Motivation:
When writing an Http2WindowUpdateFrame to an Http2FrameCodec, the
ChannelPromise is never satisfied, so callers cannot generically rely on the
write future being satisfied on success.
Modifications:
When writing Http2WindowUpdateFrame, Http2FrameCodec now satisfies the
ChannelPromise immediately.
Result:
The write future is satisfied on successful writes.
Fixesnetty/netty#5530.
Motivation:
DefaultHttp2RemoteFlowController.writePendingBytes does not support reentry but does not enforce this constraint. Reentry is possible if the channel transitions from Writable -> Not Writable -> Writable during the distribution phase. This can happen if the user flushes when notified of the channel transitioning to the not writable state, and may be done if the user wants to fill the channel outbound buffer before flushing.
Modifications:
- DefaultHttp2RemoteFlowController.writePendingBytes should protect against reentry
Result:
DefaultHttp2RemoteFlowController will not allocate unexpected amounts or enter an infinite loop.
Motivation:
DefaultPromise has a listeners member variable which is volatile to allow for an optimization which makes notification of listeners less expensive when there are no listeners to notify. However this change makes all other operations involving the listeners member variable more costly. This optimization which requires listeners to be volatile can be removed to avoid volatile writes/reads for every access on the listeners member variable.
Modifications:
- DefaultPromise listeners is made non-volatile and the null check optimization is removed
Result:
DefaultPromise.listeners is no longer volatile.
Motivation:
DefaultPromise has a listeners member variable which is volatile to allow for an optimization which makes notification of listeners less expensive when there are no listeners to notify. However this change makes all other operations involving the listeners member variable more costly. This optimization which requires listeners to be volatile can be removed to avoid volatile writes/reads for every access on the listeners member variable.
Modifications:
- DefaultPromise listeners is made non-volatile and the null check optimization is removed
Result:
DefaultPromise.listeners is no longer volatile.
Motivation:
HPACK Encoder has a data structure which is similar to a previous version of DefaultHeaders. Some of the same improvements can be made.
Motivation:
- Enforce the restriction that the Encoder's headerFields length must be a power of two so we can use masking instead of modulo
- Use AsciiString.hashCode which already has optimizations instead of having yet another hash code algorithm in Encoder
Result:
Fixes https://github.com/netty/netty/issues/5357
Motivation:
PlatformDependent attempts to use reflection to get the underlying char[] (or byte[]) from String objects. This is fragile as if the String implementation does not utilize the full array, and instead uses a subset of the array, this optimization is invalid. OpenJDK6 and some earlier versions of OpenJDK7 String have the capability to use a subsection of the underlying char[].
Modifications:
- PlatformDependent should not attempt to use the underlying array from String (or other data types) via reflection
Result:
PlatformDependent hash code generation for CharSequence does not depend upon specific JDK implementation details.
Motivation:
The HTTP/2 RFC states in https://tools.ietf.org/html/rfc7540#section-6.8 that Endpoints MUST NOT increase the value they send in the last stream identifier however we don't enforce this when decoding GOAWAY frames.
Modifications:
- Throw a connection error if the peer attempts to increase the lastStreamId in a GOAWAY frame
Result:
RFC is more strictly enforced.
Motivation:
Quote from issue 4914:
"Http2MultiplexCodec currently does two things: mapping the existing h2 API to frames and managing the child channels.
It would be better if the two parts were separated. This would allow less-coupled development of the HTTP/2 handlers (flow control could be its own handler, for instance) and allow applications to insert themselves between all streams and the codec, which permits custom logic and could be used, in part, to implement custom frame types.
It would also greatly ease testing, as the child channel could be tested by itself without dealing with how frames are encoded on the wire."
Modifications:
- Split the Http2MultiplexCodec into Http2FrameCodec and Http2MultiplexCodec. The Http2FrameCodec interacts with the existing HTTP/2 callback-based API, while the Http2MulitplexCodec is completely independent of it and simply multiplexes Http2StreamFrames to the child channels. Additionally, the Http2Codec handler is introduced, which is a convenience class that simply sets up the Http2FrameCodec and Http2MultiplexCodec in the channel pipeline and removes itself.
- Improved test coverage quite a bit.
Result:
- The original Http2MultiplexCodec is split into Http2FrameCodec and Http2MultiplexCodec.
- More tests for higher confidence in the code.
Motivation:
PR #5355 modified interfaces to reduce GC related to the HPACK code. However this came with an anticipated performance regression related to HpackUtil.equals due to AsciiString's increase cost of charAt(..). We should mitigate this performance regression.
Modifications:
- Introduce an equals method in PlatformDependent which doesn't leak timing information and use this in HpcakUtil.equals
Result:
Fixes https://github.com/netty/netty/issues/5436
Motivation:
The HTTP/2 specification requires the pad length field of DATA, HEADERS and PUSH_PROMISE frames to be counted towards the flow control window. The current implementation doesn't do so (See #5434).
