781 lines
25 KiB
ArmAsm
781 lines
25 KiB
ArmAsm
//#pragma comment(exestr, "$Header: /usr4/winnt/SOURCES/halpcims/src/hal/halsnipm/mips/RCS/duocache.s,v 1.4 1996/02/23 17:55:12 pierre Exp $")
|
||
// TITLE("Cache Flush")
|
||
//++
|
||
//
|
||
// Copyright (c) 1991-1993 Microsoft Corporation
|
||
//
|
||
// Module Name:
|
||
//
|
||
// duocache.s
|
||
//
|
||
// Abstract:
|
||
//
|
||
// This module implements the code necessary for cache operations on
|
||
// MIPS R4000 MultiProcerssor Machines. It is very special to SNI machines,
|
||
// which use a special MP Agent Asic.
|
||
//`
|
||
// Environment:
|
||
//
|
||
// Kernel mode only.
|
||
//
|
||
//--
|
||
|
||
#include "halmips.h"
|
||
#include "SNIdef.h"
|
||
|
||
// NON COHERENT algorithm : to use the replace facility of the MP_Agent
|
||
|
||
#define CONFIG_NONCOH(reg) \
|
||
.set noreorder; \
|
||
.set noat; \
|
||
mfc0 reg,config; \
|
||
nop; \
|
||
nop; \
|
||
and AT,reg,~(7); \
|
||
or AT,AT,0x3; \
|
||
mtc0 AT,config; \
|
||
nop; \
|
||
nop; \
|
||
nop; \
|
||
nop; \
|
||
.set at; \
|
||
.set reorder
|
||
|
||
// restauration of CONFIG register
|
||
|
||
#define CONFIG_RESTORE(reg) \
|
||
.set noreorder; \
|
||
mtc0 reg,config; \
|
||
nop; \
|
||
nop; \
|
||
nop; \
|
||
nop; \
|
||
.set reorder
|
||
|
||
// beql : if the cond branch is not taken, the inst in the delay-slot is nullified
|
||
|
||
#define LOAD_RPL_ADDR(reg,reg1) \
|
||
lw reg,HalpMpaCacheReplace; \
|
||
2:
|
||
|
||
|
||
|
||
//
|
||
// Define cache operations constants.
|
||
//
|
||
|
||
#define COLOR_BITS (7 << PAGE_SHIFT) // color bit (R4000 - 8kb cache)
|
||
#define COLOR_MASK (0x7fff) // color mask (R4000 - 8kb cache)
|
||
#define FLUSH_BASE 0xfffe0000 // flush base address
|
||
#define PROTECTION_BITS ((1 << ENTRYLO_V) | (1 << ENTRYLO_D) ) //
|
||
|
||
SBTTL("Processor Identification")
|
||
//++
|
||
//
|
||
// VOID
|
||
// HalpProcIdentify()
|
||
//
|
||
// Routine Description:
|
||
//
|
||
// This function reads the implementation number in the prid register.
|
||
//
|
||
// Arguments:
|
||
//
|
||
// None
|
||
//
|
||
// Return Value:
|
||
//
|
||
// None.
|
||
//
|
||
//--
|
||
|
||
LEAF_ENTRY(HalpProcIdentify)
|
||
|
||
.set noreorder
|
||
.set noat
|
||
mfc0 v0,prid
|
||
nop
|
||
srl v0,PRID_IMP
|
||
and v0,0xff
|
||
j ra
|
||
nop
|
||
|
||
.end HalpProcIdentify
|
||
|
||
SBTTL("Flush Data Cache Page")
|
||
//++
|
||
//
|
||
// VOID
|
||
// HalpFlushDcachePageMulti (
|
||
// IN PVOID Color,
|
||
// IN ULONG PageFrame,
|
||
// IN ULONG Length
|
||
// )
|
||
//
|
||
// Routine Description:
|
||
//
|
||
// This function flushes (hit/writeback/invalidate) up to a page of data
|
||
// from the data cache.
|
||
//
|
||
// Arguments:
|
||
//
|
||
// Color (a0) - Supplies the starting virtual address and color of the
|
||
// data that is flushed.
|
||
//
|
||
// PageFrame (a1) - Supplies the page frame number of the page that
|
||
// is flushed.
|
||
//
|
||
// Length (a2) - Supplies the length of the region in the page that is
|
||
// flushed.
