Commit Graph

99 Commits

Author SHA1 Message Date
Norman Maurer
19a12fba4c Correctly handle IPV6-mapped-IPV4 addresses in native code when receiving datagrams (#9560)
Motivation:

291f80733a introduced a change to use a byte[] to construct the InetAddress when receiving datagram messages to reduce the overhead. Unfortunally it introduced a regression when handling IPv6-mapped-IPv4 addresses and so produced an IndexOutOfBoundsException when trying to fill the byte[] in native code.

Modifications:

- Correctly use the offset on the pointer of the address.
- Add testcase
- Make tests more robust and include more details when the test fails

Result:

No more IndexOutOfBoundsException
2019-09-11 20:31:50 +02:00
Norman Maurer
acaa29f508 Add support for recvmmsg(...) even with connected datagram channels w… (#9539)
Motivation:

394a1b3485 added support for recvmmsg(...) for unconnected datagram channels, this change also allows to use recvmmsg(...) with connected datagram channels.

Modifications:

- Always try to use recvmmsg(...) if configured to do so
- Adjust unit test to cover it

Result:

Less syscalls when reading datagram packets
2019-09-06 20:59:24 +02:00
Norman Maurer
d57a5f5d4f Correctly handle ipv6 mapped ipv4 addresses when using recvmmsg (#9541)
Motivation:

394a1b3485 introduced the possibility to use recvmmsg(...) but did not correctly handle ipv6 mapped ip4 addresses to make it consistent with other transports.

Modifications:

- Correctly handle ipv6 mapped ipv4 addresses by only copy over the relevant bytes
- Small improvement on how to detect ipv6 mapped ipv4 addresses by using memcmp and not byte by byte compare
- Adjust test to cover this bug

Result:

Correctly handle ipv6 mapped ipv4 addresses
2019-09-06 13:55:35 +02:00
Norman Maurer
b3e6e41384 Add support for recvmmsg when using epoll transport (#9509)
Motivation:

When using datagram sockets which need to handle a lot of packets it makes sense to use recvmmsg to be able to read multiple datagram packets with one syscall.

Modifications:

- Add support for recvmmsg on linux
- Add new EpollChannelOption.MAX_DATAGRAM_PACKET_SIZE
- Add tests

Result:

Fixes https://github.com/netty/netty/issues/8446.
2019-09-03 09:35:21 +02:00
violetagg
a4c9fb7729 Do not cache local/remote address when creating EpollDatagramChannel with InternetProtocolFamily (#9436)
Motivation:

EpollDatagramChannel#localAddress returns wrong information when
EpollDatagramChannel is created with InternetProtocolFamily,
and EpollDatagramChannel#localAddress is invoked BEFORE the actual binding.

This is a regression caused by change
e17ce934da

Modifications:

EpollDatagramChannel() and EpollDatagramChannel(InternetProtocolFamily family)
do not cache local/remote address

Result:

Rebinding on the same address without "reuse port" works
EpollDatagramChannel#localAddress returns correct address
2019-08-11 09:09:26 +02:00
Norman Maurer
9ebb6b6b56 Add testcase to prove that ET semantics for eventFD are correct (#9385)
Motivation:

We recently made a change to use ET for the eventfd and not trigger a read each time. This testcase proves everything works as expected.

Modifications:

Add testcase that verifies thqat the wakeups happen correctly

Result:

More tests
2019-07-17 12:29:10 +02:00
Nick Hill
afbbc11c8f Fix epoll spliceTo file descriptor with offset (#9369)
Motivation

The AbstractEpollStreamChannel::spliceTo(FileDescriptor, ...) methods
take an offset parameter but this was effectively ignored due to what
looks like a typo in the corresponding JNI function impl. Instead it
would always use the file's own native offset.

Modification

- Fix typo in netty_epoll_native_splice0() and offset accounting in
AbstractEpollStreamChannel::SpliceFdTask.
- Modify unit test to include an invocation of the public spliceTo
method using non-zero offset.

