Motivation:
At the moment we log priming read and handshake errors via info log level and still throw a SSLException that contains the error. We should only log with debug level to generate less noise.
Modifications:
Change logging to debug level.
Result:
Less noise .
Motivation:
SonarQube (clinker.netty.io/sonar) reported a few 'critical' issues related to the OpenSslEngine.
Modifications:
- Remove potential for dereference of null variable.
- Remove duplicate null check and TODO cleanup.
Results:
Less potential for null dereference, cleaner code, and 1 less TODO.
Motivation:
SslHandler adds a pending write with an empty buffer and a VoidChannelPromise when a user flush and not pending writes are currently stored. This may produce an IllegalStateException later if the user try to add a ChannelFutureListener to the promise in the next ChannelOutboundHandler.
Modifications:
Replace ctx.voidPromise() with ctx.newPromise()
Result:
No more IllegalStateException possible
Motivation:
SSLEngine specifies that IllegalArgumentException must be thrown if a null argument is given when using wrap(...) or unwrap(...).
Modifications:
Replace NullPointerException with IllegalArgumentException to match the javadocs.
Result:
Match the javadocs.
Motivation:
We failed to correctly calculate the endOffset when wrap multiple ByteBuffer and so not wrapped everything when an offset > 0 is used.
Modifications:
Correctly calculate endOffset.
Result:
All ByteBuffers are correctly wrapped when offset > 0.
Motivation:
When SslHandler.unwrap() copies SSL records into a heap buffer, it does
not update the start offset, causing IndexOutOfBoundsException.
Modifications:
- Copy to a heap buffer before calling unwrap() for simplicity
- Do not copy an empty buffer to a heap buffer.
- unwrap(... EMPTY_BUFFER ...) never involves copying now.
- Use better parameter names for unwrap()
- Clean-up log messages
Result:
- Bugs fixed
- Cleaner code
Motivation:
When using OpenSslEngine with the SslHandler it is possible to reduce memory copies by unwrap(...) multiple ByteBuffers at the same time. This way we can eliminate a memory copy that is needed otherwise to cumulate partial received data.
Modifications:
- Add OpenSslEngine.unwrap(ByteBuffer[],...) method that can be used to unwrap multiple src ByteBuffer a the same time
- Use a CompositeByteBuffer in SslHandler for inbound data so we not need to memory copy
- Add OpenSslEngine.unwrap(ByteBuffer[],...) in SslHandler if OpenSslEngine is used and the inbound ByteBuf is backed by more then one ByteBuffer
- Reduce object allocation
Result:
SslHandler is faster when using OpenSslEngine and produce less GC
Motivation:
Currently when there are bytes left in the cumulation buffer we do a byte copy to produce the input buffer for the decode method. This can put quite some overhead on the impl.
Modification:
- Use a CompositeByteBuf to eliminate the byte copy.
- Allow to specify if a CompositeBytebug should be used or not as some handlers can only act on one ByteBuffer in an efficient way (like SslHandler :( ).
Result:
Performance improvement as shown in the following benchmark.
Without this patch:
[xxx@xxx ~]$ ./wrk-benchmark
Running 5m test @ http://xxx:8080/plaintext
16 threads and 256 connections
Thread Stats Avg Stdev Max +/- Stdev
Latency 20.19ms 38.34ms 1.02s 98.70%
Req/Sec 241.10k 26.50k 303.45k 93.46%
1153994119 requests in 5.00m, 155.84GB read
Requests/sec: 3846702.44
Transfer/sec: 531.93MB
With the patch:
[xxx@xxx ~]$ ./wrk-benchmark
Running 5m test @ http://xxx:8080/plaintext
16 threads and 256 connections
Thread Stats Avg Stdev Max +/- Stdev
Latency 17.34ms 27.14ms 877.62ms 98.26%
Req/Sec 252.55k 23.77k 329.50k 87.71%
1209772221 requests in 5.00m, 163.37GB read
Requests/sec: 4032584.22
Transfer/sec: 557.64MB
Motivation:
When a user sees an error message, sometimes he or she does not know
what exactly he or she has to do to fix the problem.
Modifications:
Log the URL of the wiki pages that might help the user troubleshoot.
Result:
We are more friendly.
Motivation:
When a user deliberatively omitted netty-tcnative from classpath, he or
she will see an ugly stack trace of ClassNotFoundException.
Modifications:
Log more briefly when netty-tcnative is not in classpath.
Result:
Better-looking log at DEBUG level
Motivation:
- There's no point of pre-population.
- Waste of memory and time because they are going to be cached lazily
- Some pre-populated cipher suites are ancient and will be unused
Modification:
- Remove cache pre-population
Result:
Sanity restored
Motivation:
Calling JNI methods is pretty expensive, so we should only do if needed.
Modifications:
Lazy call methods if needed.
Result:
Better performance.
Motivation:
SSL_set_cipher_list() in OpenSSL does not fail as long as at least one
cipher suite is available. It is different from the semantics of
SSLEngine.setEnabledCipherSuites(), which raises an exception when the
list contains an unavailable cipher suite.
Modifications:
- Add OpenSsl.isCipherSuiteAvailable(String) which checks the
availability of a cipher suite
- Raise an IllegalArgumentException when the specified cipher suite is
not available
Result:
Fixed compatibility
Motivation:
To make OpenSslEngine a full drop-in replacement, we need to implement
getSupportedCipherSuites() and get/setEnabledCipherSuites().
Modifications:
- Retrieve the list of the available cipher suites when initializing
OpenSsl.
