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
|
|
GoTo ShellCodeError
|
|
EndIf
|
|
GoTo SetFailed
|
|
|
|
;***********************************************************************
|
|
;
|
|
;***********************************************************************
|
|
ShellCodeError = +
|
|
Set DlgType = "MessageBox"
|
|
Set STF_MB_TITLE = $(ShellCodeErrorTitle)
|
|
Set STF_MB_TEXT = $(ShellCodeErrorText)
|
|
Set STF_MB_TYPE = 1
|
|
Set STF_MB_ICON = 3
|
|
Set STF_MB_DEF = 1
|
|
UI Start "Error Message"
|
|
GoTo SetFailed
|
|
|
|
;***********************************************************************
|
|
;
|
|
;***********************************************************************
|
|
SetFailed = +
|
|
Set CommonStatus = STATUS_FAILED
|
|
IfStr(i) $(OEM_ABANDON_ON) == TRUE
|
|
Set OEM_ABANDON_ON = FALSE
|
|
GoTo Abandon
|
|
EndIf
|
|
GoTo end
|
|
|
|
;***********************************************************************
|
|
;
|
|
;***********************************************************************
|
|
end = +
|
|
Set !DebugOutputControl = $(OldDebugControl)
|
|
Return $(CommonStatus)
|
|
|
|
;***********************************************************************
|
|
;
|
|
;***********************************************************************
|
|
[HtCreateRegKey]
|
|
Debug-Output $(InfName)": Entering [HtCreateRegKey]"
|
|
Set ECR_Result = NO_ERROR
|
|
Set ECR_BaseKeyHandle = $($0)
|
|
Set ECR_NewPath = $($1)
|
|
Set KeyNull = ""
|
|
Set MAXIMUM_ALLOWED = 33554432
|
|
|
|
Debug-Output $(InfName)": HtCreateRegKey - ECR_BaseKeyHandle = "$(ECR_BaseKeyHandle)
|
|
Debug-Output $(InfName)": ECR_NewPath = "$(ECR_NewPath)
|
|
Debug-Output $(InfName)": MAXIMUM_ALLOWED = "$(MAXIMUM_ALLOWED)
|
|
Debug-Output $(InfName)": KeyNull = "$(KeyNull)
|
|
|
|
OpenRegKey $(ECR_BaseKeyHandle) "" $(ECR_NewPath) $(MAXIMUM_ALLOWED) +
|
|
ECR_BaseKey
|
|
Debug-Output $(InfName)": ECR_BaseKey = "$(ECR_BaseKey)
|
|
Debug-Output $(InfName)": OpenRegKey returned "$($R0)
|
|
IfStr $(ECR_BaseKey) == $(KeyNull)
|
|
Debug-Output $(InfName)": ECR_BaseKey == KeyNull"
|
|
Else
|
|
Debug-Output $(InfName)": ECR_BaseKey != KeyNull"
|
|
Set ECR_KeyHandle = $(ECR_BaseKey)
|
|
GoTo ECR_Return
|
|
EndIf
|
|
|
|
Set ECR_TmpPath = ""
|
|
Split-String $(ECR_NewPath) "\" ECR_PList
|
|
Debug-Output $(InfName)": ECR_PList = "$(ECR_PList)
|
|
ForListDo $(ECR_PList)
|
|
IfStr(i) $($) != "\"
|
|
IfInt $(#) == 1
|
|
Set ECR_TmpPath = $($)
|
|
Else
|
|
Set ECR_TmpPath = $(ECR_TmpPath)"\"$($)
|
|
EndIf
|
|
Debug-Output $(InfName)": Determining if "$(ECR_TmpPath)" exists"
|
|
OpenRegKey $(ECR_BaseKeyHandle) "" $(ECR_TmpPath) $(MAXIMUM_ALLOWED) ECR_BaseKey
|
|
IfStr $(ECR_BaseKey) == $(KeyNull)
|
|
Debug-Output $(InfName)": Creating "$(ECR_TmpPath)
|
|
CreateRegKey $(ECR_BaseKeyHandle) {$(ECR_TmpPath),0,GenericClass} "" $(MAXIMUM_ALLOWED) "" ECR_KeyHandle
|
|
IfStr(i) $(ECR_KeyHandle) == $(KeyNull)
|
|
Set ECR_Result = $($R0)
|
|
GoTo ECR_Return
|
|
EndIf
|
|
EndIf
|
|
EndIf
|
|
EndForListDo
|
|
ECR_Return = +
|
|
Return $(ECR_Result) $(ECR_KeyHandle)
|
|
|
|
;***********************************************************************
|
|
;
|
|
;***********************************************************************
|
|
[DebugConfiguration]
|
|
Debug-Output $(!p:InfName)": **CONFIGURATION STATE: "$($0)
|
|
Debug-Output $(!p:InfName)": InterruptNumber is "$(!p:InterruptNumber)
|
|
Debug-Output $(!p:InfName)": RamBaseAddress is "$(!p:RamBaseAddress)
|
|
Debug-Output $(!p:InfName)": LineType is "$(!p:LineType)
|
|
Debug-Output $(!p:InfName)": LineRate is "$(!p:LineRate)
|
|
Return
|
|
|
|
;***********************************************************************
|
|
;
|
|
;***********************************************************************
|
|
[Install-Option]
|
|
Set STF_VITAL = ""
|
|
IfStr(i) $(AddCopy) == "YES"
|
|
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
|
|
EndIf
|
|
IfStr(i) $(DoCopy) == "YES"
|
|
Set !STF_NCPA_FLUSH_COPYLIST = TRUE
|
|
CopyFilesInCopyList
|
|
EndIf
|
|
Exit
|
|
|
|
;***********************************************************************
|
|
;
|
|
;***********************************************************************
|
|
[Install-Update]
|
|
Set STF_VITAL = ""
|
|
Set STF_OVERWRITE = "VERIFYSOURCEOLDER"
|
|
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
|
|
AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
|
|
Set !STF_NCPA_FLUSH_COPYLIST = TRUE
|
|
CopyFilesInCopyList
|
|
Exit
|
|
|
|
;***********************************************************************
|
|
;
|
|
;***********************************************************************
