Commit Graph

361 Commits

Author SHA1 Message Date
Norman Maurer
2d48ec4e3f Correctly set writerIndex when EpollChannelOption.MAX_DATAGRAM_PAYLOAD_SIZE is used in all cases (#9819)
Motivation:

Due a bug we did not correctly set the writerIndex of the ByteBuf when a
user specified EpollChannelOption.MAX_DATAGRAM_PAYLOAD_SIZE but we ended
up with a non scattering read.

Modifications:

- Set writerIndex to the correct value
- Add unit tests

Result:

Fixes https://github.com/netty/netty/issues/9788
2019-11-28 09:06:13 +01:00
Norman Maurer
3add35fe82 Remove dependency on GLIBC 2.12 by using syscalls directly (#9797)
Motivation:

394a1b3485 introduced a hard dependency on GLIBC 2.12 which was not the case before. This had the effect of not be able to use the native epoll transports on platforms which ship with earlier versions of GLIBC.
To make things a backward compatible as possible we should not introduce such changes in a bugfix release.

Special thanks to @weissi with all the help to fix this.

Modifications:

- Use syscalls directly to remove dependency on GLIBC 2.12
- Make code consistent that needs newer GLIBC versions
- Adjust scattering read test to only run if recvmmsg syscall is supported
- Cleanup pom.xml as some stuff is not needed anymore after using syscalls.

Result:

Fixes https://github.com/netty/netty/issues/9758.
2019-11-23 21:17:39 +01:00
Nick Hill
7df012884f Rename SimpleChannelInboundHandler.channelRead0() to messageReceived() (#8819)
Motivation

Per javadoc in 4.1.x SimpleChannelInboundHandler:

"Please keep in mind that channelRead0(ChannelHandlerContext, I) will be
renamed to messageReceived(ChannelHandlerContext, I) in 5.0."

Modifications

Rename aforementioned method and all references/overrides.

Result

Method is renamed.
2019-11-01 07:23:07 +01:00
Norman Maurer
ec8e8bd515
Fix event loop shutdown timing fragility (#9639)
Motivation

The current event loop shutdown logic is quite fragile and in the
epoll/NIO cases relies on the default 1 second wait/select timeout that
applies when there are no scheduled tasks. Without this default timeout
the shutdown would hang indefinitely.

The timeout only takes effect in this case because queued scheduled
tasks are first cancelled in
SingleThreadEventExecutor#confirmShutdown(), but I _think_ even this
isn't robust, since the main task queue is subsequently serviced which
could result in some new scheduled task being queued with much later
deadline.

It also means shutdowns are unnecessarily delayed by up to 1 second.

Modifications

- Add/extend unit tests to expose the issue
- Adjust SingleThreadEventExecutor shutdown and confirmShutdown methods
to explicitly add no-op tasks to the taskQueue so that the subsequent
event loop iteration doesn't enter blocking wait (as looks like was
originally intended)

Results

Faster and more robust shutdown of event loops, allows removal of the default wait timeout.
This is a port of https://github.com/netty/netty/pull/9616
2019-10-08 12:00:59 +04:00
Ran
4a5bff2d42 Initialize dynamicMethods before use (#9618)
Motivation:

There is a goto statement above the current position of initialize dynamicMethods, and dynamicMethods is used after the goto which might cause undefined behavior.

Modifications:

Initialize dynamicMehtods at the top.

Result:

No more undefined behavior.
2019-10-08 09:59:54 +02:00
Nick Hill
0eb363de94 Close eventfd shutdown/wakeup race by closely tracking epoll edges (#9586) (#9612)
Motivation

This is another iteration of #9476.

Modifications

Instead of maintaining a count of all writes performed and then using
reads during shutdown to ensure all are accounted for, just set a flag
after each write and don't reset it until the corresponding event has
been returned from epoll_wait.

This requires that while a write is still pending we don't reset
wakenUp, i.e. continue to block writes from the wakeup() method.

