Motivation:
There are use cases when Unix domain datagram sockets are needed for communication. This PR adds such support for Epoll/KQueue.
Modification:
- Expose Channel, Config and Packet interfaces/classes for Unix domain datagram sockets. All interfaces/classes are in `transport-native-unix-common` module in order to be available for KQueue and Epoll implementations
- Add JNI code for Unix domain datagram sockets
- Refactor `DatagramUnicastTest` so that it can be used for testing also Unix domain datagram sockets
- Add Unix domain datagram sockets implementation for KQueue transport
- Add Unix domain datagram sockets implementation for Epoll transport
Result:
Fixes#6737
Motivation:
Currently the PR verification takes a lot of time. We should try to only run builds for the affected modules in most cases to speed up the build.
Modifications:
Adjust docker files and workflow to only run build for affected modules for a lot of jobs while still run full builds for windows + java11 with BoringSSL
Result:
Hopefully quicker feedback loop when verify PRs
Motivation:
At the moment we only support signing / decrypting the private key in a synchronous fashion. This is quite limited as we may want to do a network call to do so on a remote system for example.
Modifications:
- Update to latest netty-tcnative which supports running tasks in an asynchronous fashion.
- Add OpenSslAsyncPrivateKeyMethod interface
- Adjust SslHandler to be able to handle asynchronous task execution
- Adjust unit tests to test that asynchronous task execution works in all cases
Result:
Be able to asynchronous do key signing operations
Motivation:
Currently, Netty only has BrotliDecoder which can decode Brotli encoded data. However, BrotliEncoder is missing which will encode normal data to Brotli encoded data.
Modification:
Added BrotliEncoder and CompressionOption
Result:
Fixes#6899.
Co-authored-by: Norman Maurer <norman_maurer@apple.com>
Motivation:
ZSTD has a wide range of uses on the Internet, so should consider adding `application/zstd` HTTP media-type and `zstd` content-encoding, see https://tools.ietf.org/html/rfc8478
Modification:
Add `application/zstd` HTTP media-type and `zstd` content-encoding
Result:
netty provides `application/zstd` HTTP media-type and `zstd content-encoding` as http headers
Signed-off-by: xingrufei <xingrufei@sogou-inc.com>
Co-authored-by: xingrufei <xingrufei@sogou-inc.com>
Motivation:
At the moment we always build all modules. This script can be used to only build affected modules for a given change
Modifications:
Add script that will only build modules that are affected by a change
Result:
More targeted build
Motivation:
We should only run one SSL task per delegation to allow more SSLEngines to make progress in a timely manner
Modifications:
- Only run one task per delegation to the executor
- Only create new SSL task if really needed
- Only schedule if not on the EventExecutor thread
Result:
More fair usage of resources and less allocations
Motivation:
Protocols and Cipher suites constants to prevent typos in protocol and cipher suites names and ease of use.
Modification:
Added Protocols and Cipher suites as constants in their respective classes.
Result:
Fixes#11393
Motivation:
7c57c4be17 did add a way to async sign keys but did not guard against the handler been removed before try to wrap in cause of an error which could lead to a harmless NPE.
Modifications:
Add check
Result:
No more harmless NPE
__Motivation__
`ApplicationProtocolNegotiationHandler` buffers messages which are read before SSL handshake complete event is received and drains them when the handler is removed. However, the channel may be closed (or input shutdown) before SSL handshake event is received in which case we may fire channel read after channel closure (from `handlerRemoved()`).
__Modification__
Intercept `channelInactive()` and input closed event and drain the buffer.
__Result__
If channel is closed before SSL handshake complete event is received, we still maintain the order of message read and channel closure.
Co-authored-by: Norman Maurer <norman_maurer@apple.com>
Motivation:
At the moment we only support signing / decrypting the private key in a synchronous fashion. This is quite limited as we may want to do a network call to do so on a remote system for example.
Modifications:
- Update to latest netty-tcnative which supports running tasks in an asynchronous fashion.
- Add OpenSslAsyncPrivateKeyMethod interface
- Adjust SslHandler to be able to handle asynchronous task execution
- Adjust unit tests to test that asynchronous task execution works in all cases
Result:
Be able to asynchronous do key signing operations
Motivation:
The `PerMessageDeflateClientExtensionHandler` has the following strange behaviors currently:
* The `requestedServerNoContext` parameter doesn't actually add the `server_no_context_takeover` parameter to the client offer; instead it depends on the requested server window size.
