Motivation:
When we detect a BUFFER_OVERFLOW we should just forward the already produced data and allocate a new buffer and NOT do any extra memory copies while trying to expand the buffer.
Modifications:
When a BUFFER_OVERFLOW is returned and some data was produced just fire this data through the pipeline and allocate a new buffer to read again.
Result:
Less memorycopies and so better performance.
Motivation:
A SSL_read is needed to ensure the bio buffer is flushed, for this we did a priming read. This can be removed in many cases. Also ensure we always fill as much as possible in the destination buffers.
Modifications:
- Only do priming read if capacity of all dsts buffers is zero
- Always produce as must data as possible in the dsts buffers.
Result:
Faster code.
Motivation:
Previous we called BIO_write until either everything was written into it or it returned an error, which meant that the buffer is full. This then needed a ERR_clear_error() call which is expensive.
Modifications:
Break out of writing loop once we detect that not everything was written and so the buffer is full.
Result:
Less overhead when writing more data then the internal buffer can take.
Motivation:
When BIO_write is called with an empty buffer it will return 0 for which we call ERR_clear_error(). This is not neccessary as we should just skip these buffers. This eliminates a lot of overhead.
Modifications:
Skip empty src buffers when call unwrap(...).
Result:
Less overhead for unwrap(...) when called with empty buffers.
Motivation:
If a user tries to access various informations on the OpenSslSession after the SSLEngine was closed it will not work if these were not accessed before as we lazy init most of them.
Modifications:
Directly populate the whole OpenSslSession once the handshake is complete and before the user is notified about it.
Result:
OpenSslSession informations are avaible until it is GC'ed.
Motivation:
We used ERR_get_error() to detect errors and missed to handle different errors. Also we missed to clear the error queue for a thread before invoke SSL operations,
this could lead to detecting errors on different OpenSslEngines then the one in which the error actual happened.
Modifications:
Explicit handle errors via SSL.get_error and clear the error code before SSL operations.
Result:
Correctly handle errors and no false-positives in different OpenSslEngines then the one which detected an error.
Motivation:
According to the javadocs of SSLSession.getPeerPrincipal should be returning the identity of the peer, while we return the identity of the issuer.
Modifications:
Return the correct indentity.
Result:
Behavior match the documentation.
Motivation:
Due a copy and paste error we incorrectly skipped the first cert in the keyCertChainFile when using OpenSslClientContext.
Modifications:
Correctly not skip the first cert.
Result:
The certificate chain is correctly setup when using OpenSslClientContext.
Motivation:
Dumping the content of a ByteBuf in a hex format is very useful.
Modifications:
Move code into ByteBufUtil so its easy to reuse.
Result:
Easy to reuse dumping code.
Motivation:
The current dumping code does not respect the readerIndex and so logs incorrect.
Modifications:
Respect readerIndex of ByteBuf
Result:
Correctly log content of buffer.
Motivation:
If the handlerAdded(...) callback was not called, the checkDeadLock() of the handshakeFuture will produce an IllegalStateException.
This was first reported at https://github.com/impossibl/pgjdbc-ng/issues/168 .
Modifications:
Pass deadlock check if ctx is null
Result:
No more race and so IllegalStateException.
Motivation:
For advanced use-cases it an be helpful to be able to directly access the SSL_CTX and SSL pointers of the underlying openssl objects. This for example allows to register custom C callbacks.
Modifications:
- Expose the SSL_CTX and SSL pointers
- Cleanup the shutdown code
Result:
It's now possible to obtain the c pointes and set native callbacks.
Motivation:
SpdyOrHttpChooser and Http2OrHttpChooser duplicate fair amount code with each other.
Modification:
- Replace SpdyOrHttpChooser and Http2OrHttpChooser with ApplicationProtocolNegotiationHandler
- Add ApplicationProtocolNames to define the known application-level protocol names
Result:
- Less code duplication
- A user can perform dynamic pipeline configuration that follows ALPN/NPN for any protocols.
Related: #3641 and #3813
Motivation:
When setting up an HTTP/1 or HTTP/2 (or SPDY) pipeline, a user usually
ends up with adding arbitrary set of handlers.
Http2OrHttpChooser and SpdyOrHttpChooser have two abstract methods
(create*Handler()) that expect a user to return a single handler, and
also have add*Handlers() methods that add the handler returned by
create*Handler() to the pipeline as well as the pre-defined set of
handlers.
The problem is, some users (read: I) don't need all of them or the
user wants to add more than one handler. For example, take a look at
io.netty.example.http2.tiles.Http2OrHttpHandler, which works around
this issue by overriding addHttp2Handlers() and making
createHttp2RequestHandler() a no-op.
