213 lines
8.2 KiB
C
213 lines
8.2 KiB
C
/*++
|
|
|
|
Copyright (c) 1993 Microsoft Corporation
|
|
Copyright (c) 1994 Digital Equipment Corporation
|
|
|
|
Module Name:
|
|
|
|
pintolin.h
|
|
|
|
Abstract:
|
|
|
|
This file includes the platform-dependent Pin To Line Table.
|
|
|
|
Author:
|
|
|
|
Environment:
|
|
|
|
Kernel mode
|
|
|
|
Revision History:
|
|
|
|
Dick Bissen [DEC] 13-Sep-1994
|
|
|
|
|
|
--*/
|
|
|
|
//
|
|
// These tables represent the mapping from slot number and interrupt pin
|
|
// into a PCI Interrupt Vector.
|
|
//
|
|
// On Cabriolet, the interrupt vector is the Interrupt Request Register bit
|
|
// representing the interrupt + 1. The value also represents the interrupt
|
|
// mask register bit since the mask register and the request register have
|
|
// the same format.
|
|
//
|
|
// Formally, these mappings can be expressed as:
|
|
//
|
|
// PCIPinToLine:
|
|
// SlotNumber.DeviceNumber x InterruptPin -> InterruptLine
|
|
//
|
|
// LineToVector:
|
|
// InterruptLine -> InterruptVector
|
|
//
|
|
// VectorToIRRBit:
|
|
// InterruptVector -> InterruptRequestRegisterBit
|
|
//
|
|
// VectorToIMRBit:
|
|
// InterruptVector -> InterruptMaskRegisterBit
|
|
//
|
|
// SlotNumberToIDSEL:
|
|
// SlotNumber.DeviceNumber -> IDSEL
|
|
//
|
|
// subject to following invariants (predicates must always be true):
|
|
//
|
|
// Slot.DeviceNumber in {0,...,15}
|
|
//
|
|
// InterruptPin in {1, 2, 3, 4}
|
|
//
|
|
// InterruptRequestRegisterBit in {0,...,15}
|
|
//
|
|
// InterruptMaskRegisterBit in {0,...,15}
|
|
//
|
|
// PCIPinToLine(SlotNumber.DeviceNumber, InterruptPin) =
|
|
// PCIPinToLineTable[SlotNumber.DeviceNumber, InterruptPin]
|
|
// (Table-lookup function initialized below)
|
|
//
|
|
// LineToVector(InterruptLine) = PCI_VECTORS + InterruptLine
|
|
//
|
|
// VectorToIRRBit(InterruptVector) = InterruptVector - 1
|
|
//
|
|
// VectorToIMRBit(InterruptVector) [see below]
|
|
//
|
|
// SlotNumberToIDSEL(SlotNumber.DeviceNumber) = (1 << (Slot.DeviceNumber+11))
|
|
//
|
|
// where:
|
|
//
|
|
// SlotNumber.DeviceNumber:
|
|
// Alpha AXP Platforms receive interrupts on local PCI buses only, which
|
|
// are limited to 16 devices (PCI AD[11]-AD[26]). (We loose AD[17]-AD[31]
|
|
// since PCI Config space is a sparse space, requiring a five-bit shift.)
|
|
//
|
|
// InterruptPin:
|
|
// Each virtual slot has up to four interrupt pins INTA#, INTB#, INTC#, INTD#,
|
|
// as per the PCI Spec. V2.0, Section 2.2.6. (FYI, only multifunction devices
|
|
// use INTB#, INTC#, INTD#.)
|
|
//
|
|
// PCI configuration space indicates which interrupt pin a device will use
|
|
// in the InterruptPin register, which has the values:
|
|
//
|
|
// INTA# = 1, INTB#=2, INTC#=3, INTD# = 4
|
|
//
|
|
// Note that there may be up to 8 functions/device on a PCI multifunction
|
|
// device plugged into the option slots, e.g., Slot #0.
|
|
// Each function has its own PCI configuration space, addressed
|
|
// by the SlotNumber.FunctionNumber field, and will identify which
|
|
// interrput pin of the four it will use in its own InterruptPin register.
|
|
//
|
|
// If the option is a PCI-PCI bridge, interrupts across the bridge will
|
|
// somehow be combined to appear on some combination of the four
|
|
// interrupt pins that the bridge plugs into.