Result

Race condition eliminated. Fixes #9362


Co-authored-by: Norman Maurer <norman_maurer@apple.com>
2019-09-27 09:55:44 +02:00
Norman Maurer
1275cfd8f8
Add *ReceiveBufferSize / *SendBufferSize methods to DomainSocketChannelConfig interface (#9602)
Motivation:

aebe206 added support for using a ChannelOption to set / get Buffer sizes but did not add the methods to the DomainSocketChannelConfig interface itself (due not be able to break the API)

Modifications:

Add methods to interface (as this is a next major release)

Result:

Easier access to configure these buffer sizes
2019-09-26 08:58:22 +02:00
Norman Maurer
15eef2425a Cleanup JNI code to always correctly free memory when loading fails and also correctly respect out of memory in all cases (#9596)
Motivation:

At the moment we not consistently (and also not correctly) free allocated native memory in all cases during loading the JNI library. This can lead to native memory leaks in the unlikely case of failure while trying to load the library.

Beside this we also not always correctly handle the case when a new java object can not be created in native code because of out of memory.

Modification:

- Copy some macros from netty-tcnative to be able to handle errors in a more easy fashion
- Correctly account for New* functions to return NULL
- Share code

Result:

More robust and clean JNI code
2019-09-24 07:23:50 +02:00
Joe Ellis
bf52f39e59 Allow domain sockets to configure SO_SNDBUF and SO_RCVBUF (#9584)
Motivation:

Running tests with a `KQueueDomainSocketChannel` showed worse performance than an `NioSocketChannel`. It turns out that the default send buffer size for Nio sockets is 64k while for KQueue sockets it's 8k. I verified that manually setting the socket's send buffer size improved perf to expected levels.

Modification:

Plumb the `SO_SNDBUF` and `SO_RCVBUF` options into the `*DomainSocketChannelConfig`.

Result:

Can now configure send and receive buffer sizes for domain sockets.
2019-09-20 22:33:45 +02:00
Norman Maurer
1b06de76c9 Correctly reset cached local and remote address when disconnect() is called (#9545)
Motivation:

We should correctly reset the cached local and remote address when a Channel.disconnect() is called and the channel has a notion of disconnect vs close (for example DatagramChannel implementations).

Modifications:

- Correctly reset cached kicak abd remote address
- Update testcase to cover it and so ensure all transports work in a consistent way

Result:

Correctly handle disconnect()
2019-09-19 08:51:23 +02:00
Norman Maurer
19a12fba4c Correctly handle IPV6-mapped-IPV4 addresses in native code when receiving datagrams (#9560)
Motivation:

291f80733a introduced a change to use a byte[] to construct the InetAddress when receiving datagram messages to reduce the overhead. Unfortunally it introduced a regression when handling IPv6-mapped-IPv4 addresses and so produced an IndexOutOfBoundsException when trying to fill the byte[] in native code.

Modifications:

- Correctly use the offset on the pointer of the address.
- Add testcase
- Make tests more robust and include more details when the test fails

Result:

No more IndexOutOfBoundsException
2019-09-11 20:31:50 +02:00
Norman Maurer
acaa29f508 Add support for recvmmsg(...) even with connected datagram channels w… (#9539)
Motivation:

394a1b3485 added support for recvmmsg(...) for unconnected datagram channels, this change also allows to use recvmmsg(...) with connected datagram channels.

Modifications:

- Always try to use recvmmsg(...) if configured to do so
- Adjust unit test to cover it

Result:

Less syscalls when reading datagram packets
2019-09-06 20:59:24 +02:00
Norman Maurer
82c330e8a5 Also support sendmmsg(...) on connected UDP channels when using native epoll transport (#9536)
Motivation:

We should also use sendmmsg on connected channels whenever possible to reduce the overhead of syscalls.