|
||
//
|
||
// Return Value:
|
||
//
|
||
// None.
|
||
//
|
||
//--
|
||
|
||
LEAF_ENTRY(HalpFlushDcachePageMulti)
|
||
|
||
#if DBG
|
||
|
||
lw t0,KeDcacheFlushCount // get address of dcache flush count
|
||
lw t1,0(t0) // increment the count of flushes
|
||
addu t1,t1,1 //
|
||
sw t1,0(t0) // store result
|
||
#endif
|
||
|
||
15: DISABLE_INTERRUPTS(t5) // disable interrupts
|
||
|
||
.set noreorder
|
||
.set noat
|
||
|
||
//
|
||
// Flush the primary and secondary data caches.
|
||
//
|
||
|
||
//
|
||
// HIT_WRITEBACK_INVALIDATE cache instruction does not update the SC
|
||
// TagRam copy in the MP Agent. So we do cache replace.
|
||
//
|
||
|
||
.set noreorder
|
||
.set noat
|
||
40: and a0,a0,PAGE_SIZE -1 // PageOffset
|
||
sll t7,a1,PAGE_SHIFT // physical address
|
||
lw t4,KiPcr + PcSecondLevelDcacheFillSize(zero) // get 2nd fill size
|
||
or t0,t7,a0 // physical address + offset
|
||
subu t6,t4,1 // compute block size minus one
|
||
and t7,t0,t6 // compute offset in block
|
||
addu a2,a2,t6 // round up to next block
|
||
addu a2,a2,t7 //
|
||
nor t6,t6,zero // complement block size minus one
|
||
and a2,a2,t6 // truncate length to even number
|
||
beq zero,a2,60f // if eq, no blocks to flush
|
||
and t8,t0,t6 // compute starting virtual address
|
||
addu t9,t8,a2 // compute ending virtual address
|
||
subu t9,t9,t4 // compute ending loop address
|
||
|
||
LOAD_RPL_ADDR(a3,a2) // get base flush address
|
||
lw t0,KiPcr + PcSecondLevelDcacheSize(zero) // get cache size
|
||
add t0,t0,-1 // mask of the cache size
|
||
CONFIG_NONCOH(t2) // NON COHERENT algorithm
|
||
.set noreorder
|
||
.set noat
|
||
|
||
50: and t7,t8,t0 // offset
|
||
addu t7,t7,a3 // physical address + offset
|
||
lw zero,0(t7) // load Cache -> Write back old Data
|
||
bne t8,t9,50b // if ne, more blocks to invalidate
|
||
addu t8,t8,t4 // compute next block address (+Linesize)
|
||
|
||
CONFIG_RESTORE(t2)
|
||
|
||
60: ENABLE_INTERRUPTS(t5) // enable interrupts
|
||
|
||
j ra // return
|
||
|
||
.end HalpFlushDcachePageMulti
|
||
|
||
|
||
SBTTL("Purge Instruction Cache Page")
|
||
//++
|
||
//
|
||
// VOID
|
||
// HalpPurgeIcachePageMulti (
|
||
// IN PVOID Color,
|
||
// IN ULONG PageFrame,
|
||
// IN ULONG Length
|
||
// )
|
||
//
|
||
// Routine Description:
|
||
//
|
||
// This function purges (hit/invalidate) up to a page of data from the
|
||
// instruction cache.
|
||
//
|
||
// Arguments:
|
||
//
|
||
// Color (a0) - Supplies the starting virtual address and color of the
|
||
// data that is purged.
|
||
//
|
||
// PageFrame (a1) - Supplies the page frame number of the page that
|
||
// is purged.
|
||
//
|
||
// Length (a2) - Supplies the length of the region in the page that is
|
||
// purged.
|
||
//
|
||
// Return Value:
|
||
//
|
||
// None.
