Motivation:
decodeHexNibble can be a lot faster using a lookup table
Modifications:
decodeHexNibble is made faster by using a lookup table
Result:
decodeHexNibble is faster
Motivation:
Currently, characters are appended to the encoded string char-by-char even when no encoding is needed. We can instead separate out codepath that appends the entire string in one go for better `StringBuilder` allocation performance.
Modification:
Only go into char-by-char loop when finding a character that requires encoding.
Result:
The results aren't so clear with noise on my hot laptop - the biggest impact is on long strings, both to reduce resizes of the buffer and also to reduce complexity of the loop. I don't think there's a significant downside though for the cases that hit the slow path.
After
```
Benchmark Mode Cnt Score Error Units
QueryStringEncoderBenchmark.longAscii thrpt 6 1.406 ± 0.069 ops/us
QueryStringEncoderBenchmark.longAsciiFirst thrpt 6 0.046 ± 0.001 ops/us
QueryStringEncoderBenchmark.longUtf8 thrpt 6 0.046 ± 0.001 ops/us
QueryStringEncoderBenchmark.shortAscii thrpt 6 15.781 ± 0.949 ops/us
QueryStringEncoderBenchmark.shortAsciiFirst thrpt 6 3.171 ± 0.232 ops/us
QueryStringEncoderBenchmark.shortUtf8 thrpt 6 3.900 ± 0.667 ops/us
```
Before
```
Benchmark Mode Cnt Score Error Units
QueryStringEncoderBenchmark.longAscii thrpt 6 0.444 ± 0.072 ops/us
QueryStringEncoderBenchmark.longAsciiFirst thrpt 6 0.043 ± 0.002 ops/us
QueryStringEncoderBenchmark.longUtf8 thrpt 6 0.047 ± 0.001 ops/us
QueryStringEncoderBenchmark.shortAscii thrpt 6 16.503 ± 1.015 ops/us
QueryStringEncoderBenchmark.shortAsciiFirst thrpt 6 3.316 ± 0.154 ops/us
QueryStringEncoderBenchmark.shortUtf8 thrpt 6 3.776 ± 0.956 ops/us
```
Motivation:
In Java, it is almost always at least slower to use `ByteBuffer` than `byte[]` without pooling or I/O. `QueryStringDecoder` can use `byte[]` with arguably simpler code.
Modification:
Replace `ByteBuffer` / `CharsetDecoder` with `byte[]` and `new String`
Result:
After
```
Benchmark Mode Cnt Score Error Units
QueryStringDecoderBenchmark.noDecoding thrpt 6 5.612 ± 2.639 ops/us
QueryStringDecoderBenchmark.onlyDecoding thrpt 6 1.393 ± 0.067 ops/us
QueryStringDecoderBenchmark.mixedDecoding thrpt 6 1.223 ± 0.048 ops/us
```
Before
```
Benchmark Mode Cnt Score Error Units
QueryStringDecoderBenchmark.noDecoding thrpt 6 6.123 ± 0.250 ops/us
QueryStringDecoderBenchmark.onlyDecoding thrpt 6 0.922 ± 0.159 ops/us
QueryStringDecoderBenchmark.mixedDecoding thrpt 6 1.032 ± 0.178 ops/us
```
I notice #6781 switched from an array to `ByteBuffer` but I can't find any motivation for that in the PR. Unit tests pass fine with an array and we get a reasonable speed bump.
Motivation
JMH 1.22 was released recently, we might as well use the latest when
running benchmarks.
Summary of changes:
https://mail.openjdk.java.net/pipermail/jmh-dev/2019-November/002879.html
Modifications
Update jmh dependencies in microbench module from version 1.21 to 1.22.
Result
Benchmarks run using latest JMH
Motivation:
Netty homepage(netty.io) serves both "http" and "https".
It's recommended to use https than http.
Modification:
I changed from "http://netty.io" to "https://netty.io"
Result:
No effects.
