Motivation:
SslHandler's wrap method notifies the handshakeFuture and sends a
SslHandshakeCompletionEvent user event down the pipeline before writing
the plaintext that has just been wrapped. It is possible the application
may write as a result of these events and re-enter into wrap to write
more data. This will result in out of sequence data and result in alerts
such as SSLV3_ALERT_BAD_RECORD_MAC.
Modifications:
- SslHandler wrap should write any pending data before notifying
promises, generating user events, or anything else that may create a
re-entry scenario.
Result:
SslHandler will wrap/write data in the same order.
Motivation:
SslHandler owns the responsibility to flush non-application data
(e.g. handshake, renegotiation, etc.) to the socket. However when
TCP Fast Open is supported but the client_hello cannot be written
in the SYN the client_hello may not always be flushed. SslHandler
may not wrap/flush previously written/flushed data in the event
it was not able to be wrapped due to NEED_UNWRAP state being
encountered in wrap (e.g. peer initiated renegotiation).
Modifications:
- SslHandler to flush in channelActive() if TFO is enabled and
the client_hello cannot be written in the SYN.
- SslHandler to wrap application data after non-application data
wrap and handshake status is FINISHED.
- SocketSslEchoTest only flushes when writes are done, and waits
for the handshake to complete before writing.
Result:
SslHandler flushes handshake data for TFO, and previously flushed
application data after peer initiated renegotiation finishes.
Motivation:
At the moment we don't support session caching on the client side at all when using the native SSL implementation. We should at least allow to enable it.
Modification:
Allow to enable session cache for client side but disable ti by default due a JDK bug atm.
Result:
Be able to cache sessions on the client side when using native SSL implementation .
Motivation:
In WriteTimeoutHandler we did make the assumption that the executor which is used to schedule the timeout is the same that is backing the write promise. This may not be true which will cause concurrency issues
Modifications:
Ensure we are on the right thread when try to modify the doubly-linked-list and if not schedule it on the right thread.
Result:
Fixes https://github.com/netty/netty/issues/11053
Motivation:
We need to ensure that we call queue.remove() before we cal writeAndFlush() as this operation may cause an event that also touches the queue and remove from it. If we miss to do so we may see NoSuchElementExceptions.
Modifications:
- Call queue.remove() before calling writeAndFlush(...)
- Add unit test
Result:
Fixes https://github.com/netty/netty/issues/11046
Motivation:
The `!fastOpen` part of `active || !fastOpen` is always false.
Modification:
- Remove `!fastOpen` and keep only `active` as a `flushAtEnd` flag for
`startHandshakeProcessing`;
- Update comment;
Result:
Simplified `flushAtEnd` flag computation in `SslHandler#handlerAdded`.
Support TCP Fast Open for clients and make SslHandler take advantage
Motivation:
- TCP Fast Open allow us to send a small amount of data along side the initial SYN packet when establishing a TCP connection.
- The TLS Client Hello packet is small enough to fit in there, and is also idempotent (another requirement for using TCP Fast Open), so if we can save a round-trip when establishing TLS connections when using TFO.
Modification:
- Add support for client-side TCP Fast Open for Epoll, and also lowers the Linux kernel version requirements to 3.6.
- When adding the SslHandler to a pipeline, if TCP Fast Open is enabled for the channel (and the channel is not already active) then start the handshake early by writing it to the outbound buffer.
- An important detail to note here, is that the outbound buffer is not flushed at this point, like it would for normal handshakes. The flushing happens later as part of establishing the TCP connection.
Result:
- It is now possible for clients (on epoll) to open connections with TCP Fast Open.
- The SslHandler automatically detects when this is the case, and now send its Client Hello message as part of the initial data in the TCP Fast Open flow when available, saving a round-trip when establishing TLS connections.
Co-authored-by: Colin Godsey <crgodsey@gmail.com>
Motivation:
The testGlobalWriteThrottle is flaky and failed our build multiple times now. Lets disable it for now until we had time to investigate
Modifications:
Disable flaky test
Result:
Less failures during build
Motivation:
At the moment we always set SSL_OP_NO_TICKET when building our context. The problem with this is that this also disables resumption for TLSv1.3 in BoringSSL as it only supports stateless resumption for TLSv1.3 which uses tickets.
