Motivation:
If an error occurs during a write operation then DefaultHttp2ConnectionEncoder.FlowControlledData will clear the CoalescingBufferQueue which will reset the queue's readable bytes to 0. To recover from an error the DefaultHttp2RemoteFlowController will attempt to return bytes to the flow control window, but since the frame has reset its own size this will lead to invalid flow control accounting.
Modifications:
- DefaultHttp2ConnectionEncoder.FlowControlledData should not reset its size if an error occurs
Result:
No more flow controller errors due to DefaultHttp2ConnectionEncoder.FlowControlledData setting its size to 0 if an error occurs.
Motivation:
PromiseAggregator's API allows for the aggregate promise to complete before the user is done adding promises. In order to support this use case the API structure would need to change in a breaking manner.
Modifications:
- Deprecate PromiseAggregator and subclasses
- Introduce PromiseCombiner which corrects these issues
Result:
PromiseCombiner corrects the deficiencies in PromiseAggregator.
Motivation:
PendingWriteQueue should guard against re-entrant writes once
removeAndFailAll() is run.
Modifications:
removeAndFailAll() should repeat until the queue is finally empty.
Result:
assertEmpty() will always hold.
Motivation:
We should guard users from using Unsafe methods from outside the EventLoop if not designed to do so.
Modifications:
Add asserts
Result:
Easier for users to detect miss-use.
Motivation:
e2f5012 added unit tests which did not verify the buffer was released as it was intended to.
Modification:
- Unit tests must verify release is called
Result:
Unit tests enforce that ByteBufs are released.
Motivation:
DefaultChannelHandlerInvoker.invokeWrite calls a utility method validatePromise which may throw if the arguments are not valid. If this method throws then the message will not be released.
Modifications:
- If an exception is thrown the message should be released
Result:
No more leak in DefaultChannelHandlerInvoker.invokeWrite
Motivation:
See #3746.
Modifications:
Fork SpscLinkedQueue and SpscLinkedAtomicQueue from JCTools based on 7846450e28
Result:
Add SpscLinkedQueue and SpscLinkedAtomicQueue and apply it in LocalChannel.
Motiviation:
We should ensure that handlerAdded(...) and handlerRemoved(...) is always called from the EventExecutor that also invokes the other methods of the ChannelHandler. Also we need to ensure we always call handlerAdded(...) before any other method can be calld to ensure correct ordering.
Motifications:
- Ensure that the right thread is used to call the methods
- Ensure correct ordering
- Add tests
Result:
Respect the thread-model for handlerAdded(...) and handlerRemoved(...) and preserve correct ordering in all cases.
Motivation:
The implementation of obtaining the best possible mac address is very good. There are many sub-par implementations proposed on stackoverflow.
While not strictly a netty concern, it would be nice to offer this util also to netty users.
Modifications:
extract DefaultChannelId#defaultMachineId code obtaining the "best" mac into a new helper called MacAddress, keep the random bytes fallback in DefaultChannelID.
Result:
New helper available.
Motivation:
When a channel was registered before and is re-registered we need to respect ChannelConfig.isAutoRead() and so start reading one the registration task completes. This was done "by luck" before 15162202fb.
Modifications:
Explicit start reading once a Channel was re-registered if isAutoRead() is true.
Result:
Correctly receive data after re-registration completes.
Motivation:
Due a regression introduced by e969b6917c we missed to pass the original ChannelPromise to the next ChannelOutboundHandler and so
may never notify the origin ChannelPromise. This is related to #4805.
Modifications:
- Correctly pass the ChannelPromise
- Add unit test.
Result:
Correctly pass the ChannelPromise on deregister(...)
Motivation:
fix the issue netty#2944
Modifications:
use - instead of =>, use ! instead of :> due to the connection is bidirectional. What's more, toString() method don't know the direction or there is no need to know the direction when only log channel information.
add L： before local address and R: before remote address.
Result:
after the fix, log won't confuse the user
Motivation:
The AbstractChannel(Channel parent) constructor was previously hard-coded to always
call DefaultChannelId.newInstance(), and this made it difficult to use a custom
ChannelId implementation with some commonly used Channel implementations.
Modifications:
Introduced newId() method in AbstractChannel, which by default returns
DefaultChannelId.newInstance() but can be overridden by subclasses. Added
ensureDefaultChannelId() test to AbstractChannelTest, to ensure the prior
behavior of calling DefaultChannelId.newInstance() still holds with the
AbstractChannel(Channel parent) constructor.
Result:
AbstractChannel now has the protected newId() method, but there is no functional
difference.
Motivation:
A few implementations of OioServerChannel have a default max messages per read set to 16. We should set the default to 1 to prevent blocking on a read before setting a socket that has just been accepted.
Modifications:
- OioSctpServerChannel and OioServerSocketChannel metadata changed to use the default (1) max messages per read
Result:
Oio based servers will complete accepting a socket before potentially blocking waiting to accept other sockets.
Motivation:
If a user adds a ChannelHandler from outside the EventLoop it is possible to get into the situation that handlerAdded(...) is scheduled on the EventLoop and so called after another methods of the ChannelHandler as the EventLoop may already be executing on this point in time.
Modification:
- Ensure we always check if the handlerAdded(...) method was called already and if not add the currently needed call to the EventLoop so it will be picked up after handlerAdded(...) was called. This works as if the handler is added to the ChannelPipeline from outside the EventLoop the actual handlerAdded(...) operation is scheduled on the EventLoop.
- Some cleanup in the DefaultChannelPipeline
Result:
Correctly order of method executions of ChannelHandler.
Motivation:
ChannelOutboundHandlerAdapter's javadoc has some minor issues.
Modifications:
Fix the minor javadoc issues and resolves#4752.
Result:
ChannelOutboundHandlerAdapter's javadoc issues are fixed.
Motivation:
Being able to access the invoker() is useful when adding additional
handlers that should be running in the same thread. Since an application
may be using a threading model unsupported by the default invoker, they
can specify their own. Because of that, in a handler that auto-adds
other handlers:
// This is a good pattern
ctx.pipeline().addBefore(ctx.invoker(), ctx.name(), null, newHandler);
// This will generally work, but prevents using custom invoker.
ctx.pipeline().addBefore(ctx.executor(), ctx.name(), null, newHandler);
That's why I believe in commit 110745b0, for the now-defunct 5.0 branch,
when ChannelHandlerAppender was added the invoker() method was also
necessary.
There is a side-benefit to exposing the invoker: in certain advanced
use-cases using the invoker for a particular handler is useful. Using
the invoker you are able to invoke a _particular_ handler, from possibly
a different thread yet still using standard exception processing.
ChannelHandlerContext does part of that, but is unwieldy when trying to
invoke a particular handler because it invokes the prev or next handler,
not the one the context is for. A workaround is to use the next or prev
context (respectively), but this breaks when the pipeline changes.
This came up during writing the Http2MultiplexCodec which uses a
separate child channel for each http/2 stream and wants to send messages
from the child channel directly to the Http2MultiplexCodec handler that
created it.
Modifications:
Add the invoker() method to ChannelHandlerContext. It was already being
implemented by AbstractChannelHandlerContext. The two other
implementations of ChannelHandlerContext needed minor tweaks.
Result:
Access to the invoker used for a particular handler, for either reusing
for other handlers or for advanced use-cases. Fixes#4738
Motivation:
ChannelInboundHandler and ChannelOutboundHandler both can implement exceptionCaught(...) method and so we need to dispatch to both of them.
Modifications:
- Correctly first dispatch exceptionCaught to the ChannelInboundHandler but also make sure the next handler it will be dispatched to will be the ChannelOutboundHandler
- Add removeInboundHandler() and removeOutboundHandler() which allows to remove one of the combined handlers
- Let *Codec extends it and not ChannelHandlerAppender
- Remove ChannelHandlerAppender
Result:
Correctly handle events and also have same behavior as in 4.0
Motivation:
Our contract in Channels is that the promise should always be notified before the actual callbacks of the ChannelInboundHandler are called. This was not done in the LocalChannel and so the behavior was different to other Channel implementations.
Modifications:
- First complete the ChannelPromise then call fireChannelActive()
- Guard against NPE when doClose() was called before the task was executed.
Result:
Consistent behavior between LocalChannel and other Channel implementations.
Motivation:
In AbstractChannelTest we not correctly mocked some methods which could lead to test errors. That said it only showed up here when running from the IDE and not from the cmdLine.
Modifications:
Mock methods that are needed for the test
Result:
Test pass in the IDE as well.
Motivation:
At the moment EmbeddedChannel always handle close() and disconnect() the same way which also means that ChannelOutboundHandler.disconnect(...) will never called. We should allow to specify if these are handle different or not to make the use of EmbeddedChannel more flexible.
Modifications:
Add 2 other constructors which allow to specify if disconnect / close are handled the same way or differently.
Result:
More flexible usage of EmbeddedChannel possible.
Motivation:
Boxing/unboxing can be avoided.
Modifications:
Use parseInt/parseLong to avoid unnecessary boxing/unboxing.
Result:
Remove unnecessary boxing/unboxing.
Motivation:
The prefix fix of #2363 did not correctly handle the case when selectAgain is true and so missed to null out entries.
Modifications:
Move the i++ from end of loop to beginning of loop
Result:
Entries in the array will be null out so allow to have these GC'ed once the Channel close
Motivation:
We often used synchronized(this) while the whole method was synchronized, which can be simplified by just mark the whole method as synchronized.
Modifications:
Replace synchronized(this) with synchronized on the method
Result:
Cleaner code
Motivation:
Warnings in IDE, unclean code, negligible performance impact.
Modification:
Deletion of unused imports
Result:
No more warnings in IDE, cleaner code, negligible performance improvement.
Motivation:
Javadoc reports errors about invalid docs.
Modifications:
Fix some errors reported by javadoc.
Result:
A lot of javadoc errors are fixed by this patch.
Motivation:
There are some wrong links and tags in javadoc.
Modifications:
Fix the wrong links and tags in javadoc.
Result:
These links will work correctly in javadoc.
Motivation:
As a user may call deregister() from within any method while doing processing in the ChannelPipeline, we need to ensure we do the actual deregister operation later. This is needed as for example, we may be in the ByteToMessageDecoder.callDecode(...) method and so still try to do processing in the old EventLoop while the user already registered the Channel to a new EventLoop. Without delay, the deregister operation this could lead to have a handler invoked by different EventLoop and so threads.
Modifications:
Ensure the actual deregister will be done later on and not directly when invoked.
Result:
Calling deregister() within ByteToMessageDecoder.decode(..) is safe.
Motivation:
Estimation algorithm currently used for WriteTasks is complicated and
wrong. Additionally, some code relies on outbound buffer size
incremented only on actual writes to the outbound buffer.
Modifications:
- Throw away the old estimator and replace with a simple algorithm that
uses the client-provided estimator along with a statically configured
WriteTask overhead (io.netty.transport.writeTaskSizeOverhead system
property with the default value of 48 bytes)
- Add a io.netty.transport.estimateSizeOnSubmit boolean system property
allowing the clients to disable the message estimation outside the
event loop
Result:
Task estimation is user controllable and produces better results by
default
Motivation:
As discussed in #4529, NameResolver design shouldn't be resolving SocketAddresses (or String name + port) and return InetSocketAddresses. It should resolve String names and return InetAddresses.
This SocketAddress to InetSocketAddresses resolution is actually a different concern, used by Bootstrap.