Motivation:
The previous used maxHeaderListSize was too low which resulted in exceptions during the benchmark run:
```
io.netty.handler.codec.http2.Http2Exception: Header size exceeded max allowed size (8192)
at io.netty.handler.codec.http2.Http2Exception.connectionError(Http2Exception.java:103)
at io.netty.handler.codec.http2.Http2Exception.headerListSizeError(Http2Exception.java:188)
at io.netty.handler.codec.http2.Http2CodecUtil.headerListSizeExceeded(Http2CodecUtil.java:231)
at io.netty.handler.codec.http2.HpackDecoder$Http2HeadersSink.finish(HpackDecoder.java:545)
at io.netty.handler.codec.http2.HpackDecoder.decode(HpackDecoder.java:132)
at io.netty.handler.codec.http2.HpackDecoderBenchmark.decode(HpackDecoderBenchmark.java:85)
at io.netty.handler.codec.http2.generated.HpackDecoderBenchmark_decode_jmhTest.decode_thrpt_jmhStub(HpackDecoderBenchmark_decode_jmhTest.java:120)
at io.netty.handler.codec.http2.generated.HpackDecoderBenchmark_decode_jmhTest.decode_Throughput(HpackDecoderBenchmark_decode_jmhTest.java:83)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:498)
at org.openjdk.jmh.runner.BenchmarkHandler$BenchmarkTask.call(BenchmarkHandler.java:453)
at org.openjdk.jmh.runner.BenchmarkHandler$BenchmarkTask.call(BenchmarkHandler.java:437)
at java.util.concurrent.FutureTask.run(FutureTask.java:266)
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:511)
at java.util.concurrent.FutureTask.run(FutureTask.java:266)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1149)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624)
at io.netty.util.concurrent.FastThreadLocalRunnable.run(FastThreadLocalRunnable.java:30)
at java.lang.Thread.run(Thread.java:748)
```
Also we should ensure we only use ascii for header names.
Modifications:
Just use Integer.MAX_VALUE as limit
Result:
Be able to run benchmark without exceptions
Motivation:
Some methods that either override others or are implemented as part of implementation an interface did miss the `@Override` annotation
Modifications:
Add missing `@Override`s
Result:
Code cleanup
Motivation:
SpotJMHBugs reports that accumulating a value as a way of eliding dead code
elimination may be inadvisable, as discussed in
`JMHSample_34_SafeLooping::measureWrong_2`. Change the test so that it consumes
the response with `Blackhole::consume` instead.
Modifications:
- Replace addition of results with explicit `blackhole.consume()` call
Result:
Tests work as before, but with different benchmark numbers.
Motivation:
Some JMH benchmarks need additional explanations to motivate
specific code choices.
Modifications:
Introduced comment to explai why calling BlackHole::consume
in a loop is not always the right choice for some benchmark.
Result:
The relevant method shows a comment that warn about changing
the code to introduce BlackHole::consume in the loop.
Motivation:
Resolve the issue highlighted by SpotJMHBugs that the creation of the RecyclableArrayList may be elided by the JIT since the result isn't consumed or returned.
Modifications:
Return the result of `list.recycle()` so that the list isn't elided.
Result:
The JMH benchmark shows a change in performance indicating that the prior results of this may be unsound.
Motivation:
The wakeup logic in EpollEventLoop is overly complex
Modification:
* Simplify the race to wakeup the loop
* Dont let the event loop wake up itself (it's already awake!)
* Make event loop check if there are any more tasks after preparing to
sleep. There is small window where the non-eventloop writers can issue
eventfd writes here, but that is okay.
Result:
Cleaner wakeup logic.
Benchmarks:
```
BEFORE
Benchmark Mode Cnt Score Error Units
EpollSocketChannelBenchmark.executeMulti thrpt 20 408381.411 ± 2857.498 ops/s
EpollSocketChannelBenchmark.executeSingle thrpt 20 157022.360 ± 1240.573 ops/s
EpollSocketChannelBenchmark.pingPong thrpt 20 60571.704 ± 331.125 ops/s
Benchmark Mode Cnt Score Error Units
EpollSocketChannelBenchmark.executeMulti thrpt 20 440546.953 ± 1652.823 ops/s
EpollSocketChannelBenchmark.executeSingle thrpt 20 168114.751 ± 1176.609 ops/s
EpollSocketChannelBenchmark.pingPong thrpt 20 61231.878 ± 520.108 ops/s
```
Motivation
Pipeline handlers are free to "take control" of input buffers if they have singular refcount - in particular to mutate their raw data if non-readonly via discarding of read bytes, etc.
