Motivation:
The SpdyHttpDecoder was modified to support pushed resources that are
divided into multiple frames. The decoder accepts a pushed
SpdySynStreamFrame containing the request headers, followed by a
SpdyHeadersFrame containing the response headers.
Modifications:
This commit modifies the SpdyHttpEncoder so that it encodes pushed
resources in a format that the SpdyHttpDecoder can decode. The encoder
will accept an HttpRequest object containing the request headers,
followed by an HttpResponse object containing the response headers.
Result:
The SpdyHttpEncoder will create a SpdySynStreamFrame followed by a
SpdyHeadersFrame when sending pushed resources.
Motivations:
It seems that slicing a buffer and using this slice to write to CTX will
decrease the initial refCnt to 0, while the original buffer is not yet
fully used (not empty).
Modifications:
As suggested in the ticket and tested, when the currentBuffer is sliced
since it will still be used later on, the currentBuffer is retained.
Add a test case for this issue.
Result:
The currentBuffer still has its correct refCnt when reaching the last
write (not sliced) of 1 and therefore will be released correctly.
The exception does no more occur.
This fix should be applied to all branches >= 4.0.
When handling an oversized message, HttpObjectAggregator does not wait
until the last chunk is received to produce the failed message, making
AggregatedFullHttpMessage.trailingHeaders() return null.
Related: #3019
Motivation:
We have multiple (Full)HttpRequest/Response implementations and only
some of them implements toString() properly.
Modifications:
- Add the reusable string converter for HttpMessages to HttpMessageUtil
- Implement toString() of (Full)HttpRequest/Response implementations
properly using HttpMessageUtil
Result:
Prettier string representation is returned by HttpMessage
implementations.
Motivation:
Even if its against the HTTP RFC there are situations where it may be useful to use other chars then US_ASCII in the headers. We should allow to make it possible by allow the user to override the how headers are encoded.
Modifications:
- Add encodeHeaders(...) method and so allow to override it.
Result:
It's now possible to encode headers with other charset then US_ASCII by just extend the encoder and override the encodeHeaders(...) method.
Motivation:
HEAD requests will have a Content-Length set that doesn't match the
actual length. So we only want to set Content-Length header if it isn't
already set.
Modifications:
If check around setting the Content-Length.
Result:
A HEAD request will no correctly return the specified Content-Length
instead of the body length.
Modifications:
Converted AsciiString into a String by calling toString() method before comparing with equals(). Also added a unit-test to show that it works.
Result:
Major violation is gone. Code is correct.
Motivation:
without this check then given a URI with path /path the resulting URL will be /path?null=
Modifications:
check that getRawQuery doesn't return null and only append if not
Result:
urls of the form /path will not have a null?= appended
Motivations:
The chunkSize might be oversized after comparison (size being > of int
capacity) if file size is bigger than an integer.
Modifications:
Change it to long.
Result:
There is no more int oversized.
Same fix for 4.1 and Master
Motivation:
The new Headers interface contains methods to getTimeMillis but no add/set/contains variants. These should be added for consistency.
Modifications:
- Add three new methods: addTimeMillis, setTimeMillis, containsTimeMillis to the Headers interface.
- Add a new method to the Headers.ValueConverter interface: T convertTimeMillis(long)
- Bring these new interfaces up the class hierarchy
Result:
All Headers classes have setters/getters for timeMillis.
Related: #3157
Motivation:
It should be convenient to have an easy way to classify an
HttpResponseStatus based on the first digit of the HTTP status code, as
defined in the RFC 2616:
- Information 1xx
- Success 2xx
- Redirection 3xx
- Client Error 4xx
- Server Error 5xx
Modification:
- Add HttpStatusClass
- Add HttpResponseStatus.codeClass() that returns the class of the HTTP
status code
Result:
It's easier to determine the class of an HTTP status
Motivation:
I found myself writing AsciiString constants in my code for
response statuses and thought that perhaps it might be nice to have
them defined by Netty instead.
Modifications:
Adding codeAsText to HttpResponseStatus that returns the status code as
AsciiText.
In addition, added the 421 Misdirected Request response code from
https://tools.ietf.org/html/draft-ietf-httpbis-http2-15#section-9.1.2
This response header was renamed in draft 15:
https://tools.ietf.org/html/draft-ietf-httpbis-http2-15#appendix-A.1
But the code itself was not changed, and I thought using the latest would
be better.
Result:
It is now possible to specify a status like this:
new DefaultHttp2Headers().status(HttpResponseStatus.OK.codeAsText());
Motivation:
Found performance issues via FindBugs and PMD.
Modifications:
- Removed unnecessary boxing/unboxing operations in DefaultTextHeaders.convertToInt(CharSequence) and DefaultTextHeaders.convertToLong(CharSequence). A boxed primitive is created from a string, just to extract the unboxed primitive value.
- Added a static modifier for DefaultHttp2Connection.ParentChangedEvent class. This class is an inner class, but does not use its embedded reference to the object which created it. This reference makes the instances of the class larger, and may keep the reference to the creator object alive longer than necessary.
- Added a static compiled Pattern to avoid compile it each time it is used when we need to replace some part of authority.
- Improved using of StringBuilders.
Result:
Performance improvements.
Motivation:
The SPDY/3.1 spec does not adequate describe how to push resources
from the server. This was solidified in the HTTP/2 drafts by dividing
the push into two frames, a PushPromise containing the request,
followed by a Headers frame containing the response.
Modifications:
This commit modifies the SpdyHttpDecoder to support pushed resources
that are divided into multiple frames. The decoder will accept a
pushed SpdySynStreamFrame containing the request headers, followed by
a SpdyHeadersFrame containing the response headers.
Result:
The SpdyHttpDecoder will create an HttpRequest object followed by an
HttpResponse object when receiving pushed resources.
Motivation:
RFC 2616, 4.3 Message Body states that:
All 1xx (informational), 204 (no content), and 304 (not modified) responses MUST NOT include a
message-body. All other responses do include a message-body, although it MAY be of zero length.
Modifications:
HttpContentEncoder was previously modified to cater for HTTP 100 responses. This check is enhanced to
include HTTP 204 and 304 responses.
Result:
Empty response bodies will not be modified to include the compression footer. This footer messed with Chrome's
response parsing leading to "hanging" requests.
Motivation:
HttpObjectDecoder extended ReplayDecoder which is slightly slower then ByteToMessageDecoder.
Modifications:
- Changed super class of HttpObjectDecoder from ReplayDecoder to ByteToMessageDecoder.
- Rewrote decode() method of HttpObjectDecoder to use proper state machine.
- Changed private methods HeaderParser.parse(ByteBuf), readHeaders(ByteBuf) and readTrailingHeaders(ByteBuf), skipControlCharacters(ByteBuf) to consider available bytes.
- Set HeaderParser and LineParser as static inner classes.
- Replaced not safe actualReadableBytes() with buffer.readableBytes().
Result:
Improved performance of HttpObjectDecoder by approximately 177%.
Motiviation:
The HttpContentEncoder does not account for a EmptyLastHttpContent being provided as input. This is useful in situations where the client is unable to determine if the current content chunk is the last content chunk (i.e. a proxy forwarding content when transfer encoding is chunked).
Modifications:
- HttpContentEncoder should not attempt to compress empty HttpContent objects
Result:
HttpContentEncoder supports a EmptyLastHttpContent to terminate the response.