Modifications:
Extract SocketAddress to InetSocketAddresses resolution concern to a new class hierarchy named AddressResolver.
These AddressResolvers delegate to NameResolvers.
Result:
Better separation of concerns.
Note that new AddressResolvers generate a bit more allocations because of the intermediate Promise and List<InetAddress>.
Motivation:
We need to remove all registered events for a Channel from the EventLoop before doing the actual close to ensure we not produce a cpu spin when the actual close operation is delayed or executed outside of the EventLoop.
Modifications:
Deregister for events for NIO and EPOLL socket implementations when SO_LINGER is used.
Result:
No more cpu spin.
Motivation:
Fix a race-condition when closing NioSocketChannel or EpollSocketChannel while try to detect if a close executor should be used and the underlying socket was already closed. This could lead to an exception that then leave the channel / in an invalid state and so could lead to side-effects like heavy CPU usage.
Modifications:
Catch possible socket exception while try to get the SO_LINGER options from the underlying socket.
Result:
No more race-condition when closing the channel is possible with bad side-effects.
Motivation:
ChannelMetadata has a field minMaxMessagesPerRead which can be confusing. There are also some cases where static instances are used and the default value for channel type is not being applied.
Modifications:
- use a default value which is set unconditionally to simplify
- make sure static instances of MaxMessagesRecvByteBufAllocator are not used if the intention is that the default maxMessagesPerRead should be derived from the channel type.
Result:
Less confusing interfaces in ChannelMetadata and ChannelConfig. Default maxMessagesPerRead is correctly applied.
Motivation:
The CoalescingBufferQueueTest is somewhat relaxed with its releasing of test buffers, using safeRelease to generically deal with tests that may or may not release the buffers. SafeRelease generates logs, however, when the release fails.
Modifications:
Tightened up the individual test methods to verify that the buffers are released properly.
Result:
Fixes#4497
Motivation:
The javadocs for ChannelOption.AUTO_CLOSE say the default is false, but the default is currently true.
Modifications:
- Make javadocs consistent with code
Result:
Less confusing docs.
Motivation:
exceptionCaught(...) will only handle inbound exceptions which means it makes not much sense to have it also on ChannelOutboundHandler. Because of this we should move it to ChannelInboundHandler.
Modifications:
Add @deprecated annotation to ChannelHandler.exceptionCaught(...).
Result:
Preapre to cleanup the API in later release.
Motivation:
We should use OneTimeTask where possible to reduce object creation.
Modifications:
Replace Runnable with OneTimeTask
Result:
Less object creation
Motivation:
We not need to store another reference to AbstractChannel as we can access it through DefaultChannelHandlerContext.
Modifications:
Remove reference.
Result:
Cleaner code.
Motivation:
If you start to have 1M+ concurrent connections memory footprint can be come a big issue. We should try to reduce it as much as possible in the core of netty.
Modifications:
- Remove HashMap that was used to store name to ctx mapping. This was only used for validation and access a handler by name. As a pipeline is not expected to be very long (like 100+ handlers) we can just walk the linked list structure to find the ctx with a given name.
Result:
Less memory footprint of the DefaultChannelPipeline.
Motivation:
The previous DefaultChannelPipeline#destroy() implementation, introduced in #3156, is suboptimal as it can cause the for loop to continuously spin if the executor used by a given handler is unable to "recognize" the event loop.
It could be objected that it's the custom executor responsibility to properly implement the inEventLoop() method, but some implementetaions might not be able to do that for performance reasons, and even so, it's always better to be safe against API misuse, in particular when it is not possible to fail fast and the alternative is rather some sutle behaviour.
Modifications:
The patch simply avoids the recursive spin by explicitly passing the "in event loop" condition as a boolean parameter, preserving the same guarantees offered by #3156. A unit test has also been added.
Result:
All channel events are correctly called and no high CPU usage is seen anymore.
Motivation:
Changing the chache of generated names to use a cache per thread. This will remove the bottleneck when many eventloops are used and names need to generate.
Modifications:
Use a FastThreadLocal to store the cached names.
Result:
Less locking between threads.
Motivation:
We should only call ReferenceCountUtil.touch(...) if needed as otherwise we pay the overhead of instanceof and cast
everytime.
Modifications:
Add boolean flag which indicates if touch(...) should be called.
Result:
Less overhead when leak detection is not enabled.
Motiviation:
If a user writes from outside the EventLoop we increase the pending bytes of the outbound buffer before submitting the write request. This is done so the user can stop writing asap once the channel turns unwritable. Unfortunally this doesn't take the overhead of adding the task into the account and so it is very easy for an user to full up the task queue. Beside this we use a value of 0 for an unown message by default which is not ideal.
Modifications:
- port the message calculation we used in netty 3.x into AbstractChannelHandlerContext and so better calculate the overhead of a message that is submitted from outside the EventLoop
- change the default estimated size for an unknown message to 8.
Result:
Better behaviour when submiting writes from outside the EventLoop.
Motivation:
Once a FixedChannelPool was closed we must not allow to acquire or release Channels to prevent assert errors.
Modifications:
Fail release and acquire calls when FixedChannelPool is closed.
Result:
No more assert errors.1
Motivation:
As MaxMessageHandle is stateful we can not share the same HandleImpl instance as otherwise we will see race conditions.
Modifications:
Create a new HandleImpl instance on each newHandle() call.
Result:
No more races.
Motivation:
EmbeddedChannelId#hashCode() and equals() do not behave correctly if an
instance is serialized and then deserialized. Additionally,
EmbeddedChannel does not allow use of any other type of ChannelId, and
EmbeddedChannelId is (mostly) a singleton instance. This creates a
problem for unit tests that construct multiple EmbeddedChannels and
expect each channel to have a unique ID.
Modifications:
EmbeddedChannelId is modified so equals() will return true and
hashCode() will return the same value for any instance of the class.
EmbeddedChannel is modified to allow a ChannelId to be specified when
the channel is constructed. Tests added for both changes.
Result:
EmbeddedChannelId now behaves correctly when deserialized, and
EmbeddedChannels can now have unique IDs.
Motivation:
PendingWriteQueueTest needs some cleanup.
Modifications:
- Cleanup code to remove deprecation warnings
- use static imports
Result:
No more warnings
Motivation:
We missed to run all pending tasks when EmbeddedChannel.close(...) or disconnect(...) was called. Because of this channelInactive(...) / channelUnregistered(...) of the handlers were never called.
Modifications:
Correctly run all pending tasks and cancel all not ready scheduled tasks when close or disconnect was called.
Result:
Correctly run tasks on close / disconnect and have channelInactive(...) / channelUnregistered(...) called.
Motiviation:
We need to ensure the actual close to the transport takes place before the promsie of the write is notified that triggered it. This is needed as otherwise Channel.isActive(), isOpen() and isWritable() may return true even if the Channel should be closed already.
Modifications:
- Ensure the close takes place first
Result:
ChannelFutureListener will see the correct state of the Channel.
Motivation:
writeBytes(...) missed to set EPOLLOUT flag when not all bytes were written. This could lead to have the EpollEventLoop not try to flush the remaining bytes once the socket becomes writable again.
Modifications:
- Move setting EPOLLOUT flag logic to one point so we are sure we always do it.
- Move OP_WRITE flag logic to one point as well.
Result:
Correctly try to write pending data if socket becomes writable again.
Motivation:
RecvByteBufAllocator.DelegatingHandle does not provide an accessor to get the delegate handle. This may be useful for classes that extend DelegatingHandle.
Modifications:
- add delegate() method to DelegatingHandle
Result:
Classes which inherit from DelegatingHandle can now access the delegate Handle.
Motivation:
If LocalChannel doWrite executes while the peer's state changes from CONNECTED to CLOSED it is possible that some promise's won't be completed and buffers will be leaked.
Modifications:
- Check the peer's state in doWrite to avoid a race condition
Result:
All write operations should release, and the associated promise should be completed.
Motivation:
https://github.com/netty/netty/pull/4143 addressed a few ordering issues but an ordering issue still remained if the Promise for a write completes, and a listener of that promise does a write on a peer channel. The ordering was subject to how potentially 2 different executors would run a task, but it should be coordinated such that the first write is read first.
Modifications:
- Keep track of the finishPeerRead task run on the executor if necessary and ensure it completes before current channel read occurs
Result:
Ordering of events for echo type situations is preserved.
Motivation:
When a LocalChannel write operation occurs, the promise associated with the write operation is marked successful when it is added to the peer's queue, but before the peer has actually received the data. If the promise callback closes the channel then a race condition exists where the close event may occur before the data is delivered. We should preserve ordering of events.
Modifications:
- LocalChannel should track when a write is in progress, and if a close operation happens make sure the peer gets all pending read operations.
Result:
LocalChannel preserves order of operations.
Fixes https://github.com/netty/netty/issues/4118
Motivation:
Doc of ChannelGroup says, that it can be used to manage server and child channels at once.
However, in DefaultChannelGroup, there is a race condition. When a server channel accepts a child, it schedules its
registration on an event loop, which takes some time. If the ChannelGroup, which is supposed
to close server and child channels at once, is closed after the child channel has been scheduled
for registration and before this registration actually happens, this child channel is not closed
and remains connected. This could lead to connection leaks.
Modifications:
To fix this, the DefaultChannelGroup is changed to has a closed flag.
This flag is set to true, just before the close() method is actually closing channels.
The add() method checks after adding a new channel, if this flag has been set to true.
If yes, the new channel is closed. If not, we have the guarantee, that this channel will be
closed by the ChannelGroup, because setting the closed flag to true happens-before closing any channels.
This behaviour can be activated by two new constructors. The old constructors are still there and behave like before.
Therefore, no existing code should be affected directly.
Result:
If activating this feature, the DefaultChannelGroup can be used, for managing server and child channels at once.
But this activating this feature means also, that a ChannelGroup cannot be reused after calling close().
Related issues:
- #3971
- #3973
- #3976
- #4035
Motivation:
1. Previously, DnsNameResolver.query() retried the request query by its
own. It prevents a user from deciding when to retry or stop. It is also
impossible to get the response object whose code is not NOERROR.
2. NameResolver does not have an operation that resolves a host name
into multiple addresses, like InetAddress.getAllByName()
Modifications:
- Changes related with DnsNameResolver.query()
- Make query() not retry
- Move the retry logic to DnsNameResolver.resolve() instead.
- Make query() fail the promise only when I/O error occurred or it
failed to get a response
- Add DnsNameResolverException and use it when query() fails so that
the resolver can give more information about the failure
- query() does not cache anymore.
- Changes related with NameResolver.resolveAll()
- Add NameResolver.resolveAll()
- Add SimpleNameResolver.doResolveAll()
- Changes related with DnsNameResolver.resolve() and resolveAll()
- Make DnsNameResolveContext abstract so that DnsNameResolver can
decide to get single or multiple addresses from it
- Re-implement cache so that the cache works for resolve() and
resolveAll()
- Add 'traceEnabled' property to enable/disable trace information
- Miscellaneous changes
- Use ObjectUtil.checkNotNull() wherever possible
- Add InternetProtocolFamily.addressType() to remove repetitive
switch-case blocks in DnsNameResolver(Context)
- Do not raise an exception when decoding a truncated DNS response
Result:
- Full control over query()
- A user can now retrieve all addresses via (Dns)NameResolver.resolveAll()
- DNS cache works only for resolve() and resolveAll() now.