* The handshake will fail if the server responds with a `server_no_context_takeover` parameter and `requestedServerNoContext` is false. According to RFC 7692 (7.1.1.1) the server may do this, and this means that to cover both cases one needs to use two handshakers in the channel pipeline: one with `requestedServerNoContext = true` and one with `requestedServerNoContext = false`.
* The value of the `server_max_window_bits` parameter in the server response is never checked (should be between 8 and 15). And the value of `client_max_window_bits` is checked only in the branch handling the server window parameter.
Modification:
* Add the `server_no_context_takeover` parameter if `requestedServerNoContext` is true.
* Accept a server handshake response which includes the server no context takeover parameter even if we did not request it.
* Check the values of the client and server window size in their respective branches and fail the handshake if they are out of bounds.
Result:
There will be no need to use two handshakers in the pipeline to be lenient in what handshakes are accepted.
Motivation:
We should update to use junit5 in all modules.
Modifications:
Adjust missing epoll tests to use junit5
Result:
Part of https://github.com/netty/netty/issues/10757
Motivation:
We should update to use junit5 in all modules.
Modifications:
Adjust transport-udt tests to use junit5
Result:
Part of https://github.com/netty/netty/issues/10757
Motivation:
Including codec-http in the project and building a native-image out of it using a GraalVM 21.2 nightly can result in a failure.
Modification:
By delaying the initialization of `io.netty.handler.codec.compression.BrotliDecoder` to runtime, native-image will not try to eagerly initialize the class during the image build, avoiding the build failure described in the issue.
Result:
Fixes#11427
Motivation:
Currently, Netty cannot handle HTTP/2 Preface messages if the client used the Prior knowledge technique. In Prior knowledge, the client sends an HTTP/2 preface message immediately after finishing TLS Handshake. But in Netty, when TLS Handshake is finished, ALPNHandler is triggered to configure the pipeline. And between these 2 operations, if an HTTP/2 preface message arrives, it gets dropped.
Modification:
Buffer messages until we are done with the ALPN handling.
Result:
Fixes#11403.
Co-authored-by: Norman Maurer <norman_maurer@apple.com>
Motivation:
This caused test failures due to the deprecation warning and produced a
dumpstream.
Modification:
Replace deprecated flag with recommended one.
Result:
Fix deprecation and cause of test failure in codec project.
Motivation:
IO transports (primarily epoll, but also applies to kqueue, nio) cant be configured with separate tail tasks queue factory -
instead single queue factory is used for both normal tasks and tail tasks.
Modifications:
Add constructor accepting tail EventLoopTaskQueueFactory to aforementioned transports
Result:
IO transports can be configured with separate tail tasks
Motivation:
The native module is not yet available on aarch64 Mac / Windows thus causing tests in codec/ to fail (specifically all the Brotli ones, since the module could not be loaded).
Modification:
Disable Brotli tests when platform is not supported
Result:
Tests under codec/ now pass under Mac/aarch64 and Windows/aarch64
__Motivation__
Add support for GMSSL protocol to SslUtils.
__Modification__
Modify `SslUtils.getEncryptedPacketLength(ByteBuf buffer, int offset)` to get packet length when protocol is GMSSL.
Modify `SslUtils.getEncryptedPacketLength(ByteBuffer buffer)` to get packet length when protocol is GMSSL.
__Result__
`SslUtils.getEncryptedPacketLength` now supports GMSSL protocol. Fixes https://github.com/netty/netty/issues/11406
Motivation:
HTTP header values are case sensitive. The expected value for `x-request-with` header is `XMLHttpRequest`, not `XmlHttpRequest`.
Modification:
Fix constant's case.
Result:
Correct `XMLHttpRequest` HTTP header value.
Motivation:
We failed to account for the last header when estimating the buffer
size. If the data does not compress enough to make space for the
last header we would exceed the ByteBuf's capacity.
Modifications:
Call #ensureWritable with appropriate capacity for footer ByteBuf
befor writing footer.
Result:
If there is not enough space left in the buffer, the buffer will be
expanded.
Motivation:
We should update to use junit5 in all modules.
Modifications:
Adjust codec-redis tests to use junit5
Result:
Part of https://github.com/netty/netty/issues/10757
Motivation:
8c73dbe9bd did migrate the codec-http2 code to use junit5 but missed two classes.
Modifications:
Adjust the rest of codec-http2 tests to use junit5
Result:
Part of https://github.com/netty/netty/issues/10757
Motivation:
We should update to use junit5 in all modules.
