Motivation:
We should only try to use reflection to access default nameservers when using Java8 and lower as otherwise we will produce an Illegal reflective access warning like:
WARNING: Illegal reflective access by io.netty.resolver.dns.DefaultDnsServerAddressStreamProvider
Modifications:
Add Java version check before try to use reflective access.
Result:
No more warning when Java9+ is used.
Motivation:
OOME is occurred by increasing suppressedExceptions because other libraries call Throwable#addSuppressed. As we have no control over what other libraries do we need to ensure this can not lead to OOME.
Modifications:
Only use static instances of the Exceptions if we can either dissable addSuppressed or we run on java6.
Result:
Not possible to OOME because of addSuppressed. Fixes https://github.com/netty/netty/issues/9151.
Motivation:
Sometimes DNS responses can be very large which mean they will not fit in a UDP packet. When this is happening the DNS server will set the TC flag (truncated flag) to tell the resolver that the response was truncated. When a truncated response was received we should allow to retry via TCP and use the received response (if possible) as a replacement for the truncated one.
See https://tools.ietf.org/html/rfc7766.
Modifications:
- Add support for TCP fallback by allow to specify a socketChannelFactory / socketChannelType on the DnsNameResolverBuilder. If this is set to something different then null we will try to fallback to TCP.
- Add decoder / encoder for TCP
- Add unit tests
Result:
Support for TCP fallback as defined by https://tools.ietf.org/html/rfc7766 when using DnsNameResolver.
Motivation:
Depending on what OpenSSL library version we use / system property that is set we need to skip tests that use KeyManagerFactory.
Modifications:
Add missing assume checks for tests that use KeyManagerFactory.
Result:
All tests pass even if KeyManagerFactory is not supported
Motivation:
Previously, any 'relative' pipeline operations, such as
ctx.pipeline().replace(), .addBefore(), addAfter(), etc
would fail as the handler was not present in the pipeline.
Modification:
Used the pattern from ChannelInitializer when invoking configurePipeline().
Result:
Fixes#9131
Motivation
@xiaoheng1 reported incorrect behaviour of AsciiString.lastIndexOf in
#9099. Upon closer inspection it appears that it was never implemented
correctly and searches between the provided index and the end of the
string similar to indexOf(...), rather than between the provided index
and the beginning of the string as the javadoc states (and in line with
java.lang.String).
Modifications
Fix AsciiString.lastIndexOf implementation and corresponding unit tests
to behave the same as the equivalent String methods.
Result
Fixes#9099
* Fix incorrect behavior of ReadOnlyByteBufferBuf.getBytes(int,ByteBuffer)
Motivation
It currently will succeed when the destination is larger than the source
range, but the ByteBuf javadoc states this should be a failure, as is
the case with all the other implementations.
Modifications
- Fix logic to fail the bounds check in this case
- Remove explicit null check which isn't done in any equivalent method
- Add unit test
Result
More correct/consistent behaviour
Motivation:
https://github.com/netty/netty/pull/9021 did apply some changes to filter out duplicates InetAddress when calling resolveAll(...) to mimic JDK behaviour. Unfortunally this also introduced a regression as we should not filter duplicates when the user explicit calls resolveAll(DnsQuestion).
Modifications:
- Only filter duplicates if resolveAll(String) is used
- Add unit test
Result:
Fixes regressions introduces by https://github.com/netty/netty/pull/9021
Motivation:
As brought up in https://github.com/netty/netty/issues/8998, JKS can be substantially faster than pkcs12, JDK's new default. Without an option to set the KeyStore type you must change the configuration of the entire JVM which is impractical.
Modification:
- Allow to specify KeyStore type
- Add test case
Result:
Fixes https://github.com/netty/netty/issues/8998.
Motivation:
075cf8c02e introduced a change to allow resolve(...) to notify as soon as the preferred record was resolved. This works great but we should also allow the user to configure that we want to do the same for resolveAll(...), which means we should be able to notify as soon as all records for a preferred record were resolved.
