Motivation:
Currently when the SslHandler coalesces outbound bytes it always
allocates a direct byte buffer. This does not make sense if the JDK
engine is being used as the bytes will have to be copied back to heap
bytes for the engine to operate on them.
Modifications:
Inspect engine type when coalescing outbound bytes and allocate heap
buffer if heap bytes are preferred by the engine.
Result:
Improved performance for JDK engine. Better performance in environments
without direct buffer pooling.
Motivation:
031c2e2e88 introduced some change to reduce the risk of have the `ReferenceCountedOpenSslContext` be destroyed while the `ReferenceCountedSslEngine` is still in us. Unfortunaly it missed to adjust a few tests which make assumptions about the refCnt of the context.
Modifications:
Adjust tests to take new semenatics into acount.
Result:
No more tests failures
Motivation:
With the Netty ref-counted OpenSSL implementation the parent SslContext
maintains state necessary for the SslEngine's it produces. However, it's
possible for the parent context to be closed and release those resources
before the child engines are finished which causes problems.
Modification:
Spawned ReferenceCountedOpenSslEngine's retain a reference to their
parent ReferenceCountedOpenSslContext.
Result:
The lifetime of the shared data is extended to include the lifetime of
the dependents.
Motivation:
Users can reuse the same FileChannel for different ChunkedNioFile
instances without being worried that FileChannel::position will be
changed concurrently by them.
In addition, FileChannel::read with absolute position allows to
use on *nix pread that is more efficient then fread.
Modifications:
Always use absolute FileChannel::read ops
Result:
Faster and more flexible uses of FileChannel for ChunkedNioFile
Motivation:
Due some bug we did endup with ClassCastExceptions in some cases. Beside this we also did not correctly handle the case when ReferenceCountedOpenSslEngineTest did produce tasks to run in on test.
Modifications:
- Correctly unwrap the engine before to fix ClassCastExceptions
- Run delegated tasks when needed.
Result:
All tests pass with different OpenSSL implementations (OpenSSL, BoringSSL etc)
Motivation:
SystemPropertyUtil already uses the AccessController internally so not need to wrap its usage with AccessController as well.
Modifications:
Remove explicit AccessController usage when SystemPropertyUtil is used.
Result:
Code cleanup
Motivation:
We did not correctly handle taskoffloading when using BoringSSL / OpenSSL. This could lead to the situation that we did not write the SSL alert out for the remote peer before closing the connection.
Modifications:
- Correctly handle exceptions when we resume processing on the EventLoop after the task was offloadded
- Ensure we call SSL.doHandshake(...) to flush the alert out to the outboundbuffer when an handshake exception was detected
- Correctly signal back the need to call WRAP again when a handshake exception is pending. This will ensure we flush out the alert in all cases.
Result:
No more failures when task offloading is used.
Motivation:
When using io.netty.handler.ssl.openssl.useTasks=true we may call ReferenceCountedOpenSslEngine.setKeyMaterial(...) from another thread and so need to synchronize and also check if the engine was destroyed in the meantime to eliminate of the possibility of a native crash.
The same is try when trying to access the authentication methods.
Modification:
- Add synchronized and isDestroyed() checks where missing
- Add null checks for the case when a callback is executed by another thread after the engine was destroyed already
- Move code for master key extraction to ReferenceCountedOpenSslEngine to ensure there can be no races.
Result:
No native crash possible anymore when using io.netty.handler.ssl.openssl.useTasks=true
Motivation:
At the moment it is not possible to build netty on a power 8 systems.
Modifications:
- Improve detection of the possibility of using Conscrypt
- Skip testsuite-shading when not on x86_64 as this is the only platform for which we build tcnative atm
- Only include classifier if on x86_64 for tcnative as dependency as this is the only platform for which we build tcnative atm
- Better detect if UDT test can be run
Result:
Fixes https://github.com/netty/netty/issues/9479
Motivation:
The java doc doesn't match the real case: The exception only happen when a write operation
cannot finish in a certain period of time instead of write idle happen.
Modification:
Correct java doc
Result:
java doc matched the real case
Motivation:
There are some extra log level checks (logger.isWarnEnabled()).