|
||
//
|
||
//--
|
||
|
||
LEAF_ENTRY(HalpPurgeIcachePageMulti)
|
||
|
||
#if DBG
|
||
|
||
lw t0,KeIcacheFlushCount // get address of icache flush count
|
||
lw t1,0(t0) // increment the count of flushes
|
||
addu t1,t1,1 //
|
||
sw t1,0(t0) // store result
|
||
|
||
#endif
|
||
|
||
.set noreorder
|
||
.set noat
|
||
lw v0,KiPcr + PcAlignedCachePolicy(zero) // get cache policy
|
||
and a0,a0,COLOR_MASK // isolate color bits
|
||
li t0,FLUSH_BASE // get base flush address
|
||
or t0,t0,a0 // compute color virtual address
|
||
sll t1,a1,ENTRYLO_PFN // shift page frame into position
|
||
or t1,t1,PROTECTION_BITS // merge protection bits
|
||
or t1,t1,v0 // merge cache policy
|
||
and a0,a0,0x1000 // isolate TB entry index
|
||
beql zero,a0,10f // if eq, first entry
|
||
move t2,zero // set second page table entry
|
||
move t2,t1 // set second page table entry
|
||
move t1,zero // set first page table entry
|
||
10: mfc0 t3,wired // get TB entry index
|
||
lw t4,KiPcr + PcSecondLevelIcacheFillSize(zero) // get 2nd fill size
|
||
.set at
|
||
.set reorder
|
||
|
||
//
|
||
// Purge data from the instruction cache.
|
||
//
|
||
|
||
15: DISABLE_INTERRUPTS(t5) // disable interrupts
|
||
|
||
.set noreorder
|
||
.set noat
|
||
mfc0 t6,entryhi // get current PID and VPN2
|
||
srl t7,t0,ENTRYHI_VPN2 // isolate VPN2 of virtual address
|
||
sll t7,t7,ENTRYHI_VPN2 //
|
||
and t6,t6,0xff << ENTRYHI_PID // isolate current PID
|
||
or t7,t7,t6 // merge PID with VPN2 of virtual address
|
||
mtc0 t7,entryhi // set VPN2 and PID for probe
|
||
mtc0 t1,entrylo0 // set first PTE value
|
||
mtc0 t2,entrylo1 // set second PTE value
|
||
mtc0 t3,index // set TB index value
|
||
nop // fill
|
||
tlbwi // write TB entry - 3 cycle hazzard
|
||
subu t6,t4,1 // compute block size minus one
|
||
and t7,t0,t6 // compute offset in block
|
||
addu a2,a2,t6 // round up to next block
|
||
addu a2,a2,t7 //
|
||
nor t6,t6,zero // complement block size minus one
|
||
and a2,a2,t6 // truncate length to even number
|
||
beq zero,a2,60f // if eq, no blocks to purge
|
||
and t8,t0,t6 // compute starting virtual address
|
||
addu t9,t8,a2 // compute ending virtual address
|
||
subu t9,t9,t4 // compute ending loop address
|
||
|
||
//
|
||
// Purge the primary and secondary instruction caches.
|
||
//
|
||
.set noreorder
|
||
.set noat
|
||
|
||
40: move t7,t8
|
||
|
||
//
|
||
// HIT_WRITEBACK_INVALIDATE cache instruction does not work. So we do cache replace.
|
||
// We use a MP agent facility to do that : a 4Mb area is stolen to the upper EISA space
|
||
// and this address is notified to the MP agent. When the cache replace is done, no
|
||
// access to the memory is done : the MP agent returns zero as value for these addresses.
|
||
// Be careful : to use this mechanism, CONFIG register must be programmed in NON COHERENT
|
||
// mode, so we must be protected from interrupts.
|
||
//
|
||
|
||
li t8,PAGE_SIZE
|
||
add t8,t8,-1 // page mask
|
||
and t8,t7,t8 // offset in the page
|
||
sll t7,a1,PAGE_SHIFT // physical address
|
||
or t8,t7,t8 // physical address + offset
|
||
|
||
//
|
||
// note: we have a Unified SLC, so SecondLevelIcacheSize is set to 0
|
||
//
|
||
|
||
lw t0,KiPcr + PcSecondLevelIcacheSize(zero) // get cache size
|
||
|
||
addu t9,t8,a2 // compute ending physical address
|
||
subu t9,t9,t4 // compute ending loop address
|
||
|
||
add t0,t0,-1 // mask of the cache size
|
||
and t8,t8,t0 // first cache line to invalidate
|
||
and t9,t9,t0 // last cache line to invalidate
|
||
|
||
LOAD_RPL_ADDR(a2,a3)
|
||
|
||
or t8,a2,t8 // starting address
|
||
or t9,a2,t9 // ending address
|
||
CONFIG_NONCOH(t2) // NON COHERENT algorithm
|
||
.set noreorder
|
||
.set noat
|
||
|
||
50: lw zero,0(t8) // invalidate sc
|
||
bne t8,t9,50b // if ne, more blocks to invalidate
|
||
addu t8,t8,t4 // compute next block address
|
||
|
||
CONFIG_RESTORE(t2)
|
||
|
||
60: ENABLE_INTERRUPTS(t5) // enable interrupts
|
||
|
||
j ra // return
|
||
|
||
.end HalPurgeIcachePage
|
||
|
||
|
||
SBTTL("Sweep Data Cache")
|
||
//++
|
||
//
|
||
// VOID
|
||
// HalpSweepDcacheMulti (
|
||
// VOID
|
||
// )
|
||
//
|
||
// Routine Description:
|
||
//
|
||
// This function sweeps (index/writeback/invalidate) the entire data cache.
