Motivation:
It is common, especially in frameworks, for the parameters to `SslContextBuilder` methods to be built up as a `List` or similar `Iterable`. It is currently difficult to use `SslContextBuilder` in this case because it requires a conversion to array.
Modification:
Add overloads for methods that accept varargs to also accept `Iterable`, delegating by copying into an array.
Result:
Fixes#9293
Motivation
Currently doc != code and so one needs to change. Though behaviour as
currently documented might be more intuitive, we don't want to break
anyone so will adjust the doc instead. See #9503 for discussion.
Modifications
Correct the javadoc of indexOf(...) method in ByteBuf abstract class.
Results
Correct javadoc
Motivation:
Netty should respect JVM flags to control SSL protocols, eg. `-Djdk.tls.client.protocols`
Modification:
Changed `JdkSslContext` to use `SSLContext.getDefaultSSLParameters().getProtocols()` instead of `engine.getSupportedProtocols()` which is hardcoded as `SSLv2Hello, SSLv3, TLSv1, TLSv1.1, TLSv1.2`.
Result:
Without `-Djdk.tls.client.protocols`, `SSLContext.getDefaultSSLParameters().getProtocols()` returns `TLSv1, TLSv1.1, TLSv1.2`.
With `-Djdk.tls.client.protocols=TLSv1.2`, `SSLContext.getDefaultSSLParameters().getProtocols()` returns `TLSv1.2`.
Fixes#9706
Motivation:
Constant time comparison functions are used to compare HTTP/2 header
values, even if they are not sensitive.
Modification:
After checking for sensitivity, use fast comparison.
Result: Faster HPACK table reads/writes
Motivation:
In PR https://github.com/netty/netty/pull/9695 IdleStateEvents
were made to cache their string representation. The reason for this
was to avoid creating garbage as these values would be used frequently.
However, these objects may be used on multiple event loops and this
may cause an unexpected race to occur.
Modification:
Only make the events that Netty creates cache their toString representation.
Result:
No races.
Motivation:
We should aim to always use heap buffers when using the JDK SSLEngine for now as it wants to operate on byte[] and so will do internal memory copies if a non heap buffer is used. Beside this it will always return BUFFER_OVERFLOW when a smaller buffer then 16kb is used when calling wrap(...) (even if a very small amount of bytes should be encrypted). This can lead to excercive direct memory usage and pressure for no good reason.
Modifications:
Refactor internals of SslHandler to ensure we use heap buffers for the JDK SSLEngine impelementation
Result:
Less direct memory usage when JDK SSLEngine implementation is used
FlowControllerHandler currently may swell read-complete events in some situations.
* Fire read-complete event from flow controller, when it previously was swallowed
* New unit test to cover this case
Fixes#9667: FlowControllerHandler swallows read-complete event when auto-read is disabled
IdleStateEvent is very convenient and frequently used type of events. However both in runtime (logs) and in debug you need some manual steps to see their actual content. Default implementation generates worthless trash like this:
io.netty.handler.timeout.IdleStateEvent@27f674d
There are examples already, where event has convenient and useful toString implementation:
* io.netty.handler.proxy.ProxyConnectionEvent
* io.netty.handler.ssl.SslCompletionEvent
* Implement 'IdleStateEvent.toString' method.
* Unit test.
More useful String representation of IdleStateEvent
Motivation:
HttpPostRequestDecoder.splitHeaderContentType() throws a StringIndexOutOfBoundsException when it parses a Content-Type header that starts with a semicolon ;. We should skip the execution for incorrect multipart form data.
Modification:
Avoid invocation of HttpPostRequestDecoder#splitHeaderContentType(...) for incorrect multipart form data content-type.
Result:
Fixes#8554
Motivation:
We have a public utility `OpenSsl.isAlpnSupported()` that helps users to
check if ALPN is available for `SslProvider.OPENSSL`. However, we do not
provide a similar utility for `SslProvider.JDK`. Therefore, users who
configured ALPN with `SslProvider.JDK` will get a runtime exception at
the time when a new connection will be created.