Modifications:
- Replace add*Handlers() and create*Handler() with configure*()
- Rename getProtocol() to selectProtocol() to make what it does clear
- Provide the default implementation of selectProtocol()
- Remove SelectedProtocol.UNKNOWN and use null instead, because
'UNKNOWN' is not a protocol
- Proper exception handling in the *OrHttpChooser so that the
exception is logged and the connection is closed when failed to
select a protocol
- Make SpdyClient example always use SSL. It was always using SSL
anyway.
- Implement SslHandshakeCompletionEvent.toString() for debuggability
- Remove an orphaned class: JettyNpnSslSession
- Add SslHandler.applicationProtocol() to get the name of the
application protocol
- SSLSession.getProtocol() now returns transport-layer protocol name
only, so that it conforms to its contract.
Result:
- *OrHttpChooser have better API.
- *OrHttpChooser handle protocol selection failure properly.
- SSLSession.getProtocol() now conforms to its contract.
- SpdyClient example works with SpdyServer example out of the box
Motivation:
Calling System.nanoTime() for each channelRead(...) is very expensive. See [#3808] for more detailed description.
Also we always do extra work for each write and read even if read or write idle states should not be handled.
Modifications:
- Move System.nanoTime() call to channelReadComplete(...).
- Reuse ChannelFutureListener for writes
- Only add ChannelFutureListener to writes if write and all idle states should be handled.
- Only call System.nanoTime() for reads if idle state events for read and all states should be handled.
Result:
Less overhead when using the IdleStateHandler.
Motivation:
We called TrustManagerFactory.init(...) even when the trustCertChainFile is null. This could lead to exceptions during the handshake.
Modifications:
Correctly only call TurstManagerFactory.init() if trustCertcChainFail is not null.
Result:
Correct behavior.
Motiviation:
The OpenSSL engine uses SSLHandshakeException in the event of failures that occur during the handshake process. The alpn-boot project's getSSLException will also map the no_application_protocol to a SSLHandshakeException exception. We should be consistent and use SSLHandshakeException for handshake failure events.
Modifications:
-Update JdkAlpnSslEngine to propagate an SSLHandshakeException in the event of a failure.
Result:
Consistent usage of SSLHandshakeException during a handshake failure event.
Motivation:
Allow writing with void promise if IdleStateHandler is configured in the pipeline for read timeout events.
Modifications:
Better performance.
Result:
No more ChannelFutureListeners are created if IdleStateHandler is only configured for read timeouts allowing for writing to the channel with void promise.
Motivation:
[#3808] introduced some improvements to reduce the calls to System.nanoTime() but missed one possible optimization.
Modifications:
Only call System.nanoTime() if no reading patch is in process.
Result:
Less System.nanoTime() calls.
Motivation:
Discussion is in https://github.com/jetty-project/jetty-alpn/issues/8. The new API allows protocol negotiation to properly throw SSLHandshakeException.
Modifications:
Updated the parent pom.xml with the new version.
Result:
Upgraded alpn-api now allows throwing SSLHandshakeException.
Motivation:
We mitigate callouts to System.nanoTime() in SingleThreadEventExecutor
as it is 'relatively expensive'. On a modern system, tak translates to
about 20ns per call. With channelReadComplete() we can side-step this in
channelRead().
Modifications:
Introduce a boolean flag, which indicates that a read batch is currently
on-going, which acts as a flush guard for lastReadTime. Update
lastReadTime in channelReadComplete() just before setting the flag to
false. We set the flag to true in channelRead().
The periodic task examines the flag, and if it observes it to be true,
it will reschedule the task for the full duration. If it observes as
false, it will read lastReadTime and adjust the delay accordingly.
Result:
ReadTimeoutHandler calls System.nanoTime() only once per read batch.
Motivation:
At the moment hostname verification is not supported with OpenSSLEngine.
Modifications:
- Allow to create OpenSslEngine with peerHost and peerPort informations.
- Respect endPointIdentificationAlgorithm and algorithmConstraints when set and get SSLParamaters.
Result:
hostname verification is supported now.
Motivation:
keyManager() is required on server-side, and so there is a forServer()
method for each override of keyManager(). However, one of the
forServer() overrides was missing, which meant that if you wanted to use
a KeyManagerFactory you were forced to provide garbage configuration
just to get past null checks.
Modifications:
Add missing override.
Result:
No hacks to use SslContextBuilder on server-side with KeyManagerFactory.
Resolves#3775
Motivation:
To prevent from DOS attacks it can be useful to disable remote initiated renegotiation.
Modifications:
Add new flag to OpenSslContext that can be used to disable it
Adding a testcase
Result:
Remote initiated renegotion requests can be disabled now.
Motivation:
In the SslHandler we schedule a timeout at which we close the Channel if a timeout was detected during close_notify. Because this can race with notify the flushFuture we can see an IllegalStateException when the Channel is closed.
Modifications:
- Use a trySuccess() and tryFailure(...) to guard against race.
Result:
No more race.
Motivation:
Currently mutual auth is not supported when using OpenSslEngine.