|
||
//
|
||
// Arguments:
|
||
//
|
||
// None.
|
||
//
|
||
// Return Value:
|
||
//
|
||
// None.
|
||
//
|
||
//--
|
||
|
||
LEAF_ENTRY(HalpSweepDcacheMulti)
|
||
|
||
#if DBG
|
||
|
||
lw t0,KeDcacheFlushCount // get address of dcache flush count
|
||
lw t1,0(t0) // increment the count of flushes
|
||
addu t1,t1,1 //
|
||
sw t1,0(t0) // store result
|
||
#endif
|
||
|
||
.set at
|
||
.set reorder
|
||
|
||
DISABLE_INTERRUPTS(t3) // disable interrupts
|
||
|
||
.set noreorder
|
||
.set noat
|
||
|
||
//
|
||
// sweep secondary cache in the MP Agent
|
||
//
|
||
|
||
//
|
||
// HIT_WRITEBACK_INVALIDATE cache instruction does not update the SC
|
||
// TagRam copy in the MP Agent. So we do cache replace.
|
||
//
|
||
|
||
lw t0,KiPcr + PcSecondLevelDcacheSize(zero) // get data cache size
|
||
lw t1,KiPcr + PcSecondLevelDcacheFillSize(zero) // get block size
|
||
|
||
LOAD_RPL_ADDR(a0,t5) // starting address
|
||
addu a1,a0,t0 // compute ending cache address
|
||
subu a1,a1,t1 // compute ending block address
|
||
|
||
CONFIG_NONCOH(t2) // NON COHERENT algorithm
|
||
|
||
.set noreorder
|
||
.set noat
|
||
|
||
25:
|
||
lw zero,0(a0)
|
||
bne a0,a1,25b // if ne, more to invalidate
|
||
addu a0,a0,t1 // compute address of next block
|
||
|
||
CONFIG_RESTORE(t2)
|
||
|
||
ENABLE_INTERRUPTS(t3) // enable interrupts
|
||
|
||
.set at
|
||
.set reorder
|
||
|
||
j ra // return
|
||
|
||
|
||
.end HalpSweepDcacheMulti
|
||
|
||
|
||
SBTTL("Sweep Instruction Cache")
|
||
//++
|
||
//
|
||
// VOID
|
||
// HalpSweepIcacheMulti (
|
||
// VOID
|
||
// )
|
||
//
|
||
// Routine Description:
|
||
//
|
||
// This function sweeps (index/invalidate) the entire instruction cache.
|
||
//
|
||
// Arguments:
|
||
//
|
||
// None.
|
||
//
|
||
// Return Value:
|
||
//
|
||
// None.
|
||
//
|
||
//--
|
||
|
||
LEAF_ENTRY(HalpSweepIcacheMulti)
|
||
|
||
#if DBG
|
||
|
||
lw t0,KeIcacheFlushCount // get address of icache flush count
|
||
lw t1,0(t0) // increment the count of flushes
|
||
addu t1,t1,1 //
|
||
sw t1,0(t0) // store result
|
||
#endif
|
||
//
|
||
// Sweep the secondary instruction cache.
