Motiviation:
The current read loops don't fascilitate reading a maximum amount of bytes. This capability is useful to have more fine grain control over how much data is injested.
Modifications:
- Add a setMaxBytesPerRead(int) and getMaxBytesPerRead() to ChannelConfig
- Add a setMaxBytesPerIndividualRead(int) and getMaxBytesPerIndividualRead to ChannelConfig
- Add methods to RecvByteBufAllocator so that a pluggable scheme can be used to control the behavior of the read loop.
- Modify read loop for all transport types to respect the new RecvByteBufAllocator API
Result:
The ability to control how many bytes are read for each read operation/loop, and a more extensible read loop.
Motivation:
IP_FREEBIND allows to bind to addresses without the address up yet or even the interface configured yet.
Modifications:
Add support for IP_FREEBIND.
Result:
It's now possible to use IP_FREEBIND when using the native epoll transport.
Motivation:
It would be useful to support the Java `Map` interface in our primitive maps.
Modifications:
Renamed current methods to "pXXX", where p is short for "primitive". Made the template for all primitive maps extend the appropriate Map interface.
Result:
Fixes#3970
Motivation:
We missed to register for EPOLLRDHUP events when construct the EpollSocketChannel from an existing FileDescriptor. This could cause to miss connection-resets.
Modifications:
Add Native.EPOLLRDHUP to the events we are interested in.
Result:
Connection-resets are detected correctly.
Motivation:
Some glibc/kernel versions will trigger an EPOLLERR event to notify
about failed connect and not an EPOLLOUT. Also EPOLLERR may be triggered
when a connection is broke.
Modification:
React on EPOLLERR like if an EPOLLOUT / EPOLLIN was received, this will work in
all cases as we handle errors in EPOLLOUT / EPOLLIN anyway.
Result:
Correctly detect errors.
Motivation:
The unit tests should not fail due to using a channel option which is not supported by the underlying kernel.
Modifications:
- Ignore RuntimeExceptions which are thrown by JNI code when setsockopt or getsockopt fails.
Result:
Unit tests pass if socket option is not supported by kernel.
Motiviation:
TCP_NOTSENT_LOWAT is only supported in linux kernel 3.12 or newer. The addition of this socket option prevents older kernels from building.
Modifications:
- Conditionally define TCP_NOTSENT_LOWAT if it is not defined
Result:
Kernels older than 3.12 can still compile the EPOLL module.
Motiviation:
Linux provides the TCP_NOTSENT_LOWAT socket option. This can be used to control how much unsent data is queued in the tcp kernel buffers. This can be important when application level protocols (SPDY, HTTP/2) have their own priority mechanism and don't want data queued in the kernel.
Modifications:
- The epoll module will have an additional socket option TCP_NOTSENT_LOWAT
- There will be JNI methods to control the underlying linux socket option mechanism
Result:
Linux EPOLL module exposes the TCP_NOTSENT_LOWAT socket option.
Motivation:
the JNI function ThrowNew won't release any allocated memory.
The method exceptionMessage is allocating a new string concatenating 2 constant strings
What is creating a small leak in case of these exceptions are happening.
Modifications:
Added new methods that will use exceptionMessage and free resources accordingly.
I am also removing the inline definition on these methods as they could be reused by
other added modules (e.g. libaio which should be coming soon)
Result:
No more leaks in case of failures.
Motivation:
Due a bug we not correctly handled connection refused errors and so failed the connect promise with the wrong exception.
Beside this we some times even triggered fireChannelActive() which is not correct.
Modifications:
- Add testcase
- correctly detect connect errors
Result:
Correct and consistent handling.
Motivation:
When trying to write more then Integer.MAX_VALUE / SSIZE_MAX via writev(...) the OS may return EINVAL depending on the kernel or the actual OS (bsd / osx always return EINVAL). This will trigger an IOException.
Modifications:
Never try to write more then Integer.MAX_VALUE / SSIZE_MAX when using writev.
Result:
No more IOException when write more data then Integer.MAX_VALUE / SSIZE_MAX via writev.
Motivation:
When EPOLLRDHUP is received we need to try to read at least one time to ensure
that we read all pending data from the socket. Otherwise we may loose data.
Modifications:
- Ensure we read all data from socket
- Ensure file descriptor is closed on doClose() even if doDeregister() throws an Exception.
- Only handle either EPOLLRDHUP or EPOLLIN as only one is needed to detect connection reset.
Result:
No more data loss on connection reset.
Motivation:
When using epoll_ctl we should respect the return value and do the right thing depending on it.
Modifications:
Adjust java and native code to respect epoll_ctl return values.
Result:
Correct and cleaner code.
Motivation:
Linux supports splice(...) to transfer data from one filedescriptor to another without
pass data through the user-space. This allows to write high-performant proxy code or to stream
stuff from the socket directly the the filesystem.
Modification:
Add AbstractEpollStreamChannel.spliceTo(...) method to support splice(...) system call
Result:
Splice is now supported when using the native linux transport.