Motivation:
Headers has getTimeMillis(), not getDate()
Modification:
- Replace HttpHeaders.getDate() with getTimeMillis() so that migration
is smoother
Result:
User code which accesses a date header is easier to migrate
Motivation:
The commit 50e06442c3 changed the type of
the constants in HttpHeaders.Names and HttpHeaders.Values, making 4.1
backward-incompatible with 4.0.
It also introduces newer utility classes such as HttpHeaderUtil, which
deprecates most static methods in HttpHeaders. To ease the migration
between 4.1 and 5.0, we should deprecate all static methods that are
non-existent in 5.0, and provide proper counterpart.
Modification:
- Revert the changes in HttpHeaders.Names and Values
- Deprecate all static methods in HttpHeaders in favor of:
- HttpHeaderUtil
- the member methods of HttpHeaders
- AsciiString
- Add integer and date access methods to HttpHeaders for easier future
migration to 5.0
- Add HttpHeaderNames and HttpHeaderValues which provide standard HTTP
constants in AsciiString
- Deprecate HttpHeaders.Names and Values
- Make HttpHeaderValues.WEBSOCKET lowercased because it's actually
lowercased in all WebSocket versions but the oldest one
- Add RtspHeaderNames and RtspHeaderValues which provide standard RTSP
constants in AsciiString
- Deprecate RtspHeaders.*
- Do not use AsciiString.equalsIgnoreCase(CharSeq, CharSeq) if one of
the parameters are AsciiString
- Avoid using AsciiString.toString() repetitively
- Change the parameter type of some methods from String to
CharSequence
Result:
Backward compatibility is recovered. New classes and methods will make
the migration to 5.0 easier, once (Http|Rtsp)Header(Names|Values) are
ported to master.
Motivation:
The header class hierarchy and algorithm was improved on the master branch for versions 5.x. These improvments should be backported to the 4.1 baseline.
Modifications:
- cherry-pick the following commits from the master branch: 2374e17, 36b4157, 222d258
Result:
Header improvements in master branch are available in 4.1 branch.
Motivation:
The requirement for the masking of frames and for checks of correct
masking in the websocket specifiation have a large impact on performance.
While it is mandatory for browsers to use masking there are other
applications (like IPC protocols) that want to user websocket framing and proxy-traversing
characteristics without the overhead of masking. The websocket standard
also mentions that the requirement for mask verification on server side
might be dropped in future.
Modifications:
Added an optional parameter allowMaskMismatch for the websocket decoder
that allows a server to also accept unmasked frames (and clients to accept
masked frames).
Allowed to set this option through the websocket handshaker
constructors as well as the websocket client and server handlers.
The public API for existing components doesn't change, it will be
forwarded to functions which implicetly set masking as required in the
specification.
For websocket clients an additional parameter is added that allows to
disable the masking of frames that are sent by the client.
Result:
This update gives netty users the ability to create and use completely
unmasked websocket connections in addition to the normal masked channels
that the standard describes.
Motivation:
At the moment the whole HTTP header must be parsed at once which can lead to multiple parsing of the same bytes. We can do better here and allow to parse it in multiple steps.
Modifications:
- Not parse headers multiple times
- Simplify the code
- Eliminate uncessary String[] creations
- Use readSlice(...).retain() when possible.
Result:
Performance improvements as shown in the included benchmark below.
Before change:
[nmaurer@xxx]~% ./wrk-benchmark
Running 2m test @ http://xxx:8080/plaintext
16 threads and 256 connections
Thread Stats Avg Stdev Max +/- Stdev
Latency 21.55ms 15.10ms 245.02ms 90.26%
Req/Sec 196.33k 30.17k 297.29k 76.03%
373954750 requests in 2.00m, 50.15GB read
Requests/sec: 3116466.08
Transfer/sec: 427.98MB
After change:
[nmaurer@xxx]~% ./wrk-benchmark
Running 2m test @ http://xxx:8080/plaintext
16 threads and 256 connections
Thread Stats Avg Stdev Max +/- Stdev
Latency 20.91ms 36.79ms 1.26s 98.24%
Req/Sec 206.67k 21.69k 243.62k 94.96%
393071191 requests in 2.00m, 52.71GB read
Requests/sec: 3275971.50
Transfer/sec: 449.89MB
Motivation:
The 4.1.0-Beta3 implementation of HttpObjectAggregator.handleOversizedMessage closes the
connection if the client sent oversized chunked data with no Expect:
100-continue header. This causes a broken pipe or "connection reset by
peer" error in some clients (tested on Firefox 31 OS X 10.9.5,
async-http-client 1.8.14).
This part of the HTTP 1.1 spec (below) seems to say that in this scenario the connection
should not be closed (unless the intention is to be very strict about
how data should be sent).
http://www.w3.org/Protocols/rfc2616/rfc2616-sec8.html
"If an origin server receives a request that does not include an
Expect request-header field with the "100-continue" expectation,
the request includes a request body, and the server responds
with a final status code before reading the entire request body
from the transport connection, then the server SHOULD NOT close
the transport connection until it has read the entire request,
or until the client closes the connection. Otherwise, the client
might not reliably receive the response message. However, this
requirement is not be construed as preventing a server from
defending itself against denial-of-service attacks, or from
badly broken client implementations."
Modifications:
Change HttpObjectAggregator.handleOversizedMessage to close the
connection only if keep-alive is off and Expect: 100-continue is
missing. Update test to reflect the change.
Result:
Broken pipe and connection reset errors on the client are avoided when
oversized data is sent.
Related: #2983
Motivation:
It is a well known idiom to write an empty buffer and add a listener to
its future to close a channel when the last byte has been written out:
ChannelFuture f = channel.writeAndFlush(Unpooled.EMPTY_BUFFER);
f.addListener(ChannelFutureListener.CLOSE);
When HttpObjectEncoder is in the pipeline, this still works, but it
silently raises an IllegalStateException, because HttpObjectEncoder does
not allow writing a ByteBuf when it is expecting an HttpMessage.
Modifications:
- Handle an empty ByteBuf specially in HttpObjectEncoder, so that
writing an empty buffer does not fail even if the pipeline contains an
HttpObjectEncoder
- Add a test
Result:
An exception is not triggered anymore by HttpObjectEncoder, when a user
attempts to write an empty buffer.
Motivation:
Currently, when the CorsHandler processes a preflight request, or
respondes with an 403 Forbidden using the short-curcuit option, the
HttpRequest is not released which leads to a buffer leak.
Modifications:
Releasing the HttpRequest when done processing a preflight request or
responding with an 403.
Result:
Using the CorsHandler will not cause buffer leaks.
Motivation
Issue #3004 shows that "=" character was not supported as it should in
the HttpPostRequestDecoder in form-data boundary.
Modifications:
Add 2 methods in StringUtil
- split with maxPart argument: String split with max parts only (to prevent multiple '='
to be source of extra split while not needed)
- substringAfter: String part after delimiter (since first part is not
needed)
Use those methods in HttpPostRequestDecoder.
Change and the HttpPostRequestDecoderTest to check using a boundary
beginning with "=".
Results:
The fix implies more stability and fix the issue.
Related issue: #1133
Motivation:
There is no support for client socket connections via a proxy server in
Netty.
Modifications:
- Add a new module 'handler-proxy'
- Add ProxyHandler and its subclasses to support SOCKS 4a/5 and HTTP(S)
proxy connections
- Add a full parameterized test for most scenarios
- Clean up pom.xml
Result:
A user can make an outgoing connection via proxy servers with only
trivial effort.