Modifications:
Adjust codec-http2 tests to use junit5
Result:
Part of https://github.com/netty/netty/issues/10757
__Motivation__
`LoggingHandler` misses a constructor variant that only takes `ByteBufFormat`
__Modification__
Added the missing constructor variant.
__Result__
`LoggingHandler` can be constructed with `ByteBufFormat` only.
Co-authored-by: Nitesh Kant <nitesh_kant@apple.com>
Use Two way algorithm to optimize ByteBufUtil.indexOf() method
Motivation:
ByteBufUtil.indexOf can be inefficient for substring search on
ByteBuf, in terms of algorithm complexity (O(needle.readableBytes * haystack.readableBytes)), consider using the Two Way algorithm to optimize the ByteBufUtil.indexOf() method
Modification:
Use the Two Way algorithm to optimize ByteBufUtil.indexOf() method.
Result:
The performance of the ByteBufUtil.indexOf() method is higher than the original implementation
Motivation:
Due a bug we did not pass the correct remote and localaddress to the next handler if the outbound portion of the CombinedChannelDuplexHandler was removed
Modifications:
- Call the correct connect(...) method
- Refactor tests to test that the parameters are correctly passed on
- Remvoe some code duplication in the tests
Result:
CombinedChannelDuplexHandler correctly pass parameters on
Motivation:
We need to ensure we always "consumed" all alerts etc via SSLEngine.wrap(...) before we teardown the engine. Failing to do so may lead to a situation where the remote peer will not be able to see the actual cause of the handshake failure but just see the connection being closed.
Modifications:
Correctly return HandshakeStatus.NEED_WRAP when we need to wrap some data first before we shutdown the engine because of a handshake failure.
Result:
Fixes https://github.com/netty/netty/issues/11388
__Motivation__
`HttpUtil#normalizeAndGetContentLength()` throws `StringIndexOutOfBoundsException` for empty `content-length` values, it should instead throw `IllegalArgumentException` for all invalid values.
__Modification__
- Throw `IllegalArgumentException` if the `content-length` value is empty.
- Add tests
__Result__
Fixes https://github.com/netty/netty/issues/11408
Motivation:
WeakOrderQueue would drop object that has been recycled, even when it has space for it.
WeakOrderQueue#add should check DefaultHandler.hasBeenRecycler field first
Modifications:
WeakOrderQueue test the DefaultHandler.hasBeenRecycler first
Result:
WeakOrderQueue would not drop object that has been recycled when there is space
Co-authored-by: Norman Maurer <norman_maurer@apple.com>
Co-authored-by: Trustin Lee <t@motd.kr>
Motivation:
We need to use a GraalVM dependency which uses GPL2 + CE.
Modifications:
- Update all graalvm dependencies to new GAV which introduces a license change from GPL2 to GPL2 + CE
- This also required a small bump on the general version from 19.2 to 19.3, which should be fine as 19.3 is an official maintained LTS version, while 19.2 wasn't.
Result:
Fixes: #11398
Signed-off-by: Paulo Lopes <pmlopes@gmail.com>
Motivation:
Native image compatibility is fragile and breaks easily, so we need a PR build to tell us when this happens.
Modification:
Add a graalvm-based build to the PR build matrix.
Result:
Every PR is now also tested on Graal.
Motivation:
At the moment BoringSSL doesnt support explicit set the TLSv1.3 ciphers that should be used. If TLSv1.3 should be used it just enables all ciphers. We should better log if the user tries to explicit set a specific ciphers and using BoringSSL to inform the user that what is tried doesnt really work.
Modifications:
Log if the user tries to not use all TLSv1.3 ciphers and use BoringSSL
Result:
Easier for the user to understand why always all TLSv1.3 ciphers are enabled when using BoringSSL
Co-authored-by: Trustin Lee <trustin@gmail.com>
Motivation:
Netty will fail a handshake for the Per-Message Deflate WebSocket
extension if the server response contains a smaller
`server_max_window_bits` value than the client offered.
However, this is allowed by RFC 7692:
> A server accepts an extension negotiation offer with this parameter
> by including the “server_max_window_bits” extension parameter in the
> extension negotiation response to send back to the client with the
> same or smaller value as the offer.
Modifications:
- Allow the server to respond with a smaller value than offered.
- Change the unit tests to test for this.
Result:
The client will not fail when the server indicates it is using a
smaller window size than offered by the client.