Modification:
- Add support to OpenSslClientContext
- Correctly throw SSLHandshakeException when an error during handshake is detected
Result:
Mutual auth can be used with OpenSslEngine
Motivation:
Our automatically handling of non-auto-read failed because it not detected the need of calling read again by itself if nothing was decoded. Beside this handling of non-auto-read never worked for SslHandler as it always triggered a read even if it decoded a message and auto-read was false.
This fixes [#3529] and [#3587].
Modifications:
- Implement handling of calling read when nothing was decoded (with non-auto-read) to ByteToMessageDecoder again
- Correctly respect non-auto-read by SslHandler
Result:
No more stales and correctly respecting of non-auto-read by SslHandler.
Motivation:
Unnecessary object allocation is currently done during wrap/unwrap while a handshake is still in progress.
Modifications:
Use static instances when possible.
Result:
Less object creations.
Motivation:
Sometimes it's useful to get informations about the available OpenSSL library that is used for the OpenSslEngine.
Modifications:
Add two new methods which allows to get the available OpenSSL version as either
an int or an String.
Result:
Easy to access details about OpenSSL version.
Motivation:
Sometimes it's useful to use EC keys and not DSA or RSA. We should support it.
Modifications:
Support EC keys and share the code between JDK and Openssl impl.
Result:
It's possible to use EC keys now.
Motivation:
SslContext factory methods have gotten out of control; it's past time to
swap to a builder.
Modifications:
New Builder class. The existing factory methods must be left as-is for
backward compatibility.
Result:
Fixes#3531
Motivation:
To support HTTP2 we need APLN support. This was not provided before when using OpenSslEngine, so SSLEngine (JDK one) was the only bet.
Beside this CipherSuiteFilter was not supported
Modifications:
- Upgrade netty-tcnative and make use of new features to support ALPN and NPN in server and client mode.
- Guard against segfaults after the ssl pointer is freed
- support correctly different failure behaviours
- add support for CipherSuiteFilter
Result:
Be able to use OpenSslEngine for ALPN / NPN for server and client.
In TrafficCounter, a recent change makes the contract of the API (the
constructor) wrong and lead to issue with GlobalChannelTrafficCounter
where executor must be null.
Motivation:
TrafficCounter executor argument in constructor might be null, as
explained in the API, for some particular cases where no executor are
needed (relevant tasks being taken by the caller as in
GlobalChannelTrafficCounter).
A null pointer exception is raised while it should not since it is
legal.
Modifications:
Remove the 2 null checking for this particular attribute.
Note that when null, the attribute is not reached nor used (a null
checking condition later on is applied).
Result:
No more null exception raized while it should not.
This shall be made also to 4.0, 4.1 (present) and master. 3.10 is not
concerned.
Related: #3567
Motivation:
SslHandler.channelReadComplete() forgets to call
super.channelReadComplete(), which discards read bytes from the
cumulative buffer. As a result, the cumulative buffer can expand its
capacity unboundedly.
Modifications:
Call super.channelReadComplete() instead of calling
ctx.fireChannelReadComplete()
Result:
Fixes#3567
Motivation:
LoggingHandlerTest sometimes failure due to unexpected log messages
logged due to the automatic reclaimation of thread-local objects.
Expectation failure on verify:
Appender.doAppend([DEBUG] Freed 3 thread-local buffer(s) from thread: nioEventLoopGroup-23-0): expected: 1, actual: 0
Appender.doAppend([DEBUG] Freed 9 thread-local buffer(s) from thread: nioEventLoopGroup-23-1): expected: 1, actual: 0
Appender.doAppend([DEBUG] Freed 2 thread-local buffer(s) from thread: nioEventLoopGroup-23-2): expected: 1, actual: 0
Appender.doAppend([DEBUG] Freed 4 thread-local buffer(s) from thread: nioEventLoopGroup-26-0): expected: 1, actual: 0
Appender.doAppend(matchesLog(expected: ".+CLOSE$", got: "[id: 0xembedded, embedded => embedded] CLOSE")): expected: 1, actual: 0
Modifications:
Add the mock appender to the related logger only
Result:
No more intermittent test failures
Related: #3368
Motivation:
ChunkedWriteHandler checks if the return value of
ChunkedInput.isEndOfInput() after calling ChunkedInput.close().
This makes ChunkedStream.isEndOfInput() trigger an IOException, which is
originally triggered by PushBackInputStream.read().
By contract, ChunkedInput.isEndOfInput() should not raise an IOException
even when the underlying stream is closed.
Modifications:
Add a boolean flag that keeps track of whether the underlying stream has
been closed or not, so that ChunkedStream.isEndOfInput() does not
propagate the IOException from PushBackInputStream.
Result:
Fixes#3368
Motivation:
For some use cases X509ExtendedTrustManager is needed as it allows to also access the SslEngine during validation.
