WindowsXP-SP1/mergedcomponents/setupinfs/jpn/txtsetup.txt
2020-09-30 16:53:49 +02:00

749 lines
15 KiB
Plaintext
Raw Permalink Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

@*: Lines marked with @w: are for workstation only
@*: Lines marked with @s: are for server only
@*: Lines marked with @@: are for both
[nls]
;
; These values are used by setupldr when starting text setup
; and by text setup to initialize nls values in the registry.
;
; For the codepage and UnicodeCasetable entries, the values are
; <filename>,<identifier> pairs. Setupldr uses the first <filename>
; as the file to load for use during text setup.
;
AnsiCodepage = c_932.nls,932
OemCodepage = c_932.nls,932
MacCodepage = c_10001.nls,10001
UnicodeCasetable = l_intl.nls,0411
OemHalFont = vgaoem.fon
@@!n:DefaultLayout = E0010411
@n:DefaultLayout = E0010411,KBDNEC.DLL
[Keyboard]
@@:PCAT_106KEY = "106 Japanese Keyboard (Including USB)" ,files.kbd106,i8042prt, KBD106.DLL, 7, 2, PCAT_106KEY
@@:STANDARD = "101 English Keyboard (Including USB)" ,files.kbd101,i8042prt,KBD101.DLL, 7, 0, PCAT_101KEY
@@:LAYOUT98 = "NEC 98 Layout USB Keyboard",files.LAYOUT98,i8042prt,KBDNEC.DLL, 7, 2, LAYOUT98
@*:@@!n:AX_105KEY = "AX 日本語 キーボード" ,files.kbdax2,i8042prt, KBDAX2.DLL, 7, 1, AX_105KEY
@*:@@!n:IBM_002_106KEY = "IBM-5576 002/003 キーボード" ,files.kbdibm02,i8042prt,KBDIBM02.DLL, 7, 3, IBM_002_106KEY
kbdhid = "USB Keyboard",files.kbdhid,kbdhid
@i:USB = "USB Keyboard",files.kbdhid,kbdhid
[Files.BackupOnUpgrade]
[Files.BackupOnOverwrite]
[FontListE]
" ゴシック & Pゴシック & MS UI Gothic (TrueType)" = MSGOTHIC.TTC
" 明朝 & P明朝 (TrueType)" = MSMINCHO.TTC
["Keyboard Layout"]
00000411 = "日本語"
E0010411 = "日本語 (MS-IME2002)"
[Files.KeyboardLayout]
00000411 = KBDJPN.DLL,2
E0010411 = KBDJPN.DLL,2
[files.kbd101]
kbd101.dll,2
i8042prt.sys,4
[files.kbd106]
kbd106.dll,2
i8042prt.sys,4
[files.kbdax2]
kbdax2.dll,2
i8042prt.sys,4
[files.kbdibm02]
kbdibm02.dll,2
i8042prt.sys,4
[files.LAYOUT98]
kbdnec.dll,2
i8042prt.sys,4
[Files.DeleteOnUpgrade]
; from NT 3.1
@@:imesel.cpl , 2
@@:gaijiedt.exe , 2
@@:gaijiedt.hlp , 2
@@:fsvga.dll , 2
@@:foncache.dll , 2
@@:eudcsrv.dll , 2
@@:userfont.dll , 2
@@:j13fix.fon , 5
@@:j13oem.fon , 5
@@:j13sys.fon , 5
@@:j18fix.fon , 5
@@:j18oem.fon , 5
@@:j18sys.fon , 5
@@:j22fix.fon , 5
@@:j22oem.fon , 5
