Motivation
The current event loop shutdown logic is quite fragile and in the
epoll/NIO cases relies on the default 1 second wait/select timeout that
applies when there are no scheduled tasks. Without this default timeout
the shutdown would hang indefinitely.
The timeout only takes effect in this case because queued scheduled
tasks are first cancelled in
SingleThreadEventExecutor#confirmShutdown(), but I _think_ even this
isn't robust, since the main task queue is subsequently serviced which
could result in some new scheduled task being queued with much later
deadline.
It also means shutdowns are unnecessarily delayed by up to 1 second.
Modifications
- Add/extend unit tests to expose the issue
- Adjust SingleThreadEventExecutor shutdown and confirmShutdown methods
to explicitly add no-op tasks to the taskQueue so that the subsequent
event loop iteration doesn't enter blocking wait (as looks like was
originally intended)
Results
Faster and more robust shutdown of event loops, allows removal of the
default wait timeout
Motivation:
We should correctly reset the cached local and remote address when a Channel.disconnect() is called and the channel has a notion of disconnect vs close (for example DatagramChannel implementations).
Modifications:
- Correctly reset cached kicak abd remote address
- Update testcase to cover it and so ensure all transports work in a consistent way
Result:
Correctly handle disconnect()
Motivation:
At the moment it is not possible to build netty on a power 8 systems.
Modifications:
- Improve detection of the possibility of using Conscrypt
- Skip testsuite-shading when not on x86_64 as this is the only platform for which we build tcnative atm
- Only include classifier if on x86_64 for tcnative as dependency as this is the only platform for which we build tcnative atm
- Better detect if UDT test can be run
Result:
Fixes https://github.com/netty/netty/issues/9479
Motivation:
291f80733a introduced a change to use a byte[] to construct the InetAddress when receiving datagram messages to reduce the overhead. Unfortunally it introduced a regression when handling IPv6-mapped-IPv4 addresses and so produced an IndexOutOfBoundsException when trying to fill the byte[] in native code.
Modifications:
- Correctly use the offset on the pointer of the address.
- Add testcase
- Make tests more robust and include more details when the test fails
Result:
No more IndexOutOfBoundsException
Motivation:
We should also use sendmmsg on connected channels whenever possible to reduce the overhead of syscalls.
Modifications:
No matter if the channel is connected or not try to use sendmmsg when supported to reduce the overhead of syscalls
Result:
Better performance on connected UDP channels due less syscalls
Motivation:
394a1b3485 introduced the possibility to use recvmmsg(...) but did not correctly handle ipv6 mapped ip4 addresses to make it consistent with other transports.
Modifications:
- Correctly handle ipv6 mapped ipv4 addresses by only copy over the relevant bytes
- Small improvement on how to detect ipv6 mapped ipv4 addresses by using memcmp and not byte by byte compare
- Adjust test to cover this bug
Result:
Correctly handle ipv6 mapped ipv4 addresses
Motivation:
When using datagram sockets which need to handle a lot of packets it makes sense to use recvmmsg to be able to read multiple datagram packets with one syscall.
Modifications:
- Add support for recvmmsg on linux
- Add new EpollChannelOption.MAX_DATAGRAM_PACKET_SIZE
- Add tests
Result:
Fixes https://github.com/netty/netty/issues/8446.
Motivation:
If all we need is the FileChannel we should better use RandomAccessFile as FileInputStream and FileOutputStream use a finalizer.
Modifications:
Replace FileInputStream and FileOutputStream with RandomAccessFile when possible.
Result:
Fixes https://github.com/netty/netty/issues/8078.
Motivation:
We did not have support for enable / disable loopback mode in our native epoll transport and also missed the implemention to access the configured interface.
Modifications:
Add implementation and adjust test to cover it
Result:
More complete multicast support with native epoll transport
Motivation:
Provide epoll/native multicast to support high load multicast users (we are using it for a high load telecomm app at my day job).
Modification:
Added support for source specific and any source multicast for epoll transport. Some caveats: no support for disabling loop back mode, retrieval of interface and block operation, all of which tend to be less frequently used.
Result:
Provides epoll transport multicast for common use cases.
Co-authored-by: Norman Maurer <norman_maurer@apple.com>
Motivation:
The current KQueueEventLoop implementation does not process concurrent domain socket channel registration/unregistration in the order they actual
happen since unregistration are delated by an event loop task scheduling. When a domain socket is closed, it's file descriptor might be reused
quickly and therefore trigger a new channel registration using the same descriptor.
Consequently the KQueueEventLoop#add(AbstractKQueueChannel) method will overwrite the current inactive channels having the same descriptor
and the delayed KQueueEventLoop#remove(AbstractKQueueChannel) will remove the active channel that replaced the inactive one.
As active channels are registered, events for this file descriptor won't be processed anymore and the channels will never be closed.
The same problem can also happen in EpollEventLoop. Beside this we also may never remove the AbstractEpollChannel from the internal map
when it is unregistered which will prevent it from be GC'ed
Modifications:
- Change logic of native KQueue and Epoll implementations to ensure we correctly handle the case of FD reuse
- Only try to update kevent / epoll if the Channel is still open (as otherwise it will be handled by kqueue / epoll itself)
- Correctly remove AbstractEpollChannel from internal map in all cases
- Make implementation of closeAll() consistent for Epoll and KQueueEventLoop
Result:
KQueue and Epoll native transports correctly handle FD reuse
Co-authored-by: Norman Maurer <norman_maurer@apple.com>
Motivation:
86dd388637 reverted the usage of IPv6 Multicast test. This commit makes the whole multicast testing a lot more robust by selecting the correct interface in any case and also reverts the `@Ignore`
Modifications:
- More robust multicast testing by selecting the right NetworkInterface
- Remove the `@Ignore` again for the IPv6 test
Result:
More robust multicast testing
Motivation:
The multicast ipv6 test fails on some systems. As I just added it let me ignore it for now while investigating.