Modifications:
Add support for X509ExtendedTrustManager on java >= 7
Result:
It's now possible to use X509ExtendedTrustManager with OpenSslEngine
Motivation:
The Http2FrameLogger is currently using the internal logging classes. We should change this so that it's using the public classes and then converts internally.
Modifications:
Modified Http2FrameLogger and the examples to use the public LogLevel class.
Result:
Fixes#2512
Motivation:
With the current implementation the client protocol preference list
takes precedence over the one of the server, since the select method
will return the first item, in the client list, that matches any of the
protocols supported by the server. This violates the recommendation of
http://tools.ietf.org/html/rfc7301#section-3.2.
It will also fail with the current implementation of Chrome, which
sends back Extension application_layer_protocol_negotiation, protocols:
[http/1.1, spdy/3.1, h2-14]
Modifications:
Changed the protocol negotiator to prefer server’s list. Added a test
case that demonstrates the issue and that is fixed with the
modifications of this commit.
Result:
Server’s preference list is used.
Related: #3476
Motivation:
Some users use TrafficCounter for other uses than we originally
intended, such as implementing their own traffic shaper. In such a
case, a user does not want to specify an AbstractTrafficShapingHandler.
Modifications:
- Add a new constructor that does not require an
AbstractTrafficShapingHandler, so that a user can use it without it.
- Simplify TrafficMonitoringTask
- Javadoc cleanup
Result:
We open the possibility of using TrafficCounter for other purposes than
just using it with AbstractTrafficShapingHandler. Eventually, we could
generalize it a little bit more, so that we can potentially use it for
other uses.
Motivation:
There are various places in OpenSslEngine wher we can do performance optimizations.
Modifications:
- Reduce JNI calls when possible
- Detect finished handshake as soon as possible
- Eliminate double calculations
- wrap multiple ByteBuffer if possible in a loop
Result:
Better performance
Motivation:
At the moment we log priming read and handshake errors via info log level and still throw a SSLException that contains the error. We should only log with debug level to generate less noise.
Modifications:
Change logging to debug level.
Result:
Less noise .
Motivation:
SonarQube (clinker.netty.io/sonar) reported a few 'critical' issues related to the OpenSslEngine.
Modifications:
- Remove potential for dereference of null variable.
- Remove duplicate null check and TODO cleanup.
Results:
Less potential for null dereference, cleaner code, and 1 less TODO.
Motivation:
SslHandler adds a pending write with an empty buffer and a VoidChannelPromise when a user flush and not pending writes are currently stored. This may produce an IllegalStateException later if the user try to add a ChannelFutureListener to the promise in the next ChannelOutboundHandler.
Modifications:
Replace ctx.voidPromise() with ctx.newPromise()
Result:
No more IllegalStateException possible
Motivation:
SSLEngine specifies that IllegalArgumentException must be thrown if a null argument is given when using wrap(...) or unwrap(...).
Modifications:
Replace NullPointerException with IllegalArgumentException to match the javadocs.
Result:
Match the javadocs.
Motivation:
We failed to correctly calculate the endOffset when wrap multiple ByteBuffer and so not wrapped everything when an offset > 0 is used.
Modifications:
Correctly calculate endOffset.
Result:
All ByteBuffers are correctly wrapped when offset > 0.
Motivation:
When SslHandler.unwrap() copies SSL records into a heap buffer, it does
not update the start offset, causing IndexOutOfBoundsException.
Modifications:
- Copy to a heap buffer before calling unwrap() for simplicity
- Do not copy an empty buffer to a heap buffer.
- unwrap(... EMPTY_BUFFER ...) never involves copying now.
- Use better parameter names for unwrap()
- Clean-up log messages
Result:
- Bugs fixed
- Cleaner code
Motivation:
When using OpenSslEngine with the SslHandler it is possible to reduce memory copies by unwrap(...) multiple ByteBuffers at the same time. This way we can eliminate a memory copy that is needed otherwise to cumulate partial received data.
Modifications:
- Add OpenSslEngine.unwrap(ByteBuffer[],...) method that can be used to unwrap multiple src ByteBuffer a the same time
- Use a CompositeByteBuffer in SslHandler for inbound data so we not need to memory copy
- Add OpenSslEngine.unwrap(ByteBuffer[],...) in SslHandler if OpenSslEngine is used and the inbound ByteBuf is backed by more then one ByteBuffer
- Reduce object allocation
Result:
SslHandler is faster when using OpenSslEngine and produce less GC
Motivation:
Currently when there are bytes left in the cumulation buffer we do a byte copy to produce the input buffer for the decode method. This can put quite some overhead on the impl.
Modification:
- Use a CompositeByteBuf to eliminate the byte copy.
- Allow to specify if a CompositeBytebug should be used or not as some handlers can only act on one ByteBuffer in an efficient way (like SslHandler :( ).
Result:
Performance improvement as shown in the following benchmark.