@@:j22sys.fon , 5
@@:j27fix.fon , 5
@@:j27oem.fon , 5
@@:j27sys.fon , 5
@@:msgothic.ttf , 5
@@:msgothic.fot , 5
@@:msmincho.ttf , 5
@@:msmincho.fot , 5
; from NT 3.51
@@:eudcedit.exe , 2
@@:eudcedit.hlp , 2
@@:eudcedit.cnt , 2
@@:imedp.dll , 2
; from NT 4.0
@@:vgasysj.fon , 22
@@:vgafixj.fon , 22
@@:8514sysj.fon , 22
@@:8514fixj.fon , 22
@@:8514oemj.fon , 22
@@:parps55.sys , 4
@@:parcpl.cpl , 2
@i:@@:oak611.sys , 4
@i:@@:oak611.dll , 2
@i:@@:neckbrep.sys , 4
@i:@@:usbkbdwm.sys , 4
@i:@@:fsvga.sys , 4
[HardwareIdsDatabase]
*PNP0320 = "i8042prt",{4D36E96B-E325-11CE-BFC1-08002BE10318} ; keyboard class
[FileFlags]
app932.fon = 16
j8514fix.fon = 16
j8514oem.fon = 16
j8514sys.fon = 16
jsmalle.fon = 16
jsmallf.fon = 16
jvgafix.fon = 16
jvgasys.fon = 16
vga932.fon = 16
xjis.nls = 16
ksc.nls = 16
prc.nls = 16
prcp.nls = 16
big5.nls = 16
bopomofo.nls = 16
c_10001.nls = 16
; IMJP8.1 WOW64 and Native64
@m:imjpch.dic = 16
@m:imjpln.dic = 16
@m:imjpnm.dic = 16
@m:imjpsb.dic = 16
@m:imjpst.dic = 16
@m:imjptk.dic = 16
@m:imjpzp.dic = 16
@m:imjpgn.grm = 16
[SystemPartitionFiles]
@i:@@:bootfont.bin,"\"
[HiveInfs.Upgrade]
AddReg = hivesft.inf,AddRegUpg
;
; This section provides information about hard disk drivers.
;
; The left hand side is a name in the \Driver directory in the NT
; \Driver object namespace.
;
; Value #0 is a format string used in creating the descriptive name
; of the disk.
;
[DiskDriverMap]
abiosdsk = "%1!u! MB マイクロ チャネル ディスク"
atdisk = "%1!u! MB IDE/ESDI ディスク"
disk = "%1!u! MB ディスク %2!u! Id %3!u! (バス %4!u! %5 上)"
[ScsiClass]
cdrom = "SCSI CD-ROM"
floppy = "SCSI Floppy Disk"
disk = "SCSI Disk"
ramdisk = "RAM Disk Driver"
[FileSystems]
fat = "FAT File System"
ntfs = "Windows NT File System (NTFS)"
ksecdd = "Kernel Security Provider"
[FloppyDrivers]
floppy = "Standard Floppy Disk"
fat = "FAT File System"
[CdRomDrivers]
cdfs = "CD-ROM File System"
[MouseDrivers]
mouclass = "Mouse Class Driver"
mouhid = "HID Mouse Filter Driver"
;
; Font list
;
; Setup will create an entry in the [Fonts] section of win.ini
; for each of the following fonts. (Fonts copied during GUI setup
; have entries in [FontList] in a gui inf file -- see eng_ansi.txt.)
; Note that the [fonts] section of win.ini is shadowed into
; HEKY_LOCAL_MACHINE\software\Microsoft\Windows NT\CurrentVersion\Fonts.