Result

spliceTo FD methods work as expected when an offset is provided.
2019-07-16 13:23:36 +02:00
Steve Buzzard
33d1a91083 Added UDP multicast (with caveats: getInterface, getNetworkInterface, block or loopback-mode-disabled operations).
Motivation:

Provide epoll/native multicast to support high load multicast users (we are using it for a high load telecomm app at my day job).

Modification:

Added support for source specific and any source multicast for epoll transport. Some caveats: no support for disabling loop back mode, retrieval of interface and block operation, all of which tend to be less frequently used.

Result:

Provides epoll transport multicast for common use cases.

Co-authored-by: Norman Maurer <norman_maurer@apple.com>
2019-05-25 10:06:13 +02:00
Julien Viet
f85583047e KQueueEventLoop | EpollEventLoop may incorrectly update registration when FD is reused.
Motivation:

The current KQueueEventLoop implementation does not process concurrent domain socket channel registration/unregistration in the order they actual
happen since unregistration are delated by an event loop task scheduling. When a domain socket is closed, it's file descriptor might be reused
quickly and therefore trigger a new channel registration using the same descriptor.

Consequently the KQueueEventLoop#add(AbstractKQueueChannel) method will overwrite the current inactive channels having the same descriptor
and the delayed KQueueEventLoop#remove(AbstractKQueueChannel) will remove the active channel that replaced the inactive one.

As active channels are registered, events for this file descriptor won't be processed anymore and the channels will never be closed.

The same problem can also happen in EpollEventLoop. Beside this we also may never remove the AbstractEpollChannel from the internal map
when it is unregistered which will prevent it from be GC'ed

Modifications:

- Change logic of native KQueue and Epoll implementations to ensure we correctly handle the case of FD reuse
- Only try to update kevent / epoll if the Channel is still open (as otherwise it will be handled by kqueue / epoll itself)
- Correctly remove AbstractEpollChannel from internal map in all cases
- Make implementation of closeAll() consistent for Epoll and KQueueEventLoop

Result:

KQueue and Epoll native transports correctly handle FD reuse

Co-authored-by: Norman Maurer <norman_maurer@apple.com>
2019-05-22 10:11:42 +02:00
Norman Maurer
bbb9ea69e5 Revert "Added UDP multicast (with caveats: no ipv6, getInterface, getNetworkI… (#9006)"
This reverts commit a3e8c86741 as there are some issues that need to be fixed first.
2019-04-12 21:33:25 +02:00
Norman Maurer
9ef5c0946a Add IPv6 multicast test to testsuite (#9037)
Motivation:

We currently only cover ipv4 multicast in the testsuite but we should also have tests for ipv6.

Modifications:

- Add test for ipv6
- Ensure we only try to run multicast test for ipv4 / ipv6 if the loopback interface supports it.

Result:

Better test coverage
2019-04-12 14:26:09 +02:00
Norman Maurer
7c35781f4d
DefaultPromise may throw checked exceptions that are not advertised (#8995)
Motivation:

We should not throw check exceptions when the user calls sync*() but should better wrap it in a CompletionException to make it easier for people to reason about what happens.

Modifications:

- Change sync*() to throw CompletionException
- Adjust tests
- Add some more tests

Result:

Fixes https://github.com/netty/netty/issues/8521.
2019-04-10 07:15:31 +02:00
Steve Buzzard
5e8fdf06bc Added UDP multicast (with caveats: no ipv6, getInterface, getNetworkI… (#9006)
…nterface, block or loopback-mode-disabled operations).


Motivation:

Provide epoll/native multicast to support high load multicast users (we are using it for a high load telecomm app at my day job).

Modification:

Added support for (ipv4 only) source specific and any source multicast for epoll transport. Some caveats (beyond no ipv6 support initially - there’s a bit of work to add in join and leave group specifically around SSM, as ipv6 uses different data structures for this): no support for disabling loop back mode, retrieval of interface and block operation, all of which tend to be less frequently used.