|
||
//
|
||
|
||
.set noreorder
|
||
.set noat
|
||
|
||
DISABLE_INTERRUPTS(t3) // disable interrupts
|
||
.set noreorder
|
||
.set noat
|
||
|
||
//
|
||
// sweep secondary cache
|
||
// SNI machines have only an Unified SL cache
|
||
// NOTE: PcSecondLevelIcacheSize and PcSecondLevelICacheFillSize is set to 0
|
||
// on SNI machines
|
||
//
|
||
|
||
lw t0,KiPcr + PcSecondLevelIcacheSize(zero) // get instruction cache size
|
||
lw t1,KiPcr + PcSecondLevelIcacheFillSize(zero) // get fill size
|
||
LOAD_RPL_ADDR(a0,a3) // set starting index value
|
||
addu a1,a0,t0 // compute ending cache address
|
||
subu a1,a1,t1 // compute ending block address
|
||
|
||
CONFIG_NONCOH(t2) // NON COHERENT algorithm
|
||
.set noreorder
|
||
.set noat
|
||
|
||
10: lw zero,0(a0)
|
||
bne a0,a1,10b // if ne, more to invalidate
|
||
addu a0,a0,t1 // compute address of next block
|
||
|
||
CONFIG_RESTORE(t2)
|
||
.set noreorder
|
||
.set noat
|
||
|
||
|
||
20: lw t0,KiPcr + PcFirstLevelIcacheSize(zero) // get instruction cache size
|
||
lw t1,KiPcr + PcFirstLevelIcacheFillSize(zero) // get fill size
|
||
li a0,KSEG0_BASE // set starting index value
|
||
addu a1,a0,t0 // compute ending cache address
|
||
subu a1,a1,t1 // compute ending block address
|
||
|
||
//
|
||
// Sweep the primary instruction cache.
|
||
//
|
||
|
||
30: cache INDEX_INVALIDATE_I,0(a0) // invalidate cache line
|
||
bne a0,a1,30b // if ne, more to invalidate
|
||
addu a0,a0,t1 // compute address of next block
|
||
ENABLE_INTERRUPTS(t3) // enable interrupts
|
||
|
||
.set at
|
||
.set reorder
|
||
j ra // return
|
||
|
||
.end HalSweepIcache
|
||
|
||
|
||
SBTTL("Zero Page")
|
||
//++
|
||
//
|
||
// VOID
|
||
// HalpZeroPageMulti (
|
||
// IN PVOID NewColor,
|
||
// IN PVOID OldColor,
|
||
// IN ULONG PageFrame
|
||
// )
|
||
//
|
||
// Routine Description:
|
||
//
|
||
// This function zeros a page of memory.
|
||
//
|
||
// The algorithm used to zero a page is as follows:
|
||
//
|
||
// 1. Purge (hit/invalidate) the page from the instruction cache
|
||
// using the old color iff the old color is not the same as
|
||
// the new color.
|
||
//
|
||
// 2. Purge (hit/invalidate) the page from the data cache using
|
||
// the old color iff the old color is not the same as the new
|
||
// color.
|
||
//
|
||
// 3. Create (create/dirty/exclusive) the page in the data cache
|
||
// using the new color.
|
||
//
|
||
// 4. Write zeros to the page using the new color.
|
||
//
|
||
// Arguments:
|
||
//
|
||
// NewColor (a0) - Supplies the page aligned virtual address of the
|
||
// new color of the page that is zeroed.
|
||
//
|
||
// OldColor (a1) - Supplies the page aligned virtual address of the
|
||
// old color of the page that is zeroed.
|
||
//
|
||
// PageFrame (a2) - Supplies the page frame number of the page that
|
||
// is zeroed.
|
||
//
|
||
// Return Value:
|
||
//
|
||
// None.
|
||
//
|
||
//--
|
||
|
||
.struct 0
|
||
.space 3 * 4 // fill
|
||
ZpRa: .space 4 // saved return address
|
||
ZpFrameLength: // length of stack frame
|
||
ZpA0: .space 4 // (a0)
|
||
ZpA1: .space 4 // (a1)
|
||
ZpA2: .space 4 // (a2)
|
||
ZpA3: .space 4 // (a3)
|
||
|
||
NESTED_ENTRY(HalpZeroPageMulti, ZpFrameLength, zero)
|
||
|
||
subu sp,sp,ZpFrameLength // allocate stack frame
|
||
sw ra,ZpRa(sp) // save return address
|
||
|
||
PROLOGUE_END
|
||
|
||
and a0,a0,COLOR_BITS // isolate new color bits
|
||
and a1,a1,COLOR_BITS // isolate old color bits
|
||
sw a0,ZpA0(sp) // save new color bits
|
||
sw a1,ZpA1(sp) // save old color bits
|
||
sw a2,ZpA2(sp) // save page frame
|
||
|
||
//
|
||
// If the old page color is not equal to the new page color, then change
|
||
// the color of the page.