Motivation:
There's no way for a user to get the encoder and the decoder of an
HttpClientCodec. The lack of such getter methods makes it impossible to
remove the codec handlers from the pipeline correctly.
For example, a user could add more than one HttpClientCodec to the
pipeline, and then the user cannot easily decide which encoder and
decoder to remove.
Modifications:
- Add encoder() and decoder() method to HttpClientCodec which returns
HttpRequestEncoder and HttpResponseDecoder respectively
- Also made the same changes to HttpServerCodec
Result:
A user can distinguish the handlers added by multiple HttpClientCodecs
easily.
Motivation:
Websocket clients can request to speak a specific subprotocol. The list of
subprotocols the client understands are sent to the server. The server
should select one of the protocols an reply this with the websocket
handshake response. The added code verifies that the reponded subprotocol
is valid.
Modifications:
Added verification of the subprotocol received from the server against the
subprotocol(s) that the user requests. If the user requests a subprotocol
but the server responds none or a non-requested subprotocol this is an
error and the handshake fails through an exception. If the user requests
no subprotocol but the server responds one this is also marked as an
error.
Addiontionally a getter for the WebSocketClientHandshaker in the
WebSocketClientProtocolHandler is added to enable the user of a
WebSocketClientProtocolHandler to extract the used negotiated subprotocol.
Result:
The subprotocol field which is received from a websocket server is now
properly verified on client side and clients and websocket connection
attempts will now only succeed if both parties can negotiate on a
subprotocol.
If the client sends a list of multiple possible subprotocols it can
extract the negotiated subprotocol through the added handshaker getter (WebSocketClientProtocolHandler.handshaker().actualSubprotocol()).
Motivation:
I was not fully reassured that whether everything works correctly when a websocket client receives the websocket handshake HTTP response and a websocket frame in a single ByteBuf (which can happen when the server sends a response directly or shortly after the connect). In this case some parts of the ByteBuf must be processed by HTTP decoder and the remaining by the websocket decoder.
Modification:
Adding a test that verifies that in this scenaria the handshake and the message are correctly interpreted and delivered by Netty.
Result:
One more test for Netty.
The test succeeds - No problems
Motivation:
The WebSocketClientProtocolHandshakeHandler never releases the received handshake response.
Modification:
Release the message in a finally block.
Result:
No more leak
Motivation:
The WebSocket08FrameEncoder contains an optimization path for small messages which copies the message content into the header buffer to avoid vectored writes. However this path is in the current implementation never taken because the target buffer is preallocated only for exactly the size of the header.
Modification:
For messages below a certain treshold allocate the buffer so that the message can be directly copied. Thereby the optimized path is taken.
Result:
A speedup of about 25% for 100byte messages. Declines with bigger message sizes. I have currently set the treshold to 1kB which is a point where I could still see a few percent speedup, but we should also avoid burning too many CPU cycles.
Motivation:
Websocket performance is to a large account determined through the masking
and unmasking of frames. The current behavior of this in Netty can be
improved.
Modifications:
Perform the XOR operation not bytewise but in int blocks as long as
possible. This reduces the number of necessary operations by 4. Also don't
read the writerIndex in each iteration.
Added a unit test for websocket decoding and encoding for verifiation.
Result:
A large performance gain (up to 50%) in websocket throughput.
Motivation:
According to the websocket specification peers may send a close frame when
they detect a protocol violation (with status code 1002). The current
implementation simply closes the connection. This update should add this
functionality. The functionality is optional - but it might help other
implementations with debugging when they receive such a frame.
Modification:
When a protocol violation in the decoder is detected and a close was not
already initiated by the remote peer a close frame is
sent.
Result:
Remotes which will send an invalid frame will now get a close frame that
indicates the protocol violation instead of only seeing a closed
connection.
Motivation:
Sometimes it is useful to be able to access the uri that was used to initialize the QueryStringDecoder.
Modifications:
Add method which allows to retrieve the uri.
Result:
Allow to retrieve the uri that was used to create the QueryStringDecoder.
Motiviation:
The HTTP content decoder's cleanup method is not cleaning up the decoder correctly.
The cleanup method is currently doing a readOutbound on the EmbeddedChannel but
for decoding the call should be readInbound.
Modifications:
-Change readOutbound to readInbound in the cleanup method
Result:
The cleanup method should be correctly releaseing unused resources
Motivation:
Currently we do more memory copies then needed.
Modification:
- Directly use heap buffers to reduce memory copy
- Correctly release buffers to fix buffer leak
Result:
Less memory copies and no leaks
Related issue: #2741 and #2151
Motivation:
There is no way for ChunkedWriteHandler to know the progress of the
transfer of a ChannelInput. Therefore, ChannelProgressiveFutureListener
cannot get exact information about the progress of the transfer.
If you add a few methods that optionally provides the transfer progress
to ChannelInput, it becomes possible for ChunkedWriteHandler to notify
ChannelProgressiveFutureListeners.
If the input has no definite length, we can still use the progress so
far, and consider the length of the input as 'undefined'.
Modifications:
- Add ChunkedInput.progress() and ChunkedInput.length()
- Modify ChunkedWriteHandler to use progress() and length() to notify
the transfer progress
Result:
ChunkedWriteHandler now notifies ChannelProgressiveFutureListener.
Motivation:
The _0XFF_0X00 buffer is not duplicated and empty after the first usage preventing the connection close to happen on subsequent close frames.
Modifications:
Correctly duplicate the buffer.
Result:
Multiple CloseWebSocketFrames are handled correctly.
In Netty 3, downstream writes of SPDY data frames and upstream reads of
SPDY window udpate frames occur on different threads.
When receiving a window update frame, we synchronize on a java object
(SpdySessionHandler::flowControlLock) while sending any pending writes
that are now able to complete.
When writing a data frame, we check the send window size to see if we
are allowed to write it to the socket, or if we have to enqueue it as a
pending write. To prevent races with the window update frame, this is
also synchronized on the same SpdySessionHandler::flowControlLock.
In Netty 4, upstream and downstream operations on any given channel now
occur on the same thread. Since java locks are re-entrant, this now
allows downstream writes to occur while processing window update frames.
In particular, when we receive a window update frame that unblocks a
pending write, this write completes which triggers an event notification
on the response, which in turn triggers a write of a data frame. Since
this is on the same thread it re-enters the lock and modifies the send
window. When the write completes, we continue processing pending writes
without knowledge that the window size has been decremented.
Related issue: #2743
Motivation:
When there are more than one stream with the same priority, the set
returned by SpdySession.getActiveStream() will not include all of them,
because it uses TreeSet and only compares the priority of streams. If
two different streams have the same priority, one of them will be
discarded by TreeSet.
Modification:
- Rename getActiveStreams() to activeStreams()
- Replace PriorityComparator with StreamComparator
Result:
Two different streams with the same priority are compared correctly.
Motivation:
If the requests contains uri parameters but not path the HttpRequestEncoder does produce an invalid uri while try to add the missing path.
Modifications:
Correctly handle the case of uri with paramaters but no path.
Result:
HttpRequestEncoder produce correct uri in all cases.
Motivation:
Now Netty has a few problems with null values.
Modifications:
- Check HAProxyProxiedProtocol in HAProxyMessage constructor and throw NPE if it is null.
If HAProxyProxiedProtocol is null we will set AddressFamily as null. So we will get NPE inside checkAddress(String, AddressFamily) and it won't be easy to understand why addrFamily is null.
- Check File in DiskFileUpload.toString().
If File is null we will get NPE when calling toString() method.
