344 lines
8.7 KiB
C
344 lines
8.7 KiB
C
|
|
#if !defined( __USBSC_H__ )
|
|
#define __USBSC_H__
|
|
|
|
#define DRIVER_NAME "USBSC"
|
|
|
|
#include <NTDDK.H>
|
|
#include "smclib.h"
|
|
#include <windef.h>
|
|
#include <usb.h>
|
|
#include "usbutil.h"
|
|
#include "scutil.h"
|
|
|
|
|
|
#define ESCAPE_COMMAND_ENABLE L"EscapeCommandEnable"
|
|
|
|
#define SMARTCARD_POOL_TAG 'DICC'
|
|
#define CCID_CLASS_DESCRIPTOR_TYPE 0x21
|
|
|
|
#define PC_to_RDR_IccPowerOn 0x62
|
|
#define PC_to_RDR_IccPowerOff 0x63
|
|
#define PC_to_RDR_GetSlotStatus 0x65
|
|
#define PC_to_RDR_XfrBlock 0x6F
|
|
#define PC_to_RDR_GetParameters 0x6C
|
|
#define PC_to_RDR_ResetParameters 0x6D
|
|
#define PC_to_RDR_SetParameters 0x61
|
|
#define PC_to_RDR_Escape 0x6B
|
|
#define PC_to_RDR_IccClock 0x6E
|
|
#define PC_to_RDR_T0APDU 0x6A
|
|
#define PC_to_RDR_Secure 0x69
|
|
#define PC_to_RDR_Mechanical 0x71
|
|
#define PC_to_RDR_Abort 0x72
|
|
#define PC_to_RDR_SetDataRateAndClockFrequency 0x73
|
|
|
|
#define RDR_to_PC_DataBlock 0x80
|
|
#define RDR_to_PC_SlotStatus 0x81
|
|
#define RDR_to_PC_Parameters 0x82
|
|
#define RDR_to_PC_Escape 0x83
|
|
#define RDR_to_PC_DataRateAndClockFrequency 0x84
|
|
|
|
#define RDR_to_PC_NotifySlotChange 0x50
|
|
#define RDR_to_PC_HardwareError 0x51
|
|
|
|
#define ABORT 0x01
|
|
#define GET_CLOCK_FREQUENCIES 0x02
|
|
#define GET_DATA_RATES 0x03
|
|
|
|
#define CMD_ABORTED 0xFF
|
|
#define ICC_MUTE 0xFE
|
|
#define XFR_PARITY_ERROR 0xFD
|
|
#define XFR_OVERRUN 0xFC
|
|
#define HW_ERROR 0xFB
|
|
|
|
#define BAD_ATR_TS 0xF8
|
|
#define BAD_ATR_TCK 0xF7
|
|
#define ICC_PROTOCOL_NOT_SUPPORTED 0xF6
|
|
#define ICC_CLASS_NOT_SUPPORTED 0xF5
|
|
#define PROCEDURE_BYTE_CONFLICT 0xF4
|
|
#define DEACTIVATED_PROTOCOL 0xF3
|
|
#define BUSY_WITH_AUTO_SEQUENCE 0xF2
|
|
|
|
#define PIN_TIMEOUT 0xF0
|
|
#define PIN_CANCELLED 0xEF
|
|
|
|
#define CMD_SLOT_BUSY 0xE0
|
|
|
|
#define COMMAND_STATUS_MASK 0xC0
|
|
#define COMMAND_STATUS_FAILED 0x40
|
|
#define COMMAND_STATUS_TIME_EXT 0x80
|
|
#define COMMAND_STATUS_SUCCESS 0x00
|
|
#define ICC_STATUS_MASK 0x03
|
|
|
|
#define CHARACTER_LEVEL 0x00
|
|
#define TPDU_LEVEL 0x01
|
|
#define SHORT_APDU_LEVEL 0x02
|
|
#define EXTENDED_APDU_LEVEL 0x04
|
|
|
|
#define ATR_SIZE 64
|
|
|
|
#define AUTO_PARAMETER_CONFIG 0x02
|
|
#define AUTO_ICC_ACTIVATION 0x04
|
|
#define AUTO_VOLTAGE_SELECTION 0x08
|
|
#define AUTO_CLOCK_FREQ 0x10
|
|
#define AUTO_BAUD_RATE 0x20
|
|
#define AUTO_PARAMETER_NEGOTIATION 0x40
|
|
#define AUTO_PPS 0x80
|
|
#define AUTO_CLOCK_STOP 0x100
|
|
#define NOZERO_NAD_ACCEPT 0x200
|
|
#define AUTO_IFSD_EXCHANGE 0x400
|
|
#define TPDU_EXCHANGE_LEVEL 0x10000
|
|
#define SHORT_APDU_EXCHANGE 0x20000