- Improve CipherSuiteConverter to understand SRP
- Add more test data to CipherSuiteConverterTest
- Add bulk-conversion method to CipherSuiteConverter
Result:
OpenSslEngine should now be a drop-in replacement for JDK SSLEngineImpl
for most cases.
Related: #3285
Motivation:
When a user attempts to switch from JdkSslContext to OpenSslContext, he
or she will see the initialization failure if he or she specified custom
cipher suites.
Modifications:
- Provide a utility class that converts between Java cipher suite string
and OpenSSL cipher suite string
- Attempt to convert the cipher suite so that a user can use the cipher
suite string format of Java regardless of the chosen SslContext impl
Result:
- It is possible to convert all known cipher suite strings.
- It is possible to switch from JdkSslContext and OpenSslContext and
vice versa without any configuration changes
Motivation:
Several issues were shown by various ticket (#2900#2956).
Also use the improvement on writability user management from #3036.
And finally add a mixte handler, both for Global and Channels, with
the advantages of being uniquely created and using less memory and
less shaping.
Issue #2900
When a huge amount of data are written, the current behavior of the
TrafficShaping handler is to limit the delay to 15s, whatever the delay
the previous write has. This is wrong, and when a huge amount of writes
are done in a short time, the traffic is not correctly shapened.
Moreover, there is a high risk of OOM if one is not using in his/her own
handler for instance ChannelFuture.addListener() to handle the write
bufferisation in the TrafficShapingHandler.
This fix use the "user-defined writability flags" from #3036 to
allow the TrafficShapingHandlers to "user-defined" managed writability
directly, as for reading, thus using the default isWritable() and
channelWritabilityChanged().
This allows for instance HttpChunkedInput to be fully compatible.
The "bandwidth" compute on write is only on "acquired" write orders, not
on "real" write orders, which is wrong from statistic point of view.
Issue #2956
When using GlobalTrafficShaping, every write (and read) are
synchronized, thus leading to a drop of performance.
ChannelTrafficShaping is not touched by this issue since synchronized is
then correct (handler is per channel, so the synchronized).
Modifications:
The current write delay computation takes into account the previous
write delay and time to check is the 15s delay (maxTime) is really
exceeded or not (using last scheduled write time). The algorithm is
simplified and in the same time more accurate.
This proposal uses the #3036 improvement on user-defined writability
flags.
When the real write occurs, the statistics are update accordingly on a
new attribute (getRealWriteThroughput()).
To limit the synchronisations, all synchronized on
GlobalTrafficShapingHandler on submitWrite were removed. They are
replaced with a lock per channel (since synchronization is still needed
to prevent unordered write per channel), as in the sendAllValid method
for the very same reason.
Also all synchronized on TrafficCounter on read/writeTimeToWait() are
removed as they are unnecessary since already locked before by the
caller.
Still the creation and remove operations on lock per channel (PerChannel
object) are synchronized to prevent concurrency issue on this critical
part, but then limited.
Additionnal changes:
1) Use System.nanoTime() instead of System.currentTimeMillis() and
minimize calls
2) Remove / 10 ° 10 since no more sleep usage
3) Use nanoTime instead of currentTime such that time spend is computed,
not real time clock. Therefore the "now" relative time (nanoTime based)
is passed on all sub methods.
4) Take care of removal of the handler to force write all pending writes
and release read too
8) Review Javadoc to explicit:
- recommandations to take into account isWritable
- recommandations to provide reasonable message size according to
traffic shaping limit
- explicit "best effort" traffic shaping behavior when changing
configuration dynamically
Add a MixteGlobalChannelTrafficShapingHandler which allows to use only one
handler for mixing Global and Channel TSH. I enables to save more memory and
tries to optimize the traffic among various channels.
Result:
The traffic shaping is more stable, even with a huge number of writes in
short time by taking into consideration last scheduled write time.
The current implementation of TrafficShapingHandler using user-defined
writability flags and default isWritable() and
fireChannelWritabilityChanged works as expected.
The statistics are more valuable (asked write vs real write).
The Global TrafficShapingHandler should now have less "global"
synchronization, hoping to the minimum, but still per Channel as needed.
The GlobalChannel TrafficShapingHandler allows to have only one handler for all channels while still offering per channel in addition to global traffic shaping.
And finally maintain backward compatibility.
Motivation:
Openssl supports the SSL_CTX_set_session_id_context function to limit for which context a session can be used. We should support this.
Modifications:
Add OpenSslServerSessionContext that exposes a setSessionIdContext(...) method now.
Result:
It's now possible to use SSL_CTX_set_session_id_context.
Motivation:
It is sometimes useful to enable / disable the session cache.
Modifications:
* Add OpenSslSessionContext.setSessionCacheEnabled(...) and isSessionCacheEnabled()
Result:
It is now possible to enable / disable cache on the fly
Motivation:
To be compatible with SSLEngine we need to support enable / disable procols on the OpenSslEngine
Modifications:
Implement OpenSslEngine.getSupportedProtocols() , getEnabledProtocols() and setEnabledProtocols(...)
Result:
Better compability with SSLEngine
Motivation:
The current implementation not returns the real session as byte[] representation.
Modifications:
Create a proper Openssl.SSLSession.get() implementation which returns the real session as byte[].
Result:
More correct implementation
Motivation:
At the moment it is not possible to make use of the session cache when OpenSsl is used. This should be possible when server mode is used.
Modifications:
- Add OpenSslSessionContext (implements SSLSessionContext) which exposes all the methods to modify the session cache.
- Add various extra methods to OpenSslSessionContext for extra functionality
- Return OpenSslSessionContext when OpenSslEngine.getSession().getContext() is called.