Without this patch:
[xxx@xxx ~]$ ./wrk-benchmark
Running 5m test @ http://xxx:8080/plaintext
16 threads and 256 connections
Thread Stats Avg Stdev Max +/- Stdev
Latency 20.19ms 38.34ms 1.02s 98.70%
Req/Sec 241.10k 26.50k 303.45k 93.46%
1153994119 requests in 5.00m, 155.84GB read
Requests/sec: 3846702.44
Transfer/sec: 531.93MB
With the patch:
[xxx@xxx ~]$ ./wrk-benchmark
Running 5m test @ http://xxx:8080/plaintext
16 threads and 256 connections
Thread Stats Avg Stdev Max +/- Stdev
Latency 17.34ms 27.14ms 877.62ms 98.26%
Req/Sec 252.55k 23.77k 329.50k 87.71%
1209772221 requests in 5.00m, 163.37GB read
Requests/sec: 4032584.22
Transfer/sec: 557.64MB
Motivation:
When a user sees an error message, sometimes he or she does not know
what exactly he or she has to do to fix the problem.
Modifications:
Log the URL of the wiki pages that might help the user troubleshoot.
Result:
We are more friendly.
Motivation:
When a user deliberatively omitted netty-tcnative from classpath, he or
she will see an ugly stack trace of ClassNotFoundException.
Modifications:
Log more briefly when netty-tcnative is not in classpath.
Result:
Better-looking log at DEBUG level
Motivation:
- There's no point of pre-population.
- Waste of memory and time because they are going to be cached lazily
- Some pre-populated cipher suites are ancient and will be unused
Modification:
- Remove cache pre-population
Result:
Sanity restored
Motivation:
Calling JNI methods is pretty expensive, so we should only do if needed.
Modifications:
Lazy call methods if needed.
Result:
Better performance.
Motivation:
SSL_set_cipher_list() in OpenSSL does not fail as long as at least one
cipher suite is available. It is different from the semantics of
SSLEngine.setEnabledCipherSuites(), which raises an exception when the
list contains an unavailable cipher suite.
Modifications:
- Add OpenSsl.isCipherSuiteAvailable(String) which checks the
availability of a cipher suite
- Raise an IllegalArgumentException when the specified cipher suite is
not available
Result:
Fixed compatibility
Motivation:
To make OpenSslEngine a full drop-in replacement, we need to implement
getSupportedCipherSuites() and get/setEnabledCipherSuites().
Modifications:
- Retrieve the list of the available cipher suites when initializing
OpenSsl.
- Improve CipherSuiteConverter to understand SRP
- Add more test data to CipherSuiteConverterTest
- Add bulk-conversion method to CipherSuiteConverter
Result:
OpenSslEngine should now be a drop-in replacement for JDK SSLEngineImpl
for most cases.
Related: #3285
Motivation:
When a user attempts to switch from JdkSslContext to OpenSslContext, he
or she will see the initialization failure if he or she specified custom
cipher suites.
Modifications:
- Provide a utility class that converts between Java cipher suite string
and OpenSSL cipher suite string
- Attempt to convert the cipher suite so that a user can use the cipher
suite string format of Java regardless of the chosen SslContext impl
Result:
- It is possible to convert all known cipher suite strings.
- It is possible to switch from JdkSslContext and OpenSslContext and
vice versa without any configuration changes
Motivation:
Several issues were shown by various ticket (#2900#2956).
Also use the improvement on writability user management from #3036.
And finally add a mixte handler, both for Global and Channels, with
the advantages of being uniquely created and using less memory and
less shaping.
Issue #2900
When a huge amount of data are written, the current behavior of the
TrafficShaping handler is to limit the delay to 15s, whatever the delay
the previous write has. This is wrong, and when a huge amount of writes
are done in a short time, the traffic is not correctly shapened.
Moreover, there is a high risk of OOM if one is not using in his/her own
handler for instance ChannelFuture.addListener() to handle the write
bufferisation in the TrafficShapingHandler.
This fix use the "user-defined writability flags" from #3036 to
allow the TrafficShapingHandlers to "user-defined" managed writability
directly, as for reading, thus using the default isWritable() and
channelWritabilityChanged().
This allows for instance HttpChunkedInput to be fully compatible.
The "bandwidth" compute on write is only on "acquired" write orders, not
on "real" write orders, which is wrong from statistic point of view.
Issue #2956
When using GlobalTrafficShaping, every write (and read) are
synchronized, thus leading to a drop of performance.
ChannelTrafficShaping is not touched by this issue since synchronized is
then correct (handler is per channel, so the synchronized).
Modifications:
The current write delay computation takes into account the previous
write delay and time to check is the 15s delay (maxTime) is really
exceeded or not (using last scheduled write time). The algorithm is
simplified and in the same time more accurate.
This proposal uses the #3036 improvement on user-defined writability
flags.
