Commit Graph

236 Commits

Author SHA1 Message Date
Norman Maurer
0fffc844d6 Only load native transport if running architecture match the compiled library architecture.
Motivation:

We should only try to load the native artifacts if the architecture we are currently running on is the same as the one the native libraries were compiled for.

Modifications:

Include architecture in native lib name and append the current arch when trying to load these. This will fail then if its not the same as the arch of the compiled arch.

Result:

Fixes [#7150].
2017-09-04 13:34:55 +02:00
Carl Mastrangelo
c891c9c13f Include more detail why Unsafe is not available
Motivation:
PD and PD0 Both try to find and use Unsafe.  If unavailable, they
try to log why and continue on.  However, it is not always east to
enable this logging.  Chaining exceptions together is much easier
to reach, and the original exception is relevant when Unsafe is
needed.

Modifications:
* Make PD log why PD0 could not be loaded with a trace level log
* Make PD0 remember why Unsafe wasn't available
* Expose unavailability cause through PD for higher level use.
* Make Epoll and KQueue include the reason when failing

Result:
Easier debugging in hard to reconfigure environments
2017-08-29 22:02:06 +02:00
Scott Mitchell
89ecb4b4a4 AutoClose behavior may infinite loop
Motivation:
If AutoClose is false and there is a IoException then AbstractChannel will not close the channel but instead just fail flushed element in the ChannelOutboundBuffer. AbstractChannel also notifies of writability changes, which may lead to an infinite loop if the peer has closed its read side of the socket because we will keep accepting more data but continuously fail because the peer isn't accepting writes.

Modifications:
- If the transport throws on a write we should acknowledge that the output side of the channel has been shutdown and cleanup. If the channel can't accept more data because it is full, and still healthy it is not expected to throw. However if the channel is not healthy it will throw and is not expected to accept any more writes. In this case we should shutdown the output for Channels that support this feature and otherwise just close.
- Connection-less protocols like UDP can remain the same because the channel may disconnected temporarily.
- Make sure AbstractUnsafe#shutdownOutput is called because the shutdown on the socket may throw an exception.

Result:
More correct handling of write failure when AutoClose is false.
2017-08-25 21:01:41 -07:00
Norman Maurer
b967805f32 [maven-release-plugin] prepare for next development iteration 2017-08-24 15:38:22 +02:00
Norman Maurer
da8e010a42 [maven-release-plugin] prepare release netty-4.1.15.Final 2017-08-24 15:37:59 +02:00
Carl Mastrangelo
7f1051b6ca Include JNIEXPORT on exported symbols
Motivation:
As noticed in https://stackoverflow.com/questions/45700277/
compilation can fail if the definition of a method doesn't
match the declaration.  It's easy enough to add this in, and make
it easy to compile.

Modifications:
Add JNIEXPORT to the entry points.

* On Windows this adds: `__declspec(dllexport)`
* On Mac this adds: `__attribute__((visibility("default")))`
* On Linux (GCC 4.2+) this adds: ` __attribute__((visibility("default")))`
* On other it doesn't add anything.

Result:
Easier compilation
2017-08-18 17:34:48 -07:00
Scott Mitchell
fe2dd973e9 Unify KQueue and Epoll wait timeout approach
Motivation:
KQueueEventLoop and EpollEventLoop implement different approaches to applying a timeout of their respective poll calls. Epoll attempts to ensure the desired timeout is satisfied at the java layer and at the JNI layer, but it should be sufficient to account for spurious wakups at the JNI layer. Epoll timeout granularity is also limited to milliseconds which may be too large for some latency sensitive applications.

Modifications:
- Make EpollEventLoop wait method look like KQueueEventLoop
- Epoll should support a finer timeout granularity via timerfd_create. We can hide most of these details behind the epollWait0 JNI call to avoid crossing additional JNI boundaries.

Result:
More consistent timeout approach between KQueue and Epoll.
2017-08-18 13:09:02 -07:00
Scott Mitchell
1d7c3fb7ee KQueue detect peer close without EVFILT_READ
Motivation:
The EPOLL transport uses EPOLLRDHUP to detect when the peer closes the write side of the socket. Currently KQueue is not able to mimic this behavior and the only way to detect if the peer has closed is to read. It may not always be appropriate to read for backpressure and other reasons at the application level.

