Commit Graph

88 Commits

Author SHA1 Message Date
topjohnwu
d4baae411b Modernize magiskpolicy 2020-05-21 06:48:02 -07:00
topjohnwu
e02e46d0fc Detect volume down key combo for safe mode
It is possible that a module is breaking the device so bad that zygote
cannot even be started. In this case, system_server cannot start and
detect the safe mode key combo, set the persist property, and reboot.

Also on old Android versions, the system directly goes to safe mode
after detecting a key combo without rebooting, defeating the purpose of
Magisk's safe mode protection if we only check for the persist property.

Directly adding key combo check natively in magiskd allows us to enter
Magisk safe mode before the system is even aware of it.
2020-05-19 04:57:47 -07:00
topjohnwu
f7d3d1eeaf Increase post-fs-data mode to 40 secs 2020-05-18 04:56:51 -07:00
topjohnwu
c113f854a2 Fix overlay.d on SAR again 2020-05-07 02:30:43 -07:00
topjohnwu
87de0e7a0e Force remove AVB for 2SI since it may bootloop some devices 2020-05-05 03:29:36 -07:00
topjohnwu
dbf8c41209 Force init to load fstab from file in 2SI
Patching DTBs is proven to be difficult and problematic as there are
tons of different formats out there. Adding support for all the formats
in magiskboot has been quite an headache in the past year, and it still
definitely does not cover all possible cases of them out there.

There is another issue: fake dt fstabs. Some super old devices do not
have device trees in their boot images, so some custom ROM developers
had came up with a "genius" solution: hardcode fstab entries directly
in the kernel source code and create fake device tree nodes even if
Android 10+ init can graciously take fstab files instead (-_-) 。。。

And there is YET another issue: DTBs are not always in boot images!
Google is crazy enough to litter DTBs all over the place, it is like
they cannot make up their minds (duh). This means the dt fstabs can be
either concatnated after the kernel (1), in the DTB partition (2), in
the DTBO partition (3), in the recovery_dtbo section in boot images (4),
or in the dtb section in boot images (5). FIVE f**king places, how can
anyone keep up with that!

With Android 10+ that uses 2 stage inits, it is crutual for Magisk to
be able to modify fstab mount points in order to let the original init
mount partitions for us, but NOT switch root and continue booting. For
devices using dt for early mount fstab, we used to patch the DTB at
install time with magiskboot. However these changes are permanent and
cannot be restored back at reinstallation.

With this commit, Magisk will read dt fstabs and write them to ramdisk
at boot time. And in that case, the init binary will also be patched
to force it to NEVER use fstabs in device-tree. By doing so, we can
unify ramdisk based 2SI fstab patching as basically we are just patching
fstab files. This also means we can manipulate fstab whatever Magisk
needs in the future without the need to going through the headache that
is patching DTBs at installation.
2020-05-04 02:21:51 -07:00
topjohnwu
8c4fd759c6 Strip Huawei specific logic
Users should manually switch to recovery mode instead
2020-05-03 23:07:40 -07:00
topjohnwu
0c99c4d93f More complete support for fstab in dt 2020-05-03 22:49:54 -07:00
topjohnwu
c7ed0ef5eb Fix SAR support for overlay.d 2020-04-25 23:19:36 -07:00
topjohnwu
2468f5a6c4 Fix custom sepolicy patches 2020-04-22 23:01:11 -07:00
topjohnwu
486b2c82a7 Disable kmsg rate limiting 2020-04-22 05:07:50 -07:00
topjohnwu
c94f9e1cc9 Use a binary that exists on all devices for hijacking 2020-04-20 04:41:11 -07:00
topjohnwu
e219867cdf Hijack another binary for 2nd stage
Instead of using ptrace hacks, use another hack instead :D
2020-04-19 22:15:12 -07:00
topjohnwu
765d5d9729 Small magiskinit cleanup 2020-04-19 04:57:18 -07:00
topjohnwu
dfbd1305b3 Android 11 support 🎉 2020-04-19 02:47:22 -07:00
topjohnwu
4c959cd983 Support cases when /sbin does not exist 2020-04-18 23:19:19 -07:00
topjohnwu
d959c35723 Make cleaner mount info 2020-04-18 18:50:25 -07:00
topjohnwu
69a9d7485b Support injecting magisk bins 2020-04-18 05:15:59 -07:00
topjohnwu
dcf07ad8c7 Directly filter '.' and '..' in xreaddir 2020-04-18 04:20:21 -07:00
topjohnwu
e0a281583d Preparation for dynamic tmpfs path 2020-04-12 05:34:56 -07:00
topjohnwu
2f1f68f12f Prepare compilation for NDK r21 2020-04-03 02:58:39 -07:00
Shaka Huang
834561a5de Content in dt_fstab is not null terminated in emulator
Value of <dt>/fstab/<partition>/dev and <dt>/fstab/<partition>/type in official Android emulator ends with newline instead of \0, Magisk won’t be able to patch sepolicy and crash the system.