When the real write occurs, the statistics are update accordingly on a
new attribute (getRealWriteThroughput()).
To limit the synchronisations, all synchronized on
GlobalTrafficShapingHandler on submitWrite were removed. They are
replaced with a lock per channel (since synchronization is still needed
to prevent unordered write per channel), as in the sendAllValid method
for the very same reason.
Also all synchronized on TrafficCounter on read/writeTimeToWait() are
removed as they are unnecessary since already locked before by the
caller.
Still the creation and remove operations on lock per channel (PerChannel
object) are synchronized to prevent concurrency issue on this critical
part, but then limited.
Additionnal changes:
1) Use System.nanoTime() instead of System.currentTimeMillis() and
minimize calls
2) Remove / 10 ° 10 since no more sleep usage
3) Use nanoTime instead of currentTime such that time spend is computed,
not real time clock. Therefore the "now" relative time (nanoTime based)
is passed on all sub methods.
4) Take care of removal of the handler to force write all pending writes
and release read too
8) Review Javadoc to explicit:
- recommandations to take into account isWritable
- recommandations to provide reasonable message size according to
traffic shaping limit
- explicit "best effort" traffic shaping behavior when changing
configuration dynamically
Add a MixteGlobalChannelTrafficShapingHandler which allows to use only one
handler for mixing Global and Channel TSH. I enables to save more memory and
tries to optimize the traffic among various channels.
Result:
The traffic shaping is more stable, even with a huge number of writes in
short time by taking into consideration last scheduled write time.
The current implementation of TrafficShapingHandler using user-defined
writability flags and default isWritable() and
fireChannelWritabilityChanged works as expected.
The statistics are more valuable (asked write vs real write).
The Global TrafficShapingHandler should now have less "global"
synchronization, hoping to the minimum, but still per Channel as needed.
The GlobalChannel TrafficShapingHandler allows to have only one handler for all channels while still offering per channel in addition to global traffic shaping.
And finally maintain backward compatibility.
Motivation:
Openssl supports the SSL_CTX_set_session_id_context function to limit for which context a session can be used. We should support this.
Modifications:
Add OpenSslServerSessionContext that exposes a setSessionIdContext(...) method now.
Result:
It's now possible to use SSL_CTX_set_session_id_context.
Motivation:
It is sometimes useful to enable / disable the session cache.
Modifications:
* Add OpenSslSessionContext.setSessionCacheEnabled(...) and isSessionCacheEnabled()
Result:
It is now possible to enable / disable cache on the fly
Motivation:
To be compatible with SSLEngine we need to support enable / disable procols on the OpenSslEngine
Modifications:
Implement OpenSslEngine.getSupportedProtocols() , getEnabledProtocols() and setEnabledProtocols(...)
Result:
Better compability with SSLEngine
Motivation:
The current implementation not returns the real session as byte[] representation.
Modifications:
Create a proper Openssl.SSLSession.get() implementation which returns the real session as byte[].
Result:
More correct implementation
Motivation:
At the moment it is not possible to make use of the session cache when OpenSsl is used. This should be possible when server mode is used.
Modifications:
- Add OpenSslSessionContext (implements SSLSessionContext) which exposes all the methods to modify the session cache.
- Add various extra methods to OpenSslSessionContext for extra functionality
- Return OpenSslSessionContext when OpenSslEngine.getSession().getContext() is called.
- Add sessionContext() to SslContext
- Move OpenSsl specific session operations to OpenSslSessionContext and mark the old methods @deprecated
Result:
It's now possible to use session cache with OpenSsl
Motivation:
ProxyHandlerTest fails with NoClassDefFoundError raised by
SslContext.newClientContext().
Modifications:
Fix a missing 'return' statement that makes the switch-case block fall
through unncecessarily
Result:
- ProxyHandlerTest does not fail anymore.
- SslContext.newClientContext() does not raise NoClassDefFoundError
anymore.
Motivation:
At the moment we use SSL.getLastError() in unwrap(...) to check for error. This is very inefficient as it creates a new String for each check and we also use a String.startsWith(...) to detect if there was an error we need to handle.
Modifications:
Use SSL.getLastErrorNumber() to detect if we need to handle an error, as this only returns a long and so no String creation happens. Also the detection is much cheaper as we can now only compare longs. Once an error is detected the lately SSL.getErrorString(long) is used to conver the error number to a String and include it in log and exception message.
Result:
Performance improvements in OpenSslEngine.unwrap(...) due less object allocation and also faster comparations.
Motivation:
As we now support OpenSslEngine for client side, we should use it when avaible.
Modifications:
Use SslProvider.OPENSSL when openssl can be found
Result:
OpenSslEngine is used whenever possible
Motivation:
When using client auth it is sometimes needed to use a custom TrustManagerFactory.