- Check Result<String> in MqttDecoder.decodeConnectionPayload(...).
If !mqttConnectVariableHeader.isWillFlag() || !mqttConnectVariableHeader.hasUserName() || !mqttConnectVariableHeader.hasPassword() we will get NPE when we will try to create new instance of MqttConnectPayload.
- Check Unsafe before calling unsafe.getClass() in PlatformDependent0 static block.
- Removed unnecessary null check in WebSocket08FrameEncoder.encode(...).
Because msg.content() can not return null.
- Removed unnecessary null check in DefaultStompFrame(StompCommand) constructor.
Because we have this check in the super class.
- Removed unnecessary null checks in ConcurrentHashMapV8.removeTreeNode(TreeNode<K,V>).
- Removed unnecessary null check in OioDatagramChannel.doReadMessages(List<Object>).
Because tmpPacket.getSocketAddress() always returns new SocketAddress instance.
- Removed unnecessary null check in OioServerSocketChannel.doReadMessages(List<Object>).
Because socket.accept() always returns new Socket instance.
- Pass Unpooled.buffer(0) instead of null inside CloseWebSocketFrame(boolean, int) constructor.
If we will pass null we will get NPE in super class constructor.
- Added throw new IllegalStateException in GlobalEventExecutor.awaitInactivity(long, TimeUnit) if it will be called before GlobalEventExecutor.execute(Runnable).
Because now we will get NPE. IllegalStateException will be better in this case.
- Fixed null check in OpenSslServerContext.setTicketKeys(byte[]).
Now we throw new NPE if byte[] is not null.
Result:
Added new null checks when it is necessary, removed unnecessary null checks and fixed some NPE problems.
Modifications:
- Added a static modifier for CompositeByteBuf.Component.
This class is an inner class, but does not use its embedded reference to the object which created it. This reference makes the instances of the class larger, and may keep the reference to the creator object alive longer than necessary.
- Removed unnecessary boxing/unboxing operations in HttpResponseDecoder, RtspResponseDecoder, PerMessageDeflateClientExtensionHandshaker and PerMessageDeflateServerExtensionHandshaker
A boxed primitive is created from a String, just to extract the unboxed primitive value.
- Removed unnecessary 3 times calculations in DiskAttribute.addContent(...).
- Removed unnecessary checks if file exists before call mkdirs() in NativeLibraryLoader and PlatformDependent.
Because the method mkdirs() has this check inside.
- Removed unnecessary `instanceof AsciiString` check in StompSubframeAggregator.contentLength(StompHeadersSubframe) and StompSubframeDecoder.getContentLength(StompHeaders, long).
Because StompHeaders.get(CharSequence) always returns java.lang.String.
Motivation:
When we receive an incomplete WebSocketFrame we need to make sure to wait for more data. Because we not did this we could produce a NPE.
Modification:
Make sure we not try to add null into the RecyclableArrayList
Result:
no more NPE on incomplete frames.
Motivation:
HTTP header validation can be expensive so we should allow to disable it like we do in HttpObjectDecoder.
Modification:
Add constructor argument to disable validation.
Result:
Performance improvement
Motivation:
HttpObjectAggregator currently creates a new FullHttpResponse / FullHttpRequest for each message it needs to aggregate. While doing so it also creates 2 DefaultHttpHeader instances (one for the headers and one for the trailing headers). This is bad for two reasons:
- More objects are created then needed and also populate the headers is not for free
- Headers may get validated even if the validation was disabled in the decoder
Modification:
- Wrap the previous created HttpResponse / HttpRequest and so reuse the original HttpHeaders
- Reuse the previous created trailing HttpHeader.
- Fix a bug where the trailing HttpHeader was incorrectly mixed in the headers.
Result:
- Less GC
- Faster HttpObjectAggregator implementation
Motivation:
HttpOrSpdyChooser can be simplified so the user not need to implement getProtocol(...) method.
Modification:
Add implementation for the method. The user can override it if necessary.
Result:
Easier usage of HttpOrSpdyChooser.
Motivation:
DecodeResult is dropped when aggregate HTTP messages.
Modification:
Make sure we not drop the DecodeResult while aggregate HTTP messages.
Result:
Correctly include the DecodeResult for later processing.
Motivation:
Due to integer overflow bug, writes of FileRegions to http server pipeline (eg like one from HttpStaticFileServer example) with length greater than Integer.MAX_VALUE are ignored in 1/2 of cases (ie no data gets sent to client)
Modification:
Correctly handle chunk sized > Integer.MAX_VALUE
Result:
Be able to use FileRegion > Integer.MAX_VALUE when using chunked encoding.
Motivation:
Persuit for the consistency in method naming
Modifications:
- Remove the 'get' prefix from all HTTP/SPDY message classes
- Fix some inspector warnings
Result:
Consistency
Motivation:
When Netty runs in a managed environment such as web application server,
Netty needs to provide an explicit way to remove the thread-local
variables it created to prevent class loader leaks.
FastThreadLocal uses different execution paths for storing a
thread-local variable depending on the type of the current thread.
It increases the complexity of thread-local removal.
Modifications:
- Moved FastThreadLocal and FastThreadLocalThread out of the internal
package so that a user can use it.
- FastThreadLocal now keeps track of all thread local variables it has
initialized, and calling FastThreadLocal.removeAll() will remove all
thread-local variables of the caller thread.
- Added FastThreadLocal.size() for diagnostics and tests
- Introduce InternalThreadLocalMap which is a mixture of hard-wired
thread local variable fields and extensible indexed variables
- FastThreadLocal now uses InternalThreadLocalMap to implement a
thread-local variable.
- Added ThreadDeathWatcher.unwatch() so that PooledByteBufAllocator
tells it to stop watching when its thread-local cache has been freed
by FastThreadLocal.removeAll().
- Added FastThreadLocalTest to ensure that removeAll() works
- Added microbenchmark for FastThreadLocal and JDK ThreadLocal
- Upgraded to JMH 0.9
Result:
- A user can remove all thread-local variables Netty created, as long as
he or she did not exit from the current thread. (Note that there's no
way to remove a thread-local variable from outside of the thread.)
- FastThreadLocal exposes more useful operations such as isSet() because
we always implement a thread local variable via InternalThreadLocalMap
instead of falling back to JDK ThreadLocal.
- FastThreadLocalBenchmark shows that this change improves the
performance of FastThreadLocal even more.
Motivation:
We have quite a bit of code duplication between HTTP/1, HTTP/2, SPDY,
and STOMP codec, because they all have a notion of 'headers', which is a
multimap of string names and values.
Modifications:
- Add TextHeaders and its default implementation
- Add AsciiString to replace HttpHeaderEntity
- Borrowed some portion from Apache Harmony's java.lang.String.
- Reimplement HttpHeaders, SpdyHeaders, and StompHeaders using
TextHeaders
- Add AsciiHeadersEncoder to reuse the encoding a TextHeaders
- Used a dedicated encoder for HTTP headers for better performance
though
- Remove shortcut methods in SpdyHeaders
- Replace SpdyHeaders.getStatus() with HttpResponseStatus.parseLine()
Result:
- Removed quite a bit of code duplication in the header implementations.