Motivation:
When releasing unhealthy channel back to a pool we don't have to offer it since on acquire it will be discarded anyways.
Also checking healthiness at release is a good idea so we don't end up having tons of unhealthy channels in the pool(unless they became unhealthy after being offered)
Modifications:
private SimpleChannelPool.offerIfHealthy() method added that is called from SimpleChannelPool.doReleaseChannel(). SimpleChannelPool.offerIfHealthy() offers channel back to pool only if channel is healthy.
Otherwise it throws setFailure exception to the promise.
Result:
The pool is now much cleaner and not spammed with unhealthy channels.
Added ability to choose if channel health has to be validated on release by passing boolean flag.
Motivation:
Depending on performance preferences and individual use cases sometimes we would like to be able force health check of a channel at release time and do not offer it back to the pool. Other times we would want to just release channel and offer it back to the pool and check health only when we try to acquire that channel from the pool. See more details here: https://github.com/netty/netty/issues/4077#issuecomment-130461684
Modifications:
Future<Void> release(Channel channel, Promise<Void> promise, boolean offerHealthyOnly);
The offerHealthyOnly boolean flag allows developers to choose whether to do channel validation before offering it back to pool or not.
Appropriate modifications made to hierarchy of implementations of ChannelPool. offerHealthyOnly=true will force channel health to be checked before offering back to pool. offerHealthyOnly=false will ignore channel health check and will just try just offer it back to the pool
offerHealthyOnly=true by default.
Result:
Channel health check before offer back to pool is controlled by a flag now.
Code changed to satisfy checkstyle requirements.
Motivation:
Code needs to satisfy checkstyle requirements.
Modifications:
SimpleChannelPool.java:279 line split to be less then 120 characters.
SimpleChannelPool.java:280:31 space added after '{'
SimpleChannelPool.java:282:17 space added after '{'
SimpleChannelPoolTest.java:198 - extra white space line removed.
Result:
Code satisfies checkstyle requirements.
offerHealthyOnly is passed as a constructor parameter now.
Motivation:
Instead of passing offerHealthyOnly as a method parameter it is better to pass it in as SimpleChannelPool or FixedChannelPool constructor.
Modifications:
Redundant release method that takes offerHealthyOnly removed from ChannelPool.
offerHealthyOnly parameter added to constructor for FixedChannelPool and SimpleChannelPool.
Result:
SimpleChannelPool and FixedChannelPool are now take offerHealthyOnly as a constructor parameter. Default behavior is: offerHealthyOnly=true.
Code changed to satisfy checkstyle requirements.
Motivation:
Code needs to satisfy checkstyle requirements.
Modifications:
SimpleChannelPool.java:84: line made to be no longer then 120 characters.
SimpleChannelPool.java:237: extra white space line removed.
Result:
Code satisfies checkstyle requirements.
Tests do not need to be too copled to the code. Exception message should not be validated
Motivation:
We don't need our tests to be too coupled to the code. Exception type validation in tests is just good enough.
Modifications:
Exception validation message removed from SimpleChannelPoolTest.testUnhealthyChannelIsNotOffered() test.
Result:
The SimpleChannelPoolTest test is less coupled to the code now.
Stack trace set to empty for UNHEALTHY_NON_OFFERED_TO_POOL.
Motivation:
We don't need stack trace for UNHEALTHY_NON_OFFERED_TO_POOL.
Modifications:
Added UNHEALTHY_NON_OFFERED_TO_POOL.setStackTrace(EmptyArrays.EMPTY_STACK_TRACE) to static init block.
Result:
UNHEALTHY_NON_OFFERED_TO_POOL's stack trace set to empty.
Minor code re-factorings.
Motivation:
For better code readability we need to apply several minor code re-factorings.
Modifications:
javadocs true -> {@code true}
offerHealthyOnly variable name changed to releaseHeathCheck
<p/> -> <p> in javadocs
offerHealthyOnly removed from doReleaseChannel as it not needed there.
Result:
Code quality is improved.
Code changed to satisfy checkstyle requirements.
Motivation:
Code needs to satisfy checkstyle requirements.
Modifications:
SimpleChannelPool.java:87: line made to be no longer then 120 characters.
Result:
Code satisfies checkstyle requirements.
Pull request needs to contain only necessary changes
Motivation:
The pull request should not contain unnecessary changes that are not needed as part of required functionality of pull request.
Modifications:
private void doReleaseChannel(final Channel channel, final Promise<Void> promise) - > private void doReleaseChannel(Channel channel, Promise<Void> promise)
Result:
Pull request contains less unnecessary modifications.
Motivation:
The acquire channel function resulted in calling itself several times in case when channel polled from the pool queue was unhealthy, which resulted FixedChannelPool to be called several times which in it's turn caused FixedChannelPool.acquire() to be called and resulted into acquireChannelCount to be unnecessary increased.
Example use case:
1) Create FixedChannelPool instance with one channel in the pool: new FixedChannelPool(cb, handler, 1)
2) Acquire channel A from the pool
3) close the channel A
4) Return it back to the pool
5) Acquire channel from the same pool again
Expected result:
new channel created and acquired, channel A that has been closed discarded and removed from the pool from being unhealthy
Actual result:
Channel A had been removed from the pool, how ever the new channel had never be acquired, instead the request to acquire had been added to the pending queue in FixedChannelPool and the acquireChannelCount is increased by one. The reason is that at the time when SimpleChannelPool figured out that the channel was unhealthy called FixedChannelPool.acquire to try to acquire new channel, how ever the request was added to the pendingTakQueue because by the time when FixedChannelPool.acquire was called, the acquireChannelCount was already "1" so new channel ould not be created cause of maxChannelsLimit=1.
Modifications:
The suggested approach modifies the SimpleChannelPool in a way so that when channel detected to be unhealthy it calls private method SimpleChannelPool.acquireHealthyFromPoolOrNew() which guarantees that SimpleChannelPool actually either finds a healthy channel in the pool and returns it or causes the promise.cause() in case when new channel was failed to be created.
Result:
The ```acquiredChannelCount``` is now calculated correctly as a result of SimpleChannelPool.acquire() of not being recursive on overridable acquire method.
Motiviation:
The current read loops don't fascilitate reading a maximum amount of bytes. This capability is useful to have more fine grain control over how much data is injested.
Modifications:
- Add a setMaxBytesPerRead(int) and getMaxBytesPerRead() to ChannelConfig
- Add a setMaxBytesPerIndividualRead(int) and getMaxBytesPerIndividualRead to ChannelConfig
- Add methods to RecvByteBufAllocator so that a pluggable scheme can be used to control the behavior of the read loop.
- Modify read loop for all transport types to respect the new RecvByteBufAllocator API
Result:
The ability to control how many bytes are read for each read operation/loop, and a more extensible read loop.
Motivation:
We don't decrease acquired channel count in FixedChannelPool when timeout occurs by AcquireTimeoutAction.NEW and eventually fails.
Modifications:
Set AcquireTask.acquired=true to call decrementAndRunTaskQueue when timeout action fails.
Result:
Acquired channel count decreases correctly.
Motivation:
We missed to correctly count acquired channels in FixedChannelPool which could produce an assert error.
Modifications:
Only try to decrement acquired count if the channel was really acuired.
Result:
No more assert error possible.
Motivation:
If the Channel is already closed when the PendingWriteQueue is created it will generate a NPE when add or remove is called later.
Modifications:
Add null checks to guard against NPE.
Result:
No more NPE possible.
Motivation:
Test was leaving composite buffers taken from the queue unreleased.
Modifications:
Make the test release buffers.
Result:
Nagging about leaked buffers should stop.
Motivation:
Simplifies writing code that needs to merge or slice a sequence of buffer & promise pairs into chunks of arbitrary sizes.
For example in HTTP2 we merge or split buffers across fixed-size DATA frame boundaries.
Modifications:
Add new utility class CoalescingBufferQueue
Result:
Following this change HTTP2 code will switch to use it instead of CompositeByteBuffer for DATA frame coalescing.
Motivation:
While cherry-picked 11f9e9084b I changed the EmbeddedChannel implementation to not allow no ChannelHandlers when constructing it.
This was done by mistake.
Modifications:
Revert change and add unit test.
Result:
Restore old behavior.
Motivation:
When using an EmbeddedChannel often it either does inbound or outbound processing which means we only often need one queue.
Modifications:
Lazy init the inbound and outbound message queues.
Result:
Less memory usage.
Motivation:
At the moment we directly closed the Channel when an exception accoured durring initChannel(...) without giving the user any way to do extra or special handling.
Modifications:
Handle the exception in exceptionCaught(...) of the ChannelInitializer which will by default log and close the Channel. This way the user can override this.
Result:
More felixible handling of exceptions.
Motivation:
Currently in EmbeddedChannel we add the ChannelHandlers before the Channel is registered which leads to have the handlerAdded(...) callback
be called from outside the EventLoop and also prevent the user to obtain a reference to the EventLoop in the callback itself.
Modifications:
Delay adding ChannelHandlers until EmbeddedChannel is registered.
Result:
Correctly call handlerAdded(...) after EmbeddedChannel is registered.
Motivation:
If you set a ChannelHandler via ServerBootstrap.handler(...) it is added to the ChannelPipeline before the Channel is registered. This will lead to and IllegalStateException if a user tries to access the EventLoop in the ChannelHandler.handlerAdded(...) method.
Modifications:
Delay the adding of the ChannelHandler until the Channel was registered.
Result:
No more IllegalStateException.
Motivation:
Only one of the three FixedChannelPool constructors checks for the constructor
arguments. Therfore it was possible to create a pool with zero maxConnections.
This change chains all constructors together, so that the last one
in the chain always checks the validity of the arguments, regardless of the
constructor used.
Result:
It is no longer possible to create a FixedChannelPool instance with invalid
maxConnections or maxPendingAcquires parameters.
Motivation:
FixedChannelPool should enforce a number of maximal used channels, but due a bug we fail to correctly enforce this.
Modifications:
Change check to correctly only acquire channel if we not hit the limit yet.
Result:
Correct limiting.
Motivation:
To avoid buffering too much it would be useful to get an estimate of how many bytes can be written to a Channel before it becomes unwritable.
Modifications:
- Update the Channel interface to support 2 new methods. 1 to give how many bytes before unwritable. 1 to give how many bytes before writable.
- Update the AbstractChannel implementation to delegate to the ChannelOutboundBuffer.
Result:
The Channel interface supports 2 new methods which provide more visibility into writability.
Motivation:
It's useful to be able to be notified once all Channels that are part of the ChannelGroup are notified. This can for example be useful if you want to do a graceful shutdown.
Modifications:
- Add ChannelGroup.newCloseFuture(...) which will be notified once all Channels are notified that are part of the ChannelGroup at the time of calling.
Result:
Easier to be notified once all Channels within a ChannelGroup are closed.
Motiviation:
There are currently no accessors which provide visbility into how many bytes must be written in order for a writability change to occur. This feature would be useful for codecs which intent to control how many bytes are queued at any given time.
Modifications:
- add bytesBeforeUnWritable() which will give the number of bytes before the buffer (and associated channel) transitions to not writable
- add bytesBeforeWritable() which will give the number of bytes that must be drained from the queue until the channel becomes writable.
Result:
More visibility into writability for the ChannelOutboundBuffer.
Motivation:
the ByteBuffer[] that we keep in the ThreadLocal are never nulled out which can lead to have ByteBuffer instances sit there forever.