Conflicts:
transport-native-epoll/src/main/java/io/netty/channel/epoll/AbstractEpollStreamChannel.java
Motivation:
Because of a bug we missed to fail the connect future when doClose() is called. This can lead to a future which is never notified and so may lead to deadlocks in user-programs.
Modifications:
Correctly fail the connect future when doClose() is called and the connection was not established yet.
Result:
Connect future is always notified.
Motivation:
As we missed to correctly handle EPOLLRDHUP we produce an IOException which is unnessary. This leads
to have exceptionCaught(...) methods called.
Modifications:
When EPOLLRDHUP was received just close the socket and fail all pending writes.
Result:
Correctly handle of EPOLLRDHUP and so not miss-leading exceptions.
Motivation:
When an error happens during loading the native library it may try to generate a new RuntimeException before the RuntimeException is loaded.
Modifications:
- Load RuntimeException as first
Result:
No more segfaults possible
Motivation:
When setting nEventLoops to zero in the MultithreadedEventLoopGroup constructor
the EventLoopGroup chooses the number of EventLoops and Threads to use for you.
We want to make use of this behaviour internally and thus we would like to document
it as a part of the official API, so that we can rely on it.
Modifications:
Document the behaviour when setting nEventLoops to zero.
Fix several spelling / sloppiness mistakes in the documentation.
Result:
nEventLoops=0 is now documented as a part of the official API.
The quality of the documentation is improved.
Motivation:
On a system where ipv4 and ipv6 are supported a user may want to use -Djava.net.preferIPv4Stack=true to restrict it to use ipv4 only.
This is currently ignored with the epoll transport.
Modifications:
Respect java.net.preferIPv4Stack system property.
Result:
-Djava.net.preferIPv4Stack=true will have the effect the user is looking for.
Motivation:
Due a a regression that was introduced by b898bdd we failed to set the localAddress if the connect did not success directly.
Modifications:
Correct set localAddress in doConnect(...)
Result:
Be able to get the localAddress in all cases.
Motivation:
During 6b941e9bdb I introduced a regression that could cause an IllegalStateException.
A non-proper fix was commited as part of #3443. This commit add a proper fix.
Modifications:
Remove FileDescriptor.INVALID and add FileDescriptor.isOpen() as replacement. Once FileDescriptor.close() is called isOpen() will return false.
Result:
No more IllegalStateException caused by a close channel.
Motivation:
EpollDragramChannel never calls fireChannelActive after connect() which is a bug.
Modifications:
Correctly call fireChannelActive if needed
Result:
Correct behaviour
Motivation:
Before struct's were passed per value and not pointer. This did enforce a memory copy which is not needed.
Modifications:
- Use "const struct....*" as replacement
Result:
No more unnecessary memory copies
Motivation:
When create address from filedescriptor we may use incorrect byte order and so end up with an incorrect InetAddress.
Modification:
Not manually shift bytes
Result:
Correct address in all cases.
Motivation:
Because of a regression sometimes accept could produce an IllegalArgumentException
Modifications:
Correctly respect offset when decode port and scope id.
Result:
No more IllegalArgumentException
Motivation:
This is a regression that was introduced as part of 6b941e9bdb. The regression could produce an "infinity" triggering of IllegalStateException if a channel goes inactive while process the events for it.
Modifications:
Correctly check if the channel is still active before trigger the callbacks.
Result:
No more IllegalStateException
Motivation:
There is a small race in the native transport where an accept(...) may success but a later try to obtain the remote address from the fd may fail is the fd is already closed.
Modifications:
Let accept(...) directly set the remote address.
Result:
No more race possible.
Motivation:
When epoll LT is used and autoRead == false when entering epollIn() we need to return without reading any data.
Modifications:
Correctly respect autoRead == false if using epoll LT.
Result:
Consistent and correct behaviour.
Motivation:
In the native transport we should throw a pre-instanced IOException on connection reset while reading.
Modifications:
Correctly throw pre-instanced IOException when ECONNRESET is received
Result:
Less overhead on connection reset
Motivation:
As we plan to have other native transports soon (like a kqueue transport) we should move unix classes/interfaces out of the epoll package so we
introduce other implementations without breaking stuff before the next stable release.
Modifications:
Create a new io.netty.channel.unix package and move stuff over there.
Result:
Possible to introduce other native impls beside epoll.
Motivation:
Sometimes it's useful to be able to create a Epoll*Channel from an existing file descriptor. This is especially helpful if you integrade some c/jni code.
Modifications:
- Add extra constructor to Epoll*Channel implementations that take a FileDescriptor as an argument
- Make Rename EpollFileDescriptor to NativeFileDescriptor and make it public
- Also ensure we obtain the correct remote/local address when create a Channel from a FileDescriptor
Result:
It's now possible to create a FileDescriptor and instance a Epoll*Channel via it.
Motivation:
If SO_LINGER is used shutdownOutput() and close() syscalls will block until either all data was send or until the timeout exceed. This is a problem when we try to execute them on the EventLoop as this means the EventLoop may be blocked and so can not process any other I/O.
Modifications:
- Add AbstractUnsafe.closeExecutor() which returns null by default and use this Executor for close if not null.