Result:

Provides epoll transport multicast for IPv4 for common use cases. Understand if you’d prefer to hold off until ipv6 is included but not sure when I’ll be able to get to that.
2019-04-08 20:14:07 +02:00
Norman Maurer
0f34345347
Merge ChannelInboundHandler and ChannelOutboundHandler into ChannelHa… (#8957)
Motivation:

In 42742e233f we already added default methods to Channel*Handler and deprecated the Adapter classes to simplify the class hierarchy. With this change we go even further and merge everything into just ChannelHandler. This simplifies things even more in terms of class-hierarchy.

Modifications:

- Merge ChannelInboundHandler | ChannelOutboundHandler into ChannelHandler
- Adjust code to just use ChannelHandler
- Deprecate old interfaces.

Result:

Cleaner and simpler code in terms of class-hierarchy.
2019-03-28 09:28:27 +00:00
Lunfu Zhong
238018e4ea Support ALLOW_HALF_CLOSURE channel option on Unix domain socket. (#8932)
Motivation:

Since DomainSocketChannel is a DuplexChannel,  which be able to shutdown input or output individually on demands, but ALLOW_HALF_CLOSURE channel option has not been supported yet.

I thought this could be a missing feature of Unix domain socket, so here the PR for it.

Modifications:

1. Added allHalfClosure property both in  EpollDomainSocketChannelConfig and KQueueDomainSocketChannelConfig,
2. Enabled isAllowHalfClosure method of native channel to support domain channel config,
3. Created EpollDomainSocketShutdownOutputByPeerTest and KQueueDomainSocketShutdownOutputByPeerTest to verify the change.

Result:

ALLOW_HALF_CLOSURE channel option can be set with DomainSocketChannel, and no more warning of Unknown channel option 'ALLOW_HALF_CLOSURE'.
2019-03-19 11:37:54 +01:00
Norman Maurer
42742e233f
Deprecate ChannelInboundHandlerAdapter and ChannelOutboundHandlerAdapter (#8929)
Motivation:

As we now us java8 as minimum java version we can deprecate ChannelInboundHandlerAdapter / ChannelOutboundHandlerAdapter and just move the default implementations into the interfaces. This makes things a bit more flexible for the end-user and also simplifies the class-hierarchy.

Modifications:

- Mark ChannelInboundHandlerAdapter and ChannelOutboundHandlerAdapter as deprecated
- Add default implementations to ChannelInboundHandler / ChannelOutboundHandler
- Refactor our code to not use ChannelInboundHandlerAdapter / ChannelOutboundHandlerAdapter anymore

Result:

Cleanup class-hierarchy and make things a bit more flexible.
2019-03-13 09:46:10 +01:00
Norman Maurer
b9d277dbcb Support using an Executor to offload blocking / long-running tasks wh… (#8847)
Motivation:

The SSLEngine does provide a way to signal to the caller that it may need to execute a blocking / long-running task which then can be offloaded to an Executor to ensure the I/O thread is not blocked. Currently how we handle this in SslHandler is not really optimal as while we offload to the Executor we still block the I/O Thread.

Modifications:

- Correctly support offloading the task to the Executor while suspending processing of SSL in the I/O Thread
- Add new methods to SslContext to specify the Executor when creating a SslHandler
- Remove @deprecated annotations from SslHandler constructor that takes an Executor
- Adjust tests to also run with the Executor to ensure all works as expected.

Result:

Be able to offload long running tasks to an Executor when using SslHandler. Partly fixes https://github.com/netty/netty/issues/7862 and https://github.com/netty/netty/issues/7020.
2019-02-11 10:00:55 +01:00
Norman Maurer
a2ccc287c3 Add more tests to KQueue and Epoll testsuites. (#8851)
Motivation:

We missed to extend a few tests from the testsuite and so also run these with our native KQueue and Epoll transport.

Modifications:

Extend tests and so run these for our native transports as well.

Result:

More tests.
2019-02-08 20:12:29 +01:00
田欧
6222101924 migrate java8: use lambda and method reference (#8781)
Motivation:

We can use lambdas now as we use Java8.

Modification:

use lambda function for all package, #8751 only migrate transport package.