This is even a bigger problem if nioBuffer() of ByteBuffer returns a new ByteBuffer that can not be destroyed by ByteBuffer.release().
Modifications:
Null out ByteBuffer array after processing.
Result:
No more dangling references after done.
Motivation:
SingleThreadEventLoopTest.testScheduleTaskAtFixedRate() fails often due to:
- too little tolerance
- incorrect assertion (it compares only with the previous timestamp)
Modifications:
- Increase the timestamp difference tolerance from 10ms to 20ms
- Improve the timestamp assertion so that the comparison is performed against the first recorded timestamp
- Misc: Fix broken Javadoc tag
Result:
More build stability
Motivation:
When trying to write more then Integer.MAX_VALUE / SSIZE_MAX via writev(...) the OS may return EINVAL depending on the kernel or the actual OS (bsd / osx always return EINVAL). This will trigger an IOException.
Modifications:
Never try to write more then Integer.MAX_VALUE / SSIZE_MAX when using writev.
Result:
No more IOException when write more data then Integer.MAX_VALUE / SSIZE_MAX via writev.
Motivation:
In the SslHandler we schedule a timeout at which we close the Channel if a timeout was detected during close_notify. Because this can race with notify the flushFuture we can see an IllegalStateException when the Channel is closed.
Modifications:
- Use a trySuccess() and tryFailure(...) to guard against race.
Result:
No more race.
Motivation:
We should not trigger channelWritabilityChanged during failing message when we are about to close the Channel as otherwise the use may try again writing even if the Channel is about to get closed.
Modifications:
Add new boolean param to ChannelOutboundBuffer.failFlushed(...) which allows to specify if we should notify or not.
Result:
channelWritabilityChanged is not triggered anymore if we cloe the Channel because of an IOException during write.
Motivation:
Previously, we deferred the closing of the Channel when we were flushing. This is problematic as this means that if the user adds a ChannelFutureListener, that will close the Channel, the closing will not happen until we are done with flushing. This can lead to more data is sent than expected.
Modifications:
- Do not defer closing when in flush
Result:
Correctly respect order of events and closing the Channel ASAP
Motivation:
The semantic of LocalChannel.doWrite(...) were a bit off as it notified the ChannelFuture before the data was actual moved to the peer buffer.
Modifications:
- Use our MPSC queue as inbound buffer
- Directly copy to data to the inbound buffer of the peer and either success or fail the promise after each copy.
Result:
Correct semantic and less memory copies.
Motiviation:
If user events or excpetions reach the tail end of the pipeline they are not released. This could result in buffer leaks.
Motivation:
- Use the ReferenceCountUtil.release to release objects for the userEventTriggered and exceptionCaught methods on DefaultChannelPipeline
Result:
2 less areas where buffer leaks can occur.
Motivation:
There are various known issues in netty-codec-dns:
- Message types are not interfaces, which can make it difficult for a
user to implement his/her own message implementation.
- Some class names and field names do not match with the terms in the
RFC.
- The support for decoding a DNS record was limited. A user had to
encode and decode by him/herself.
- The separation of DnsHeader from DnsMessage was unnecessary, although
it is fine conceptually.
- Buffer leak caused by DnsMessage was difficult to analyze, because the
leak detector tracks down the underlying ByteBuf rather than the
DnsMessage itself.
- DnsMessage assumes DNS-over-UDP.
- To send an EDNS message, a user have to create a new DNS record class
instance unnecessarily.
Modifications:
- Make all message types interfaces and add default implementations
- Rename some classes, properties, and constants to match the RFCs
- DnsResource -> DnsRecord
- DnsType -> DnsRecordType
- and many more
- Remove DnsClass and use an integer to support EDNS better
- Add DnsRecordEncoder/DnsRecordDecoder and their default
implementations
- DnsRecord does not require RDATA to be ByteBuf anymore.
- Add DnsRawRecord as the catch-all record type
- Merge DnsHeader into DnsMessage
- Make ResourceLeakDetector track AbstractDnsMessage
- Remove DnsMessage.sender/recipient properties
- Wrap DnsMessage with AddressedEnvelope
- Add DatagramDnsQuest and DatagramDnsResponse for ease of use
- Rename DnsQueryEncoder to DatagramDnsQueryEncoder
- Rename DnsResponseDecoder to DatagramDnsResponseDecoder
- Miscellaneous changes
- Add StringUtil.TAB
Result:
- Cleaner APi
- Can support DNS-over-TCP more easily in the future
- Reduced memory footprint in the default DnsQuery/Response
implementations
- Better leak tracking for DnsMessages
- Possibility to introduce new DnsRecord types in the future and provide
full record encoder/decoder implementation.
- No unnecessary instantiation for an EDNS pseudo resource record
Motivation:
Many projects need some kind a Channel/Connection pool implementation. While the protocols are different many things can be shared, so we should provide a generic API and implementation.
Modifications:
Add ChannelPool / ChannelPoolMap API and implementations.
Result:
Reusable / Generic pool implementation that users can use.
Motivation:
Because of a bug we missed to fail the connect future when doClose() is called. This can lead to a future which is never notified and so may lead to deadlocks in user-programs.
Modifications:
Correctly fail the connect future when doClose() is called and the connection was not established yet.
Result:
Connect future is always notified.
Motivation:
Each different *ChannelOption did extend ChannelOption in 4.0, which we changed in 4.1. This is a breaking change in terms of the API so we need to ensure we keep the old hierarchy.
Modifications:
- Let all *ChannelOption extend ChannelOption
- Add back constructor and mark it as @deprecated
Result:
No API breakage between 4.0 and 4.1
Related: #3464
Motivation:
When a connection attempt is failed,
NioSocketChannelUnsafe.closeExecutor() triggers a SocketException,
suppressing the channelUnregistered() event.
Modification:
Do not attempt to get SO_LINGER value when a socket is not open yet.
Result:
One less bug
Motivation:
At the moment when EmbeddedChannel is used and a ChannelHandler tries to schedule and task it will throw an UnsupportedOperationException. This makes it impossible to test these handlers or even reuse them with EmbeddedChannel.
Modifications:
- Factor out reusable scheduling code into AbstractSchedulingEventExecutor
- Let EmbeddedEventLoop and SingleThreadEventExecutor extend AbstractSchedulingEventExecutor
- add EmbbededChannel.runScheduledPendingTasks() which allows to run all scheduled tasks that are ready
Result:
Embeddedchannel is now usable even with ChannelHandler that try to schedule tasks.
Motivation:
We should allow to get a ChannelOption/AttributeKey from a String. This will make it a lot easier to make use of configuration files in applications.
Modifications:
- Add exists(...), newInstance(...) method to ChannelOption and AttributeKey and alter valueOf(...) to return an existing instance for a String or create one.
- Add unit tests.
Result:
Much more flexible usage of ChannelOption and AttributeKey.
Motivation:
As we plan to have other native transports soon (like a kqueue transport) we should move unix classes/interfaces out of the epoll package so we
introduce other implementations without breaking stuff before the next stable release.
Modifications:
Create a new io.netty.channel.unix package and move stuff over there.
Result:
Possible to introduce other native impls beside epoll.
Motivation:
If SO_LINGER is used shutdownOutput() and close() syscalls will block until either all data was send or until the timeout exceed. This is a problem when we try to execute them on the EventLoop as this means the EventLoop may be blocked and so can not process any other I/O.
Modifications:
- Add AbstractUnsafe.closeExecutor() which returns null by default and use this Executor for close if not null.
- Override the closeExecutor() in NioSocketChannel and EpollSocketChannel and return GlobalEventExecutor.INSTANCE if getSoLinger() > 0
- use closeExecutor() in shutdownInput(...) in NioSocketChannel and EpollSocketChannel
Result:
No more blocking of the EventLoop if SO_LINGER is used and shutdownOutput() or close() is called.
Motivation:
isRoot() is an expensive operation. We should avoid calling it if
possible.
Modifications:
Move the isRoot() checks to the end of the 'if' block, so that isRoot()
is evaluated only when really necessary.
Result:
isRoot() is evaluated only when SO_BROADCAST is set and the bind address
is anylocal address.
Related:
- 27a25e29f7
Motivation:
The commit mentioned above introduced a regression where
channelReadComplete() event is swallowed by a handler which was added
dynamically.
Modifications:
Do not suppress channelReadComplete() if the current handler's
channelRead() method was not invoked at all, so that a just-added
handler does not suppress channelReadComplete().
Result:
Regression is gone, and channelReadComplete() is invoked when necessary.
Motivation:
Even if a handler called ctx.fireChannelReadComplete(), the next handler
should not get its channelReadComplete() invoked if fireChannelRead()
was not invoked before.
Modifications:
- Ensure channelReadComplete() is invoked only when the handler of the
current context actually produced a message, because otherwise there's
no point of triggering channelReadComplete().
i.e. channelReadComplete() must follow channelRead().
- Fix a bug where ctx.read() was not called if the handler of the
current context did not produce any message, making the connection
stall. Read the new comment for more information.
Result:
- channelReadComplete() is invoked only when it makes sense.
- No stale connection
Motivation:
Because of a re-entrance bug in PendingWriteQueue it was possible to get the queue corrupted and also trigger an IllegalStateException caused by multiple recycling of the internal PendingWrite objects.
Modifications:
- Correctly guard against re-entrance
Result:
No more IllegalStateException possible
Motiviation:
When using domain sockets on linux it is supported to recv and send file descriptors. This can be used to pass around for example sockets.
Modifications:
- Add support for recv and send file descriptors when using EpollDomainSocketChannel.
- Allow to obtain the file descriptor for an Epoll*Channel so it can be send via domain sockets.
Result:
recv and send of file descriptors is supported now.
Motivation:
As the ByteBuf is not set to null after release it we may try to release it again in handleReadException()
Modifications:
- set ByteBuf to null to avoid another byteBuf.release() to be called in handleReadException()
Result:
No IllegalReferenceCountException anymore
Motivation:
Fix a minor documentation bug in
ChannelHandlerContext#fireChannelReadComplete.
Modifications:
ChannelHandlerContext#fireChannelReadComplete no longer references an
incorrect method in its javadoc.
Results:
Documentation is correct.
Motivation:
We only provided a constructor in DefaultFileRegion that takes a FileChannel which means the File itself needs to get opened on construction. This has the problem that if you want to write a lot of Files very fast you may end up with may open FD's even if they are not needed yet. This can lead to hit the open FD limit of the OS.
Modifications:
Add a new constructor to DefaultFileRegion which allows to construct it from a File. The FileChannel will only be obtained when transferTo(...) is called or the DefaultFileRegion is explicit open'ed via open() (this is needed for the native epoll transport)
Result:
Less resource usage when writing a lot of DefaultFileRegion.
Related: #3212
Motivation:
When SslHandler and ChunkedWriteHandler exists in a pipeline together,
it is possible that ChunkedWriteHandler.channelWritabilityChanged()
invokes SslHandler.flush() and vice versa. Because they can feed each
other (i.e. ChunkedWriteHandler.channelWritabilityChanged() ->
SslHandler.flush() -> ChunkedWriteHandler.channelWritabilityChanged() ->
..), they can fall into an inconsistent state due to reentrance (e.g.
bad MAC record at the remote peer due to incorrect ordering.)
