296 lines
10 KiB
MonkeyC
296 lines
10 KiB
MonkeyC
;/*++ BUILD Version: 0001 // Increment this if a change has global effects
|
|
;
|
|
;Copyright (c) 1992, 1993 Microsoft Corporation
|
|
;
|
|
;Module Name:
|
|
;
|
|
; ntiologc.h
|
|
;
|
|
;Abstract:
|
|
;
|
|
; Constant definitions for the I/O error code log values.
|
|
;
|
|
;Author:
|
|
;
|
|
; Tony Ercolano (Tonye) 12-23-1992
|
|
;
|
|
;Revision History:
|
|
;
|
|
;--*/
|
|
;
|
|
;#ifndef _SERLOG_
|
|
;#define _SERLOG_
|
|
;
|
|
;//
|
|
;// Status values are 32 bit values layed out as follows:
|
|
;//
|
|
;// 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
|
|
;// 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
|
|
;// +---+-+-------------------------+-------------------------------+
|
|
;// |Sev|C| Facility | Code |
|
|
;// +---+-+-------------------------+-------------------------------+
|
|
;//
|
|
;// where
|
|
;//
|
|
;// Sev - is the severity code
|
|
;//
|
|
;// 00 - Success
|
|
;// 01 - Informational
|
|
;// 10 - Warning
|
|
;// 11 - Error
|
|
;//
|
|
;// C - is the Customer code flag
|
|
;//
|
|
;// Facility - is the facility code
|
|
;//
|
|
;// Code - is the facility's status code
|
|
;//
|
|
;
|
|
MessageIdTypedef=NTSTATUS
|
|
|
|
SeverityNames=(Success=0x0:STATUS_SEVERITY_SUCCESS
|
|
Informational=0x1:STATUS_SEVERITY_INFORMATIONAL
|
|
Warning=0x2:STATUS_SEVERITY_WARNING
|
|
Error=0x3:STATUS_SEVERITY_ERROR
|
|
)
|
|
|
|
FacilityNames=(System=0x0
|
|
RpcRuntime=0x2:FACILITY_RPC_RUNTIME
|
|
RpcStubs=0x3:FACILITY_RPC_STUBS
|
|
Io=0x4:FACILITY_IO_ERROR_CODE
|
|
Serial=0x6:FACILITY_SERIAL_ERROR_CODE
|
|
)
|
|
|
|
|
|
MessageId=0x0001 Facility=Serial Severity=Informational SymbolicName=SERIAL_KERNEL_DEBUGGER_ACTIVE
|
|
Language=English
|
|
The kernel debugger is already using %2.
|
|
.
|
|
|
|
MessageId=0x0002 Facility=Serial Severity=Informational SymbolicName=SERIAL_FIFO_PRESENT
|
|
Language=English
|
|
While validating that %2 was really a serial port, a fifo was detected. The fifo will be used.
|
|
.
|
|
|
|
MessageId=0x0003 Facility=Serial Severity=Informational SymbolicName=SERIAL_USER_OVERRIDE
|
|
Language=English
|
|
User configuration data for parameter %2 overriding firmware configuration data.
|
|
.
|
|
|
|
MessageId=0x0004 Facility=Serial Severity=Warning SymbolicName=SERIAL_NO_SYMLINK_CREATED
|
|
Language=English
|
|
Unable to create the symbolic link for %2.
|
|
.
|
|
|
|
MessageId=0x0005 Facility=Serial Severity=Warning SymbolicName=SERIAL_NO_DEVICE_MAP_CREATED
|
|
Language=English
|
|
Unable to create the device map entry for %2.
|
|
.
|
|
|
|
MessageId=0x0006 Facility=Serial Severity=Warning SymbolicName=SERIAL_NO_DEVICE_MAP_DELETED
|
|
Language=English
|
|
Unable to delete the device map entry for %2.
|
|
.
|
|
|
|
MessageId=0x0007 Facility=Serial Severity=Error SymbolicName=SERIAL_UNREPORTED_IRQL_CONFLICT
|
|
Language=English
|
|
Another driver on the system, which did not report its resources, has already claimed the interrupt used by %2.
|
|
.
|
|
|
|
MessageId=0x0008 Facility=Serial Severity=Error SymbolicName=SERIAL_INSUFFICIENT_RESOURCES
|
|
Language=English
|
|
Not enough resources were available for the driver.
|
|
.
|
|
|
|
MessageId=0x0009 Facility=Serial Severity=Error SymbolicName=SERIAL_UNSUPPORTED_CLOCK_RATE
|
|
Language=English
|
|
The baud clock rate configuration is not supported on device %2.
|
|
.