Result:

Code cleanup.
2019-01-29 14:06:05 +01:00
田欧
e941cbe27a remove unused import statement (#8792)
Motivation:
The code contained some unused import statements.

Modification:
Remove unused import statements.

Result:
Code cleanup
2019-01-28 16:50:15 +01:00
田欧
934a07fbe2 migrate java8 (#8779)
Motivation:

We can omit argument types when using Java8.

Modification:

Omit arguments where possible.

Result:

Cleaner code.
2019-01-28 05:55:30 +01:00
Norman Maurer
310f31b392
Update to new checkstyle plugin (#8777)
Motivation:

We need to update to a new checkstyle plugin to allow the usage of lambdas.

Modifications:

- Update to new plugin version.
- Fix checkstyle problems.

Result:

Be able to use checkstyle plugin which supports new Java syntax.
2019-01-24 16:24:19 +01:00
Norman Maurer
3d6e6136a9
Decouple EventLoop details from the IO handling for each transport to… (#8680)
* Decouble EventLoop details from the IO handling for each transport to allow easy re-use of code and customization

Motiviation:

As today extending EventLoop implementations to add custom logic / metrics / instrumentations is only possible in a very limited way if at all. This is due the fact that most implementations are final or even package-private. That said even if these would be public there are the ability to do something useful with these is very limited as the IO processing and task processing are very tightly coupled. All of the mentioned things are a big pain point in netty 4.x and need improvement.

Modifications:

This changeset decoubled the IO processing logic from the task processing logic for the main transport (NIO, Epoll, KQueue) by introducing the concept of an IoHandler. The IoHandler itself is responsible to wait for IO readiness and process these IO events. The execution of the IoHandler itself is done by the SingleThreadEventLoop as part of its EventLoop processing. This allows to use the same EventLoopGroup (MultiThreadEventLoupGroup) for all the mentioned transports by just specify a different IoHandlerFactory during construction.

Beside this core API change this changeset also allows to easily extend SingleThreadEventExecutor / SingleThreadEventLoop to add custom logic to it which then can be reused by all the transports. The ideas are very similar to what is provided by ScheduledThreadPoolExecutor (that is part of the JDK). This allows for example things like:

  * Adding instrumentation / metrics:
    * how many Channels are registered on an SingleThreadEventLoop
    * how many Channels were handled during the IO processing in an EventLoop run
    * how many task were handled during the last EventLoop / EventExecutor run
    * how many outstanding tasks we have
    ...
    ...
  * Implementing custom strategies for choosing the next EventExecutor / EventLoop to use based on these metrics.
  * Use different Promise / Future / ScheduledFuture implementations
  * decorate Runnable / Callables when submitted to the EventExecutor / EventLoop

As a lot of functionalities are folded into the MultiThreadEventLoopGroup and SingleThreadEventLoopGroup this changeset also removes:

  * AbstractEventLoop
  * AbstractEventLoopGroup
  * EventExecutorChooser
  * EventExecutorChooserFactory
  * DefaultEventLoopGroup
  * DefaultEventExecutor
  * DefaultEventExecutorGroup

Result:

Fixes https://github.com/netty/netty/issues/8514 .
2019-01-23 08:32:05 +01:00
田欧
9d62deeb6f Java 8 migration: Use diamond operator (#8749)
Motivation:

We can use the diamond operator these days.

Modification:

Use diamond operator whenever possible.

Result:

More modern code and less boiler-plate.
2019-01-22 16:07:26 +01:00
Norman Maurer
a4d1e97987 Fix compile error introduced by incorrect cherry-pick of 7a613c2131 2019-01-21 09:30:52 +01:00
yulianoifa-mobius
7a613c2131 Allowed IP_FREEBIND option for UDP epoll (#8728)
Motivation:

While using Load Balancers or HA support is needed there are cases when UDP channel need to bind to IP Address which is not available on network interfaces locally.

