Commit Graph

577 Commits

Author SHA1 Message Date
Norman Maurer
18356911ab Stop calling BIO_write once internal buffer is full.
Motivation:

Previous we called BIO_write until either everything was written into it or it returned an error, which meant that the buffer is full. This then needed a ERR_clear_error() call which is expensive.

Modifications:

Break out of writing loop once we detect that not everything was written and so the buffer is full.

Result:

Less overhead when writing more data then the internal buffer can take.
2015-07-08 08:39:21 +02:00
Norman Maurer
a9d2b5cef0 Skip empty buffers and not pass these to BIO_write
Motivation:

When BIO_write is called with an empty buffer it will return 0 for which we call ERR_clear_error(). This is not neccessary as we should just skip these buffers. This eliminates a lot of overhead.

Modifications:

Skip empty src buffers when call unwrap(...).

Result:

Less overhead for unwrap(...) when called with empty buffers.
2015-07-08 08:37:51 +02:00
Norman Maurer
0f95b85ec2 Ensure OpenSslSession informations can be retrieved even after shutdown
Motivation:

If a user tries to access various informations on the OpenSslSession after the SSLEngine was closed it will not work if these were not accessed before as we lazy init most of them.

Modifications:

Directly populate the whole OpenSslSession once the handshake is complete and before the user is notified about it.

Result:

OpenSslSession informations are avaible until it is GC'ed.
2015-07-07 09:49:52 +02:00
Norman Maurer
bad8e0d6ab Correctly handle errors when using OpenSSL
Motivation:

We used ERR_get_error() to detect errors and missed to handle different errors. Also we missed to clear the error queue for a thread before invoke SSL operations,
this could lead to detecting errors on different OpenSslEngines then the one in which the error actual happened.

Modifications:

Explicit handle errors via SSL.get_error and clear the error code before SSL operations.

Result:

Correctly handle errors and no false-positives in different OpenSslEngines then the one which detected an error.
2015-06-21 21:06:42 +02:00
Norman Maurer
29ac2ae3c2 [#3883] OpenSSL SSLSession returns incorrect peer principal
Motivation:

According to the javadocs of SSLSession.getPeerPrincipal should be returning the identity of the peer, while we return the identity of the issuer.

Modifications:

Return the correct indentity.

Result:

Behavior match the documentation.
2015-06-17 06:36:13 +02:00
Norman Maurer
d1b7f990f2 Not skip first cert when using OpenSslClientContext
Motivation:

Due a copy and paste error we incorrectly skipped the first cert in the keyCertChainFile when using OpenSslClientContext.

Modifications:

Correctly not skip the first cert.

Result:

The certificate chain is correctly setup when using OpenSslClientContext.
2015-06-10 09:01:31 +02:00
Norman Maurer
4570f30dd9 [#3798] Extract dump method to ByteBufUtil
Motivation:

Dumping the content of a ByteBuf in a hex format is very useful.

Modifications:

Move code into ByteBufUtil so its easy to reuse.

Result:

Easy to reuse dumping code.
2015-06-09 06:21:09 +02:00
Norman Maurer
cf54c04241 Correctly respect readerIndex of buffer when dumping.
Motivation:

The current dumping code does not respect the readerIndex and so logs incorrect.

Modifications:

Respect readerIndex of ByteBuf

Result:

Correctly log content of buffer.
2015-06-08 09:23:40 +02:00
Norman Maurer
a485ae68dc Guard against race when calling SslHandler.handshakeFuture().sync()
Motivation:

If the handlerAdded(...) callback was not called, the checkDeadLock() of the handshakeFuture will produce an IllegalStateException.
This was first reported at https://github.com/impossibl/pgjdbc-ng/issues/168 .

Modifications:

Pass deadlock check if ctx is null

Result:

No more race and so IllegalStateException.
2015-06-08 09:17:27 +02:00
Norman Maurer
2b0dfc4e80 Expose SSL_CTX and SSL pointers
Motivation:

For advanced use-cases it an be helpful to be able to directly access the SSL_CTX and SSL pointers of the underlying openssl objects. This for example allows to register custom C callbacks.

Modifications:

- Expose the SSL_CTX and SSL pointers
- Cleanup the shutdown code

Result:

It's now possible to obtain the c pointes and set native callbacks.
2015-06-05 07:25:06 +02:00
Trustin Lee
0775089496 Replace SpdyOrHttpChooser and Http2OrHttpChooser with ApplicationProtocolNegotiationHandler
Motivation:

SpdyOrHttpChooser and Http2OrHttpChooser duplicate fair amount code with each other.

Modification:

- Replace SpdyOrHttpChooser and Http2OrHttpChooser with ApplicationProtocolNegotiationHandler
- Add ApplicationProtocolNames to define the known application-level protocol names

Result:

- Less code duplication
- A user can perform dynamic pipeline configuration that follows ALPN/NPN for any protocols.
2015-06-05 11:58:20 +09:00
Trustin Lee
afb46b926f Improve the API design of Http2OrHttpChooser and SpdyOrHttpChooser
Related: #3641 and #3813

Motivation:

When setting up an HTTP/1 or HTTP/2 (or SPDY) pipeline, a user usually
ends up with adding arbitrary set of handlers.

Http2OrHttpChooser and SpdyOrHttpChooser have two abstract methods
(create*Handler()) that expect a user to return a single handler, and
also have add*Handlers() methods that add the handler returned by
create*Handler() to the pipeline as well as the pre-defined set of
handlers.

The problem is, some users (read: I) don't need all of them or the
user wants to add more than one handler. For example, take a look at
io.netty.example.http2.tiles.Http2OrHttpHandler, which works around
this issue by overriding addHttp2Handlers() and making
createHttp2RequestHandler() a no-op.

Modifications:

- Replace add*Handlers() and create*Handler() with configure*()
- Rename getProtocol() to selectProtocol() to make what it does clear
- Provide the default implementation of selectProtocol()
- Remove SelectedProtocol.UNKNOWN and use null instead, because
  'UNKNOWN' is not a protocol
- Proper exception handling in the *OrHttpChooser so that the
  exception is logged and the connection is closed when failed to
  select a protocol
- Make SpdyClient example always use SSL. It was always using SSL
  anyway.
- Implement SslHandshakeCompletionEvent.toString() for debuggability
- Remove an orphaned class: JettyNpnSslSession
- Add SslHandler.applicationProtocol() to get the name of the
  application protocol
  - SSLSession.getProtocol() now returns transport-layer protocol name
    only, so that it conforms to its contract.