Modifications:

No matter if the channel is connected or not try to use sendmmsg when supported to reduce the overhead of syscalls

Result:

Better performance on connected UDP channels due less syscalls
2019-09-06 20:57:50 +02:00
Norman Maurer
d57a5f5d4f Correctly handle ipv6 mapped ipv4 addresses when using recvmmsg (#9541)
Motivation:

394a1b3485 introduced the possibility to use recvmmsg(...) but did not correctly handle ipv6 mapped ip4 addresses to make it consistent with other transports.

Modifications:

- Correctly handle ipv6 mapped ipv4 addresses by only copy over the relevant bytes
- Small improvement on how to detect ipv6 mapped ipv4 addresses by using memcmp and not byte by byte compare
- Adjust test to cover this bug

Result:

Correctly handle ipv6 mapped ipv4 addresses
2019-09-06 13:55:35 +02:00
Norman Maurer
b3e6e41384 Add support for recvmmsg when using epoll transport (#9509)
Motivation:

When using datagram sockets which need to handle a lot of packets it makes sense to use recvmmsg to be able to read multiple datagram packets with one syscall.

Modifications:

- Add support for recvmmsg on linux
- Add new EpollChannelOption.MAX_DATAGRAM_PACKET_SIZE
- Add tests

Result:

Fixes https://github.com/netty/netty/issues/8446.
2019-09-03 09:35:21 +02:00
Xiaoqin Fu
88aa12cc1a Remove extra checks to fix #9456 (#9523)
Motivation:

There are some extra log level checks (logger.isWarnEnabled()).

Modification:

Remove log level checks (logger.isWarnEnabled()) from io.netty.channel.epoll.AbstractEpollStreamChannel, io.netty.channel.DefaultFileRegion, io.netty.channel.nio.AbstractNioChannel, io.netty.util.HashedWheelTimer, io.netty.handler.stream.ChunkedWriteHandler and io.netty.channel.udt.nio.NioUdtMessageConnectorChannel

Result:

Fixes #9456
2019-08-30 10:40:04 +02:00
Nick Hill
250b279bd9 Epoll: Avoid redundant EPOLL_CTL_MOD calls (#9397)
Motivation

Currently an epoll_ctl syscall is made every time there is a change to
the event interest flags (EPOLLIN, EPOLLOUT, etc) of a channel. These
are only done in the event loop so can be aggregated into 0 or 1 such
calls per channel prior to the next call to epoll_wait.

Modifications

I think further streamlining/simplification is possible but for now I've
tried to minimize structural changes and added the aggregation beneath
the existing flag manipulation logic.

A new AbstractChannel#activeFlags field records the flags last set on
the epoll fd for that channel. Calls to setFlag/clearFlag update the
flags field as before but instead of calling epoll_ctl immediately, just
set or clear a bit for the channel in a new bitset in the associated
EpollEventLoop to reflect whether there's any change to the last set
value.

Prior to calling epoll_wait the event loop makes the appropriate
epoll_ctl(EPOLL_CTL_MOD) call once for each channel who's bit is set.

Result

Fewer syscalls, particularly in some auto-read=false cases. Simplified
error handling from centralization of these calls.
2019-08-19 09:06:41 +02:00
violetagg
a4c9fb7729 Do not cache local/remote address when creating EpollDatagramChannel with InternetProtocolFamily (#9436)
Motivation:

EpollDatagramChannel#localAddress returns wrong information when
EpollDatagramChannel is created with InternetProtocolFamily,
and EpollDatagramChannel#localAddress is invoked BEFORE the actual binding.

This is a regression caused by change
e17ce934da

Modifications:

EpollDatagramChannel() and EpollDatagramChannel(InternetProtocolFamily family)
do not cache local/remote address

Result:

Rebinding on the same address without "reuse port" works
EpollDatagramChannel#localAddress returns correct address
2019-08-11 09:09:26 +02:00
Norman Maurer
9ebb6b6b56 Add testcase to prove that ET semantics for eventFD are correct (#9385)
Motivation:

We recently made a change to use ET for the eventfd and not trigger a read each time. This testcase proves everything works as expected.