Signed-off-by: Shaka Huang <shakalaca@gmail.com>
2020-04-02 20:54:41 -07:00
topjohnwu
9820296e92 Update files.cpp in libutils 2020-04-02 02:17:45 -07:00
topjohnwu
dbfde74c1e Clean rootfs in switch_root 2020-04-01 23:37:11 -07:00
topjohnwu
b28668e18d Prevent possible race condition 2020-04-01 22:40:59 -07:00
topjohnwu
5f1174de27 Introduce new boot flow to handle SAR 2SI
The existing method for handling legacy SAR is:
1. Mount /sbin tmpfs overlay
2. Dump all patched/new files into /sbin
3. Magic mount root dir and re-exec patched stock init

With Android 11 removing the /sbin folder, it is quite obvious that
things completely break down right in step 1.

To overcome this issue, we have to find a way to swap out the init
binary AFTER we re-exec stock init. This is where 2SI comes to rescue!

2SI normal boot procedure is:
1st stage -> Load sepolicy -> 2nd stage -> boot continue...

2SI Magisk boot procedure is:
MagiskInit 1st stage -> Stock 1st stage -> MagiskInit 2nd Stage ->
-> Stock init load sepolicy -> Stock 2nd stage -> boot continue...

As you can see, the trick is to make stock 1st stage init re-exec back
into MagiskInit so we can do our setup. This is possible by manipulating
some ramdisk files on initramfs based 2SI devices (old ass non SAR
devices AND super modern devices like Pixel 3/4), but not possible
on device that are stuck using legacy SAR (device that are not that
modern but not too old, like Pixel 1/2. Fucking Google logic!!)

This commit introduces a new way to intercept stock init re-exec flow:
ptrace init with forked tracer, monitor PTRACE_EVENT_EXEC, then swap
out the init file with bind mounts right before execv returns!

Going through this flow however will lose some necessary backup files,
so some bookkeeping has to be done by making the tracer hold these
files in memory and act as a daemon. 2nd stage MagiskInit will ack the
daemon to release these files at the correct time.

It just works™  ¯\_(ツ)_/¯
2020-04-01 04:39:28 -07:00
topjohnwu
543ce937ec Don't need to find system_dev 2020-03-31 22:41:25 -07:00
topjohnwu
a0998009c1 Small native code reorganization 2020-03-09 01:50:30 -07:00
topjohnwu
696ab677be New pre-init magic mount implementation 2020-02-21 00:49:58 -08:00
topjohnwu
3b8ea599f0 Fix switch_root implementation 2020-02-20 21:08:59 -08:00
topjohnwu
84e4bd3d41 Move readlinkat fix into xwrap 2020-02-03 13:24:02 +08:00
Shaka Huang
0ecfb63cd6 Fix crash during boot in x86 platform
readlinkat() may return random value instead of the number of bytes placed in buf and crashing the system in two ways:
1. segmentation fault (buf[-7633350] = ‘\0’)
2. wrong link of watchdogd, resulting dog timeout

Confirmed working in ZenFone 2 x86 series, may fix #2247 and #2356

Signed-off-by: Shaka Huang <shakalaca@gmail.com>
2020-02-03 13:02:30 +08:00
osm0sis
793f0b605c init: fix Tegra "APP" /system partition mounting
- thanks rootfan in https://github.com/topjohnwu/Magisk/issues/2063#issuecomment-573232567

Closes #2243
2020-02-01 01:09:12 +08:00
topjohnwu
ba55e2bc32 Backup proper magiskinit in A-only 2SI 2020-01-22 05:12:04 +08:00
topjohnwu
b39f407596 Load libsqlite dynamically 2020-01-11 03:20:59 +08:00
topjohnwu
3a0e3c98f7 Minor adjustments to prevent crashes 2020-01-09 23:42:27 +08:00
topjohnwu
fafa92d44b Simplify rootfs persist mount 2020-01-08 22:42:54 +08:00
topjohnwu
b2cb2b8b75 Reduce socket name length
Some detectors simply ban long abstract sockets
2019-12-28 21:27:55 +08:00
topjohnwu
4f4f54a059 Remove unused code 2019-12-13 08:31:24 -05:00
topjohnwu
12fda29280 Add support for pre-init custom sepolicy patches
Close #1685
2019-12-13 06:05:12 -05:00
topjohnwu
af060b3132 General QoL changes 2019-12-13 00:37:06 -05:00
topjohnwu
8c500709e4 Remove SAR compatibility mode 2019-12-12 03:25:48 -05:00
topjohnwu
08177c3dd8 Mount persist partition mirror pre-init 2019-12-09 04:09:23 -05:00
topjohnwu
d22b9c26b6 Pull out common logic 2019-12-06 15:31:49 -05:00
topjohnwu
4bb8ad19cf Small init refactoring 2019-12-06 12:02:34 -05:00
topjohnwu
476b61c4c9 Support system_root with NVIDIA partition names
Fix #2063
2019-12-05 17:20:32 -05:00
topjohnwu
8cc5f096a2 Some minor changes 2019-12-05 17:20:32 -05:00
topjohnwu
276535dad6 Fix incorrect kmsg path
/proc/kmsg -> /dev/kmsg
2019-11-25 19:09:02 -05:00
topjohnwu
7681fde4d0 Record mounts to be cleaned up in a vector 2019-11-19 00:16:20 -05:00
topjohnwu
d3b7b41927 Fix kmsg logging in magiskinit 2019-11-18 17:18:56 -05:00