- Add sessionContext() to SslContext
- Move OpenSsl specific session operations to OpenSslSessionContext and mark the old methods @deprecated
Result:
It's now possible to use session cache with OpenSsl
Motivation:
ProxyHandlerTest fails with NoClassDefFoundError raised by
SslContext.newClientContext().
Modifications:
Fix a missing 'return' statement that makes the switch-case block fall
through unncecessarily
Result:
- ProxyHandlerTest does not fail anymore.
- SslContext.newClientContext() does not raise NoClassDefFoundError
anymore.
Motivation:
At the moment we use SSL.getLastError() in unwrap(...) to check for error. This is very inefficient as it creates a new String for each check and we also use a String.startsWith(...) to detect if there was an error we need to handle.
Modifications:
Use SSL.getLastErrorNumber() to detect if we need to handle an error, as this only returns a long and so no String creation happens. Also the detection is much cheaper as we can now only compare longs. Once an error is detected the lately SSL.getErrorString(long) is used to conver the error number to a String and include it in log and exception message.
Result:
Performance improvements in OpenSslEngine.unwrap(...) due less object allocation and also faster comparations.
Motivation:
As we now support OpenSslEngine for client side, we should use it when avaible.
Modifications:
Use SslProvider.OPENSSL when openssl can be found
Result:
OpenSslEngine is used whenever possible
Motivation:
When using client auth it is sometimes needed to use a custom TrustManagerFactory.
Modifications:
Allow to pass in TrustManagerFactory
Result:
It's now possible to use custom TrustManagerFactories for JdkSslServerContext and OpenSslServerContext
Motivation:
To make OpenSsl*Context a drop in replacement for JdkSsl*Context we need to use TrustManager.
Modifications:
Correctly hook in the TrustManager
Result:
Better compatibility
Motivation:
At the moment there is no way to enable client authentication when using OpenSslEngine. This limits the uses of OpenSslEngine.
Modifications:
Add support for different authentication modes.
Result:
OpenSslEngine can now also be used when client authenticiation is needed.
Motivation:
The current SSLSession implementation used by OpenSslEngine does not support various operations and so may not be a good replacement by the SSLEngine provided by the JDK implementation.
Modifications:
- Add SSLSession.getCreationTime()
- Add SSLSession.getLastAccessedTime()
- Add SSLSession.putValue(...), getValue(...), removeValue(...), getValueNames()
- Add correct SSLSession.getProtocol()
- Ensure OpenSSLEngine.getSession() is thread-safe
- Use optimized AtomicIntegerFieldUpdater when possible
Result:
More complete OpenSslEngine SSLSession implementation
Motivation:
We only support openssl for server side at the moment but it would be also useful for client side.
Modification:
* Upgrade to new netty-tcnative snapshot to support client side openssl support
* Add OpenSslClientContext which can be used to create SslEngine for client side usage
* Factor out common logic between OpenSslClientContext and OpenSslServerContent into new abstract base class called OpenSslContext
* Correctly detect handshake failures as soon as possible
* Guard against segfault caused by multiple calls to destroyPools(). This can happen if OpenSslContext throws an exception in the constructor and the finalize() method is called later during GC
Result:
openssl can be used for client and servers now.
Motivation:
SslHandler.wrap(...) does a poor job when handling CompositeByteBuf as it always call ByteBuf.nioBuffer() which will do a memory copy when a CompositeByteBuf is used that is backed by multiple ByteBuf.
Modifications:
- Use SslEngine.wrap(ByteBuffer[]...) to allow wrap CompositeByteBuf in an efficient manner
- Reduce object allocation in unwrapNonAppData(...)
Result:
Performance improvement when a CompositeByteBuf is written and the SslHandler is in the ChannelPipeline.
Motivation:
When a remote peer did open a connection and only do the handshake without sending any data and then directly close the connection we did not call shutdown() in the OpenSslEngine. This leads to a native memory leak. Beside this it also was not fireed when a OpenSslEngine was created but never used.
Modifications:
- Make sure shutdown() is called in all cases when closeInbound() is called
- Call shutdown() also in the finalize() method to ensure we release native memory when the OpenSslEngine is GC'ed
Result:
No more memory leak when using OpenSslEngine
Related:
e9685ea45a
Motivation:
SslHandler.unwrap() does not evaluate the handshake status of
SSLEngine.unwrap() when the status of SSLEngine.unwrap() is CLOSED.
It is not correct because the status does not reflect the state of the
handshake currently in progress, accoding to the API documentation of
SSLEngineResult.Status.
Also, sslCloseFuture can be notified earlier than handshake notification
because we call sslCloseFuture.trySuccess() before evaluating handshake
status.
Modifications:
- Notify sslCloseFuture after the unwrap loop is finished
- Add more assertions to SocketSslEchoTest
Result:
Potentially fix the regression caused by:
- e9685ea45a
Related: #2958
Motivation:
SslHandler currently does not issue a read() request when it is
handshaking. It makes a connection with autoRead off stall, because a
user's read() request can be used to read the handshake response which
is invisible to the user.
Modifications:
- SslHandler now issues a read() request when:
- the current handshake is in progress and channelReadComplete() is
invoked
- the current handshake is complete and a user issued a read() request
during handshake
- Rename flushedBeforeHandshakeDone to flushedBeforeHandshake for
consistency with the new variable 'readDuringHandshake'
Result:
SslHandler should work regardless whether autoRead is on or off.
Related: #3125
Motivation:
We did not expose a way to initiate TLS renegotiation and to get
notified when the renegotiation is done.