|
||
//
|
||
|
||
beq a0,a1,10f // if eq, colors match
|
||
jal KeChangeColorPage // chagne page color
|
||
|
||
//
|
||
// Create dirty exclusive cache blocks and zero the data.
|
||
//
|
||
|
||
10: lw a3,ZpA0(sp) // get new color bits
|
||
lw a1,ZpA2(sp) // get page frame number
|
||
|
||
.set noreorder
|
||
.set noat
|
||
lw v0,KiPcr + PcAlignedCachePolicy(zero) // get cache polciy
|
||
li t0,FLUSH_BASE // get base flush address
|
||
or t0,t0,a3 // compute new color virtual address
|
||
sll t1,a1,ENTRYLO_PFN // shift page frame into position
|
||
or t1,t1,PROTECTION_BITS // merge protection bits
|
||
or t1,t1,v0 // merge cache policy
|
||
and a3,a3,0x1000 // isolate TB entry index
|
||
beql zero,a3,20f // if eq, first entry
|
||
move t2,zero // set second page table entry
|
||
move t2,t1 // set second page table entry
|
||
move t1,zero // set first page table entry
|
||
20: mfc0 t3,wired // get TB entry index
|
||
lw t4,KiPcr + PcFirstLevelDcacheFillSize(zero) // get 1st fill size
|
||
lw v0,KiPcr + PcSecondLevelDcacheFillSize(zero) // get 2nd fill size
|
||
.set at
|
||
.set reorder
|
||
|
||
DISABLE_INTERRUPTS(t5) // disable interrupts
|
||
|
||
.set noreorder
|
||
.set noat
|
||
mfc0 t6,entryhi // get current PID and VPN2
|
||
srl t7,t0,ENTRYHI_VPN2 // isolate VPN2 of virtual address
|
||
sll t7,t7,ENTRYHI_VPN2 //
|
||
and t6,t6,0xff << ENTRYHI_PID // isolate current PID
|
||
or t7,t7,t6 // merge PID with VPN2 of virtual address
|
||
mtc0 t7,entryhi // set VPN2 and PID for probe
|
||
mtc0 t1,entrylo0 // set first PTE value
|
||
mtc0 t2,entrylo1 // set second PTE value
|
||
mtc0 t3,index // set TB index value
|
||
nop // fill
|
||
tlbwi // write TB entry - 3 cycle hazzard
|
||
addu t9,t0,PAGE_SIZE // compute ending address of block
|
||
dmtc1 zero,f0 // set write pattern
|
||
and t8,t4,0x10 // test if 16-byte cache block
|
||
|
||
//
|
||
// Zero page in primary and secondary data caches.
|
||
//
|
||
|
||
50: sdc1 f0,0(t0) // zero 64-byte block
|
||
sdc1 f0,8(t0) //
|
||
sdc1 f0,16(t0) //
|
||
sdc1 f0,24(t0) //
|
||
sdc1 f0,32(t0) //
|
||
sdc1 f0,40(t0) //
|
||
sdc1 f0,48(t0) //
|
||
addu t0,t0,64 // advance to next 64-byte block
|
||
bne t0,t9,50b // if ne, more to zero
|
||
sdc1 f0,-8(t0) //
|
||
|
||
.set at
|
||
.set reorder
|
||
|
||
ENABLE_INTERRUPTS(t5) // enable interrupts
|
||
|
||
lw ra,ZpRa(sp) // get return address
|
||
addu sp,sp,ZpFrameLength // deallocate stack frame
|
||
j ra // return
|
||
|
||
.end HalpZeroPageMulti
|
||
|
||
|
||
SBTTL("Zero Page")
|
||
//++
|
||
//
|
||
// VOID
|
||
// HalpMultiPciEccCorrector (
|
||
// IN PVOID PhysicalAddr,
|
||
// IN PVOID PageFrame,
|
||
// IN ULONG Length
|
||
// )
|
||
//
|
||
// Routine Description:
|
||
//
|
||
// This function corrects an ECC.
|
||
//
|
||
//
|
||
// Arguments:
|
||
//
|
||
// a0 : virtual
|
||
// a1 : pfn
|
||
// a2 : length
|
||
//
|
||
// Return Value:
|
||
//
|
||
// None.