|
|
|
|
MessageId=0x000A Facility=Serial Severity=Error SymbolicName=SERIAL_REGISTERS_NOT_MAPPED
|
|
Language=English
|
|
The hardware locations for %2 could not be translated to something the memory management system could understand.
|
|
.
|
|
|
|
MessageId=0x000B Facility=Serial Severity=Error SymbolicName=SERIAL_RESOURCE_CONFLICT
|
|
Language=English
|
|
The hardware resources for %2 are already in use by another device.
|
|
.
|
|
|
|
MessageId=0x000C Facility=Serial Severity=Error SymbolicName=SERIAL_NO_BUFFER_ALLOCATED
|
|
Language=English
|
|
No memory could be allocated in which to place new data for %2.
|
|
.
|
|
|
|
MessageId=0x000D Facility=Serial Severity=Error SymbolicName=SERIAL_IER_INVALID
|
|
Language=English
|
|
While validating that %2 was really a serial port, the interrupt enable register contained enabled bits in a must be zero bitfield.
|
|
The device is assumed not to be a serial port and will be deleted.
|
|
.
|
|
|
|
MessageId=0x000E Facility=Serial Severity=Error SymbolicName=SERIAL_MCR_INVALID
|
|
Language=English
|
|
While validating that %2 was really a serial port, the modem control register contained enabled bits in a must be zero bitfield.
|
|
The device is assumed not to be a serial port and will be deleted.
|
|
.
|
|
|
|
MessageId=0x000F Facility=Serial Severity=Error SymbolicName=SERIAL_IIR_INVALID
|
|
Language=English
|
|
While validating that %2 was really a serial port, the interrupt id register contained enabled bits in a must be zero bitfield.
|
|
The device is assumed not to be a serial port and will be deleted.
|
|
.
|
|
|
|
MessageId=0x0010 Facility=Serial Severity=Error SymbolicName=SERIAL_DL_INVALID
|
|
Language=English
|
|
While validating that %2 was really a serial port, the baud rate register could not be set consistantly.
|
|
The device is assumed not to be a serial port and will be deleted.
|
|
.
|
|
|
|
MessageId=0x0011 Facility=Serial Severity=Error SymbolicName=SERIAL_NOT_ENOUGH_CONFIG_INFO
|
|
Language=English
|
|
Some firmware configuration information was incomplete.
|
|
.
|
|
|
|
MessageId=0x0012 Facility=Serial Severity=Error SymbolicName=SERIAL_NO_PARAMETERS_INFO
|
|
Language=English
|
|
No Parameters subkey was found for user defined data. This is odd, and it also means no user configuration can be found.
|
|
.
|
|
|
|
MessageId=0x0013 Facility=Serial Severity=Error SymbolicName=SERIAL_UNABLE_TO_ACCESS_CONFIG
|
|
Language=English
|
|
Specific user configuration data is unretrievable.
|
|
.
|
|
|
|
MessageId=0x0014 Facility=Serial Severity=Error SymbolicName=SERIAL_INVALID_PORT_INDEX
|
|
Language=English
|
|
On parameter %2 which indicates a multiport card, must have a port index specified greater than 0.
|
|
.
|
|
|
|
MessageId=0x0015 Facility=Serial Severity=Error SymbolicName=SERIAL_PORT_INDEX_TOO_HIGH
|
|
Language=English
|
|
On parameter %2 which indicates a multiport card, the port index for the multiport card is too large.
|
|
.
|
|
|
|
MessageId=0x0016 Facility=Serial Severity=Error SymbolicName=SERIAL_UNKNOWN_BUS
|
|
Language=English
|
|
The bus type for %2 is not recognizable.
|
|
.
|
|
|
|
MessageId=0x0017 Facility=Serial Severity=Error SymbolicName=SERIAL_BUS_NOT_PRESENT
|
|
Language=English
|
|
The bus type for %2 is not available on this computer.
|
|
.
|
|
|
|
MessageId=0x0018 Facility=Serial Severity=Error SymbolicName=SERIAL_BUS_INTERRUPT_CONFLICT
|
|
Language=English
|
|
The bus specified for %2 does not support the specified method of interrupt.
|
|
.
|
|
|
|
MessageId=0x0019 Facility=Serial Severity=Error SymbolicName=SERIAL_INVALID_USER_CONFIG
|
|
Language=English
|
|
User configuration for parameter %2 must have %3.
|
|
.
|
|
|
|
MessageId=0x001A Facility=Serial Severity=Error SymbolicName=SERIAL_DEVICE_TOO_HIGH
|
|
Language=English
|
|
The user specified port for %2 is way too high in physical memory.
|
|
.
|
|
|
|
MessageId=0x001B Facility=Serial Severity=Error SymbolicName=SERIAL_STATUS_TOO_HIGH
|
|
Language=English
|
|
The status port for %2 is way too high in physical memory.