Modifications:
- Add a new DnsNameResolverBuilder method to allow configure this (use false as default to not change default behaviour)
- Add unit test
Result:
Be able to speed up resolving.
Motivation:
HttpHelloWorldServer example works incorrect for HTTP 1.1, the value of header connection is always set to close for each request.
Modification:
Correctly set header
Result:
Fixed HttpHelloWorldServerHandler for handling HTTP 1.0/1.1
Motivation:
An instance is always equal to itself. It makes sense to skip processing for this case, which isn't uncommon since `AsciiString` is often memoized within an application when used as HTTP header names.
Modification:
`contentEquals` methods first check for instance equality before doing processing.
Result:
`contentEquals` will be faster when comparing an instance with itself.
I couldn't find any unit tests for these methods, only the static version. Let me know if I should add something to `AsciiStringCharacterTest`.
Came up here:
https://github.com/line/armeria/pull/1731#discussion_r280396280
Motivation:
While building netty-all we should always include all classes for native transports no matter if the native part can be build or not. This was it is easier to test locally with a installed snapshot of netty-all when the code that uses it does enable a specific native transport depending on if the native bits can be loaded or not.
Modifications:
Always include classes of native transports no matter on which platfrom we build. When a release is done we ensure we include the native bits by using the uber-staging profile.
Result:
Easier testing with netty-all snapshots.
Motivation:
Bootstrap allows you to set a localAddress for outbound TCP connections, either via the Bootstrap.localAddress(localAddress) or Bootstrap.connect(remoteAddress, localAddress) methods. This works well if you want to bind to just one IP address on an interface. Sometimes you want to bind to a specific address based on the resolved remote address which should be possible.
Modifications:
Add DynamicAddressConnectHandler and tests
Result:
Fixes https://github.com/netty/netty/issues/8940.
Motivation:
Subclasses of `OpenSslKeyMaterial` implement `ReferenceCounted`. This means that a new object should have an initial refcount of 1. An `OpenSslPrivateKey.OpenSslPrivateKeyMaterial` object shares its refcount with the enclosing `OpenSslPrivateKey` object. This means the enclosing object's refcount must be incremented by 1 when an instance of `OpenSslPrivateKey.OpenSslPrivateKeyMaterial` is created. Otherwise, when the key material object is `release()`-ed, the refcount on the enclosing object will drop to 0 while it is still in use.
Modification:
- Increment the refcount in the constructor of `OpenSslPrivateKey.OpenSslPrivateKeyMaterial`
- Ensure we also always release the native certificates as well.
Result:
Refcount is now correct.
Motivation:
Http2MultiplexCodec.DefaultHttp2StreamChannel currently only act on ClosedChannelException exceptions when checking for isAutoClose(). We should widen the scope here to IOException to be more consistent with AbstractChannel.
Modifications:
Replace instanceof ClosedChannelException with instanceof IOException
Result:
More consistent handling of isAutoClose()
Motivation:
When trying to use graalvm and build netty we currently fail because our build configuration is not compatible with it.
Modification:
- Skip plugins that are not supported when graal is used
- Correctly configure surefire plugin for graal so it not produces a NPE
Result:
We can build and test with graalvm.
Motivation:
GraalVM native images are a new way to deliver java applications. Netty is one of the most popular libraries however there are a few limitations that make it impossible to use with native images out of the box. Adding a few metadata (in specific modules will allow the compilation to success and produce working binaries)
Modification:
Added properties files in `META-INF` and substitutions classes (under `internal.svm`) will solve the compilation issues. The substitutions classes are not visible and do not have a public constructor so they are not visible to end users.
Result:
Fixes#8959
This fix is very conservative as it applies the minimum config required to build:
* pure netty servers
* vert.x applications
* grpc applications
The build is having trouble due to checkstyle which does not seem to be able to find the copyright notice on property files.