However there are various places (primarily unit tests) where a wrapped byte-array buffer is passed in and the wrapped array is assumed not to change (used after the wrapped buffer is passed to EmbeddedChannel.writeInbound()). This invalid assumption could result in unexpected errors, such as those exposed by #8931.
Modifications
Anywhere that the data passed to writeInbound() might be used again, ensure that either:
- A copy is used rather than wrapping a shared byte array, or
- The buffer is otherwise protected from modification by making it read-only
For the tests, copying is preferred since it still allows the "mutating" optimizations to be exercised.
Results
Avoid possible errors when pipeline assumes it has full control of input buffer.
Motivation:
Results are just wrong for small delays.
Modifications:
Switching to AvarageTime avoid to rely on OS nanoTime granularity.
Result:
Uncontended low delay results are not reliable
Motivation:
In 42742e233f we already added default methods to Channel*Handler and deprecated the Adapter classes to simplify the class hierarchy. With this change we go even further and merge everything into just ChannelHandler. This simplifies things even more in terms of class-hierarchy.
Modifications:
- Merge ChannelInboundHandler | ChannelOutboundHandler into ChannelHandler
- Adjust code to just use ChannelHandler
- Deprecate old interfaces.
Result:
Cleaner and simpler code in terms of class-hierarchy.
Motivation:
As we now us java8 as minimum java version we can deprecate ChannelInboundHandlerAdapter / ChannelOutboundHandlerAdapter and just move the default implementations into the interfaces. This makes things a bit more flexible for the end-user and also simplifies the class-hierarchy.
Modifications:
- Mark ChannelInboundHandlerAdapter and ChannelOutboundHandlerAdapter as deprecated
- Add default implementations to ChannelInboundHandler / ChannelOutboundHandler
- Refactor our code to not use ChannelInboundHandlerAdapter / ChannelOutboundHandlerAdapter anymore
Result:
Cleanup class-hierarchy and make things a bit more flexible.
Motivation:
Netty is very widely used which can lead to a lot of pain when we break API / ABI. We should make use japicmp-maven-plugin during the build to verify we do not introduce breakage by mistake.
Modifications:
- Add japicmp-maven-plugin to the build process
- Fix a method signature change in HttpProxyHandler that was flagged as a possible problem.
Result:
Ensure no API/ABI breakage accour between releases.
Motivation:
We can remove some properties for which we introduced replacements.
Modifications:
io.netty.buffer.bytebuf.checkAccessible, io.netty.leakDetectionLevel, org.jboss.netty.tryUnsafe properties removed
Result:
Code cleanup
Motivation:
We can just use Objects.requireNonNull(...) as a replacement for ObjectUtil.checkNotNull(....)
Modifications:
- Use Objects.requireNonNull(...)
Result:
Less code to maintain.
Motivation:
Just was looking through code and found 1 interesting place DateFormatter.tryParseMonth that was not very effective, so I decided to optimize it a bit.
Modification:
Changed DateFormatter.tryParseMonth method. Instead of invocation regionMatch() for every month - compare chars one by one.
Result:
DateFormatter.parseHttpDate method performance improved from ~3% to ~15%.
Benchmark (DATE_STRING) Mode Cnt Score Error Units
DateFormatter2Benchmark.parseHttpHeaderDateFormatter Sun, 27 Jan 2016 19:18:46 GMT thrpt 6 4142781.221 ± 82155.002 ops/s
DateFormatter2Benchmark.parseHttpHeaderDateFormatter Sun, 27 Dec 2016 19:18:46 GMT thrpt 6 3781810.558 ± 38679.061 ops/s
DateFormatter2Benchmark.parseHttpHeaderDateFormatterNew Sun, 27 Jan 2016 19:18:46 GMT thrpt 6 4372569.705 ± 30257.537 ops/s
DateFormatter2Benchmark.parseHttpHeaderDateFormatterNew Sun, 27 Dec 2016 19:18:46 GMT thrpt 6 4339785.100 ± 57542.660 ops/s
Motivation:
ChannelHandler.exceptionCaught(...) was marked as @deprecated as it should only exist in inbound handlers.
Modifications:
Remove ChannelHandler.exceptionCaught(...) and adjust code / tests.