Modifications:
- Trigger channelWritabilityChanged() using EventLoop.execute() when
there's a chance where channelWritabilityChanged() can cause a
reentrance issue
- Fix test failures caused by the modification
Result:
Fix the handler reentrance issues related with a
channelWritabilityChanged() event
Related: #3212
Motivation:
PendingWriteQueue.recycle() updates its data structure after triggering
a channelWritabilityChanged() event. It causes a rare corruption such as
double free when channelWritabilityChanged() method accesses the
PendingWriteQueue.
Modifications:
Update the state of PendingWriteQueue before triggering an event.
Result:
Fix a rare double-free problem
Related: #3190
Motivation:
When an outbound handler method raises an exception, its promise is
marked as failed. If the promise is done already, the exception is
logged.
When the promise is void, exceptionCaught() must be triggered to notify
a user. However, ChannelHandlerInvokerUtil simply swallows it.
Modifications:
Do not swallow an exception when the promise is void.
Result:
A user who uses a void promise for an outbound operation will be
notified on failure.
Related: #3189
Motivation:
OIO transport implementations block for at most 1 second to wait for
additional messages (or accepted connections).
However, because AbstractOioMessageChannel defers the channelRead()
events for the messages read so far until there's nothing to read up to
maxMessagesPerRead, any read operation will be followed by a 1-second
delay.
Modifications:
Fire channelRead() events as soon as doRead() returns so that there is
no 1 second delay between the actual read and the channelRead() event.
Result:
No more weird 1-second delay
Related: #3156
Motivation:
Let's say we have a channel with the following pipeline configuration:
HEAD --> [E1] H1 --> [E2] H2 --> TAIL
when the channel is deregistered, the channelUnregistered() methods of
H1 and H2 will be invoked from the executor thread of E1 and E2
respectively. To ensure that the channelUnregistered() methods are
invoked from the correct thread, new one-time tasks will be created
accordingly and be scheduled via Executor.execute(Runnable).
As soon as the one-time tasks are scheduled,
DefaultChannelPipeline.fireChannelUnregistered() will start to remove
all handlers from the pipeline via teardownAll(). This process is
performed in reversed order of event propagation. i.e. H2 is removed
first, and then H1 is removed.
If the channelUnregistered() event has been passed to H2 before H2 is
removed, a user does not see any problem.
If H2 has been removed before channelUnregistered() event is passed to
H2, a user will often see the following confusing warning message:
An exceptionCaught() event was fired, and it reached at the tail of
the pipeline. It usually means the last handler in the pipeline did
not handle the exception.
Modifications:
To ensure that the handlers are removed *after* all events are
propagated, traverse the pipeline in ascending order before performing
the actual removal.
Result:
A user does not get the confusing warning message anymore.
Motivation:
AbstractUnsafe considers two possibilities during channel registration. First,
the channel may be an outgoing connection, in which case it will be registered
before becoming active. Second, the channel may be an incoming connection in,
which case the channel will already be active when it is registered. To handle
the second case, AbstractUnsafe checks if the channel is active after
registration and calls ChannelPipeline.fireChannelActive() if so. However, if
an active channel is deregistered and then re-registered this logic causes a
second fireChannelActive() to be invoked. This is unexpected; it is reasonable
for handlers to assume that this method will only be invoked once per channel.
Modifications:
This change introduces a flag into AbstractUnsafe to recognize if this is the
first or a subsequent registration. ChannelPipeline.fireChannelActive() is only
possible for the first registration.
Result:
ChannelPipeline.fireChannelActive() is only called once.
Motivation:
Found performance issues via FindBugs and PMD.
Modifications:
- Removed unnecessary boxing/unboxing operations in DefaultTextHeaders.convertToInt(CharSequence) and DefaultTextHeaders.convertToLong(CharSequence). A boxed primitive is created from a string, just to extract the unboxed primitive value.
- Added a static modifier for DefaultHttp2Connection.ParentChangedEvent class. This class is an inner class, but does not use its embedded reference to the object which created it. This reference makes the instances of the class larger, and may keep the reference to the creator object alive longer than necessary.
- Added a static compiled Pattern to avoid compile it each time it is used when we need to replace some part of authority.
- Improved using of StringBuilders.
Result:
Performance improvements.
Motivation:
ChannelPromiseAggregator and ChannelPromiseNotifiers only allow
consumers to work with Channels as the result type. Generic versions
of these classes allow consumers to aggregate or broadcast the results
of an asynchronous execution with other result types.
Modifications:
Add PromiseAggregator and PromiseNotifier. Add unit tests for both.
Remove code in ChannelPromiseAggregator and ChannelPromiseNotifier and
modify them to extend the new base classes.
Result:
Consumers can now aggregate or broadcast the results of an asynchronous
execution with results types other than Channel.
Related: #2945
Motivation:
Some special handlers such as TrafficShapingHandler need to override the
writability of a Channel to throttle the outbound traffic.
Modifications:
Add a new indexed property called 'user-defined writability flag' to
ChannelOutboundBuffer so that a handler can override the writability of
a Channel easily.
Result:
A handler can override the writability of a Channel using an unsafe API.
For example:
Channel ch = ...;
ch.unsafe().outboundBuffer().setUserDefinedWritability(1, false);
Related: #2034
Motivation:
Some users want to mock Bootstrap (or ServerBootstrap), and thus they
should not be final but be fully overridable and extensible.
Modifications:
Remove finals wherever possible
Result:
@daschl is happy.
Related: #2964
Motivation:
Writing a zero-length FileRegion to an NIO channel will lead to an
infinite loop.
Modification:
- Do not write a zero-length FileRegion by protecting with proper 'if'.
- Update the testsuite
Result:
Another bug fixed
Motivation:
So far, we relied on the domain name resolution mechanism provided by
JDK. It served its purpose very well, but had the following
shortcomings:
- Domain name resolution is performed in a blocking manner.
This becomes a problem when a user has to connect to thousands of
different hosts. e.g. web crawlers
- It is impossible to employ an alternative cache/retry policy.
e.g. lower/upper bound in TTL, round-robin
- It is impossible to employ an alternative name resolution mechanism.
e.g. Zookeeper-based name resolver
Modification:
- Add the resolver API in the new module: netty-resolver
- Implement the DNS-based resolver: netty-resolver-dns
.. which uses netty-codec-dns
- Make ChannelFactory reusable because it's now used by
io.netty.bootstrap, io.netty.resolver.dns, and potentially by other
modules in the future
- Move ChannelFactory from io.netty.bootstrap to io.netty.channel
- Deprecate the old ChannelFactory
- Add ReflectiveChannelFactory
Result:
It is trivial to resolve a large number of domain names asynchronously.
Motivation:
When a datagram packet is sent to a destination where nobody actually listens to,
the server O/S will respond with an ICMP Port Unreachable packet.
The ICMP Port Unreachable packet is translated into PortUnreachableException by JDK.
PortUnreachableException is not a harmful exception that prevents a user from sending a datagram.
Therefore, we should not close a datagram channel when PortUnreachableException is caught.
Modifications:
- Do not close a channel when the caught exception is PortUnreachableException.
Result:
A datagram channel is not closed unexpectedly anymore.
Motivation:
JDK's exception messages triggered by a connection attempt failure do
not contain the related remote address in its message. We currently
append the remote address to ConnectException's message, but I found
that we need to cover more exception types such as SocketException.
Modifications:
- Add AbstractUnsafe.annotateConnectException() to de-duplicate the
code that appends the remote address
Result:
- Less duplication
- A transport implementor can annotate connection attempt failure
message more easily
Motivation:
There's no way to generate the name of a handler being newly added
automatically and reliably.
For example, let's say you have a routine that adds a set of handlers to
a pipeline using addBefore() or addAfter(). Because addBefore() and
addAfter() always require non-conflicting non-null handler name, making
the multiple invocation of the routine on the same pipeline is
non-trivial.
Modifications:
- If a user specifies null as the name of the new handler,
DefaultChannelPipeline generates one.
- Update the documentation of ChannelPipeline to match the new behavior
Result:
A user doesn't need to worry about name conflicts anymore.
Motiviation:
Before this change, autoRead was a volatile boolean accessed directly. Any thread that invoked the DefaultChannelConfig#setAutoRead(boolean) method would read the current value of autoRead, and then set a new value. If the old value did not match the new value, some action would be immediately taken as part of the same method call.
As volatile only provides happens-before consistency, there was no guarantee that the calling thread was actually the thread mutating the state of the autoRead variable (such that it should be the one to invoke the follow-up actions). For example, with 3 threads:
* Thread 1: get = false
* Thread 1: set = true
* Thread 1: invokes read()
* Thread 2: get = true
* Thread 3: get = true
* Thread 2: set = false
* Thread 2: invokes autoReadCleared()
* Event Loop receives notification from the Selector that data is available, but as autoRead has been cleared, cancels the operation and removes read interest
* Thread 3: set = true
This results in a livelock - autoRead is set true, but no reads will happen even if data is available (as readyOps). The only way around this livelock currently is to set autoRead to false, and then back to true.
Modifications:
Write access to the autoRead variable is now made using the getAndSet() method of an AtomicIntegerFieldUpdater, AUTOREAD_UPDATER. This also changed the type of the underlying autoRead variable to be an integer, as no AtomicBooleanFieldUpdater class exists. Boolean logic is retained by assuming that 1 is true and 0 is false.
Result:
There is no longer a race condition between retrieving the old value of the autoRead variable and setting a new value.
Motivation:
We used the wrong EventExecutor to notify for bind failures if a late registration was done.
Modifications:
Use the correct EventExecutor to notify and only use the GlobelEventExecutor if the registration fails itself.
Result:
The correct Thread will do the notification.
When a ChannelOutboundBuffer contains ByteBufs followed by a FileRegion,
removeBytes() will fail with a ClassCastException. It should break the
loop instead.
f31c630c8c was causing
SocketGatheringWriteTest to fail because it does not take the case where
an empty buffer exists in a gathering write.
When there is an empty buffer in a gathering write, the number of
buffers returned by ChannelOutboundBuffer.nioBuffer() and the actual
number of write attemps can differ.
To remove the write requests correctly, a byte transport must use
ChannelOutboundBuffer.removeBytes()
Motivation:
Because of an incorrect logic in teh EmbeddedChannel constructor it is not possible to use EmbeddedChannel with a ChannelInitializer as constructor argument. This is because it adds the internal LastInboundHandler to its ChannelPipeline before it register itself to the EventLoop.
Modifications:
First register self to EventLoop before add LastInboundHandler to the ChannelPipeline.
Result:
It's now possible to use EmbeddedChannel with ChannelInitializer.
Motivation:
Due a regression NioSocketChannel.doWrite(...) will throw a ClassCastException if you do something like:
channel.write(bytebuf);
channel.write(fileregion);
channel.flush();
Modifications:
Correctly handle writing of different message types by using the correct message count while loop over them.
Result:
No more ClassCastException
Motivation:
The previous fix did disable the caching of ByteBuffers completely which can cause performance regressions. This fix makes sure we use nioBuffers() for all writes in NioSocketChannel and so prevent data-corruptions. This is still kind of a workaround which will be replaced by a more fundamental fix later.
Modifications:
- Revert 4059c9f354
- Use nioBuffers() for all writes to prevent data-corruption
Result:
No more data-corruption but still retain the original speed.
Motivation:
At the moment we expand the ByteBuffer[] when we have more then 1024 ByteBuffer to write and replace the stored instance in its FastThreadLocal. This is not needed and may even harm performance on linux as IOV_MAX is 1024 and so this may cause the JVM to do an array copy.