Motivation:
We should try to compile / test with graalvm as well.
Modifications:
Add docker-compose file for graalvm
Result:
Be able to also compile / test with graalvm
Motivation:
In GlobalEventExecutorTest we used Thread.sleep(...) which can produce flaky results (as seen on the CI). We should use another alternative during tests.
Modifications:
Replace Thread.sleep(...) with join()
Result:
No more flaky GlobalEventExecutor tests.
Motivation:
There were new releases of various Java versions.
Modifications:
Adjust used java versions of the latest releases and so use these on our CI
Result:
Use latest java versions on our CI.
Motivation:
While OpenSslPrivateKeyMethod.* should never return null we should still guard against it to prevent any possible segfault.
Modifications:
- Throw SignatureException if null is returned
- Add unit test
Result:
No segfault when user returns null.
Motivation:
Http2ConnectionHandler#close(..) always runs the GOAWAY and graceful close
logic. This coupling means that a user would have to override
Http2ConnectionHandler#close(..) to modify the behavior, and the
Http2FrameCodec and Http2MultiplexCodec are not extendable so you cannot
override at this layer. Ideally we can totally decouple the close(..) of the
transport and the GOAWAY graceful closure process completely, but to preserve
backwards compatibility we can add an opt-out option to decouple where the
application is responsible for sending a GOAWAY with error code equal to
NO_ERROR as described in https://tools.ietf.org/html/rfc7540#section-6.8 in
order to initiate graceful close.
Modifications:
- Http2ConnectionHandler supports an additional boolean constructor argument to
opt out of close(..) going through the graceful close path.
- Http2FrameCodecBuilder and Http2MultiplexCodec expose
gracefulShutdownTimeoutMillis but do not hook them up properly. Since these
are already exposed we should hook them up and make sure the timeout is applied
properly.
- Http2ConnectionHandler's goAway(..) method from Http2LifecycleManager should
initiate the graceful closure process after writing a GOAWAY frame if the error
code is NO_ERROR. This means that writing a Http2GoAwayFrame from
Http2FrameCodec will initiate graceful close.
Result:
Http2ConnectionHandler#close(..) can now be decoupled from the graceful close
process, and immediately close the underlying transport if desired.
Motivaiton:
DefaultHttp2ConnectionEncoder uses SimpleChannelPromiseAggregator to combine two
operations into a single future status. However it directly uses the
SimpleChannelPromiseAggregator object instead of using the newPromise() method
in one case. This may result in premature completion of the aggregated future.
Modifications:
- DefaultHttp2ConnectionEncoder to use
SimpleChannelPromiseAggregator#newPromise() instead of directly using the
SimpleChannelPromiseAggregator instance when writing the settings ACK frame
Result:
More correct status for the SETTING ACK frame writing when auto settings ACK is
disabled.
Motivation:
The HTTP/2 codec will synchronously respond to a SETTINGS frame with a SETTINGS
ACK before the application sees the SETTINGS frame. The application may need to
adjust its state depending upon what is in the SETTINGS frame before applying
the remote settings and responding with an ACK (e.g. to adjust for max
concurrent streams). In order to accomplish this the HTTP/2 codec should allow
for the application to opt-in to sending the SETTINGS ACK.
Modifications:
- DefaultHttp2ConnectionDecoder should support a mode where SETTINGS frames can
be queued instead of immediately applying and ACKing.
- DefaultHttp2ConnectionEncoder should attempt to poll from the queue (if it
exists) to apply the earliest received but not yet ACKed SETTINGS frame.
- AbstractHttp2ConnectionHandlerBuilder (and sub classes) should support a new
option to enable the application to opt-in to managing SETTINGS ACK.
Result:
HTTP/2 allows for asynchronous SETTINGS ACK managed by the application.
Motivation
The optimization in #8988 didn't correctly handle the specific case
where the channel hasDisconnect == false, and a
ChannelOutboundHandlerAdapter subclass overrides only the close(ctx,
promise) method without also overriding the disconnect(ctx, promise)
method.