Modifications:
- Add SslHandler.renegotiate() so that a user can initiate TLS
renegotiation and get the future that's notified on completion
- Make SslHandler.handshakeFuture() return the future for the most
recent handshake so that a user can get the future of the last
renegotiation
- Add the test for renegotiation to SocketSslEchoTest
Result:
Both client-initiated and server-initiated renegotiations are now
supported properly.
Related: #3219
Motivation:
ChunkedWriteHandler.flush() does not call ctx.flush() when channel is
not writable. This can be a problem when other handler / non-Netty
thread writes messages simultaneously, because
ChunkedWriteHandler.flush() might have no chance to observe
channel.isWritable() returns true and thus the channel is never flushed.
Modifications:
- Ensure that ChunkedWriteHandler.flush() calls ctx.flush() at least
once.
Result:
A stall connection issue, that occurs when certain combination of
handlers exist in a pipeline, has been fixed. (e.g. SslHandler and
ChunkedWriteHandler)
- Parameterize DomainNameMapping to make it useful for other use cases
than just mapping to SslContext
- Move DomainNameMapping to io.netty.util
- Clean-up the API documentation
- Make SniHandler.hostname and sslContext volatile because they can be
accessed by non-I/O threads
Motivation:
We use 3 (!) libraries to build mock objects - easymock, mockito, jmock.
Mockito and jMock pulls in the different versions of Hamcrest, and it
conflicts with the version pulled by jUnit.
Modifications:
- Replace mockito-all with mockito-core to avoid pulling in outdated
jUnit and Hamcrest
- Exclude junit-dep when pulling in jmock-junit4, because it pulls an
outdated Hamcrest version
- Pull in the hamcrest-library version used by jUnit explicitly
Result:
No more dependency hell that results in NoSuchMethodError during the
tests
Motivation:
When we need to host multiple server name with a single IP, it requires
the server to support Server Name Indication extension to serve clients
with proper certificate. So the SniHandler will host multiple
SslContext(s) and append SslHandler for requested hostname.
Modification:
* Added SniHandler to host multiple certifications in a single server
* Test case
Result:
User could use SniHandler to host multiple certifcates at a time.
It's server-side only.
Motivation:
JdkSslContext used SSL_RSA_WITH_DES_CBC_SHA in its cipher suite list.
OpenSslServerContext used DES-CBC3-SHA in the same place in its cipher suite
list, which is equivalent to SSL_RSA_WITH_3DES_EDE_CBC_SHA.
This means the lists were out of sync. Furthermore, using
SSL_RSA_WITH_DES_CBC_SHA is not desirable as it uses DES, a weak cipher. Triple
DES should be used instead.
Modifications:
Replace SSL_RSA_WITH_DES_CBC_SHA with SSL_RSA_WITH_3DES_EDE_CBC_SHA in
JdkSslContext.
Result:
The JdkSslContext and OpenSslServerContext cipher suite lists are now in sync.
Triple DES is used instead of DES, which is stronger.
Motivation:
RC4 is not a recommended cipher suite anymore, as the recent research
reveals, such as:
- http://www.isg.rhul.ac.uk/tls/
Modifications:
- Remove most RC4 cipher suites from the default cipher suites
- For backward compatibility, leave RC4-SHA, while de-prioritizing it
Result:
Potentially safer default
Motivation:
Found performance issues via FindBugs and PMD.
Modifications:
- Removed unnecessary boxing/unboxing operations in DefaultTextHeaders.convertToInt(CharSequence) and DefaultTextHeaders.convertToLong(CharSequence). A boxed primitive is created from a string, just to extract the unboxed primitive value.
- Added a static modifier for DefaultHttp2Connection.ParentChangedEvent class. This class is an inner class, but does not use its embedded reference to the object which created it. This reference makes the instances of the class larger, and may keep the reference to the creator object alive longer than necessary.
- Added a static compiled Pattern to avoid compile it each time it is used when we need to replace some part of authority.
- Improved using of StringBuilders.
Result:
Performance improvements.
Motivation:
When ALPN/NPN is disabled, a user has to instantiate a new
ApplicationProtocolConfig with meaningless parameters.
Modifications:
- Add ApplicationProtocolConfig.DISABLED, the singleton instance
- Reject the constructor calls with Protocol.NONE, which doesn't make
much sense because a user should use DISABLED instead.
Result:
More user-friendly API when ALPN/NPN is not needed by a user.
Motivation:
Previous backport removed the old methods and constructors. They should
not be removed in 4.x but just deprecated in favor of the new methods
and constructors.
Modifications:
Add back the removed methods and constructors in SslContext and its
subtypes for backward compatibility.
Result:
Backward compatibility issues fixed.
Motivation:
Improvements were made on the main line to support ALPN and mutual
authentication for TLS. These should be backported.
Modifications:
- Backport commits from the master branch
- f8af84d599
- e74c8edba3
Result:
Support for ALPN and mutual authentication.
Motivation:
The SslHandler currently forces the use of a direct buffer for the input to the SSLEngine.wrap(..) operation. This allocation may not always be desired and should be conditionally done.
Modifications:
- Use the pre-existing wantsDirectBuffer variable as the condition to do the conversion.
Result:
- An allocation of a direct byte buffer and a copy of data is now not required for every SslHandler wrap operation.
Motivation:
The SslHandler wrap method requires that a direct buffer be passed to the SSLEngine.wrap() call. If the ByteBuf parameter does not have an underlying direct buffer then one is allocated in this method, but it is not released.
Modifications:
- Release the direct ByteBuffer only accessible in the scope of SslHandler.wrap
Result:
Memory leak in SslHandler.wrap is fixed.