|
|
//
|
|
// InterruptLine:
|
|
// This PCI Configuration register, unlike x86 PC's, is maintained by
|
|
// software and represents offset into PCI interrupt vectors.
|
|
// Whenever HalGetBusData or HalGetBusDataByOffset is called,
|
|
// HalpPCIPinToLine() computes the correct InterruptLine register value
|
|
// by using the HalpPCIPinToLineTable mapping.
|
|
//
|
|
// InterruptRequestRegisterBit:
|
|
// 0xff is used to mark an invalid IRR bit, hence an invalid request
|
|
// for a vector. Also, note that the 16 bits of the EB66 IRR must
|
|
// be access as two 8-bit reads.
|
|
//
|
|
// InterruptMaskRegisterBit:
|
|
// On EB66, the PinToLine table may also be find the to write the
|
|
// InterruptMaskRegister. Formally, we can express this invariant as
|
|
//
|
|
// VectorToIMRBit(InterrruptVector) = InterruptVector - 1
|
|
//
|
|
// On Mustang, the table is useless. The InterruptMaskRegister has
|
|
// only two bits the completely mask all interrupts from either
|
|
// Slot #0 or Slot#1 (PCI AD[17] and AD[18]):
|
|
//
|
|
// InterruptVector in {3,4,5,6} then VectorToIMRBit(InterruptVector) = 0
|
|
// InterruptVector in {7,8,9,10} then VectorToIMRBit(InterruptVector) = 1
|
|
//
|
|
// IDSEL:
|
|
// For accessing PCI configuration space on a local PCI bus (as opposed
|
|
// to over a PCI-PCI bridge), type 0 configuration cycles must be generated.
|
|
// In this case, the IDSEL pin of the device to be accessed is tied to one
|
|
// of the PCI Address lines AD[11] - AD[26]. (The function field in the
|
|
// PCI address is used should we be accessing a multifunction device.)
|
|
// Anyway, virtual slot 0 represents the device with IDSEL = AD[11], and
|
|
// so on.
|
|
//
|
|
|
|
ULONG *HalpPCIPinToLineTable;
|
|
|
|
//
|
|
// Interrupt Vector Table Mapping for eb64p
|
|
//
|
|
// eb64p PCI interrupts are mapped to ISA IRQs in the table below.
|
|
//
|
|
// Limit init table to 14 entries, which is MAX_PCI_LOCAL_DEVICES_AVANTI.
|
|
// We won't ever try to set an InterruptLine register of a slot greater
|
|
// than Virtual slot 13 = PCI_AD[24].
|
|
//
|
|
|
|
/*!!!!!!!!!!!!!!!!!!CHANGE!!!!!!!!!!!!!!!!!!!!!*/
|
|
ULONG AlphaPC64PCIPinToLineTable[][4]=
|
|
{
|
|
// Pin 1 Pin 2 Pin 3 Pin 4
|
|
// ----- ----- ----- -----
|
|
{ 0xff, 0xff, 0xff, 0xff }, // Virtual Slot 0 = PCI_AD[11]
|
|
{ 0xff, 0xff, 0xff, 0xff }, // Virtual Slot 1 = PCI_AD[12]
|
|
{ 0xff, 0xff, 0xff, 0xff }, // Virtual Slot 2 = PCI_AD[13]
|
|
{ 0xff, 0xff, 0xff, 0xff }, // Virtual Slot 3 = PCI_AD[14]
|
|
{ 0xff, 0xff, 0xff, 0xff }, // Virtual Slot 4 = PCI_AD[15]
|
|
{ 0x3, 0x8, 0xc, 0x10 }, // Virtual Slot 5 = PCI_AD[16] bridge
|
|
{ 0x1, 0x6, 0xa, 0xe }, // Virtual Slot 6 = PCI_AD[17] Slot #0