Modifications:
Allow to pass in TrustManagerFactory
Result:
It's now possible to use custom TrustManagerFactories for JdkSslServerContext and OpenSslServerContext
Motivation:
To make OpenSsl*Context a drop in replacement for JdkSsl*Context we need to use TrustManager.
Modifications:
Correctly hook in the TrustManager
Result:
Better compatibility
Motivation:
At the moment there is no way to enable client authentication when using OpenSslEngine. This limits the uses of OpenSslEngine.
Modifications:
Add support for different authentication modes.
Result:
OpenSslEngine can now also be used when client authenticiation is needed.
Motivation:
The current SSLSession implementation used by OpenSslEngine does not support various operations and so may not be a good replacement by the SSLEngine provided by the JDK implementation.
Modifications:
- Add SSLSession.getCreationTime()
- Add SSLSession.getLastAccessedTime()
- Add SSLSession.putValue(...), getValue(...), removeValue(...), getValueNames()
- Add correct SSLSession.getProtocol()
- Ensure OpenSSLEngine.getSession() is thread-safe
- Use optimized AtomicIntegerFieldUpdater when possible
Result:
More complete OpenSslEngine SSLSession implementation
Motivation:
We only support openssl for server side at the moment but it would be also useful for client side.
Modification:
* Upgrade to new netty-tcnative snapshot to support client side openssl support
* Add OpenSslClientContext which can be used to create SslEngine for client side usage
* Factor out common logic between OpenSslClientContext and OpenSslServerContent into new abstract base class called OpenSslContext
* Correctly detect handshake failures as soon as possible
* Guard against segfault caused by multiple calls to destroyPools(). This can happen if OpenSslContext throws an exception in the constructor and the finalize() method is called later during GC
Result:
openssl can be used for client and servers now.
Motivation:
SslHandler.wrap(...) does a poor job when handling CompositeByteBuf as it always call ByteBuf.nioBuffer() which will do a memory copy when a CompositeByteBuf is used that is backed by multiple ByteBuf.
Modifications:
- Use SslEngine.wrap(ByteBuffer[]...) to allow wrap CompositeByteBuf in an efficient manner
- Reduce object allocation in unwrapNonAppData(...)
Result:
Performance improvement when a CompositeByteBuf is written and the SslHandler is in the ChannelPipeline.
Motivation:
When a remote peer did open a connection and only do the handshake without sending any data and then directly close the connection we did not call shutdown() in the OpenSslEngine. This leads to a native memory leak. Beside this it also was not fireed when a OpenSslEngine was created but never used.
Modifications:
- Make sure shutdown() is called in all cases when closeInbound() is called
- Call shutdown() also in the finalize() method to ensure we release native memory when the OpenSslEngine is GC'ed
Result:
No more memory leak when using OpenSslEngine
Related:
e9685ea45a
Motivation:
SslHandler.unwrap() does not evaluate the handshake status of
SSLEngine.unwrap() when the status of SSLEngine.unwrap() is CLOSED.
It is not correct because the status does not reflect the state of the
handshake currently in progress, accoding to the API documentation of
SSLEngineResult.Status.
Also, sslCloseFuture can be notified earlier than handshake notification
because we call sslCloseFuture.trySuccess() before evaluating handshake
status.
Modifications:
- Notify sslCloseFuture after the unwrap loop is finished
- Add more assertions to SocketSslEchoTest
Result:
Potentially fix the regression caused by:
- e9685ea45a
Related: #2958
Motivation:
SslHandler currently does not issue a read() request when it is
handshaking. It makes a connection with autoRead off stall, because a
user's read() request can be used to read the handshake response which
is invisible to the user.
Modifications:
- SslHandler now issues a read() request when:
- the current handshake is in progress and channelReadComplete() is
invoked
- the current handshake is complete and a user issued a read() request
during handshake
- Rename flushedBeforeHandshakeDone to flushedBeforeHandshake for
consistency with the new variable 'readDuringHandshake'
Result:
SslHandler should work regardless whether autoRead is on or off.
Related: #3125
Motivation:
We did not expose a way to initiate TLS renegotiation and to get
notified when the renegotiation is done.
Modifications:
- Add SslHandler.renegotiate() so that a user can initiate TLS
renegotiation and get the future that's notified on completion
- Make SslHandler.handshakeFuture() return the future for the most
recent handshake so that a user can get the future of the last
renegotiation
- Add the test for renegotiation to SocketSslEchoTest
Result:
Both client-initiated and server-initiated renegotiations are now
supported properly.
Related: #3219
Motivation:
ChunkedWriteHandler.flush() does not call ctx.flush() when channel is
not writable. This can be a problem when other handler / non-Netty
thread writes messages simultaneously, because
ChunkedWriteHandler.flush() might have no chance to observe
channel.isWritable() returns true and thus the channel is never flushed.
Modifications:
- Ensure that ChunkedWriteHandler.flush() calls ctx.flush() at least
once.
