Motivation:
While adding support for GRO (b05fdf3ff8) we broke support for IP_RECVORIGDSTADDR when using the native transport. Beside this we also didnt correctly handle IP_RECVORIGDSTADDR when recvmmsg was used.
Modifications:
- Fix support for IP_RECVORIGDSTADDR when using the native epoll transport for normal reads (recvmsg) but also for scattering reads (recvmmsg)
- Remove code from unix code-base as the support is linux specific and we not need the code there anymore
Result:
Fixes https://github.com/netty/netty/issues/11141
Motivation:
As we can supported SegmentedDatagramPacket in multiple native
transports (like in epoll and io_uring) we should just move it to
unix-common so we can share code.
Modification:
- Move SegmentedDatagrampPacket to transport-native-unixu
- Mark the SegmentedDatagramPacket in epoll as deprecated
- Update code to use updated package.
Result:
Possibility of code re-use
Motivation:
LSE (https://mysqlonarm.github.io/ARM-LSE-and-MySQL/) can have a huge performance difference. Let's ensure we use a compiler that can support it.
Modifications:
Update to gc10 when cross-compiling as it supports LSE and enables it by default
Result:
More optimized builds for aarch64
Motivation:
SslHandler owns the responsibility to flush non-application data
(e.g. handshake, renegotiation, etc.) to the socket. However when
TCP Fast Open is supported but the client_hello cannot be written
in the SYN the client_hello may not always be flushed. SslHandler
may not wrap/flush previously written/flushed data in the event
it was not able to be wrapped due to NEED_UNWRAP state being
encountered in wrap (e.g. peer initiated renegotiation).
Modifications:
- SslHandler to flush in channelActive() if TFO is enabled and
the client_hello cannot be written in the SYN.
- SslHandler to wrap application data after non-application data
wrap and handshake status is FINISHED.
- SocketSslEchoTest only flushes when writes are done, and waits
for the handshake to complete before writing.
Result:
SslHandler flushes handshake data for TFO, and previously flushed
application data after peer initiated renegotiation finishes.
Support TCP Fast Open for clients and make SslHandler take advantage
Motivation:
- TCP Fast Open allow us to send a small amount of data along side the initial SYN packet when establishing a TCP connection.
- The TLS Client Hello packet is small enough to fit in there, and is also idempotent (another requirement for using TCP Fast Open), so if we can save a round-trip when establishing TLS connections when using TFO.
Modification:
- Add support for client-side TCP Fast Open for Epoll, and also lowers the Linux kernel version requirements to 3.6.
- When adding the SslHandler to a pipeline, if TCP Fast Open is enabled for the channel (and the channel is not already active) then start the handshake early by writing it to the outbound buffer.
- An important detail to note here, is that the outbound buffer is not flushed at this point, like it would for normal handshakes. The flushing happens later as part of establishing the TCP connection.
Result:
- It is now possible for clients (on epoll) to open connections with TCP Fast Open.
- The SslHandler automatically detects when this is the case, and now send its Client Hello message as part of the initial data in the TCP Fast Open flow when available, saving a round-trip when establishing TLS connections.
Co-authored-by: Colin Godsey <crgodsey@gmail.com>
Motiviation:
We need to ensure we only register the methods for unix-native-common once as otherwise it may have strange side-effects.
Modifications:
- Add extra method that should be called to signal that we need to register the methods. The registration will only happen once.
- Adjust code to make use of it.
Result:
No more problems due incorrect registration of these methods.
Motivation:
This reverts commit 7fb62a93b8 as it broke native loading in some cases due maven dependencies.
Modification:
Revert the commit.
Result:
Native loading works again
Motivation:
netty-jni-util is now also hosted on maven central. Let's use it
Modifications:
Adjust plugins to just unpack netty-jni-util and use it
Result:
Be able to use what is in the maven cache for netty-jni-util
Motivation:
We need to ensure we only register native methods once as otherwise we may end up in an "invalid" state. The problem here was that before it was basically the responsibility the user of transport-native-unix-common to register the methods. This is error prone as there may be multiple users of these on the classpath at the same time.
Modifications:
- Provide a way to init native lib without register the native methods of the provided classes. This is needed to be able to re-use functionality which is exposed to our internal native code
- Use flatten plugin to correctly resolve classifier and so have the correct dependency
- Call Unix.* method to ensure we register the methods correctly once
- Include native lib as well in the native jars of unix-common
Result:
Be able to have multiple artifacts of the classpath that depends on the unix-common. Related to https://github.com/netty/netty-incubator-transport-io_uring/issues/15
Motivation:
https://github.com/netty/netty/pull/10814 did fix a bug where we did try to call memoryAddress() even tho this is not supported. Unfortunally this fix was only applied for one method and so we missed another method which then could throw an exception when we called memoryAddress()
Modifications:
- Also fix the memoryAddress(offset) method.