Modification:

Modified EpollDatagramChannelConfig to allow IP_FREEBIND option

Result:

Fixes ##8727.
2019-01-21 07:42:36 +01:00
Norman Maurer
c10ccc5dec
Tighten contract between Channel and EventLoop by require the EventLoop on Channel construction. (#8587)
Motivation:

At the moment it’s possible to have a Channel in Netty that is not registered / assigned to an EventLoop until register(...) is called. This is suboptimal as if the Channel is not registered it is also not possible to do anything useful with a ChannelFuture that belongs to the Channel. We should think about if we should have the EventLoop as a constructor argument of a Channel and have the register / deregister method only have the effect of add a Channel to KQueue/Epoll/... It is also currently possible to deregister a Channel from one EventLoop and register it with another EventLoop. This operation defeats the threading model assumptions that are wide spread in Netty, and requires careful user level coordination to pull off without any concurrency issues. It is not a commonly used feature in practice, may be better handled by other means (e.g. client side load balancing), and therefore we propose removing this feature.

Modifications:

- Change all Channel implementations to require an EventLoop for construction ( + an EventLoopGroup for all ServerChannel implementations)
- Remove all register(...) methods from EventLoopGroup
- Add ChannelOutboundInvoker.register(...) which now basically means we want to register on the EventLoop for IO.
- Change ChannelUnsafe.register(...) to not take an EventLoop as parameter (as the EventLoop is supplied on custruction).
- Change ChannelFactory to take an EventLoop to create new Channels and introduce ServerChannelFactory which takes an EventLoop and one EventLoopGroup to create new ServerChannel instances.
- Add ServerChannel.childEventLoopGroup()
- Ensure all operations on the accepted Channel is done in the EventLoop of the Channel in ServerBootstrap
- Change unit tests for new behaviour

Result:

A Channel always has an EventLoop assigned which will never change during its life-time. This ensures we are always be able to call any operation on the Channel once constructed (unit the EventLoop is shutdown). This also simplifies the logic in DefaultChannelPipeline a lot as we can always call handlerAdded / handlerRemoved directly without the need to wait for register() to happen.

Also note that its still possible to deregister a Channel and register it again. It's just not possible anymore to move from one EventLoop to another (which was not really safe anyway).

Fixes https://github.com/netty/netty/issues/8513.
2019-01-14 20:11:13 +01:00
Norman Maurer
d4b1202e62
Add testcase for epollWait(...) with negative timerfd values. (#8447)
Motivation:

https://github.com/netty/netty/issues/8444 reports that there is some issue with negative values passed to timerfd_settime. This test verifies that everything is working as expected.

Modifications:

Add testcase.

Result:

Test to verify expected behaviour.
2018-10-30 19:38:02 +01:00
Johno Crawford
5b3b8db07f epoll_wait produces an EINVAL error since 4.1.30 (#8350)
Motivation:

epoll_wait should work in 4.1.30 like it did in 4.1.29.

Modifications:

Revert Integer.MAX_VALUE back to MAX_SCHEDULED_TIMERFD_NS (999,999,999).
Add unit test.

Result:

epoll_wait will no longer throw EINVAL.
2018-10-12 05:02:41 +02:00
Matteo Merli
3a96e7373b Added option to do busy-wait on epoll (#8267)
Motivation:

Add an option (through a SelectStrategy return code) to have the Netty event loop thread to do busy-wait on the epoll.

The reason for this change is to avoid the context switch cost that comes when the event loop thread is blocked on the epoll_wait() call.

On average, the context switch has a penalty of ~13usec.

This benefits both:

The latency when reading from a socket
Scheduling tasks to be executed on the event loop thread.
The tradeoff, when enabling this feature, is that the event loop thread will be using 100% cpu, even when inactive.

Modification:

Added SelectStrategy option to return BUSY_WAIT
Epoll loop will do a epoll_wait() with no timeout
Use pause instruction to hint to processor that we're in a busy loop
Result:

When enabled, minimizes impact of context switch in the critical path
2018-09-28 22:52:00 +02:00
Scott Mitchell
12f6500a4f Epoll and Kqueue shouldn't read by default (#8024)
Motivation:
Epoll and Kqueue channels have internal state which forces
a single read operation after channel construction. This
violates the Channel#read() interface which indicates that
data shouldn't be delivered until this method is called.
The behavior is also inconsistent with the NIO transport.