|
|
#define EXT_APDU_EXCHANGE 0x40000
|
|
|
|
#define SLOT0_MASK 0x3
|
|
#define SLOT1_MASK 0xc
|
|
#define SLOT2_MASK 0x30
|
|
#define SLOT3_MASK 0xc0
|
|
|
|
#define IOCTL_CCID_ESCAPE SCARD_CTL_CODE(3500)
|
|
|
|
|
|
#include <pshpack1.h>
|
|
typedef struct _CCID_CLASS_DESCRIPTOR
|
|
{
|
|
BYTE bLength;
|
|
BYTE bDescriptorType;
|
|
WORD bcdCCID;
|
|
BYTE bMaxSlotIndex;
|
|
BYTE bVoltageSupport;
|
|
DWORD dwProtocols;
|
|
DWORD dwDefaultClock;
|
|
DWORD dwMaximumClock;
|
|
BYTE bNumClockSupported;
|
|
DWORD dwDataRate;
|
|
DWORD dwMaxDataRate;
|
|
BYTE bNumDataRatesSupported;
|
|
DWORD dwMaxIFSD;
|
|
DWORD dwSynchProtocols;
|
|
DWORD dwMechanical;
|
|
DWORD dwFeatures;
|
|
DWORD dwMaxCCIDMessageLength;
|
|
BYTE bClassGetResponse;
|
|
BYTE bClassEnvelope;
|
|
WORD wLcdLayout;
|
|
BYTE bPINSupport;
|
|
BYTE bMaxCCIDBusySlots;
|
|
|
|
} CCID_CLASS_DESCRIPTOR, *PCCID_CLASS_DESCRIPTOR;
|
|
|
|
#include <poppack.h>
|
|
|
|
typedef struct _DEVICE_EXTENSION
|
|
{
|
|
SCUTIL_HANDLE ScUtilHandle; // Utility library handle
|
|
USB_WRAPPER_HANDLE WrapperHandle; // Points to the storage used by the Usb Wrapper
|
|
SMARTCARD_EXTENSION SmartcardExtension;
|
|
PDEVICE_OBJECT LowerDeviceObject;
|
|
PDEVICE_OBJECT PhysicalDeviceObject;
|
|
IO_REMOVE_LOCK RemoveLock;
|
|
ULONG DeviceInstance;
|
|
DEVICE_POWER_STATE PowerState; // Used to keep track of the current power state the reader is in
|
|
USBD_INTERFACE_INFORMATION* Interface;
|
|
PUSB_DEVICE_DESCRIPTOR DeviceDescriptor;
|
|
DEVICE_CAPABILITIES DeviceCapabilities;
|
|
|
|
} DEVICE_EXTENSION, *PDEVICE_EXTENSION;
|
|
|
|
typedef struct _READER_EXTENSION {
|
|
|
|
|
|
BOOLEAN CardPresent;
|
|
|
|
USBD_PIPE_HANDLE BulkOutHandle;
|
|
UINT BulkOutIndex;
|
|
|
|
USBD_PIPE_HANDLE BulkInHandle;
|
|
UINT BulkInIndex;
|
|
|
|
USBD_PIPE_HANDLE InterruptHandle;
|
|
UINT InterruptIndex;
|
|
|
|
// Current reader power state.
|
|
// READER_POWER_STATE ReaderPowerState;
|
|
|
|
// read timeout in ms
|
|
ULONG ReadTimeout;
|
|
|
|
PDEVICE_OBJECT DeviceObject;
|
|
DWORD SequenceNumber;
|
|
|
|
PDEVICE_EXTENSION DeviceExtension;
|
|
|
|
DWORD MaxMessageLength;
|
|
|
|
WORD ExchangeLevel;
|
|
|
|
CCID_CLASS_DESCRIPTOR
|
|
ClassDescriptor;
|
|
|
|
BYTE CurrentVoltage;
|
|
|
|
BOOLEAN EscapeCommandEnabled;
|
|
|
|
} READER_EXTENSION, *PREADER_EXTENSION;
|
|
|
|
#include <pshpack1.h>
|
|
|
|
|
|
typedef struct _USBSC_OUT_MESSAGE_HEADER
|
|
{
|
|
|
|
BYTE bMessageType;
|
|
DWORD dwLength;
|
|
BYTE bSlot;
|
|
BYTE bSeq;
|
|
|
|
union {
|
|
|
|
BYTE bPowerSelect;
|
|
|
|
struct {
|
|
BYTE bBWI;
|
|
WORD wLevelParameter;
|
|
};
|
|
|
|
BYTE bProtocolNum;
|
|
|
|
BYTE bClockCommand;
|
|
|
|
struct {
|
|