Modifications
Adjust AbstractChannelHandler.disconnect(...) method to divert to
close(...) in !hasDisconnect case before computing target context for
the event.
Result
Fixes#9092
Motivation:
DefaultHeaders entries maintains two linked lists. 1 for overall insertion order
and 1 for "in bucket" order. DefaultHeaders#valueIterator removal (introduced in 1d9090aab2) only reliably
removes the entry from the overall insertion order, but may not remove from the
bucket unless the element is the first entry.
Modifications:
- DefaultHeaders$ValueIterator should track 2 elements behind the next entry so
that the single linked "in bucket" list can be patched up when removing the
previous entry.
Result:
More correct DefaultHeaders#valueIterator removal.
Motivation:
Http2FrameCodec currently fails the write promise associated with creating a
stream with a Http2NoMoreStreamIdsException. However this means the user code
will have to listen to all write futures in order to catch this scenario which
is the same as receiving a GOAWAY frame. We can also simulate receiving a GOAWAY
frame from our remote peer and that allows users to consolidate graceful close
logic in the GOAWAY processing.
Modifications:
- Http2FrameCodec should simulate a DefaultHttp2GoAwayFrame when trying to
create a stream but the stream IDs have been exhausted.
Result:
Applications can rely upon GOAWAY for graceful close processing instead of also
processing write futures.
Motivation:
SmtpRequestEncoderTest#testThrowsIfContentExpected has a ByteBuf leak.
Modifications:
- SmtpRequestEncoderTest#testThrowsIfContentExpected should release buffers in a finally block
Result:
No more leaks in SmtpRequestEncoderTest#testThrowsIfContentExpected.
Motivation
These aren't needed, only one field from each class is used. It also showed as an ambiguous identifier compilation error in my IDE even though javac is obviously fine with it.
Modifications
Static-import explicit ChannelOption fields in EpollDomainSocketChannelConfig instead of using .* wildcard.
Result
Cleaner / more consistent code.
Motivation:
1f93bd3 introduced a regression that could lead to not have the lastAccessed field correctly null'ed out when the endOffset of the internal Component == CompositeByteBuf.readerIndex()
Modifications:
- Correctly null out the lastAccessed field in any case
- Add unit tests
Result:
Fixes regression in CompositeByteBuf.discard*ReadBytes()
Motivation:
While iterating values it is often desirable to be able to remove individual
entries. The existing mechanism to do this involves removal of all entries and
conditional re-insertion which is heavy weight in order to remove a single
value.
Modifications:
- DefaultHeaders$ValueIterator supports removal
Result:
It is possible to remove entries while iterating the values in DefaultHeaders.
Motivation
These implementations delegate most of their methods to an existing Handle and previously extended RecvByteBufAllocator.DelegatingHandle. This was reverted in #6322 with the introduction of ExtendedHandle but it's not clear to me why it needed to be - the code looks a lot cleaner.
Modifications
Have (Epoll|KQueue)RecvByteAllocatorHandle extend DelegatingHandle again, while still implementing ExtendedHandle.
Result
Less code.
Motivation:
At the moment resolve(...) does just delegate to resolveAll(...) and so will only notify the future once all records were resolved. This is wasteful as we are only interested in the first record anyway. We should notify the promise as soon as one record that matches the preferred record type is resolved.
Modifications:
- Introduce DnsResolveContext.isCompleteEarly(...) to be able to detect once we should early notify the promise.
- Make use of this early detecting if resolve(...) is called
- Remove FutureListener which could lead to IllegalReferenceCountException due double releases
- add unit test
Result:
Be able to notify about resolved host more quickly.
Motivation:
We did not correctly calculate the new ttl as we did forget to add `this.`
Modifications:
Add .this and so correctly calculate the TTL
Result:
Use correct TTL for authoritative nameservers when updating these.