Modifications:

Add testcase that verifies thqat the wakeups happen correctly

Result:

More tests
2019-07-17 12:29:10 +02:00
Nick Hill
afbbc11c8f Fix epoll spliceTo file descriptor with offset (#9369)
Motivation

The AbstractEpollStreamChannel::spliceTo(FileDescriptor, ...) methods
take an offset parameter but this was effectively ignored due to what
looks like a typo in the corresponding JNI function impl. Instead it
would always use the file's own native offset.

Modification

- Fix typo in netty_epoll_native_splice0() and offset accounting in
AbstractEpollStreamChannel::SpliceFdTask.
- Modify unit test to include an invocation of the public spliceTo
method using non-zero offset.

Result

spliceTo FD methods work as expected when an offset is provided.
2019-07-16 13:23:36 +02:00
Nick Hill
a6abff75a6 Epoll: Don't wake event loop when splicing (#9354)
Motivation

I noticed this while looking at something else.
AbstractEpollStreamChannel::spliceQueue is an MPSC queue but only
accessed from the event loop. So it could be just changed to e.g. an
ArrayDeque. This PR instead reverts to using is as an MPSC queue to
avoid dispatching a task to the EL, as appears was the original
intention.

Modification

Change AbstractEpollStreamChannel::spliceQueue to be volatile and lazily
initialized via double-checked locking. Add tasks directly to the queue
from the public methods rather than possibly waking the EL just to
enqueue.

An alternative is just to change PlatformDependent.newMpscQueue() to new
ArrayDeque() and be done with it :)

Result

Less disruptive channel/fd-splicing.
2019-07-12 18:14:06 +02:00
jingene
af614e4d6e Change the netty.io homepage scheme(http -> https) (#9344)
Motivation:

Netty homepage(netty.io) serves both "http" and "https".
It's recommended to use https than http.
Modification:

I changed from "http://netty.io" to "https://netty.io"
Result:

No effects.
2019-07-09 21:10:14 +02:00
Carl Mastrangelo
dfa69f0980 Unconditionally initialize sockaddrs in epoll linuxsocket (#9299)
Motivation:

Compiling with -Werror,-Wuninitialized complains about the sockaddrs being uninitialized.
I believe this is because the init function netty_unix_socket_initSockaddr is in a
separate compilation unit.  Since this code isn't on the criticial path, it's easy
to just memset the variables rather than suppress the warning.

Modification:
Always clear the sockaddrs, even if they will be initialized later.

Result:
Able to compile with warnings turned on
2019-06-29 12:18:42 +02:00
jimin
78adeb5408 All override methods must be added @override (#9285)
Motivation:

Some methods that either override others or are implemented as part of implementation an interface did miss the `@Override` annotation

Modifications:

Add missing `@Override`s

Result:

Code cleanup
2019-06-27 13:52:06 +02:00
jimin
411b6a56b5 remove unused imports (#9287)
Motivation:

Some imports are not used

Modification:

remove unused imports

Result:

Code cleanup
2019-06-26 21:16:16 +02:00
Norman Maurer
9d5420987a Add support for loopbackmode and accessing the configured interface when using epoll native transport with multicast (#9218)
Motivation:

We did not have support for enable / disable loopback mode in our native epoll transport and also missed the implemention to access the configured interface.

Modifications:

Add implementation and adjust test to cover it

Result:

More complete multicast support with native epoll transport
2019-06-07 13:45:45 -07:00
Carl Mastrangelo
f01278616a Properly debounce wakeups (#9191)
Motivation:
The wakeup logic in EpollEventLoop is overly complex

Modification:
* Simplify the race to wakeup the loop
* Dont let the event loop wake up itself (it's already awake!)
* Make event loop check if there are any more tasks after preparing to
sleep.  There is small window where the non-eventloop writers can issue
eventfd writes here, but that is okay.

Result:
Cleaner wakeup logic.

