- Fixes#1528
It's not really easy to provide a general-purpose abstraction for fast-yet-safe iteration. Instead of making forEachByte() less optimal, let's make it do what it does really well, and allow a user to implement potentially unsafe-yet-fast loop using unsafe operations.
* The problem with the release(..) calls here was that it would have called release on an unsupported message and then throw an exception. This exception will trigger ChannelOutboundBuffer.fail(..), which will also try to release the message again.
* Also use the same exception type for unsupported messages as in other channel impls.
- MessageList.array() should give better performance + concise code
- MessageList.add(T[], int, int) iterated over the source array 3 times at worst case. This commit reduces that to 1 time.
- Related: #1378
- They now accept only one argument.
- A user who wants to use a buffer for more complex use cases, he or she can always access the buffer directly via memoryAddress() and array()
- Fixes#1426
- We already allow a user instantiate an EventLoopGroup with the default number of threads via the default constructor, so I think it's OK although it's not always optimal.
- Fixes#1486
- Decreased the default from 16 to 1 because unnecessary extra read on req-res protocols results in lower throughput due to extra syscalls.
- No need to have fine-grained lookup table because the buffer pool has
much more coarse capacities available
- No need to use a loop to normalize a buffer capacity
- SimpleChannelInboundHandler now has a constructor parameter to let a
user decide to enable automatic message release. (the default is to
enable), which makes ChannelInboundConsumingHandler of less value.
This reverts commit a1a86b9de4 because the
semantic of ctx.isRemoved() is confusing to a user - why is
ctx.isRemoved() false when handlerRemoved() is invoked? A better
solution would be check if the connection is inactive and mark the
promise as failure before attempting to write anything.
- Related issue: #1432
- Add Future.isCancellable()
- Add Promise.setUncancellable() which is meant to be used for the party that runs the task uncancellable once started
- Implement Future.isCancelled() and Promise.cancel(boolean) properly
The AIO transport was added in the past as we hoped it would have better latency as the NIO transport. But in reality this was never the case.
So there is no reason to use the AIO transport at all. It just put more burden on us as we need to also support it and fix bugs.
Because of this we dedicided to remove it for now. It will stay in the master_with_aio_transport branch so we can pick it up later again if it is ever needed.
The API changes made so far turned out to increase the memory footprint
and consumption while our intention was actually decreasing them.
Memory consumption issue:
When there are many connections which does not exchange data frequently,
the old Netty 4 API spent a lot more memory than 3 because it always
allocates per-handler buffer for each connection unless otherwise
explicitly stated by a user. In a usual real world load, a client
doesn't always send requests without pausing, so the idea of having a
buffer whose life cycle if bound to the life cycle of a connection
didn't work as expected.
Memory footprint issue:
The old Netty 4 API decreased overall memory footprint by a great deal
in many cases. It was mainly because the old Netty 4 API did not
allocate a new buffer and event object for each read. Instead, it
created a new buffer for each handler in a pipeline. This works pretty
well as long as the number of handlers in a pipeline is only a few.
However, for a highly modular application with many handlers which
handles connections which lasts for relatively short period, it actually
makes the memory footprint issue much worse.
Changes:
All in all, this is about retaining all the good changes we made in 4 so
far such as better thread model and going back to the way how we dealt
with message events in 3.
To fix the memory consumption/footprint issue mentioned above, we made a
hard decision to break the backward compatibility again with the
following changes:
- Remove MessageBuf
- Merge Buf into ByteBuf
- Merge ChannelInboundByte/MessageHandler and ChannelStateHandler into ChannelInboundHandler
- Similar changes were made to the adapter classes
- Merge ChannelOutboundByte/MessageHandler and ChannelOperationHandler into ChannelOutboundHandler
- Similar changes were made to the adapter classes
- Introduce MessageList which is similar to `MessageEvent` in Netty 3
- Replace inboundBufferUpdated(ctx) with messageReceived(ctx, MessageList)
- Replace flush(ctx, promise) with write(ctx, MessageList, promise)
- Remove ByteToByteEncoder/Decoder/Codec
- Replaced by MessageToByteEncoder<ByteBuf>, ByteToMessageDecoder<ByteBuf>, and ByteMessageCodec<ByteBuf>
- Merge EmbeddedByteChannel and EmbeddedMessageChannel into EmbeddedChannel
- Add SimpleChannelInboundHandler which is sometimes more useful than
ChannelInboundHandlerAdapter
- Bring back Channel.isWritable() from Netty 3
- Add ChannelInboundHandler.channelWritabilityChanges() event
- Add RecvByteBufAllocator configuration property
- Similar to ReceiveBufferSizePredictor in Netty 3
- Some existing configuration properties such as
DatagramChannelConfig.receivePacketSize is gone now.