Modifications:
- Epoll and Kqueue shouldn't unconditionally read upon
initialization, and instead should rely upon Channel#read()
or auto_read.

Result:
Epoll and Kqueue are more consistent with NIO.
2018-06-15 10:28:50 +02:00
Norman Maurer
d133bf06a4
Allow to schedule tasks up to Long.MAX_VALUE (#7972)
Motivation:

We should allow to schedule tasks with a delay up to Long.MAX_VALUE as we did pre 4.1.25.Final.

Modifications:

Just ensure we not overflow and put the correct max limits in place when schedule a timer. At worse we will get a wakeup to early and then schedule a new timeout.

Result:

Fixes https://github.com/netty/netty/issues/7970.
2018-05-30 11:11:42 +02:00
Devrim Şahin
b818852cdb Update DatagramPacket.recipient() to return the actual destination IP (#7879)
Motivation:

DatagramPacket.recipient() doesn't return the actual destination IP, but the IP the app is bound to.

Modification:

- IP_RECVORIGDSTADDR option is enabled for UDP sockets, which allows retrieval of ancillary information containing the original recipient.
- _recvFrom(...) function from transport-native-unix-common/src/main/c/netty_unix_socket.c is modified such that if IP_RECVORIGDSTADDR is set, recvmsg is used instead of recvfrom; enabling the retrieval of the original recipient.
- DatagramSocketAddress also contains a 'local' address, representing the recipient.
- EpollDatagramChannel is updated to return the retrieved recipient address instead of the address the channel is bound to.

Result:

Fixes #4950.
2018-04-26 08:00:36 +02:00
Norman Maurer
b47fb81799
EventLoop.schedule with big delay fails (#7402)
Motivation:

Using a very huge delay when calling schedule(...) may cause an Selector error when calling select(...) later on. We should gaurd against such a big value.

Modifications:

- Add guard against a very huge value.
- Added tests.

Result:

Fixes [#7365]
2018-04-24 11:15:20 +02:00
Scott Mitchell
ce241bd11e Epoll flush/writabilityChange deadlock
Motivation:
b215794de3 recently introduced a change in behavior where writeSpinCount provided a limit for how many write operations were attempted per flush operation. However when the write quantum was meet the selector write flag was not cleared, and the channel unsafe flush0 method has an optimization which prematurely exits if the write flag is set. This may lead to no write progress being made under the following scenario:
- flush is called, but the socket can't accept all data, we set the write flag
- the selector wakes us up because the socket is writable, we write data and use the writeSpinCount quantum
- we then schedule a flush() on the EventLoop to execute later, however it the flush0 optimization prematurely exits because the write flag is still set

In this scenario the socket is still writable so the EventLoop may never notify us that the socket is writable, and therefore we may never attempt to flush data to the OS.

Modifications:
- When the writeSpinCount quantum is exceeded we should clear the selector write flag

Result:
Fixes https://github.com/netty/netty/issues/7729
2018-02-20 11:40:58 +01:00
Scott Mitchell
33ddb83dc1
IovArray#add return value resulted in more ByteBufs being added during iteration
Motivation:
IovArray implements MessageProcessor, and the processMessage method will continue to be called during iteration until it returns true. A recent commit b215794de3 changed the return value to only return true if any component of a CompositeByteBuf was added as a result of the method call. However this results in the iteration continuing, and potentially subsequent smaller buffers maybe added, which will result in out of order writes and generally corrupts data.

Modifications:
- IovArray#add should return false so that the MessageProcessor#processMessage will stop iterating.

Result:
Native transports which use IovArray will not corrupt data during gathering writes of CompositeByteBuf objects.
2018-01-04 08:04:32 -08:00
Scott Mitchell
af2f343648
FileDescriptor writev core dump
Motivation:
FileDescriptor#writev calls JNI code, and that JNI code dereferences a NULL pointer which crashes the application. This occurs when writing a single CompositeByteBuf object with more than one component.