Motivation:
Currently the last read/write throughput is calculated by first division,this will be 0 if the last read/write bytes < interval,change the order will get the correct result
Modifications:
Change the operator order from first do division to multiplication
Result:
Get the correct result instead of 0 when bytes are smaller than interval
Motivation:
handlerAdded and handlerRemoved were overriden but super was never
called, while it should.
Also add one missing information in the toString method.
Modifications:
Add the super corresponding call, and add checkInterval to the
toString() method
Result;
super method calls are correctly passed to the super implementation
part.
Motivation:
When constructing a FingerprintTrustManagerFactory from an Iterable of Strings, the fingerprints were correctly parsed but never added to the result array. The constructed FingerprintTrustManagerFactory consequently fails to validate any certificate.
Modifications:
I added a line to add each converted SHA-1 certificate fingerprint to the result array which then gets passed on to the next constructor.
Result:
Certificate fingerprints passed to the constructor are now correctly added to the array of valid fingerprints. The resulting FingerprintTrustManagerFactory object correctly validates certificates against the list of specified fingerprints.
Motivation:
In GitHub issue #2767 a bug was reported that the IPv4
default route leads to the ipfilter package denying
instead of accepting all addresses.
While the issue was reported for Netty 3.9, this bug
also applies to Netty 4 and higher.
Modifications:
When computing the subnet address from the CIDR prefix,
correctly handle the case where the prefix is set to zero.
Result:
Ipfilter accepts all addresses when passed the
IPv4 default route.
Related issue: #2741 and #2151
Motivation:
There is no way for ChunkedWriteHandler to know the progress of the
transfer of a ChannelInput. Therefore, ChannelProgressiveFutureListener
cannot get exact information about the progress of the transfer.
If you add a few methods that optionally provides the transfer progress
to ChannelInput, it becomes possible for ChunkedWriteHandler to notify
ChannelProgressiveFutureListeners.
If the input has no definite length, we can still use the progress so
far, and consider the length of the input as 'undefined'.
Modifications:
- Add ChunkedInput.progress() and ChunkedInput.length()
- Modify ChunkedWriteHandler to use progress() and length() to notify
the transfer progress
Result:
ChunkedWriteHandler now notifies ChannelProgressiveFutureListener.
Motivation:
Currently Traffic Shaping is using 1 timer only and could lead to
"partial" wrong bandwidth computation when "short" time occurs between
adding used bytes and when the TrafficCounter updates itself and finally
when the traffic is computed.
Indeed, the TrafficCounter is updated every x delay and it is at the
same time saved into "lastXxxxBytes" and set to 0. Therefore, when one
request the counter, it first updates the TrafficCounter with the added
used bytes. If this value is set just before the TrafficCounter is
updated, then the bandwidth computation will use the TrafficCounter with
a "0" value (this value being reset once the delay occurs). Therefore,
the traffic shaping computation is wrong in rare cases.
Secondly the traffic shapping should avoid if possible the "Timeout"
effect by not stopping reading or writing more than a maxTime, this
maxTime being less than the TimeOut limit.
Thirdly the traffic shapping in read had an issue since the readOp
was not set but should, turning in no read blocking from socket
point of view.
Modifications:
The TrafficCounter has 2 new methods that compute the time to wait
according to read or write) using in priority the currentXxxxBytes (as
before), but could used (if current is at 0) the lastXxxxxBytes, and
therefore having more chance to take into account the real traffic.
Moreover the Handler could change the default "max time to wait", which
is by default set to half of "standard" Time Out (30s:2 = 15s).
Finally we add the setAutoRead(boolean) accordingly to the situation,
as proposed in #2696 (this pull request is in error for unknown reason).
Result:
The Traffic Shaping is better take into account (no 0 value when it
shouldn't) and it tries to not block traffic more than Time Out event.
Moreover the read is really stopped from socket point of view.
This version is similar to #2388 and #2450.
This version is for V4.1, and includes the #2696 pull request
to ease the merge process.
It is compatible with master too.
Including also #2748
The test minimizes time check by reducing to 66ms steps (55s).
Motivation:
Sometimes ChannelHandler need to queue writes to some point and then process these. We currently have no datastructure for this so the user will use an Queue or something like this. The problem is with this Channel.isWritable() will not work as expected and so the user risk to write to fast. That's exactly what happened in our SslHandler. For this purpose we need to add a special datastructure which will also take care of update the Channel and so be sure that Channel.isWritable() works as expected.
Modifications:
- Add PendingWriteQueue which can be used for this purpose
- Make use of PendingWriteQueue in SslHandler
Result:
It is now possible to queue writes in a ChannelHandler and still have Channel.isWritable() working as expected. This also fixes#2752.
Motivation:
Currently it is not possible to load an encrypted private key when
creating a JDK based SSL server context.
Modifications:
- Added static method to JdkSslServerContext which handles key spec generation for (encrypted) private keys and make use of it.
-Added tests for creating a SSL server context based on a (encrypted)
private key.
Result:
It is now possible to create a JDK based SSL server context with an
encrypted (password protected) private key.
Motivation:
Message from FindBugs:
This method performs synchronization an object that is an instance of a class from the java.util.concurrent package (or its subclasses). Instances of these classes have their own concurrency control mechanisms that are orthogonal to the synchronization provided by the Java keyword synchronized. For example, synchronizing on an AtomicBoolean will not prevent other threads from modifying the AtomicBoolean.
Such code may be correct, but should be carefully reviewed and documented, and may confuse people who have to maintain the code at a later date.
Modification:
Use synchronized(this)
Result:
Less confusing code
Motivation:
Now Netty has a few problems with null values.
Modifications:
- Check HAProxyProxiedProtocol in HAProxyMessage constructor and throw NPE if it is null.