|
|
{ 0x2, 0x7, 0xb, 0xf }, // Virtual Slot 7 = PCI_AD[18] Slot #1
|
|
{ 0x5, 0xff, 0xff, 0xff }, // Virtual Slot 8 = PCI_AD[19] SIO
|
|
{ 0x4, 0x9, 0xd, 0x11 }, // Virtual Slot 9 = PCI_AD[20] Slot #2
|
|
{ 0x12, 0x13, 0x14, 0x15 } // Virtual Slot 10 = PCI_AD[21] Slot #3
|
|
};
|
|
//ULONG AlphaPC64PCIPinToLineTable[][4]=
|
|
//{
|
|
// Pin 1 Pin 2 Pin 3 Pin 4
|
|
// ----- ----- ----- -----
|
|
// { 0xff, 0xff, 0xff, 0xff }, // Virtual Slot 0 = PCI_AD[11]
|
|
// { 0xff, 0xff, 0xff, 0xff }, // Virtual Slot 1 = PCI_AD[12]
|
|
// { 0xff, 0xff, 0xff, 0xff }, // Virtual Slot 2 = PCI_AD[13]
|
|
// { 0xff, 0xff, 0xff, 0xff }, // Virtual Slot 3 = PCI_AD[14]
|
|
// { 0xff, 0xff, 0xff, 0xff }, // Virtual Slot 4 = PCI_AD[15]
|
|
// { 0x3, 0x8, 0xc, 0x10 }, // Virtual Slot 5 = PCI_AD[16] Slot #2
|
|
// { 0x1, 0x6, 0xa, 0xe }, // Virtual Slot 6 = PCI_AD[17] Slot #0
|
|
// { 0x2, 0x7, 0xb, 0xf }, // Virtual Slot 7 = PCI_AD[18] Slot #1
|
|
// { 0x5, 0xff, 0xff, 0xff }, // Virtual Slot 8 = PCI_AD[19] SIO
|
|
// { 0x4, 0x9, 0xd, 0x11 } // Virtual Slot 9 = PCI_AD[20] Slot #3
|
|
//};
|
|
|
|
ULONG EB64PPCIPinToLineTable[][4]=
|
|
{
|
|
// Pin 1 Pin 2 Pin 3 Pin 4
|
|
// ----- ----- ----- -----
|
|
{ 0xff, 0xff, 0xff, 0xff }, // Virtual Slot 0 = PCI_AD[11]
|
|
{ 0xff, 0xff, 0xff, 0xff }, // Virtual Slot 1 = PCI_AD[12]
|
|
{ 0xff, 0xff, 0xff, 0xff }, // Virtual Slot 2 = PCI_AD[13]
|
|
{ 0xff, 0xff, 0xff, 0xff }, // Virtual Slot 3 = PCI_AD[14]
|
|
{ 0xff, 0xff, 0xff, 0xff }, // Virtual Slot 4 = PCI_AD[15]
|
|
{ 0x8, 0xff, 0xff, 0xff }, // Virtual Slot 5 = PCI_AD[16] SCSI
|
|
{ 0x1, 0x3, 0x5, 0x5 }, // Virtual Slot 6 = PCI_AD[17] Slot B
|
|
{ 0x2, 0x4, 0x9, 0x9 }, // Virtual Slot 7 = PCI_AD[18] Slot C
|
|
{ 0x6, 0xff, 0xff, 0xff }, // Virtual Slot 8 = PCI_AD[19] SIO
|
|
{ 0x7, 0xa, 0xb, 0xb } // Virtual Slot 9 = PCI_AD[20] Slot A
|
|
};
|
|
//ULONG EB64PPCIPinToLineTable[][4]=
|
|
//{
|
|
// Pin 1 Pin 2 Pin 3 Pin 4
|
|
// ----- ----- ----- -----
|
|
// { 0xff, 0xff, 0xff, 0xff }, // Virtual Slot 0 = PCI_AD[11]
|
|
// { 0xff, 0xff, 0xff, 0xff }, // Virtual Slot 1 = PCI_AD[12]
|
|
// { 0xff, 0xff, 0xff, 0xff }, // Virtual Slot 2 = PCI_AD[13]
|
|
// { 0xff, 0xff, 0xff, 0xff }, // Virtual Slot 3 = PCI_AD[14]
|
|
// { 0xff, 0xff, 0xff, 0xff }, // Virtual Slot 4 = PCI_AD[15]
|
|
// { 0x8, 0xff, 0xff, 0xff }, // Virtual Slot 5 = PCI_AD[16] SCSI
|
|
// { 0x1, 0x3, 0x5, 0xa }, // Virtual Slot 6 = PCI_AD[17] Slot #0
|
|
// { 0x2, 0x4, 0x9, 0xb }, // Virtual Slot 7 = PCI_AD[18] Slot #1
|
|
// { 0x6, 0xff, 0xff, 0xff }, // Virtual Slot 8 = PCI_AD[19] SIO
|
|
// { 0x7, 0xff, 0xff, 0xff } // Virtual Slot 9 = PCI_AD[20] Tulip
|
|
//};
|
|
|