Commit Graph

795 Commits

Author SHA1 Message Date
topjohnwu
aa8b23105f Modernize resetprop with fancy C++ 2020-05-07 06:08:30 -07:00
topjohnwu
c113f854a2 Fix overlay.d on SAR again 2020-05-07 02:30:43 -07:00
topjohnwu
87de0e7a0e Force remove AVB for 2SI since it may bootloop some devices 2020-05-05 03:29:36 -07:00
topjohnwu
02dc1172be Revert DTB patches to in-place binary patches
Since we no longer need to add new properties in the device tree, and
all the patches we do removes strings, we can just directly patch
the flat device tree in-place, ignoring basically all the higher level
DTB structure and format to accomplish 100% compatibility.
2020-05-05 01:03:09 -07:00
topjohnwu
dbf8c41209 Force init to load fstab from file in 2SI
Patching DTBs is proven to be difficult and problematic as there are
tons of different formats out there. Adding support for all the formats
in magiskboot has been quite an headache in the past year, and it still
definitely does not cover all possible cases of them out there.

There is another issue: fake dt fstabs. Some super old devices do not
have device trees in their boot images, so some custom ROM developers
had came up with a "genius" solution: hardcode fstab entries directly
in the kernel source code and create fake device tree nodes even if
Android 10+ init can graciously take fstab files instead (-_-) 。。。

And there is YET another issue: DTBs are not always in boot images!
Google is crazy enough to litter DTBs all over the place, it is like
they cannot make up their minds (duh). This means the dt fstabs can be
either concatnated after the kernel (1), in the DTB partition (2), in
the DTBO partition (3), in the recovery_dtbo section in boot images (4),
or in the dtb section in boot images (5). FIVE f**king places, how can
anyone keep up with that!

With Android 10+ that uses 2 stage inits, it is crutual for Magisk to
be able to modify fstab mount points in order to let the original init
mount partitions for us, but NOT switch root and continue booting. For
devices using dt for early mount fstab, we used to patch the DTB at
install time with magiskboot. However these changes are permanent and
cannot be restored back at reinstallation.

With this commit, Magisk will read dt fstabs and write them to ramdisk
at boot time. And in that case, the init binary will also be patched
to force it to NEVER use fstabs in device-tree. By doing so, we can
unify ramdisk based 2SI fstab patching as basically we are just patching
fstab files. This also means we can manipulate fstab whatever Magisk
needs in the future without the need to going through the headache that
is patching DTBs at installation.
2020-05-04 02:21:51 -07:00
topjohnwu
8c4fd759c6 Strip Huawei specific logic
Users should manually switch to recovery mode instead
2020-05-03 23:07:40 -07:00
topjohnwu
0c99c4d93f More complete support for fstab in dt 2020-05-03 22:49:54 -07:00
topjohnwu
8ab045331b Workaround realpath FORTIFY crashes 2020-05-03 22:11:39 -07:00
topjohnwu
a8d0936e04 Update BusyBox 2020-05-02 03:42:42 -07:00
topjohnwu
4e349acb50 Build libselinux without ANDROID defined 2020-05-01 00:45:23 -07:00
topjohnwu
947e3b06b4 Use template to get lambda for RAII 2020-04-30 01:27:48 -07:00
topjohnwu
5fd574a14f Fix --remove-modules command 2020-04-30 01:27:48 -07:00
topjohnwu
c7ed0ef5eb Fix SAR support for overlay.d 2020-04-25 23:19:36 -07:00
topjohnwu
15f155100c Rewrite skel_node mounting and construction logic
Close #2725
2020-04-24 02:07:46 -07:00
topjohnwu
2468f5a6c4 Fix custom sepolicy patches 2020-04-22 23:01:11 -07:00
topjohnwu
945a52a99f Handle extremely rare edge case 2020-04-22 05:07:50 -07:00
topjohnwu
486b2c82a7 Disable kmsg rate limiting 2020-04-22 05:07:50 -07:00
topjohnwu
8ca5a048d6 Support system_ext 2020-04-20 23:57:29 -07:00
topjohnwu
554ebe7206 Skel dest could not exist
Close #2713
2020-04-20 22:04:57 -07:00
vvb2060
d7b87fcb8e Add untrusted_app_29 for Android 11 2020-04-20 21:50:52 -07:00
topjohnwu
c94f9e1cc9 Use a binary that exists on all devices for hijacking 2020-04-20 04:41:11 -07:00
topjohnwu
e219867cdf Hijack another binary for 2nd stage
Instead of using ptrace hacks, use another hack instead :D
2020-04-19 22:15:12 -07:00
topjohnwu
765d5d9729 Small magiskinit cleanup 2020-04-19 04:57:18 -07:00
topjohnwu
43029f37b1 Cleanup our tracks 2020-04-19 04:57:18 -07:00
topjohnwu
dfbd1305b3 Android 11 support 🎉 2020-04-19 02:47:22 -07:00
topjohnwu
c9255ab31b Remove legacy migration
It has been quite a long time ago...
2020-04-18 23:46:56 -07:00
topjohnwu
1e714af3cf Support MagiskHide when /sbin does not exist 2020-04-18 23:45:00 -07:00
topjohnwu
4c959cd983 Support cases when /sbin does not exist 2020-04-18 23:19:19 -07:00
topjohnwu
d959c35723 Make cleaner mount info 2020-04-18 18:50:25 -07:00
topjohnwu
69a9d7485b Support injecting magisk bins 2020-04-18 05:15:59 -07:00
topjohnwu
dcf07ad8c7 Directly filter '.' and '..' in xreaddir 2020-04-18 04:20:21 -07:00
topjohnwu
ed6cdb2eb4 Rename file 2020-04-18 04:10:19 -07:00
topjohnwu
a73e7e9f99 Introduce new module mount implementation
Rewrite the whole module mounting logic from scratch.
Even the algorithm is different compared to the old one.