Furthermore, it's currently not possible to add one byte padding, as this would add the one byte pad length field as well as append one padding byte to the end of the frame.
Modifications:
Include the one byte pad length field in the padding parameter of the API. Thereby extending the allowed value range by one byte to 256 (inclusive). On the wire, a one byte padding is encoded with a pad length field with value zero and a 256 byte padding is encoded with a pad length field with value 255 and 255 bytes append to the end of the frame.
Result:
More correct padding.
Motivations:
The HPACK code was not really optimized and written with Netty types in mind. Because of this a lot of garbage was created due heavy object creation.
This was first reported in [#3597] and https://github.com/grpc/grpc-java/issues/1872 .
Modifications:
- Directly use ByteBuf as input and output
- Make use of ByteProcessor where possible
- Use AsciiString as this is the only thing we need for our http2 usage
Result:
Less garbage and better usage of Netty apis.
Motivation:
These methods were recently deprecated. However, they remained in use in several locations in Netty's codebase.
Modifications:
Netty's code will now access the bootstrap config to get the group or child group.
Result:
No impact on functionality.
Motivation:
If a single DATA frame ends up being decompressed into multiple frames by DelegatingDecompressorFrameListener the flow control accounting is delayed until all frames have been decompressed. However it is possible the user may want to return bytes to the flow controller which were not included in the onDataRead return value. In this case the amount of processed bytes has not been incremented and will lead to negative value for processed bytes.
Modifications:
- Http2Decompressor.incrementProcessedBytes should be called each time onDataRead is called to ensure all bytes are accounted for at the correct time
Result:
Fixes https://github.com/netty/netty/issues/5375
Motivation:
We use pre-instantiated exceptions in various places for performance reasons. These exceptions don't include a stacktrace which makes it hard to know where the exception was thrown. This is especially true as we use the same exception type (for example ChannelClosedException) in different places. Setting some StackTraceElements will provide more context as to where these exceptions original and make debugging easier.
Modifications:
Set a generated StackTraceElement on these pre-instantiated exceptions which at least contains the origin class and method name. The filename and linenumber are specified as unkown (as stated in the javadocs of StackTraceElement).
Result:
Easier to find the origin of a pre-instantiated exception.
Motivation:
JCTools supports both non-unsafe, unsafe versions of queues and JDK6 which allows us to shade the library in netty-common allowing it to stay "zero dependency".
Modifications:
- Remove copy paste JCTools code and shade the library (dependencies that are shaded should be removed from the <dependencies> section of the generated POM).
- Remove usage of OneTimeTask and remove it all together.
Result:
Less code to maintain and easier to update JCTools and less GC pressure as the queue implementation nt creates so much garbage
Motivation:
Http2ConnectionHandler will always send a GO_AWAY when the channel is closed. This may cause problems if the user is attempting to control when GO_AWAY is sent and the content of the GO_AWAY.
Modifications:
- When the channel is closed Http2ConnectionHandler should only send a GO_AWAY if one has not already been sent
Result:
The user has more control over when GO_AWAY is sent
Fixes https://github.com/netty/netty/issues/5307
Motivation:
The user may specify to use a different allocator then the default. In this case we need to ensure it is shared when creating the EmbeddedChannel inside of a ChannelHandler
Modifications:
Use the config of the "original" Channel in the EmbeddedChannel and so share the same allocator etc.
Result:
Same type of buffers are used.
Motivation:
Performing a server upgrade with a new initial flow control window will cause an NPE in the DefaultHttp2RemoteFlowController. This is due to the fact that the monitor does not check whether or not the channel is writable.
Modifications:
Added a check for channel writability before calling `writePendingBytes`. Also fixed a unit test that was supposed to be testing this :).
Result:
Fixes#5301
Motivation:
At the moment the user is responsible to increase the writer index of the composite buffer when a new component is added. We should add some methods that handle this for the user as this is the most popular usage of the composite buffer.
Modifications:
Add new methods that autoamtically increase the writerIndex when buffers are added.
Result:
Easier usage of CompositeByteBuf.
Motivation:
The HPACK code currently disallows empty header names. This is not explicitly forbidden by the HPACK RFC https://tools.ietf.org/html/rfc7541. However the HTTP/1.x RFC https://tools.ietf.org/html/rfc7230#section-3.2 and thus HTTP/2 both disallow empty header names, and so this precondition check should be moved from the HPACK code to the protocol level.
HPACK also requires that string literals which are huffman encoded must be treated as an encoding error if the string has more than 7 trailing padding bits https://tools.ietf.org/html/rfc7541#section-5.2, but this is currently not enforced.
Result:
- HPACK to allow empty header names
- HTTP/1.x and HTTP/2 header validation should not allow empty header names
- Enforce max of 7 trailing padding bits
Result:
Code is more compliant with the above mentioned RFCs
Fixes https://github.com/netty/netty/issues/5228
Related: #4333#4421#5128
Motivation:
slice(), duplicate() and readSlice() currently create a non-recyclable
derived buffer instance. Under heavy load, an application that creates a
lot of derived buffers can put the garbage collector under pressure.
