Commit Graph

905 Commits

Author SHA1 Message Date
Aron Wieck
da86b85a28 Make NativeLibraryLoader check java.library.path first
Motivation:

On restricted systems (e.g. grsecurity), it might not be possible to write a .so on disk and load it afterwards. On those system Netty should check java.library.path for libraries to load.

Modifications:

Changed NativeLibraryLoader.java to first try to load libs from java.library.path before exporting the .so to disk.

Result:

Libraries load fine on restricted systems.
2017-08-16 14:27:50 -07:00
Derek Perez
3469004432 Adding explicit comment about case statement
Motivation:

When compiling this code and running it through errorprone[1], this message appears:
```
StringUtil.java:493: error: [FallThrough] Switch case may fall through; add a `// fall through` comment if it was deliberate
                    case LINE_FEED:
                    ^
    (see http://errorprone.info/bugpattern/FallThrough)
```
By adding that comment, it silences the error and also makes clear the intention of that statement.

[1]http://errorprone.info/index

Modification:

Add simple comment.

Result:

Errorprone is happier with the code.
2017-08-16 07:38:11 +02:00
Nikolay Fedorovskikh
4875a2aad4 Immediate caching the strings wrapped to AsciiString
Motivation:
The `AsciiString#toString` method calculate string value and cache it into field. If an `AsciiString` created from the `String` value, we can avoid rebuilding strings if we cache them immediately when creating `AsciiString`. It would be useful for constants strings, which already stored in the JVMs string table, or in cases where an unavoidable `#toString `method call is assumed.

Modifications:
- Add new static method `AsciiString#cache(String)` which save string value into cache field.
- Apply a "benign" data race in the `#hashCode` and `#toString` methods.

Result:
Less memory usage in some `AsciiString` use cases.
2017-08-15 06:22:14 +02:00
Norman Maurer
19dcb15062 Use underscore in native library names for consistency.
Motivation:

At the moment we try to load the library using multiple names which includes names using - but also _ . We should just use _ all the time.

Modifications:

Replace - with _

Result:

Fixes [#7069]
2017-08-15 06:02:00 +02:00
Nikolay Fedorovskikh
e249b453a0 Make configurable the initial and max size of InternalThreadLocalMap#stringBuilder
Motivation:
In some cases of using an `InternalThreadLocalMap#stringBuilder`, the `StringBuilder`s size can often exceed the exist limit (1024 bytes). This can lead to permanent memory reallocation.

Modifications:
Add custom properties for the initial capacity and maximum size (after which the `StringBuilder`s capacity will be reduced to the initial capacity).

Result:
An `InternalThreadLocalMap#stringBuilder`s initial and max size is configurable. Fixes [#7092].
2017-08-14 13:27:58 -07:00
Norman Maurer
b30c4f899f Remove debug cruft from e218759c0c 2017-08-08 17:01:31 +02:00
Norman Maurer
e218759c0c Fix regression in detecting macOS/osx platform introduced by bdb0a39c8a 2017-08-08 10:39:22 +02:00
Norman Maurer
bdb0a39c8a Remove code-duplication from NativeLibraryLoader
Motivation:

NativeLibraryLoader has some code-duplication that can be removed.

Modifications:

Remove duplicated code and just use provided methods of PlatformDependent.

Result:

Less code duplication, fixes [#3756].
2017-08-08 09:06:41 +02:00
Scott Mitchell
a75ac747f0 Remove io.netty.packagePrefix system property
Motivation:
Now that the NativeLibraryLoader implicitly detects the shaded package prefix we no longer need the io.netty.packagePrefix system property.

Modifications:
- Remove io.netty.packagePrefix processing from NativeLibraryLoader

Result:
Code is cleaner.
2017-08-04 10:53:29 +02:00
Norman Maurer
52f384b37f [maven-release-plugin] prepare for next development iteration 2017-08-02 12:55:10 +00:00
Norman Maurer
8cc1071881 [maven-release-plugin] prepare release netty-4.1.14.Final 2017-08-02 12:54:51 +00:00
Eric Anderson
e5a31a4282 Automatically detect shaded packagePrefix
Motivation:

Shading requires renaming binary components (.so, .dll; for tcnative,
epoll, etc). But the rename then requires setting the
io.netty.packagePrefix system property on the command line or runtime,
which is either a burden or not feasible.

If you don't rename the binary components everything appears to
work, until a dependency on a second version of the binary component is
added. At that point, only one version of the binary will be loaded...
which is what shading is supposed to prevent. So for valid shading, the
binaries must be renamed.