Motivation:
86dd388637 reverted the usage of IPv6 Multicast test. This commit makes the whole multicast testing a lot more robust by selecting the correct interface in any case and also reverts the `@Ignore`
Modifications:
- More robust multicast testing by selecting the right NetworkInterface
- Remove the `@Ignore` again for the IPv6 test
Result:
More robust multicast testing
Motivation:
Results are just wrong for small delays.
Modifications:
Switching to AvarageTime avoid to rely on OS nanoTime granularity.
Result:
Uncontended low delay results are not reliable
Motivation:
To closely mimic what the JDK does we should not try to resolve AAAA records if the system itself does not support IPv6 at all as it is impossible to connect to this addresses later on. In this case we need to use ResolvedAddressTypes.IPV4_ONLY.
Modifications:
Add static method to detect if IPv6 is supported and if not use ResolvedAddressTypes.IPV4_ONLY.
Result:
More consistent behaviour between JDK and our resolver implementation.
Motivation:
At the moment we basically drop all non prefered addresses when calling DnsNameResolver.resolveAll(...). This is just incorrect and was introduced by 4cd39cc4b3. More correct is to still retain these but sort the returned List to have the prefered addresses on the beginning of the List. This also ensures resolve(...) will return the correct return type.
Modifications:
- Introduce PreferredAddressTypeComperator which we use to sort the List so it will contain the preferred address type first.
- Add unit test to verify behaviour
Result:
Include not only preferred addresses in the List that is returned by resolveAll(...)
Motivation:
IKVM.NET seems to ship a bug sun.misc.Unsafe class, for this reason we should better disable our sun.misc.Unsafe usage when we detect IKVM.NET is used.
Modifications:
Check if IKVM.NET is used and if so do not use sun.misc.Unsafe by default.
Result:
Fixes https://github.com/netty/netty/issues/9035 and https://github.com/netty/netty/issues/8916.
Motivation:
Seems like some analyzer / validation tools scan code to detect if it may produce some security risk because of just blindly accept certificates. Such a tool did tag our code because we have such an implementation (which then is actually never be used). We should just change the impl to not do this as it does not matter for us and it makes such tools happier.
Modifications:
Throw CertificateException
Result:
Fixes https://github.com/netty/netty/issues/9032
Motivation:
We should update to netty-tcnative 2.0.25.Final as it fixes a possible segfault on systems that use openssl < 1.0.2 and for which we compiled with gcc.
See https://github.com/netty/netty-tcnative/pull/457
Modifications:
Update netty-tcnative
Result:
No more segfault possible.
Motivation:
The multicast ipv6 test fails on some systems. As I just added it let me ignore it for now while investigating.
Modifications:
Add @ignore
Result:
Stable testsuite while investigate
Motivation:
At the moment we throw a ChannelException if netty_epoll_linuxsocket_setTcpMd5Sig fails. This is inconsistent with other methods which throw a IOException.
Modifications:
Throw IOException
Result:
More correct and consistent exception usage in epoll transport
Motivation:
806dace32d introduce a compilation error due a bad cherry-pick from 4.1
Modifications:
Use correct API for master branch.
Result:
No compile error anymore
Motivation:
We currently only cover ipv4 multicast in the testsuite but we should also have tests for ipv6.
Modifications:
- Add test for ipv6
- Ensure we only try to run multicast test for ipv4 / ipv6 if the loopback interface supports it.
Result:
Better test coverage
Motivation:
When a Channel was closed its isActive() method must return false.
Modifications:
First check for isOpen() before isBound() as isBound() will continue to return true even after the underyling fd was closed.
Result:
Fixes https://github.com/netty/netty/issues/9026.
Motivation:
When netty_epoll_linuxsocket_setTcpMd5Sig fails to init the sockaddr we should throw an exception and not silently return.
Modifications:
Throw exception if init of sockaddr fails.
Result:
Correctly report back error to user.
