Motivation:
We should correctly reset the cached local and remote address when a Channel.disconnect() is called and the channel has a notion of disconnect vs close (for example DatagramChannel implementations).
Modifications:
- Correctly reset cached kicak abd remote address
- Update testcase to cover it and so ensure all transports work in a consistent way
Result:
Correctly handle disconnect()
Motivation:
291f80733a introduced a change to use a byte[] to construct the InetAddress when receiving datagram messages to reduce the overhead. Unfortunally it introduced a regression when handling IPv6-mapped-IPv4 addresses and so produced an IndexOutOfBoundsException when trying to fill the byte[] in native code.
Modifications:
- Correctly use the offset on the pointer of the address.
- Add testcase
- Make tests more robust and include more details when the test fails
Result:
No more IndexOutOfBoundsException
Motivation:
When using datagram sockets which need to handle a lot of packets it makes sense to use recvmmsg to be able to read multiple datagram packets with one syscall.
Modifications:
- Add support for recvmmsg on linux
- Add new EpollChannelOption.MAX_DATAGRAM_PACKET_SIZE
- Add tests
Result:
Fixes https://github.com/netty/netty/issues/8446.
Motivation:
We should not only include the java source files but also the c source file in our source jars.
Modifications:
Add files from src/main/c as well
Result:
Fixes https://github.com/netty/netty/issues/9494
Motivation:
On openSUSE (probably more), 64 bit builds use lib64, e.g. /usr/lib64, and
configure picks this up and builds the native library in
native-build/target/lib64 where maven is not looking.
Modifications:
Explicitly specify --libdir=${project.build.directory}/native-build/target/lib
during configuration.
Result:
Maven uses the correct lib directory.
Motivation:
Netty homepage(netty.io) serves both "http" and "https".
It's recommended to use https than http.
Modification:
I changed from "http://netty.io" to "https://netty.io"
Result:
No effects.
Motivation:
Some methods that either override others or are implemented as part of implementation an interface did miss the `@Override` annotation
Modifications:
Add missing `@Override`s
Result:
Code cleanup
Motivation:
c9aaa93d83 added the ability to specify an EventLoopTaskQueueFactory but did place it under MultithreadEventLoopGroup while not really belongs there.
Modifications:
Make EventLoopTaskQueueFactory a top-level interface
Result:
More logical code layout.
Motivation:
Sometimes it is desirable to be able to use a different Queue implementation for the EventLoop of a Channel. This is currently not possible without resort to reflection.
Modifications:
- Add a new constructor to Nio|Epoll|KQueueEventLoopGroup which allows to specify a factory which is used to create the task queue. This was the user can override the default implementation.
- Add test
Result:
Be able to change Queue that is used for the EventLoop.
Motivation:
This resolves a TODO from the initial transport-native-kqueue implementation, supplying the user with the pid of the local peer client/server process.
Modification:
Inside netty_kqueue_bsdsocket_getPeerCredentials, Call getsockopt with LOCAL_PEERPID and pass it to PeerCredentials constructor.
Add a test case in KQueueSocketTest.
Result:
PeerCredentials now have pid field set. Fixes https://github.com/netty/netty/issues/9213
Motivation:
The current KQueueEventLoop implementation does not process concurrent domain socket channel registration/unregistration in the order they actual
happen since unregistration are delated by an event loop task scheduling. When a domain socket is closed, it's file descriptor might be reused
quickly and therefore trigger a new channel registration using the same descriptor.
Consequently the KQueueEventLoop#add(AbstractKQueueChannel) method will overwrite the current inactive channels having the same descriptor
and the delayed KQueueEventLoop#remove(AbstractKQueueChannel) will remove the active channel that replaced the inactive one.
As active channels are registered, events for this file descriptor won't be processed anymore and the channels will never be closed.