|
|
[Source Media Descriptions]
|
|
1 = "Windows NT Setup Disk #1" , TAGFILE = HTDSU41.SYS
|
|
|
|
;***********************************************************************
|
|
;
|
|
;***********************************************************************
|
|
[ProductType]
|
|
STF_PRODUCT = Winnt
|
|
STF_PLATFORM = I386
|
|
|
|
;***********************************************************************
|
|
;
|
|
;***********************************************************************
|
|
[Files-Inf]
|
|
1, oemsetup.inf, SIZE=1000, RENAME=$(!UG_Filename)
|
|
|
|
;***********************************************************************
|
|
;
|
|
;***********************************************************************
|
|
[Files-HTDSU41]
|
|
1, HTDSU41.SYS, SIZE=65536
|
|
|
|
;***********************************************************************
|
|
;
|
|
;***********************************************************************
|
|
[LanguagesSupported]
|
|
ENG
|
|
|
|
;***********************************************************************
|
|
;
|
|
;***********************************************************************
|
|
[OptionsTextENG]
|
|
HTDSU41 = "HT Communications DSU41"
|
|
; HTDSU42 = "HT Communications DSU42"
|
|
|
|
;***********************************************************************
|
|
;
|
|
;***********************************************************************
|
|
[FileConstantsENG]
|
|
ProCaption = "Windows NT Setup"
|
|
ProCancel = "Cancel"
|
|
ProCancelMsg = "Windows NT Networking is not correctly installed. "+
|
|
"Are you sure you want to cancel copying files?"
|
|
ProCancelCap = "Network Setup Message"
|
|
ProText1 = "Copying:"
|
|
ProText2 = "To:"
|
|
|
|
FunctionTitleHTDSU41 = "HT Communications DSU41 Card Setup"
|
|
ProductSoftwareDescription = "HT Communications DSU41 Driver"
|
|
ProductHardwareHTDSU41Description = "HT Communications DSU41"
|
|
ProductSoftwareTitle = "HT Communications DSU41 Driver"
|
|
ProductHardwareHTDSU41Title = "HT Communications DSU41 Adapter"
|
|
|
|
ShellCodeErrorTitle = "Error: "$(FunctionTitle)$(Option))
|
|
ShellCodeErrorText = "Shell Code Error."
|
|
|
|
;***********************************************************************
|
|
;
|
|
;***********************************************************************
|
|
[DialogConstantsENG]
|
|
Help = "&Help"
|
|
Exit = "Cancel"
|
|
OK = "OK"
|
|
HelpContext = ""
|
|
Continue = "Continue"
|
|
Cancel = "Cancel"
|
|
|
|
;***********************************************************************
|
|
;
|
|
;***********************************************************************
|
|
[FileDependentDlgENG]
|
|
DlgType = "MultiCombo"
|
|
DlgTemplate = "WD"
|
|
Caption = $(FunctionTitle)$(Option)
|
|
|
|
Combo1Label = "&IRQ Level:"
|
|
Combo1List = $(IRQ_List)
|
|
Combo1Out = $(InterruptNumber)
|
|
|
|
Combo2Label = "&RAM Base Address:"
|
|
Combo2List = $(RAM_Hex_List)
|
|
Combo2Out = $(RAM_Hex_Value)
|
|
|
|
Combo3Label = "&Transmit Rate:"
|
|
Combo3List = $(Rate_Strings)
|
|
Combo3Out = $(RateString)
|
|
|
|
ComboListItemsIn = {Combo1List, Combo2List, Combo3List}
|
|
ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out}
|
|
EditTextIn = ""
|
|
EditTextLim = ""
|
|
CBOptionsGreyed = {}
|
|
NotifyFields = {NO, NO, NO}
|
|
; HelpContext = $(!IDH_DB_OEMNAD1_INS)
|
|
|
|
;***********************************************************************
|
|
;
|
|
;***********************************************************************
|
|
[InvokeRasDlgENG]
|
|
InvokeRasSetupMsg = "HT Communications DSU41 setup is complete. "+
|
|
"Remote Access Services (RAS) must now be installed. "+
|
|
"Please configure the HTDSU41Sw56 ports in RAS "+
|
|
"setup to enable you to use RAS over the HTDSU41."
|
|
InvokeRasConfigMsg = "HT Communications DSU41 setup is complete. "+
|
|
"Remote Access Services (RAS) setup must now be invoked. "+
|
|
"Please configure the HTDSU41Sw56 ports in RAS "+
|
|
"setup to enable you to use RAS over the HTDSU41."
|
|
InvokeRasAgainMsg = "HT Communications DSU41 setup is NOT complete! "+
|
|
"Remote Access Services (RAS) is not configured to use a "+
|
|
"HTDSU41Sw56 port. You must configure at least one HTDSU41Sw56 "+
|
|
"port in RAS setup now, or you will have reconfigure the adapter "+
|
|
"before running RAS configuration again later."
|
|
InvokeRasError = "HT Communications DSU41 setup encountered an error "+
|
|
"while invoking the RAS setup INF file (OEMNSVRA.INF). "+
|
|
"Please make sure that the file is present in the "+
|
|
"System32 directory and is the proper file."
|
|
|