Modifications:
- Add public `SslProvider.isAlpnSupported(SslProvider)` utility method
that returns `true` if the `SslProvider` supports ALPN;
- Deprecate `OpenSsl.isAlpnSupported()`;
Result:
Users can verify if their environment supports ALPN with
`SslProvider` upfront (at bootstrap), instead of failing with
runtime exception when a new connection will be created.
Motivation:
Sometimes it is useful to be able to set attributes on a SslContext.
Modifications:
Add new method that will return a AttributeMap that is tied to a SslContext instance
Result:
Fixes https://github.com/netty/netty/issues/6542.
Motivation:
We may fail to update the flow-controller and in this case need to notify the stream channel and close it.
Modifications:
Attach a future to the write of the update frame and in case of a failure propagate it to the channel and close it
Result:
Fixes https://github.com/netty/netty/issues/9663
Motivation:
We should just ignore (and so skip) invalid entries in /etc/resolver.conf.
Modifications:
- Skip invalid entries
- Add unit test
Result:
Fix https://github.com/netty/netty/issues/9684
Motivation:
Data flowing in from the decoder flows out in sequence，Whether decoder removed or not.
Modification:
fire data in out and clear out when hander removed
before call method handlerRemoved(ctx)
Result:
Fixes#9668 .
Motivation:
bbc34d0eda introduced correct handling of "in process" setup of streams but there is some room for improvements. Often the writeHeaders(...) is completed directly which means there is not need to create the extra listener object.
Modifications:
- Only create the listener if we really need too.
Result:
Less GC
Motivation:
In https://github.com/netty/netty/issues/8692, `Http2FrameCodec` was
updated to keep track of all "being initialized" streams, allocating
memory before initialization begins, and releasing memory after
initialization completes successfully.
In some instances where stream initialization fails (e.g. because this
connection has received a GOAWAY frame), this memory is never released.
Modifications:
This change updates the `Http2FrameCodec` to use a separate promise
for monitoring the success of sending HTTP2 headers. When sending of
headers fails, we now make sure to release memory allocated for stream
initialization.
Result:
After this change, failures in writing HTTP2 Headers (e.g. because this
connection has received a GOAWAY frame) will no longer leak memory.
Motivation:
At the moment we do a ByteBuf.readBytes(...) on removal of the ByteToMessageDecoder if there are any bytes left and forward the returned ByteBuf to the next handler in the pipeline. This is not really needed as we can just forward the cumulation buffer directly and so eliminate the extra memory copy
Modifications:
Just forward the cumulation buffer directly on removal of the ByteToMessageDecoder
Result:
Less memory copies
Motivation
A memory leak related to DNS resolution was reported in #9634,
specifically linked to the TCP retry fallback functionality that was
introduced relatively recently. Upon inspection it's apparent that there
are some error paths where the original UDP response might not be fully
released, and more significantly the TCP response actually leaks every
time on the fallback success path.
It turns out that a bug in the unit test meant that the intended TCP
fallback path was not actually exercised, so it did not expose the main
leak in question.
Modifications
- Fix DnsNameResolverTest#testTruncated0 dummy server fallback logic to
first read transaction id of retried query and use it in replayed
response
- Adjust semantic of internal DnsQueryContext#finish method to always
take refcount ownership of passed in envelope
- Reorder some logic in DnsResponseHandler fallback handling to verify
the context of the response is expected, and ensure that the query
response are either released or propagated in all cases. This also
reduces a number of redundant retain/release pairings
Result
Fixes#9634
Motivation:
There is not need to use a CAS as everything is synchronized anyway. We can simplify the code a bit by not using it.
Modifications:
- Just remove the CAS operation
- Change from int to boolean
Result:
Code cleanup
Motivation:
Currently when the SslHandler coalesces outbound bytes it always
allocates a direct byte buffer. This does not make sense if the JDK
engine is being used as the bytes will have to be copied back to heap
bytes for the engine to operate on them.
Modifications:
Inspect engine type when coalescing outbound bytes and allocate heap
buffer if heap bytes are preferred by the engine.
Result:
Improved performance for JDK engine. Better performance in environments
without direct buffer pooling.