The same problem can also happen in EpollEventLoop. Beside this we also may never remove the AbstractEpollChannel from the internal map
when it is unregistered which will prevent it from be GC'ed
Modifications:
- Change logic of native KQueue and Epoll implementations to ensure we correctly handle the case of FD reuse
- Only try to update kevent / epoll if the Channel is still open (as otherwise it will be handled by kqueue / epoll itself)
- Correctly remove AbstractEpollChannel from internal map in all cases
- Make implementation of closeAll() consistent for Epoll and KQueueEventLoop
Result:
KQueue and Epoll native transports correctly handle FD reuse
Co-authored-by: Norman Maurer <norman_maurer@apple.com>
Motivation:
OOME is occurred by increasing suppressedExceptions because other libraries call Throwable#addSuppressed. As we have no control over what other libraries do we need to ensure this can not lead to OOME.
Modifications:
Only use static instances of the Exceptions if we can either dissable addSuppressed or we run on java6.
Result:
Not possible to OOME because of addSuppressed. Fixes https://github.com/netty/netty/issues/9151.
Motivation:
The current KQueueEventLoop implementation does not process concurrent domain socket channel registration/unregistration in the order they actual
happen since unregistration are delated by an event loop task scheduling. When a domain socket is closed, it's file descriptor might be reused
quickly and therefore trigger a new channel registration using the same descriptor.
Consequently the KQueueEventLoop#add(AbstractKQueueChannel) method will overwrite the current inactive channels having the same descriptor
and the delayed KQueueEventLoop#remove(AbstractKQueueChannel) will remove the active channel that replaced the inactive one.
As active channels are registered, events for this file descriptor won't be processed anymore and the channels will never be closed.
Modifications:
Change the logic of KQueueEventLoop#remove(AbstractKQueueChannel) channels so it will check channels equality prior removal.
Result:
KQueueEventLoop won't remove anymore active channels reusing a file descriptor.
Motivation
These implementations delegate most of their methods to an existing Handle and previously extended RecvByteBufAllocator.DelegatingHandle. This was reverted in #6322 with the introduction of ExtendedHandle but it's not clear to me why it needed to be - the code looks a lot cleaner.
Modifications
Have (Epoll|KQueue)RecvByteAllocatorHandle extend DelegatingHandle again, while still implementing ExtendedHandle.
Result
Less code.
Motivation:
We currently only cover ipv4 multicast in the testsuite but we should also have tests for ipv6.
Modifications:
- Add test for ipv6
- Ensure we only try to run multicast test for ipv4 / ipv6 if the loopback interface supports it.
Result:
Better test coverage
Motivation:
When kevent(...) returns with EINTR we do not correctly decrement the timespec
structure contents to account for the time duration. This may lead to negative
values for tv_nsec which will result in an EINVAL and raise an IOException to
the event loop selection loop.
Modifications:
Correctly calculate new timeoutTs when EINTR is detected
Result:
Fixes#9013.
Motivation:
Systems depending on Netty may benefit (telemetry, alternative even loop scheduling algorithms) from knowing the number of channels assigned to each EventLoop.
Modification:
Expose the number of channels registered in the EventLoop via SingleThreadEventLoop.registeredChannels.
Result:
Fixes#8276.
Motivation:
Since DomainSocketChannel is a DuplexChannel, which be able to shutdown input or output individually on demands, but ALLOW_HALF_CLOSURE channel option has not been supported yet.
I thought this could be a missing feature of Unix domain socket, so here the PR for it.
Modifications:
1. Added allHalfClosure property both in EpollDomainSocketChannelConfig and KQueueDomainSocketChannelConfig,
2. Enabled isAllowHalfClosure method of native channel to support domain channel config,
3. Created EpollDomainSocketShutdownOutputByPeerTest and KQueueDomainSocketShutdownOutputByPeerTest to verify the change.
Result:
ALLOW_HALF_CLOSURE channel option can be set with DomainSocketChannel, and no more warning of Unknown channel option 'ALLOW_HALF_CLOSURE'.