Benchmarks:

```
BEFORE
Benchmark                                   Mode  Cnt       Score      Error  Units
EpollSocketChannelBenchmark.executeMulti   thrpt   20  408381.411 ± 2857.498  ops/s
EpollSocketChannelBenchmark.executeSingle  thrpt   20  157022.360 ± 1240.573  ops/s
EpollSocketChannelBenchmark.pingPong       thrpt   20   60571.704 ±  331.125  ops/s

Benchmark                                   Mode  Cnt       Score      Error  Units
EpollSocketChannelBenchmark.executeMulti   thrpt   20  440546.953 ± 1652.823  ops/s
EpollSocketChannelBenchmark.executeSingle  thrpt   20  168114.751 ± 1176.609  ops/s
EpollSocketChannelBenchmark.pingPong       thrpt   20   61231.878 ±  520.108  ops/s
```
2019-06-04 05:27:15 -07:00
Norman Maurer
63f7854c1e Don't read from timerfd and eventfd on each EventLoop tick (#9192)
Motivation:

We do not need to issue a read on timerfd and eventfd when the EventLoop wakes up if we register these as Edge-Triggered. This removes the overhead of 2 syscalls and so helps to reduce latency.

Modifications:

- Ensure we register the timerfd and eventfd with EPOLLET flag
- If eventfd_write fails with EAGAIN, call eventfd_read and try eventfd_write again as we only use it as wake-up mechanism.

Result:

Less syscalls and so reducing overhead.

Co-authored-by: Carl Mastrangelo <carl@carlmastrangelo.com>
2019-05-31 07:00:44 +02:00
Norman Maurer
f966a0a041 Correctly detect InternetProtocolFamily when EpollDatagramChannel is created with existing FileDescriptor (#9185)
Motivation:

When EpollDatagramChannel is created with an existing FileDescriptor we should detect the correct InternetProtocolFamily.

Modifications:

Obtain the InternetProtocolFamily from the given FD

Result:

Use correct InternetProtocolFamily when EpollDatagramChannel is created via existing FileDescriptor
2019-05-26 20:30:05 +02:00
Steve Buzzard
33d1a91083 Added UDP multicast (with caveats: getInterface, getNetworkInterface, block or loopback-mode-disabled operations).
Motivation:

Provide epoll/native multicast to support high load multicast users (we are using it for a high load telecomm app at my day job).

Modification:

Added support for source specific and any source multicast for epoll transport. Some caveats: no support for disabling loop back mode, retrieval of interface and block operation, all of which tend to be less frequently used.

Result:

Provides epoll transport multicast for common use cases.

Co-authored-by: Norman Maurer <norman_maurer@apple.com>
2019-05-25 10:06:13 +02:00
Julien Viet
f85583047e KQueueEventLoop | EpollEventLoop may incorrectly update registration when FD is reused.
Motivation:

The current KQueueEventLoop implementation does not process concurrent domain socket channel registration/unregistration in the order they actual
happen since unregistration are delated by an event loop task scheduling. When a domain socket is closed, it's file descriptor might be reused
quickly and therefore trigger a new channel registration using the same descriptor.

Consequently the KQueueEventLoop#add(AbstractKQueueChannel) method will overwrite the current inactive channels having the same descriptor
and the delayed KQueueEventLoop#remove(AbstractKQueueChannel) will remove the active channel that replaced the inactive one.

As active channels are registered, events for this file descriptor won't be processed anymore and the channels will never be closed.

The same problem can also happen in EpollEventLoop. Beside this we also may never remove the AbstractEpollChannel from the internal map
when it is unregistered which will prevent it from be GC'ed

Modifications:

- Change logic of native KQueue and Epoll implementations to ensure we correctly handle the case of FD reuse
- Only try to update kevent / epoll if the Channel is still open (as otherwise it will be handled by kqueue / epoll itself)
- Correctly remove AbstractEpollChannel from internal map in all cases
- Make implementation of closeAll() consistent for Epoll and KQueueEventLoop

Result:

KQueue and Epoll native transports correctly handle FD reuse

Co-authored-by: Norman Maurer <norman_maurer@apple.com>
2019-05-22 10:11:42 +02:00
Norman Maurer
ed61e5f543 Only use static Exception instances when we can ensure addSuppressed … (#9152)
Motivation:

OOME is occurred by increasing suppressedExceptions because other libraries call Throwable#addSuppressed. As we have no control over what other libraries do we need to ensure this can not lead to OOME.