Result:

- *OrHttpChooser have better API.
- *OrHttpChooser handle protocol selection failure properly.
- SSLSession.getProtocol() now conforms to its contract.
- SpdyClient example works with SpdyServer example out of the box
2015-06-05 11:58:19 +09:00
Norman Maurer
bac2e3a6d2 Reduce calls to System.nanoTime() and object creation in IdleStateHandler. Related to [#3808]
Motivation:

Calling System.nanoTime() for each channelRead(...) is very expensive. See [#3808] for more detailed description.
Also we always do extra work for each write and read even if read or write idle states should not be handled.

Modifications:

- Move System.nanoTime() call to channelReadComplete(...).
- Reuse ChannelFutureListener for writes
- Only add ChannelFutureListener to writes if write and all idle states should be handled.
- Only call System.nanoTime() for reads if idle state events for read and all states should be handled.

Result:

Less overhead when using the IdleStateHandler.
2015-05-27 14:07:39 +02:00
Norman Maurer
6fce3b79c3 Do not try to init TrustManagerFactory if trustCertChainFile is null.
Motivation:

We called TrustManagerFactory.init(...) even when the trustCertChainFile is null. This could lead to exceptions during the handshake.

Modifications:

Correctly only call TurstManagerFactory.init() if trustCertcChainFail is not null.

Result:

Correct behavior.
2015-05-27 13:45:57 +02:00
Scott Mitchell
d5f1dc66aa Consistent use of SSLHandshakeException for ALPN
Motiviation:
The OpenSSL engine uses SSLHandshakeException in the event of failures that occur during the handshake process. The alpn-boot project's getSSLException will also map the no_application_protocol to a SSLHandshakeException exception. We should be consistent and use SSLHandshakeException for handshake failure events.

Modifications:
-Update JdkAlpnSslEngine to propagate an SSLHandshakeException in the event of a failure.

Result:
Consistent usage of SSLHandshakeException during a handshake failure event.
2015-05-26 16:10:58 -07:00
johnou
ad7f033c06 Allow writing with void promise if IdleStateHandler is configured in pipeline.
Motivation:

Allow writing with void promise if IdleStateHandler is configured in the pipeline for read timeout events.

Modifications:

Better performance.

Result:

No more ChannelFutureListeners are created if IdleStateHandler is only configured for read timeouts allowing for writing to the channel with void promise.
2015-05-25 21:09:47 +02:00
Norman Maurer
9d675def81 Only call System.nanoTime() if no read batch is ongoing. Related to [#3808]
Motivation:

[#3808] introduced some improvements to reduce the calls to System.nanoTime() but missed one possible optimization.

Modifications:

Only call System.nanoTime() if no reading patch is in process.

Result:

Less System.nanoTime() calls.
2015-05-25 18:21:00 +02:00
nmittler
e4af176be7 Upgrading Jetty alpn-api version
Motivation:

Discussion is in https://github.com/jetty-project/jetty-alpn/issues/8. The new API allows protocol negotiation to properly throw SSLHandshakeException.

Modifications:

Updated the parent pom.xml with the new version.

Result:

Upgraded alpn-api now allows throwing SSLHandshakeException.
2015-05-22 13:13:14 -07:00
Robert Varga
f3dcad3230 Do not call System.nanoTime() in ReadTimeoutHandler.channelRead()
Motivation:

We mitigate callouts to System.nanoTime() in SingleThreadEventExecutor
as it is 'relatively expensive'. On a modern system, tak translates to
about 20ns per call. With channelReadComplete() we can side-step this in
channelRead().

Modifications:

Introduce a boolean flag, which indicates that a read batch is currently
on-going, which acts as a flush guard for lastReadTime. Update
lastReadTime in channelReadComplete() just before setting the flag to
false. We set the flag to true in channelRead().

The periodic task examines the flag, and if it observes it to be true,
it will reschedule the task for the full duration. If it observes as
false, it will read lastReadTime and adjust the delay accordingly.

Result:

ReadTimeoutHandler calls System.nanoTime() only once per read batch.
2015-05-21 07:14:08 +02:00
Robin Stocker
9bf636076a Fix typo in FingerprintTrustManagerFactory docs 2015-05-18 08:30:25 +02:00
Norman Maurer
b934257796 [#3784] Support hostname verification when using OpenSSLEngine
Motivation:

At the moment hostname verification is not supported with OpenSSLEngine.

Modifications:

- Allow to create OpenSslEngine with peerHost and peerPort informations.
- Respect endPointIdentificationAlgorithm and algorithmConstraints when set and get SSLParamaters.

Result:

hostname verification is supported now.
2015-05-18 08:16:49 +02:00
Eric Anderson
864f196c67 Add missing SslContextBuilder.forServer(KeyManagerFactory)
Motivation:

keyManager() is required on server-side, and so there is a forServer()
method for each override of keyManager(). However, one of the
forServer() overrides was missing, which meant that if you wanted to use
a KeyManagerFactory you were forced to provide garbage configuration
just to get past null checks.

Modifications:

Add missing override.

Result:

No hacks to use SslContextBuilder on server-side with KeyManagerFactory.
Resolves #3775
2015-05-11 22:10:34 +02:00
Norman Maurer
f23b7b4efd [maven-release-plugin] prepare for next development iteration 2015-05-07 14:21:08 -04:00
Norman Maurer
871ce43b1f [maven-release-plugin] prepare release netty-4.1.0.Beta5 2015-05-07 14:20:38 -04:00
Norman Maurer
f963401d42 Allow rejection of remote initiated renegotiation
Motivation:

To prevent from DOS attacks it can be useful to disable remote initiated renegotiation.

Modifications:

Add new flag to OpenSslContext that can be used to disable it
Adding a testcase

Result:

Remote initiated renegotion requests can be disabled now.
2015-05-07 14:41:25 +02:00
Norman Maurer
e71e40057f Fix possible IllegalStateException caused by closeNotifyTimeout when using SslHandler
Motivation:

In the SslHandler we schedule a timeout at which we close the Channel if a timeout was detected during close_notify. Because this can race with notify the flushFuture we can see an IllegalStateException when the Channel is closed.

Modifications:

- Use a trySuccess() and tryFailure(...) to guard against race.

Result:

No more race.
2015-05-06 21:50:16 +02:00
Norman Maurer
868eb49cd2 Only run OpenSslEngineTests if OpenSsl is installed. Related to [#3732] 2015-05-06 10:42:00 +02:00
Norman Maurer
52eae1c9b3 Add support for mutual auth when using OpenSslEngine.
Motivation:

Currently mutual auth is not supported when using OpenSslEngine.