_ Adjust unit test to also test this.
Result:
Fixes https://github.com/netty/netty/issues/10813 completely.
Motivation:
We should use aarch_64 in our classifier / jni libname on aarch64 as os.detected.arch uses the name. Being non consistent (especially across our different projects) already gave us a lot of trouble in the past.
Let's fix this once for all.
Modifications:
Use aarch_64
Result:
More consistent classifier usage on aarch64
Motivation:
In some enviroments sun.misc.Unsafe is not present. We should support these as well.
Modifications:
Fallback to JNI if we can't directly access the memoryAddress of the buffer.
Result:
Fixes https://github.com/netty/netty/issues/10813
Motivation:
https in xmlns URIs does not work and will let the maven release plugin fail:
```
[INFO] ------------------------------------------------------------------------
[INFO] BUILD FAILURE
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 1.779 s
[INFO] Finished at: 2020-11-10T07:45:21Z
[INFO] ------------------------------------------------------------------------
[ERROR] Failed to execute goal org.apache.maven.plugins:maven-release-plugin:2.5.3:prepare (default-cli) on project netty-parent: Execution default-cli of goal org.apache.maven.plugins:maven-release-plugin:2.5.3:prepare failed: The namespace xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" could not be added as a namespace to "project": The namespace prefix "xsi" collides with an additional namespace declared by the element -> [Help 1]
[ERROR]
```
See also https://issues.apache.org/jira/browse/HBASE-24014.
Modifications:
Use http for xmlns
Result:
Be able to use maven release plugin
Motivation:
We had a lot of duplication in our jni code which was mostly due macros but also related to how we support shading. By using netty-jni-util we can share all the code between netty and netty-tcnative ( and possible other jni based netty projects in the future).
Modifications:
- Use netty-jni-util and re-use its macros / functions
- Remove duplicated code
- Adjust build files
Result:
Less code duplication for JNI
Motivation:
ddebc1027d missed to make Errors.throwConnectException(...) public
Modifications:
Make method public
Result:
Be able to use Errors.throwConnectException(...) from other module
Motivation:
During the last few month we did develop an io_uring based transport which shows very promising performance numbers. To give it more time to bake we will develop it outside of netty in an "incubator" module which will make it clear to users what to expect and also allow us to seperate its release cycle. While the implementation of it is very self contained there are few small adjustments that need to be made in netty itself to allow us to reuse code.
Modifications:
- AbstractChannel: Add method which can be used when a write fails and remove final from one method
- IovArray: Allow to create an IovArray from a ByteBuf instance
- FileDescriptor: Allow to reuse mark close logic via sub-class
Result:
Be able to reuse netty core classes in io_uring incubator repository
Motivation:
It's important to unload all previous registered native methods when there is a failure during loading the native lib. Failing to do so may lead to an "invalid state" and so may segfault the JVM when trying to call a native method that was previous loaded.
This was observed when two versions of netty-tcnative were on the classpath which had different requirements in terms of linking.
Something like this was reported in he hs log:
```
Instructions: (pc=0x0000000116413bf0)
0x0000000116413bd0:
[error occurred during error reporting (printing registers, top of stack, instructions near pc), id 0xb]
Register to memory mapping:
RAX=0x0000000116413bf0 is an unknown value
RBX={method} {0x000000011422e708} 'aprMajorVersion' '()I' in 'io/netty/internal/tcnative/Library'
RCX=0x000000000000000a is an unknown value
RDX=0x000000000000000a is an unknown value
```
Modifications:
- Unregister previous registered native methods on failure
- Unregister previous registered native methods on on unload of the native lib
Result:
No more segfault caused by invalid state when loading of the native lib fails in between. In this case the user will receive an error now like:
Motivation:
HTTP is a plaintext protocol which means that someone may be able
to eavesdrop the data. To prevent this, HTTPS should be used whenever
possible. However, maintaining using https:// in all URLs may be
difficult. The nohttp tool can help here. The tool scans all the files
in a repository and reports where http:// is used.
Modifications:
- Added nohttp (via checkstyle) into the build process.
- Suppressed findings for the websites
that don't support HTTPS or that are not reachable
Result:
- Prevent using HTTP in the future.
- Encourage users to use HTTPS when they follow the links they found in
the code.
Motivation:
In some situations we could have end up calling some functions with NULL parameters which in this case could lead to undefined behavior. All of this would have happened during loading of the native lib.
Modifications:
Add NULL check as guards and return early
Result:
Fix some possible undefined behavior