Modifications:
Add @ignore
Result:
Stable testsuite while investigate
Motivation:
We currently only cover ipv4 multicast in the testsuite but we should also have tests for ipv6.
Modifications:
- Add test for ipv6
- Ensure we only try to run multicast test for ipv4 / ipv6 if the loopback interface supports it.
Result:
Better test coverage
Motivation:
Systems depending on Netty may benefit (telemetry, alternative even loop scheduling algorithms) from knowing the number of channels assigned to each EventLoop.
Modification:
Expose the number of channels registered in the EventLoop via SingleThreadEventLoop.registeredChannels.
Result:
Fixes#8276.
Motivation:
Since DomainSocketChannel is a DuplexChannel, which be able to shutdown input or output individually on demands, but ALLOW_HALF_CLOSURE channel option has not been supported yet.
I thought this could be a missing feature of Unix domain socket, so here the PR for it.
Modifications:
1. Added allHalfClosure property both in EpollDomainSocketChannelConfig and KQueueDomainSocketChannelConfig,
2. Enabled isAllowHalfClosure method of native channel to support domain channel config,
3. Created EpollDomainSocketShutdownOutputByPeerTest and KQueueDomainSocketShutdownOutputByPeerTest to verify the change.
Result:
ALLOW_HALF_CLOSURE channel option can be set with DomainSocketChannel, and no more warning of Unknown channel option 'ALLOW_HALF_CLOSURE'.
Motivation:
Netty is very widely used which can lead to a lot of pain when we break API / ABI. We should make use japicmp-maven-plugin during the build to verify we do not introduce breakage by mistake.
Modifications:
- Add japicmp-maven-plugin to the build process
- Fix a method signature change in HttpProxyHandler that was flagged as a possible problem.
Result:
Ensure no API/ABI breakage accour between releases.
Motivation:
We should run a CI job using J9 to ensure netty also works when using different JVMs.
Modifications:
- Adjust PooledByteBufAllocatorTest to be able to complete faster when using a JVM which takes longer when joining Threads (this seems to be the case with J9).
- Skip UDT tests on J9 as UDT is not supported there.
Result:
Be able to run CI against J9.
Motivation:
`DefaultFileRegion.transferTo` will return 0 all the time when we request more data then the actual file size. This may result in a busy spin while processing the fileregion during writes.
Modifications:
- If we wrote 0 bytes check if the underlying file size is smaller then the requested count and if so throw an IOException
- Add DefaultFileRegionTest
- Add a test to the testsuite
Result:
Fixes https://github.com/netty/netty/issues/8868.
Motivation:
The SSLEngine does provide a way to signal to the caller that it may need to execute a blocking / long-running task which then can be offloaded to an Executor to ensure the I/O thread is not blocked. Currently how we handle this in SslHandler is not really optimal as while we offload to the Executor we still block the I/O Thread.
Modifications:
- Correctly support offloading the task to the Executor while suspending processing of SSL in the I/O Thread
- Add new methods to SslContext to specify the Executor when creating a SslHandler
- Remove @deprecated annotations from SslHandler constructor that takes an Executor
- Adjust tests to also run with the Executor to ensure all works as expected.
Result:
Be able to offload long running tasks to an Executor when using SslHandler. Partly fixes https://github.com/netty/netty/issues/7862 and https://github.com/netty/netty/issues/7020.
Motivation:
In the native code EpollDatagramChannel / KQueueDatagramChannel creates a DatagramSocketAddress object for each received UDP datagram even when in connected mode as it uses the recvfrom(...) / recvmsg(...) method. Creating these is quite heavy in terms of allocations as internally, char[], String, Inet4Address, InetAddressHolder, InetSocketAddressHolder, InetAddress[], byte[] objects are getting generated when constructing the object. When in connected mode we can just use regular read(...) calls which do not need to allocate all of these.
Modifications:
- When in connected mode use read(...) and NOT recvfrom(..) / readmsg(...) to reduce allocations when possible.
- Adjust tests to ensure read works as expected when in connected mode.
Result:
Less allocations and GC when using native datagram channels in connected mode. Fixes https://github.com/netty/netty/issues/8770.
Motivation:
In the test we assume some semantics on how RST is done that are not true for Windows so we should skip it.
Modifications:
Skip test when on windows.
Result:
Be able to run testsuite on windows. Fixes https://github.com/netty/netty/issues/8571.
Motivation:
Most of the maven modules do not explicitly declare their
dependencies and rely on transitivity, which is not always correct.
Modifications:
For all maven modules, add all of their dependencies to pom.xml
Result:
All of the (essentially non-transitive) depepdencies of the modules are explicitly declared in pom.xml
Motivation:
TLSv1.3 support is included in java11 and is also supported by OpenSSL 1.1.1, so we should support when possible.
Modifications:
- Add support for TLSv1.3 using either the JDK implementation or the native implementation provided by netty-tcnative when compiled against openssl 1.1.1
- Adjust unit tests for semantics provided by TLSv1.3
- Correctly handle custom Provider implementations that not support TLSv1.3
Result:
Be able to use TLSv1.3 with netty.