Modification:

- Add support to OpenSslClientContext
- Correctly throw SSLHandshakeException when an error during handshake is detected

Result:

Mutual auth can be used with OpenSslEngine
2015-05-06 09:08:05 +02:00
Eric Anderson
f467d695be Fix SslContextBuilder swapping client and server
The 'forClient' boolean was swapped to 'forServer' in code review of #3531.
Not all locations were updated.
2015-04-20 17:25:14 -07:00
Norman Maurer
62057f73d6 Fix handling of non-auto read for ByteToMessageDecoder and SslHandler
Motivation:

Our automatically handling of non-auto-read failed because it not detected the need of calling read again by itself if nothing was decoded. Beside this handling of non-auto-read never worked for SslHandler as it always triggered a read even if it decoded a message and auto-read was false.

This fixes [#3529] and [#3587].

Modifications:

- Implement handling of calling read when nothing was decoded (with non-auto-read) to ByteToMessageDecoder again
- Correctly respect non-auto-read by SslHandler

Result:

No more stales and correctly respecting of non-auto-read by SslHandler.
2015-04-20 09:11:02 +02:00
Norman Maurer
bdfdf3094d Reduce object allocation during wrap/unwrap while handshake is in progress
Motivation:

Unnecessary object allocation is currently done during wrap/unwrap while a handshake is still in progress.

Modifications:

Use static instances when possible.

Result:

Less object creations.
2015-04-20 06:48:09 +02:00
Norman Maurer
3850cff0fc Allow to get version of available OpenSSL library
Motivation:

Sometimes it's useful to get informations about the available OpenSSL library that is used for the OpenSslEngine.

Modifications:

Add two new methods which allows to get the available OpenSSL version as either
an int or an String.

Result:

Easy to access details about OpenSSL version.
2015-04-18 20:56:27 +02:00
Eric Anderson
4e70523edd The "null" ClassLoader is the bootstrap ClassLoader
Motivation:
Class.forName() documents that null will use bootstrap loader:
http://docs.oracle.com/javase/8/docs/api/java/lang/Class.html#forName-java.lang.String-boolean-java.lang.ClassLoader-

But the link between "null" and bootstrap loader is even more explicit
in ClassLoader's documentation:
http://docs.oracle.com/javase/8/docs/api/java/lang/ClassLoader.html#getParent--

The current code is trying to use the bootstrap loader but seems to have
not been aware of the meaning of null.

Modifications:
Use "null" as the class loader when we want to load classes in the
bootstrap loader.

Result:
More reliable ALPN/NPN loading and simpler code.
2015-04-16 17:26:09 +02:00
Norman Maurer
05498ee938 Fix regression introduced by cherry-pick bd224286f5 2015-04-14 09:36:48 +02:00
Norman Maurer
6c3f5ab34d Add support for EC Keys when using SslServerContext
Motivation:

Sometimes it's useful to use EC keys and not DSA or RSA. We should support it.

Modifications:

Support EC keys and share the code between JDK and Openssl impl.

Result:

It's possible to use EC keys now.
2015-04-14 08:45:22 +02:00
Eric Anderson
bd224286f5 [#3531] Create SslContext.Builder
Motivation:

SslContext factory methods have gotten out of control; it's past time to
swap to a builder.

Modifications:

New Builder class. The existing factory methods must be left as-is for
backward compatibility.

Result:

Fixes #3531
2015-04-14 07:28:34 +02:00
Norman Maurer
aebbb862ac Add support for ALPN when using openssl + NPN client mode and support for CipherSuiteFilter
Motivation:

To support HTTP2 we need APLN support. This was not provided before when using OpenSslEngine, so SSLEngine (JDK one) was the only bet.
Beside this CipherSuiteFilter was not supported

Modifications:

- Upgrade netty-tcnative and make use of new features to support ALPN and NPN in server and client mode.
- Guard against segfaults after the ssl pointer is freed
- support correctly different failure behaviours
- add support for CipherSuiteFilter

Result:

Be able to use OpenSslEngine for ALPN / NPN for server and client.
2015-04-10 18:52:34 +02:00
Frederic Bregier
190cbf55e4 Fix incorrect null value check in TrafficCounter
In TrafficCounter, a recent change makes the contract of the API (the
constructor) wrong and lead to issue with GlobalChannelTrafficCounter
where executor must be null.

Motivation:
TrafficCounter executor argument in constructor might be null, as
explained in the API, for some particular cases where no executor are
needed (relevant tasks being taken by the caller as in
GlobalChannelTrafficCounter).
A null pointer exception is raised while it should not since it is
legal.

Modifications:
Remove the 2 null checking for this particular attribute.
Note that when null, the attribute is not reached nor used (a null
checking condition later on is applied).

Result:
No more null exception raized while it should not.

This shall be made also to 4.0, 4.1 (present) and master. 3.10 is not
concerned.
2015-04-06 18:27:56 +02:00
Trustin Lee
2e509f7bb7 Fix unbounded expansion of cumulative buffer in SslHandler
Related: #3567

Motivation:

SslHandler.channelReadComplete() forgets to call
super.channelReadComplete(), which discards read bytes from the
cumulative buffer.  As a result, the cumulative buffer can expand its
capacity unboundedly.

Modifications:

Call super.channelReadComplete() instead of calling
ctx.fireChannelReadComplete()

Result:

Fixes #3567
2015-04-02 14:54:29 +09:00
Trustin Lee
44eeb5f6b4 Fix intermittent test failure in LoggingHandlerTest
Motivation:

LoggingHandlerTest sometimes failure due to unexpected log messages
logged due to the automatic reclaimation of thread-local objects.

  Expectation failure on verify:
    Appender.doAppend([DEBUG] Freed 3 thread-local buffer(s) from thread: nioEventLoopGroup-23-0): expected: 1, actual: 0
    Appender.doAppend([DEBUG] Freed 9 thread-local buffer(s) from thread: nioEventLoopGroup-23-1): expected: 1, actual: 0
    Appender.doAppend([DEBUG] Freed 2 thread-local buffer(s) from thread: nioEventLoopGroup-23-2): expected: 1, actual: 0
    Appender.doAppend([DEBUG] Freed 4 thread-local buffer(s) from thread: nioEventLoopGroup-26-0): expected: 1, actual: 0
    Appender.doAppend(matchesLog(expected: ".+CLOSE$", got: "[id: 0xembedded, embedded => embedded] CLOSE")): expected: 1, actual: 0

Modifications:

Add the mock appender to the related logger only

Result:

No more intermittent test failures
2015-03-31 15:08:52 +09:00
Trustin Lee
f4e527c64d Don't trigger IOException at ChunkedStream.isEndOfInput()
Related: #3368

Motivation:

ChunkedWriteHandler checks if the return value of
ChunkedInput.isEndOfInput() after calling ChunkedInput.close().

This makes ChunkedStream.isEndOfInput() trigger an IOException, which is
originally triggered by PushBackInputStream.read().