Result:
Fixes https://github.com/netty/netty/issues/8527
Motivation:
HttpHeaderDateFormat was replaced with DateFormatter many days ago and now can be easily removed.
Modification:
Remove deprecated class and related test / benchmark
Result:
Less code to maintain
Motivation:
We can use lambdas now as we use Java8.
Modification:
use lambda function for all package, #8751 only migrate transport package.
Result:
Code cleanup.
Motivation:
We need to update to a new checkstyle plugin to allow the usage of lambdas.
Modifications:
- Update to new plugin version.
- Fix checkstyle problems.
Result:
Be able to use checkstyle plugin which supports new Java syntax.
* Decouble EventLoop details from the IO handling for each transport to allow easy re-use of code and customization
Motiviation:
As today extending EventLoop implementations to add custom logic / metrics / instrumentations is only possible in a very limited way if at all. This is due the fact that most implementations are final or even package-private. That said even if these would be public there are the ability to do something useful with these is very limited as the IO processing and task processing are very tightly coupled. All of the mentioned things are a big pain point in netty 4.x and need improvement.
Modifications:
This changeset decoubled the IO processing logic from the task processing logic for the main transport (NIO, Epoll, KQueue) by introducing the concept of an IoHandler. The IoHandler itself is responsible to wait for IO readiness and process these IO events. The execution of the IoHandler itself is done by the SingleThreadEventLoop as part of its EventLoop processing. This allows to use the same EventLoopGroup (MultiThreadEventLoupGroup) for all the mentioned transports by just specify a different IoHandlerFactory during construction.
Beside this core API change this changeset also allows to easily extend SingleThreadEventExecutor / SingleThreadEventLoop to add custom logic to it which then can be reused by all the transports. The ideas are very similar to what is provided by ScheduledThreadPoolExecutor (that is part of the JDK). This allows for example things like:
* Adding instrumentation / metrics:
* how many Channels are registered on an SingleThreadEventLoop
* how many Channels were handled during the IO processing in an EventLoop run
* how many task were handled during the last EventLoop / EventExecutor run
* how many outstanding tasks we have
...
...
* Implementing custom strategies for choosing the next EventExecutor / EventLoop to use based on these metrics.
* Use different Promise / Future / ScheduledFuture implementations
* decorate Runnable / Callables when submitted to the EventExecutor / EventLoop
As a lot of functionalities are folded into the MultiThreadEventLoopGroup and SingleThreadEventLoopGroup this changeset also removes:
* AbstractEventLoop
* AbstractEventLoopGroup
* EventExecutorChooser
* EventExecutorChooserFactory
* DefaultEventLoopGroup
* DefaultEventExecutor
* DefaultEventExecutorGroup
Result:
Fixes https://github.com/netty/netty/issues/8514 .
Motivation:
Custom Netty ThreadLocalRandom and ThreadLocalRandomProvider classes are no longer needed and can be removed.
Modification:
Remove own ThreadLocalRandom
Result:
Less code to maintain
Motivation:
We can use the diamond operator these days.
Modification:
Use diamond operator whenever possible.
Result:
More modern code and less boiler-plate.
Motivation:
Invoking ChannelHandlers is not free and can result in some overhead when the ChannelPipeline becomes very long. This is especially true if most handlers will just forward the call to the next handler in the pipeline. When the user extends Channel*HandlerAdapter we can easily detect if can just skip the handler and invoke the next handler in the pipeline directly. This reduce the overhead of dispatch but also reduce the call-stack in many cases.
Modifications:
Detect if we can skip the handler when walking the pipeline.
Result:
Reduce overhead for long pipelines.
Benchmark (extraHandlers) Mode Cnt Score Error Units
DefaultChannelPipelineBenchmark.propagateEventOld 4 thrpt 10 267313.031 ± 9131.140 ops/s
DefaultChannelPipelineBenchmark.propagateEvent 4 thrpt 10 824825.673 ± 12727.594 ops/s
Motiviation:
Because of how we implemented the registration / deregistration of an EventLoop it was not possible to wrap an EventLoop implementation and use it with a Channel.
Modification:
- Introduce EventLoop.Unsafe which is responsible for the actual registration.
- Move validation of EventLoop / Channel combo to the EventLoop
- Add unit test that verifies that wrapping works
Result:
Be able to wrap an EventLoop and so add some extra functionality.