- Slightly better performance thanks to improved header validation and
hash code calculation
Motivation:
Provide a faster ThreadLocal implementation
Modification:
Add a "FastThreadLocal" which uses an EnumMap and a predefined fixed set of possible thread locals (all of the static instances created by netty) that is around 10-20% faster than standard ThreadLocal in my benchmarks (and can be seen having an effect in the direct PooledByteBufAllocator benchmark that uses the DEFAULT ByteBufAllocator which uses this FastThreadLocal, as opposed to normal instantiations that do not, and in the new RecyclableArrayList benchmark);
Result:
Improved performance
Motivation:
According to RFC2616 section 19, boundary string could be quoted, but
currently the PostRequestDecoder does not support it while it should.
Modifications:
Once the boundary is found, one check is made to verify if the boundary
is "quoted", and if so, it is "unqoted".
Note: in following usage of this boundary (as delimiter), quote seems no
more allowed according to the same RFC, so the reason that only the
boundary definition is corrected.
Result:
Now the boundary could be whatever quoted or not. A Junit test case
checks it.
Motivation:
When an attribute is ending with an odd number of CR (0x0D), the decoder
add an extra CR in the decoded attribute and should not.
Modifications:
Each time a CR is detected, the next byte was tested to be LF or not. If
not, in a number of places, the CR byte was lost while it should not be.
When a CR is detected, if the next byte is not LF, the CR byte should be
saved as the position point to the next byte (not LF). When a CR is
detected, if there is not yet other available bytes, the position is
reset to the position of CR (since a LF could follow).
A new Junit test case is added, using DECODER and variable number of CR
in the final attribute (testMultipartCodecWithCRasEndOfAttribute).
Result:
The attribute is now correctly decoded with the right number of CR
ending bytes.
Motivation:
We have different message aggregator implementations for different
protocols, but they are very similar with each other. They all stems
from HttpObjectAggregator. If we provide an abstract class that provide
generic message aggregation functionality, we will remove their code
duplication.
Modifications:
- Add MessageAggregator which provides generic message aggregation
- Reimplement all existing aggregators using MessageAggregator
- Add DecoderResultProvider interface and extend it wherever possible so
that MessageAggregator respects the state of the decoded message
Result:
Less code duplication
Motivation:
CORS request are currently processed, and potentially failed, after the
target ChannelHandler(s) have been invoked. This might not be desired, for
example a HTTP PUT or POST might have been performed.
Modifications:
Added a shortCurcuit option to CorsConfig which when set will
cause a validation of the HTTP request's 'Origin' header and verify that
it is valid according to the configuration. If found invalid an 403
"Forbidden" response will be returned and not further processing will
take place.
This is indeed no help for non browser request, like using curl, which
can set the 'Origin' header.
Result:
Users can now configure if the 'Origin' header should be validated
upfront and have the request rejected before any further processing
takes place.
Motivation:
Because of not correctly release a buffer before null out the reference a memory leak shows up.
Modifications:
Correct call buffer.release() before null out reference.
Result:
No more leak
Motivation:
Currently there's no way to configure maxFramePayloadSize from
WebSocketServerProtocolHandler, which is the most used entry point of
WebSocket server.
Modifications:
Added another constructor for maxFramePayloadSize.
Result:
We can configure max frame size for websocket packet in
WebSocketServerProtocolHandler. It will also keep backward compatibility
with default max size: 65536. (65536 is hard-coded max size in previous
version of Netty)
Motivation:
Before we aggregated the full text in the WebSocket08FrameDecoder just to fill in the ContinuationWebSocketFrame.aggregatedText(). The problem was that there was no upper-limit and so it would be possible to see an OOME if the remote peer sends a TextWebSocketFrame + a never ending stream of ContinuationWebSocketFrames. Furthermore the aggregation does not really belong in the WebSocket08FrameDecoder, as we provide an extra ChannelHandler for this anyway (WebSocketFrameAggregator).
Modification:
Remove the ContinuationWebSocketFrame.aggregatedText() method and corresponding constructor. Also refactored WebSocket08FrameDecoder a bit to me more efficient which is now possible as we not need to aggregate here.
Result:
No more risk of OOME because of frames.
Motivation:
When CORS has been configured to allow "*" origin, and at the same time
is allowing credentials/cookies, this causes an error from the browser
because when the response 'Access-Control-Allow-Credentials' header
is true, the 'Access-Control-Allow-Origin' must be an actual origin.
Modifications:
Changed CorsHandler setOrigin method to check for the combination of "*"
origin and allowCredentials, and if the check matches echo the CORS
request's 'Origin' value.
Result:
This addition enables the echoing of the request 'Origin' value as the
'Access-Control-Allow-Origin' value when the server has been configured
to allow any origin in combination with allowCredentials.
This allows client requests to succeed when expecting the server to
be able to handle "*" origin and at the same time be able to send cookies
by setting 'xhr.withCredentials=true'. A concrete example of this is
the SockJS protocol which expects behaviour.
Motivation:
4 and 5 were diverged long time ago and we recently reverted some of the
early commits in master. We must make sure 4.1 and master are not very
different now.
Modification:
Fix found differences
Result:
4.1 and master got closer.
Motivation:
4 and 5 were diverged long time ago and we recently reverted some of the
early commits in master. We must make sure 4.1 and master are not very
different now.
Modification:
Fix found differences
Result:
4.1 and master got closer.
Motivation:
Make it more clear what the output of HttpObjectAggregator is and that it need to come after the encoder in the pipeline.
Modifications:
Change javadocs to make things more clear.
Result:
Better docs
Motivation:
Fix leaks reported during running SpdyFrameDecoderTest
Modifications:
Make sure the produced buffers of SpdyFrameDecoder and SpdyFrameDecoderTest are released
Result:
No more leak reports during run the tests.
Motivation:
Fix leaks reported during running SpdyFrameDecoderTest
Modifications:
Make sure the produced buffer of SpdyFrameDecoder is released
Result:
No more leak reports during run the tests.
Motivation:
Fix leaks reported during SPDY test.
Modifications:
Use ReferenceCountUtil.releaseLater(...) to make sure everything is released once the tests are done.
Result:
No more leak reports during run the tests.
Motivation:
Currently, the SPDY frame encoding and decoding code is based upon
the ChannelHandler abstraction. This requires maintaining multiple
versions for 3.x and 4.x (and possibly 5.x moving forward).
Modifications:
The SPDY frame encoding and decoding code is separated from the
ChannelHandler and SpdyFrame abstractions. Also test coverage is
improved.
Result:
SpdyFrameCodec now implements the ChannelHandler abstraction and is
responsible for creating and handling SpdyFrame objects.
Motivation:
Currently the CORS support only handles a single origin, or a wildcard
origin. This task should enhance Netty's CORS support to allow multiple
origins to be specified. Just being allowed to specify one origin is
particulary limiting when a site support both http and https for
example.
Modifications:
- Updated CorsConfig and its Builder to accept multiple origins.
Result:
Users are now able to configure multiple origins for CORS.
[https://github.com/netty/netty/issues/2346]
Motivation:
Previously, we used URLDecoder.decode(...) to decode url-encoded data. This generates a lot of garbage and takes a considerable amount of time.
Modifications:
Replace URLDecoder.decode(...) with QueryStringDecoder.decodeComponent(...)
Result:
Less garbage to GC and faster decode processing.
Motivation:
When running the build with Java 8 the following error occurred:
java: reference to preflightResponseHeader is ambiguous
both method
<T>preflightResponseHeader(java.lang.CharSequence,java.lang.Iterable<T>)
in io.netty.handler.codec.http.cors.CorsConfig.Builder and method
<T>preflightResponseHeader(java.lang.String,java.util.concurrent.Callable<T>)
in io.netty.handler.codec.http.cors.CorsConfig.Builder match
The offending class was CorsConfigTest and its shouldThrowIfValueIsNull
which contained the following line:
withOrigin("*").preflightResponseHeader("HeaderName", null).build();
Modifications:
Updated the offending method with to supply a type, and object array, to
avoid the error.