|
||
//
|
||
//--
|
||
|
||
|
||
LEAF_ENTRY(HalpMultiPciEccCorrector)
|
||
|
||
//
|
||
// to avoid Virtual Coherency Exception (unrecoverable with NT)
|
||
// flush of the primary cache. So the physical address won't
|
||
// be twice in the primary cache.
|
||
//
|
||
DISABLE_INTERRUPTS(t5) // disable interrupts
|
||
|
||
.set noreorder
|
||
.set noat
|
||
//
|
||
// first, we make a virtual address to get the corrected address in the cache
|
||
// secondly, we flush it by cache replace mechanism
|
||
//
|
||
|
||
and a0,a0,COLOR_MASK // isolate color and offset bits
|
||
lw v0,KiPcr + PcAlignedCachePolicy(zero) // get cache policy
|
||
li t0,FLUSH_BASE // get base flush address
|
||
or t0,t0,a0 // compute color virtual address
|
||
sll t1,a1,ENTRYLO_PFN // shift page frame into position
|
||
or t1,t1,PROTECTION_BITS // merge protection bits
|
||
or t1,t1,v0 // merge cache policy
|
||
and a0,a0,0x1000 // isolate TB entry index
|
||
beql zero,a0,10f // if eq, first entry
|
||
move t2,zero // set second page table entry
|
||
move t2,t1 // set second page table entry
|
||
move t1,zero // set first page table entry
|
||
10: mfc0 t3,wired // get TB entry index
|
||
lw v0,KiPcr + PcSecondLevelDcacheFillSize(zero) // get 2nd fill size
|
||
lw t4,KiPcr + PcFirstLevelDcacheFillSize(zero) // get 1st fill size
|
||
bnel zero,v0,15f // if ne, second level cache present
|
||
move t4,v0 // set flush block size
|
||
|
||
15: mfc0 t6,entryhi // get current PID and VPN2
|
||
srl t7,t0,ENTRYHI_VPN2 // isolate VPN2 of virtual address
|
||
sll t7,t7,ENTRYHI_VPN2 //
|
||
and t6,t6,0xff << ENTRYHI_PID // isolate current PID
|
||
or t7,t7,t6 // merge PID with VPN2 of virtual address
|
||
mtc0 t7,entryhi // set VPN2 and PID for probe
|
||
mtc0 t1,entrylo0 // set first PTE value
|
||
mtc0 t2,entrylo1 // set second PTE value
|
||
mtc0 t3,index // set TB index value
|
||
nop // fill
|
||
tlbwi // write TB entry - 3 cycle hazzard
|
||
|
||
subu t6,t4,1 // compute block size minus one
|
||
and t7,t0,t6 // compute offset in block
|
||
addu a2,a2,t6 // round up to next block
|
||
addu a2,a2,t7 //
|
||
nor t6,t6,zero // complement block size minus one
|
||
and a2,a2,t6 // truncate length to even number
|
||
and t8,t0,t6 // compute starting virtual address
|
||
addu t9,t8,a2 // compute ending virtual address
|
||
subu t9,t9,t4 // compute ending loop address
|
||
|
||
//
|
||
// load data and flush it to correct the ECC
|
||
//
|
||
|
||
LOAD_RPL_ADDR(a3,a2) // get base flush address
|
||
lw t0,KiPcr + PcSecondLevelDcacheSize(zero) // get cache size
|
||
add t0,t0,-1 // mask of the cache size
|
||
.set noreorder
|
||
.set noat
|
||
|
||
50: lw t7,0(t8)
|
||
sw t7,0(t8)
|
||
|
||
and t7,t8,t0 // offset
|
||
addu t7,t7,a3 // physical address + offset
|
||
CONFIG_NONCOH(t2) // NON COHERENT algorithm
|
||
lw zero,0(t7) // load Cache -> Write back old Data
|
||
CONFIG_RESTORE(t2)
|
||
|
||
lw t7,0(t8) // t8 fffe0400 et entree tlb ->417 =>ok
|
||
|
||
bne t8,t9,50b // if ne, more blocks to invalidate
|
||
addu t8,t8,t4 // compute next block address (+Linesize)
|
||
|
||
60:
|
||
ENABLE_INTERRUPTS(t5) // enable interrupts
|
||
|
||
j ra // return
|
||
|
||
|
||
.end HalpMultiPciEccCorrector
|