|
|
.
|
|
|
|
MessageId=0x001C Facility=Serial Severity=Error SymbolicName=SERIAL_STATUS_CONTROL_CONFLICT
|
|
Language=English
|
|
The status port for %2 overlaps the control registers for the device.
|
|
.
|
|
|
|
MessageId=0x001D Facility=Serial Severity=Error SymbolicName=SERIAL_CONTROL_OVERLAP
|
|
Language=English
|
|
The control registers for %2 overlaps with the %3 control registers.
|
|
.
|
|
|
|
MessageId=0x001E Facility=Serial Severity=Error SymbolicName=SERIAL_STATUS_OVERLAP
|
|
Language=English
|
|
The status register for %2 overlaps the %3 control registers.
|
|
.
|
|
|
|
MessageId=0x001F Facility=Serial Severity=Error SymbolicName=SERIAL_STATUS_STATUS_OVERLAP
|
|
Language=English
|
|
The status register for %2 overlaps with the %3 status register.
|
|
.
|
|
|
|
MessageId=0x0020 Facility=Serial Severity=Error SymbolicName=SERIAL_CONTROL_STATUS_OVERLAP
|
|
Language=English
|
|
The control registers for %2 overlaps the %3 status register.
|
|
.
|
|
|
|
MessageId=0x0021 Facility=Serial Severity=Error SymbolicName=SERIAL_MULTI_INTERRUPT_CONFLICT
|
|
Language=English
|
|
Two ports, %2 and %3, on a single multiport card can't have two different interrupts.
|
|
.
|
|
|
|
MessageId=0x0022 Facility=Serial Severity=Informational SymbolicName=SERIAL_DISABLED_PORT
|
|
Language=English
|
|
Disabling %2 as requested by the configuration data.
|
|
.
|
|
|
|
MessageId=0x0023 Facility=Serial Severity=Error SymbolicName=SERIAL_GARBLED_PARAMETER
|
|
Language=English
|
|
Parameter %2 data is unretrievable from the registry.
|
|
.
|
|
|
|
MessageId=0x0024 Facility=Serial Severity=Error SymbolicName=SERIAL_DLAB_INVALID
|
|
Language=English
|
|
While validating that %2 was really a serial port, the contents of the divisor latch register was identical to the interrupt enable and the receive registers.
|
|
The device is assumed not to be a serial port and will be deleted.
|
|
.
|
|
|
|
MessageId=0x0025 Facility=Serial Severity=Error SymbolicName=SERIAL_NO_TRANSLATE_PORT
|
|
Language=English
|
|
Could not translate the user reported I/O port for %2.
|
|
.
|
|
|
|
MessageId=0x0026 Facility=Serial Severity=Error SymbolicName=SERIAL_NO_GET_INTERRUPT
|
|
Language=English
|
|
Could not get the user reported interrupt for %2 from the HAL.
|
|
.
|
|
|
|
MessageId=0x0027 Facility=Serial Severity=Error SymbolicName=SERIAL_NO_TRANSLATE_ISR
|
|
Language=English
|
|
Could not translate the user reported Interrupt Status Register for %2.
|
|
.
|
|
|
|
MessageId=0x0028 Facility=Serial Severity=Error SymbolicName=SERIAL_NO_DEVICE_REPORT
|
|
Language=English
|
|
Could not report the discovered legacy device %2 to the IO subsystem.
|
|
.
|
|
|
|
MessageId=0x0029 Facility=Serial Severity=Error SymbolicName=SERIAL_REGISTRY_WRITE_FAILED
|
|
Language=English
|
|
Error writing to the registry.
|
|
.
|
|
|
|
MessageId=0x002A Facility=Serial Severity=Warning SymbolicName=SERIAL_MOUSE_CONFLICT_IRQ
|
|
Language=English
|
|
There is a serial mouse using the same interrupt as %2. Therefore, %2 will not be started.
|
|
.
|
|
|
|
MessageId=0x002B Facility=Serial Severity=Warning SymbolicName=SERIAL_MOUSE_ON_PORT
|
|
Language=English
|
|
There was a serial mouse found on %2. Therefore, %2 will be assigned to the mouse.
|
|
.
|
|
|
|
MessageId=0x002C Facility=Serial Severity=Error SymbolicName=SERIAL_NO_DEVICE_REPORT_RES
|
|
Language=English
|
|
Could not report device %2 to IO subsystem due to a resource conflict.
|
|
.
|
|
|
|
MessageId=0x002D Facility=Serial Severity=Error SymbolicName=SERIAL_HARDWARE_FAILURE
|
|
Language=English
|
|
The serial driver detected a hardware failure on device %2 and will disable this device.
|
|
.
|
|
|
|
;#endif /* _NTIOLOGC_ */
|