- Remove suspend/resumeIntermediaryDeallocation() in ByteBuf
This change would have been impossible without @normanmaurer's help. He
fixed, ported, and improved many parts of the changes.
- Use the local transport in a correct way (i.e. no need to trigger channelActive et al by ourselves)
- Use Promise/Future instead of CountDownLatch where they simplifies
- Fixes#1366: No elegant way to free non-in/outbound buffers held by a handler
- handlerRemoved() is now also invoked when a channel is deregistered, as well as when a handler is removed from a pipeline.
- A little bit of clean-up for readability
- Fix a bug in forwardBufferContentAndRemove() where the handler buffers are not freed (mainly because we were relying on channel.isRegistered() to determine if the handler has been removed from inside the handler.
- ChunkedWriteHandler.handlerRemoved() is unnecessary anymore because ChannelPipeline now always forwards the content of the buffer.
This is done by stop accept() new sockets for 1 seconds
Beside this this commit also makes sure accept() exceptions of OioServerSocketChannel trigger
the fireExceptionCaught(...). The same is true fo the AioServerSocketChannel.
- Fixes#1282 (not perfectly, but to the extent it's possible with the current API)
- Add AddressedEnvelope and DefaultAddressedEnvelope
- Make DatagramPacket extend DefaultAddressedEnvelope<ByteBuf, InetSocketAddress>
- Rename ByteBufHolder.data() to content() so that a message can implement both AddressedEnvelope and ByteBufHolder (DatagramPacket does) without introducing two getter methods for the content
- Datagram channel implementations now understand ByteBuf and ByteBufHolder as a message with unspecified remote address.
shutdownGracefully() provides two optional parameters that give more
control over when an executor has to be shut down.
- Related issue: #1307
- Add shutdownGracefully(..) and isShuttingDown()
- Deprecate shutdown() / shutdownNow()
- Replace lastAccessTime with lastExecutionTime and update it after task
execution for accurate quiet period check
- runAllTasks() and runShutdownTasks() update it automatically.
- Add updateLastExecutionTime() so that subclasses can update it
- Add a constructor parameter that tells not to add an unncessary wakeup
task in execute() if addTask() wakes up the executor thread
automatically. Previously, execute() always called wakeup() after
addTask(), which often caused an extra dummy task in the task queue.
- Use shutdownGracefully() wherever possible / Deprecation javadoc
- Reduce the running time of SingleThreadEventLoopTest from 40s to 15s
using custom graceful shutdown parameters
- Other changes made along with this commit:
- takeTask() does not throw InterruptedException anymore.
- Returns null on interruption or wakeup
- Make sure runShutdownTasks() return true even if an exception was
raised while running the shutdown tasks
- Remove unnecessary isShutdown() checks
- Consistent use of SingleThreadEventExecutor.nanoTime()
Replace isWakeupOverridden with a constructor parameter
- Fixes#1308
freeInboundBuffer() and freeOutboundBuffer() were introduced in the early days of the new API when we did not have reference counting mechanism in the buffer. A user did not want Netty to free the handler buffers had to override these methods.
However, now that we have reference counting mechanism built into the buffer, a user who wants to retain the buffers beyond handler's life cycle can simply return the buffer whose reference count is greater than 1 in newInbound/OutboundBuffer().
- Added a test case that reproduces the problem in ReplayingDecoderTest
- Call newHandler.handlerAdded() *before* oldHandler.handlerRemoved() to ensure newHandlerAdded() is called before forwarding the buffer content of the old handler in replace0().
- Fixes#1292
- Replace DefaultChannelPipeline.inbound/outboundShutdown flag with per-context flags
- Update the flags in free() / freeInbound() / freeOutbound() for clarity
- Replace ugly 'prev != null' check with explicit event scheduling
- Fix an incorrect flag operation in freeHandlerBuffersAfterRemoval()
- Fix a bug in AbstractEmbeddedChannel.doRegister where it makes pending tasks immediately, where the pending tasks actually triggers inbound events
- Remove unnecessary suppression of inboundBufferUpdated() event in DefaultChannelPipeline, which potentially hides an event ordering bug. Unfortunately, I don't remember why I added it in cca35454d2.
This change also introduce a few other changes which was needed:
* ChannelHandler.beforeAdd(...) and ChannelHandler.beforeRemove(...) were removed
* ChannelHandler.afterAdd(...) -> handlerAdded(...)
* ChannelHandler.afterRemoved(...) -> handlerRemoved(...)
* SslHandler.handshake() -> SslHandler.hanshakeFuture() as the handshake is triggered automatically after
the Channel becomes active