Motivation:
At the moment it’s possible to have a Channel in Netty that is not registered / assigned to an EventLoop until register(...) is called. This is suboptimal as if the Channel is not registered it is also not possible to do anything useful with a ChannelFuture that belongs to the Channel. We should think about if we should have the EventLoop as a constructor argument of a Channel and have the register / deregister method only have the effect of add a Channel to KQueue/Epoll/... It is also currently possible to deregister a Channel from one EventLoop and register it with another EventLoop. This operation defeats the threading model assumptions that are wide spread in Netty, and requires careful user level coordination to pull off without any concurrency issues. It is not a commonly used feature in practice, may be better handled by other means (e.g. client side load balancing), and therefore we propose removing this feature.
Modifications:
- Change all Channel implementations to require an EventLoop for construction ( + an EventLoopGroup for all ServerChannel implementations)
- Remove all register(...) methods from EventLoopGroup
- Add ChannelOutboundInvoker.register(...) which now basically means we want to register on the EventLoop for IO.
- Change ChannelUnsafe.register(...) to not take an EventLoop as parameter (as the EventLoop is supplied on custruction).
- Change ChannelFactory to take an EventLoop to create new Channels and introduce ServerChannelFactory which takes an EventLoop and one EventLoopGroup to create new ServerChannel instances.
- Add ServerChannel.childEventLoopGroup()
- Ensure all operations on the accepted Channel is done in the EventLoop of the Channel in ServerBootstrap
- Change unit tests for new behaviour
Result:
A Channel always has an EventLoop assigned which will never change during its life-time. This ensures we are always be able to call any operation on the Channel once constructed (unit the EventLoop is shutdown). This also simplifies the logic in DefaultChannelPipeline a lot as we can always call handlerAdded / handlerRemoved directly without the need to wait for register() to happen.
Also note that its still possible to deregister a Channel and register it again. It's just not possible anymore to move from one EventLoop to another (which was not really safe anyway).
Fixes https://github.com/netty/netty/issues/8513.
Motivation:
ByteBuf supports “marker indexes”. The intended use case for these is if a speculative operation (e.g. decode) is in process the user can “mark” and interface and refer to it later if the operation isn’t successful (e.g. not enough data). However this is rarely used in practice,
requires extra memory to maintain, and introduces complexity in the state management for derived/pooled buffer initialization, resizing, and other operations which may modify reader/writer indexes.
Modifications:
Remove support for marking and adjust testcases / code.
Result:
Fixes https://github.com/netty/netty/issues/8535.
Motivation:
Netty executors doesn't have yet any means to compare with each others
nor to compare with the j.u.c. executors
Modifications:
A new benchmark measuring execute burst cost is being added
Result:
It's now possible to compare some of Netty executors with each others
and with the j.u.c. executors
Motivation:
CompositeByteBuf is a powerful and versatile abstraction, allowing for
manipulation of large data without copying bytes. There is still a
non-negligible cost to reading/writing however relative to "singular"
ByteBufs, and this can be mostly eliminated with some rework of the
internals.
My use case is message modification/transformation while zero-copy
proxying. For example replacing a string within a large message with one
of a different length
Modifications:
- No longer slice added buffers and unwrap added slices
- Components store target buf offset relative to position in
composite buf
- Less allocations, object footprint, pointer indirection, offset
arithmetic
- Use Component[] rather than ArrayList<Component>
- Avoid pointer indirection and duplicate bounds check, more
efficient backing array growth
- Facilitates optimization when doing bulk-inserts - inserting n
ByteBufs behind m is now O(m + n) instead of O(mn)
- Avoid unnecessary casting and method call indirection via superclass
- Eliminate some duplicate range/ref checks via non-checking versions of
toComponentIndex and findComponent
- Add simple fast-path for toComponentIndex(0); add racy cache of
last-accessed Component to findComponent(int)
- Override forEachByte0(...) and forEachByteDesc0(...) methods
- Make use of RecyclableArrayList in nioBuffers(int, int) (in line with
FasterCompositeByteBuf impl)
- Modify addComponents0(boolean,int,Iterable) to use the Iterable
directly rather than copy to an array first (and possibly to an
ArrayList before that)
- Optimize addComponents0(boolean,int,ByteBuf[],int) to not perform
repeated array insertions and avoid second loop for offset updates
- Simplify other logic in various places, in particular the general
pattern used where a sub-range is iterated over
- Add benchmarks to demonstrate some improvements
While refactoring I also came across a couple of clear bugs. They are
fixed in these changes but I will open another PR with unit tests and
fixes to the current version.