This new design focuses on a few key points:
- Modular: Custom nodes can be injected into the mount tree.
  It's the main reason for starting the rewrite (needed for Android 11)
- Efficient: Compared to the existing implementation, this is the most
  efficient (both in terms of computation and memory usage) design I
  currently can come up with.
- Accurate: The old mounting logic relies on handling specifically every
  edge case I can think of. During this rewrite I actually found some
  cases that the old design does not handle properly. This new design is
  architected in a way (node types and its rankings) that it should
  handle edge cases all by itself when constructing mount trees.
2020-04-18 02:00:48 -07:00
topjohnwu
ab853e1fcf Update dir traversal code 2020-04-12 13:38:57 -07:00
topjohnwu
e0a281583d Preparation for dynamic tmpfs path 2020-04-12 05:34:56 -07:00
topjohnwu
d739dcac2b Remove dependency on magisk.hpp in libutils 2020-04-11 04:40:40 -07:00
topjohnwu
cdd4cb8ec2 Update BusyBox to build on latest NDK 2020-04-11 04:05:58 -07:00
topjohnwu
93ef90cd24 Fix FORTIFY crashes 2020-04-11 04:05:34 -07:00
topjohnwu
4066e5bf14 Update Makefiles 2020-04-06 22:45:08 -07:00
topjohnwu
67d746a62c Let build.py setup NDK 2020-04-03 03:34:07 -07:00
topjohnwu
2f1f68f12f Prepare compilation for NDK r21 2020-04-03 02:58:39 -07:00
Shaka Huang
834561a5de Content in dt_fstab is not null terminated in emulator
Value of <dt>/fstab/<partition>/dev and <dt>/fstab/<partition>/type in official Android emulator ends with newline instead of \0, Magisk won’t be able to patch sepolicy and crash the system.

Signed-off-by: Shaka Huang <shakalaca@gmail.com>
2020-04-02 20:54:41 -07:00
topjohnwu
9820296e92 Update files.cpp in libutils 2020-04-02 02:17:45 -07:00
topjohnwu
dbfde74c1e Clean rootfs in switch_root 2020-04-01 23:37:11 -07:00
topjohnwu
b28668e18d Prevent possible race condition 2020-04-01 22:40:59 -07:00
topjohnwu
5f1174de27 Introduce new boot flow to handle SAR 2SI
The existing method for handling legacy SAR is:
1. Mount /sbin tmpfs overlay
2. Dump all patched/new files into /sbin
3. Magic mount root dir and re-exec patched stock init

With Android 11 removing the /sbin folder, it is quite obvious that
things completely break down right in step 1.

To overcome this issue, we have to find a way to swap out the init
binary AFTER we re-exec stock init. This is where 2SI comes to rescue!

2SI normal boot procedure is:
1st stage -> Load sepolicy -> 2nd stage -> boot continue...

2SI Magisk boot procedure is:
MagiskInit 1st stage -> Stock 1st stage -> MagiskInit 2nd Stage ->
-> Stock init load sepolicy -> Stock 2nd stage -> boot continue...

As you can see, the trick is to make stock 1st stage init re-exec back
into MagiskInit so we can do our setup. This is possible by manipulating
some ramdisk files on initramfs based 2SI devices (old ass non SAR
devices AND super modern devices like Pixel 3/4), but not possible
on device that are stuck using legacy SAR (device that are not that
modern but not too old, like Pixel 1/2. Fucking Google logic!!)