Modifications:

Only use static instances of the Exceptions if we can either dissable addSuppressed or we run on java6.

Result:

Not possible to OOME because of addSuppressed. Fixes https://github.com/netty/netty/issues/9151.
2019-05-17 22:42:53 +02:00
Nick Hill
d9c23a1e5b Remove static wildcard imports in EpollDomainSocketChannelConfig (#9066)
Motivation

These aren't needed, only one field from each class is used. It also showed as an ambiguous identifier compilation error in my IDE even though javac is obviously fine with it.

Modifications

Static-import explicit ChannelOption fields in EpollDomainSocketChannelConfig instead of using .* wildcard.

Result

Cleaner / more consistent code.
2019-04-18 07:34:08 +02:00
Nick Hill
7f79182c82 Have (Epoll|KQueue)RecvByteAllocatorHandle extend DelegatingHandle (#9060)
Motivation

These implementations delegate most of their methods to an existing Handle and previously extended RecvByteBufAllocator.DelegatingHandle. This was reverted in #6322 with the introduction of ExtendedHandle but it's not clear to me why it needed to be - the code looks a lot cleaner.

Modifications

Have (Epoll|KQueue)RecvByteAllocatorHandle extend DelegatingHandle again, while still implementing ExtendedHandle.

Result

Less code.
2019-04-16 09:21:43 +02:00
Norman Maurer
bbb9ea69e5 Revert "Added UDP multicast (with caveats: no ipv6, getInterface, getNetworkI… (#9006)"
This reverts commit a3e8c86741 as there are some issues that need to be fixed first.
2019-04-12 21:33:25 +02:00
Norman Maurer
42680bc021 Throw IOException (not ChannelException) if netty_epoll_linuxsocket_setTcpMd5Sig fails (#9039)
Motivation:

At the moment we throw a ChannelException if netty_epoll_linuxsocket_setTcpMd5Sig fails. This is inconsistent with other methods which throw a IOException.

Modifications:

Throw IOException

Result:

More correct and consistent exception usage in epoll transport
2019-04-12 15:15:52 +02:00
Norman Maurer
9ef5c0946a Add IPv6 multicast test to testsuite (#9037)
Motivation:

We currently only cover ipv4 multicast in the testsuite but we should also have tests for ipv6.

Modifications:

- Add test for ipv6
- Ensure we only try to run multicast test for ipv4 / ipv6 if the loopback interface supports it.

Result:

Better test coverage
2019-04-12 14:26:09 +02:00
Norman Maurer
e00e06c037 netty_epoll_linuxsocket_setTcpMd5Sig should throw ChannelException when not able to init sockaddr
Motivation:

When netty_epoll_linuxsocket_setTcpMd5Sig fails to init the sockaddr we should throw an exception and not silently return.

Modifications:

Throw exception if init of sockaddr fails.

Result:

Correctly report back error to user.
2019-04-11 18:52:33 +02:00
Norman Maurer
7c35781f4d
DefaultPromise may throw checked exceptions that are not advertised (#8995)
Motivation:

We should not throw check exceptions when the user calls sync*() but should better wrap it in a CompletionException to make it easier for people to reason about what happens.

Modifications:

- Change sync*() to throw CompletionException
- Adjust tests
- Add some more tests

Result:

Fixes https://github.com/netty/netty/issues/8521.
2019-04-10 07:15:31 +02:00
Steve Buzzard
5e8fdf06bc Added UDP multicast (with caveats: no ipv6, getInterface, getNetworkI… (#9006)
…nterface, block or loopback-mode-disabled operations).


Motivation:

Provide epoll/native multicast to support high load multicast users (we are using it for a high load telecomm app at my day job).