Motivation:
We should use the latest commons-compress release to fix CVE-2019-12402 (even it is only a test dependency)
Modifications:
Update commons-compress to 1.19
Result:
Fix security alert
### Motivation:
I've now found two libraries that use Netty to be vulnerable to [CWE-113: Improper Neutralization of CRLF Sequences in HTTP Headers ('HTTP Response Splitting')](https://cwe.mitre.org/data/definitions/113.html) due to using `new DefaultHttpHeaders(false)`.
Some part of me hopes that this warning will help dissuade library authors from disabling this important security check.
### Modification:
Add documentation to `DefaultHttpHeaders(boolean)` to warn about the implications of `false`.
### Result:
This improves the documentation on `DefaultHttpHeaders`.
Motivation:
In the current implementation of Base64 decoder an invalid
character `\u00BD` treated as `=`.
Also character `\u007F` leads to ArrayIndexOutOfBoundsException.
Modification:
Explicitly checks that all input bytes are ASCII characters
(greater than zero). Fix `decodabet` tables.
Result:
Correctly validation input bytes in Base64 decoder.
Motivation:
031c2e2e88 introduced some change to reduce the risk of have the `ReferenceCountedOpenSslContext` be destroyed while the `ReferenceCountedSslEngine` is still in us. Unfortunaly it missed to adjust a few tests which make assumptions about the refCnt of the context.
Modifications:
Adjust tests to take new semenatics into acount.
Result:
No more tests failures
Motivation:
We should not commit vscode specific files, so at it to gitignore
Modifications:
Add files to .gitignore
Result:
Correctly ignore ide related files
Motivation:
We should use adaptjdk 13 and not oracle openjdk 13 when building with Java 13
Modifications:
Use adopt@1.13.0-0
Result:
More consistent java vendor usage
Motivation:
Http2MultiplexCodec extends Http2FrameCodec extends Http2ConnectionHandler. It appears Http2MultiplexCodec overrode the channelWritabilityChanged method, which prevented the flow controller from becoming active. In the case the parent channel becomes unwritable, and then later becomes writable, it needs to indicate that the child channels can still write data. This is slightly confusing, because the child channels may still themselves be unwritable, but should still drain their data to the parent channel.
Modification:
Still propagate writability changes to the HTTP/2 flow controller
Result:
Fixes https://github.com/netty/netty/issues/9636
Motivation
The current event loop shutdown logic is quite fragile and in the
epoll/NIO cases relies on the default 1 second wait/select timeout that
applies when there are no scheduled tasks. Without this default timeout
the shutdown would hang indefinitely.
The timeout only takes effect in this case because queued scheduled
tasks are first cancelled in
SingleThreadEventExecutor#confirmShutdown(), but I _think_ even this
isn't robust, since the main task queue is subsequently serviced which
could result in some new scheduled task being queued with much later
deadline.
It also means shutdowns are unnecessarily delayed by up to 1 second.
Modifications
- Add/extend unit tests to expose the issue
- Adjust SingleThreadEventExecutor shutdown and confirmShutdown methods
to explicitly add no-op tasks to the taskQueue so that the subsequent
event loop iteration doesn't enter blocking wait (as looks like was
originally intended)
Results
Faster and more robust shutdown of event loops, allows removal of the default wait timeout.
This is a port of https://github.com/netty/netty/pull/9616
Motivation:
There is a goto statement above the current position of initialize dynamicMethods, and dynamicMethods is used after the goto which might cause undefined behavior.
Modifications:
Initialize dynamicMehtods at the top.
Result:
No more undefined behavior.
Motivation:
Native image compilation is failing without extra flags:
```
Warning: Aborting stand-alone image build. No instances of io.netty.buffer.UnpooledHeapByteBuf are allowed in the image heap as this class should be initialized at image runtime. Object has been initialized by the io.netty.handler.codec.http2.Http2ConnectionHandler class initializer with a trace:
at io.netty.buffer.Unpooled.wrappedBuffer(Unpooled.java:157)
at io.netty.handler.codec.http2.Http2ConnectionHandler.<clinit>(Http2ConnectionHandler.java:74)
. To fix the issue mark io.netty.buffer.UnpooledHeapByteBuf for build-time initialization with --initialize-at-build-time=io.netty.buffer.UnpooledHeapByteBuf or use the the information from the trace to find the culprit and --initialize-at-run-time=<culprit> to prevent its instantiation.