Modifications:
- Add the following methods which creates a non-recyclable derived buffer
- retainedSlice()
- retainedDuplicate()
- readRetainedSlice()
- Add the new recyclable derived buffer implementations, which has its
own reference count value
- Add ByteBufHolder.retainedDuplicate()
- Add ByteBufHolder.replace(ByteBuf) so that..
- a user can replace the content of the holder in a consistent way
- copy/duplicate/retainedDuplicate() can delegate the holder
construction to replace(ByteBuf)
- Use retainedDuplicate() and retainedSlice() wherever possible
- Miscellaneous:
- Rename DuplicateByteBufTest to DuplicatedByteBufTest (missing 'D')
- Make ReplayingDecoderByteBuf.reject() return an exception instead of
throwing it so that its callers don't need to add dummy return
statement
Result:
Derived buffers are now recycled when created via retainedSlice() and
retainedDuplicate() and derived from a pooled buffer
Motivation:
We tried to provide the ability for the user to change the semantics of the threading-model by delegate the invoking of the ChannelHandler to the ChannelHandlerInvoker. Unfortunually this not really worked out quite well and resulted in just more complexity and splitting of code that belongs together. We should remove the ChannelHandlerInvoker again and just do the same as in 4.0
Modifications:
Remove ChannelHandlerInvoker again and replace its usage in Http2MultiplexCodec
Result:
Easier code and less bad abstractions.
Motivation:
We need to ensure we release all ReferenceCounted objects during tests to not leak.
Modifications:
Fix possible leaks by calling release()
Result:
No more leaks in tests.
Motivation:
Everything in the http2 package should be considered unstable for now
Modifications:
Add missing annotation on Http2ServerDowngrader
Result:
Clearly mark class as unstable.
Motivation:
We're leaking requests in our Http2ServerDowngrader tests when we
allocate a buffer using the local allocator.
Modification:
Release the request later when the request is constructed with the local
allocator.
Result:
Less leaky tests.
Motivation:
The DefaultHttp2Conneciton.close method accounts for active streams being iterated and attempts to avoid reentrant modifications of the underlying stream map by using iterators to remove from the stream map. However there are a few issues:
- While iterating over the stream map we don't prevent iterations over the active stream collection
- Removing a single stream may actually remove > 1 streams due to closed non-leaf streams being preserved in the priority tree which may result in NPE
Preserving closed non-leaf streams in the priority tree is no longer necessary with our current allocation algorithms, and so this feature (and related complexity) can be removed.
Modifications:
- DefaultHttp2Connection.close should prevent others from iterating over the active streams and reentrant modification scenarios which may result from this
- DefaultHttp2Connection should not keep closed stream in the priority tree
- Remove all associated code in DefaultHttp2RemoteFlowController which accounts for this case including the ReducedState object
- This includes fixing writability changes which depended on ReducedState
- Update unit tests
Result:
Fixes https://github.com/netty/netty/issues/5198
Motivation:
http/2 and http/1.1 have similar protocols, and it's useful to be able
to implement a single server against a single interface. There's an
injection from http/1.1 messages to http/2 ones, so it makes sense to
make folks program against http/1.1 and upgrade them under the hood.
Modifications:
added a MessageToMessageCodec<Http2StreamFrame, HttpObject> which turns
every kind of Http2StreamFrame domain object into an HttpObject domain
object, and then back again on the way out. This one is specialized for
servers, but it should be straightforward to make a symmetric one for
clients, or else extend this one.
Result:
fixes#5199, and it's now simple to make your Http2MultiplexCodec speak
Http1.1
Motivation:
Some codecs should be considered unstable as these are relative new. For this purpose we should introduce an annotation which these codecs should us to be marked as unstable in terms of API.
Modifications:
- Add UnstableApi annotation and use it on codecs that are not stable
- Move http2.hpack to http2.internal.hpack as it is internal.
Result:
Better document unstable APIs.
Motivation:
The format of some log lines used the printf style formatting instead of the logger {} formatting for variables. This would lead to printing out the literal printf tokens instead of substituting the value.
Modifications:
- Fix the format string for log statements which use printf style formatting
Result:
Logs actually capture the value of the variables instead of fixed string tokens.
Motivation:
DefaultHttp2FrameReader will stop reading data if any exception is thrown. However some exceptions are recoverable and we will lose data if we don't continue reading. For example some stream errors are recoverable.
Modifications:
- DefaultHttp2FrameReader should attempt to continue reading if a stream error is encountered.
Result:
Fixes https://github.com/netty/netty/issues/5186
Motivation:
We lately added ByteBuf.isReadOnly() which allows to detect if a buffer is read-only or not. We should add ByteBuf.asReadOnly() to allow easily access a read-only version of a buffer.
Modifications:
- Add ByteBuf.asReadOnly()
- Deprecate Unpooled.unmodifiableBuffer(Bytebuf)
Result:
More consistent api.