By contract, ChunkedInput.isEndOfInput() should not raise an IOException
even when the underlying stream is closed.

Modifications:

Add a boolean flag that keeps track of whether the underlying stream has
been closed or not, so that ChunkedStream.isEndOfInput() does not
propagate the IOException from PushBackInputStream.

Result:

Fixes #3368
2015-03-31 11:38:25 +09:00
Norman Maurer
a2428c7e47 Add supported for X509ExtendedTrustManager when using OpenSslEngine
Motivation:

For some use cases X509ExtendedTrustManager is needed as it allows to also access the SslEngine during validation.

Modifications:

Add support for X509ExtendedTrustManager on java >= 7

Result:

It's now possible to use X509ExtendedTrustManager with OpenSslEngine
2015-03-30 09:05:18 +02:00
nmittler
0fe67cfba5 Using public LogLevel for HTTP/2 frame logging.
Motivation:

The Http2FrameLogger is currently using the internal logging classes. We should change this so that it's using the public classes and then converts internally.

Modifications:

Modified Http2FrameLogger and the examples to use the public LogLevel class.

Result:

Fixes #2512
2015-03-17 15:10:35 -07:00
Leonardo Freitas Gomes
a97e413a65 Ensure server preference order in ALPN
Motivation:
With the current implementation the client protocol preference list
takes precedence over the one of the server, since the select method
will return the first item, in the client list, that matches any of the
protocols supported by the server. This violates the recommendation of
http://tools.ietf.org/html/rfc7301#section-3.2.

It will also fail with the current implementation of Chrome, which
sends back Extension application_layer_protocol_negotiation, protocols:
[http/1.1, spdy/3.1, h2-14]

Modifications:
Changed the protocol negotiator to prefer server’s list. Added a test
case that demonstrates the issue and that is fixed with the
modifications of this commit.

Result:
Server’s preference list is used.
2015-03-17 07:28:53 +01:00
Trustin Lee
8c135cdd55 Add a new constructor without handler parameter to TrafficCounter
Related: #3476

Motivation:

Some users use TrafficCounter for other uses than we originally
intended, such as implementing their own traffic shaper.  In such a
case, a user does not want to specify an AbstractTrafficShapingHandler.

Modifications:

- Add a new constructor that does not require an
  AbstractTrafficShapingHandler, so that a user can use it without it.
- Simplify TrafficMonitoringTask
- Javadoc cleanup

Result:

We open the possibility of using TrafficCounter for other purposes than
just using it with AbstractTrafficShapingHandler.  Eventually, we could
generalize it a little bit more, so that we can potentially use it for
other uses.
2015-03-10 11:28:11 +09:00
Norman Maurer
fce0989844 [maven-release-plugin] prepare for next development iteration 2015-03-03 02:06:47 -05:00
Norman Maurer
ca3b1bc4b7 [maven-release-plugin] prepare release netty-4.1.0.Beta4 2015-03-03 02:05:52 -05:00
Norman Maurer
f20439b6d3 Various performance optimizations in OpenSslEngine
Motivation:

There are various places in OpenSslEngine wher we can do performance optimizations.

Modifications:

- Reduce JNI calls when possible
- Detect finished handshake as soon as possible
- Eliminate double calculations
- wrap multiple ByteBuffer if possible in a loop

Result:

Better performance
2015-02-09 06:20:19 +01:00
Norman Maurer
270e0785fd Log only on debug log level in OpenSslEngine
Motivation:

At the moment we log priming read and handshake errors via info log level and still throw a SSLException that contains the error. We should only log with debug level to generate less noise.

Modifications:

Change logging to debug level.

Result:

Less noise .
2015-02-07 06:01:58 +01:00
scottmitch
50a857cecf SonarQube issues OpenSslEngine
Motivation:
SonarQube (clinker.netty.io/sonar) reported a few 'critical' issues related to the OpenSslEngine.

Modifications:
- Remove potential for dereference of null variable.
- Remove duplicate null check and TODO cleanup.

Results:
Less potential for null dereference, cleaner code, and 1 less TODO.
2015-02-03 20:04:28 +01:00
Norman Maurer
200c6efc75 [#3364] Not use VoidChannelPromise in SslHandler to guard against IllegalStateException
Motivation:

SslHandler adds a pending write with an empty buffer and a VoidChannelPromise when a user flush and not pending writes are currently stored. This may produce an IllegalStateException later if the user try to add a ChannelFutureListener to the promise in the next ChannelOutboundHandler.

Modifications:

Replace ctx.voidPromise() with ctx.newPromise()

Result:

No more IllegalStateException possible
2015-01-30 19:23:03 +01:00
Norman Maurer
8bc21ecdd0 [#3376] Use IllegalArgumentException as replacement for NPE as stated in javadocs
Motivation:

SSLEngine specifies that IllegalArgumentException must be thrown if a null argument is given when using wrap(...) or unwrap(...).

Modifications:

Replace NullPointerException with IllegalArgumentException to match the javadocs.

Result:

Match the javadocs.
2015-01-30 05:56:20 +01:00
Norman Maurer
4619e88a7b [#3375] Correctly calculate the endOffset when wrap multiple ByteBuffer
Motivation:

We failed to correctly calculate the endOffset when wrap multiple ByteBuffer and so not wrapped everything when an offset > 0 is used.

Modifications:

Correctly calculate endOffset.

Result:

All ByteBuffers are correctly wrapped when offset > 0.
2015-01-30 05:37:17 +01:00
Trustin Lee
392fb764b6 Fix IndexOutOfBoundsException from SslHandler on JDK 8
Motivation:

When SslHandler.unwrap() copies SSL records into a heap buffer, it does
not update the start offset, causing IndexOutOfBoundsException.

Modifications:

- Copy to a heap buffer before calling unwrap() for simplicity
- Do not copy an empty buffer to a heap buffer.
  - unwrap(... EMPTY_BUFFER ...) never involves copying now.
- Use better parameter names for unwrap()
- Clean-up log messages

Result:

- Bugs fixed
- Cleaner code
2015-01-13 18:14:37 +09:00
Norman Maurer
1bb818bb59 Reduce memory copies when using OpenSslEngine with SslHandler
Motivation:

When using OpenSslEngine with the SslHandler it is possible to reduce memory copies by unwrap(...) multiple ByteBuffers at the same time. This way we can eliminate a memory copy that is needed otherwise to cumulate partial received data.