Detailed message:
Trace: object io.netty.buffer.ReadOnlyByteBuf
object io.netty.buffer.UnreleasableByteBuf
method io.netty.handler.codec.http2.Http2ConnectionHandler.access$500()
Call path from entry point to io.netty.handler.codec.http2.Http2ConnectionHandler.access$500():
at io.netty.handler.codec.http2.Http2ConnectionHandler.access$500(Http2ConnectionHandler.java:66)
at io.netty.handler.codec.http2.Http2ConnectionHandler$PrefaceDecoder.readClientPrefaceString(Http2ConnectionHandler.java:299)
at io.netty.handler.codec.http2.Http2ConnectionHandler$PrefaceDecoder.decode(Http2ConnectionHandler.java:239)
at io.netty.handler.codec.http2.Http2ConnectionHandler.decode(Http2ConnectionHandler.java:438)
at io.netty.handler.codec.ByteToMessageDecoder.decodeRemovalReentryProtection(ByteToMessageDecoder.java:505)
at io.netty.handler.codec.ByteToMessageDecoder.callDecode(ByteToMessageDecoder.java:444)
at io.netty.handler.codec.ByteToMessageDecoder.channelRead(ByteToMessageDecoder.java:283)
at io.netty.channel.AbstractChannelHandlerContext.invokeChannelRead(AbstractChannelHandlerContext.java:374)
at io.netty.channel.AbstractChannelHandlerContext.access$600(AbstractChannelHandlerContext.java:56)
at io.netty.channel.AbstractChannelHandlerContext$7.run(AbstractChannelHandlerContext.java:365)
at com.oracle.svm.core.jdk.RuntimeSupport.executeHooks(RuntimeSupport.java:144)
at com.oracle.svm.core.jdk.RuntimeSupport.executeStartupHooks(RuntimeSupport.java:89)
at com.oracle.svm.core.JavaMainWrapper.runCore(JavaMainWrapper.java:143)
at com.oracle.svm.core.JavaMainWrapper.run(JavaMainWrapper.java:186)
at com.oracle.svm.core.code.IsolateEnterStub.JavaMainWrapper_run_5087f5482cc9a6abc971913ece43acb471d2631b(generated:0)
```
Modification:
Add `io.netty.handler.codec.http2.Http2ConnectionHandler` for runtime compilation, as the buffer library's `io.netty.buffer.UnpooledHeapByteBuf` is also marked for runtime.
Result:
Native image compilation works again.
Motivation:
`DefaultHttp2UnknownFrame#equals` may produce NPE due to
incorrect comparison of `stream` field.
Modification:
- Fix the `stream` field compare.
- Cleanup usage of class fields: use direct access instead of getters
(because the class is final).
Result:
No NPE in `equals` method.
Motivation:
Classes `AbstractHttp2StreamChannel.Http2StreamChannelConfig`
and `DnsNameResolver.AddressedEnvelopeAdapter` may be static:
it doesn't reference its enclosing instance.
Modification:
Add `static` modifier.
Result:
Prevents a possible memory leak and uses less memory per class instance.
Motivation:
With the Netty ref-counted OpenSSL implementation the parent SslContext
maintains state necessary for the SslEngine's it produces. However, it's
possible for the parent context to be closed and release those resources
before the child engines are finished which causes problems.
Modification:
Spawned ReferenceCountedOpenSslEngine's retain a reference to their
parent ReferenceCountedOpenSslContext.
Result:
The lifetime of the shared data is extended to include the lifetime of
the dependents.
Motivation:
On JDK > 9 Netty uses Unsafe to write two internal JDK fields: sun.nio.ch.SelectorImp.selectedKeys and sun.nio.ch.SelectorImpl.publicSelectedKeys. This is done in transport/src/main/java/io/netty/channel/nio/NioEventLoop.java:225, in openSelector() method. The GraalVM analysis cannot do the Unsafe registration automatically because the object field offset computation is hidden behind two layers of calls.
Modifications:
This PR updates the Netty GraalVM configuration by registering those fields for unsafe access.