Modification:

Added support for (ipv4 only) source specific and any source multicast for epoll transport. Some caveats (beyond no ipv6 support initially - there’s a bit of work to add in join and leave group specifically around SSM, as ipv6 uses different data structures for this): no support for disabling loop back mode, retrieval of interface and block operation, all of which tend to be less frequently used.

Result:

Provides epoll transport multicast for IPv4 for common use cases. Understand if you’d prefer to hold off until ipv6 is included but not sure when I’ll be able to get to that.
2019-04-08 20:14:07 +02:00
Norman Maurer
0f34345347
Merge ChannelInboundHandler and ChannelOutboundHandler into ChannelHa… (#8957)
Motivation:

In 42742e233f we already added default methods to Channel*Handler and deprecated the Adapter classes to simplify the class hierarchy. With this change we go even further and merge everything into just ChannelHandler. This simplifies things even more in terms of class-hierarchy.

Modifications:

- Merge ChannelInboundHandler | ChannelOutboundHandler into ChannelHandler
- Adjust code to just use ChannelHandler
- Deprecate old interfaces.

Result:

Cleaner and simpler code in terms of class-hierarchy.
2019-03-28 09:28:27 +00:00
Norman Maurer
6297f183a3 Upgrade to new netty-build and com.puppycrawl.tools 8.18 (#8980)
Motivation:

com.puppycrawl.tools checkstyle < 8.18 was reported to contain a possible security flaw. We should upgrade.

Modifications:

- Upgrade netty-build and checkstyle.
- Fix checkstyle errors

Result:

Fixes https://github.com/netty/netty/issues/8968.
2019-03-26 14:22:06 +01:00
Lunfu Zhong
238018e4ea Support ALLOW_HALF_CLOSURE channel option on Unix domain socket. (#8932)
Motivation:

Since DomainSocketChannel is a DuplexChannel,  which be able to shutdown input or output individually on demands, but ALLOW_HALF_CLOSURE channel option has not been supported yet.

I thought this could be a missing feature of Unix domain socket, so here the PR for it.

Modifications:

1. Added allHalfClosure property both in  EpollDomainSocketChannelConfig and KQueueDomainSocketChannelConfig,
2. Enabled isAllowHalfClosure method of native channel to support domain channel config,
3. Created EpollDomainSocketShutdownOutputByPeerTest and KQueueDomainSocketShutdownOutputByPeerTest to verify the change.

Result:

ALLOW_HALF_CLOSURE channel option can be set with DomainSocketChannel, and no more warning of Unknown channel option 'ALLOW_HALF_CLOSURE'.
2019-03-19 11:37:54 +01:00
Norman Maurer
42742e233f
Deprecate ChannelInboundHandlerAdapter and ChannelOutboundHandlerAdapter (#8929)
Motivation:

As we now us java8 as minimum java version we can deprecate ChannelInboundHandlerAdapter / ChannelOutboundHandlerAdapter and just move the default implementations into the interfaces. This makes things a bit more flexible for the end-user and also simplifies the class-hierarchy.

Modifications:

- Mark ChannelInboundHandlerAdapter and ChannelOutboundHandlerAdapter as deprecated
- Add default implementations to ChannelInboundHandler / ChannelOutboundHandler
- Refactor our code to not use ChannelInboundHandlerAdapter / ChannelOutboundHandlerAdapter anymore

Result:

Cleanup class-hierarchy and make things a bit more flexible.
2019-03-13 09:46:10 +01:00
Norman Maurer
106bd0c091 DefaultFileRegion.transferTo with invalid count may cause busy-spin (#8885)
Motivation:

`DefaultFileRegion.transferTo` will return 0 all the time when we request more data then the actual file size. This may result in a busy spin while processing the fileregion during writes.