Modifications:

- Add OpenSslEngine.unwrap(ByteBuffer[],...) method that can be used to unwrap multiple src ByteBuffer a the same time
- Use a CompositeByteBuffer in SslHandler for inbound data so we not need to memory copy
- Add OpenSslEngine.unwrap(ByteBuffer[],...) in SslHandler if OpenSslEngine is used and the inbound ByteBuf is backed by more then one ByteBuffer
- Reduce object allocation

Result:

SslHandler is faster when using OpenSslEngine and produce less GC
2015-01-12 20:19:42 +01:00
Trustin Lee
cb7ab1f6a4 Fix a compilation error 2015-01-09 16:00:26 +09:00
Norman Maurer
50af9b916c Eliminate memory copy in ByteToMessageDecoder whenever possible
Motivation:

Currently when there are bytes left in the cumulation buffer we do a byte copy to produce the input buffer for the decode method. This can put quite some overhead on the impl.

Modification:

- Use a CompositeByteBuf to eliminate the byte copy.
- Allow to specify if a CompositeBytebug should be used or not as some handlers can only act on one ByteBuffer in an efficient way (like SslHandler :( ).

Result:

Performance improvement as shown in the following benchmark.

Without this patch:
[xxx@xxx ~]$ ./wrk-benchmark
Running 5m test @ http://xxx:8080/plaintext
  16 threads and 256 connections
  Thread Stats   Avg      Stdev     Max   +/- Stdev
    Latency    20.19ms   38.34ms   1.02s    98.70%
    Req/Sec   241.10k    26.50k  303.45k    93.46%
  1153994119 requests in 5.00m, 155.84GB read
Requests/sec: 3846702.44
Transfer/sec:    531.93MB

With the patch:
[xxx@xxx ~]$ ./wrk-benchmark
Running 5m test @ http://xxx:8080/plaintext
  16 threads and 256 connections
  Thread Stats   Avg      Stdev     Max   +/- Stdev
    Latency    17.34ms   27.14ms 877.62ms   98.26%
    Req/Sec   252.55k    23.77k  329.50k    87.71%
  1209772221 requests in 5.00m, 163.37GB read
Requests/sec: 4032584.22
Transfer/sec:    557.64MB
2015-01-09 15:56:30 +09:00
Trustin Lee
98731a51c8 Add the URL of the wiki for easier troubleshooting
Motivation:

When a user sees an error message, sometimes he or she does not know
what exactly he or she has to do to fix the problem.

Modifications:

Log the URL of the wiki pages that might help the user troubleshoot.

Result:

We are more friendly.
2015-01-08 12:45:34 +09:00
Trustin Lee
2c3f4a374a Do not log CNFE when tcnative is not in classpath
Motivation:

When a user deliberatively omitted netty-tcnative from classpath, he or
she will see an ugly stack trace of ClassNotFoundException.

Modifications:

Log more briefly when netty-tcnative is not in classpath.

Result:

Better-looking log at DEBUG level
2015-01-08 12:27:04 +09:00
Trustin Lee
df186f38a0 Do not pre-populate cipher suite conversion table
Motivation:

- There's no point of pre-population.
- Waste of memory and time because they are going to be cached lazily
- Some pre-populated cipher suites are ancient and will be unused

Modification:

- Remove cache pre-population

Result:

Sanity restored
2014-12-31 20:33:53 +09:00
Norman Maurer
405cdc89dd Only call JNI methods if really needed
Motivation:

Calling JNI methods is pretty expensive, so we should only do if needed.

Modifications:

Lazy call methods if needed.

Result:

Better performance.
2014-12-30 19:45:23 +09:00
Trustin Lee
ea5f38955a Raise an exception when the specified cipher suite is not available
Motivation:

SSL_set_cipher_list() in OpenSSL does not fail as long as at least one
cipher suite is available.  It is different from the semantics of
SSLEngine.setEnabledCipherSuites(), which raises an exception when the
list contains an unavailable cipher suite.

Modifications:

- Add OpenSsl.isCipherSuiteAvailable(String) which checks the
  availability of a cipher suite
- Raise an IllegalArgumentException when the specified cipher suite is
  not available

Result:

Fixed compatibility
2014-12-30 19:26:06 +09:00
Trustin Lee
7d50f7864c Implement OpenSslEngine.getSupportedCipherSuites() and get/setEnabledCipherSuites()
Motivation:

To make OpenSslEngine a full drop-in replacement, we need to implement
getSupportedCipherSuites() and get/setEnabledCipherSuites().

Modifications:

- Retrieve the list of the available cipher suites when initializing
  OpenSsl.
- Improve CipherSuiteConverter to understand SRP
- Add more test data to CipherSuiteConverterTest
- Add bulk-conversion method to CipherSuiteConverter

Result:

OpenSslEngine should now be a drop-in replacement for JDK SSLEngineImpl
for most cases.
2014-12-30 19:26:05 +09:00
Trustin Lee
a093f00b67 Cipher suite conversion between Java and OpenSSL
Related: #3285

Motivation:

When a user attempts to switch from JdkSslContext to OpenSslContext, he
or she will see the initialization failure if he or she specified custom
cipher suites.

Modifications:

- Provide a utility class that converts between Java cipher suite string
  and OpenSSL cipher suite string
- Attempt to convert the cipher suite so that a user can use the cipher
  suite string format of Java regardless of the chosen SslContext impl

Result:

- It is possible to convert all known cipher suite strings.
- It is possible to switch from JdkSslContext and OpenSslContext and
  vice versa without any configuration changes
2014-12-30 17:27:25 +09:00
Trustin Lee
a77070fe9f Clean-up 2014-12-29 15:55:57 +09:00
Frederic Bregier
2681112080 Fix big transfer and Write traffic shaping issues
Motivation:

Several issues were shown by various ticket (#2900 #2956).
Also use the improvement on writability user management from #3036.
And finally add a mixte handler, both for Global and Channels, with
the advantages of being uniquely created and using less memory and
less shaping.

Issue #2900

When a huge amount of data are written, the current behavior of the
TrafficShaping handler is to limit the delay to 15s, whatever the delay
the previous write has. This is wrong, and when a huge amount of writes
are done in a short time, the traffic is not correctly shapened.

Moreover, there is a high risk of OOM if one is not using in his/her own
handler for instance ChannelFuture.addListener() to handle the write
bufferisation in the TrafficShapingHandler.

This fix use the "user-defined writability flags" from #3036 to
allow the TrafficShapingHandlers to "user-defined" managed writability
directly, as for reading, thus using the default isWritable() and
channelWritabilityChanged().
This allows for instance HttpChunkedInput to be fully compatible.

The "bandwidth" compute on write is only on "acquired" write orders, not
on "real" write orders, which is wrong from statistic point of view.

Issue #2956

When using GlobalTrafficShaping, every write (and read) are
synchronized, thus leading to a drop of performance.
ChannelTrafficShaping is not touched by this issue since synchronized is
then correct (handler is per channel, so the synchronized).