Modifications:

Automatically detect the package prefix by comparing the actual class
name to the non-shaded expected class name. The expected class name must
be obfuscated to prevent shading utilities from changing it.

Result:

When shading and using binary components, runtime configuration is no
longer necessary.

Pre-existing shading users that were not renaming the binary components
will break, because the packagePrefix previously defaulted to "". Since
these pre-existing users had broken configurations that only _appeared_
to work, this breakage is considered a Good Thing. Users may workaround
this breakage temporarily by setting -Dio.netty.packagePrefix= to
restore packagePrefix to "".

Fixes #6963
2017-07-19 18:38:02 -07:00
louxiu
96e06aa74d Calculate correct lastRecords size
Motivation:
ResourceLeakDetector records at most MAX_RECORDS+1 records

Modifications:
Make room before add to lastRecords

Result:
ResourceLeakDetector will record at most MAX_RECORDS records
2017-07-18 19:14:31 -07:00
kashike
c43e09da5a Use the correct murmur3 C1 value
introduced in a7f7d9c8e0
2017-07-18 19:03:33 -07:00
Scott Mitchell
7cfe416182 Use unbounded queues from JCTools 2.0.2
Motivation:
JCTools 2.0.2 provides an unbounded MPSC linked queue. Before we shaded JCTools we had our own unbounded MPSC linked queue and used it in various places but gave this up because there was no public equivalent available in JCTools at the time.

Modifications:
- Use JCTool's MPSC linked queue when no upper bound is specified

Result:
Fixes https://github.com/netty/netty/issues/5951
2017-07-10 12:32:15 -07:00
Norman Maurer
2a376eeb1b [maven-release-plugin] prepare for next development iteration 2017-07-06 13:24:06 +02:00
Norman Maurer
c7f8168324 [maven-release-plugin] prepare release netty-4.1.13.Final 2017-07-06 13:23:51 +02:00
Nikolay Fedorovskikh
01eb428b39 Move methods for decode hex dump into StringUtil
Motivation:

PR #6811 introduced a public utility methods to decode hex dump and its parts, but they are not visible from netty-common.

Modifications:

1. Move the `decodeHexByte`, `decodeHexDump` and `decodeHexNibble` methods into `StringUtils`.
2. Apply these methods where applicable.
3. Remove similar methods from other locations (e.g. `HpackHex` test class).

Result:

Less code duplication.
2017-06-23 18:52:42 +02:00
Nikolay Fedorovskikh
aa38b6a769 Prevent unnecessary allocations in the StringUtil#escapeCsv
Motivation:

A `StringUtil#escapeCsv` creates new `StringBuilder` on each value even if the same string is returned in the end.

Modifications:

Create new `StringBuilder` only if it really needed. Otherwise, return the original string (or just trimmed substring).

Result:

Less GC load. Up to 4x faster work for not changed strings.
2017-06-13 14:57:38 -07:00
Scott Mitchell
1cc4607f07 AppendableCharSequence not to depend upon IndexOutOfBoundsException for resize
Motivation:
AppendableCharSequence depends upon IndexOutOfBoundsException to trigger a resize operation under the assumption that the resize operation will be rare if the initial size guess is good. However if the initial size guess is not good then the performance will be more unpredictable and likely suffer.

Modifications:
- Check the position in AppendableCharSequence#append to determine if a resize is necessary

Result:
More predictable performance in AppendableCharSequence#append.
2017-06-12 12:42:20 -07:00
Norman Maurer
fd67a2354d [maven-release-plugin] prepare for next development iteration 2017-06-08 21:06:24 +02:00
Norman Maurer
3acd5c68ea [maven-release-plugin] prepare release netty-4.1.12.Final 2017-06-08 21:06:01 +02:00
Norman Maurer
f208b147a6 Use FQCN to prevent classloader issues on java6
Motivation:

We need to use FQCN to prevent classloader issues for classes that are > Java6. This is a cleanup of ed5fcbb773.

Modifications:

Just remove the imports and use FQCN.

Result:

No classloader issues with java6
2017-06-08 12:04:17 +02:00
Michael K. Werle
ed5fcbb773 Add explicit message when noexec prevents library loading.
Motivation:

Docker's `--tmpfs` flag mounts the temp volume with `noexec` by default,
resulting in an UnsatisfiedLinkError.  While this is good security
practice, it is a surprising failure from a seemingly innocuous flag.