Modifications:
Just exit the nioBuffers() method if we can not fit more ByteBuffer in the array. This way we will pick them up on the next call.
Result:
Remove uncessary array copy and simplify the code.
Motivation:
We cache the ByteBuffers in ChannelOutboundBuffer.nioBuffers() for the Entries in the ChannelOutboundBuffer to reduce some overhead. The problem is this can lead to data-corruption if an incomplete write happens and next time we try to do a non-gathering write.
To fix this we should remove the caching which does not help a lot anyway and just make the code buggy.
Modifications:
Remove the caching of ByteBuffers.
Result:
No more data-corruption.
Motivation:
At the moment it's only possible for a user to set the RecvByteBufAllocator for a Channel but not access the Handle once it is assigned. This makes it hard to write more flexible implementations.
Modifications:
Add a new method to the Channel.Unsafe to allow access the the used Handle for the Channel. The RecvByteBufAllocator.Handle is created lazily.
Result:
It's possible to write more flexible implementatons that allow to adjust stuff on the fly for a Handle that is used by a Channel
Motivation:
Sometimes ChannelHandler need to queue writes to some point and then process these. We currently have no datastructure for this so the user will use an Queue or something like this. The problem is with this Channel.isWritable() will not work as expected and so the user risk to write to fast. That's exactly what happened in our SslHandler. For this purpose we need to add a special datastructure which will also take care of update the Channel and so be sure that Channel.isWritable() works as expected.
Modifications:
- Add PendingWriteQueue which can be used for this purpose
- Make use of PendingWriteQueue in SslHandler
Result:
It is now possible to queue writes in a ChannelHandler and still have Channel.isWritable() working as expected. This also fixes#2752.
Motivation:
We did various changes related to the ChannelOutboundBuffer in 4.0 branch. This commit port all of them over and so make sure our branches are synced in terms of these changes.
Related to [#2734], [#2709], [#2729], [#2710] and [#2693] .
Modification:
Port all changes that was done on the ChannelOutboundBuffer.
This includes the port of the following commits:
- 73dfd7c01b
- 997d8c32d2
- e282e504f1
- 5e5d1a58fd
- 8ee3575e72
- d6f0d12a86
- 16e50765d1
- 3f3e66c31a
Result:
- Less memory usage by ChannelOutboundBuffer
- Same code as in 4.0 branch
- Make it possible to use ChannelOutboundBuffer with Channel implementation that not extends AbstractChannel
Motivation:
The PID_MAX_LIMIT on 64bit linux systems is 4194304 and on osx it is 99998. At the moment we use 65535 as an upper-limit which is too small.
Modifications:
Use 4194304 as max possible value
Result:
No more false-positives when try to detect current pid.
Motivation:
We have some inconsistency when handling writes. Sometimes we call ChannelOutboundBuffer.progress(...) also for complete writes and sometimes not. We should call it always.
Modifications:
Correctly call ChannelOuboundBuffer.progress(...) for complete and incomplete writes.
Result:
Consistent behavior
Motivation:
While benchmarking the native transport with gathering writes I noticed that it is quite slow. This is due the fact that we need to do a lot of array copies to get the buffers into the iov array.
Modification:
Introduce a new class calles IovArray which allows to fill buffers directly in a iov array that can be passed over to JNI without any array copies. This gives a nice optimization in terms of speed when doing gathering writes.
Result:
Big performance improvement when doing gathering writes. See the included benchmark...
Before:
[nmaurer@xxx]~% wrk/wrk -H 'Host: localhost' -H 'Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8' -H 'Connection: keep-alive' -d 120 -c 256 -t 16 --pipeline 256 http://xxx:8080/plaintext
Running 2m test @ http://xxx:8080/plaintext
16 threads and 256 connections
Thread Stats Avg Stdev Max +/- Stdev
Latency 23.44ms 16.37ms 259.57ms 91.77%
Req/Sec 181.99k 31.69k 304.60k 78.12%
346544071 requests in 2.00m, 46.48GB read
Requests/sec: 2887885.09
Transfer/sec: 396.59MB
With this change:
[nmaurer@xxx]~% wrk/wrk -H 'Host: localhost' -H 'Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8' -H 'Connection: keep-alive' -d 120 -c 256 -t 16 --pipeline 256 http://xxx:8080/plaintext
Running 2m test @ http://xxx:8080/plaintext
16 threads and 256 connections
Thread Stats Avg Stdev Max +/- Stdev
Latency 21.93ms 16.33ms 305.73ms 92.34%
Req/Sec 194.56k 33.75k 309.33k 77.04%
369617503 requests in 2.00m, 49.57GB read
Requests/sec: 3080169.65
Transfer/sec: 423.00MB
Motivation:
ChannelOutboundBuffer is basically a circular array queue of its entry
objects. Once an entry is created in the array, it is never nulled out
to reduce the allocation cost.
However, because it is a circular queue, the array almost always ends up
with as many entry instances as the size of the array, regardless of the
number of pending writes.
At worst case, a channel might have only 1 pending writes at maximum
while creating 32 entry objects, where 32 is the initial capacity of the
array.
Modifications:
- Reduce the initial capacity of the circular array queue to 4.
- Make the initial capacity of the circular array queue configurable
Result:
We spend 4 times less memory for entry objects under certain
circumstances.
Motivation:
At the moment NioSocketChannelOutboundBuffer.nioBuffers() / EpollSocketChannelOutboundBuffer.memoryAddresses() returns null if something is contained in the ChannelOutboundBuffer which is not a ByteBuf. This is a problem for two reasons:
1 - In the javadocs we state that it will never return null
2 - We may do a not optimal write as there may be things that could be written via gathering writes
Modifications:
Change NioSocketChannelOutboundBuffer.nioBuffers() / EpollSocketChannelOutboundBuffer.memoryAddresses() to never return null but have it contain all ByteBuffer that were found before the non ByteBuf. This way we can do a gathering write and also conform to the javadocs.
Result:
Better speed and also correct implementation in terms of the api.
Motivation:
Now Netty has a few problems with null values.
Modifications:
- Check HAProxyProxiedProtocol in HAProxyMessage constructor and throw NPE if it is null.
If HAProxyProxiedProtocol is null we will set AddressFamily as null. So we will get NPE inside checkAddress(String, AddressFamily) and it won't be easy to understand why addrFamily is null.
- Check File in DiskFileUpload.toString().
If File is null we will get NPE when calling toString() method.
- Check Result<String> in MqttDecoder.decodeConnectionPayload(...).
If !mqttConnectVariableHeader.isWillFlag() || !mqttConnectVariableHeader.hasUserName() || !mqttConnectVariableHeader.hasPassword() we will get NPE when we will try to create new instance of MqttConnectPayload.
- Check Unsafe before calling unsafe.getClass() in PlatformDependent0 static block.
- Removed unnecessary null check in WebSocket08FrameEncoder.encode(...).
Because msg.content() can not return null.
- Removed unnecessary null check in DefaultStompFrame(StompCommand) constructor.
Because we have this check in the super class.
- Removed unnecessary null checks in ConcurrentHashMapV8.removeTreeNode(TreeNode<K,V>).
- Removed unnecessary null check in OioDatagramChannel.doReadMessages(List<Object>).
Because tmpPacket.getSocketAddress() always returns new SocketAddress instance.
- Removed unnecessary null check in OioServerSocketChannel.doReadMessages(List<Object>).
Because socket.accept() always returns new Socket instance.
- Pass Unpooled.buffer(0) instead of null inside CloseWebSocketFrame(boolean, int) constructor.
If we will pass null we will get NPE in super class constructor.
- Added throw new IllegalStateException in GlobalEventExecutor.awaitInactivity(long, TimeUnit) if it will be called before GlobalEventExecutor.execute(Runnable).
Because now we will get NPE. IllegalStateException will be better in this case.
- Fixed null check in OpenSslServerContext.setTicketKeys(byte[]).
Now we throw new NPE if byte[] is not null.
Result:
Added new null checks when it is necessary, removed unnecessary null checks and fixed some NPE problems.
Motivation:
Fix some typos in Netty.
Modifications:
- Fix potentially dangerous use of non-short-circuit logic in Recycler.transfer(Stack<?>).
- Removed double 'the the' in javadoc of EmbeddedChannel.
- Write to log an exception message if we can not get SOMAXCONN in the NetUtil's static block.
Motivation:
As a DatagramChannel supports to write to multiple remote peers we must not close the Channel once a IOException accours as this error may be only valid for one remote peer.
Modification:
Continue writing on IOException.
Result:
DatagramChannel can be used even after an IOException accours during writing.
Motivation:
Because of a missing return statement we may produce a NPE when try to fullfill the connect ChannelPromise when it was fullfilled before.
Modification:
Add missing return statement.
Result:
No more NPE.
Motivation:
When system is in short of entrophy, the initialization of
ThreadLocalRandom can take at most 3 seconds. The initialization occurs
when ThreadLocalRandom.current() is invoked first time, which might be
much later than the moment when the application has started. If we
start the initialization of ThreadLocalRandom as early as possible, we
can reduce the perceived time taken for the retrieval.
Modification:
Begin the initialization of ThreadLocalRandom in InternalLoggerFactory,
potentially one of the firstly initialized class in a Netty application.
Make DefaultChannelId retrieve the current process ID before retrieving
the current machine ID, because retrieval of a machine ID is more likely
to use ThreadLocalRandom.current().
Use a dummy channel ID for EmbeddedChannel, which prevents many unit
tests from creating a ThreadLocalRandom instance.
Result:
We gain extra 100ms at minimum for initialSeedUniquifier generation. If
an application has its own initialization that takes long enough time
and generates good amount of entrophy, it is very likely that we will
gain a lot more.
Motivation:
When a bind fails AbstractBootstrap will use the GlobalEventExecutor to notify the ChannelPromise. We should use the EventLoop of the Channel if possible.
Modification:
Use EventLoop of the Channel if possible to use the correct Thread to notify and so guaranteer the right order of events.
Result:
Use the correct EventLoop for notification
Motivation:
There is no way for a ChannelHandler to check if the passed in ChannelPromise for a write(...) call is a VoidChannelPromise. This is a problem as some handlers need to add listeners to the ChannelPromise which is not possible in the case of a VoidChannelPromise.
Modification:
- Introduce ChannelFuture.isVoid() which will return true if it is not possible to add listeners or wait on the result.
- Add ChannelPromise.unvoid() which allows to create a ChannelFuture out of a void ChannelFuture which supports all the operations.
Result:
It's now easy to write ChannelHandler implementations which also works when a void ChannelPromise is used.
Motivation:
We use the nanoTime of the scheduledTasks to calculate the milli-seconds to wait for a select operation to select something. Once these elapsed we check if there was something selected or some task is ready for processing. Unfortunally we not take into account scheduled tasks here so the selection loop will continue if only scheduled tasks are ready for processing. This will delay the execution of these tasks.
Modification:
- Check if a scheduled task is ready after selecting
- also make a tiny change in NioEventLoop to not trigger a rebuild if nothing was selected because the timeout was reached a few times in a row.
Result:
Execute scheduled tasks on time.
Motivation:
When a select rebuild was triggered the reference to the SelectionKey is not updated in AbstractNioChannel. This will cause a CancelledKeyException later.
Modification:
Correctly update SelectionKey reference after rebuild
Result:
Fix exception
Motivation:
Recycler is used in many places to reduce GC-pressure but is still not as fast as possible because of the internal datastructures used.