Motivation:
At some point we needed --add-opens=java.base/java.nio=ALL-UNNAMED to run our native tests but this is not true anymore.
Modifications:
Remove --add-opens=java.base/java.nio=ALL-UNNAMED when running native tests.
Result:
Remove obsolate jvm arg.
Motivation:
`DefaultFileRegion.transferTo` will return 0 all the time when we request more data then the actual file size. This may result in a busy spin while processing the fileregion during writes.
Modifications:
- If we wrote 0 bytes check if the underlying file size is smaller then the requested count and if so throw an IOException
- Add DefaultFileRegionTest
- Add a test to the testsuite
Result:
Fixes https://github.com/netty/netty/issues/8868.
Motivation:
In https://github.com/netty/netty/pull/8665 we changed how we handle the registration of Channels to KQueue but missed to removed some code which would deregister the Channel before it actual closed the underlying socket. This could lead to have events triggered still while not have a mapping to the Channel anymore.
Modifications:
Remove deregister call during socket closure.
Result:
Fixes https://github.com/netty/netty/issues/8849.
Motivation:
The SSLEngine does provide a way to signal to the caller that it may need to execute a blocking / long-running task which then can be offloaded to an Executor to ensure the I/O thread is not blocked. Currently how we handle this in SslHandler is not really optimal as while we offload to the Executor we still block the I/O Thread.
Modifications:
- Correctly support offloading the task to the Executor while suspending processing of SSL in the I/O Thread
- Add new methods to SslContext to specify the Executor when creating a SslHandler
- Remove @deprecated annotations from SslHandler constructor that takes an Executor
- Adjust tests to also run with the Executor to ensure all works as expected.
Result:
Be able to offload long running tasks to an Executor when using SslHandler. Partly fixes https://github.com/netty/netty/issues/7862 and https://github.com/netty/netty/issues/7020.
Motivation:
We missed to extend a few tests from the testsuite and so also run these with our native KQueue and Epoll transport.
Modifications:
Extend tests and so run these for our native transports as well.
Result:
More tests.
Motivation:
In the native code EpollDatagramChannel / KQueueDatagramChannel creates a DatagramSocketAddress object for each received UDP datagram even when in connected mode as it uses the recvfrom(...) / recvmsg(...) method. Creating these is quite heavy in terms of allocations as internally, char[], String, Inet4Address, InetAddressHolder, InetSocketAddressHolder, InetAddress[], byte[] objects are getting generated when constructing the object. When in connected mode we can just use regular read(...) calls which do not need to allocate all of these.
Modifications:
- When in connected mode use read(...) and NOT recvfrom(..) / readmsg(...) to reduce allocations when possible.
- Adjust tests to ensure read works as expected when in connected mode.
Result:
Less allocations and GC when using native datagram channels in connected mode. Fixes https://github.com/netty/netty/issues/8770.
Motivation:
We have a utility method to check for > 0 and >0 arguments. We should use it.
Modification:
use checkPositive/checkPositiveOrZero instead of if statement.
Result:
Re-use utility method.
Motivation:
We need to update to a new checkstyle plugin to allow the usage of lambdas.
Modifications:
- Update to new plugin version.
- Fix checkstyle problems.
Result:
Be able to use checkstyle plugin which supports new Java syntax.
Motivation:
How we did the mapping from native code to AbstractKQueueChannel was not safe and could lead to heap corruption. This then sometimes produced ClassCastExceptions or could also lead to crashes. This happened sometimes when running the testsuite.
Modifications:
Use a Map for the mapping (just as we do in the native epoll transport).
Result:
No more heap corruption / crashes.
Motivation:
Most of the maven modules do not explicitly declare their
dependencies and rely on transitivity, which is not always correct.
Modifications:
For all maven modules, add all of their dependencies to pom.xml
Result:
All of the (essentially non-transitive) depepdencies of the modules are explicitly declared in pom.xml