;
[FontListE]
"Courier 10,12,15 (VGA res)" = COURE.FON
"MS Sans Serif 8,10,12,14,18,24 (VGA res)" = SSERIFE.FON
"MS Serif 8,10,12,14,18,24 (VGA res)" = SERIFE.FON
"Tahoma (TrueType)" = TAHOMA.TTF
"Microsoft Sans Serif (TrueType)" = MICROSS.TTF
@*:
@*: If add a keyboard layout dll description here make sure
@*: that you add the layout dll file name in [CmdConsFiles]
@*: section in dosnet.inf also, so that when command console
@*: is installed on the harddisk that particular layout file
@*: can be copied
@*:
["Keyboard Layout"]
0000041C = "アルバニア語"
00000423 = "ベラルーシ語"
00000813 = "オランダ語 (ベルギー)"
0000080C = "フランス語 (ベルギー)"
00000416 = "ブルガリア語 (ABNT)"
00000402 = "ブルガリア語"
00010402 = "ブルガリア語 (ラテン)"
00001009 = "英語 (カナダ マルチリンガル)"
00000C0C = "フランス語 (カナダ)"
00010C0C = "フランス語 (カナダ マルチリンガル)"
0000041a = "クロアチア語"
00000405 = "チェコ語"
00010405 = "チェコ語 (QWERTY)"
00000406 = "デンマーク語"
00000413 = "オランダ語"
00000425 = "エストニア語"
0000040B = "フィンランド語"
0000040C = "フランス語"
00000407 = "ドイツ語"
00010407 = "ドイツ語 (IBM)"
00000408 = "ギリシャ語"
00050408 = "ギリシャ語 (ラテン)"
00010408 = "ギリシャ語 (220)"
00030408 = "ギリシャ語 (220) ラテン"
00020408 = "ギリシャ語 (319)"
00040408 = "ギリシャ語 (319) ラテン"
0000040E = "ハンガリー語"
0001040E = "ハンガリー語 101 キーボード"
0000040F = "アイスランド語"
00001809 = "アイルランド語"
00000410 = "イタリア語"
00010410 = "イタリア語 (142)"
0000080A = "ラテン アメリカ言語"
00000426 = "ラトビア語"
00010426 = "ラトビア語 (QWERTY)"
00000427 = "リトアニア語"
00000414 = "ノルウェー語"
00000415 = "ポーランド語 (プログラマ)"
00010415 = "ポーランド語 (214)"
00000816 = "ポルトガル語"
00000418 = "ルーマニア語"
00000419 = "ロシア語"
00010419 = "ロシア語 (タイプライタ)"
00000C1A = "セルビア語 (キリル)"
00010C1A = "セルビア語 (ラテン)"
0000041B = "スロバキア語"
0001041B = "スロバキア語 (QWERTY)"
00000424 = "スロベニア語"
0000040A = "スペイン語"
0001040A = "スペイン語 (バリエーション)"
0000041D = "スウェーデン語"
0000100C = "フランス語 (スイス)"
00000807 = "ドイツ語 (スイス)"
0001041F = "トルコ語 F"
0000041F = "トルコ語 Q"
00000422 = "ウクライナ語"
00000809 = "英語"
00000409 = "米国"
00010409 = "米国 - Dvorak"
00030409 = "米国 - Dvorak 左手用"
00040409 = "米国 - Dvorak 右手用"
00020409 = "米国 - インターナショナル"
[DiskDrivers]
dmboot = "Dynamic Volume Support (dmboot)"
i2omgmt = "Intelligent I/O Support Driver"
[InputDevicesSupport]
usbehci = "Enhanced Host Controller",files.usbehci,usbehci
usbohci = "Open Host Controller",files.usbohci,usbohci
usbuhci = "Universal Host Controller",files.usbuhci,usbuhci
usbhub = "Generic USB Hub Driver",files.usbhub,usbhub
hidusb = "Human Interface Parser",files.hidusb,hidusb
serial = "Serial Port Driver",files.none,serial
serenum = "Serial Port Enumerator",files.none,serenum
usbstor = "USB Storage Class Driver",files.usbstor,usbstor
usbccgp = "USB Generic Parent Driver",files.usbccgp,usbccgp
[SCSI]
@i:sparrow = "Adaptec AHA-151X/AHA-152X/AIC-6X60 SCSI Adapter"
@i:aha154x = "Adaptec AHA-154X/AHA-164X SCSI Host Adapter"
aic78xx = "Adaptec AHA-294X/AHA-394X/AIC-78XX SCSI Controller"
aic78u2 = "Adaptec AHA-294XU2/AIC-7890 SCSI Controller"
adpu160m = "Adaptec AIC-789X/AHA-3960 Ultra160 PCI SCSI Card"
afcnt = "Agilent HHBA-510x PCI Fibre Channel Controller"
dpti2o = "Adaptec 2000S/3000S Ultra160 SCSI RAID Controller"