Result:
A stall connection issue, that occurs when certain combination of
handlers exist in a pipeline, has been fixed. (e.g. SslHandler and
ChunkedWriteHandler)
- Parameterize DomainNameMapping to make it useful for other use cases
than just mapping to SslContext
- Move DomainNameMapping to io.netty.util
- Clean-up the API documentation
- Make SniHandler.hostname and sslContext volatile because they can be
accessed by non-I/O threads
Motivation:
We use 3 (!) libraries to build mock objects - easymock, mockito, jmock.
Mockito and jMock pulls in the different versions of Hamcrest, and it
conflicts with the version pulled by jUnit.
Modifications:
- Replace mockito-all with mockito-core to avoid pulling in outdated
jUnit and Hamcrest
- Exclude junit-dep when pulling in jmock-junit4, because it pulls an
outdated Hamcrest version
- Pull in the hamcrest-library version used by jUnit explicitly
Result:
No more dependency hell that results in NoSuchMethodError during the
tests
Motivation:
When we need to host multiple server name with a single IP, it requires
the server to support Server Name Indication extension to serve clients
with proper certificate. So the SniHandler will host multiple
SslContext(s) and append SslHandler for requested hostname.
Modification:
* Added SniHandler to host multiple certifications in a single server
* Test case
Result:
User could use SniHandler to host multiple certifcates at a time.
It's server-side only.
Motivation:
JdkSslContext used SSL_RSA_WITH_DES_CBC_SHA in its cipher suite list.
OpenSslServerContext used DES-CBC3-SHA in the same place in its cipher suite
list, which is equivalent to SSL_RSA_WITH_3DES_EDE_CBC_SHA.
This means the lists were out of sync. Furthermore, using
SSL_RSA_WITH_DES_CBC_SHA is not desirable as it uses DES, a weak cipher. Triple
DES should be used instead.
Modifications:
Replace SSL_RSA_WITH_DES_CBC_SHA with SSL_RSA_WITH_3DES_EDE_CBC_SHA in
JdkSslContext.
Result:
The JdkSslContext and OpenSslServerContext cipher suite lists are now in sync.
Triple DES is used instead of DES, which is stronger.
Motivation:
RC4 is not a recommended cipher suite anymore, as the recent research
reveals, such as:
- http://www.isg.rhul.ac.uk/tls/
Modifications:
- Remove most RC4 cipher suites from the default cipher suites
- For backward compatibility, leave RC4-SHA, while de-prioritizing it
Result:
Potentially safer default
Motivation:
Found performance issues via FindBugs and PMD.
Modifications:
- Removed unnecessary boxing/unboxing operations in DefaultTextHeaders.convertToInt(CharSequence) and DefaultTextHeaders.convertToLong(CharSequence). A boxed primitive is created from a string, just to extract the unboxed primitive value.
- Added a static modifier for DefaultHttp2Connection.ParentChangedEvent class. This class is an inner class, but does not use its embedded reference to the object which created it. This reference makes the instances of the class larger, and may keep the reference to the creator object alive longer than necessary.
- Added a static compiled Pattern to avoid compile it each time it is used when we need to replace some part of authority.
- Improved using of StringBuilders.
Result:
Performance improvements.
Motivation:
When ALPN/NPN is disabled, a user has to instantiate a new
ApplicationProtocolConfig with meaningless parameters.
Modifications:
- Add ApplicationProtocolConfig.DISABLED, the singleton instance
- Reject the constructor calls with Protocol.NONE, which doesn't make
much sense because a user should use DISABLED instead.
Result:
More user-friendly API when ALPN/NPN is not needed by a user.
Motivation:
Previous backport removed the old methods and constructors. They should
not be removed in 4.x but just deprecated in favor of the new methods
and constructors.
Modifications:
Add back the removed methods and constructors in SslContext and its
subtypes for backward compatibility.
Result:
Backward compatibility issues fixed.
Motivation:
Improvements were made on the main line to support ALPN and mutual
authentication for TLS. These should be backported.
Modifications:
- Backport commits from the master branch
- f8af84d599
- e74c8edba3
Result:
Support for ALPN and mutual authentication.
Motivation:
The SslHandler currently forces the use of a direct buffer for the input to the SSLEngine.wrap(..) operation. This allocation may not always be desired and should be conditionally done.
Modifications:
- Use the pre-existing wantsDirectBuffer variable as the condition to do the conversion.
Result:
- An allocation of a direct byte buffer and a copy of data is now not required for every SslHandler wrap operation.
Motivation:
The SslHandler wrap method requires that a direct buffer be passed to the SSLEngine.wrap() call. If the ByteBuf parameter does not have an underlying direct buffer then one is allocated in this method, but it is not released.
Modifications:
- Release the direct ByteBuffer only accessible in the scope of SslHandler.wrap
Result:
Memory leak in SslHandler.wrap is fixed.