Modifications:
- Support EVFILT_SOCK filter which provides notification when the peer closes the socket

Result:
KQueue transport has more consistent behavior with Epoll transport for detecting peer closure.
2017-08-18 11:00:18 -07:00
Carl Mastrangelo
e4af881bdb Do not define JNI_OnLoad when not dynamic
Motivation:
Due to an oversight (by myself), linking two JNI modules with
duplicate symbols fails in linking.  This only seems to happen
some of the time (the behavior seems to be different between GCC
and Clang toolchains).  For instance, including both netty tcnative
and netty epoll fails to link because of duplicate JNI_OnLoad
symobols.

Modification:
Do not define the JNI_OnLoad and JNI_OnUnload symbols when
compiling for static linkage, as indicated by the NETTY_BUILD_STATIC
preprocessor define.  They are never directly called when
statically linked.

Result:
Able to statically compile epoll and tcnative code into a single
binary.
2017-08-18 09:20:58 +02:00
Norman Maurer
19dcb15062 Use underscore in native library names for consistency.
Motivation:

At the moment we try to load the library using multiple names which includes names using - but also _ . We should just use _ all the time.

Modifications:

Replace - with _

Result:

Fixes [#7069]
2017-08-15 06:02:00 +02:00
Scott Mitchell
237a4da1b7 Shutting down the outbound side of the channel should not accept future writes
Motivation:
Implementations of DuplexChannel delegate the shutdownOutput to the underlying transport, but do not take any action on the ChannelOutboundBuffer. In the event of a write failure due to the underlying transport failing and application may attempt to shutdown the output and allow the read side the transport to finish and detect the close. However this may result in an issue where writes are failed, this generates a writability change, we continue to write more data, and this may lead to another writability change, and this loop may continue. Shutting down the output should fail all pending writes and not allow any future writes to avoid this scenario.

Modifications:
- Implementations of DuplexChannel should null out the ChannelOutboundBuffer and fail all pending writes

Result:
More controlled sequencing for shutting down the output side of a channel.
2017-08-04 10:59:57 -07:00
Norman Maurer
4bb89dcc54 Correctly handle connect/disconnect in EpollDatagramChannel / KQueueDatagramChannel
Motivation:

We did not correctly handle connect() and disconnect() in EpollDatagramChannel / KQueueDatagramChannel and so the behavior was different compared to NioDatagramChannel.

Modifications:

- Correct implement connect and disconnect methods
- Share connect and related code
- Add tests

Result:

EpollDatagramChannel / KQueueDatagramChannel also supports correctly connect() and disconnect() methods.
2017-08-04 09:22:53 +02:00
Norman Maurer
52f384b37f [maven-release-plugin] prepare for next development iteration 2017-08-02 12:55:10 +00:00
Norman Maurer
8cc1071881 [maven-release-plugin] prepare release netty-4.1.14.Final 2017-08-02 12:54:51 +00:00
Carl Mastrangelo
d8f4547f5c Unify {Epoll,KQueue}EventLoopGroup initialization.
Motivation:
`Epoll.ensureAvailability()` is called multiple times, once in
static initialization and in a couple of the constructors.  This is
redundant and confusing to read.

Modifications:
Move `Epoll.ensureAvailability()` call into an instance initializer
and remove all other references.  This ensures that every EELG
checks availability, while still delaying the check until
construction.  This pattern is used when there are multiple ctors,
as in this class.

Result:
Easier to read code.
2017-07-24 20:14:54 +02:00
Norman Maurer
3cdff36821 Update tests to not use TestUtils.getFreePort() and so ensure we not try to use a port that is used by the system in the meantime.
Motivation:

We should not try to detect a free port in tests put just use 0 when bind so there is no race in which the system my bind something to the port we choosen before.

Modifications:

- Remove the usage of TestUtils.getFreePort() in the testsuite
- Remove hack to workaround bind errors which will not happen anymore now

Result:

Less flacky tests.
2017-07-20 08:25:37 +02:00
Scott Mitchell
7cfe416182 Use unbounded queues from JCTools 2.0.2
Motivation:
JCTools 2.0.2 provides an unbounded MPSC linked queue. Before we shaded JCTools we had our own unbounded MPSC linked queue and used it in various places but gave this up because there was no public equivalent available in JCTools at the time.