afc9xxx = "Adaptec AFC-9210G PCI 64-bit/66MHz Fibre Channel 2Gbit Controller"
@i:asc3550 = "Advansys 3550 Ultra Wide SCSI Host Adapter"
@i:asc3350p = "Advansys ABP460 PCMCIA SCSI Host Adapter"
@i:abp480n5 = "Advansys ABP480 CardBus SCSI Host Adapter"
@i:asc = "Advansys SCSI Host Adapter"
@i:amsint = "AMD PCI SCSI Controller/Ethernet Adapter"
mraid35x = "AMI MegaRaid RAID Controller"
@i:cpqarray = "Compaq Drive Array"
cpqfcalm = "Compaq Fibre Channel Host Controller"
cpqarry2 = "Compaq Smart Array Controller"
cpqcissm = "Compaq Smart Array 5300 Controller"
lp6nds35 = "Emulex LP6000 Fibre Channel Host Adapters"
@i:cd20xrnt = "IBM Portable PCMCIA CD-ROM Drive"
@i:ipsraidn = "IBM ServeRAID Adapter"
nfrd960 = "IBM ServeRAID Adapter"
@i:i2omp = "Intelligent I/O Controller"
atapi = "IDE CD-ROM (ATAPI 1.2)/PCI IDE Controller"
cbidf2k = "CardBus/PCMCIA IDE Miniport Driver"
@i:ini910u = "Initio Ultra SCSI Host Adapter"
dac2w2k = "Mylex EXR2000,3000/AR160,170,352 Raid Controllers"
dac960nt = "Mylex DAC960/Digital SWXCR-Ex Raid Controller"
@i:ultra = "Promise Technology Inc. Ultra IDE Controller"
ql1240 = "QLogic ISP 1240 SCSI Host Adapter"
ql10wnt = "QLogic PCI SCSI Host Adapter"
ql1080 = "Qlogic QLA1080, 64 bit PCI LVD SCSI HBA"
ql1280 = "Qlogic QLA1280, 64 bit PCI LVD SCSI HBA"
ql12160 = "QLogic QLA12160, 64 bit PCI DUAL 160M SCSI HBA"
ql2100 = "QLogic QLA2000/QLA2100 PCI Fibre Channel Adapter"
ql2200 = "QLogic QLA2200 PCI Fibre Channel Adapter"
sym_hi = "LSI Logic C896 PCI SCSI Host Adapter"
sym_u3 = "LSI Logic C1010 PCI SCSI Host Adapter"
@i:symc810 = "LSI Logic C8100 PCI SCSI Host Adapter"
symc8xx = "LSI Logic C8xx PCI SCSI Host Adapter"
symmpi = "LSI Logic PCI Fibre Channel Host Adapter"
hpn = "Hewlett Packard NetRAID-4M RAID Controller"
perc2 = "Dell PERC 2/3 RAID Controller"
perc2gat = "Dell PERC 2/3 RAID Controller (Gatling)"
[BootBusExtenders]
pci = "PCI Bus Driver",files.pci,pci
acpi = "ACPI Plug & Play Bus Driver",files.acpi,acpi
isapnp = "ISA Plug & Play Bus Driver",files.isapnp,isapnp
acpiec = "ACPI Embedded Controller Driver",files.none,acpiec
ohci1394 = "IEEE 1394 Bus OHCI Compliant Port Driver",files.ohci1394,ohci1394
[BusExtenders]
pcmcia = "PCMCIA Support",files.pcmcia,pcmcia
pciide = "PCI IDE Bus Driver",files.pciide,pciide
intelide = "Intel IDE BUS Driver",files.intelide,intelide
viaide = "VIA IDE Bus Driver",files.viaide,viaide
cmdide = "CMD IDE Bus Driver",files.cmdide,cmdide
toside = "Toshiba IDE Bus Driver",files.toside,toside
aliide = "ALI IDE Bus Driver",files.aliide,aliide
mountmgr = "Mount Point Manager",files.none,mountmgr
ftdisk = "Volume Manager",files.none,ftdisk
partmgr = "Partition Manager",files.none,partmgr
fdc = "Floppy Drive Support",files.none,fdc
dmload = "Dynamic Volume Support (dmload)",files.none,dmload
dmio = "Dynamic Volume Support (dmio)",files.none,dmio
sbp2port = "IEEE 1394 SBP2 Storage Port Driver", files.sbp2port,sbp2port
@i:lbrtfdc = "TOSHIBA Floppy Driver (Libretto Type A)",files.lbrtfdc,lbrtfdc