Modifications:
The current write delay computation takes into account the previous
write delay and time to check is the 15s delay (maxTime) is really
exceeded or not (using last scheduled write time). The algorithm is
simplified and in the same time more accurate.

This proposal uses the #3036 improvement on user-defined writability
flags.

When the real write occurs, the statistics are update accordingly on a
new attribute (getRealWriteThroughput()).

To limit the synchronisations, all synchronized on
GlobalTrafficShapingHandler on submitWrite were removed. They are
replaced with a lock per channel (since synchronization is still needed
to prevent unordered write per channel), as in the sendAllValid method
for the very same reason.
Also all synchronized on TrafficCounter on read/writeTimeToWait() are
removed as they are unnecessary since already locked before by the
caller.
Still the creation and remove operations on lock per channel (PerChannel
object) are synchronized to prevent concurrency issue on this critical
part, but then limited.

Additionnal changes:
1) Use System.nanoTime() instead of System.currentTimeMillis() and
minimize calls
2) Remove / 10 ° 10 since no more sleep usage
3) Use nanoTime instead of currentTime such that time spend is computed,
not real time clock. Therefore the "now" relative time (nanoTime based)
is passed on all sub methods.
4) Take care of removal of the handler to force write all pending writes
and release read too
8) Review Javadoc to explicit:

- recommandations to take into account isWritable

- recommandations to provide reasonable message size according to
traffic shaping limit

- explicit "best effort" traffic shaping behavior when changing
configuration dynamically

Add a MixteGlobalChannelTrafficShapingHandler which allows to use only one
handler for mixing Global and Channel TSH. I enables to save more memory and
tries to optimize the traffic among various channels.

Result:
The traffic shaping is more stable, even with a huge number of writes in
short time by taking into consideration last scheduled write time.

The current implementation of TrafficShapingHandler using user-defined
writability flags and default isWritable() and
fireChannelWritabilityChanged works as expected.

The statistics are more valuable (asked write vs real write).

The Global TrafficShapingHandler should now have less "global"
synchronization, hoping to the minimum, but still per Channel as needed.

The GlobalChannel TrafficShapingHandler allows to have only one handler for all channels while still offering per channel in addition to global traffic shaping.

And finally maintain backward compatibility.
2014-12-29 15:47:06 +09:00
Norman Maurer
b8dd95b8ad Allow to set the context for which sessions can be used.
Motivation:

Openssl supports the SSL_CTX_set_session_id_context function to limit for which context a session can be used. We should support this.

Modifications:

Add OpenSslServerSessionContext that exposes a setSessionIdContext(...) method now.

Result:

It's now possible to use SSL_CTX_set_session_id_context.
2014-12-26 15:03:35 +01:00
Norman Maurer
8e6739ddc0 Explicit allow to enable / disable session cache
Motivation:

It is sometimes useful to enable / disable the session cache.

Modifications:

* Add OpenSslSessionContext.setSessionCacheEnabled(...) and isSessionCacheEnabled()

Result:

It is now possible to enable / disable cache on the fly
2014-12-26 14:57:10 +01:00
Norman Maurer
8a1c7f2ca6 Allow to enable/disable protocols on the OpenSslEngine
Motivation:

To be compatible with SSLEngine we need to support enable / disable procols on the OpenSslEngine

Modifications:

Implement OpenSslEngine.getSupportedProtocols() , getEnabledProtocols() and setEnabledProtocols(...)

Result:

Better compability with SSLEngine
2014-12-26 09:34:21 +01:00
Norman Maurer
7423db0b8e Add proper Openssl.SSLSession.getId() implementation
Motivation:

The current implementation not returns the real session as byte[] representation.

Modifications:

Create a proper Openssl.SSLSession.get() implementation which returns the real session as byte[].

Result:

More correct implementation
2014-12-26 09:30:32 +01:00
Norman Maurer
fb3b16d9d4 Allow to enable session cache when using OpenSsl
Motivation:

At the moment it is not possible to make use of the session cache when OpenSsl is used. This should be possible when server mode is used.

Modifications:

- Add OpenSslSessionContext (implements SSLSessionContext) which exposes all the methods to modify the session cache.
- Add various extra methods to OpenSslSessionContext for extra functionality
- Return OpenSslSessionContext when OpenSslEngine.getSession().getContext() is called.
- Add sessionContext() to SslContext
- Move OpenSsl specific session operations to OpenSslSessionContext and mark the old methods @deprecated

Result:

It's now possible to use session cache with OpenSsl
2014-12-26 09:22:38 +01:00
Trustin Lee
cf6eb70f93 Fix NoClassDefFoundError when netty-tcnative is unavailable
Motivation:

ProxyHandlerTest fails with NoClassDefFoundError raised by
SslContext.newClientContext().

Modifications:

Fix a missing 'return' statement that makes the switch-case block fall
through unncecessarily

Result:

- ProxyHandlerTest does not fail anymore.
- SslContext.newClientContext() does not raise NoClassDefFoundError
  anymore.
2014-12-26 15:44:39 +09:00
Norman Maurer
5c57b5de5b Check for errors without object allocation
Motivation:

At the moment we use SSL.getLastError() in unwrap(...) to check for error. This is very inefficient as it creates a new String for each check and we also use a String.startsWith(...) to detect if there was an error we need to handle.

Modifications:

Use SSL.getLastErrorNumber() to detect if we need to handle an error, as this only returns a long and so no String creation happens. Also the detection is much cheaper as we can now only compare longs. Once an error is detected the lately SSL.getErrorString(long) is used to conver the error number to a String and include it in log and exception message.

Result:

Performance improvements in OpenSslEngine.unwrap(...) due less object allocation and also faster comparations.
2014-12-22 21:09:49 +01:00
Norman Maurer
1729859c68 Use OpenSslClientContext as default if openssl is avaible
Motivation:

As we now support OpenSslEngine for client side, we should use it when avaible.

Modifications:

Use SslProvider.OPENSSL when openssl can be found

Result:

OpenSslEngine is used whenever possible
2014-12-22 21:08:04 +01:00
Norman Maurer
15ca81a565 Allow to use custom TrustManagerFactory for JdkSslServerContent and OpenSslServerContext
Motivation:

When using client auth it is sometimes needed to use a custom TrustManagerFactory.

Modifications:

Allow to pass in TrustManagerFactory

Result:

It's now possible to use custom TrustManagerFactories for JdkSslServerContext and OpenSslServerContext
2014-12-22 20:56:49 +01:00
Norman Maurer
393e3ea383 Use TrustManager for certificate verification
Motivation:

To make OpenSsl*Context a drop in replacement for JdkSsl*Context we need to use TrustManager.