Modifications:

Add a best-effort attempt in `NativeLibraryLoader` to detect when temp
files beng loaded cannot be executed even when execution permissions
are set, often because the `noexec` flag is set on the volume.

Requires numerous additional exclusions to the Animal Sniffer config
for Java7 POSIX permissions manipulation.

Result:

Fixes [#6678].
2017-06-07 09:20:05 -07:00
Norman Maurer
201d9b6536 Share code that is needed to support shaded native libraries.
Motivation:

For our native libraries in netty we support shading, to have this work on runtime the user needs to set a system property. This code should shared.

Modifications:

Move logic to NativeLbiraryLoader and so share for all native libs.

Result:

Less code duplication and also will work for netty-tcnative out of the box once it support shading
2017-05-19 19:33:21 +02:00
Nikolay Fedorovskikh
d768c5e628 MessageFormatter improvements
Motivation:

`FormattingTuple.getArgArray()` is never used.
In the `MessageFormatter` it is possible to make
some improvements, e.g. replace `StringBuffer`
with `StringBuilder`, avoid redundant allocations, etc.

Modifications:

- Remove `argArray` field from the `FormattingTuple`.
- In `MessageFormatter`:
  - replace `StringBuffer` with `StringBuilder`,
  - replace `HashMap` with `HashSet` and make it lazy initialized.
  - avoid redundant allocations (`substring()`, etc.)
  - use appropriate StringBuilder's methods for the some `Number` values.
- Porting unit tests from `slf4j`.

Result:

Less GC load on logging with internal `MessageFormatter`.
2017-05-19 09:47:11 -07:00
Nikolay Fedorovskikh
e4531918a3 Optimizations in NetUtil
Motivation:

IPv4/6 validation methods use allocations, which can be avoided.
IPv4 parse method use StringTokenizer.

Modifications:

Rewriting IPv4/6 validation methods to avoid allocations.
Rewriting IPv4 parse method without use StringTokenizer.

Result:

IPv4/6 validation and IPv4 parsing faster up to 2-10x.
2017-05-18 16:42:22 -07:00
Norman Maurer
0ee49e6d66 Eliminate noisy logging when using sun.misc.Unsafe and running on pre Java9
Motivation:

We should only try to load jdk.internal.misc.Unsafe if we run on Java9+ to eliminate noise in the log.

Modifications:

- Move javaVersion() and related methods to PlatformDependent0 to be able to use these in the static initializer without creating a cycle.
- Only try to load jdk.internal.misc.Unsafe when running in Java9+

Result:

Less noise in the log when running pre java9.
2017-05-16 08:29:06 +02:00
Jason Tedor
d88cd23bfc Trim thread local string builder if large
Motivation:

A previous change allocated a new thread local string builder if it
was getting too large. This is a good change, these string builders
can accidentally get too large and then never shrunk and that is sort
of a memory leak. However, the change allocates an entirely new string
builder which is more allocations than necessary. Instead, we can trim
the string builder if its too large, this only allocates an extra
backing array instead of a whole new object.

Modifications:

If the string builder is above a threshold, we trim the string builder
and then ensure its capacity is reasonable to we do not allocate too
much as we start using the string builder.

Result:

The thread local string builder do not serve as a memory yet we do not
allocate too many new objects.
2017-05-12 08:20:04 +02:00
Norman Maurer
0db2901f4d [maven-release-plugin] prepare for next development iteration 2017-05-11 16:00:55 +02:00
Norman Maurer
f7a19d330c [maven-release-plugin] prepare release netty-4.1.11.Final 2017-05-11 16:00:16 +02:00
Nikolay Fedorovskikh
5643cc6a10 IPv6 validation fixes
Motivation:

`NetUtil`'s methods `isValidIpV6Address` and `getIPv6ByName` incorrectly validate some IPv6 addresses.

Modifications:

- `getIPv6ByName`: add checks for single colon at the start or end.
- `isValidIpV6Address`: fix checks for the count of colons and use `endOffset` instead of `ipAddress.length()` for the cases with the brackets or '%'.

Result:

More correct implementation of `NetUtil#isValidIpV6Address` and `NetUtil#getIPv6ByName`.
2017-05-11 08:10:25 -07:00
jiachun.fjc
cd80b6c2d8 Use simple volatile read for SingleThreadEventExecutor#state instead of UNSAFE(AtomicIntegerFieldUpdater#get), CAS operation still to use AtomicIntegerFieldUpdater
Motivation:

AtomicIntegerFieldUpdater#get is unnecessary, I think use simple volatile read is cleaner

Modifications:

Replace code STATE_UPDATER.get(this) to state in SingleThreadEventExecutor

Result:

Cleaner code
2017-05-08 19:36:19 +02:00
jiachun.fjc
963cd22a05 InternalThreadLocalMap#stringBuilder: ensure memory overhead
Motivation:

InternalThreadLocalMap#stringBuilder: ensure memory overhead

Modification:

If the capacity of StringBuilder is greater than 65536 then release it on the next time you get StringBuilder and re-create a StringBuilder.