Result:
After this I was able to build with Java 7 and Java 8
Motivation:
An intermediary like a load balancer might require that a Cross Origin
Resource Sharing (CORS) preflight request have certain headers set.
As a concrete example the Elastic Load Balancer (ELB) requires the
'Date' and 'Content-Length' header to be set or it will fail with a 502
error code.
This works is an enhancement of https://github.com/netty/netty/pull/2290
Modifications:
CorsConfig has been extended to make additional HTTP response headers
configurable for preflight responses. Since some headers, like the
'Date' header need to be generated each time, m0wfo suggested using a
Callable.
Result:
By default, the 'Date' and 'Content-Lenght' headers will be sent in a
preflight response. This can be overriden and users can specify
any headers that might be required by different intermediaries.
Motivation:
If the last item analyzed in a previous received HttpChunk/HttpContent was a part of an attribute's name, the read index was not set to the new right place and therefore raizing an exception in some case (since the "new" name analyzed is empty, which is not allowed so the exception).
What appears there is that the read index should be reset to the last valid position encountered whatever the case. Currently it was set when only when there is an attribute not already finished (name is ok, but content is possibly not).
Therefore the issue is that elements could be rescanned multiple times (including completed elements) and moreover some bad decoding can occur such as when in a middle of an attribute's name.
Modifications:
To fix this issue, since "firstpos" contains the last "valid" read index of the decoding (when finding a '&', '=', 'CR/LF'), we should add the setting of the read index for the following cases:
'lastchunk' encountered, therefore finishing the current buffer
any other cases than current attribute is not finished (name not found yet in particular)
So adding for this 2 cases:
undecodedChunk.readerIndex(firstpos);
Result:
Now the decoding is done once, content is added from chunk/content to chunk/content, name is decoded correctly even if in the middle of 2 chunks/contents.
A Junit test code was added: testChunkCorrect that should not raized any exception.
Motivation:
When an HttpResponseDecoder decodes an invalid chunk, a LastHttpContent instance is produced and the decoder enters the 'BAD_MESSAGE' state, which is not supposed to produce a message any further. However, because HttpObjectDecoder.invalidChunk() did not clear this.message out to null, decodeLast() will produce another LastHttpContent message on a certain situation.
Modification:
Do not forget to null out HttpObjectDecoder.message in invalidChunk(), and add a test case for it.
Result:
No more consecutive LastHttpContent messages produced by HttpObjectDecoder.
Motivation:
Currently, it is impossible to give a user the full control over what to do in response to the request with 'Expect: 100-continue' header. Currently, a user have to do one of the following:
- Accept the request and respond with 100 Continue, or
- Send the reject response and close the connection.
.. which means it is impossible to send the reject response and keep the connection alive so that the client sends additional requests.
Modification:
Added a public method called 'reset()' to HttpObjectDecoder so that a user can reset the state of the decoder easily. Once called, the decoder will assume the next input will be the beginning of a new request.
HttpObjectAggregator now calls `reset()`right after calling 'handleOversizedMessage()' so that the decoder can continue to decode the subsequent request even after the request with 'Expect: 100-continue' header is rejected.
Added relevant unit tests / Minor clean-up
Result:
This commit completes the fix of #2211
- Related: #2163
- Add ResourceLeakHint to allow a user to provide a meaningful information about the leak when touching it
- DefaultChannelHandlerContext now implements ResourceLeakHint to tell where the message is going.
- Cleaner resource leak report by excluding noisy stack trace elements
- Related issues: #1937#1938 and #1946
- Add InterfaceHttpPostRequestDecoder and Make HttpPostRequestDecoder implement it
- HttpPostRequestDecoder actually delegates itself to HttpPostStandardRequestDecoder or HttpPostMultipartRequestDecoder
- Remove IncompatibleDataDecoderException because it's not thrown anywhere now
NPN server providers return a String version of the negotiated protocol
and the getProtocolByName method allows to easily get an instance of
the SelectedProtocol enum and avoid the need for a switch statement in
each subclass to match the String against the enum value.
- Since Netty 4, HTTP decoder does not generate a full message at all. Therefore, there's no need to keep separate states for the content smaller than maxChunkSize.
- maxChunkSize must be greater than 0. Setting it to 0 should not disable chunked encoding. We have a dedicated flag for that.
- Uncommented the tests that were commented out for an unknown reason, with some fixes.
- Added more tests for HTTP decoder.
- Removed the Ignore annotation on some tests.
- Fixes#2003 properly
- Instead of using 'bundle' packaging, use 'jar' packaging. This is
more robust because some strict build tools fail to retrieve the
artifacts from a Maven repository unless their packaging is not 'jar'.
- All artifacts now contain META-INF/io.netty.version.properties, which
provides the detailed information about the build and repository.
- Removed OSGi testsuite temporarily because it gives false errors
during split package test and examination.
- Add io.netty.util.Version for easy retrieval of version information
- This commit allows a user to write its first web socket frame right after calling WebSocketServerHandshaker.handshake() rather than adding a listener to the future it returns.
- Should fix#1933
encode of chunked content is not the most common pattern so moving it to an extra method makes it possible to inline the rest as it is a smaller method now.
* Minimize allocation of StringBuilder and also minimize char array copy
* Try to detect HttpVersion without calling toUpperCase() for performance reasons
- write() now accepts a ChannelPromise and returns ChannelFuture as most
users expected. It makes the user's life much easier because it is
now much easier to get notified when a specific message has been
written.
- flush() does not create a ChannelPromise nor returns ChannelFuture.
It is now similar to what read() looks like.
DefaultChannelHandlerContext does not trigger exceptionCaught() immediately when ChannelOutboundHandler.write() raises an exception. It just records the exception until flush() is triggered. On invokeFlush(), if there's any exception recorded, DefaultChannelHandlerContext will fail the promise without calling ChannelOutboundHandler.flush(). If more than one exception were raised, only the first exception is used as the cause of the failure and the others will be logged at warn level.
- Remove channelReadSuspended because it's actually same with messageReceivedLast
- Rename messageReceived to channelRead
- Rename messageReceivedLast to channelReadComplete
We renamed messageReceivedLast to channelReadComplete because it
reflects what it really is for. Also, we renamed messageReceived to
channelRead for consistency in method names.
I must admit MesageList was pain in the ass. Instead of forcing a
handler always loop over the list of messages, this commit splits
messageReceived(ctx, list) into two event handlers:
- messageReceived(ctx, msg)
- mmessageReceivedLast(ctx)
When Netty reads one or more messages, messageReceived(ctx, msg) event
is triggered for each message. Once the current read operation is
finished, messageReceivedLast() is triggered to tell the handler that
the last messageReceived() was the last message in the current batch.
Similarly, for outbound, write(ctx, list) has been split into two:
- write(ctx, msg)
- flush(ctx, promise)
Instead of writing a list of message with a promise, a user is now
supposed to call write(msg) multiple times and then call flush() to
actually flush the buffered messages.
Please note that write() doesn't have a promise with it. You must call
flush() to get notified on completion. (or you can use writeAndFlush())
Other changes:
- Because MessageList is completely hidden, codec framework uses
List<Object> instead of MessageList as an output parameter.