Modification:
- Rewrite Recycler to use a WeakOrderQueue which makes minimal guaranteer about order and visibility for max performance.
- Recycling of the same object multiple times without acquire it will fail.
- Introduce a RecyclableMpscLinkedQueueNode which can be used for MpscLinkedQueueNodes that use Recycler
These changes are based on @belliottsmith 's work that was part of #2504.
Result:
Huge increase in performance.
4.0 branch without this commit:
Benchmark (size) Mode Samples Score Score error Units
i.n.m.i.RecyclableArrayListBenchmark.recycleSameThread 00000 thrpt 20 116026994.130 2763381.305 ops/s
i.n.m.i.RecyclableArrayListBenchmark.recycleSameThread 00256 thrpt 20 110823170.627 3007221.464 ops/s
i.n.m.i.RecyclableArrayListBenchmark.recycleSameThread 01024 thrpt 20 118290272.413 7143962.304 ops/s
i.n.m.i.RecyclableArrayListBenchmark.recycleSameThread 04096 thrpt 20 120560396.523 6483323.228 ops/s
i.n.m.i.RecyclableArrayListBenchmark.recycleSameThread 16384 thrpt 20 114726607.428 2960013.108 ops/s
i.n.m.i.RecyclableArrayListBenchmark.recycleSameThread 65536 thrpt 20 119385917.899 3172913.684 ops/s
Tests run: 1, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 297.617 sec - in io.netty.microbench.internal.RecyclableArrayListBenchmark
4.0 branch with this commit:
Benchmark (size) Mode Samples Score Score error Units
i.n.m.i.RecyclableArrayListBenchmark.recycleSameThread 00000 thrpt 20 204158855.315 5031432.145 ops/s
i.n.m.i.RecyclableArrayListBenchmark.recycleSameThread 00256 thrpt 20 205179685.861 1934137.841 ops/s
i.n.m.i.RecyclableArrayListBenchmark.recycleSameThread 01024 thrpt 20 209906801.437 8007811.254 ops/s
i.n.m.i.RecyclableArrayListBenchmark.recycleSameThread 04096 thrpt 20 214288320.053 6413126.689 ops/s
i.n.m.i.RecyclableArrayListBenchmark.recycleSameThread 16384 thrpt 20 215940902.649 7837706.133 ops/s
i.n.m.i.RecyclableArrayListBenchmark.recycleSameThread 65536 thrpt 20 211141994.206 5017868.542 ops/s
Tests run: 1, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 297.648 sec - in io.netty.microbench.internal.RecyclableArrayListBenchmark
Motivation:
LocalServerChannel.doClose() calls LocalChannelRegistry.unregister(localAddress); without check if localAddress is null and so produce a NPE when pass null the used ConcurrentHashMapV8
Modification:
Check for localAddress != null before try to remove it from Map. Also added a unit test which showed the stacktrace of the error.
Result:
No more NPE during doClose().
Motivation:
At the moment AbstractBoostrap.bind(...) will always use the GlobalEventExecutor to notify the returned ChannelFuture if the registration is not done yet. This should only be done if the registration fails later. If it completes successful we should just notify with the EventLoop of the Channel.
Modification:
Use EventLoop of the Channel if possible to use the correct Thread to notify and so guaranteer the right order of events.
Result:
Use the correct EventLoop for notification
Motivation:
When Netty runs in a managed environment such as web application server,
Netty needs to provide an explicit way to remove the thread-local
variables it created to prevent class loader leaks.
FastThreadLocal uses different execution paths for storing a
thread-local variable depending on the type of the current thread.
It increases the complexity of thread-local removal.
Modifications:
- Moved FastThreadLocal and FastThreadLocalThread out of the internal
package so that a user can use it.
- FastThreadLocal now keeps track of all thread local variables it has
initialized, and calling FastThreadLocal.removeAll() will remove all
thread-local variables of the caller thread.
- Added FastThreadLocal.size() for diagnostics and tests
- Introduce InternalThreadLocalMap which is a mixture of hard-wired
thread local variable fields and extensible indexed variables
- FastThreadLocal now uses InternalThreadLocalMap to implement a
thread-local variable.
- Added ThreadDeathWatcher.unwatch() so that PooledByteBufAllocator
tells it to stop watching when its thread-local cache has been freed
by FastThreadLocal.removeAll().
- Added FastThreadLocalTest to ensure that removeAll() works
- Added microbenchmark for FastThreadLocal and JDK ThreadLocal
- Upgraded to JMH 0.9
Result:
- A user can remove all thread-local variables Netty created, as long as
he or she did not exit from the current thread. (Note that there's no
way to remove a thread-local variable from outside of the thread.)
- FastThreadLocal exposes more useful operations such as isSet() because
we always implement a thread local variable via InternalThreadLocalMap
instead of falling back to JDK ThreadLocal.
- FastThreadLocalBenchmark shows that this change improves the
performance of FastThreadLocal even more.
Motivation:
The code in ChannelOutboundBuffer can be simplified by using AtomicLongFieldUpdater.addAndGet(...)
Modification:
Replace our manual looping with AtomicLongFieldUpdater.addAndGet(...)
Result:
Cleaner code
Motivation:
If ChannelOutboundBuffer.addFlush() is called multiple times and flushed != unflushed it will still loop through all entries that are not flushed yet even if it is not needed anymore as these were marked uncancellable before.
Modifications:
Check if new messages were added since addFlush() was called and only if this was the case loop through all entries and try to mark the uncancellable.
Result:
Less overhead when ChannelOuboundBuffer.addFlush() is called multiple times without new messages been added.
Motivation:
Provide a faster ThreadLocal implementation
Modification:
Add a "FastThreadLocal" which uses an EnumMap and a predefined fixed set of possible thread locals (all of the static instances created by netty) that is around 10-20% faster than standard ThreadLocal in my benchmarks (and can be seen having an effect in the direct PooledByteBufAllocator benchmark that uses the DEFAULT ByteBufAllocator which uses this FastThreadLocal, as opposed to normal instantiations that do not, and in the new RecyclableArrayList benchmark);
Result:
Improved performance
Motivation:
Each of DefaultChannelPipeline instance creates an head and tail that wraps a handler. These are used to chain together other DefaultChannelHandlerContext that are created once a new ChannelHandler is added. There are a few things here that can be improved in terms of memory usage and initialization time.
Modification:
- Only generate the name for the tail and head one time as it will never change anyway
- Rename DefaultChannelHandlerContext to AbstractChannelHandlerContext and make it abstract
- Create a new DefaultChannelHandlerContext that is used when a ChannelHandler is added to the DefaultChannelPipeline
- Rename TailHandler to TailContext and HeadHandler to HeadContext and let them extend AbstractChannelHandlerContext. This way we can save 2 object creations per DefaultChannelPipeline
Result:
- Less memory usage because we have 2 less objects per DefaultChannelPipeline
- Faster creation of DefaultChannelPipeline as we not need to generate the name for the head and tail
Motivation:
At the moment ChannelFlushPromiseNotifier.add(....) takes an int value for pendingDataSize, which may be too small as a user may need to use a long. This can for example be useful when a user writes a FileRegion etc. Beside this the notify* method names are kind of missleading as these should not contain *Future* because it is about ChannelPromises.
Modification:
Add a new add(...) method that takes a long for pendingDataSize and @deprecated the old method. Beside this also @deprecated all *Future* methods and add methods that have *Promise* in the method name to better reflect usage.
Result:
ChannelFlushPromiseNotifier can be used with bigger data.
Motivation:
The default StringBuilder size is too small (data.length + 4) while it will be 2*data.length (byte to Hex) + 5 "-" char (since 5 peaces appended).
Modification:
Changing initial size to the correct one
Result:
Allocation of the correct final size from the beginning for this StringBuilder.
Motivation:
On some ill-configured systems, InetAddress.getLocalHost() fails. NioSocketChannelTest calls java.net.Socket.connect() and it internally invoked InetAddress.getLocalHost(), which causes the test failures in NioSocketChannelTes on such an ill-configured system.
Modifications:
Use NetUtil.LOCALHOST explicitly.
Result:
NioSocketChannelTest should not fail anymore.
Motivation:
The old DefaultAttributeMap impl did more synchronization then needed and also did not expose a efficient way to check if an attribute exists with a specific key.
Modifications:
* Rewrite DefaultAttributeMap to not use IdentityHashMap and synchronization on the map directly. The new impl uses a combination of AtomicReferenceArray and synchronization per chain (linked-list). Also access the first Attribute per bucket can be done without any synchronization at all and just uses atomic operations. This should fit for most use-cases pretty weel.
* Add hasAttr(...) implementation
Result:
It's now possible to check for the existence of a attribute without create one. Synchronization is per linked-list and the first entry can even be added via atomic operation.
Motivation:
At the moment we sometimes use only RecvByteBufAllocator.guess() to guess the next size and the use the ByteBufAllocator.* directly to allocate the buffer. We should always use RecvByteBufAllocator.allocate(...) all the time as this makes the behavior easier to adjust.
Modifications:
Change the read() implementations to make use of RecvByteBufAllocator.
Result:
Behavior is more consistent.
Motivation:
DefaultChannelPipeline.firstContext() should return null when the ipeline is empty. This is not the case atm.
Modification:
Fix incorrect check in DefaultChannelPipeline.firstContext() and add unit tests.
Result:
Correctly return null when DefaultChannelPipeline.firstContext() is called on empty pipeline.
Motivation:
Because Thread.currentThread().interrupt() will unblock Selector.select() we need to take special care when check if we need to rebuild the Selector. If the unblock was caused by the interrupt() we will clear it and move on as this is most likely a bug in a custom ChannelHandler or a library the user makes use of.
Modification:
Clear the interrupt state of the Thread if the Selector was unblock because of an interrupt and the returned keys was 0.
Result:
No more busy loop caused by Thread.currentThread().interrupt()
Motivation:
At the moment whenever we add/remove a ChannelHandler with an EventExecutorGroup we have two synchronization points in the execution path. One to find the childInvoker and one for add/remove itself. We can eliminate the former by call findIInvoker in the synchronization block, as we need to synchronize anyway.
Modification:
Remove the usage of AtomicFieldUpdater and the extra synchronization in findInvoker by moving the call of the method in the synchronized(this) block.
Result:
Less synchronization points and volatile reads/writes
Motivation:
As discussed in #2250, it will become much less complicated to implement
deregistration and reregistration of a channel once #2250 is resolved.
Therefore, there's no need to deprecate deregister() and
channelUnregistered().
Modification:
- Undeprecate deregister() and channelUnregistered()
- Remove SuppressWarnings annotations where applicable
Result:
We (including @jakobbuchgraber) are now ready to play with #2250 at
master
Motivation:
4 and 5 were diverged long time ago and we recently reverted some of the
early commits in master. We must make sure 4.1 and master are not very
different now.
Modification:
Fix found differences
Result:
4.1 and master got closer.
Motivation:
4 and 5 were diverged long time ago and we recently reverted some of the
early commits in master. We must make sure 4.1 and master are not very
different now.
Modification:
Remove ChannelHandlerInvoker.writeAndFlush(...) and the related
implementations.
Result:
4.1 and master got closer.
Motivation:
4 and 5 were diverged long time ago and we recently reverted some of the
early commits in master. We must make sure 4.1 and master are not very
different now.
Modification:
Remove ChannelHandlerInvoker.writeAndFlush(...) and the related implementations.