If HAProxyProxiedProtocol is null we will set AddressFamily as null. So we will get NPE inside checkAddress(String, AddressFamily) and it won't be easy to understand why addrFamily is null.
- Check File in DiskFileUpload.toString().
If File is null we will get NPE when calling toString() method.
- Check Result<String> in MqttDecoder.decodeConnectionPayload(...).
If !mqttConnectVariableHeader.isWillFlag() || !mqttConnectVariableHeader.hasUserName() || !mqttConnectVariableHeader.hasPassword() we will get NPE when we will try to create new instance of MqttConnectPayload.
- Check Unsafe before calling unsafe.getClass() in PlatformDependent0 static block.
- Removed unnecessary null check in WebSocket08FrameEncoder.encode(...).
Because msg.content() can not return null.
- Removed unnecessary null check in DefaultStompFrame(StompCommand) constructor.
Because we have this check in the super class.
- Removed unnecessary null checks in ConcurrentHashMapV8.removeTreeNode(TreeNode<K,V>).
- Removed unnecessary null check in OioDatagramChannel.doReadMessages(List<Object>).
Because tmpPacket.getSocketAddress() always returns new SocketAddress instance.
- Removed unnecessary null check in OioServerSocketChannel.doReadMessages(List<Object>).
Because socket.accept() always returns new Socket instance.
- Pass Unpooled.buffer(0) instead of null inside CloseWebSocketFrame(boolean, int) constructor.
If we will pass null we will get NPE in super class constructor.
- Added throw new IllegalStateException in GlobalEventExecutor.awaitInactivity(long, TimeUnit) if it will be called before GlobalEventExecutor.execute(Runnable).
Because now we will get NPE. IllegalStateException will be better in this case.
- Fixed null check in OpenSslServerContext.setTicketKeys(byte[]).
Now we throw new NPE if byte[] is not null.
Result:
Added new null checks when it is necessary, removed unnecessary null checks and fixed some NPE problems.
Motivation:
There is no way for a ChannelHandler to check if the passed in ChannelPromise for a write(...) call is a VoidChannelPromise. This is a problem as some handlers need to add listeners to the ChannelPromise which is not possible in the case of a VoidChannelPromise.
Modification:
- Introduce ChannelFuture.isVoid() which will return true if it is not possible to add listeners or wait on the result.
- Add ChannelPromise.unvoid() which allows to create a ChannelFuture out of a void ChannelFuture which supports all the operations.
Result:
It's now easy to write ChannelHandler implementations which also works when a void ChannelPromise is used.
Motivation:
When Netty runs in a managed environment such as web application server,
Netty needs to provide an explicit way to remove the thread-local
variables it created to prevent class loader leaks.
FastThreadLocal uses different execution paths for storing a
thread-local variable depending on the type of the current thread.
It increases the complexity of thread-local removal.
Modifications:
- Moved FastThreadLocal and FastThreadLocalThread out of the internal
package so that a user can use it.
- FastThreadLocal now keeps track of all thread local variables it has
initialized, and calling FastThreadLocal.removeAll() will remove all
thread-local variables of the caller thread.
- Added FastThreadLocal.size() for diagnostics and tests
- Introduce InternalThreadLocalMap which is a mixture of hard-wired
thread local variable fields and extensible indexed variables
- FastThreadLocal now uses InternalThreadLocalMap to implement a
thread-local variable.
- Added ThreadDeathWatcher.unwatch() so that PooledByteBufAllocator
tells it to stop watching when its thread-local cache has been freed
by FastThreadLocal.removeAll().
- Added FastThreadLocalTest to ensure that removeAll() works
- Added microbenchmark for FastThreadLocal and JDK ThreadLocal
- Upgraded to JMH 0.9
Result:
- A user can remove all thread-local variables Netty created, as long as
he or she did not exit from the current thread. (Note that there's no
way to remove a thread-local variable from outside of the thread.)
- FastThreadLocal exposes more useful operations such as isSet() because
we always implement a thread local variable via InternalThreadLocalMap
instead of falling back to JDK ThreadLocal.
- FastThreadLocalBenchmark shows that this change improves the
performance of FastThreadLocal even more.
Motivation:
Provide a faster ThreadLocal implementation
Modification:
Add a "FastThreadLocal" which uses an EnumMap and a predefined fixed set of possible thread locals (all of the static instances created by netty) that is around 10-20% faster than standard ThreadLocal in my benchmarks (and can be seen having an effect in the direct PooledByteBufAllocator benchmark that uses the DEFAULT ByteBufAllocator which uses this FastThreadLocal, as opposed to normal instantiations that do not, and in the new RecyclableArrayList benchmark);
Result:
Improved performance
Motivation:
ChannelTrafficShapingHandler may corrupt inbound data stream by
scheduling the fireChannelRead event.
Modification:
Always call fireChannelRead(...) and only suspend reads after it
Result:
No more data corruption
Motivation:
According to TLS ALPN draft-05, a client sends the list of the supported
protocols and a server responds with the selected protocol, which is
different from NPN. Therefore, ApplicationProtocolSelector won't work
with ALPN
Modifications:
- Use Iterable<String> to list the supported protocols on the client
side, rather than using ApplicationProtocolSelector
- Remove ApplicationProtocolSelector
Result:
Future compatibility with TLS ALPN
Motivation:
- OpenSslEngine and JDK SSLEngine (+ Jetty NPN) have different APIs to
support NextProtoNego extension.
- It is impossible to configure NPN with SslContext when the provider
type is JDK.
Modification:
- Implement NextProtoNego extension by overriding the behavior of
SSLSession.getProtocol() for both OpenSSLEngine and JDK SSLEngine.