- SimpleChannelInboundHandler now has a constructor parameter to let a
user decide to enable automatic message release. (the default is to
enable), which makes ChannelInboundConsumingHandler of less value.
* This fix the bug which caused an UnsupportedOperationException when renameTo(...) was called and the underlying ByteBuf was backed by multiple ByteBuffers
The API changes made so far turned out to increase the memory footprint
and consumption while our intention was actually decreasing them.
Memory consumption issue:
When there are many connections which does not exchange data frequently,
the old Netty 4 API spent a lot more memory than 3 because it always
allocates per-handler buffer for each connection unless otherwise
explicitly stated by a user. In a usual real world load, a client
doesn't always send requests without pausing, so the idea of having a
buffer whose life cycle if bound to the life cycle of a connection
didn't work as expected.
Memory footprint issue:
The old Netty 4 API decreased overall memory footprint by a great deal
in many cases. It was mainly because the old Netty 4 API did not
allocate a new buffer and event object for each read. Instead, it
created a new buffer for each handler in a pipeline. This works pretty
well as long as the number of handlers in a pipeline is only a few.
However, for a highly modular application with many handlers which
handles connections which lasts for relatively short period, it actually
makes the memory footprint issue much worse.
Changes:
All in all, this is about retaining all the good changes we made in 4 so
far such as better thread model and going back to the way how we dealt
with message events in 3.
To fix the memory consumption/footprint issue mentioned above, we made a
hard decision to break the backward compatibility again with the
following changes:
- Remove MessageBuf
- Merge Buf into ByteBuf
- Merge ChannelInboundByte/MessageHandler and ChannelStateHandler into ChannelInboundHandler
- Similar changes were made to the adapter classes
- Merge ChannelOutboundByte/MessageHandler and ChannelOperationHandler into ChannelOutboundHandler
- Similar changes were made to the adapter classes
- Introduce MessageList which is similar to `MessageEvent` in Netty 3
- Replace inboundBufferUpdated(ctx) with messageReceived(ctx, MessageList)
- Replace flush(ctx, promise) with write(ctx, MessageList, promise)
- Remove ByteToByteEncoder/Decoder/Codec
- Replaced by MessageToByteEncoder<ByteBuf>, ByteToMessageDecoder<ByteBuf>, and ByteMessageCodec<ByteBuf>
- Merge EmbeddedByteChannel and EmbeddedMessageChannel into EmbeddedChannel
- Add SimpleChannelInboundHandler which is sometimes more useful than
ChannelInboundHandlerAdapter
- Bring back Channel.isWritable() from Netty 3
- Add ChannelInboundHandler.channelWritabilityChanges() event
- Add RecvByteBufAllocator configuration property
- Similar to ReceiveBufferSizePredictor in Netty 3
- Some existing configuration properties such as
DatagramChannelConfig.receivePacketSize is gone now.
- Remove suspend/resumeIntermediaryDeallocation() in ByteBuf
This change would have been impossible without @normanmaurer's help. He
fixed, ported, and improved many parts of the changes.
- Fixes#1282 (not perfectly, but to the extent it's possible with the current API)
- Add AddressedEnvelope and DefaultAddressedEnvelope
- Make DatagramPacket extend DefaultAddressedEnvelope<ByteBuf, InetSocketAddress>
- Rename ByteBufHolder.data() to content() so that a message can implement both AddressedEnvelope and ByteBufHolder (DatagramPacket does) without introducing two getter methods for the content
- Datagram channel implementations now understand ByteBuf and ByteBufHolder as a message with unspecified remote address.
- Fixes#1308
freeInboundBuffer() and freeOutboundBuffer() were introduced in the early days of the new API when we did not have reference counting mechanism in the buffer. A user did not want Netty to free the handler buffers had to override these methods.
However, now that we have reference counting mechanism built into the buffer, a user who wants to retain the buffers beyond handler's life cycle can simply return the buffer whose reference count is greater than 1 in newInbound/OutboundBuffer().
This change also introduce a few other changes which was needed:
* ChannelHandler.beforeAdd(...) and ChannelHandler.beforeRemove(...) were removed
* ChannelHandler.afterAdd(...) -> handlerAdded(...)
* ChannelHandler.afterRemoved(...) -> handlerRemoved(...)
* SslHandler.handshake() -> SslHandler.hanshakeFuture() as the handshake is triggered automatically after
the Channel becomes active
- Use state machine to simplify the code
- Always produce a chunked response for simplicity
- Change the signature of beginEncode() - HttpContent was simply unnecessary.
- Add more test cases
- Fixes#1280
- Add 'Content-Length' and remove 'Transfer-Encoding' in case of FullHttpMessage
- Remove 'Content-Length' and add 'Transfer-Encoding: chunked' in case of non-full HttpMessage
- Fixes#1275
- Fixes#1229
- Primarily written by @normanmaurer and revised by @trustin
This commit removes the notion of unfolding from the codec framework
completely. Unfolding was introduced in Netty 3.x to work around the
shortcoming of the codec framework where encode() and decode() did not
allow generating multiple messages.
Such a shortcoming can be fixed by changing the signature of encode()
and decode() instead of introducing an obscure workaround like
unfolding. Therefore, we changed the signature of them in 4.0.
The change is simple, but backward-incompatible. encode() and decode()
do not return anything. Instead, the codec framework will pass a
MessageBuf<Object> so encode() and decode() can add the generated
messages into the MessageBuf.
- Add ChannelHandlerUtil and move the core logic of ChannelInbound/OutboundMessageHandler to ChannelHandlerUtil
- Add ChannelHandlerUtil.SingleInbound/OutboundMessageHandler and make ChannelInbound/OutboundMessageHandlerAdapter implement them. This is a backward incompatible change because it forces all handler methods to be public (was protected previously)
- Fixes: #1119
- Rename ChannelHandlerAdapter to ChannelDuplexHandler
- Add ChannelHandlerAdapter that implements only ChannelHandler
- Rename CombinedChannelHandler to CombinedChannelDuplexHandler and
improve runtime validation
- Remove ChannelInbound/OutboundHandlerAdapter which are not useful
- Make ChannelOutboundByteHandlerAdapter similar to
ChannelInboundByteHandlerAdapter
- Make the tail and head handler of DefaultChannelPipeline accept both
bytes and messages. ChannelHandlerContext.hasNext*() were removed
because they always return true now.
- Removed various unnecessary null checks.
- Correct method/field names:
inboundBufferSuspended -> channelReadSuspended
- Move common methods from ByteBuf to Buf
- Rename ensureWritableBytes() to ensureWritable()
- Rename readable() to isReadable()
- Rename writable() to isWritable()
- Add isReadable(int) and isWritable(int)
- Add AbstractMessageBuf
- Rewrite DefaultMessageBuf and QueueBackedMessageBuf
- based on Josh Bloch's public domain ArrayDeque impl
* This is done because we noticed that the previous change limit the usage more then it gave us any benefit. Now it is possible
again to rewrite the url on the fly or reuse the objects when writing a proxy and so limit the GC pressure.
* Fixes also #979
This changes the behavior of the ChannelPipeline.remove(..) and ChannelPipeline.replace(..) methods in that way
that after invocation it is not possible anymore to access any data in the inbound or outbound buffer. This is
because it empty it now to prevent side-effects. If a user want to preserve the content and forward it to the
next handler in the pipeline it is adviced to use one of the new methods which where introduced.
- ChannelPipeline.removeAndForward(..)
- ChannelPipeline.replaceAndForward(..)