Modification:
Remove log level checks (logger.isWarnEnabled()) from io.netty.channel.epoll.AbstractEpollStreamChannel, io.netty.channel.DefaultFileRegion, io.netty.channel.nio.AbstractNioChannel, io.netty.util.HashedWheelTimer, io.netty.handler.stream.ChunkedWriteHandler and io.netty.channel.udt.nio.NioUdtMessageConnectorChannel
Result:
Fixes#9456
Motivation:
The Netty classes are initialized at build time by default for GraalVM Native Image compilation. This is configured via the `--initialize-at-build-time=io.netty` option. While this reduces start-up time it can lead to some problems:
- The class initializer of `io.netty.buffer.PooledByteBufAllocator` looks at the maximum memory size to compute the size of internal buffers. If the class initializer runs during image generation, then the buffers are sized according to the very large heap size that the image generator uses, and Netty allocates several arrays that are 16 MByte. The fix is to initialize the following 3 classes at run time: `io.netty.buffer.PooledByteBufAllocator,io.netty.buffer.ByteBufAllocator,io.netty.buffer.ByteBufUtil`. This fix was dependent on a GraalVM Native Image fix that was included in 19.2.0.
- The class initializer of `io.netty.handler.ssl.util.ThreadLocalInsecureRandom` needs to be initialized at runtime to ensure that the generated values are trully random and not fixed for each generated image.
- The class initializers of `io.netty.buffer.AbstractReferenceCountedByteBuf` and `io.netty.util.AbstractReferenceCounted` compute field offsets. While the field offset recomputation is necessary for correct execution as a native image these initializers also have logic that depends on the presence/absence of `sun.misc.Unsafe`, e.g., via the `-Dio.netty.noUnsafe=true` flag. The fix is to push these initializers to runtime so that the field offset lookups (and the logic depending on them) run at run time. This way no manual substitutions are necessary either.
Modifications:
Add `META-INF/native-image` configuration files that correctly trigger the inialization of the above classes at run time via `--initialize-at-run-time=...` flags.
Result:
Fixes the initialisation issues described above for Netty executables built with GraalVM.
Motivation:
14607979f6 added tests for using ACCP but did miss to use the same unwrapping technique of exceptions as JdkSslEngineTest. This can lead to test-failures on specific JDK versions
Modifications:
Add the same unwrapping code
Result:
No more test failures
Motivation:
Amazon lately released Amazon Corretto Crypto Provider, so we should include it in our testsuite
Modifications:
Add tests related to Amazon Corretto Crypto Provider
Result:
Test netty with Amazon Corretto Crypto Provider
Motivation:
If all we need is the FileChannel we should better use RandomAccessFile as FileInputStream and FileOutputStream use a finalizer.
Modifications:
Replace FileInputStream and FileOutputStream with RandomAccessFile when possible.
Result:
Fixes https://github.com/netty/netty/issues/8078.
Motivation:
When using OpenSSL and JDK < 11 is used we need to wrap the user provided X509ExtendedTrustManager to be able to support TLS1.3. We had a check in place that first tried to see if wrapping is needed at all which could lead to missleading calls of the user provided trustmanager. We should remove these calls and just always wrap if needed.
Modifications:
Always wrap if OpenSSL + JDK < 11 and TLS1.3 is supported
Result:
Less missleading calls to user provided trustmanager
Motivation:
Users' runtime systems may have incompatible dynamic libraries to the ones our
tcnative wrappers link to. Unfortunately, we cannot determine and catch these
scenarios (in which the JVM crashes) but we can make a more educated guess on
what library to load and try to find one that works better before crashing.
Modifications:
1) Build dynamically linked openSSL builds for more OSs (netty-tcnative)
2) Load native linux libraries with matching classifier (first)
Result:
More developers / users can use the dynamically-linked native libraries.
Motivation
Debugging SSL/TLS connections through wireshark is a pain -- if the cipher used involves Diffie-Hellman then it is essentially impossible unless you can have the client dump out the master key [1]
This is a work-in-progress change (tests & comments to come!) that introduces a new handler you can set on the SslContext to receive the master key & session id. I'm hoping to get feedback if a change in this vein would be welcomed.
An implementation that conforms to Wireshark's NSS key log[2] file is also included.
Depending on feedback on the PR going forward I am planning to "clean it up" by adding documentation, example server & tests. Implementation will need to be finished as well for retrieving the master key from the OpenSSL context.
[1] https://jimshaver.net/2015/02/11/decrypting-tls-browser-traffic-with-wireshark-the-easy-way/
[2] https://developer.mozilla.org/en-US/docs/Mozilla/Projects/NSS/Key_Log_Format
Modification
- Added SslMasterKeyHandler
- An implementation of the handler that conforms to Wireshark's key log format is included.
Result:
Be able to debug SSL / TLS connections more easily.
Signed-off-by: Farid Zakaria <farid.m.zakaria@gmail.com>
Motivation:
Netty homepage(netty.io) serves both "http" and "https".
It's recommended to use https than http.
Modification:
I changed from "http://netty.io" to "https://netty.io"
Result:
No effects.
Motivation:
2c99fc0f12 introduced a change that eagly recycles the queue. Unfortunally it did not correct protect against re-entrance which can cause a NPE.