Result:
Improved support for Netty on GraalVM with JDK > 9.
Motivation:
It is not possible to build Netty on an s390_64 platform.
Modifications:
Modify pom.xml so that s390_64 is acceptable as os.detected.arch.
Result:
Netty can be built on an s390_64 platform.
Signed-off-by: Tatsushi Inagaki <e29253@jp.ibm.com>
Motivation:
We would like to enable Netty also on a big endian platform such as
s390_64. We need to fix a function which assumes that the target
platform is little endian.
Modifications:
Modify netty_unix_socket_accept() to write an address length as jbyte
instead of jsize.
Result:
Netty can be enabled on a big endian platform.
Signed-off-by: Tatsushi Inagaki <e29253@jp.ibm.com>
Motivation:
Due a bug we did not always correctly calculate the next buffer size in AdaptiveRecvByteBufAllocator.
Modification:
Fix calculation and add unit test
Result:
Correct calculation is always used.
Motivation
This is another iteration of #9476.
Modifications
Instead of maintaining a count of all writes performed and then using
reads during shutdown to ensure all are accounted for, just set a flag
after each write and don't reset it until the corresponding event has
been returned from epoll_wait.
This requires that while a write is still pending we don't reset
wakenUp, i.e. continue to block writes from the wakeup() method.
Result
Race condition eliminated. Fixes#9362
Co-authored-by: Norman Maurer <norman_maurer@apple.com>
Motivation:
The build script for the module Netty Transport Native Epoll can cause
intermittent build break due to broken pipe by /usr/bin/ldd. This issue
likely to occur on a build environment with multiple processors.
Modifications:
The root cause is that the consumer head command finishes earlier the
producer ldd command. Buffering the outputs of the ldd command by an
intermediate tail command avoids the broken pipe.
Result:
A build on multiple processors can finish successfully.
Signed-off-by: Tatsushi Inagaki <e29253@jp.ibm.com>
Motivation:
At the moment we use Unpooled.buffer(...) in InboundHttp2ToHttpAdapter when we need to do a copy of the message. We should better use the configured ByteBufAllocator for the Channel
Modifications:
Change internal interface to also take the ByteBufAllocator as argument and use it when we need to allocate a ByteBuf.
Result:
Use the "correct" ByteBufAllocator in InboundHttp2ToHttpAdapter in all cases
Motivation:
At the moment we set release to false before we call writeData(...). This could let to the sitatuation that we will miss to release the message if writeData(...) throws. We should set release to false after we called writeData(...) to ensure the ownership of the buffer is correctly transferred.
Modifications:
- Set release to false after writeData(...) was successfully called only
Result:
No possibility for a buffer leak
Motivation:
We did miss to take Http2FrameCodecBuilder.isValidateHeaders() into account when a Http2FrameWriter was set on the builder and always assumed validation should be enabled.
Modifications:
Remove hardcode value and use configured value
Result:
Http2FrameCodecBuilder.isValidateHeaders() is respected in all cases
Motivation:
Recycler$Stack.pop will occurs `ArrayIndexOutOfBoundsException` in some race cases, we should double check `size` even after `scavenge` called.
Modifications:
Double check `size` after `scavenge`
Result:
avoid ArrayIndexOutOfBoundsException in `pop`
Motivation:
aebe206 added support for using a ChannelOption to set / get Buffer sizes but did not add the methods to the DomainSocketChannelConfig interface itself (due not be able to break the API)
Modifications:
Add methods to interface (as this is a next major release)
Result:
Easier access to configure these buffer sizes
Motiviation:
A lot of reentrancy bugs and cycles can happen because the DefaultPromise will notify the FutureListener directly when completely in the calling Thread if the Thread is the EventExecutor Thread. To reduce the risk of this we should always notify the listeners via the EventExecutor which basically means that we will put a task into the taskqueue of the EventExecutor and pick it up for execution after the setSuccess / setFailure methods complete the promise.
Modifications:
- Always notify via the EventExecutor
- Adjust test to ensure we correctly account for this
- Adjust tests that use the EmbeddedChannel to ensure we execute the scheduled work.
Result:
Reentrancy bugs related to the FutureListeners cant happen anymore.