Modifications:

Correctly hook in the TrustManager

Result:

Better compatibility
2014-12-22 20:26:53 +01:00
Norman Maurer
473c23aec9 Allow to enable client authentication on the OpenSslEngine
Motivation:

At the moment there is no way to enable client authentication when using OpenSslEngine. This limits the uses of OpenSslEngine.

Modifications:

Add support for different authentication modes.

Result:

OpenSslEngine can now also be used when client authenticiation is needed.
2014-12-22 20:18:51 +01:00
Norman Maurer
87eca066da More complete OpenSslEngine SSLSession implementation
Motivation:

The current SSLSession implementation used by OpenSslEngine does not support various operations and so may not be a good replacement by the SSLEngine provided by the JDK implementation.

Modifications:

- Add SSLSession.getCreationTime()
- Add SSLSession.getLastAccessedTime()
- Add SSLSession.putValue(...), getValue(...), removeValue(...), getValueNames()
- Add correct SSLSession.getProtocol()
- Ensure OpenSSLEngine.getSession() is thread-safe
- Use optimized AtomicIntegerFieldUpdater when possible

Result:

More complete OpenSslEngine SSLSession implementation
2014-12-22 20:12:51 +01:00
Norman Maurer
682df517c9 Add OpenSslClientContext to allow creating SslEngine for client side
Motivation:

We only support openssl for server side at the moment but it would be also useful for client side.

Modification:

* Upgrade to new netty-tcnative snapshot to support client side openssl support
* Add OpenSslClientContext which can be used to create SslEngine for client side usage
* Factor out common logic between OpenSslClientContext and OpenSslServerContent into new abstract base class called OpenSslContext
* Correctly detect handshake failures as soon as possible
* Guard against segfault caused by multiple calls to destroyPools(). This can happen if OpenSslContext throws an exception in the constructor and the finalize() method is called later during GC

Result:

openssl can be used for client and servers now.
2014-12-22 19:38:30 +01:00
Norman Maurer
b7e82b2ccb Efficiently handle writing ( wrap(...) ) of CompositeByteBuf when using SslHandler
Motivation:

SslHandler.wrap(...) does a poor job when handling CompositeByteBuf as it always call ByteBuf.nioBuffer() which will do a memory copy when a CompositeByteBuf is used that is backed by multiple ByteBuf.

Modifications:

- Use SslEngine.wrap(ByteBuffer[]...) to allow wrap CompositeByteBuf in an efficient manner
- Reduce object allocation in unwrapNonAppData(...)

Result:

Performance improvement when a CompositeByteBuf is written and the SslHandler is in the ChannelPipeline.
2014-12-22 12:15:07 +01:00
Norman Maurer
699e6e3b02 Fix memory leak in OpenSslEngine
Motivation:

When a remote peer did open a connection and only do the handshake without sending any data and then directly close the connection we did not call shutdown() in the OpenSslEngine. This leads to a native memory leak. Beside this it also was not fireed when a OpenSslEngine was created but never used.

Modifications:

- Make sure shutdown() is called in all cases when closeInbound() is called
- Call shutdown() also in the finalize() method to ensure we release native memory when the OpenSslEngine is GC'ed

Result:

No more memory leak when using OpenSslEngine
2014-12-21 09:27:49 +01:00
Trustin Lee
e72b2235fb Make sure to notify handshake success even if SSLEngine is closed
Related:

e9685ea45a

Motivation:

SslHandler.unwrap() does not evaluate the handshake status of
SSLEngine.unwrap() when the status of SSLEngine.unwrap() is CLOSED.

It is not correct because the status does not reflect the state of the
handshake currently in progress, accoding to the API documentation of
SSLEngineResult.Status.

Also, sslCloseFuture can be notified earlier than handshake notification
because we call sslCloseFuture.trySuccess() before evaluating handshake
status.

Modifications:

- Notify sslCloseFuture after the unwrap loop is finished
- Add more assertions to SocketSslEchoTest

Result:

Potentially fix the regression caused by:
- e9685ea45a
2014-12-12 11:55:27 +09:00
Trustin Lee
d5a24d4f6c Make SslHandler work when autoRead is turned off
Related: #2958

Motivation:

SslHandler currently does not issue a read() request when it is
handshaking. It makes a connection with autoRead off stall, because a
user's read() request can be used to read the handshake response which
is invisible to the user.

Modifications:

- SslHandler now issues a read() request when:
  - the current handshake is in progress and channelReadComplete() is
    invoked
  - the current handshake is complete and a user issued a read() request
    during handshake
- Rename flushedBeforeHandshakeDone to flushedBeforeHandshake for
  consistency with the new variable 'readDuringHandshake'

Result:

SslHandler should work regardless whether autoRead is on or off.
2014-12-11 17:57:28 +09:00
Trustin Lee
1dc1831abf Add SslHandler.renegotiate()
Related: #3125

Motivation:

We did not expose a way to initiate TLS renegotiation and to get
notified when the renegotiation is done.

Modifications:

- Add SslHandler.renegotiate() so that a user can initiate TLS
  renegotiation and get the future that's notified on completion
- Make SslHandler.handshakeFuture() return the future for the most
  recent handshake so that a user can get the future of the last
  renegotiation
- Add the test for renegotiation to SocketSslEchoTest

Result:

Both client-initiated and server-initiated renegotiations are now
supported properly.
2014-12-10 18:59:50 +09:00
Trustin Lee
9ff234abed Call ctx.flush() at least once in ChunkedWriteHandler.flush()
Related: #3219

Motivation:

ChunkedWriteHandler.flush() does not call ctx.flush() when channel is
not writable. This can be a problem when other handler / non-Netty
thread writes messages simultaneously, because
ChunkedWriteHandler.flush() might have no chance to observe
channel.isWritable() returns true and thus the channel is never flushed.

Modifications:

- Ensure that ChunkedWriteHandler.flush() calls ctx.flush() at least
  once.

Result:

A stall connection issue, that occurs when certain combination of
handlers exist in a pipeline, has been fixed. (e.g. SslHandler and
ChunkedWriteHandler)
2014-12-09 18:17:46 +09:00
Trustin Lee
bf58f871c3 Overall clean-up of the initial SniHandler/DomainNameMapping work
- Parameterize DomainNameMapping to make it useful for other use cases
  than just mapping to SslContext
- Move DomainNameMapping to io.netty.util
- Clean-up the API documentation
- Make SniHandler.hostname and sslContext volatile because they can be
  accessed by non-I/O threads
2014-12-04 18:23:07 +09:00
Trustin Lee
96d596802b Fix dependency issues with hamcrest
Motivation:

We use 3 (!) libraries to build mock objects - easymock, mockito, jmock.
Mockito and jMock pulls in the different versions of Hamcrest, and it
conflicts with the version pulled by jUnit.