Modifications:
- Correctly protect against re-entrance by adding null checks
- Add unit test
Result:
Fixes https://github.com/netty/netty/issues/9319.
Motivation:
The AbstractSniHandler previously was willing to tolerate up to three
non-handshake records before a ClientHello that contained an SNI
extension field. This is, so far as I can tell, completely
unnecessary: no TLS implementation will be sending alerts or change
cipher spec messages before ClientHello.
Given that it was not possible to determine why this loop is in
the code to begin with, it's probably just best to remove it.
Modifications:
Remove the for loop.
Result:
The AbstractSniHandler will more rapidly determine whether it should
pass the records on to the default SSL handler.
Co-authored-by: Norman Maurer <norman_maurer@apple.com>
Motivation:
There is some manual coping of elements of Collections which can be replaced by Collections.addAll(...) and also some unnecessary semicolons.
Modifications:
- Simplify branches
- Use Collections.addAll
- Code cleanup
Result:
Code cleanup
Motivation:
I've introduced netty/netty-tcnative#421 that introduced exposing OpenSSL master key & client/server
random values with the purpose of allowing someone to log them to debug the traffic via auxiliary tools like Wireshark (see also #8653)
Modification:
Augmented OpenSslEngineTest to include a test which manually decrypts the TLS ciphertext
after exposing the masterkey + client/server random. This acts as proof that the tc-native new methods work correctly!
Result:
More tests
Signed-off-by: Farid Zakaria <farid.m.zakaria@gmail.com>
Motivation:
Some methods that either override others or are implemented as part of implementation an interface did miss the `@Override` annotation
Modifications:
Add missing `@Override`s
Result:
Code cleanup
Motivation:
asList should only be used if there are multiple elements.
Modification:
Call to asList with only one argument could be replaced with singletonList
Result:
Cleaner code and a bit of memory savings
Motivation:
FlowControlHandler does use a recyclable ArrayDeque internally but only recycles it when the channel is closed. We should better recycle it once it is empty.
Modifications:
Recycle the deque as fast as possible
Result:
Less RecyclableArrayDeque instances.
Motivation:
Traffic shaping needs more accurate execution than scheduled one. So the
use of FixedRate instead.
Moreover the current implementation tends to create as many threads as
channels use a ChannelTrafficShapingHandlern, which is unnecessary.
Modifications:
Change the executor.schedule to executor.scheduleAtFixedRate in the
start and remove the reschedule call from run monitor thread since it
will be restarted by the Fixed rate executor.
Also fix a minor bug where restart was only doing start() without stop()
before.
Result:
Threads are more stable in number of cached and precision of traffic
shaping is enhanced.
Motivation:
SslHandler must generate control data as part of the TLS protocol, for example
to do handshakes. SslHandler doesn't capture the status of the future
corresponding to the writes when writing this control (aka non-application
data). If there is another handler before the SslHandler that wants to fail
these writes the SslHandler will not detect the failure and we must wait until
the handshake timeout to detect a failure.
Modifications:
- SslHandler should detect if non application writes fail, tear down the
channel, and clean up any pending state.
Result:
SslHandler detects non application write failures and cleans up immediately.
Motivation
SSL unit tests started failing for me (RHEL 7.6) after #9162. It looks
like the intention was to prevent disable use of the
io.netty.handler.ssl.openssl.useKeyManagerFactory property when using
BoringSSL, but it now gets set to false in that case rather than the
prior/non-BoringSSL default of true.
Modification
Set useKeyManagerFactory to true rather than false in BoringSSL case
during static init of OpenSSl class.
Result
Tests pass again.
Motivation:
How we tried to detect if KeyManagerFactory is supported was not good enough for OpenSSL 1.1.0+ as it partly provided the API but not all of what is required.
This then lead to failures like:
[ERROR] Tests run: 1, Failures: 0, Errors: 1, Skipped: 0, Time elapsed: 1.102 s <<< FAILURE! - in io.netty.channel.epoll.EpollDomainSocketStartTlsTest
[ERROR] initializationError(io.netty.channel.epoll.EpollDomainSocketStartTlsTest) Time elapsed: 0.016 s <<< ERROR!