Result:

Possible less memory usage.
2017-05-05 09:28:51 -07:00
Jason Tedor
02a2738cd2 Do not try to use cleaner if no unsafe
Motivation:

If unsafe is unavailable, we can not use the cleaner anyway. If we try
to set it up, we get an annoying log message about unsafe being
unavailable (when debug logging is enabled). We know this will fail, so
we should not even bother and avoid the log message.

Modifications:

This commit adds a guard against setting up the cleaner if it is not
going to be available because unsafe is unavailable.

Result:

We do not try to set up the cleaner if unsafe is unavailable, and we do
not get an annoying log message.
2017-05-03 13:36:00 -07:00
Jason Tedor
9a0fd3a7b8 Do not log on explicit no unsafe again
Motivation:

Users should not see a scary log message when Netty is initialized if
Netty configuration explicitly disables unsafe. The log message that
produces this warning was previously guarded but the guard was
lost.

Modifications:

This commit brings back the guard against the scary log message if
unsafe is explicitly disabled.

Result:

No log message is produced when unsafe is unavailable because Netty was
told to not look for it.
2017-05-03 13:29:58 -07:00
Scott Mitchell
3cc4052963 New native transport for kqueue
Motivation:
We currently don't have a native transport which supports kqueue https://www.freebsd.org/cgi/man.cgi?query=kqueue&sektion=2. This can be useful for BSD systems such as MacOS to take advantage of native features, and provide feature parity with the Linux native transport.

Modifications:
- Make a new transport-native-unix-common module with all the java classes and JNI code for generic unix items. This module will build a static library for each unix platform, and included in the dynamic libraries used for JNI (e.g. transport-native-epoll, and eventually kqueue).
- Make a new transport-native-unix-common-tests module where the tests for the transport-native-unix-common module will live. This is so each unix platform can inherit from these test and ensure they pass.
- Add a new transport-native-kqueue module which uses JNI to directly interact with kqueue

Result:
JNI support for kqueue.
Fixes https://github.com/netty/netty/issues/2448
Fixes https://github.com/netty/netty/issues/4231
2017-05-03 09:53:22 -07:00
jiachun.fjc
e58095c4f2 Simplify code
Motivation:

Code can be simplified

Modification:

Refactor code to remove extra branching

Result:

Cleaner code.
2017-05-02 15:16:19 -07:00
Vladimir Kostyukov
ed37cf20ef Introduce HashedWheelTimer.pendingTimeouts()
Motivation:

Fixes #6681.

Modification:

For the sake of better timer observability, expose the number of pending timeouts through the new HashedWheelTimer.pendingTimeouts method .

Result:

It's now ridiculously easy to observe Netty timer's very basic and yet important metric, the number of pending tasks/timeouts.
2017-05-01 20:10:22 -07:00
Norman Maurer
6915ec3bb9 [maven-release-plugin] prepare for next development iteration 2017-04-29 14:10:00 +02:00
Norman Maurer
f30f242fee [maven-release-plugin] prepare release netty-4.1.10.Final 2017-04-29 14:09:32 +02:00
Scott Mitchell
ea1cb20c90 Netutil IPv6 bugs
Motivation:
NetUtil#isValidIpV6Address and NetUtil#getIPv6ByName allowed an invalid form of mapped IPv4 addresses which lead to accepting invalid IPv6 addresses as valid.

Modifications:
- NetUtil#isValidIpV6Address and NetUtil#getIPv6ByName should only allow 7 colons for an IPv4 address if they are the first 2 characters.

Result:
More correct implementation of NetUtil#isValidIpV6Address and NetUtil#getIPv6ByName
2017-04-28 07:29:36 +02:00
Scott Mitchell
9cb858fcf6 NetUtil IPv6 bugs related to IPv4 and compression
Motivation:
NetUtil#getByName and NetUtil#isValidIpV6Address do not strictly enforce the format of IPv4 addresses that are allowed to be embedded in IPv6 addresses as specified in https://tools.ietf.org/html/rfc4291#section-2.5.5. This may lead to invalid addresses being parsed, or invalid addresses being considered valid. Compression of a single IPv6 word was also not handled correctly if there are 7 : characters.