Modifications:

- If we wrote 0 bytes check if the underlying file size is smaller then the requested count and if so throw an IOException
- Add DefaultFileRegionTest
- Add a test to the testsuite

Result:

Fixes https://github.com/netty/netty/issues/8868.
2019-02-26 11:21:03 +01:00
Norman Maurer
b9d277dbcb Support using an Executor to offload blocking / long-running tasks wh… (#8847)
Motivation:

The SSLEngine does provide a way to signal to the caller that it may need to execute a blocking / long-running task which then can be offloaded to an Executor to ensure the I/O thread is not blocked. Currently how we handle this in SslHandler is not really optimal as while we offload to the Executor we still block the I/O Thread.

Modifications:

- Correctly support offloading the task to the Executor while suspending processing of SSL in the I/O Thread
- Add new methods to SslContext to specify the Executor when creating a SslHandler
- Remove @deprecated annotations from SslHandler constructor that takes an Executor
- Adjust tests to also run with the Executor to ensure all works as expected.

Result:

Be able to offload long running tasks to an Executor when using SslHandler. Partly fixes https://github.com/netty/netty/issues/7862 and https://github.com/netty/netty/issues/7020.
2019-02-11 10:00:55 +01:00
Norman Maurer
a2ccc287c3 Add more tests to KQueue and Epoll testsuites. (#8851)
Motivation:

We missed to extend a few tests from the testsuite and so also run these with our native KQueue and Epoll transport.

Modifications:

Extend tests and so run these for our native transports as well.

Result:

More tests.
2019-02-08 20:12:29 +01:00
田欧
e8efcd82a8 migrate java8: use requireNonNull (#8840)
Motivation:

We can just use Objects.requireNonNull(...) as a replacement for ObjectUtil.checkNotNull(....)

Modifications:

- Use Objects.requireNonNull(...)

Result:

Less code to maintain.
2019-02-04 10:32:25 +01:00
Norman Maurer
d96c02fc68 Reduce direct memory overhead per EpollEventLoop when using EpollDatagramChannel (#8825)
Motivation:

When using a linux distribution that supports sendmmsg(...) we allocated enough direct memory per EpollEventLoop to be able to write IOV_MAX number of iovecs per message that can be written per sendmmsg.
The number of messages that can be written per sendmmsg(...) call is limited by UIO_MAX_IOV.

In practice this resulted in an allocation of 16MB direct memory per EpollEventLoop instance that stayed allocated until the EpollEventLoop was shutdown which happens as part of the shutdown of the enclosing EpollEVentLoopGroup.

This resulted in quite some heavy direct memory usage in practice even when in practice we have very slim changes to ever need all of the memory.

Modification:

Adjust NativeDatagramPacketArray to share one IovArray instance across all NativeDatagramPacket instances it holds. This limits the max number of iovecs we can write across all messages to IOV_MAX per sendmmsg(...) call.
This in practice will still be enough to allow us to write multiple messages with one syscall while keep the memory overhead to a minimum.

Result:

Smaller direct memory footprint per EpollEventLoop when using EpollDatagramChannel on distributions that support sendmmsg(...).
Fixes https://github.com/netty/netty/issues/8814
2019-02-02 07:14:53 +01:00
Norman Maurer
99face616a Reduce GC produced by native DatagramChannel implementations when in connected mode. (#8806)
Motivation:

In the native code EpollDatagramChannel / KQueueDatagramChannel creates a DatagramSocketAddress object for each received UDP datagram even when in connected mode as it uses the recvfrom(...) / recvmsg(...)  method. Creating these is quite heavy in terms of allocations as internally, char[], String, Inet4Address, InetAddressHolder, InetSocketAddressHolder, InetAddress[], byte[] objects are getting generated when constructing the object. When in connected mode we can just use regular read(...) calls which do not need to allocate all of these.

Modifications:

- When in connected mode use read(...) and NOT recvfrom(..) / readmsg(...) to reduce allocations when possible.
- Adjust tests to ensure read works as expected when in connected mode.

Result:

Less allocations and GC when using native datagram channels in connected mode. Fixes https://github.com/netty/netty/issues/8770.
2019-02-01 10:29:55 +01:00