- Borrow SLF4J API which is the best of the best
- InternalLoggerFactory now automatically detects the logging framework
using static class loading. It tries SLF4J, Log4J, and then falls back
to java.util.logging.
- Remove OsgiLogger because it is very likely that OSGi container
already provides a bridge for existing logging frameworks
- Remove JBossLogger because the latest JBossLogger implementation seems
to implement SLF4J binding
- Upgrade SLF4J to 1.7.2
- Remove tests for the untestable logging frameworks
- Remove TestAny
- Rename message types for clarity
- HttpMessage -> FullHttpMessage
- HttpHeader -> HttpMessage
- HttpRequest -> FullHttpRequest
- HttpResponse -> FulllHttpResponse
- HttpRequestHeader -> HttpRequest
- HttpResponseHeader -> HttpResponse
- HttpContent now extends ByteBufHolder; no more content() method
- Make HttpHeaders abstract, make its header access methods public, and
add DefaultHttpHeaders
- Header accessor methods in HttpMessage and LastHttpContent are
replaced with HttpMessage.headers() and
LastHttpContent.trailingHeaders(). Both methods return HttpHeaders.
- Remove setters wherever possible and remove 'get' prefix
- Instead of calling setContent(), a user can either specify the content
when constructing a message or write content into the buffer.
(e.g. m.content().writeBytes(...))
- Overall cleanup & fixes
This commit tries to simplify the handling of Http easier and more consistent. This has a effect of many channges. Including:
- HttpMessage was renamed to HttpHeader and the setContent and getContent methods were removed
- HttpChunk was renamed to HttpContent
- HttpChunkTrailer was renamed to LastHttpContent
- HttpCodecUtil was merged into HttpHeaders
Now a "complete" Http message (request or response) contains of the following parts:
- HttpHeader (HttpRequestHeader or HttpResponseHeader)
- 0 - n HttpContent objects which contains parts of the content of the message
- 1 LastHttpContent which marks the end of the message and contains the remaining data of the content
I also changed the sematic of HttpResponse and HttpRequest, these now represent a "complete" message which contains the HttpHeader and the HttpLastContent, and so can be used to eeasily send requests. The HttpMessageAggregator was renamed to HttpObjectAggregator and produce HttpResponse / HttpRequest message.
This pull request adds two new handler methods: discardInboundReadBytes(ctx) and discardOutboundReadBytes(ctx) to ChannelInboundByteHandler and ChannelOutboundByteHandler respectively. They are called between every inboundBufferUpdated() and flush() respectively. Their default implementation is to call discardSomeReadBytes() on their buffers and a user can override this behavior easily. For example, ReplayingDecoder.discardInboundReadBytes() looks like the following:
@Override
public void discardInboundReadBytes(ChannelHandlerContext ctx) throws Exception {
ByteBuf in = ctx.inboundByteBuffer();
final int oldReaderIndex = in.readerIndex();
super.discardInboundReadBytes(ctx);
final int newReaderIndex = in.readerIndex();
checkpoint -= oldReaderIndex - newReaderIndex;
}
If a handler, which has its own buffer index variable, extends ReplayingDecoder or ByteToMessageDecoder, the handler can also override discardInboundReadBytes() and adjust its index variable accordingly.
- Also fixed a incorrect port of SpdySessionHandler
- Previously, it closed the connection too early when sending a GOAWAY frame
- After this fix, SpdySessionHandlerTest now passes again without the previous fix
- Fixes#831
This commit ensures the following events are never triggered as a direct
invocation if they are triggered via ChannelPipeline.fire*():
- channelInactive
- channelUnregistered
- exceptionCaught
This commit also fixes the following issues surfaced by this fix:
- Embedded channel implementations run scheduled tasks too early
- SpdySessionHandlerTest tries to generate inbound data even after the
channel is closed.
- AioSocketChannel enters into an infinite loop on I/O error.
This commit introduces a new API for ByteBuf allocation which fixes
issue #643 along with refactoring of ByteBuf for simplicity and better
performance. (see #62)
A user can configure the ByteBufAllocator of a Channel via
ChannelOption.ALLOCATOR or ChannelConfig.get/setAllocator(). The
default allocator is currently UnpooledByteBufAllocator.HEAP_BY_DEFAULT.
To allocate a buffer, do not use Unpooled anymore. do the following:
ctx.alloc().buffer(...); // allocator chooses the buffer type.
ctx.alloc().heapBuffer(...);
ctx.alloc().directBuffer(...);
To deallocate a buffer, use the unsafe free() operation:
((UnsafeByteBuf) buf).free();
The following is the list of the relevant changes:
- Add ChannelInboundHandler.freeInboundBuffer() and
ChannelOutboundHandler.freeOutboundBuffer() to let a user free the
buffer he or she allocated. ChannelHandler adapter classes implement
is already, so most users won't need to call free() by themselves.
freeIn/OutboundBuffer() methods are invoked when a Channel is closed
and deregistered.
- All ByteBuf by contract must implement UnsafeByteBuf. To access an
unsafe operation: ((UnsafeByteBuf) buf).internalNioBuffer()
- Replace WrappedByteBuf and ByteBuf.Unsafe with UnsafeByteBuf to
simplify overall class hierarchy and to avoid unnecesary instantiation
of Unsafe instances on an unsafe operation.
- Remove buffer reference counting which is confusing
- Instantiate SwappedByteBuf lazily to avoid instantiation cost
- Rename ChannelFutureFactory to ChannelPropertyAccess and move common
methods between Channel and ChannelHandlerContext there. Also made it
package-private to hide it from a user.
- Remove unused unsafe operations such as newBuffer()
- Add DetectionUtil.canFreeDirectBuffer() so that an allocator decides
which buffer type to use safely
- Remove HttpRequestEncoder after handshaking is complete
- Fix a bug in the WebSocket client example where it sends a frame even before handshake is complete
* Update toString() of all HttpObject implementations
* HttpMessageDecoder does not raise an exception but sets decoderResult property of the decoded message.
* HttpMessageDecoder discards inbound traffic once decoding fails, by adding a new state called BAD_MESSAGE.
* Add a test case that tests this behavior.
* Add DecodeResult that represents the result of decoding a message
* Add HttpObject which HttpMessage and HttpChunk extend.
** HttpObject has a property 'decodeResult'
Channel handlers above the HttpEncoder may delay the repsonse being
written to the socket. We need to wait for the response to complete
before upgrading the pipeline.
- Replace ByteBufferBackedByteBuf with DirectByteBuf
- Make DirectByteBuf and HeapByteBuf dynamic
- Remove DynamicByteBuf
- Replace Unpooled.dynamicBuffer() with Unpooled.buffer() and
directBuffer()
- Remove ByteBufFactory (will be replaced with ByteBufPool later)
- Add ByteBuf.Unsafe (might change in the future)
- Removed VoidEnum because a user can now specify Void instead
- AIO: Prefer discardReadBytes to clear
- AIO: Fixed a potential bug where notifyFlushFutures() is not called
if flush() was requested with no outbound data
- Add Channel.metadata() and remove Channel.bufferType()
- DefaultPipeline automatically redirects disconnect() request to
close() if the channel has no disconnect operation
- Remove unnecessary disconnect() implementations
- Rename ZlibEncoder/Decoder to JZlibEncoder/Decoder
- Define a new ZlibEncoder/Decoder class
- Add JdkZlibEncoder
- All JZlib* and JdkZlib* extends ZlibEncoder/Decoder
- Add ZlibCodecFactory and use it everywhere