- SSLEngine.getProtocol() returns a string delimited by a colon (':')
where the first component is the transport protosol (e.g. TLSv1.2)
and the second component is the name of the application protocol
- Remove the direct reference of Jetty NPN classes from the examples
- Add SslContext.newApplicationProtocolSelector
Result:
- A user can now use both JDK SSLEngine and OpenSslEngine for NPN-based
protocols such as HTTP2 and SPDY
Motivation:
For an unknown reason, JVM of JDK8 crashes intermittently when
SslHandler feeds a direct buffer to SSLEngine.unwrap() *and* the current
cipher suite has GCM (Galois/Counter Mode) enabled.
Modifications:
Convert the inbound network buffer to a heap buffer when the current
cipher suite is using GCM.
Result:
JVM does not crash anymore.
Motivation:
JDK's SSLEngine.wrap() requires the output buffer to be always as large as MAX_ENCRYPTED_PACKET_LENGTH even if the input buffer contains small number of bytes. Our OpenSslEngine implementation does not have such wasteful behaviot.
Modifications:
If the current SSLEngine is OpenSslEngine, allocate as much as only needed.
Result:
Less peak memory usage.
Motivation:
Previous fix for the OpenSslEngine compatibility issue (#2216 and
18b0e95659) was to feed SSL records one by
one to OpenSslEngine.unwrap(). It is not optimal because it will result
in more JNI calls.
Modifications:
- Do not feed SSL records one by one.
- Feed as many records as possible up to MAX_ENCRYPTED_PACKET_LENGTH
- Deduplicate MAX_ENCRYPTED_PACKET_LENGTH definitions
Result:
- No allocation of intemediary arrays
- Reduced number of calls to SSLEngine and thus its underlying JNI calls
- A tad bit increase in throughput, probably reverting the tiny drop
caused by 18b0e95659
Motivation:
Some users already use an SSLEngine implementation in finagle-native. It
wraps OpenSSL to get higher SSL performance. However, to take advantage
of it, finagle-native must be compiled manually, and it means we cannot
pull it in as a dependency and thus we cannot test our SslHandler
against the OpenSSL-based SSLEngine. For an instance, we had #2216.
Because the construction procedures of JDK SSLEngine and OpenSslEngine
are very different from each other, we also need to provide a universal
way to enable SSL in a Netty application.
Modifications:
- Pull netty-tcnative in as an optional dependency.
http://netty.io/wiki/forked-tomcat-native.html
- Backport NativeLibraryLoader from 4.0
- Move OpenSSL-based SSLEngine implementation into our code base.
- Copied from finagle-native; originally written by @jpinner et al.
- Overall cleanup by @trustin.
- Run all SslHandler tests with both default SSLEngine and OpenSslEngine
- Add a unified API for creating an SSL context
- SslContext allows you to create a new SSLEngine or a new SslHandler
with your PKCS#8 key and X.509 certificate chain.
- Add JdkSslContext and its subclasses
- Add OpenSslServerContext
- Add ApplicationProtocolSelector to ensure the future support for NPN
(NextProtoNego) and ALPN (Application Layer Protocol Negotiation) on
the client-side.
- Add SimpleTrustManagerFactory to help a user write a
TrustManagerFactory easily, which should be useful for those who need
to write an alternative verification mechanism. For example, we can
use it to implement an unsafe TrustManagerFactory that accepts
self-signed certificates for testing purposes.
- Add InsecureTrustManagerFactory and FingerprintTrustManager for quick
and dirty testing
- Add SelfSignedCertificate class which generates a self-signed X.509
certificate very easily.
- Update all our examples to use SslContext.newClient/ServerContext()
- SslHandler now logs the chosen cipher suite when handshake is
finished.
Result:
- Cleaner unified API for configuring an SSL client and an SSL server
regardless of its internal implementation.
- When native libraries are available, OpenSSL-based SSLEngine
implementation is selected automatically to take advantage of its
performance benefit.
- Examples take advantage of this modification and thus are cleaner.
Motivation:
When writing data from a server before the ssl handshake completes may not be written at all to the remote peer
if nothing else is written after the handshake was done.
Modification:
Correctly try to write pending data after the handshake was complete
Result:
Correctly write out all pending data
Motivation:
As discussed in #2250, it will become much less complicated to implement
deregistration and reregistration of a channel once #2250 is resolved.
Therefore, there's no need to deprecate deregister() and
channelUnregistered().
Modification:
- Undeprecate deregister() and channelUnregistered()
- Remove SuppressWarnings annotations where applicable
Result:
We (including @jakobbuchgraber) are now ready to play with #2250 at
master
Motivation:
4 and 5 were diverged long time ago and we recently reverted some of the
early commits in master. We must make sure 4.1 and master are not very
different now.
Modification:
Fix found differences
Result:
4.1 and master got closer.
Motivation:
4 and 5 were diverged long time ago and we recently reverted some of the
early commits in master. We must make sure 4.1 and master are not very
different now.
Modification:
Remove ChannelHandlerInvoker.writeAndFlush(...) and the related
implementations.
Result:
4.1 and master got closer.
Motivation:
4 and 5 were diverged long time ago and we recently reverted some of the
early commits in master. We must make sure 4.1 and master are not very
different now.
Modification:
Fix found differences
Result:
4.1 and master got closer.
Motivation:
Some SSLEngine implementations violate the contract and raises an
exception when SslHandler feeds an input buffer that contains multiple
SSL records to SSLEngine.unwrap(), while the expected behavior is to
decode the first record and return.