- Override the closeExecutor() in NioSocketChannel and EpollSocketChannel and return GlobalEventExecutor.INSTANCE if getSoLinger() > 0
- use closeExecutor() in shutdownInput(...) in NioSocketChannel and EpollSocketChannel
Result:
No more blocking of the EventLoop if SO_LINGER is used and shutdownOutput() or close() is called.
Motivation:
Some of the methods are frequently called and so should be inlined if possible.
Modifications:
Give the compiler a hint that we want to inline these methods.
Result:
Better performance if inlined.
Motivation:
Older linux kernels have problems handling a large value for epoll_wait(...) and so wait for ever.
Modifications:
Adjust timeout on the fly if a too big value is passed in.
Result:
Correctly works also on older kernels.
Motivation:
The writeSpinCount was ignored in the epoll transport and it just kept on trying writing. This could cause unnessary cpu spinning if a slow remote peer was reading the data very very slow.
Modification:
- Correctly take writeSpinCount into account when writing.
Result:
Less cpu spinning when writing to a slow remote peer.
Motivation:
Fix regression introduced by 585ce1593f, which missed to set EPOLLRDHUP for all stream channels.
Modifications:
Correctly set EPOLLRDHUP for all stream channels in the AbstractEpollStreamChannel constructor.
Result:
No more test failures in EpollDomain*Channel tests.
Motivation:
Before we used a long[] to store the ready events, this had a few problems and limitations:
- An extra loop was needed to translate between epoll_event and our long
- JNI may need to do extra memory copy if the JVM not supports pinning
- More branches
Modifications:
- Introduce a EpollEventArray which allows to directly write in a struct epoll_event* and pass it to epoll_wait.
Result:
Better speed when using native transport, as shown in the benchmark.
Before:
[xxx@xxx wrk]$ ./wrk -H 'Connection: keep-alive' -d 120 -c 256 -t 16 -s scripts/pipeline-many.lua http://xxx:8080/plaintext
Running 2m test @ http://xxx:8080/plaintext
16 threads and 256 connections
Thread Stats Avg Stdev Max +/- Stdev
Latency 14.56ms 8.64ms 117.15ms 80.58%
Req/Sec 286.17k 38.71k 421.48k 68.17%
546324329 requests in 2.00m, 73.78GB read
Requests/sec: 4553438.39
Transfer/sec: 629.66MB
After:
[xxx@xxx wrk]$ ./wrk -H 'Connection: keep-alive' -d 120 -c 256 -t 16 -s scripts/pipeline-many.lua http://xxx:8080/plaintext
Running 2m test @ http://xxx:8080/plaintext
16 threads and 256 connections
Thread Stats Avg Stdev Max +/- Stdev
Latency 14.12ms 8.69ms 100.40ms 83.08%
Req/Sec 294.79k 40.23k 472.70k 66.75%
555997226 requests in 2.00m, 75.08GB read
Requests/sec: 4634343.40
Transfer/sec: 640.85MB
Motivation:
Netty uses edge-triggered epoll by default for performance reasons. The downside here is that a messagesPerRead limit can not be enforced correctly, as we need to consume everything from the channel when notified.
Modification:
- Allow to switch epoll modes before channel is registered
- Some refactoring to share more code
Result:
It's now possible to switch epoll mode.
Motiviation:
When using domain sockets on linux it is supported to recv and send file descriptors. This can be used to pass around for example sockets.
Modifications:
- Add support for recv and send file descriptors when using EpollDomainSocketChannel.
- Allow to obtain the file descriptor for an Epoll*Channel so it can be send via domain sockets.
Result:
recv and send of file descriptors is supported now.
Motivation:
Using Unix Domain Sockets can be very useful when communication should take place on the same host and has less overhead then using loopback. We should support this with the native epoll transport.
Modifications:
- Add support for Unix Domain Sockets.
- Adjust testsuite to be able to reuse tests.
Result:
Unix Domain Sockets are now support when using native epoll transport.
Motivation:
At the moment the max number of events that can be handled per epoll wakup was set during construction.
Modifications:
- Automatically increase the max number of events to handle
Result:
Better performance when a lot of events need to be handled without adjusting the code.
Motivation:
The current way how the guard against overflow when generating the nextId() is pretty slow once an overflow happened.
Modifications:
Once a possible overflow is detected all ids used by the EpollEventLoop are scrubed and re-assigned to the registered Channels. This way we only need to do extra work each time an overflow is detected.
Result:
More consistent performance even after the first overflow was detected.
Motivation:
On Linux, you can gather various metrics using getsockopt(..., TCP_INFO,
...).
Modifications:
Add EpollSocketChannel.tcpInfo() which returns EpollTcpInfo that exposes
all metrics exposed via getsockopt(..., TCP_INFO, ...)
Result:
TCP_INFO support implemented
Motivation:
In the native transport we use getpeername to obtain the remote address from the file descriptor. This may fail for various reasons in which case NULL is returned.
Modifications:
- Check for null when try to obtain remote / local address
Result:
No more NPE