Result:
4.1 and master got closer.
Motivation:
4 and 5 were diverged long time ago and we recently reverted some of the
early commits in master. We must make sure 4.1 and master are not very
different now.
Modification:
Small adjustments to match up branches
Result:
4.1 and master got closer.
Motivation:
4 and 5 were diverged long time ago and we recently reverted some of the
early commits in master. We must make sure 4.1 and master are not very
different now.
Modification:
Fix found differences
Result:
4.1 and master got closer.
Motivation:
I had the NioSocketChannelTest.testFlushCloseReentrance() fail sometimes on one of my linux installation. This change let it pass all the time.
Modification:
Set the SO_SNDBUF to a small value to force split writes
Result:
Test is passing all the time where it was sometimes fail before.
Motivation:
At the moment it is not possible to deregister a LocalChannel from its EventLoop and register it to another one as the LocalChannel is closed during the deregister.
Modification:
Not close the LocalChannel during dergister
Result:
It is now possible to deregister a LocalChannel and register it to another EventLoop
Motivation:
Once a user implement a custom ChannelHandlerInvoker it is needed to validate the ChannelPromise. We should expose a utility method for this.
Modifications:
Move validatePromise(...) from DefaultChannelHandlerInvoker to ChannelHandlerInvokerUtil and make it public.
Result:
User is able to reuse code
Motivation:
At the moment it is possible to see a NPE when the LocalSocketChannels doRegister() method is called and the LocalSocketChannels doClose() method is called before the registration was completed.
Modifications:
Make sure we delay the actual close until the registration task was executed.
Result:
No more NPE
Motivation:
At the moment ChanneConfig.setAutoRead(false) only is guaranteer to not have an extra channelRead(...) triggered when used from within the channelRead(...) or channelReadComplete(...) method. This is not the correct behaviour as it should also work from other methods that are triggered from within the EventLoop. For example a valid use case is to have it called from within a ChannelFutureListener, which currently not work as expected.
Beside this there is another bug which is kind of related. Currently Channel.read() will not work as expected for OIO as we will stop try to read even if nothing could be read there after one read operation on the socket (when the SO_TIMEOUT kicks in).
Modifications:
Implement the logic the right way for the NIO/OIO/SCTP and native transport, specific to the transport implementation. Also correctly handle Channel.read() for OIO transport by trigger a new read if SO_TIMEOUT was catched.
Result:
It is now also possible to use ChannelConfig.setAutoRead(false) from other methods that are called from within the EventLoop and have direct effect.
Conflicts:
transport-sctp/src/main/java/io/netty/channel/sctp/nio/NioSctpChannel.java
transport/src/main/java/io/netty/channel/socket/nio/NioDatagramChannel.java
transport/src/main/java/io/netty/channel/socket/nio/NioSocketChannel.java
Motivation:
At the moment we create a HashMap that holds the MembershipKeys for multicast with every NioDatagramChannel even when most people not need it at al
Modifications:
Lazy create the HashMap when needed.
Result:
Less memory usage and less object creation
Motivation:
When using System.getProperty(...) and various methods to get a ClassLoader it will fail when a SecurityManager is in place.
Modifications:
Use a priveled block if needed. This work is based in the PR #2353 done by @anilsaldhana .
Result:
Code works also when SecurityManager is present
Motivation:
Because we not null out the array entry in the SelectionKey[] which is produced by SelectedSelectionKeySet.flip() we may end up with a few SelectionKeyreferences still hanging around here even after the Channel was closed. As these entries may be present at the end of the SelectionKey[] which is never updated for a long time as not enough SelectionKeys are ready.
Modifications:
Once we access the SelectionKey out of the SelectionKey[] we directly null it out.
Result:
Reference can be GC'ed right away once the Channel was closed.
Motivation:
At the moment we do a Channel.isActive() check in every AbstractChannel.AbstractUnsafe.write(...) call which gives quite some overhead as shown in the profiler when you write fast enough. We can eliminate the check and do something more smart here.
Modifications:
Remove the isActive() check and just check if the ChannelOutboundBuffer was set to null before, which means the Channel was closed. The rest will be handled in flush0() anyway.
Result:
Less overhead when doing many write calls
Motivation:
At the moment an IllegalArgumentException will be thrown if a ChannelPromise is cancelled while propagate through the ChannelPipeline. This is not correct, we should just stop to propagate it as it is valid to cancel at any time.
Modifications:
Stop propagate the operation through the ChannelPipeline once a ChannelPromise is cancelled.
Result:
No more IllegalArgumentException when cancel a ChannelPromise while moving through the ChannelPipeline.
Motivation:
While the default thread model provided by Netty is reasonable enough for most applications, some users might have a special requirement for the thread model. Here are a few examples:
- A user might want to invoke handlers from the caller thread directly, assuming that his or her application is completely asynchronous and does not make any invocation from non-I/O thread. In this case, the default invoker implementation will only add the overhead of checking if the current thread is an I/O thread or not.
- A user might want to invoke handlers from different threads depending on the type of events flexibly.
Modifications:
- Backport 132af3a485 which is a fix for #1912
- Add a new interface called 'ChannelHandlerInvoker' that performs the invocation of event handler methods.
- Add pipeline manipulation methods that accept ChannelHandlerInvoker
- The differences from the original commit:
- Separated the irrelevant changes out
- Channel.eventLoop is null until the registration is complete in this branch, so Channel.Unsafe.invoker() doesn't work before registration.
- Deregistration is not gone in this branch, so the methods related with deregistration were added to ChannelHandlerInvoker
Motivation:
MultithreadEventLoopGroup.newChild() does not override MultithreadEventExecutorGroup.newChild() which returns EventExecutor. MultithreadEventLoopGroup.newChild() should never return an EventExecutor, so this is incorrect.
Modifications:
Override MultithreadEventLoopGroup.newChild() so that it returns EventLoop
Result:
Correct API
Motivation:
EventExecutor.iterator() is fixed to return Iterator<EventExecutor> and there's no way to change that as long as we don't extend Iterable. However, a user should have a way to cast the returned set of executors painlessly. Currently, it is only possible with an explicit cast like (Iterator<NioEventLoop>).
Modifications:
Instead, I added a new method called 'children()' which returns an immutable collection of child executors whose method signature looks like the following:
<E extends EventExecutor> Set<E> children();
Result:
A user can now do this:
Set<NioEventLoop> loops = group.children();
for (NioEventLoop l: loops) { ... }
Unfortunately, this is not possible:
for (NioEventLoop l: group.children()) { ... }
However, it's still a gain that a user doesn't need to down-cast explicitly and to add the '@SuppressWarnings` annotation.
Motivation:
LocalEventLoopGroup and LocalEventLoop are not really special for LocalChannels. It can be used for other channel implementations as long as they don't require special handling.
Modifications:
- Add DefaultEventLoopGroup and DefaultEventLoop
- Deprecate LocalEventLoopGroup and make it extend DefaultEventLoopGroup
- Add DefaultEventLoop and remove LocalEventLoop
- Fix inspector warnings
Result:
- Better class names.
Motivation:
EventExecutor.parent() and EventLoop.parent() almost always return a constant parent executor. There's not much reason to let it implemented in subclasses.
Modifications:
- Implement AbstractEventExecutor.parent() with an additional contructor
- Add AbstractEventLoop so that subclasses extend AbstractEventLoop, which implements parent() appropriately
- Remove redundant parent() implementations in the subclasses
- Fix inspector warnings
Result:
Less duplication.
Motivation:
At the moment we use the system-wide default selector provider for this invocation of the Java virtual machine when constructing a new NIO channel, which makes using an alternative SelectorProvider practically useless.
This change allows user specify his/her preferred SelectorProvider.
Modifications:
Add SelectorProvider as a param for current `private static *Channel newSocket` method of NioSocketChannel, NioServerSocketChannel and NioDatagramChannel.
Change default constructors of NioSocketChannel, NioServerSocketChannel and NioDatagramChannel to use DEFAULT_SELECTOR_PROVIDER when calling newSocket(SelectorProvider).
Add new constructors for NioSocketChannel, NioServerSocketChannel and NioDatagramChannel which allow user specify his/her preferred SelectorProvider.
Result:
Now users can specify his/her preferred SelectorProvider when constructing an NIO channel.
Motivation:
Some operating systems like Windows 7 uses a valid globally unique EUI-64 MAC address for a virtual device (e.g. 00:00:00:00:00:00:00:E0), and because it's usually longer than the legit MAC-48 address, we should not use the length of MAC address when two MAC addresses are of the same quality. Instead, we should compare the INET address of the NICs before comparing the length of the MAC addresses.
Modification:
Compare the length of MAC addresses as a last resort.
Result:
Correct MAC address detection in Windows with IPv6 enabled.
Motivation:
When there are two MAC addresses which are good enough, we can choose the one with better IP address rather than just choosing the first appeared one.
Modification:
Replace isBetterAddress() with compareAddresses() to make it return if both addresses are in the same preference level.
Add compareAddresses() which compare InetAddresses and use it when compareAddress(byte[], byte[]) returns 0 (same preference)
Result:
More correct primary MAC address detection
Motivation:
As reported in #2331, some query operations in NetworkInterface takes much longer time than we expected. For example, specifying -Djava.net.preferIPv4Stack=true option in Window increases the execution time by more than 4 times. Some Windows systems have more than 20 network interfaces, and this problem gets bigger as the number of unused (virtual) NICs increases.
Modification:
Use NetworkInterface.getInetAddresses() wherever possible.
Before iterating over all NICs reported by NetworkInterface, filter the NICs without proper InetAddresses. This reduces the number of candidates quite a lot.
NetUtil does not query hardware address of NIC in the first place but uses InetAddress.isLoopbackAddress().
Do not call unnecessary query operations on NetworkInterface. Just get hardware address and compare.
Result:
Significantly reduced class initialization time, which should fix#2331.
Motivation:
Allow the user to create a NioServerSocketChannel from an existing ServerSocketChannel.
Modifications:
Add an extra constructor
Result:
Now the user is be able to create a NioServerSocketChannel from an existing ServerSocketChannel, like he can do with all the other Nio*Channel implemntations.
Motivation:
Ensure the user know the Channel must be closed to release resources like filehandles.
Modifications:
Add some extra javadoc.
Result:
More clear documentation
Motivation:
At the moment we use SocketChannel.open(), ServerSocketChannel.open() and DatagramSocketChannel.open(...) within the constructor of our
NIO channels. This introduces a bottleneck if you create a lot of connections as these calls delegate to SelectorProvider.provider() which
uses synchronized internal. This change removed the bottleneck.
Modifications:
Obtain a static instance of the SelectorProvider and use SelectorProvider.openSocketChannel(), SelectorProvider.openServerSocketChannel() and
SelectorProvider.openDatagramChannel(). This eliminates the bottleneck as SelectorProvider.provider() is not called on every channel creation.
Result:
Less conditions when create new channels.
Motivation:
Remove the synchronization bottleneck and so speed up things
Modifications:
Introduce a ThreadLocal cache that holds mappings between classes of ChannelHandlerAdapater implementations and the result of checking if the @Sharable annotation is present.
This way we only will need to do the real check one time and server the other calls via the cache. A ThreadLocal and WeakHashMap combo is used to implement the cache
as this way we can minimize the conditions while still be sure we not leak class instances in containers.
Result:
Less conditions during adding ChannelHandlerAdapter to the ChannelPipeline