Result:
Much faster creation, manipulation, and access; many fewer allocations
and smaller footprint. Benchmark results to follow.
* Optimize AbstractByteBuf.getCharSequence() in US_ASCII case
Motivation:
Inspired by https://github.com/netty/netty/pull/8388, I noticed this
simple optimization to avoid char[] allocation (also suggested in a TODO
here).
Modifications:
Return an AsciiString from AbstractByteBuf.getCharSequence() if
requested charset is US_ASCII or ISO_8859_1 (latter thanks to
@Scottmitch's suggestion). Also tweak unit tests not to require Strings
and include a new benchmark to demonstrate the speedup.
Result:
Speed-up of AbstractByteBuf.getCharSequence() in ascii and iso 8859/1
cases
Motiviation:
At the moment whenever ensureAccessible() is called in our ByteBuf implementations (which is basically on each operation) we will do a volatile read. That per-se is not such a bad thing but the problem here is that it will also reduce the the optimizations that the compiler / jit can do. For example as these are volatile it can not eliminate multiple loads of it when inline the methods of ByteBuf which happens quite frequently because most of them a quite small and very hot. That is especially true for all the methods that act on primitives.
It gets even worse as people often call a lot of these after each other in the same method or even use method chaining here.
The idea of the change is basically just ue a non-volatile read for the ensureAccessible() check as its a best-effort implementation to detect acting on already released buffers anyway as even with a volatile read it could happen that the user will release it in another thread before we actual access the buffer after the reference check.
Modifications:
- Try to do a non-volatile read using sun.misc.Unsafe if we can use it.
- Add a benchmark
Result:
Big performance win when multiple ByteBuf methods are called from a method.
With the change:
UnsafeByteBufBenchmark.setGetLongUnsafeByteBuf thrpt 20 281395842,128 ± 5050792,296 ops/s
Before the change:
UnsafeByteBufBenchmark.setGetLongUnsafeByteBuf thrpt 20 217419832,801 ± 5080579,030 ops/s
Motivation:
We should use the latest jmh version which also supports -prof dtraceasm on MacOS.
Modifications:
Update to latest jmh version.
Result:
Better benchmark / profiling support on MacOS.
Motivation:
Some of the flags we used are not supported anymore on more recent JDK versions. We should just remove all of them and only keep what we really need. This may also reflect better what people use in production.
Modifications:
Remove some flags when running the benchmarks.
Result:
Benchmarks also run with JDK11.
Motivation:
It is sometimes useful to be able to run benchmarks easily from the commandline and passs different arguments / options here. We should support this.
Modifications:
Add the benchmark-jar profile which allows to generate such an "uber-jar" that can be used directly to run benchmarks as documented at http://openjdk.java.net/projects/code-tools/jmh/.
Result:
More flexible way to run benchmarks.
Motivation:
Optimizing the Epoll channel needs an objective measure of how fast
it is.
Modification:
Add a simple, closed loop, ping-pong benchmark.
Result:
Benchmark can be used to measure #7816
Initial numbers:
```
Result "io.netty.microbench.channel.epoll.EpollSocketChannelBenchmark.pingPong":
22614.403 ±(99.9%) 797.263 ops/s [Average]
(min, avg, max) = (21093.160, 22614.403, 24977.387), stdev = 918.130
CI (99.9%): [21817.140, 23411.666] (assumes normal distribution)
Benchmark Mode Cnt Score Error Units
EpollSocketChannelBenchmark.pingPong thrpt 20 22614.403 ± 797.263 ops/s
```
Motivation:
The JVM isn't always able to hoist out/reduce bounds checking (due to ref counting operations etc etc) hence making it configurable could improve performances for most CPU intensive use cases.
Modifications:
Each AbstractByteBuf bounds check has been tested against a new static final configuration property similar to checkAccessible ie io.netty.buffer.bytebuf.checkBounds.
Result:
Any user could disable ByteBuf bounds checking in order to get extra performances.