BYTE bmChanges;
|
|
BYTE bClassGetResponse;
|
|
BYTE bClassEnvelope;
|
|
};
|
|
|
|
BYTE bFunction;
|
|
|
|
};
|
|
|
|
} USBSC_OUT_MESSAGE_HEADER, *PUSBSC_OUT_MESSAGE_HEADER;
|
|
|
|
typedef struct _USBSC_IN_MESSAGE_HEADER
|
|
{
|
|
|
|
BYTE bMessageType;
|
|
DWORD dwLength;
|
|
BYTE bSlot;
|
|
BYTE bSeq;
|
|
BYTE bStatus;
|
|
BYTE bError;
|
|
|
|
union {
|
|
BYTE bChainParameter;
|
|
BYTE bClockStatus;
|
|
BYTE bProtocolNum;
|
|
};
|
|
|
|
} USBSC_IN_MESSAGE_HEADER, *PUSBSC_IN_MESSAGE_HEADER;
|
|
|
|
typedef struct _USBSC_SLOT_CHANGE_HEADER
|
|
{
|
|
|
|
BYTE bMessageType;
|
|
BYTE bmSlotICCState;
|
|
|
|
} USBSC_SLOT_CHANGE_HEADER, *PUSBSC_SLOT_CHANGE_HEADER;
|
|
|
|
typedef struct _USBSC_HWERROR_HEADER
|
|
{
|
|
|
|
BYTE bMessageType;
|
|
BYTE bSlot;
|
|
BYTE bSeq;
|
|
BYTE bHardwareErrorCode;
|
|
|
|
} USBSC_HWERROR_HEADER, *PUSBSC_HWERROR_HEADER;
|
|
|
|
|
|
typedef struct _PROTOCOL_DATA_T0
|
|
{
|
|
|
|
BYTE bmFindexDindex;
|
|
BYTE bmTCCKST0;
|
|
BYTE bGuardTimeT0;
|
|
BYTE bWaitingIntegerT0;
|
|
BYTE bClockStop;
|
|
|
|
} PROTOCOL_DATA_T0, *PPROTOCOL_DATA_T0;
|
|
|
|
typedef struct _PROTOCOL_DATA_T1
|
|
{
|
|
BYTE bmFindexDindex;
|
|
BYTE bmTCCKST1;
|
|
BYTE bGuardTimeT1;
|
|
BYTE bmWaitingIntegersT1;
|
|
BYTE bClockStop;
|
|
BYTE bIFSC;
|
|
BYTE bNadValue;
|
|
|
|
} PROTOCOL_DATA_T1, *PPROTOCOL_DATA_T1;
|
|
|
|
typedef struct _CLOCK_AND_DATA_RATE
|
|
{
|
|
DWORD dwClockFrequency;
|
|
DWORD dwDataRate;
|
|
|
|
} CLOCK_AND_DATA_RATE, *PCLOCK_AND_DATA_RATE;
|
|
|
|
typedef struct _PIN_VERIFICATION_DATA
|
|
{
|
|
BYTE bTimeOut;
|
|
BYTE bmFormatString;
|
|
BYTE bmPINBlockString;
|
|
BYTE bmPINLengthFormat;
|
|
WORD wPINMaxExtraDigit;
|
|
BYTE bEntryValidationCondition;
|
|
BYTE bNumberMessage;
|
|
WORD wLangId;
|
|
BYTE bMsgIndex;
|
|
BYTE bTeoPrologue;
|
|
WORD wRFU;
|
|
} PIN_VERIFICATION_DATA, *PPIN_VERIFICATION_DATA;
|
|
|
|
typedef struct _PIN_MODIFICATION_DATA
|
|
{
|
|
BYTE bTimeOut;
|
|
BYTE bmFormatString;
|
|
BYTE bmPINBlockString;
|
|
BYTE bmPinLengthFormat;
|
|
BYTE bInsertionOffsetOld;
|
|
BYTE bInsertionOffsetNew;
|
|
WORD wPINMaxExtraDigit;
|
|
BYTE bConfirmPIN;
|
|
BYTE bEntryValidationCondition;
|
|
BYTE bNumberMessage;
|
|
WORD wLangId;
|
|
BYTE bMsgIndex1;
|
|
BYTE bMsgIndex2;
|
|
BYTE bMsgIndex3;
|
|
BYTE bTeoPrologue;
|
|
WORD wRFU;
|
|
|
|
} PIN_MODIFICATION_DATA, *PPIN_MODIFICATION_DATA;
|
|
|
|
typedef struct _PPS_REQUEST
|
|
{
|
|
BYTE bPPSS;
|
|
BYTE bPPS0;
|
|
BYTE bPPS1;
|
|
BYTE bPCK;
|
|
} PPS_REQUEST, *PPPS_REQUEST;
|
|
#include <poppack.h>
|
|
|
|
|
|
|
|
NTSTATUS
|
|
DriverEntry(
|
|
PDRIVER_OBJECT DriverObject,
|
|
PUNICODE_STRING RegistryPath
|
|
);
|
|
|
|
#endif // !__USBSC_H__
|
|
|