Modifications:
- Initialize the iovec iterator properly to avoid the core dump
- Fix the array length calculation if we aren't able to fit all the ByteBuffer objects in the iovec array

Result:
No more core dump.
2017-12-14 16:47:31 -08:00
Norman Maurer
f115bf50cb EpollSocketChannelConfig.getOptions() must not throw if TCP_FASTOPEN_CONNECT is not supported
Motivation:

If a user calls EpollSocketChannelConfig.getOptions() and TCP_FASTOPEN_CONNECT is not supported we throw an exception.

Modifications:

- Just return 0 if ENOPROTOOPT is set.
- Add testcase

Result:

getOptions() works as epxected.
2017-11-16 14:07:54 +01:00
Idel Pivnitskiy
50a067a8f7 Make methods 'static' where it possible
Motivation:

Even if it's a super micro-optimization (most JVM could optimize such
 cases in runtime), in theory (and according to some perf tests) it
 may help a bit. It also makes a code more clear and allows you to
 access such methods in the test scope directly, without instance of
 the class.

Modifications:

Add 'static' modifier for all methods, where it possible. Mostly in
test scope.

Result:

Cleaner code with proper 'static' modifiers.
2017-10-21 14:59:26 +02:00
Norman Maurer
aa8bdb5d6b Fix assertion error when closing / shutdown native channel and SO_LINGER is set.
Motivation:

When SO_LINGER is used we run doClose() on the GlobalEventExecutor by default so we need to ensure we schedule all code that needs to be run on the EventLoop on the EventLoop in doClose. Beside this there are also threading issues when calling shutdownOutput(...)

Modifications:

- Schedule removal from EventLoop to the EventLoop
- Correctly handle shutdownOutput and shutdown in respect with threading-model
- Add unit tests

Result:

Fixes [#7159].
2017-09-18 14:46:37 -07:00
Scott Mitchell
1d7c3fb7ee KQueue detect peer close without EVFILT_READ
Motivation:
The EPOLL transport uses EPOLLRDHUP to detect when the peer closes the write side of the socket. Currently KQueue is not able to mimic this behavior and the only way to detect if the peer has closed is to read. It may not always be appropriate to read for backpressure and other reasons at the application level.

Modifications:
- Support EVFILT_SOCK filter which provides notification when the peer closes the socket

Result:
KQueue transport has more consistent behavior with Epoll transport for detecting peer closure.
2017-08-18 11:00:18 -07:00
Norman Maurer
4bb89dcc54 Correctly handle connect/disconnect in EpollDatagramChannel / KQueueDatagramChannel
Motivation:

We did not correctly handle connect() and disconnect() in EpollDatagramChannel / KQueueDatagramChannel and so the behavior was different compared to NioDatagramChannel.

Modifications:

- Correct implement connect and disconnect methods
- Share connect and related code
- Add tests

Result:

EpollDatagramChannel / KQueueDatagramChannel also supports correctly connect() and disconnect() methods.
2017-08-04 09:22:53 +02:00
Norman Maurer
3cdff36821 Update tests to not use TestUtils.getFreePort() and so ensure we not try to use a port that is used by the system in the meantime.
Motivation:

We should not try to detect a free port in tests put just use 0 when bind so there is no race in which the system my bind something to the port we choosen before.

Modifications:

- Remove the usage of TestUtils.getFreePort() in the testsuite
- Remove hack to workaround bind errors which will not happen anymore now

Result:

Less flacky tests.
2017-07-20 08:25:37 +02:00
Norman Maurer
e6a399a778 Explicit specify hostaddress during tests to ensure testsuite pass on docker (mac)
Motivation:

When run the current testsuite on docker (mac) it will fail a few tests with:

io.netty.channel.AbstractChannel$AnnotatedConnectException: connect(..) failed: Cannot assign requested address: /0:0:0:0:0:0:0:0%0:46607
Caused by: java.net.ConnectException: connect(..) failed: Cannot assign requested address

Modifications:

Specify host explicit as done in other tests to only use ipv6 when really supported.