Modifications:

- Replace mockito-all with mockito-core to avoid pulling in outdated
  jUnit and Hamcrest
- Exclude junit-dep when pulling in jmock-junit4, because it pulls an
  outdated Hamcrest version
- Pull in the hamcrest-library version used by jUnit explicitly

Result:

No more dependency hell that results in NoSuchMethodError during the
tests
2014-12-04 17:59:15 +09:00
Sun Ning
8f77c80795 Added support for SSL Server Name Indication.
Motivation:

When we need to host multiple server name with a single IP, it requires
the server to support Server Name Indication extension to serve clients
with proper certificate. So the SniHandler will host multiple
SslContext(s) and append SslHandler for requested hostname.

Modification:

* Added SniHandler to host multiple certifications in a single server
* Test case

Result:

User could use SniHandler to host multiple certifcates at a time.
It's server-side only.
2014-12-03 11:03:15 +01:00
Ronald Chen
e1273147fa replaced broken &lt with < and same for gt 2014-11-29 19:33:50 +01:00
Graham Edgecombe
d33a80da26 Use Triple DES in JdkSslContext cipher suite list.
Motivation:

JdkSslContext used SSL_RSA_WITH_DES_CBC_SHA in its cipher suite list.
OpenSslServerContext used DES-CBC3-SHA in the same place in its cipher suite
list, which is equivalent to SSL_RSA_WITH_3DES_EDE_CBC_SHA.

This means the lists were out of sync. Furthermore, using
SSL_RSA_WITH_DES_CBC_SHA is not desirable as it uses DES, a weak cipher. Triple
DES should be used instead.

Modifications:

Replace SSL_RSA_WITH_DES_CBC_SHA with SSL_RSA_WITH_3DES_EDE_CBC_SHA in
JdkSslContext.

Result:

The JdkSslContext and OpenSslServerContext cipher suite lists are now in sync.
Triple DES is used instead of DES, which is stronger.
2014-11-27 08:15:34 +01:00
Trustin Lee
88aa9e7c4a Remove or de-prioritize RC4 from default cipher suites
Motivation:

RC4 is not a recommended cipher suite anymore, as the recent research
reveals, such as:

- http://www.isg.rhul.ac.uk/tls/

Modifications:

- Remove most RC4 cipher suites from the default cipher suites
- For backward compatibility, leave RC4-SHA, while de-prioritizing it

Result:

Potentially safer default
2014-11-25 17:17:20 +09:00
Idel Pivnitskiy
35db3c6710 Small performance improvements
Motivation:

Found performance issues via FindBugs and PMD.

Modifications:

- Removed unnecessary boxing/unboxing operations in DefaultTextHeaders.convertToInt(CharSequence) and DefaultTextHeaders.convertToLong(CharSequence). A boxed primitive is created from a string, just to extract the unboxed primitive value.
- Added a static modifier for DefaultHttp2Connection.ParentChangedEvent class. This class is an inner class, but does not use its embedded reference to the object which created it. This reference makes the instances of the class larger, and may keep the reference to the creator object alive longer than necessary.
- Added a static compiled Pattern to avoid compile it each time it is used when we need to replace some part of authority.
- Improved using of StringBuilders.

Result:

Performance improvements.
2014-11-20 00:10:06 -05:00
Trustin Lee
f2678a31ff Add ApplicationProtocolConfig.DISABLED
Motivation:

When ALPN/NPN is disabled, a user has to instantiate a new
ApplicationProtocolConfig with meaningless parameters.

Modifications:

- Add ApplicationProtocolConfig.DISABLED, the singleton instance
- Reject the constructor calls with Protocol.NONE, which doesn't make
  much sense because a user should use DISABLED instead.

Result:

More user-friendly API when ALPN/NPN is not needed by a user.
2014-10-31 14:09:46 +09:00
Trustin Lee
06217aefb7 Add back the removed deprecated methods in SslContext
Motivation:

Previous backport removed the old methods and constructors. They should
not be removed in 4.x but just deprecated in favor of the new methods
and constructors.

Modifications:

Add back the removed methods and constructors in SslContext and its
subtypes for backward compatibility.

Result:

Backward compatibility issues fixed.
2014-10-31 13:53:31 +09:00
Trustin Lee
16fb44cf97 Code clean-up
- Fix the inspector warnings
- Fix the infinite recursion in SslContext.newClientContext()
- Fix Javadoc errors
2014-10-31 13:00:05 +09:00
Scott Mitchell
04f77b76f8 Backport ALPN and Mutual Auth SSL
Motivation:

Improvements were made on the main line to support ALPN and mutual
authentication for TLS. These should be backported.

Modifications:

- Backport commits from the master branch
  - f8af84d599
  - e74c8edba3

Result:

Support for ALPN and mutual authentication.
2014-10-31 12:52:26 +09:00
Scott Mitchell
746c8cab32 SslHander wrap conditional direct buffer allocation
Motivation:
The SslHandler currently forces the use of a direct buffer for the input to the SSLEngine.wrap(..) operation. This allocation may not always be desired and should be conditionally done.

Modifications:
- Use the pre-existing wantsDirectBuffer variable as the condition to do the conversion.

Result:
- An allocation of a direct byte buffer and a copy of data is now not required for every SslHandler wrap operation.
2014-10-30 10:10:30 +01:00
Scott Mitchell
06ea226a28 SslHandler wrap memory leak
Motivation:
The SslHandler wrap method requires that a direct buffer be passed to the SSLEngine.wrap() call. If the ByteBuf parameter does not have an underlying direct buffer then one is allocated in this method, but it is not released.

Modifications:
- Release the direct ByteBuffer only accessible in the scope of SslHandler.wrap

Result:
Memory leak in SslHandler.wrap is fixed.
2014-10-28 06:12:45 +01:00
Trustin Lee
a1af35313c Disable SSLv3 to avoid POODLE vulnerability
Related: #3031

Motivation:

The only way to protect ourselves from POODLE vulnerability in Java for
now is to disable SSLv3.

- http://en.wikipedia.org/wiki/POODLE
- https://blogs.oracle.com/security/entry/information_about_ssl_poodle_vulnerability

Modifivation:

Disable SSLv3 in SslContext implementations

Result:

Prevent POODLE vulnerability when a user used SslContext with the
default configuration
2014-10-21 14:00:43 +09:00
kerr
b828e823ef Change the operator order of TrafficCounter to calculate the throughput to get the correct result
Motivation:
Currently the last read/write throughput is calculated by first division,this will be 0 if the last read/write bytes < interval,change the order will get the correct result

Modifications:
Change the operator order from first do division to multiplication

Result:
Get the correct result instead of 0 when bytes are smaller than interval
2014-10-01 06:37:36 +02:00