Modifications:
- Use JCTool's MPSC linked queue when no upper bound is specified

Result:
Fixes https://github.com/netty/netty/issues/5951
2017-07-10 12:32:15 -07:00
Norman Maurer
2a376eeb1b [maven-release-plugin] prepare for next development iteration 2017-07-06 13:24:06 +02:00
Norman Maurer
c7f8168324 [maven-release-plugin] prepare release netty-4.1.13.Final 2017-07-06 13:23:51 +02:00
Norman Maurer
c318fc7cea Remove not needed intermediate collection while reading DatagramPackets in native transports
Motivation:

We used an intermediate collection to store the read DatagramPackets and only fired these through the pipeline once wewere done with the reading loop. This is not needed and can also increase memory usage.

Modifications:

Remove intermediate collection

Result:

Less overhead and possible less memory usage during read loop.
2017-07-05 18:20:05 +02:00
Scott Mitchell
1df8f2ccd1 KQueue crash due to close/cleanup sequencing
Motivation:
The kqueue documentation states that 'Calling close() on a file descriptor will remove any kevents that reference the descriptor.' [1], but doesn't mention if this cleanup will be done synchronously. Under some circumstances it has been observed that cleanup was not done immediately and when KQueueEventLoop attempted to access the channel associated with the event the JVM would crash, a ClassCastException, or generally undefined behavior would occur because of invalid pointer references.

[1] https://www.freebsd.org/cgi/man.cgi?query=kqueue&sektion=2

Modifications:
- AbstractKqueueChannel#doClose should not rely upon this assumption and instead should call doDeregister() to ensure cleanup is done synchronously.
- Deleting a kevent should also set the jniSelfPtr stored in the udata of that kevent to NULL, to ensure we will not dereference it later.

Result:
No more kqueue crash due to close/cleanup sequencing.
2017-06-28 17:34:19 -04:00
Scott Mitchell
07a641900c transport-native-kqueue libraries should not lazy link
Motivation:
We rely upon the linker being non-lazy to test compatibility the native library compatibility for kqueue, but the default mode of operation is to lazy link.

Modifications:
- We should modify the build scripts to inform the linker that this library should not be lazy linked
- Error messages changes
dyld: lazy symbol binding failed: Symbol not found: _clock_gettime

java.lang.UnsatisfiedLinkError: unsupported JNI version 0xFFFFFFFF required by .../libnetty-transport-native-kqueue.dylib

Result:
Link errors are detected upon library load time.
2017-06-28 11:47:16 -04:00
Carl Mastrangelo
83de77fbe5 Make Native loading work better with Java 8
Motivation:
Enable static linking for Java 8.  These commits are the same as those introduced to netty tcnative.  The goal is to allow lots of JNI libraries to be statically linked together without having conflict `JNI_OnLoad` methods.

Modification:
* add JNI_OnLoad suffixes to enable static linking
* Add static names to the list of libraries that try to be loaded
* Enable compiling with JNI 1.8
* Sort includes

Result:
Enable statically linked JNI code.
2017-06-23 19:42:13 +02:00
Scott Mitchell
1df722f65b kqueue version of 7baef4fbe8 2017-06-23 08:23:40 -07:00
Norman Maurer
b6c27b9f6b Not force to run autoconf and compile multiple times
Motivation:

We should not force autoconf and compile as this will result in multiple executions and so slow down the build.