We should better clear this option when TLSv1.3 is enabled to be able to resume sessions. This is also inline with the OpenJDK which enables this for TLSv1.3 by default as well.
Modifications:
Check for enabled protocols and if TLSv1.3 is set clear SSL_OP_NO_TICKET.
Result:
Be able to resume sessions for TLSv1.3 when using BoringSSL.
Motivation:
File.createTempFile(String, String)` will create a temporary file in the system temporary directory if the 'java.io.tmpdir'. The permissions on that file utilize the umask. In a majority of cases, this means that the file that java creates has the permissions: `-rw-r--r--`, thus, any other local user on that system can read the contents of that file.
This can be a security concern if any sensitive data is stored in this file.
This was reported by Jonathan Leitschuh <jonathan.leitschuh@gmail.com> as a security problem.
Modifications:
Use Files.createTempFile(...) which will use safe-defaults when running on java 7 and later. If running on java 6 there isnt much we can do, which is fair enough as java 6 shouldnt be considered "safe" anyway.
Result:
Create temporary files with sane permissions by default.
Motivation:
Some of the features we want to support can only be supported by some of the SslContext implementations. We should allow to configure these in a consistent way the same way as we do it with Channel / ChannelOption
Modifications:
- Add SslContextOption and add builder methods that take these
- Add OpenSslContextOption and define two options there which are specific to openssl
Result:
More flexible configuration and implementation of SslContext
Motivation:
It was not 100% clear who is responsible calling close() on the InputStream.
Modifications:
Clarify javadocs.
Result:
Related to https://github.com/netty/netty/issues/10974
Co-authored-by: Chris Vest <christianvest_hansen@apple.com>
Motivation:
TLS_FALSE_START slightly changes the "flow" during handshake which may cause suprises for the end-user. We should better disable it by default again and later add a way to enable it for the user.
Modification:
This reverts commit 514d349e1f.
Result:
Restore "old flow" during TLS handshakes.
Motivation:
We didnt correctly filter out TLSv1.3 ciphers when TLSv1.3 is not enabled.
Modifications:
- Filter out ciphers that are not supported due the selected TLS version
- Add unit test
Result:
Fixes https://github.com/netty/netty/issues/10911
Co-authored-by: Bryce Anderson <banderson@twitter.com>
Motivation:
If the given port is already bound, the PcapWriteHandlerTest will sometimes fail.
Modification:
Use a dynamic port using `0`, which is more reliable
Result:
Less Flaky
Motivation:
Creating certificates from a byte[] while lazy parse it is general useful and is also needed by https://github.com/netty/netty-incubator-codec-quic/pull/141
Modifications:
Move classes, rename these and make them public
Result:
Be able to reuse code
Motivation:
We should override the get*ApplicationProtocol() methods in ReferenceCountedOpenSslEngine to make it easier for users to obtain the selected application protocol
Modifications:
Add missing overrides
Result:
Easier for the user to get the selected application protocol (if any)
Motivation:
We should expose some methods as protected to make it easier to write custom SslContext implementations.
This will be reused by the code for https://github.com/netty/netty-incubator-codec-quic/issues/97
Modifications:
- Add protected to some static methods which are useful for sub-classes
- Remove some unused methods
- Move *Wrapper classes to util package and make these public
Result:
Easier to write custom SslContext implementations
Motivation:
We need to ensure we always drain the error stack when a callback throws as otherwise we may pick up the error on a different SSL instance which uses the same thread.
Modifications:
- Correctly drain the error stack if native method throws
- Add a unit test which failed before the change
Result:
Always drain the error stack
Motivation:
When validating PRs we should also at least run one job that uses boringssl
Modifications:
- Add job that uses boringssl
- Cleanup docker compose files
- Fix buffer leak in test
Result:
Also run with boringssl when PRs are validated
Motivation:
When using the JDKs SSLEngineImpl with TLSv1.3 it sometimes returns HandshakeResult.FINISHED multiple times. This can lead to have SslHandshakeCompletionEvents to be fired multiple times.
Modifications:
- Keep track of if we notified before and if so not do so again if we use TLSv1.3
- Add unit test
Result:
Consistent usage of events
Motivation:
We can make use of internalNioBuffer(...) if we cant access the memoryAddress. This at least will reduce the object creations.
Modifications:
Use internalNioBuffer(...) and so reduce the GC
Result:
Less object creation if we can't access the memory address.