Modification:
- Modify SslHandler.decode() to keep the lengths of each record and feed
SSLEngine.unwrap() record by record to work around the forementioned
issue.
- Rename unwrap() to unwrapMultiple() and unwrapNonApp()
- Rename unwrap0() to unwrapSingle()
Result:
SslHandler now works OpenSSLEngine from finagle-native. Performance
impact remains unnoticeable. Slightly better readability. Fixes#2116.
Motivation:
Some Android SSLEngine implementations skip FINISHED handshake status
and go straightly into NOT_HANDSHAKING. This behavior blocks SslHandler
from notifying its handshakeFuture, because we do the notification when
SSLEngine enters the FINISHED state.
Modification:
When the current handshake state is NOT_HANDSHAKING and the
handshakeFuture is not fulfilled yet, treat NOT_HANDSHAKING as FINISHED.
Result:
Better Android compatibility - fixes#1823
Motivation:
When using System.getProperty(...) and various methods to get a ClassLoader it will fail when a SecurityManager is in place.
Modifications:
Use a priveled block if needed. This work is based in the PR #2353 done by @anilsaldhana .
Result:
Code works also when SecurityManager is present
Motivation:
In SslHandler.safeClose(...) we attach a ChannelFutureListener to the flushFuture and will notify the ChannelPromise which was used for close(...) in it. The problem here is that we only call ChannelHandlerContext.close(ChannelPromise) if Channel.isActive() is true and otherwise not notify it at all. We should just call ChannelHandlerContext.close(ChannelPromise) in all cases.
Modifications:
Always call ChannelHandlerContext.close(ChannelPromise) in the ChannelFutureListeiner
Result:
ChannelPromise used for close the Channel is notified in all cases
Motivation:
In ChunkedWriteHandler, there is a redundant variable that servers
no purpose. It implies that under some conditions you might not want
to flush.
Modifications:
Removed the variable and the if condition that read it. The boolean
was always true so just removing the if statement was fine.
Result:
Slightly less misleading code.
Motivation:
Currently we use System.currentTimeMillis() in our timeout handlers this is bad
for various reasons like when the clock adjusts etc.
Modifications:
Replace System.currentTimeMillis() with System.nanoTime()
Result:
More robust timeout handling
Motivation:
We don't really need to propagate an event when handling the event fails.
Modifications:
Do not use finally block in AbstractRemoteAddressFilter
Result:
AbstractRemoteaddressFilter does not forward an event in case of failure.
Motivation:
Recently merged ipfilter package has the following problems:
* AbstractIpFilterHandler could be improved to support any SocketAddress types rather than only InetSocketAddress.
* AbstractIpFilterHandler can be removed immediately after decision is made rather than keeping the outcome of the decision as an attribute.
* AbstractIpFilterHandler doesn't have a hook for the accepted addresses.
* The hook method (reject()) needs to be named in line with other handler methods (i.e. channelRejected())
* IpFilterRuleHandler should allow accepting zero rules - it's particularly useful for machine-configured setup (i.e. specifying zero rules disables ipfilter).
* IpFilterRuleType.ALLOW/DENY should be ACCEPT/REJECT for consistency.
Modifications:
* AbstractIpFilterHandler has been renamed to AbstractRemoteAddressFilter and now uses type parameter.
* Added channelAccepted() and renamed reject() to channelRejected()
* Added ChannelHandlerContext as a parameter of accept() so that accept() can add a listener to the closeFuture() of the channel. This way, UniqueIpFilter continue working even if we remove the filtering handler early.
* Various renames
* IpFilterRuleHandler -> RuleBasedIpFilter
* UniqueIpFilterHandler -> UniqueIpFilter
Result:
* Much cleaner API with more extensibility
Motivation:
ChunkedWriteHandler can sometimes fail to write the last chunk of a ChunkedInput due to an I/O error. Subsequently, the ChunkedInput's associated promise is marked as failure and the connection is closed. When the connection is closed, ChunkedWriteHandler attempts to clean up its message queue and to mark their promises as success or failure. However, because the promise of the ChunkedInput, which was consumed completely yet failed to be written, is already marked as failure, the attempt to mark it as success fails, leading a WARN level log.
Modification:
Use trySuccess() instead of setSuccess() so that the attempt to mark a ChunkedInput as success does not raise an exception even if the promise is already done.
Result:
Fixes#2249
- Use ': ' instead of '(...)' for simpler string concatenation and prettier presentation
- Optimize the overall performance of format*() methods
- All format*() methods are now expected to encode the channel information by themselves so that StringBuilder instances are created less often.
- Use a look-up table for generating per-row prefixes
- Hid formatByteBuf(), formatByteBufHolder(), and formatNonByteBuf() from user because a user can always override format(ctx, eventName, arg). For example, to disable hexdump:
protected void format(ChannelHandlerContext ctx, String eventName, Object arg) {
if (arg instanceof ByteBuf) {
super.format(ctx, eventName, arg.toString());
} else {
super.format(ctx, eventName, arg);
}
}
- Fixes#2003 properly
- Instead of using 'bundle' packaging, use 'jar' packaging. This is
more robust because some strict build tools fail to retrieve the
artifacts from a Maven repository unless their packaging is not 'jar'.
- All artifacts now contain META-INF/io.netty.version.properties, which
provides the detailed information about the build and repository.
- Removed OSGi testsuite temporarily because it gives false errors
during split package test and examination.
- Add io.netty.util.Version for easy retrieval of version information
- Fixes#1905
- Call ctx.flush() only when necessary
- Improve the estimation of application and packet buffer sizes
- decode() method now tries to call unwrap() with as many SSL records as
possible to reduce the number of events triggered