javax.net.ssl.SSLException: failed to set certificate and key
at io.netty.handler.ssl.ReferenceCountedOpenSslServerContext.newSessionContext(ReferenceCountedOpenSslServerContext.java:130)
at io.netty.handler.ssl.OpenSslServerContext.<init>(OpenSslServerContext.java:353)
at io.netty.handler.ssl.OpenSslServerContext.<init>(OpenSslServerContext.java:334)
at io.netty.handler.ssl.SslContext.newServerContextInternal(SslContext.java:468)
at io.netty.handler.ssl.SslContextBuilder.build(SslContextBuilder.java:457)
at io.netty.testsuite.transport.socket.SocketStartTlsTest.data(SocketStartTlsTest.java:93)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:498)
at org.junit.runners.model.FrameworkMethod$1.runReflectiveCall(FrameworkMethod.java:50)
at org.junit.internal.runners.model.ReflectiveCallable.run(ReflectiveCallable.java:12)
at org.junit.runners.model.FrameworkMethod.invokeExplosively(FrameworkMethod.java:47)
at org.junit.runners.Parameterized.allParameters(Parameterized.java:280)
at org.junit.runners.Parameterized.<init>(Parameterized.java:248)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:62)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
at java.lang.reflect.Constructor.newInstance(Constructor.java:423)
at org.junit.internal.builders.AnnotatedBuilder.buildRunner(AnnotatedBuilder.java:104)
at org.junit.internal.builders.AnnotatedBuilder.runnerForClass(AnnotatedBuilder.java:86)
at org.junit.runners.model.RunnerBuilder.safeRunnerForClass(RunnerBuilder.java:59)
at org.junit.internal.builders.AllDefaultPossibilitiesBuilder.runnerForClass(AllDefaultPossibilitiesBuilder.java:26)
at org.junit.runners.model.RunnerBuilder.safeRunnerForClass(RunnerBuilder.java:59)
at org.junit.internal.requests.ClassRequest.getRunner(ClassRequest.java:33)
at org.apache.maven.surefire.junit4.JUnit4Provider.execute(JUnit4Provider.java:362)
at org.apache.maven.surefire.junit4.JUnit4Provider.executeWithRerun(JUnit4Provider.java:273)
at org.apache.maven.surefire.junit4.JUnit4Provider.executeTestSet(JUnit4Provider.java:238)
at org.apache.maven.surefire.junit4.JUnit4Provider.invoke(JUnit4Provider.java:159)
at org.apache.maven.surefire.booter.ForkedBooter.invokeProviderInSameClassLoader(ForkedBooter.java:384)
at org.apache.maven.surefire.booter.ForkedBooter.runSuitesInProcess(ForkedBooter.java:345)
at org.apache.maven.surefire.booter.ForkedBooter.execute(ForkedBooter.java:126)
at org.apache.maven.surefire.booter.ForkedBooter.main(ForkedBooter.java:418)
Caused by: java.lang.Exception: Requires OpenSSL 1.0.2+
at io.netty.internal.tcnative.SSLContext.setCertificateCallback(Native Method)
at io.netty.handler.ssl.ReferenceCountedOpenSslServerContext.newSessionContext(ReferenceCountedOpenSslServerContext.java:126)
... 32 more
Modifications:
Also try to set the certification callback and only if this works as well mark KeyManagerFactory support as enabled.
Result:
Also correctly work when OpenSSL 1.1.0 is used.
Motivation:
When we added support for KeyManagerFactory we also allowed to disable it to make the change less risky. This was done years ago and so there is really no need to use the property anyway.
Unfortunally due a change in netty-tcnative it is even not supported anymore when using BoringSSL.
Modifications:
- Log an info message to tell users that 'io.netty.handler.ssl.openssl.useKeyManagerFactory' is deprecated when it is used
- Ignore 'io.netty.handler.ssl.openssl.useKeyManagerFactory' when BoringSSL is used.
Result:
Fixes https://github.com/netty/netty/issues/9147.
Motivation:
OOME is occurred by increasing suppressedExceptions because other libraries call Throwable#addSuppressed. As we have no control over what other libraries do we need to ensure this can not lead to OOME.
Modifications:
Only use static instances of the Exceptions if we can either dissable addSuppressed or we run on java6.
Result:
Not possible to OOME because of addSuppressed. Fixes https://github.com/netty/netty/issues/9151.
Motivation:
Depending on what OpenSSL library version we use / system property that is set we need to skip tests that use KeyManagerFactory.
Modifications:
Add missing assume checks for tests that use KeyManagerFactory.
Result:
All tests pass even if KeyManagerFactory is not supported
Motivation:
Previously, any 'relative' pipeline operations, such as
ctx.pipeline().replace(), .addBefore(), addAfter(), etc
would fail as the handler was not present in the pipeline.
Modification:
Used the pattern from ChannelInitializer when invoking configurePipeline().
Result:
Fixes#9131
Motivation:
As brought up in https://github.com/netty/netty/issues/8998, JKS can be substantially faster than pkcs12, JDK's new default. Without an option to set the KeyStore type you must change the configuration of the entire JVM which is impractical.
Modification:
- Allow to specify KeyStore type
- Add test case
Result:
Fixes https://github.com/netty/netty/issues/8998.