Result:

Build pass on docker as well
2017-07-18 07:24:04 +02:00
Norman Maurer
2f8fe2af01 Only try to deregister from EventLoop when the native Channel was registered before.
Motivation:

We only can call eventLoop() if we are registered on an EventLoop yet. As we just did this without checking we spammed the log with an error that was harmless.

Modifications:

Check if registered on eventLoop before try to deregister on close.

Result:

Fixes [#6770]
2017-05-24 13:19:18 +02:00
Scott Mitchell
4c6d946fba KQueueSocket#setTrafficClass exceptions
Motivation:
MacOS will throw an error when attempting to set the IP_TOS socket option if IPv6 is available, and also when getting the value for IP_TOS.

Modifications:
- Socket#setTrafficClass and Socket#getTrafficClass should try to use IPv6 first, and check if the error code indicates the protocol is not supported before trying IPv4

Result:
Fixes https://github.com/netty/netty/issues/6741.
2017-05-18 11:26:27 -07:00
Scott Mitchell
3cc4052963 New native transport for kqueue
Motivation:
We currently don't have a native transport which supports kqueue https://www.freebsd.org/cgi/man.cgi?query=kqueue&sektion=2. This can be useful for BSD systems such as MacOS to take advantage of native features, and provide feature parity with the Linux native transport.

Modifications:
- Make a new transport-native-unix-common module with all the java classes and JNI code for generic unix items. This module will build a static library for each unix platform, and included in the dynamic libraries used for JNI (e.g. transport-native-epoll, and eventually kqueue).
- Make a new transport-native-unix-common-tests module where the tests for the transport-native-unix-common module will live. This is so each unix platform can inherit from these test and ensure they pass.
- Add a new transport-native-kqueue module which uses JNI to directly interact with kqueue

Result:
JNI support for kqueue.
Fixes https://github.com/netty/netty/issues/2448
Fixes https://github.com/netty/netty/issues/4231
2017-05-03 09:53:22 -07:00
Scott Mitchell
a1b5b5dcca EpollRecvByteAllocatorHandle doesn't inform delegate of more data
Motivation:
EpollRecvByteAllocatorHandle intends to override the meaning of "maybe more data to read" which is a concept also used in all existing implementations of RecvByteBufAllocator$Handle but the interface doesn't support overriding. Because the interfaces lack the ability to propagate this computation EpollRecvByteAllocatorHandle attempts to implement a heuristic on top of the delegate which may lead to reading when we shouldn't or not reading data.

Modifications:
- Create a new interface ExtendedRecvByteBufAllocator and ExtendedHandle which allows the "maybe more data to read" between interfaces
- Deprecate RecvByteBufAllocator and change all existing implementations to extend ExtendedRecvByteBufAllocator
- transport-native-epoll should require ExtendedRecvByteBufAllocator so the "maybe more data to read" can be propagated to the ExtendedHandle

Result:
Fixes https://github.com/netty/netty/issues/6303.
2017-02-13 17:42:24 -08:00
Norman Maurer
d3cb95ef00 Make NIO and EPOLL transport connect errors more consistent with the JDK
Motivation:

The NIO transport used an IllegalStateException if a user tried to issue another connect(...) while the connect was still in process. For this case the JDK specified a ConnectPendingException which we should use. The same issues exists in the EPOLL transport. Beside this the EPOLL transport also does not throw the right exceptions for ENETUNREACH and EISCONN errno codes.

Modifications:

- Replace IllegalStateException with ConnectPendingException in NIO and EPOLL transport
- throw correct exceptions for ENETUNREACH and EISCONN in EPOLL transport
- Add test case

Result:

More correct error handling for connect attempts when using NIO and EPOLL transport
2016-08-27 20:57:36 +02:00
Norman Maurer
2c1f17faa2 Throw correct NotYetConnectedException when ENOTCONN errno is set
Motivation:

We should throw a NotYetConnectedException when ENOTCONN errno is set. This is also consistent with NIO.

Modification:

Throw correct exception and add test case

Result:

More correct and consistent behavior.
2016-08-24 07:41:24 +02:00