Modifications:
- NetUtil#isValidIpV6Address should enforce the IPv4-Compatible and IPv4-Mapped are the only valid formats for including IPv4 addresses as specified in https://tools.ietf.org/html/rfc4291#section-2.5.5
- NetUtil#getByName should more stritcly parse IPv6 addresses which contain IPv4 addresses as specified in https://tools.ietf.org/html/rfc4291#section-2.5.5
- NetUtil should allow compression even if the number of : characters is 7.
- NetUtil#createByteArrayFromIpAddressString should use the same IP string to byte[] translation which is used in NetUtil#getByName

Result:
NetUtil#getByName and NetUtil#isValidIpV6Address respect the IPv6 RFC which defines the valid formats for embedding IPv4 addresses.
2017-04-25 15:10:38 -07:00
Jason Tedor
98beb777f8 Enable configuring available processors
Motivation:

In cases when an application is running in a container or is otherwise
constrained to the number of processors that it is using, the JVM
invocation Runtime#availableProcessors will not return the constrained
value but rather the number of processors available to the virtual
machine. Netty uses this number in sizing various resources.
Additionally, some applications will constrain the number of threads
that they are using independenly of the number of processors available
on the system. Thus, applications should have a way to globally
configure the number of processors.

Modifications:

Rather than invoking Runtime#availableProcessors, Netty should rely on a
method that enables configuration when the JVM is started or by the
application. This commit exposes a new class NettyRuntime for enabling
such configuraiton. This value can only be set once. Its default value
is Runtime#availableProcessors so that there is no visible change to
existing applications, but enables configuring either a system property
or configuring during application startup (e.g., based on settings used
to configure the application).

Additionally, we introduce the usage of forbidden-apis to prevent future
uses of Runtime#availableProcessors from creeping. Future work should
enable the bundled signatures and clean up uses of deprecated and
other forbidden methods.

Result:

Netty can be configured to not use the underlying number of processors,
but rather the constrained number of processors.
2017-04-23 10:31:17 +02:00
Nikolay Fedorovskikh
0692bf1b6a fix the typos 2017-04-20 04:56:09 +02:00
Norman Maurer
e482d933f7 Add 'io.netty.tryAllocateUninitializedArray' system property which allows to allocate byte[] without memset in Java9+
Motivation:

Java9 added a new method to Unsafe which allows to allocate a byte[] without memset it. This can have a massive impact in allocation times when the byte[] is big. This change allows to enable this when using Java9 with the io.netty.tryAllocateUninitializedArray property when running Java9+. Please note that you will need to open up the jdk.internal.misc package via '--add-opens java.base/jdk.internal.misc=ALL-UNNAMED' as well.

Modifications:

Allow to allocate byte[] without memset on Java9+

Result:

Better performance when allocate big heap buffers and using java9.
2017-04-19 11:45:39 +02:00
Norman Maurer
1b0b8f80cd AbstractScheduledEventExecutor.schedule(...) must accept delay <= 0.
Motivation:

As the javadoc of ScheduledExecutorService state:

Zero and negative delays (but not periods) are also allowed in schedule methods,and are treated as requests for immediate execution.

Modifications:

- Correctly handle delay <= 0.
- Add unit tests.

Result:

Fixes [#6627].
2017-04-19 11:35:50 +02:00
Lukasz Strzalkowski
7bd0905969 Introduce ReferenceCounted.refCnt()
Motivation:

When debugging netty memory leaks, it's sometimes helpful to
print the object's reference count.

Modifications:

Add `refCnt` methods to set of already exitsting helpers for ref coutned
objects.

Result:

Users will have utility to print object's ref count without much of a
boilerplate.
2017-04-17 19:43:44 +02:00
Norman Maurer
7b6119a0a4 Allow to free direct buffers on java9 again
Motivation:

Java9 adds a new method to Unsafe which allows to free direct ByteBuffer via the cleaner without the need to use an commandline arguments.

Modifications:

- Add Cleaner interface
- Add CleanerJava9 which will be used when using Java9+ and take care of release direct ByteBuffer
- Let Cleaner0 implement Cleaner

Result:

Be able to free direct ByteBuffer on Java9+ again without any commandline arguments.
2017-04-17 19:40:52 +02:00
Norman Maurer
493a8135f8 Ensure test introduced in 5c1c14286d also works on Java9 2017-03-29 22:43:00 +02:00