[Computer]
@i:acpiapic_mp = "ACPI Multiprocessor PC",files.none
@i:acpiapic_up = "ACPI Uniprocessor PC",files.none
@i:acpipic_up = "Advanced Configuration and Power Interface (ACPI) PC",files.none
@i:syspro_mp = "Compaq SystemPro Multiprocessor or 100% Compatible",files.none
@i:mps_up = "MPS Uniprocessor PC",files.none
@i:mps_mp = "MPS Multiprocessor PC",files.none
@i:e_isa_up = "Standard PC",files.none
@i:486c_up = "Standard PC with C-Step i486",files.none
@m:acpipic_up = "ACPI UniProcessor ia64",files.none
@m:acpipic_mp = "ACPI Multiprocessor ia64",files.none
[Display]
@i:forcevga = "Standard VGA (640x480, 16 colors)",files.none
@i:vga = "自動検出",files.none
@@!i:vga = "VGA Compatible",files.none
@i:sglfb = "Cobalt",files.sglfb
[Mouse]
@i:msps2 = "Microsoft Mouse Port Mouse (includes BallPoint)",files.i8042,i8042prt
@i:lgps2 = "Logitech Mouse Port Mouse",files.i8042,i8042prt
@i:msinp = "Microsoft InPort Bus Mouse",files.inport,inport
@i:msbpser = "Microsoft BallPoint Serial Mouse",files.sermouse,sermouse
@i:lgser = "Logitech Serial Mouse",files.sermouse,sermouse
@@:none = "マウスなし、またはほかのポインティング デバイス",files.none,""
@@:mouhid = "USB マウス",files.mouhid,mouhid
@@:msser = "Microsoft シリアル マウス",files.sermouse,sermouse
@@:ps2 = "マウス ポート マウス",files.i8042,i8042prt
@@:sermouse = "シリアル マウス",files.sermouse,sermouse
@i:USB = "USB マウス",files.mouhid,mouhid
@*: COMPAT: we purposely put two strings section in txtsetup.sif
@*: The problem is that setupapi only reads strings from the first
@*: strings section it encounters. Since older versions of the OS
@*: accidentally had multiple Strings sections in the past, we make
@*: Whistler have multiple strings sections so that older applications
@*: (like win2k risetup) can read this file without requiring any change
@*: The only string that risetup specifically cares about is whatever
@*: LoadIdentifier points at, so you can probably safely add new strings
@*: to this section.
@*:
@*:
@*: The first strings section comes another one of the files that
@*: builds txtsetup.sif
[Strings]
@@!m:@w!p:wks_id = "Microsoft Windows XP Professional"
@m:@w!p:wks_id = "Microsoft Windows XP 64-Bit Edition"
@@:@p:wks_id = "Microsoft Windows XP Home Edition"
@@:@s!e!b:srv_id = "Microsoft Windows 2002 Server"
@@:@e!d:srv_id = "Microsoft Windows 2002 Advanced Server"
@@:@d:srv_id = "Microsoft Windows 2002 Datacenter Server"
@@:@b:srv_id = "Microsoft Windows 2002 Blade Server"
@@!m:@w!p:wks_id_vga = "Microsoft Windows XP Professional [VGA mode]"
@m:@w!p:wks_id_vga = "Microsoft Windows XP 64-Bit Edition [VGA mode]"
@@:@p:wks_id_vga = "Microsoft Windows XP Home Edition [VGA mode]"
@@:@s!e!b:srv_id_vga = "Microsoft Windows 2002 Server [VGA mode]"
@@:@e!d:srv_id_vga = "Microsoft Windows 2002 Advanced Server [VGA mode]"
@@:@d:srv_id_vga = "Microsoft Windows 2002 Datacenter Server [VGA mode]"
@@:@b:srv_id_vga = "Microsoft Windows 2002 Blade Server [VGA mode]"
cancel_id = "Cancel Windows XP Setup"
9x_id = "Microsoft Windows"