This commit introduces a new way to intercept stock init re-exec flow:
ptrace init with forked tracer, monitor PTRACE_EVENT_EXEC, then swap
out the init file with bind mounts right before execv returns!

Going through this flow however will lose some necessary backup files,
so some bookkeeping has to be done by making the tracer hold these
files in memory and act as a daemon. 2nd stage MagiskInit will ack the
daemon to release these files at the correct time.

It just works™  ¯\_(ツ)_/¯
2020-04-01 04:39:28 -07:00
topjohnwu
543ce937ec Don't need to find system_dev 2020-03-31 22:41:25 -07:00
Chris Renshaw
aa72a080b0 core: clean up /data/adb/magisk.img, etc. as well
- now that magisk.img -> /data/adb/modules migration is no longer taking place make sure all magisk.img locations get cleaned up
2020-03-26 03:39:49 -07:00
topjohnwu
ba7cb47383 Make version reporting consistent 2020-03-23 01:17:13 -07:00
topjohnwu
48d417f9af Add symlink for backwards compatibility
The native code has to run with an old verison of Magisk Manager,
add this back so things will work properly.
2020-03-22 21:00:40 -07:00
Zackptg5
d7cd1b37f8 add missing flags 2020-03-22 13:41:55 -07:00
Simon Shi
7768274b2f Fix build issue 2020-03-14 11:17:51 -07:00
topjohnwu
612b51d48f Disable MagiskHide by default
Since SafetyNet CTS is impossible to achieve, leaving MagiskHide on
by default no longer serves a purpose.

For more details regarding the latest SafetyNet changes, please check:
https://twitter.com/topjohnwu/status/1237656703929180160
https://twitter.com/topjohnwu/status/1237830555523149824

MagiskHide's functionality will continue to exist within the Magisk
project as it is still extremely effective to hide modifications in
userspace (including SafetyNet's basicIntegrity check).

Future MagiskHide improvements _may_ come, but since the holy grail
has been taken, any form of improvement is now a very low priority.
2020-03-13 01:48:14 -07:00
Fox2Code
c07775f5e3
Add missing ro.vendor(.boot).warranty_bit props
Co-authored-by: John Wu <topjohnwu@gmail.com>
2020-03-12 00:28:43 -07:00
topjohnwu
e261579e72 Use standalone mode in boot scripts 2020-03-11 00:11:15 -07:00
topjohnwu
cf54cad3ce deleteprop -> delprop 2020-03-09 02:05:24 -07:00
topjohnwu
a0998009c1 Small native code reorganization 2020-03-09 01:50:30 -07:00
YU-YEN HSU
df15606b00 prop compare fix 2020-03-08 22:58:37 -07:00
YU-YEN HSU
4dc0d13688 Xiaomi cross region flash hacks 2020-03-08 22:58:37 -07:00
topjohnwu
ee1f45aa91 Add new commandline option to get tmpfs root 2020-02-29 15:33:11 -08:00
topjohnwu
696ab677be New pre-init magic mount implementation 2020-02-21 00:49:58 -08:00
topjohnwu
0d229dac3b Support Android 11 SELinux paths
This is NOT proper Android 11 support
2020-02-21 00:49:33 -08:00
topjohnwu
3b8ea599f0 Fix switch_root implementation 2020-02-20 21:08:59 -08:00
topjohnwu
e5f50bb7e0 Update busybox 2020-02-07 21:57:26 -08:00
topjohnwu
84e4bd3d41 Move readlinkat fix into xwrap 2020-02-03 13:24:02 +08:00
Shaka Huang
0ecfb63cd6 Fix crash during boot in x86 platform
readlinkat() may return random value instead of the number of bytes placed in buf and crashing the system in two ways:
1. segmentation fault (buf[-7633350] = ‘\0’)
2. wrong link of watchdogd, resulting dog timeout

Confirmed working in ZenFone 2 x86 series, may fix #2247 and #2356

Signed-off-by: Shaka Huang <shakalaca@gmail.com>
2020-02-03 13:02:30 +08:00
topjohnwu
ebdd6ec40c Fallback to getprop to get SDK_INT
Close #2274, close #2279
2020-02-03 12:58:59 +08:00
topjohnwu
6180558068 Add support for genfscon sepolicy rules
Close #2367
2020-02-02 01:16:42 +08:00
Shaka Huang
cf589f8c64
Fix error loading libsqlite.so
Vendors are always adding “extra libraries” in /vendor/lib* for their own sake, in this case AS*S loaded with customized `libicuuc.so` for Zenf*ne 5z and led to the failure of dynamic loading libsqlite.so:

<quote>
db: dlopen failed: cannot locate symbol "UCNV_FROM_U_CALLBACK_ESCAPE_63" referenced by "/apex/com.android.runtime/lib64/libandroidicu.so"...
</quote>

Signed-off-by: Shaka Huang <shakalaca@gmail.com>

* Minor optimizations

Co-authored-by: John Wu <topjohnwu@gmail.com>
2020-02-01 14:36:34 +08:00
topjohnwu
e864919c0b Jellybean supports modules 2020-02-01 14:22:31 +08:00
osm0sis
a7435dad6d magiskboot: fix lzop detection 2020-02-01 01:09:12 +08:00
osm0sis
793f0b605c init: fix Tegra "APP" /system partition mounting
- thanks rootfan in https://github.com/topjohnwu/Magisk/issues/2063#issuecomment-573232567

Closes #2243
2020-02-01 01:09:12 +08:00
topjohnwu
5b56ca7ffc Use MAX_FDT_GROWTH instead of hardcode value 2020-02-01 00:58:33 +08:00
topjohnwu
5c988510b3 Preserve fdt paddings
Some Motorola devices (Qualcomm kernel with CONFIG_MMI_DEVICE_DTBS
configuration enabled) need 1k of padding to the DTBs to allow for
environment variables to be runtime added by the bootloader.
Those extra paddings will be removed during the process of dtb patch,
devices won’t be able to boot-up and return to fastboot mode immediately
after flashed the flawed boot.img.

Credits to @shakalaca, close #2273
2020-02-01 00:48:21 +08:00
topjohnwu
290624844b Reorganize dtb code 2020-02-01 00:15:52 +08:00
topjohnwu
e395c9442f Upstream system_properties 2020-01-27 19:50:03 +08:00
vvb2060
b90c65370e Fix build on Windows 2020-01-26 12:27:07 +08:00
topjohnwu
ba55e2bc32 Backup proper magiskinit in A-only 2SI 2020-01-22 05:12:04 +08:00
topjohnwu
0a2c99f1dc Use __LP64__ to detect 64 bit 2020-01-22 01:20:14 +08:00
topjohnwu
836bfbdd02 Wrapper is no longer needed 2020-01-22 01:17:30 +08:00
topjohnwu
b13a35057a Support building standalone resetprop 2020-01-21 00:48:52 +08:00
topjohnwu
c3e77b1ec1 Add BusyBox SELinux support
Close #1523
2020-01-20 20:48:05 +08:00
topjohnwu
fb60bea659 Update external/selinux 2020-01-20 18:36:16 +08:00
topjohnwu
b39f407596 Load libsqlite dynamically 2020-01-11 03:20:59 +08:00
osm0sis
615ad0cc5a core: remove remaining legacy workarounds/leftovers 2020-01-10 23:31:43 +08:00
topjohnwu
3a0e3c98f7 Minor adjustments to prevent crashes 2020-01-09 23:42:27 +08:00
topjohnwu
fafa92d44b Simplify rootfs persist mount 2020-01-08 22:42:54 +08:00
topjohnwu
242e64d72f Make write return something sane 2020-01-06 17:09:09 +08:00
topjohnwu
2262af728e Eliminate undefined behavior 2020-01-06 05:31:38 +08:00
topjohnwu
2db1e5cb74 Minor module related fixes 2019-12-30 13:21:39 +08:00
topjohnwu
78c64d39ec Add split command to magiskboot
Allow splitting image.*-dtb files to kernel and dtb
2019-12-30 13:04:39 +08:00
topjohnwu
b2cb2b8b75 Reduce socket name length
Some detectors simply ban long abstract sockets
2019-12-28 21:27:55 +08:00
Zackptg5
d19f65ce4a Ignore twrp fstabs 2019-12-28 13:47:05 +08:00
topjohnwu
3beffd84d6 Copy sepolicy rules to persist every boot 2019-12-22 03:44:07 -05:00
topjohnwu
3b9f7885e0 Stop using chdir 2019-12-21 05:29:38 -05:00
topjohnwu
7668e45890 Cleanup legacy code 2019-12-17 17:15:31 -05:00
topjohnwu
695c8bc5d0 Detect package name for copying binaries
Close #2152
2019-12-17 16:38:12 -05:00
topjohnwu
4f4f54a059 Remove unused code 2019-12-13 08:31:24 -05:00
topjohnwu
12fda29280 Add support for pre-init custom sepolicy patches
Close #1685
2019-12-13 06:05:12 -05:00
topjohnwu
af060b3132 General QoL changes 2019-12-13 00:37:06 -05:00