Modifications:

Remove force declarations

Result:

Faster build of native modules
2017-06-09 20:34:28 +02:00
Norman Maurer
fd67a2354d [maven-release-plugin] prepare for next development iteration 2017-06-08 21:06:24 +02:00
Norman Maurer
3acd5c68ea [maven-release-plugin] prepare release netty-4.1.12.Final 2017-06-08 21:06:01 +02:00
louxiu
3c4dfed08a Fix handle of ByteBuf with multi nioBuffer in EpollDatagramChannel and KQueueDatagramChannel
Motivation:
1. special handling of ByteBuf with multi nioBuffer rather than type of CompositeByteBuf (eg. DuplicatedByteBuf with CompositeByteBuf)
2. EpollDatagramUnicastTest and KQueueDatagramUnicastTest passed because CompositeByteBuf is converted to DuplicatedByteBuf before write to channel
3. uninitalized struct msghdr will raise error

Modifications:
1. isBufferCopyNeededForWrite(like isSingleDirectBuffer in NioDatgramChannel) checks wether a new direct buffer is needed
2. special handling of ByteBuf with multi nioBuffer in EpollDatagramChannel, AbstractEpollStreamChannel, KQueueDatagramChannel, AbstractKQueueStreamChannel and IovArray
3. initalize struct msghdr

Result:
handle of ByteBuf with multi nioBuffer in EpollDatagramChannel and KQueueDatagramChannel are ok
2017-05-26 07:56:34 +02:00
Norman Maurer
2f8fe2af01 Only try to deregister from EventLoop when the native Channel was registered before.
Motivation:

We only can call eventLoop() if we are registered on an EventLoop yet. As we just did this without checking we spammed the log with an error that was harmless.

Modifications:

Check if registered on eventLoop before try to deregister on close.

Result:

Fixes [#6770]
2017-05-24 13:19:18 +02:00
Norman Maurer
61b1165136 Add support to wrap an existing filedescriptor when using native kqueue transport
Motivation:

The native epoll transport allows to wrap an existing filedescriptor, we should support the same in the native kqueue transport.

Modifications:

Add constructors that allow to wrap and existing filedescriptor.

Result:

Featureset of native transports more on par.
2017-05-19 19:34:47 +02:00
Norman Maurer
201d9b6536 Share code that is needed to support shaded native libraries.
Motivation:

For our native libraries in netty we support shading, to have this work on runtime the user needs to set a system property. This code should shared.

Modifications:

Move logic to NativeLbiraryLoader and so share for all native libs.

Result:

Less code duplication and also will work for netty-tcnative out of the box once it support shading
2017-05-19 19:33:21 +02:00
Scott Mitchell
4c6d946fba KQueueSocket#setTrafficClass exceptions
Motivation:
MacOS will throw an error when attempting to set the IP_TOS socket option if IPv6 is available, and also when getting the value for IP_TOS.

Modifications:
- Socket#setTrafficClass and Socket#getTrafficClass should try to use IPv6 first, and check if the error code indicates the protocol is not supported before trying IPv4

Result:
Fixes https://github.com/netty/netty/issues/6741.
2017-05-18 11:26:27 -07:00
Norman Maurer
0db2901f4d [maven-release-plugin] prepare for next development iteration 2017-05-11 16:00:55 +02:00
Norman Maurer
f7a19d330c [maven-release-plugin] prepare release netty-4.1.11.Final 2017-05-11 16:00:16 +02:00
Norman Maurer
9e62c79574 Correctly include all modules during build
Motivation:

To ensure the release plugin works correctly we need to ensure all modules are included during build.

Modification:

- Include all modules
- Skip compilation and tests for native code when not supported but still include the module and build the jar

Result:

Build and release works again
2017-05-11 16:57:14 +02:00
Scott Mitchell
3cc4052963 New native transport for kqueue
Motivation:
We currently don't have a native transport which supports kqueue https://www.freebsd.org/cgi/man.cgi?query=kqueue&sektion=2. This can be useful for BSD systems such as MacOS to take advantage of native features, and provide feature parity with the Linux native transport.

Modifications:
- Make a new transport-native-unix-common module with all the java classes and JNI code for generic unix items. This module will build a static library for each unix platform, and included in the dynamic libraries used for JNI (e.g. transport-native-epoll, and eventually kqueue).
- Make a new transport-native-unix-common-tests module where the tests for the transport-native-unix-common module will live. This is so each unix platform can inherit from these test and ensure they pass.
- Add a new transport-native-kqueue module which uses JNI to directly interact with kqueue

Result:
JNI support for kqueue.
Fixes https://github.com/netty/netty/issues/2448
Fixes https://github.com/netty/netty/issues/4231
2017-05-03 09:53:22 -07:00